| Age | Commit message (Collapse) | Author |
|---|
|
Even though a peer may have already received a
non-zero value for "RDS_EXTHDR_NPATHS" from a node in the past,
the current peer may not.
Therefore it is important to initiate another rds_send_ping()
after a re-connect to any peer:
It is unknown at that time if we're still talking to the same
instance of RDS kernel modules on the other side.
Otherwise, the peer may just operate on a single lane
("c_npaths == 0"), not knowing that more lanes are available.
However, if "c_with_sport_idx" is supported,
we also need to check that the connection we accepted on lane#0
meets the proper source port modulo requirement, as we fan out:
Since the exchange of "RDS_EXTHDR_NPATHS" and "RDS_EXTHDR_SPORT_IDX"
is asynchronous, initially we have no choice but to accept an incoming
connection (via "accept") in the first slot ("cp_index == 0")
for backwards compatibility.
But that very connection may have come from a different lane
with "cp_index != 0", since the peer thought that we already understood
and handled "c_with_sport_idx" properly, as indicated by a previous
exchange before a module was reloaded.
In short:
If a module gets reloaded, we recover from that, but do *not*
allow a downgrade to support fewer lanes.
Downgrades would require us to merge messages from separate lanes,
which is rather tricky with the current RDS design.
Each lane has its own sequence number space and all messages
would need to be re-sequenced as we merge, all while
handling "RDS_FLAG_RETRANSMITTED" and "cp_retrans" properly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of just blocking the sender until "c_npaths" is known
(it gets updated upon the receipt of a MPRDS PONG message),
simply use the first lane (cp_index#0).
But just using the first lane isn't enough.
As soon as we enqueue messages on a different lane, we'd run the risk
of out-of-order delivery of RDS messages.
Earlier messages enqueued on "cp_index == 0" could be delivered later
than more recent messages enqueued on "cp_index > 0", mostly because of
possible head of line blocking issues causing the first lane to be
slower.
To avoid that, we simply take a snapshot of "cp_next_tx_seq" at the
time we're about to fan-out to more lanes.
Then we delay the transmission of messages enqueued on other lanes
with "cp_index > 0" until cp_index#0 caught up with the delivery of
new messages (from "cp_send_queue") as well as in-flight
messages (from "cp_retrans") that haven't been acknowledged yet
by the receiver.
We also add a new counter "mprds_catchup_tx0_retries" to keep track
of how many times "rds_send_xmit" had to suspend activities,
because it was waiting for the first lane to catch up.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Quick clean up to avoid checkpatch errors when adding members to
this struct (Prefer kernel type 'u64' over 'uint64_t').
No functional changes added.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When canceling the reconnect worker, care must be taken to reset the
reconnect-pending bit. If the reconnect worker has not yet been
scheduled before it is canceled, the reconnect-pending bit will stay
on forever.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In cases where the server (the node with the higher IP-address)
in an RDS/TCP connection is overwhelmed it is possible that the
socket that was just accepted is chock-full of messages, up to
the limit of what the socket receive buffer permits.
Subsequently, "rds_tcp_data_ready" won't be called anymore,
because there is no more space to receive additional messages.
Nor was it called prior to the point of calling "rds_tcp_set_callbacks",
because the "sk_data_ready" pointer didn't even point to
"rds_tcp_data_ready" yet.
We fix this by simply kick-starting the receive-worker
for all cases where the socket state is neither
"TCP_CLOSE_WAIT" nor "TCP_CLOSE".
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged by the
TCP stack of a peer, rds_tcp_write_space() goes on to discard
prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages
away.
The dequeuing of messages in RDS/TCP is done either from the
"sk_data_ready" callback pointing to rds_tcp_data_ready()
(the most common case), or from the receive worker pointing
to rds_tcp_recv_path() which is called for as long as the
connection is "RDS_CONN_UP".
However, as soon as rds_conn_path_drop() is called for whatever reason,
including "DR_USER_RESET", "cp_state" transitions to "RDS_CONN_ERROR",
and rds_tcp_restore_callbacks() ends up restoring the callbacks
and thereby disabling message receipt.
So messages already acknowledged to the sender were dropped.
Furthermore, the "->shutdown" callback was always called
with an invalid parameter ("RCV_SHUTDOWN | SEND_SHUTDOWN == 3"),
instead of the correct pre-increment value ("SHUT_RDWR == 2").
inet_shutdown() returns "-EINVAL" in such cases, rendering
this call a NOOP.
