| Age | Commit message (Collapse) | Author |
|---|
|
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
|
|
People keep removing generated files from .gitignore files even when the
files stay around. Please don't do that: just because the file is no
longer being generated doesn't make it magically go away, and doesn't
make it suddenly be something that should now not be ignored any more.
Fixes: dd2c6ec24fca ("selftests/mm: remove virtual_address_range test")
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
|
|
Pull VFIO updates from Alex Williamson:
"A small cycle with the bulk in selftests and reintroducing poison
handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and
some dmabuf structure consolidation.
- Update outdated mdev comment referencing the renamed
mdev_type_add() function (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex
Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and the
compatibility mode supported by IOMMUFD (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure
and semantics (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used to
provide that reset (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up (Ioana Ciornei)"
* tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio:
vfio/fsl-mc: add myself as maintainer
vfio: selftests: only build tests on arm64 and x86_64
hisi_acc_vfio_pci: fix the queue parameter anomaly issue
hisi_acc_vfio_pci: resolve duplicate migration states
hisi_acc_vfio_pci: update status after RAS error
hisi_acc_vfio_pci: fix VF reset timeout issue
vfio/pci: Lock upstream bridge for vfio_pci_core_disable()
types: reuse common phys_vec type instead of DMABUF open‑coded variant
vfio/nvgrace-gpu: register device memory for poison handling
mm: add stubs for PFNMAP memory failure registration functions
vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU
vfio: selftests: Add vfio_dma_mapping_mmio_test
vfio: selftests: Align BAR mmaps for efficient IOMMU mapping
vfio: selftests: Centralize IOMMU mode name definitions
vfio/mdev: update outdated comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-verity:
- various optimizations and fixes related to forward error correction
- add a .dm-verity keyring
- dm-integrity: fix bugs with growing a device in bitmap mode
- dm-mpath:
- fix leaking fake timeout requests
- fix UAF bug caused by stale rq->bio
- fix minor bugs in device creation
- dm-core:
- fix a bug related to blkg association
- avoid unnecessary blk-crypto work on invalid keys
- dm-bufio:
- dm-bufio cleanup and optimization (reducing hash table lookups)
- various other minor fixes and cleanups
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
- extend Landlock to enforce restrictions on a whole process, similarly
to the seccomp's TSYNC flag
- refactor data structures to simplify code and improve performance
- add documentation to cover missing parts
* tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
mailmap: Add entry for Mickaël Salaün
landlock: Transpose the layer masks data structure
landlock: Add access_mask_subset() helper
selftests/landlock: Add filesystem access benchmark
landlock: Document audit blocker field format
landlock: Add errata documentation section
landlock: Add backwards compatibility for restrict flags
landlock: Refactor TCP socket type check
landlock: Minor reword of docs for TCP access rights
landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC
selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests
landlock: Multithreading support for landlock_restrict_self()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Move C example schedulers back from the external scx repo to
tools/sched_ext as the authoritative source. scx_userland and
scx_pair are returning while scx_sdt (BPF arena-based task data
management) is new. These schedulers will be dropped from the
external repo.
- Improve error reporting by adding scx_bpf_error() calls when DSQ
creation fails across all in-tree schedulers
- Avoid redundant irq_work_queue() calls in destroy_dsq() by only
queueing when llist_add() indicates an empty list
- Fix flaky init_enable_count selftest by properly synchronizing
pre-forked children using a pipe instead of sleep()
* tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Fix init_enable_count flakiness
tools/sched_ext: Fix data header access during free in scx_sdt
tools/sched_ext: Add error logging for dsq creation failures in remaining schedulers
tools/sched_ext: add arena based scheduler
tools/sched_ext: add scx_pair scheduler
tools/sched_ext: add scx_userland scheduler
sched_ext: Add error logging for dsq creation failures
sched_ext: Avoid multiple irq_work_queue() calls in destroy_dsq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement
- maintainership change for s390 vfio-pci
- small quality of life improvement for protected guests
|
|
KVM x86 APIC-ish changes for 6.20
- Fix a benign bug where KVM could use the wrong memslots (ignored SMM) when
creating a vCPU-specific mapping of guest memory.
