summaryrefslogtreecommitdiff
path: root/drivers/rtc/Kconfig
AgeCommit message (Collapse)Author
2025-12-08rtc: spacemit: MFD_SPACEMIT_P1 as dependenciesTroy Mitchell
RTC_DRV_SPACEMIT_P1 is a subdevice of P1 and should depend on MFD_SPACEMIT_P1 rather than selecting it directly. Using 'select' does not always respect the parent's dependencies, so 'depends on' is the safer and more correct choice. Additionally, the default value depends on MFD_SPACEMIT_P1 rather than ARCH_SPACEMIT. Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com> Acked-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20251118-p1-kconfig-fix-v3-2-8839c5ac5db3@linux.spacemit.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-12-08rtc: Add new rtc-macsmc driver for Apple Silicon MacsHector Martin
Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC, but most of the PMU functionality is abstracted out by the SMC. On T600x machines, the RTC counter must be accessed via the SMC to get full functionality, and it seems likely that future machines will move towards making SMC handle all RTC functionality. The SMC RTC counter access is implemented on all current machines as of the time of this writing, on firmware 12.x. However, the RTC offset (needed to set the time) is still only accessible via direct PMU access. To handle this, we expose the RTC offset as an NVMEM cell from the SPMI PMU device node, and this driver consumes that cell and uses it to compute/set the current time. Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Sven Peter <sven@kernel.org> Signed-off-by: James Calligeros <jcalligeros99@gmail.com> Link: https://patch.msgid.link/20251112-macsmc-subdevs-v5-3-728e4b91fe81@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-12-08rtc: Kconfig: add MC34708 to mc13xxx help textAlexander Kurz
MC34708 is one of the three mfd devices supported by DRV_MC13XXX. Update Kconfig accordingly. Signed-off-by: Alexander Kurz <akurz@blala.de> Link: https://patch.msgid.link/20251011062605.13591-1-akurz@blala.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-11-06rtc: nvvrs: add NVIDIA VRS RTC device driverShubhi Garg
Add support for NVIDIA VRS (Voltage Regulator Specification) RTC device driver. NVIDIA VRS is a Power Management IC (PMIC) that implements a power sequencing solution with I2C interface. The device includes RTC which provides functionality to get/set system time, retain system time across boot, wake system from suspend and shutdown state. Supported platforms: - NVIDIA Jetson AGX Orin Developer Kit - NVIDIA IGX Orin Development Kit - NVIDIA Jetson Orin NX Developer Kit - NVIDIA Jetson Orin Nano Developer Kit Signed-off-by: Shubhi Garg <shgarg@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://patch.msgid.link/20251007135738.487694-4-shgarg@nvidia.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-11-06rtc: atcrtc100: Add ATCRTC100 RTC driverCL Wang
RTC driver for Andes ATCRTC100 Real-Time Clock. Signed-off-by: CL Wang <cl634@andestech.com> Link: https://patch.msgid.link/20250915031439.2680364-4-cl634@andestech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-10-11Merge tag 'rtc-6.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "This cycle, we have a new RTC driver, for the SpacemiT P1. The optee driver gets alarm support. We also get a fix for a race condition that was fairly rare unless while stress testing the alarms. Subsystem: - Fix race when setting alarm - Ensure alarm irq is enabled when UIE is enabled - remove unneeded 'fast_io' parameter in regmap_config New driver: - SpacemiT P1 RTC Drivers: - efi: Remove wakeup functionality - optee: add alarms support - s3c: Drop support for S3C2410 - zynqmp: Restore alarm functionality after kexec transition" * tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits) rtc: interface: Ensure alarm irq is enabled when UIE is enabled rtc: tps6586x: Fix initial enable_irq/disable_irq balance rtc: cpcap: Fix initial enable_irq/disable_irq balance rtc: isl12022: Fix initial enable_irq/disable_irq balance rtc: interface: Fix long-standing race when setting alarm rtc: pcf2127: fix watchdog interrupt mask on pcf2131 rtc: zynqmp: Restore alarm functionality after kexec transition rtc: amlogic-a4: Optimize global variables rtc: sd2405al: Add I2C address. rtc: Kconfig: move symbols to proper section rtc: optee: make optee_rtc_pm_ops static rtc: optee: Fix error code in optee_rtc_read_alarm() rtc: optee: fix error code in probe() dt-bindings: rtc: Convert apm,xgene-rtc to DT schema rtc: spacemit: support the SpacemiT P1 RTC rtc: optee: add alarm related rtc ops to optee rtc driver rtc: optee: remove unnecessary memory operations rtc: optee: fix memory leak on driver removal rtc: x1205: Fix Xicor X1205 vendor prefix dt-bindings: rtc: Fix Xicor X1205 vendor prefix ...