So we change rds_tcp_conn_path_shutdown() to do the proper
"->shutdown(SHUT_WR)" call in order to signal EOF to the peer
and make it transition to "TCP_CLOSE_WAIT" (RFC 793).
This should make the peer also enter rds_tcp_conn_path_shutdown()
and do the same.
This allows us to dequeue all messages already received
and acknowledged to the peer.
We do so, until we know that the receive queue no longer has data
(skb_queue_empty()) and that we couldn't have any data
in flight anymore, because the socket transitioned to
any of the states "CLOSING", "TIME_WAIT", "CLOSE_WAIT",
"LAST_ACK", or "CLOSE" (RFC 793).
However, if we do just that, we suddenly see duplicate RDS
messages being delivered to the application.
So what gives?
Turns out that with MPRDS and its multitude of backend connections,
retransmitted messages ("RDS_FLAG_RETRANSMITTED") can outrace
the dequeuing of their original counterparts.
And the duplicate check implemented in rds_recv_local() only
discards duplicates if flag "RDS_FLAG_RETRANSMITTED" is set.
Rather curious, because a duplicate is a duplicate; it shouldn't
matter which copy is looked at and delivered first.
To avoid this entire situation, we simply make the sender discard
messages from the send-queue right from within
rds_tcp_conn_path_shutdown(). Just like rds_tcp_write_space() would
have done, were it called in time or still called.
This makes sure that we no longer have messages that we know
the receiver already dequeued sitting in our send-queue,
and therefore avoid the entire "RDS_FLAG_RETRANSMITTED" fiasco.
Now we got rid of the duplicate RDS message delivery, but we
still run into cases where RDS messages are dropped.
This time it is due to the delayed setting of the socket-callbacks
in rds_tcp_accept_one() via either rds_tcp_reset_callbacks()
or rds_tcp_set_callbacks().
By the time rds_tcp_accept_one() gets there, the socket
may already have transitioned into state "TCP_CLOSE_WAIT",
but rds_tcp_state_change() was never called.
Subsequently, "->shutdown(SHUT_WR)" did not happen either.
So the peer ends up getting stuck in state "TCP_FIN_WAIT2".
We fix that by checking for states "TCP_CLOSE_WAIT", "TCP_LAST_ACK",
or "TCP_CLOSE" and drop the freshly accepted socket in that case.
This problem is observable by running "rds-stress --reset"
frequently on either of the two sides of a RDS connection,
or both while other "rds-stress" processes are exchanging data.
Those "rds-stress" processes reported out-of-sequence
errors, with the expected sequence number being smaller
than the one actually received (due to the dropped messages).
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upon "sendmsg", RDS/TCP selects a backend connection based
on a hash calculated from the source-port ("RDS_MPATH_HASH").
However, "rds_tcp_accept_one" accepts connections
in the order they arrive, which is non-deterministic.
Therefore the mapping of the sender's "cp->cp_index"
to that of the receiver changes if the backend
connections are dropped and reconnected.
However, connection state that's preserved across reconnects
(e.g. "cp_next_rx_seq") relies on that sender<->receiver
mapping to never change.
So we make sure that client and server of the TCP connection
have the exact same "cp->cp_index" across reconnects by
encoding "cp->cp_index" in the lower three bits of the
client's TCP source port.
A new extension "RDS_EXTHDR_SPORT_IDX" is introduced,
that allows the server to tell the difference between
clients that do the "cp->cp_index" encoding, and
legacy clients that pick source ports randomly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new extension header type RDSV3_EXTHDR_RDMA_BYTES for
an RDMA initiator to exchange rdma byte counts to its target.
Currently, RDMA operations cannot precisely account how many bytes a
peer just transferred via RDMA, which limits per-connection statistics
and future policy (e.g., monitoring or rate/cgroup accounting of RDMA
traffic).
In this patch we expand rds_message_add_extension to accept multiple
extensions, and add new flag to RDS header: RDS_FLAG_EXTHDR_EXTENSION,
along with a new extension to RDS header: rds_ext_header_rdma_bytes.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged
by the TCP stack of a peer, "rds_tcp_write_space()" goes on
to discard prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages away.
Unfortunately, that is *not* the case since the introduction of MPRDS:
commit 1a0e100fb2c96 "RDS: TCP: Enable multipath RDS for TCP"
A new function "rds_tcp_accept_one_path" was introduced,
which is entitled to return "NULL", if no connection path is currently
available.
