stmhal: Update STM32Cube F4 HAL driver to V1.3.0.

This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).

1 files changed, 8 insertions, 8 deletions

diff --git a/stmhal/hal/inc/stm32f4xx_hal_adc_ex.h b/stmhal/hal/inc/stm32f4xx_hal_adc_ex.h
index 785ef0e87..3559847dd 100644
--- a/stmhal/hal/inc/stm32f4xx_hal_adc_ex.h
+++ b/stmhal/hal/inc/stm32f4xx_hal_adc_ex.h
@@ -2,8 +2,8 @@
   ******************************************************************************

   * @file    stm32f4xx_hal_adc.h

   * @author  MCD Application Team

-  * @version V1.0.0

-  * @date    18-February-2014

+  * @version V1.1.0

+  * @date    19-June-2014

   * @brief   Header file of ADC HAL module.

   ******************************************************************************

   * @attention

@@ -61,8 +61,8 @@
   */ 

 typedef struct 

 {

-  uint32_t InjectedChannel;                /*!< Configure the ADC injected channel

-                                                This parameter can be a value of @ref ADC_channels. */ 

+  uint32_t InjectedChannel;                /*!< Configure the ADC injected channel.

+                                                This parameter can be a value of @ref ADC_channels */ 

   uint32_t InjectedRank;                   /*!< The rank in the injected group sequencer

                                                 This parameter must be a number between Min_Data = 1 and Max_Data = 4. */ 

   uint32_t InjectedSamplingTime;           /*!< The sample time value to be set for the selected channel.

@@ -77,9 +77,9 @@ typedef struct
   uint32_t InjectedDiscontinuousConvMode;  /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels.

                                                 This parameter can be set to ENABLE or DISABLE. */

   uint32_t ExternalTrigInjecConvEdge;      /*!< Select the external trigger edge and enable the trigger of an injected channels. 

-                                                This parameter can be a value of @ref ADC_External_trigger_Source_Injected. */

+                                                This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */

   uint32_t ExternalTrigInjecConv;          /*!< Select the external event used to trigger the start of conversion of a injected channels.

-                                                This parameter can be a value of @ref ADC_External_trigger_Source_Injected */

+                                                This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */

 }ADC_InjectionConfTypeDef;

 

 /** 

@@ -88,9 +88,9 @@ typedef struct
 typedef struct

 {

   uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode. 

-                                   This parameter can be a value of @ref ADC_Common_mode */

+                                   This parameter can be a value of @ref ADCEx_Common_mode */

   uint32_t DMAAccessMode;     /*!< Configures the Direct memory access mode for multi ADC mode.

-                                   This parameter can be a value of @ref ADC_Direct_memory_access_mode_for_multi_mode */

+                                   This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */

   uint32_t TwoSamplingDelay;  /*!< Configures the Delay between 2 sampling phases.

                                    This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */

 }ADC_MultiModeTypeDef;