2025-10-05rtc: Kconfig: move symbols to proper sectionAlexandre Belloni
There is only one HID RTC, the following symbols are for on-SoC RTCs Link: https://lore.kernel.org/r/20251005203048.3759240-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-09-16rtc: spacemit: support the SpacemiT P1 RTCAlex Elder
Add support for the RTC found in the SpacemiT P1 PMIC. Initially only setting and reading the time are supported. The PMIC is implemented as a multi-function device. This RTC is probed based on this driver being named in a MFD cell in the simple MFD I2C driver. Signed-off-by: Alex Elder <elder@riscstar.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250825172057.163883-5-elder@riscstar.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-09-16rtc: Add Nuvoton NCT6694 RTC supportMing Yu
This driver supports RTC functionality for NCT6694 MFD device based on USB interface. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Ming Yu <a0282524688@gmail.com> Link: https://lore.kernel.org/r/20250912091952.1169369-8-a0282524688@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-23rtc: pcf85063: add support for RV8063Antoni Pokusinski
Microcrystal RV8063 is a real-time clock with SPI interface. Its functionality is very similar to the RV8263 rtc. Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com> Link: https://lore.kernel.org/r/20250413130755.159373-4-apokusinski01@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: s32g: add NXP S32G2/S32G3 SoC supportCiprian Marian Costea
Add a RTC driver for NXP S32G2/S32G3 SoCs. RTC tracks clock time during system suspend. It can be a wakeup source for the S32G2/S32G3 SoC based boards. The RTC module from S32G2/S32G3 is not battery-powered and it is not kept alive during system reset. Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org> Link: https://lore.kernel.org/r/20250403103346.3064895-3-ciprianmarian.costea@oss.nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-25rtc: sophgo: add rtc support for Sophgo CV1800 SoCJingbao Qiu
Implement the RTC driver for CV1800, which able to provide time alarm. Signed-off-by: Jingbao Qiu <qiujingbao.dlmu@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20250507195626.502240-1-alexander.sverdlin@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-05-24rtc: amlogic: Do not enable by default during compile testingKrzysztof Kozlowski
Enabling the compile test should not cause automatic enabling of all drivers, but only allow to choose to compile them. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250417074640.81363-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-03-17rtc: pcf50633: RemoveDr. David Alan Gilbert
The pcf50633 was used as part of the OpenMoko devices but the support for its main chip was recently removed in: commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support") See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/ Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250311014959.743322-3-linux@treblig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-09rtc: RTC_DRV_SPEAR should not default to y when compile-testingGeert Uytterhoeven
Merely enabling compile-testing should not enable additional functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/7b8eefe3b0150101ba01c3ea55e45aa3134059ba.1733243007.git.geert+renesas@glider.be Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-12rtc: support for the Amlogic on-chip RTCYiting Deng
This is the third amlogic driver. The RTC hardware of A4 SoC is different from the previous one. This RTC hardware includes a timing function and an alarm function. But the existing has only timing function, alarm function is using the system clock to implement a virtual alarm. Add the RTC driver to support it. Signed-off-by: Yiting Deng <yiting.deng@amlogic.com> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://lore.kernel.org/r/20241112-rtc-v6-2-a71b60d2f354@amlogic.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-11rtc: add driver for Marvell 88PM886 PMIC RTCKarel Balej
RTC lives on the chip's base register page. Add the relevant register definitions and implement a basic set/read time functionality. Tested with the samsung,coreprimevelte smartphone which contains this PMIC and whose vendor kernel tree has also served as the sole reference for this. Signed-off-by: Karel Balej <balejk@matfyz.cz> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-11rtc: pcf8563: Switch to regmapNobuhiro Iwamatsu
Switch the i2c_transfer methods to regmap APIs. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20241010084949.3351182-3-iwamatsu@nigauri.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-01rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoCClaudiu Beznea