- Clean up KVM's handling of marking mapped vCPU pages dirty.
- Drop a pile of *ancient* sanity checks hidden behind in KVM's unused
ASSERT() macro, most of which could be trivially triggered by the guest
and/or user, and all of which were useless.
- Fold "struct dest_map" into its sole user, "struct rtc_status", to make it
more obvious what the weird parameter is used for, and to allow burying the
RTC shenanigans behind CONFIG_KVM_IOAPIC=y.
- Bury all of ioapic.h and KVM_IRQCHIP_KERNEL behind CONFIG_KVM_IOAPIC=y.
- Add a regression test for recent APICv update fixes.
- Rework KVM's handling of VMCS updates while L2 is active to temporarily
switch to vmcs01 instead of deferring the update until the next nested
VM-Exit. The deferred updates approach directly contributed to several
bugs, was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans.
- Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv()
to consolidate the updates, and to co-locate SVI updates with the updates
for KVM's own cache of ISR information.
- Drop a dead function declaration.
|
|
KVM/riscv changes for 6.20
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Add riscv vm satp modes in KVM selftests
- Transparent huge page support for G-stage
- Adjust the number of available guest irq files based on
MMIO register sizes in DeviceTree or ACPI
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prior to this the receiver would sleep for the configured timeout,
then attempt to receive as many packets as possible. This would result
in a large burst of packets, and we don't necessarily need that many samples.
The tests now run faster.
Before
ok 12 toeplitz.test.rps_udp_ipv6
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
real 0m54.792s
user 0m12.486s
sys 0m10.887s
After
ok 12 toeplitz.test.rps_udp_ipv6
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
real 0m36.892s
user 0m4.203s
sys 0m8.314s
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20260207013018.551347-1-dimitri.daskalakis1@gmail.com
[pabeni@redhat.com: whitespaces fixes]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter updates for *net-next*:
1) Fix net-next-only use-after-free bug in nf_tables rbtree set:
Expired elements cannot be released right away after unlink anymore
because there is no guarantee that the binary-search blob is going to
be updated. Spotted by syzkaller.
2) Fix esoteric bug in nf_queue with udp fraglist gro, broken since
6.11. Patch 3 adds extends the nfqueue selftest for this.
4) Use dedicated slab for flowtable entries, currently the -512 cache
is used, which is wasteful. From Qingfang Deng.
5) Recent net-next update extended existing test for ip6ip6 tunnels, add
the required /config entry. Test still passed by accident because the
previous tests network setup gets re-used, so also update the test so
it will fail in case the ip6ip6 tunnel interface cannot be added.
6) Fix 'nft get element mytable myset { 1.2.3.4 }' on big endian
platforms, this was broken since code was added in v5.1.
7) Fix nf_tables counter reset support on 32bit platforms, where counter
reset may cause huge values to appear due to wraparound.
Broken since reset feature was added in v6.11. From Anders Grahn.
8-11) update nf_tables rbtree set type to detect partial
operlaps. This will eventually speed up nftables userspace: at this
time userspace does a netlink dump of the set content which slows down
incremental updates on interval sets. From Pablo Neira Ayuso.
* tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_rbtree: validate open interval overlap
netfilter: nft_set_rbtree: validate element belonging to interval
netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets
netfilter: nft_set_rbtree: fix bogus EEXIST with NLM_F_CREATE with null interval
netfilter: nft_counter: fix reset of counters on 32bit archs
netfilter: nft_set_hash: fix get operation on big endian
selftests: netfilter: add IPV6_TUNNEL to config
netfilter: flowtable: dedicated slab for flow entry
selftests: netfilter: nft_queue.sh: add udp fraglist gro test case
netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation
netfilter: nft_set_rbtree: don't gc elements on insert
====================
Link: https://patch.msgid.link/20260206153048.17570-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Dave Hansen:
"This is entirely composed of a set of long overdue VDSO cleanups. They
makes the VDSO build much more logical and zap quite a bit of old
cruft.
