summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/renesas/Kconfig
AgeCommit message (Collapse)Author
2025-08-20pinctrl: renesas: rzt2h: Add support for RZ/N2HLad Prabhakar
The Renesas RZ/N2H (R9A09G087) SoC shares a similar pin controller architecture with the RZ/T2H (R9A09G077) SoC, differing primarily in the number of supported pins: 576 on RZ/N2H versus 729 on RZ/T2H. Add the necessary pin configuration data and compatible string to enable support for the RZ/N2H SoC in the RZ/T2H pinctrl driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250808133017.2053637-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-08-20pinctrl: renesas: Add support for RZ/T2HThierry Bultel
Add a pin control and GPIO driver for the Renesas RZ/T2H (R9A09G077) SoC. Signed-off-by: Thierry Bultel <thierry.bultel.yh@bp.renesas.com> Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250808133017.2053637-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-07-02pinctrl: renesas: Simplify PINCTRL_RZV2M logicGeert Uytterhoeven
PINCTRL_RZV2M is selected by ARCH_R9A09G011, hence there is no need to depend on the latter. Move the dependency on COMPILE_TEST to the symbol prompt, like is done for all other auto-selected pin control symbols. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/d74843e06f73cd4c6e822d65f606e6042a50a0b7.1750945516.git.geert+renesas@glider.be
2025-07-02pinctrl: renesas: Unify config namingKuninori Morimoto
Renesas SoC has chip number / chip name. Some SoC is using chip number, and some SoC is using chip name on current Renesas pincontrol Kconfig. Let's unify "pin control support for ${CHIP_NUMBER} (${CHIP_NAME}). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/87bjqdraf1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-07-02pinctrl: renesas: Sort Renesas Kconfig configsKuninori Morimoto
Current Renesas Kconfig is randomly arranged. Let's sort it by alphabetical/number order, same as Makefile. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/87cyatrafh.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05pinctrl: renesas: rzg2l: Add support for RZ/V2N SoCLad Prabhakar
Add pinctrl support for the Renesas RZ/V2N SoC by reusing the existing RZ/V2H(P) pin configuration data. The PFC block is nearly identical, with the only difference being the absence of `PCIE1_RSTOUTB` on RZ/V2N. To handle this, the rzv2h_dedicated_pins array is refactored into a common and pcie1 subset. This enables reuse of the common portion across both SoCs, while excluding PCIE1_RSTOUTB for RZ/V2N. This change allows the pinctrl-rzg2l driver to support RZ/V2N without duplicating large parts of the RZ/V2H configuration. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250415130854.242227-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-01-03pinctrl: renesas: rzg2l: Add support for RZ/G3E SoCBiju Das
Add pinctrl driver support for RZ/G3E SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241216195325.164212-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-10-14pinctrl: renesas: Select PINCTRL_RZG2L for RZ/V2H(P) SoCLad Prabhakar
Add explicit selection of the PINCTRL_RZG2L config option for the RZ/V2H(P) (R9A09G057) SoC, ensuring pin control driver is enabled for this SoC. Fixes: 9bd95ac86e70 ("pinctrl: renesas: rzg2l: Add support for RZ/V2H SoC") Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20241010132726.702658-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-21pinctrl: renesas: rzg2l: Select GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHYClaudiu Beznea
The pinctrl-rzg2l driver accesses gpio_chip.irq, which is available only if CONFIG_GPIOLIB_IRQCHIP=y, and uses APIs that are defined only if CONFIG_IRQ_DOMAIN_HIERARCHY=y (irq_chip_*_parent() APIs). On ARCH_RZG2L, CONFIG_IRQ_DOMAIN_HIERARCHY is selected anyway, e.g. by CONFIG_ARM_GIC_V3, but CONFIG_GPIOLIB_IRQCHIP is not (it is on R-Car). Make this explicit at the driver level for a clearer view of the dependencies. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240215124112.2259103-2-claudiu.beznea.uj@bp.renesas.com [geert: select GPIOLIB_IRQCHIP, too] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-20pinctrl: renesas: Initial R8A779H0 (R-Car V4M) PFC supportCong Dang
Add initial pin control support for the R-Car V4M (R8A779H0) SoC, including bias, drive strength and voltage control. Signed-off-by: Cong Dang <cong.dang.xn@renesas.com> [geert: Fixes and cleanups] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/5f59263e75be713dc954007cfeb2c99274c9d761.1706264667.git.geert+renesas@glider.be
2023-10-12pinctrl: renesas: rzn1: Enable missing PINMUXRalph Siemsen
