diff options
Diffstat (limited to 'stm/lib/usbd_core.c')
| -rw-r--r-- | stm/lib/usbd_core.c | 506 |
1 files changed, 0 insertions, 506 deletions
diff --git a/stm/lib/usbd_core.c b/stm/lib/usbd_core.c deleted file mode 100644 index fa647eb0f..000000000 --- a/stm/lib/usbd_core.c +++ /dev/null @@ -1,506 +0,0 @@ -/**
- ******************************************************************************
- * @file usbd_core.c
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-March-2012
- * @brief This file provides all the USBD core functions.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "usbd_core.h"
-#include "usbd_req.h"
-#include "usbd_ioreq.h"
-#include "usb_dcd_int.h"
-#include "usb_bsp.h"
-
-/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
-* @{
-*/
-
-
-/** @defgroup USBD_CORE
-* @brief usbd core module
-* @{
-*/
-
-/** @defgroup USBD_CORE_Private_TypesDefinitions
-* @{
-*/
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Defines
-* @{
-*/
-
-/**
-* @}
-*/
-
-
-/** @defgroup USBD_CORE_Private_Macros
-* @{
-*/
-/**
-* @}
-*/
-
-
-
-
-/** @defgroup USBD_CORE_Private_FunctionPrototypes
-* @{
-*/
-static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
-static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum);
-static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev);
-#ifdef VBUS_SENSING_ENABLED
-static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev);
-#endif
-static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev);
-static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev) ;
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Variables
-* @{
-*/
-
-__IO USB_OTG_DCTL_TypeDef SET_TEST_MODE;
-
-USBD_DCD_INT_cb_TypeDef USBD_DCD_INT_cb =
-{
- USBD_DataOutStage,
- USBD_DataInStage,
- USBD_SetupStage,
- USBD_SOF,
- USBD_Reset,
- USBD_Suspend,
- USBD_Resume,
- USBD_IsoINIncomplete,
- USBD_IsoOUTIncomplete,
-#ifdef VBUS_SENSING_ENABLED
-USBD_DevConnected,
-USBD_DevDisconnected,
-#endif
-};
-
-USBD_DCD_INT_cb_TypeDef *USBD_DCD_INT_fops = &USBD_DCD_INT_cb;
-/**
-* @}
-*/
-
-/** @defgroup USBD_CORE_Private_Functions
-* @{
-*/
-
-/**
-* @brief USBD_Init
-* Initailizes the device stack and load the class driver
-* @param pdev: device instance
-* @param core_address: USB OTG core ID
-* @param class_cb: Class callback structure address
-* @param usr_cb: User callback structure address
-* @retval None
-*/
-void USBD_Init(USB_OTG_CORE_HANDLE *pdev,
- USB_OTG_CORE_ID_TypeDef coreID,
- USBD_DEVICE *pDevice,
- USBD_Class_cb_TypeDef *class_cb,
- USBD_Usr_cb_TypeDef *usr_cb)
-{
- /* Hardware Init */
- USB_OTG_BSP_Init(pdev);
-
- USBD_DeInit(pdev);
-
- /*Register class and user callbacks */
- pdev->dev.class_cb = class_cb;
- pdev->dev.usr_cb = usr_cb;
- pdev->dev.usr_device = pDevice;
-
- /* set USB OTG core params */
- DCD_Init(pdev , coreID);
-
- /* Upon Init call usr callback */
- pdev->dev.usr_cb->Init();
-
- /* Enable Interrupts */
- USB_OTG_BSP_EnableInterrupt(pdev);
-}
-
-/**
-* @brief USBD_DeInit
-* Re-Initialize th device library
-* @param pdev: device instance
-* @retval status: status
-*/
-USBD_Status USBD_DeInit(USB_OTG_CORE_HANDLE *pdev)
-{
- /* Software Init */
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_SetupStage
-* Handle the setup stage