Unfortunately, this happens after the "->accept()" call, and the new socket
often already contains messages, since the peer already transitioned
to "RDS_CONN_UP" on behalf of "TCP_ESTABLISHED".
That's also the case after this [1]:
commit 1a0e100fb2c96 "RDS: TCP: Force every connection to be initiated by
numerically smaller IP address"
which tried to address the situation of pending data by only transitioning
connections from a smaller IP address to "RDS_CONN_UP".
But even in those cases, and in particular if the "RDS_EXTHDR_NPATHS"
handshake has not occurred yet, and therefore we're working with
"c_npaths <= 1", "c_conn[0]" may be in a state distinct from
"RDS_CONN_DOWN", and therefore all messages on the just accepted socket
will be tossed away.
This fix changes "rds_tcp_accept_one":
* If connected from a peer with a larger IP address, the new socket
will continue to get closed right away.
With commit [1] above, there should not be any messages
in the socket receive buffer, since the peer never transitioned
to "RDS_CONN_UP".
Therefore it should be okay to not make any efforts to dispatch
the socket receive buffer.
* If connected from a peer with a smaller IP address,
we call "rds_tcp_accept_one_path" to find a free slot/"path".
If found, business goes on as usual.
If none was found, we save/stash the newly accepted socket
into "rds_tcp_accepted_sock", in order to not lose any
messages that may have arrived already.
We then return from "rds_tcp_accept_one" with "-ENOBUFS".
Later on, when a slot/"path" does become available again
(e.g. state transitioned to "RDS_CONN_DOWN",
or HS extension header was received with "c_npaths > 1")
we call "rds_tcp_conn_slots_available" that simply re-issues
a "rds_tcp_accept_one_path" worker-callback and picks
up the new socket from "rds_tcp_accepted_sock", and thereby
continuing where it left with "-ENOBUFS" last time.
Since a new slot has become available, those messages
won't be lost, since processing proceeds as if that slot
had been available the first time around.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RDS connections carry a state "rds_conn_path::cp_state"
and transitions from one state to another and are conditional
upon an expected state: "rds_conn_path_transition."
There is one exception to this conditionality, which is
"RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop"
regardless of what state the condition is currently in.
But as soon as a connection enters state "RDS_CONN_ERROR",
the connection handling code expects it to go through the
shutdown-path.
The RDS/TCP multipath changes added a shortcut out of
"RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING"
via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change").
A subsequent "rds_tcp_reset_callbacks" can then transition
the state to "RDS_CONN_RESETTING" with a shutdown-worker queued.
That'll trip up "rds_conn_init_shutdown", which was
never adjusted to handle "RDS_CONN_RESETTING" and subsequently
drops the connection with the dreaded "DR_INV_CONN_STATE",
which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever.
So we do two things here:
a) Don't shortcut "RDS_CONN_ERROR", but take the longer
path through the shutdown code.
b) Add "RDS_CONN_RESETTING" to the expected states in
"rds_conn_init_shutdown" so that we won't error out
and get stuck, if we ever hit weird state transitions
like this again."
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260122055213.83608-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RDS was written to require ordered workqueues for "cp->cp_wq":
Work is executed in the order scheduled, one item at a time.
If these workqueues are shared across connections,
then work executed on behalf of one connection blocks work
scheduled for a different and unrelated connection.
Luckily we don't need to share these workqueues.
While it obviously makes sense to limit the number of
workers (processes) that ought to be allocated on a system,
a workqueue that doesn't have a rescue worker attached,
has a tiny footprint compared to the connection as a whole:
A workqueue costs ~900 bytes, including the workqueue_struct,
pool_workqueue, workqueue_attrs, wq_node_nr_active and the
node_nr_active flex array. Each connection can have up to 8
(RDS_MPATH_WORKERS) paths for a worst case of ~7 KBytes per
connection. While an RDS/IB connection totals only ~5 MBytes.
So we're getting a signficant performance gain
(90% of connections fail over under 3 seconds vs. 40%)
for a less than 0.02% overhead.
RDS doesn't even benefit from the additional rescue workers:
of all the reasons that RDS blocks workers, allocation under
memory pressue is the least of our concerns. And even if RDS
was stalling due to the memory-reclaim process, the work
executed by the rescue workers are highly unlikely to free up
any memory. If anything, they might try to allocate even more.
By giving each connection path its own workqueues, we allow
RDS to better utilize the unbound workers that the system
has available.
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-3-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds a per connection workqueue which can be initialized
and used independently of the globally shared rds_wq.