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO pins will be configured as specified by the pinmux in the DTS. This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS, however that was removed, since the RZ/N1 driver does not call any of the generic pinmux functions. Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-10pinctrl: renesas: Remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230307105645.5285-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC supportLUU HOAI
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0) SoC, including bias, drive strength and voltage control. This patch was created based on the Rev.0.51 datasheet. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Add RZ/V2M pin and gpio controller driverPhil Edworthy
Add support for pin and gpio controller driver for RZ/V2M SoC. Based on the RZ/G2L driver. Note that the DETDO and DETMS dedicated pins are currently not documented in the HW manual as to which pin group they are in. HW team has since said that the output level of 1.8V I/O group 4 (for MD0-7, and debugger) is the same as the 1.8V I/O group 3. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-20pinctrl: renesas: Select PINCTRL_RZG2L if ARCH_RZG2L is enabledLad Prabhakar
GPIO (PINCTRL) block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so instead of selecting PINCTRL_RZG2L config for each SoC select PINCTRL_RZG2L config option if ARCH_RZG2L is enabled. The ARCH_RZG2L config option is already selected by ARCH_R9A07G043, ARCH_R9A07G044 and ARCH_R9A07G054. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220406075318.14385-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-20pinctrl: renesas: rzg2l: Add RZ/G2UL supportBiju Das
RZ/G2UL SoC has fewer pins compared to RZ/G2L and the port pin definitions are different compared to RZ/G2L. This patch adds a new compatible to take care of these differences by adding r9a07g043_data with r9a07g043_gpio_configs and rzg2l_dedicated_pins.common. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220401180230.19950-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-02-25pinctrl: renesas: Initial R8A779F0 PFC supportGeert Uytterhoeven
Add initial Pin Function Controller (PFC) support for the Renesas R-Car S4-8 (R8A779F0) SoC, including bias, drive strength and voltage control. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/fd8201da404b7b0897130b254380ffc97f437266.1645457792.git.geert+renesas@glider.be
2022-02-08pinctrl: renesas: Kconfig: Select PINCTRL_RZG2L if RZ/V2L SoC is enabledBiju Das
RZ/V2L uses the RZ/G2L GPIO and pinctrl driver. Enable the RZ/G2L pinctrl driver if RZ/V2L is enabled. Update the description for RZ/V2L pin control support. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220110134659.30424-8-prabhakar.mahadev-lad.rj@bp.renesas.com Link: https://lore.kernel.org/r/20220206194614.13209-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-13pinctrl: renesas: Add RZ/G2L pin and gpio controller driverLad Prabhakar
Add support for pin and gpio controller driver for RZ/G2L SoC. Based on a patch in the BSP by Hien Huynh <hien.huynh.px@renesas.com>. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210727112328.18809-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Initial R8A779A0 (V3U) PFC supportUlrich Hecht
This patch adds initial pinctrl support for the R8A779A0 (V3U) SoC, including bias, drive strength and voltage control. Based on patch by LUU HOAI <hoai.luu.ub@renesas.com>. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-5-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: renesas: Reintroduce SH_PFC for common sh-pfc codeGeert Uytterhoeven
Most, but not all, Renesas pin control drivers use the "sh-pfc" pin control framework. As of commit 8449bfa9e6a9f7ec ("pinctrl: sh-pfc: Collect Renesas related CONFIGs in one place"), the code for this framework is always built when Renesas SoC pin control support is enabled, regardless of whether the enabled pin control drivers need it or not. Fix this by reintroducing the CONFIG_SH_PFC symbol to control inclusion of the "sh-pfc" framework and its dependencies, and selecting it when needed. This reduces kernel size of a typical RZ/A1 or RZ/A2 kernel by more than 6 resp. 11 KiB. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-4-geert+renesas@glider.be
2020-09-15pinctrl: Rename sh-pfc to renesasGeert Uytterhoeven
The drivers/pinctrl/sh-pfc subdirectory was originally created to group pin control drivers for various Renesas SuperH and SH-Mobile platforms. However, the name "sh-pfc" no longer reflects its contents, as the directory now contains pin control drivers for Renesas SuperH, ARM32, and ARM64 SoCs. Hence rename the subdirectory from drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, and the related Kconfig symbol from PINCTRL_SH_PFC to PINCTRL_RENESAS. Rename the git branch in MAINTAINERS, too, for consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-30 18:14:21 +0000