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_SetupStage(USB_OTG_CORE_HANDLE *pdev)
-{
- USB_SETUP_REQ req;
-
- USBD_ParseSetupRequest(pdev , &req);
-
- switch (req.bmRequest & 0x1F)
- {
- case USB_REQ_RECIPIENT_DEVICE:
- USBD_StdDevReq (pdev, &req);
- break;
-
- case USB_REQ_RECIPIENT_INTERFACE:
- USBD_StdItfReq(pdev, &req);
- break;
-
- case USB_REQ_RECIPIENT_ENDPOINT:
- USBD_StdEPReq(pdev, &req);
- break;
-
- default:
- DCD_EP_Stall(pdev , req.bmRequest & 0x80);
- break;
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataOutStage
-* Handle data out stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-static uint8_t USBD_DataOutStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
-{
- USB_OTG_EP *ep;
-
- if(epnum == 0)
- {
- ep = &pdev->dev.out_ep[0];
- if ( pdev->dev.device_state == USB_OTG_EP0_DATA_OUT)
- {
- if(ep->rem_data_len > ep->maxpacket)
- {
- ep->rem_data_len -= ep->maxpacket;
-
- if(pdev->cfg.dma_enable == 1)
- {
- /* in slave mode this, is handled by the RxSTSQLvl ISR */
- ep->xfer_buff += ep->maxpacket;
- }
- USBD_CtlContinueRx (pdev,
- ep->xfer_buff,
- MIN(ep->rem_data_len ,ep->maxpacket));
- }
- else
- {
- if((pdev->dev.class_cb->EP0_RxReady != NULL)&&
- (pdev->dev.device_status == USB_OTG_CONFIGURED))
- {
- pdev->dev.class_cb->EP0_RxReady(pdev);
- }
- USBD_CtlSendStatus(pdev);
- }
- }
- }
- else if((pdev->dev.class_cb->DataOut != NULL)&&
- (pdev->dev.device_status == USB_OTG_CONFIGURED))
- {
- pdev->dev.class_cb->DataOut(pdev, epnum);
- }
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DataInStage
-* Handle data in stage
-* @param pdev: device instance
-* @param epnum: endpoint index
-* @retval status
-*/
-static uint8_t USBD_DataInStage(USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
-{
- USB_OTG_EP *ep;
-
- if(epnum == 0)
- {
- ep = &pdev->dev.in_ep[0];
- if ( pdev->dev.device_state == USB_OTG_EP0_DATA_IN)
- {
- if(ep->rem_data_len > ep->maxpacket)
- {
- ep->rem_data_len -= ep->maxpacket;
- if(pdev->cfg.dma_enable == 1)
- {
- /* in slave mode this, is handled by the TxFifoEmpty ISR */
- ep->xfer_buff += ep->maxpacket;
- }
- USBD_CtlContinueSendData (pdev,
- ep->xfer_buff,
- ep->rem_data_len);
- }
- else
- { /* last packet is MPS multiple, so send ZLP packet */
- if((ep->total_data_len % ep->maxpacket == 0) &&
- (ep->total_data_len >= ep->maxpacket) &&
- (ep->total_data_len < ep->ctl_data_len ))
- {
-
- USBD_CtlContinueSendData(pdev , NULL, 0);
- ep->ctl_data_len = 0;
- }
- else
- {
- if((pdev->dev.class_cb->EP0_TxSent != NULL)&&
- (pdev->dev.device_status == USB_OTG_CONFIGURED))
- {
- pdev->dev.class_cb->EP0_TxSent(pdev);
- }
- USBD_CtlReceiveStatus(pdev);
- }
- }
- }
- if (pdev->dev.test_mode == 1)
- {
- USBD_RunTestMode(pdev);
- pdev->dev.test_mode = 0;
- }
- }
- else if((pdev->dev.class_cb->DataIn != NULL)&&
- (pdev->dev.device_status == USB_OTG_CONFIGURED))
- {
- pdev->dev.class_cb->DataIn(pdev, epnum);
- }
- return USBD_OK;
-}
-
-
-
-
-/**
-* @brief USBD_RunTestMode
-* Launch test mode process
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_RunTestMode (USB_OTG_CORE_HANDLE *pdev)
-{
- USB_OTG_WRITE_REG32(&pdev->regs.DREGS->DCTL, SET_TEST_MODE.d32);
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Reset
-* Handle Reset event
-* @param pdev: device instance