It also results in a coveted net-code-removal diffstat"
* tag 'x86_entry_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/vdso: Add vdso2c to .gitignore
x86/entry/vdso32: Omit '.cfi_offset eflags' for LLVM < 16
MAINTAINERS: Adjust vdso file entry in INTEL SGX
x86/entry/vdso/selftest: Update location of vgetrandom-chacha.S
x86/entry/vdso: Fix filtering of vdso compiler flags
x86/entry/vdso: Update the object paths for "make vdso_install"
x86/entry/vdso32: When using int $0x80, use it directly
x86/cpufeature: Replace X86_FEATURE_SYSENTER32 with X86_FEATURE_SYSFAST32
x86/vdso: Abstract out vdso system call internals
x86/entry/vdso: Include GNU_PROPERTY and GNU_STACK PHDRs
x86/entry/vdso32: Remove open-coded DWARF in sigreturn.S
x86/entry/vdso32: Remove SYSCALL_ENTER_KERNEL macro in sigreturn.S
x86/entry/vdso32: Don't rely on int80_landing_pad for adjusting ip
x86/entry/vdso: Refactor the vdso build
x86/entry/vdso: Move vdso2c to arch/x86/tools
x86/entry/vdso: Rename vdso_image_* to vdso*_image
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual set of cleanups and simplifications all over the tree
* tag 'x86_cleanups_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/segment: Use MOVL when reading segment registers
selftests/x86: Clean up sysret_rip coding style
x86/mm: Hide mm_free_global_asid() definition under CONFIG_BROADCAST_TLB_FLUSH
x86/crash: Use set_memory_p() instead of __set_memory_prot()
x86/CPU/AMD: Simplify the spectral chicken fix
x86/platform/olpc: Replace strcpy() with strscpy() in xo15_sci_add()
x86/split_lock: Remove dead string when split_lock_detect=fatal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Mostly small cleanups and various scattered annotations and flex array
warning fixes that we reviewed by unlanded in other trees. Introduces
new annotation for expanding counted_by to pointer members, now that
compiler behavior between GCC and Clang has been normalized.
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R.
Silva)
- Avoid leftover tempfiles for interrupted compile-time FORTIFY tests
(Nicolas Schier)
- Remove non-existant CONFIG_UBSAN_REPORT_FULL from docs (Stefan
Wiehler)
- fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
(David Laight)
- Add __counted_by_ptr attribute, tests, and first user (Bill
Wendling, Kees Cook)
- Update MAINTAINERS file to make hardening section not include
pstore"
* tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: pstore: Remove L: entry
nfp: tls: Avoid -Wflex-array-member-not-at-end warnings
carl9170: Avoid -Wflex-array-member-not-at-end warning
coredump: Use __counted_by_ptr for struct core_name::corename
lkdtm/bugs: Add __counted_by_ptr() test PTR_BOUNDS
compiler_types.h: Attributes: Add __counted_by_ptr macro
fortify: Cleanup temp file also on non-successful exit
fortify: Rename temporary file to match ignore pattern
fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
ecryptfs: Annotate struct ecryptfs_message with __counted_by
fs/xattr: Annotate struct simple_xattr with __counted_by
crypto: af_alg - Annotate struct af_alg_iv with __counted_by
Kconfig.ubsan: Remove CONFIG_UBSAN_REPORT_FULL from documentation
drm/nouveau: fifo: Avoid -Wflex-array-member-not-at-end warning
|
|
fs_bench benchmarks the performance of Landlock's path walk
by exercising it in a scenario that amplifies Landlock's overhead:
* Create a large number of nested directories
* Enforce a Landlock policy in which a rule is associated with each of
these subdirectories
* Benchmark openat() applied to the deepest directory,
forcing Landlock to walk the entire path.
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260206151154.97915-3-gnoack3000@gmail.com
[mic: Fix missing mode with O_CREAT, improve text consistency, sort
includes]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Run the packet loss and reordering tests also for both HSR versions. Now
they can be removed from the hsr_ping tests completely. The timeout needs
to be increased because there are 15 link fault test cases now, with each
of them taking 5-6sec for the test and at most 5sec for the HSR node tables
to get merged and we also want some room to make the test runs stable.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/eb6f667d3804ce63d86f0ee3fbc0e0ac9e1a209a.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests where one link has different rates of packet loss or reorders
packets. PRP should still be able to recover from these link faults and
show no packet loss. However, it is acceptable to receive some level of
duplicate packets. This matches the current specification (IEC
62439-3:2021) of the duplicate discard algorithm that requires it to be
"designed such that it never rejects a legitimate frame, while occasional
acceptance of a duplicate can be tolerated." The rate of acceptable
duplicates in this test is intentionally high (10%) to make the test
stable, the values I observed in the worst test cases (20% loss) are around
5% duplicates.
