ports: Make new ports/ sub-directory and move all ports there.

This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.

1 files changed, 0 insertions, 106 deletions

diff --git a/esp8266/uart.h b/esp8266/uart.h
deleted file mode 100644
index 684689a0e..000000000
--- a/esp8266/uart.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef MICROPY_INCLUDED_ESP8266_UART_H
-#define MICROPY_INCLUDED_ESP8266_UART_H
-
-#include <eagle_soc.h>
-
-#define UART0 (0)
-#define UART1 (1)
-
-typedef enum {
-    UART_FIVE_BITS = 0x0,
-    UART_SIX_BITS = 0x1,
-    UART_SEVEN_BITS = 0x2,
-    UART_EIGHT_BITS = 0x3
-} UartBitsNum4Char;
-
-typedef enum {
-    UART_ONE_STOP_BIT             = 0x1,
-    UART_ONE_HALF_STOP_BIT        = 0x2,
-    UART_TWO_STOP_BIT             = 0x3
-} UartStopBitsNum;
-
-typedef enum {
-    UART_NONE_BITS  = 0,
-    UART_ODD_BITS   = BIT0,
-    UART_EVEN_BITS  = 0
-} UartParityMode;
-
-typedef enum {
-    UART_STICK_PARITY_DIS   = 0,
-    UART_STICK_PARITY_EN    = BIT1
-} UartExistParity;
-
-typedef enum {
-    UART_BIT_RATE_9600     = 9600,
-    UART_BIT_RATE_19200   = 19200,
-    UART_BIT_RATE_38400   = 38400,
-    UART_BIT_RATE_57600   = 57600,
-    UART_BIT_RATE_74880   = 74880,
-    UART_BIT_RATE_115200 = 115200,
-    UART_BIT_RATE_230400 = 230400,
-    UART_BIT_RATE_256000 = 256000,
-    UART_BIT_RATE_460800 = 460800,
-    UART_BIT_RATE_921600 = 921600
-} UartBautRate;
-
-typedef enum {
-    UART_NONE_CTRL,
-    UART_HARDWARE_CTRL,
-    UART_XON_XOFF_CTRL
-} UartFlowCtrl;
-
-typedef enum {
-    UART_EMPTY,
-    UART_UNDER_WRITE,
-    UART_WRITE_OVER
-} RcvMsgBuffState;
-
-typedef struct {
-    uint32     RcvBuffSize;
-    uint8     *pRcvMsgBuff;
-    uint8     *pWritePos;
-    uint8     *pReadPos;
-    uint8      TrigLvl; //JLU: may need to pad
-    RcvMsgBuffState  BuffState;
-} RcvMsgBuff;
-
-typedef struct {
-    uint32   TrxBuffSize;
-    uint8   *pTrxBuff;
-} TrxMsgBuff;
-
-typedef enum {
-    UART_BAUD_RATE_DET,
-    UART_WAIT_SYNC_FRM,
-    UART_SRCH_MSG_HEAD,
-    UART_RCV_MSG_BODY,
-    UART_RCV_ESC_CHAR,
-} RcvMsgState;
-
-typedef struct {
-    UartBautRate      baut_rate;
-    UartBitsNum4Char  data_bits;
-    UartExistParity   exist_parity;
-    UartParityMode    parity;    // chip size in byte
-    UartStopBitsNum   stop_bits;
-    UartFlowCtrl      flow_ctrl;
-    RcvMsgBuff        rcv_buff;
-    TrxMsgBuff        trx_buff;
-    RcvMsgState       rcv_state;
-    int               received;
-    int               buff_uart_no;  //indicate which uart use tx/rx buffer
-} UartDevice;
-
-void uart_init(UartBautRate uart0_br, UartBautRate uart1_br);
-int uart0_rx(void);
-bool uart_rx_wait(uint32_t timeout_us);
-int uart_rx_char(void);
-void uart_tx_one_char(uint8 uart, uint8 TxChar);
-void uart_flush(uint8 uart);
-void uart_os_config(int uart);
-void uart_setup(uint8 uart);
-// check status of rx/tx
-int uart_rx_any(uint8 uart);
-int uart_tx_any_room(uint8 uart);
-
-#endif // MICROPY_INCLUDED_ESP8266_UART_H