This patch is the first in a series that aims to address tcp ack
timeouts during the tcp socket shutdown sequence.
This initial refactoring lays the ground work needed to alleviate
queue congestion during heavy reads and writes. The independently
managed queues will allow shutdowns and reconnects respond more quickly
before the peer(s) timeout waiting for the proper acks.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-2-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca703 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the old days, RDS used FMR (Fast Memory Registration) to register
IB MRs to be used by RDMA. A newer and better verbs based
registration/de-registration method called FRWR (Fast Registration
Work Request) was added to RDS by commit 1659185fb4d0 ("RDS: IB:
Support Fastreg MR (FRMR) memory registration mode") in 2016.
Detection and enablement of FRWR was done in commit 2cb2912d6563
("RDS: IB: add Fastreg MR (FRMR) detection support"). But said commit
added an extern bool prefer_frmr, which was not used by said commit -
nor used by later commits. Hence, remove it.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250905101958.4028647-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Per the RDS 3.1 spec [1], RDS extension headers EXTHDR_NPATHS and
EXTHDR_GEN_NUM are be16 and be32 values respectively, exchanged during
normal operations over-the-wire (RDS Ping/Pong). This contrasts their
declarations as host endian unsigned ints.
Fix the annotations across occurrences. Flagged by Sparse.
[1] https://oss.oracle.com/projects/rds/dist/documentation/rds-3.1-spec.html
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-5-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
jhash_1word accepts host endian inputs while rs_bound_port is a be16
value (sockaddr_in6.sin6_port). Use ntohs() for consistency.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-4-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__ipv6_addr_jhash (wrapper around jhash2()) and __inet_ehashfn (wrapper
around jhash_3words()) work with u32 (host endian) values but accept big
endian inputs. Declare the local variables as big endian to avoid
unnecessary casts.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-3-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both constants are 1<<3, but EPOLLERR uses the correct annotations.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-2-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GFP_NOWAIT already includes __GFP_NOWARN, so let's remove the redundant
__GFP_NOWARN.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250810072944.438574-3-rongqianfeng@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rds_tcp_accept_one() starts with a pretty much verbatim
copy of kernel_accept(). Might as well use the real thing...
That code went into mainline in 2009, kernel_accept()
had been added in Aug 2006, the copyright on rds/tcp_listen.c
is "Copyright (c) 2006 Oracle", so it's entirely possible
that it predates the introduction of kernel_accept().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20250713180134.GC1880847@ZenIV
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling as flagged by codespell.
With these changes in place codespell only flags false positives
in net/rds.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250619-rds-minor-v1-2-86d2ee3a98b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the endianness annotation of port assignments:
A host byte order value (RDS_TCP_PORT) is correctly converted to
network byte order (big endian) using htons. But it is then cast back to
host byte order before assigning to a variable that expects a big endian
value. Address this by dropping the cast.
This is not a bug because, while the endian annotation is changed by
this patch, the assigned value is unchanged.
Also correct the endianness of address assignment.
A host byte order value (INADDR_ANY) is incorrectly assigned as-is to
a variable that expects a big endian value. Address this by converting
the value to network byte order (big endian).
This is not a bug because INADDR_ANY is 0, which is isomorphic
with regards to endian conversions. IOW, while the endian annotation
is changed by this patch, the assigned value is unchanged.
Incorrect endian annotations appear to date back to IPv4-only code added
by commit 70041088e3b9 ("RDS: Add TCP transport to RDS").
Flagged by Sparse.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250619-rds-minor-v1-1-86d2ee3a98b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The strncpy() function is actively dangerous to use since it may not
NULL-terminate the destination string, resulting in potential memory
content exposures, unbounded reads, or crashes.
Link: https://github.com/KSPP/linux/issues/90
In addition, strscpy_pad is more appropriate because it also zero-fills
any remaining space in the destination if the source is shorter than
the provided buffer size.
Signed-off-by: Baris Can Goral <goralbaris@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250521161036.14489-1-goralbaris@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rds_page_remainder is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-16-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rds_page_remainder_alloc() obtains the current CPU with get_cpu() while
disabling preemption. Then the CPU number is used to access the per-CPU
data structure via per_cpu().
This can be optimized by relying on local_bh_disable() to provide a
stable CPU number/ avoid migration and then using this_cpu_ptr() to
retrieve the data structure.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-15-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rds_page_remainder_alloc() is invoked from a preemptible context or a
tasklet. There is no need to disable interrupts for locking.