The duplicates occur because of the 10ms ping interval in the test. As
blocks expire after 400ms based on the timestamp of the first received
sequence number in the block, every approx. 40th will lead to a new, clean
block being used where the sequence number hasn't been seen before. As this
occurs on both nodes in the test (for requests and replies), we observe
around 20 duplicate frames.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/7b36506d3a80e53786fe56526cf6046c74dfeee1.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test case that can support different types of faulty links for all
protocol versions (HSRv0, HSRv1, PRPv1). It starts with a baseline with
fully functional links. The first faulty case is one link being cut during
the ping. This test uses a different function for ping that sends more
packets in shorter intervals to stress the duplicate detection algorithms a
bit more and allow for future tests with other link faults (packet loss,
reordering, etc.).
As the link fault tests now cover the cut link for HSR and PRP, it can be
removed from the hsr_ping test. Note that the removed cut link test did not
really test the fault because do_ping_long takes about 1sec while the link
is only cut after a 3sec sleep.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/dad52276e2c349ecb96168bef7e3001bf7becc81.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously the hsr_ping test only checked that all nodes in a VLAN are
reachable (using do_ping). Update the test to also check that there is no
packet loss and no duplicate packets by running the same tests for VLANs as
without VLANs (including using do_ping_long). This also adds tests for IPv6
over VLAN. To unify the test code, the topology without VLANs now uses IP
addresses from dead:beef:0::/64 to align with the 100.64.0.0/24 range for
IPv4. Error messages are updated across the board to make it easier to find
what actually failed.
Also update the VLAN test to only run in VLAN 2, as there is no need to
check if ping really works with VLAN IDs 2, 3, 4, and 5. This lowers the
number of long ping tests on VLANs to keep the overall test runtime in
bounds.
It's still necessary to bump the test timeout a bit, though: a ping long
tests takes 1sec, do_ping_tests performs 12 of them, do_link_problem_tests
6, and the VLAN tests again 12. With some buffer for setup and waiting and
for two protocol versions, 90sec timeout seems reasonable.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/e3ded0e2547b5f720524b62fabeb96debc579697.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a selftest for PRP that performs a basic ping test on IPv4 and IPv6,
over the plain PRP interface and a VLAN interface, similar to the existing
ping test for HSR. The test first checks reachability of the other node,
then checks for no loss and no duplicates.
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/4a342189e842d7308d037da72af566729ee75834.1770299429.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- All time-related functionality uses 64-bit timestamps for
y2038 compatibility
- fread() and fskeek() support
- ptrace() support
- Addition of libc-test to the regular kselftests
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260206-for-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
tools/nolibc: Add a simple test for writing to a FILE and reading it back
tools/nolibc: Add fseek() to stdio.h
tools/nolibc: Add fread() to stdio.h
selftests/nolibc: also test libc-test through regular selftest framework
selftests/nolibc: scope custom flags to the nolibc-test target
selftests/nolibc: try to read from stdin in readv_zero test
selftests/nolibc: always build sparc32 tests with -mcpu=v8
tools/nolibc: align sys_vfork() with sys_fork()
selftests/nolibc: drop NOLIBC_SYSROOT=0 logic
selftests/nolibc: add static assertions around time types handling
tools/nolibc: add __nolibc_static_assert()
tools/nolibc: add compiler version detection macros
tools/nolibc: remove time conversions
selftests/nolibc: test compatibility of nolibc and kernel time types
tools/nolibc: always use 64-bit time types
tools/nolibc: use custom structs timespec and timeval
tools/nolibc/select: avoid libgcc 64-bit multiplications
tools/nolibc/gettimeofday: avoid libgcc 64-bit divisions
tools/nolibc: prefer explicit 64-bit time-related system calls
tools/nolibc/time: drop invocation of gettimeofday system call
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for "slow" (long-term trend) workload type hints to
the Intel int340x thermal driver and selftests (and enable it for
Panther Lake), add support for MT8196 along with DT bindings and for
MT7987 to the Mediatek LVTS thermal driver, add support for RZ/T2H and
RZ/N2H along with DT bindings to the Renesas rzg3e thermal driver, add
support for the Panther Lake, Wildcat Lake and Nova Lake processors to
the intel_tcc_cooling driver, fix bugs, make some cosmetic changes
including code cleanups and library function substitutions, and update
documentation.