The RTC IP (RTCA-3) available on the Renesas RZ/G3S SoC has calendar count mode and binary count mode (selectable though RCR2.CNTMD) capabilities, alarm capabilities, clock error correction capabilities. It can generate alarm, period, carry interrupts. Add a driver for RTCA-3 IP. The driver implements calendar count mode (as the conversion b/w RTC and system time is simpler, done with bcd2bin(), bin2bcd()), read and set time, read and set alarm, read and set an offset. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20241030110120.332802-6-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-09-25Merge tag 'rtc-6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "More conversions of DT bindings to yaml. There is one new driver, for the DFRobot SD2405AL and support for important features of the stm32 RTC. Summary: New driver: - DFRobot SD2405AL Drivers: - stm32: add alarm A out and LSCO support - sun6i: disable automatic clock input switching - m48t59: set range" * tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rc5t619: use proper module tables rtc: m48t59: set range dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property rtc: m48t59: Remove division condition with direct comparison rtc: at91sam9: fix OF node leak in probe() error path rtc: sun6i: disable automatic clock input switching dt-bindings: rtc: Drop non-trivial duplicate compatibles dt-bindings: vendor-prefixes: Add DFRobot. dt-bindings: rtc: Add support for SD2405AL. rtc: Add driver for SD2405AL rtc: s35390a: Drop vendorless compatible string from match table rtc: twl: convert comma to semicolon dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML rtc: stm32: add alarm A out feature rtc: stm32: add Low Speed Clock Output (LSCO) support rtc: stm32: add pinctrl and pinmux interfaces dt-bindings: rtc: stm32: describe pinmux nodes
2024-09-12rtc: Add driver for SD2405ALTóth János
Add support for the DFRobot SD2405AL I2C RTC Module. Datasheet: https://image.dfrobot.com/image/data/TOY0021/SD2405AL%20datasheet%20(Angelo%20v0.1).pdf Product: https://www.dfrobot.com/product-1600.html To instantiate (assuming device is connected to I2C-1) as root: echo sd2405al 0x32 > /sys/bus/i2c/devices/i2c-1/new_device as user: echo 'sd2405al 0x32' | sudo tee /sys/class/i2c-adapter/i2c-1/new_device The driver is tested with: + hwclock + tools/testing/selftests/rtc/setdate + tools/testing/selftests/rtc/rtctest Reviewed-by: Csókás Bence <csokas.bence@prolan.hu> Signed-off-by: Tóth János <gomba007@gmail.com> Link: https://lore.kernel.org/r/20240830-rtc-sd2405al-v7-1-2f7102621b1d@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-08-28rtc: support i.MX95 BBM RTCPeng Fan
The BBM module provides RTC feature. To i.MX95, this module is managed by System Manager and exported System Control Management Interface(SCMI). Linux could use i.MX SCMI BBM Extension protocol to use RTC feature. This driver is to use SCMI interface to get/set RTC. Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Message-Id: <20240823-imx95-bbm-misc-v2-v8-6-e600ed9e9271@nxp.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-08-14rtc: stm32: add Low Speed Clock Output (LSCO) supportValentin Caron
RTC is able to output on a pin the "LSE" internal clock. STM32 RTC is now registered as a clock provider. It provides rtc_lsco clock, that means RTC_LSCO is output on either RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property. The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because RTC_LSCO can be early required by devices needed it to init. Add LSCO in pinmux functions. Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup" power domain, it is not reset during shutdown or reboot. So force LSCO disable at probe. Co-developed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20240722160022.454226-4-valentin.caron@foss.st.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-08-14rtc: stm32: add pinctrl and pinmux interfacesValentin Caron
STM32 RTC is capable to handle 3 specific pins of the soc. "out1, out2 and out2_rmp". To handle this, we use pinctrl framework. There is a single pin per group. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240722160022.454226-3-valentin.caron@foss.st.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-04-17rtc: Add driver for Epson RX8111Waqar Hameed
Epson RX8111 is an RTC with alarm, timer and timestamp functionality. Add a basic driver with support for only reading/writing time (for now). Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/0c3e1b03f276da47b26ac50f5d0ddf5c67aabe5c.1700491765.git.waqar.hameed@axis.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-02-29rtc: mt6397: select IRQ_DOMAIN instead of depending on itRandy Dunlap
IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Relying on it being set for a dependency is risky. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on" for IRQ_DOMAIN to "select" for RTC_DRV_MT6397. Fixes: 04d3ba70a3c9 ("rtc: mt6397: add IRQ domain dependency") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Eddie Huang <eddie.huang@mediatek.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: Marc Zyngier <maz@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Peter Rosin <peda@axentia.se> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240213050258.6167-1-rdunlap@infradead.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-15rtc: max31335: add driver supportAntoniu Miclaus
RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with Integrated MEMS Resonator. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231120120114.48657-2-antoniu.miclaus@analog.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: lpc24xx: add missing dependencyAntoniu Miclaus
The driver depends on COMMON_CLK. Add the dependency in Kconfig. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20231114114532.37840-1-antoniu.miclaus@analog.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-01-08rtc: tps6594: Add driver for TPS6594 RTCEsteban Blanc
TPS6594 PMIC is a MFD. This patch adds support for the RTC found inside TPS6594 family of PMIC. Alarm is also supported. Signed-off-by: Esteban Blanc <eblanc@baylibre.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20231107094701.2223486-1-eblanc@baylibre.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-12-17rtc: Add driver for Nuvoton ma35d1 rtc controllerJacky Huang
The ma35d1 rtc controller provides real-time and calendar messaging capabilities. It supports programmable time tick and alarm match interrupts. The time and calendar messages are expressed in BCD format. This driver supports the built-in rtc controller of the ma35d1. It enables setting and reading the rtc time and configuring and reading the rtc alarm. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Link: https://lore.kernel.org/r/20230925070251.28-4-ychuang570808@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-16rtc: Add support for the SSD202D RTCRomain Perier
Newer SigmaStar SSD202D SoCs contain a Real Time Clock, capable of running while the system is sleeping (battery powered), this is not the case with the other RTC on older SoCs. This adds basic support for this RTC block. Signed-off-by: Romain Perier <romain.perier@gmail.com> Co-developed-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20230913151606.69494-2-romain.perier@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-10-13rtc: imxdi: Soften dependencies for improved compile coverageUwe Kleine-König
The driver compiles fine on x86_64, so soften the dependencies to ARCH_MXC || COMPILE_TEST. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231002080529.2535610-2-u.kleine-koenig@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-27rtc: bq4802: add sparc dependencyArnd Bergmann
The added HAS_IOPORT dependency might not actually be necessary as Geert points out, but the driver is also only used on one architecture. Sparc is also a special case here since it converts port numbers into virtual addresses rather than having them mapped into a particular part of the __iomem address space, so the difference is actually not important here. Add a dependency on sparc, but allow compile-testing otherwise, to make this clearer without anyone having to spend much time modernizing the driver beyond that. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: David S. Miller <davem@davemloft.net> Link: https://lore.kernel.org/all/CAMuHMdWEx0F=fNei4Bz_JPkuvoaN-+zk08h0i8KnSi_VjO615g@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230719192835.1025406-1-arnd@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-27rtc: pcf2127: add support for PCF2131 RTCHugo Villeneuve
This RTC is very similar in functionality to the PCF2127/29. Basically it: -supports two new control registers at offsets 4 and 5 -supports a new reset register (not implemented in this driver) -supports 4 tamper detection functions instead of 1 -has no nvmem (like the PCF2129) -has two output interrupt pins Because of that, most of the register addresses are very different, although they still follow the same layout. For example, the tamper registers have a different base address, but the offsets are all the same. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20230622145800.2442116-12-hugo@hugovil.