-* @retval status
-*/
-
-static uint8_t USBD_Reset(USB_OTG_CORE_HANDLE *pdev)
-{
- /* Open EP0 OUT */
- DCD_EP_Open(pdev,
- 0x00,
- USB_OTG_MAX_EP0_SIZE,
- EP_TYPE_CTRL);
-
- /* Open EP0 IN */
- DCD_EP_Open(pdev,
- 0x80,
- USB_OTG_MAX_EP0_SIZE,
- EP_TYPE_CTRL);
-
- /* Upon Reset call usr call back */
- pdev->dev.device_status = USB_OTG_DEFAULT;
- pdev->dev.usr_cb->DeviceReset(pdev->cfg.speed);
-
- return USBD_OK;
-}
-
-/**
-* @brief USBD_Resume
-* Handle Resume event
-* @param pdev: device instance
-* @retval status
-*/
-
-static uint8_t USBD_Resume(USB_OTG_CORE_HANDLE *pdev)
-{
- /* Upon Resume call usr call back */
- pdev->dev.usr_cb->DeviceResumed();
- pdev->dev.device_status = pdev->dev.device_old_status;
- pdev->dev.device_status = USB_OTG_CONFIGURED;
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_Suspend
-* Handle Suspend event
-* @param pdev: device instance
-* @retval status
-*/
-
-static uint8_t USBD_Suspend(USB_OTG_CORE_HANDLE *pdev)
-{
- pdev->dev.device_old_status = pdev->dev.device_status;
- pdev->dev.device_status = USB_OTG_SUSPENDED;
- /* Upon Resume call usr call back */
- pdev->dev.usr_cb->DeviceSuspended();
- return USBD_OK;
-}
-
-
-/**
-* @brief USBD_SOF
-* Handle SOF event
-* @param pdev: device instance
-* @retval status
-*/
-
-static uint8_t USBD_SOF(USB_OTG_CORE_HANDLE *pdev)
-{
- if(pdev->dev.class_cb->SOF)
- {
- pdev->dev.class_cb->SOF(pdev);
- }
- return USBD_OK;
-}
-/**
-* @brief USBD_SetCfg
-* Configure device and start the interface
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status
-*/
-
-USBD_Status USBD_SetCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx)
-{
- pdev->dev.class_cb->Init(pdev, cfgidx);
-
- /* Upon set config call usr call back */
- pdev->dev.usr_cb->DeviceConfigured();
- return USBD_OK;
-}
-
-/**
-* @brief USBD_ClrCfg
-* Clear current configuration
-* @param pdev: device instance
-* @param cfgidx: configuration index
-* @retval status: USBD_Status
-*/
-USBD_Status USBD_ClrCfg(USB_OTG_CORE_HANDLE *pdev, uint8_t cfgidx)
-{
- pdev->dev.class_cb->DeInit(pdev, cfgidx);
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoINIncomplete
-* Handle iso in incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_IsoINIncomplete(USB_OTG_CORE_HANDLE *pdev)
-{
- pdev->dev.class_cb->IsoINIncomplete(pdev);
- return USBD_OK;
-}
-
-/**
-* @brief USBD_IsoOUTIncomplete
-* Handle iso out incomplete event
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_IsoOUTIncomplete(USB_OTG_CORE_HANDLE *pdev)
-{
- pdev->dev.class_cb->IsoOUTIncomplete(pdev);
- return USBD_OK;
-}
-
-#ifdef VBUS_SENSING_ENABLED
-/**
-* @brief USBD_DevConnected
-* Handle device connection event
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_DevConnected(USB_OTG_CORE_HANDLE *pdev)
-{
- pdev->dev.usr_cb->DeviceConnected();
- pdev->dev.connection_status = 1;
- return USBD_OK;
-}
-
-/**
-* @brief USBD_DevDisconnected
-* Handle device disconnection event
-* @param pdev: device instance
-* @retval status
-*/
-static uint8_t USBD_DevDisconnected(USB_OTG_CORE_HANDLE *pdev)
-{
- pdev->dev.usr_cb->DeviceDisconnected();
- pdev->dev.class_cb->DeInit(pdev, 0);
- pdev->dev.connection_status = 0;
- return USBD_OK;
-}
-#endif
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
|