Specifics:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake platform
(Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle
THERMAL_TEMP_INVALID that can be passed to it via sysfs as expected
(Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
- Fix CFLAGS and LDFLAGS in the pkg-config libthermal template
(Romain Gantois)
- Support multiple temp to raw conversion functions in the Mediatek
LVTS thermal driver and add MT8196 and MT6991 support to it (Laura
Nao)
- Add Mediatek LVTS driver support for MT7987 (Frank Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro on BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas SoCs
where it is not available and add support for RZ/T2H and RZ/N2H to
the rzg3e thermal driver (Cosmin Tanislav)
- Document RZ/V2N TSU in the r9a09g047-tsu DT bindings (Ovidiu
Panait)
- Fix all kernel-doc warnings in the internal thermal core header
file (Randy Dunlap)
- Fix a device node reference leak in thermal_of_cm_lookup() (Felix
Gu)
- Replace some old-style library function calls with ones that are
currently recommended in several places in the thermal core and
debugfs code (Sumeet Pawnikar, Thorsten Blum)
* tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal/of: Fix reference leak in thermal_of_cm_lookup()
thermal: core: thermal_core.h: fix all kernel-doc warnings
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- statmount: accept fd as a parameter
Extend struct mnt_id_req with a file descriptor field and a new
STATMOUNT_BY_FD flag. When set, statmount() returns mount information
for the mount the fd resides on — including detached mounts
(unmounted via umount2(MNT_DETACH)).
For detached mounts the STATMOUNT_MNT_POINT and STATMOUNT_MNT_NS_ID
mask bits are cleared since neither is meaningful. The capability
check is skipped for STATMOUNT_BY_FD since holding an fd already
implies prior access to the mount and equivalent information is
available through fstatfs() and /proc/pid/mountinfo without
privilege. Includes comprehensive selftests covering both attached
and detached mount cases.
- fs: Remove internal old mount API code (1 patch)
Now that every in-tree filesystem has been converted to the new
mount API, remove all the legacy shim code in fs_context.c that
handled unconverted filesystems. This deletes ~280 lines including
legacy_init_fs_context(), the legacy_fs_context struct, and
associated wrappers. The mount(2) syscall path for userspace remains
untouched. Documentation references to the legacy callbacks are
cleaned up.
- mount: add OPEN_TREE_NAMESPACE to open_tree()
Container runtimes currently use CLONE_NEWNS to copy the caller's
entire mount namespace — only to then pivot_root() and recursively
unmount everything they just copied. With large mount tables and
thousands of parallel container launches this creates significant
contention on the namespace semaphore.
OPEN_TREE_NAMESPACE copies only the specified mount tree (like
OPEN_TREE_CLONE) but returns a mount namespace fd instead of a
detached mount fd. The new namespace contains the copied tree mounted
on top of a clone of the real rootfs.
This functions as a combined unshare(CLONE_NEWNS) + pivot_root() in a
single syscall. Works with user namespaces: an unshare(CLONE_NEWUSER)
followed by OPEN_TREE_NAMESPACE creates a mount namespace owned by
the new user namespace. Mount namespace file mounts are excluded from
the copy to prevent cycles. Includes ~1000 lines of selftests"
* tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/open_tree: add OPEN_TREE_NAMESPACE tests
mount: add OPEN_TREE_NAMESPACE
fs: Remove internal old mount API code
selftests: statmount: tests for STATMOUNT_BY_FD
statmount: accept fd as a parameter
statmount: permission check should return EPERM
|
|
The my_syscall*() macros are internal implementation details of nolibc.