Use local_bh_disable() instead of local_irq_save() for locking.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-14-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc5).
Conflicts:
drivers/net/ethernet/cadence/macb_main.c
fa52f15c745c ("net: cadence: macb: Synchronize stats calculations")
75696dd0fd72 ("net: cadence: macb: Convert to get_stats64")
https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_sriov.c
79990cf5e7ad ("ice: Fix deinitializing VF in error path")
a203163274a4 ("ice: simplify VF MSI-X managing")
net/ipv4/tcp.c
18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace")
297d389e9e5b ("net: prefix devmem specific helpers")
net/mptcp/subflow.c
8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join")
c3349a22c200 ("mptcp: consolidate subflow cleanup")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
strncpy() is deprecated for NUL-terminated destination buffers. Use
strscpy_pad() instead and remove the manual NUL-termination.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Tested-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250219224730.73093-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available).
Fixes: c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-9-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'rds_ib_dereg_odp_mr' has been unused since the original
commit 2eafa1746f17 ("net/rds: Handle ODP mr
registration/unregistration").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20240930134358.48647-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To better our unit tests we need code coverage to be part of the kernel.
This patch borrows heavily from how CONFIG_GCOV_PROFILE_FTRACE is
implemented
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f4f943c958a2 ("RDS: IB: ack more receive completions to improve performance")
removed rds_ib_recv_tasklet_fn() implementation but not the declaration.
And commit ec16227e1414 ("RDS/IB: Infiniband transport") declared but never implemented
other functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20240731063630.3592046-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cp might be null, calling cp->cp_conn would produce null dereference
[Simon Horman adds:]
Analysis:
* cp is a parameter of __rds_rdma_map and is not reassigned.
* The following call-sites pass a NULL cp argument to __rds_rdma_map()
- rds_get_mr()
- rds_get_mr_for_dest
* Prior to the code above, the following assumes that cp may be NULL
(which is indicative, but could itself be unnecessary)
trans_private = rs->rs_transport->get_mr(
sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL,
args->vec.addr, args->vec.bytes,
need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED);
* The code modified by this patch is guarded by IS_ERR(trans_private),
where trans_private is assigned as per the previous point in this analysis.
The only implementation of get_mr that I could locate is rds_ib_get_mr()
which can return an ERR_PTR if the conn (4th) argument is NULL.
* ret is set to PTR_ERR(trans_private).
rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL.
Thus ret may be -ENODEV in which case the code in question will execute.
Conclusion:
* cp may be NULL at the point where this patch adds a check;
this patch does seem to address a possible bug
Fixes: c055fc00c07b ("net/rds: fix WARNING in rds_conn_connect_if_down")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326153132.55580-1-mngyadam@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).
Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.
Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr().
Fixes: 584a8279a44a ("RDS: RDMA: return appropriate error on rdma map failures")
Reported-and-tested-by: syzbot+d4faee732755bba9838e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Functions rds_still_queued and rds_clear_recv_queue lock a given socket
in order to safely iterate over the incoming rds messages. However
calling rds_inc_put while under this lock creates a potential deadlock.
rds_inc_put may eventually call rds_message_purge, which will lock
m_rs_lock. This is the incorrect locking order since m_rs_lock is
meant to be locked before the socket. To fix this, we move the message
item to a local list or variable that wont need rs_recv_lock protection.
Then we can safely call rds_inc_put on any item stored locally after
rs_recv_lock is released.
Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Reported-by: syzbot+f9db6ff27b9bfdcfeca0@syzkaller.appspotmail.com
Reported-by: syzbot+dcd73ff9291e6d34b3ab@syzkaller.appspotmail.com
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://lore.kernel.org/r/20240209022854.200292-1-allison.henderson@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240124075801.471330-1-chentao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzcaller UBSAN crash occurs in rds_cmsg_recv(),
which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1),
but with array size of 4 (RDS_RX_MAX_TRACES).
Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from
trace.rx_trace_pos[i] in rds_recv_track_latency(),
with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the
off-by-one bounds check in rds_recv_track_latency() to prevent
a potential crash in rds_cmsg_recv().
Found by syzcaller:
=================================================================
UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39
index 4 is out of range for type 'u64 [4]'
CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348
rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585
rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1066
__sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246
__do_sys_recvfrom net/socket.c:2264 [inline]
__se_sys_recvfrom net/socket.c:2260 [inline]
__x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
==================================================================
Fixes: 3289025aedc0 ("RDS: add receive message trace used by application")
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
np->mcast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