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-07-03Merge tag 'rtc-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "The isl1208 dirver was reworked tobe able to work as part of an MFD. All the Loongson chips are now supported through a new driver, the old one is removed. Summary: Subsystem: - Switch i2c drivers back to use .probe() - Constify pointers to hwmon_channel_info New driver: - Loongson on chip RTC, replacing the Loongson 1 only driver Drivers: - isl1208: cleanup and support for RAA215300 - st-lpc: cleanups - stm32: fix wakeup" * tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits) rtc: Add rtc driver for the Loongson family chips rtc: Remove the Loongson-1 RTC driver dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles rtc: rv3028: make rv3028 probeable from userspace rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 rtc: isl1208: Add isl1208_set_xtoscb() rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] rtc: isl1208: Make similar I2C and DT-based matching table rtc: isl1208: Drop name variable dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties dt-bindings: rtc: isl1208: Convert to json-schema rtc: st-lpc: Simplify clk handling in st_rtc_probe() rtc: st-lpc: Release some resources in st_rtc_probe() in case of error rtc: stm32: remove dedicated wakeup management dt-bindings: rtc: restrict node name suffixes rtc: add HAS_IOPORT dependencies rtc: Switch i2c drivers back to use .probe() rtc: rv3032: constify pointers to hwmon_channel_info rtc: isl12022: constify pointers to hwmon_channel_info rtc: ds3232: constify pointers to hwmon_channel_info ...
2023-06-26rtc: Add rtc driver for the Loongson family chipsBinbin Zhou
The Loongson family chips use an on-chip counter 0 (Time Of Year counter) as the RTC. We will refer to them as rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # LS7A Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-06-26rtc: Remove the Loongson-1 RTC driverBinbin Zhou
Remove the ls1x-rtc driver as it is obsolete. We will continue to support the ls1x RTC in the upcoming Loongson unified RTC driver rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: zhao zhang <zhzhl555@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-06-06rtc: add HAS_IOPORT dependenciesNiklas Schnelle
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/20230522105049.1467313-31-schnelle@linux.ibm.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-15mfd: rk808: Split into core and i2cSebastian Reichel
Split rk808 into a core and an i2c part in preparation for SPI support. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> # for RTC Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64, Quartz64 Model A + B Tested-by: Vincent Legoll <vincent.legoll@gmail.com> # Pine64 QuartzPro64 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-6-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-03-17rtc: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIREConor Dooley
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the Microchip FPGA RTC driver to use the new symbol. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230309204452.969574-5-conor@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-03-03Merge tag 'rtc-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A few drivers got some nice cleanups and a new driver are making the bulk of the changes. Subsystem: - allow rtc_read_alarm without read_alarm callback New driver: - NXP BBNSM module RTC Drivers: - use IRQ flags from fwnode when available - abx80x: nvmem support - brcmstb-waketimer: add non-wake alarm support - ingenic: provide CLK32K clock - isl12022: cleanups - moxart: switch to using gpiod API - pcf85363: allow setting quartz load - pm8xxx: cleanups and support for setting time - rv3028, rv3032: add ACPI support" * tag 'rtc-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (64 commits) rtc: pm8xxx: add support for nvmem offset dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset rtc: abx80x: Add nvmem support rtc: rx6110: Remove unused of_gpio,h rtc: efi: Avoid spamming the log on RTC read failure rtc: isl12022: sort header inclusion alphabetically rtc: isl12022: Join string literals back rtc: isl12022: Drop unneeded OF guards and of_match_ptr() rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L rtc: isl12022: Get rid of unneeded private struct isl12022 rtc: pcf85363: add support for the quartz-load-femtofarads property dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding rtc: allow rtc_read_alarm without read_alarm callback rtc: rv3032: add ACPI support rtc: rv3028: add ACPI support rtc: bbnsm: Add the bbnsm rtc support rtc: jz4740: Register clock provider for the CLK32K pin rtc: jz4740: Use dev_err_probe() rtc: jz4740: Use readl_poll_timeout dt-bindings: rtc: Add #clock-cells property ...