Now that nolibc has a normal prctl() function, use that.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260117-nolibc-mysyscall-riscv-v1-1-0ae1ae3513e9@weissschuh.net
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test to v_ptrace test suite to verify that ptrace accepts the
valid input combinations of vector csr registers. Use kselftest
fixture variants to create multiple inputs for the test.
The test simulates a debug scenario with three breakpoints:
0. init: let the tracee set up its initial vector configuration
1. 1st bp: modify the tracee's vector csr registers from the debugger
- resume the tracee to execute a block without vector instructions
2. 2nd bp: read back the tracees's vector csr registers from the debugger
- compare with values set by the debugger
- resume the tracee to execute a block with vector instructions
3. 3rd bp: read back the tracess's vector csr registers again
- compare with values set by the debugger
The last check helps to confirm that ptrace validation check for vector
csr registers input values works properly and maintains an accurate view
of the tracee's vector context in debugger.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-10-geomatsi@gmail.com
[pjw@kernel.org: cleaned up a checkpatch issue]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test to v_ptrace test suite to verify that ptrace rejects the
invalid input combinations of vector csr registers. Use kselftest
fixture variants to create multiple invalid inputs for the test.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-9-geomatsi@gmail.com
[pjw@kernel.org: cleaned up some checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test to v_ptrace test suite to verify that vector csr registers
are clobbered on syscalls.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-8-geomatsi@gmail.com
[pjw@kernel.org: cleaned up a checkpatch issue]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test case that attaches to a traced process immediately after its
first executed vector instructions to verify the initial vector context.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-7-geomatsi@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add a test case to check ptrace behavior in the case when vector
extension is supported by the system, but vector context is not
yet enabled for the traced process.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-6-geomatsi@gmail.com
[pjw@kernel.org: dropped duplicate sys/wait.h include]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
KVM SVM changes for 6.20
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
- Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS
relies on an upcoming, publicly announced change in the APM to reduce the
set of conditions where hardware (i.e. KVM) *must* flush the RAP.
- Ignore nSVM intercepts for instructions that are not supported according to
L1's virtual CPU model.
- Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
for EPT Misconfig.
- Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
and allow userspace to restore nested state with GIF=0.
- Treat exit_code as an unsigned 64-bit value through all of KVM.
- Add support for fetching SNP certificates from userspace.
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
or VMSAVE on behalf of L2.
- Misc fixes and cleanups.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
- RCU Tasks Trace:
Re-implement RCU tasks trace in term of SRCU-fast, not only more than
500 lines of code are saved because of the reimplementation, a new
set of API, rcu_read_{,un}lock_tasks_trace(), becomes possible as
well. Compared to the previous rcu_read_{,un}lock_trace(), the new
API avoid the task_struct accesses thanks to the SRCU-fast semantics.
As a result, the old rcu_read{,un}lock_trace() API is now deprecated.
