summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Expand)Author
2025-11-09iio: backend: fix kernel-doc to avoid warnings and ensure consistencyKriish Sharma
2025-11-09iio: adc: rohm-bd79124: Use regmap_reg_range()Matti Vaittinen
2025-11-09iio: adc: rohm-bd79112: Use regmap_reg_range()Matti Vaittinen
2025-11-09iio: pressure: adp810: Add driver for adp810 sensorAkhilesh Patil
2025-11-09iio: adc: ad7124: fix possible OOB array accessDavid Lechner
2025-11-09iio: imu: inv_icm45600: Add a missing return statement in probe()Dan Carpenter
2025-11-09iio: adc: ad4080: add support for AD4087Antoniu Miclaus
2025-11-09iio: adc: ad4080: add support for AD4086Antoniu Miclaus
2025-11-09iio: adc: ad4080: add support for AD4083Antoniu Miclaus
2025-11-09iio: accel: bma220: move set_wdt() out of bma220_corePetre Rodan
2025-11-09iio: imu: smi330: Add driverJianping Shen
2025-10-27iio: st_lsm6dsx: Fixed calibrated timestamp calculationMario Tesi
2025-10-20iio: adc: max14001: New driverMarilene Andrade Garcia
2025-10-19iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rateFrancesco Lavra
2025-10-19iio: imu: st_lsm6dsx: Fix measurement unit for odr struct memberFrancesco Lavra
2025-10-19iio: accel: bma220: remove useless includePetre Rodan
2025-10-19iio: accel: bma220: white space cleanupPetre Rodan
2025-10-19iio: adc: ti_am335x_adc: Limit step_avg to valid range for gcc complainsPei Xiao
2025-10-19iio: accel: bma400: Add detail to comments in GEN INTR configurationAkshay Jindal
2025-10-19iio: accel: bma400: Rename activity_event_en() to generic_event_en()Akshay Jindal
2025-10-19iio: accel: bma400: Replace bit shifts with FIELD_PREP() and FIELD_GET()Akshay Jindal
2025-10-19iio: accel: bma400: Use index-based register addressing and lookupAkshay Jindal
2025-10-19iio: accel: bma400: Use macros for generic event configuration valuesAkshay Jindal
2025-10-19iio: accel: bma400: Reorganize and rename register and field macrosAkshay Jindal
2025-10-19iio: health: max30100: Make LED pulse-width configurable via DTShrikant Raskar
2025-10-19iio: adc: ti-ads131e08: return correct error codeDixit Parmar
2025-10-19iio: adc: ad4080: add support for AD4081Antoniu Miclaus
2025-10-19iio: adc: ad4080: add support for AD4084Antoniu Miclaus
2025-10-19iio: adc: ad4080: prepare driver for multi-part supportAntoniu Miclaus
2025-10-19iio: adc: ad4080: fix chip identificationAntoniu Miclaus
2025-10-19iio: imu: inv_icm45600: add I3C driver for inv_icm45600 driverRemi Buisson
2025-10-19iio: imu: inv_icm45600: add SPI driver for inv_icm45600 driverRemi Buisson
2025-10-19iio: imu: inv_icm45600: add I2C driver for inv_icm45600 driverRemi Buisson
2025-10-19iio: imu: inv_icm45600: add IMU IIO accelerometer deviceRemi Buisson
2025-10-19iio: imu: inv_icm45600: add IMU IIO gyroscope deviceRemi Buisson
2025-10-19iio: imu: inv_icm45600: add buffer support in iio devicesRemi Buisson
2025-10-19iio: imu: inv_icm45600: add new inv_icm45600 driverRemi Buisson
2025-10-19iio: accel: bma220: add debugfs reg accessPetre Rodan
2025-10-19iio: accel: bma220: add LPF cut-off frequency mappingPetre Rodan
2025-10-19iio: accel: bma220: add interrupt triggerPetre Rodan
2025-10-19iio: accel: bma220: add i2c watchdog featurePetre Rodan
2025-10-19iio: accel: bma220: add i2c modulePetre Rodan
2025-10-19iio: accel: bma220: use find_match_table fctPetre Rodan
2025-10-19iio: accel: bma220: populate buffer ts in trigger handlerPetre Rodan
2025-10-19iio: accel: bma220: migrate to regmap APIPetre Rodan
2025-10-19iio: accel: bma220: reset registers during init stagePetre Rodan
2025-10-19iio: accel: bma220: turn power supplies onPetre Rodan
2025-10-19iio: accel: bma220: add open firmware tablePetre Rodan
2025-10-19iio: accel: bma220: split original driverPetre Rodan
2025-10-19iio: accel: bma220: cleanup includesPetre Rodan