2023-02-22rtc: bbnsm: Add the bbnsm rtc supportJacky Bai
The BBNSM module includes a real time counter with alarm. Add a RTC driver for this function. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230215024117.3357341-3-ping.bai@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: jz4740: Register clock provider for the CLK32K pinPaul Cercueil
On JZ4770 and JZ4780, the CLK32K pin is configurable. By default, it is configured as a GPIO in input mode, and its value can be read through GPIO PD14. With this change, clients can now request the 32 kHz clock on the CLK32K pin, through Device Tree. This clock is simply a pass-through of the input oscillator's clock with enable/disable operations. This will permit the WiFi/Bluetooth chip to work on the MIPS CI20 board, which does source one of its clocks from the CLK32K pin. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20230129120442.22858-5-paul@crapouillou.net Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-01rtc: remove v3020 driverArnd Bergmann
The v3020 RTC driver was exclusively used by the now removed cm-x300.c machine. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-kernel@vger.kernel.org Cc: linux-rtc@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-12-21Merge tag 'mfd-next-6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Ampere Computing SMpro - Add support for TI TPS65219 PMIC New Functionality: - Add support for multiple devices of the same type; rk808 Fix-ups: - Convert a bunch of I2C class drivers over to .probe_new() - Remove superfluous includes; mc13xxx-*, palmas, timberdale - Use correct includes for GPIO handling; madera-core - Convert to GPIOD; twl6040 - Remove unused platform data handling; twl6040 - Device Tree changes; many - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld - Add support for modules; palmas - Enable COMPILE_TEST support; intel_soc_pmic* - Trivial: spelling / whitespace fixes; mc13xxx-spi - Replace old PM helpers with new ones; many - Convert deprecated mask_invert usage to unmask_base; many - Use devm_*() calls; qcom_rpm - MAINTAINER fix-ups - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc, stm32-lptimer, qcom_rpm, rohm-* Bug Fixes: - Add bounds / error checking; mt6360-core - No sleeping inside critical sections; axp20x - Fix missing dependencies; ROHM_BD957XMUF - Repair error paths; qcom-pm8008" * tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits) dt-bindings: mfd: da9062: Correct file name for watchdog mfd: pm8008: Fix return value check in pm8008_probe() mfd: rohm: Use dev_err_probe() mfd: Drop obsolete dependencies on COMPILE_TEST dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource() mfd: rohm-bd9576: Convert to i2c's .probe_new() mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource() dt-bindings: Fix maintainer email for a few ROHM ICs mfd: palmas: Use device_get_match_data() to simplify the code Input: Add tps65219 interrupt driven powerbutton mfd: tps65219: Add driver for TI TPS65219 PMIC mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ mfd: wcd934x: Convert irq chip to config regs mfd: tps65090: Replace irqchip mask_invert with unmask_base mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base mfd: stpmic1: Fix swapped mask/unmask in irq chip mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base ...
2022-12-15rtc: isl12026: drop obsolete dependency on COMPILE_TESTJean Delvare
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20221124154359.039be06c@endymion.delvare Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-12-07mfd: Remove dm355evm_msp driverArnd Bergmann
The DaVinci DM355EVM platform is gone after the removal of all unused board files, so the MTD device along with its sub-devices can be removed as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221019152947.3857217-7-arnd@kernel.org
2022-11-15rtc: remove davinci rtc driverArnd Bergmann
The Davinci dm365 SoC support was removed, so the rtc driver has no remaining users. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20221019152947.3857217-9-arnd@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: switch to using regmap APIRasmus Villemoes
The regmap abstraction allows us to avoid the private i2c transfer helpers, and also offers some nice utility functions such as the regmap_update_bits family. While at it, simplify the code even more by not keeping track of ->write_enabled: rtc_set_time is not a hot path, so one extra i2c read doesn't hurt (regmap_update_bits elides the write when the bits are already as desired). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-9-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-12-30 16:01:12 +0000