- RCU Torture Test:
- Multiple improvements on kvm-series.sh (parallel run and
progress showing metrics)
- Add context checks to rcu_torture_timer()
- Make config2csv.sh properly handle comments in .boot files
- Include commit discription in testid.txt
- Miscellaneous RCU changes:
- Reduce synchronize_rcu() latency by reporting GP kthread's
CPU QS early
- Use suitable gfp_flags for the init_srcu_struct_nodes()
- Fix rcu_read_unlock() deadloop due to softirq
- Correctly compute probability to invoke ->exp_current()
in rcutorture
- Make expedited RCU CPU stall warnings detect stall-end races
- RCU nocb:
- Remove unnecessary WakeOvfIsDeferred wake path and callback
overload handling
- Extract nocb_defer_wakeup_cancel() helper
* tag 'rcu.release.v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (25 commits)
rcu/nocb: Extract nocb_defer_wakeup_cancel() helper
rcu/nocb: Remove dead callback overload handling
rcu/nocb: Remove unnecessary WakeOvfIsDeferred wake path
rcu: Reduce synchronize_rcu() latency by reporting GP kthread's CPU QS early
srcu: Use suitable gfp_flags for the init_srcu_struct_nodes()
rcu: Fix rcu_read_unlock() deadloop due to softirq
rcutorture: Correctly compute probability to invoke ->exp_current()
rcu: Make expedited RCU CPU stall warnings detect stall-end races
rcutorture: Add --kill-previous option to terminate previous kvm.sh runs
rcutorture: Prevent concurrent kvm.sh runs on same source tree
torture: Include commit discription in testid.txt
torture: Make config2csv.sh properly handle comments in .boot files
torture: Make kvm-series.sh give run numbers and totals
torture: Make kvm-series.sh give build numbers and totals
torture: Parallelize kvm-series.sh guest-OS execution
rcutorture: Add context checks to rcu_torture_timer()
rcutorture: Test rcu_tasks_trace_expedite_current()
srcu: Create an rcu_tasks_trace_expedite_current() function
checkpatch: Deprecate rcu_read_{,un}lock_trace()
rcu: Update Requirements.rst for RCU Tasks Trace
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"resctrl test:
- fix division by zero error on Hygon
- fix non-contiguous CBM check for Hygon
- define CPU vendor IDs as bits to match usage
- add CPU vendor detection for Hygon
misc:
- coredeump test: use __builtin_trap() instead of a null pointer
- anon_inode: replace null pointers with empty arrays
- kublk: include message in _Static_assert for C11 compatibility
- run_kselftest.sh: add `--skip` argument option
- pidfd: fix typo in comment"
* tag 'linux_kselftest-next-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd: fix typo in comment
selftests/run_kselftest.sh: Add `--skip` argument option
selftests/resctrl: Fix non-contiguous CBM check for Hygon
selftests/resctrl: Add CPU vendor detection for Hygon
selftests/resctrl: Define CPU vendor IDs as bits to match usage
selftests/resctrl: Fix a division by zero error on Hygon
kselftest/kublk: include message in _Static_assert for C11 compatibility
kselftest/anon_inode: replace null pointers with empty arrays
kselftest/coredump: use __builtin_trap() instead of null pointer
|
|
KVM selftests changes for 6.20
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking.
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
and extend x86's infrastructure to support EPT and NPT (for L2 guests).
- Extend several nested VMX tests to also cover nested SVM.
- Add a selftest for nested VMLOAD/VMSAVE.
- Rework the nested dirty log test, originally added as a regression test for
PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
and to hopefully make the test easier to understand and maintain.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit:
- add __rust_helper to helpers
- fix up const mismatch in many assert functions
- fix up const mismatch in test_list_sort
- protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
- respect KBUILD_OUTPUT env variable by default
- add bash completion
kunit tool:
- add test for nested test result reporting
- do not overwrite test status based on subtest counts
- add 32-bit big endian ARM configuration to qemu_configs
- rename test_data_path() to _test_data_path()
- do not rely on implicit working directory change"
* tag 'linux_kselftest-kunit-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add bash completion
kunit: tool: test: Don't rely on implicit working directory change
kunit: tool: test: Rename test_data_path() to _test_data_path()
kunit: qemu_configs: Add 32-bit big endian ARM configuration
kunit: tool: Don't overwrite test status based on subtest counts
kunit: tool: Add test for nested test result reporting
kunit: respect KBUILD_OUTPUT env variable by default
kunit: Protect KUNIT_BINARY_STR_ASSERTION against ERR_PTR values
test_list_sort: fix up const mismatch
kunit: fix up const mis-match in many assert functions
rust: kunit: add __rust_helper to helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 7.0
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception.
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process.
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers.
- More pKVM fixes for features that are not supposed to be exposed to
guests.
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor.
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding.
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest.
- Preliminary work for guest GICv5 support.
- A bunch of debugfs fixes, removing pointless custom iterators stored
in guest data structures.
- A small set of FPSIMD cleanups.
- Selftest fixes addressing the incorrect alignment of page
allocation.
- Other assorted low-impact fixes and spelling fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.20
1. Add more CPUCFG mask bits.
2. Improve feature detection.
3. Add FPU/LBT delay load support.
4. Set default return value in KVM IO bus ops.
5. Add paravirt preempt feature support.
6. Add KVM steal time test case for tools/selftests.
|
