Update with release notes for v6.5.1.

Change references from v6.5 to v6.5.1 in the installation instructions.

2 files changed, 62 insertions, 22 deletions

diff --git a/HISTORY b/HISTORY
index 179b2cccb4e..f4b128a68b1 100644
--- a/HISTORY
+++ b/HISTORY
@@ -5,6 +5,9 @@ by The PostgreSQL Development Team
 PostgreSQL is Copyright © 1996-9 by the Postgres Global Development Group.
 
 Table of Contents
+          Release 6.5.1                                         
+             Migration to v6.5.1                                
+             Detailed Change List                               
           Release 6.5                                           
              Migration to v6.5                                  
                  Multi-Version Concurrency Control              
@@ -58,6 +61,43 @@ Table of Contents
              Detailed Change List                               
           Postgres95 Beta 0.01                                  
 
+Release 6.5.1
+
+        This is basically a cleanup release for 6.5.  We have fixed a
+       variety of problems reported by 6.5 users.
+
+Migration to v6.5.1
+
+       A dump/restore is not required for those running 6.5.
+
+Detailed Change List
+
+       Fix for datetime constant problem on some platforms(Thomas)
+       Add NT README file
+       Portability fixes for linux_ppc, Irix, linux_alpha, OpenBSD, alpha
+       Remove QUERY_LIMIT, use SELECT...LIMIT
+       Fix for EXPLAIN on inheritance(Tom)
+       Patch to allow vacuum on multi-segment tables(Hiroshi)
+       R-Tree optimizer selectivity fix(Tom)
+       ACL file descriptor leak fix(Atsushi Ogawa)
+       New expresssion subtree code(Tom)
+       Avoid disk writes for read-only transactions(Vadim)
+       Fix for removal of temp tables if last transaction was aborted(Bruce)
+       Fix to prevent too large tuple from being created(Bruce)
+       plpgsql fixes
+       Allow port numbers 32k - 64k(Bruce)
+       Add ^ precedence(Bruce)
+       Rename sort files called pg_temp to pg_sorttemp(Bruce)
+       Fix for microseconds in time values(Tom)
+       Tutorial source cleanup
+       New linux_m68k port
+       Fix for sorting of NULL's in some cases(Tom)
+       Shared library dependencies fixed (Tom)
+       Fixed glitches affecting GROUP BY in subselects(Tom)
+       Fix some compiler warnings (Tomoaki Nishiyama)
+       Add Win1250 (Czech) support (Pavel Behal)
+
+
 Release 6.5
 
         This release marks a major step in the development team's mastery 
@@ -167,8 +207,6 @@ Migration to v6.5
 
 Detailed Change List
 
-        
-
        Bug Fixes
        ---------
        Fix text<->float8 and text<->float4 conversion functions(Thomas)
@@ -350,9 +388,6 @@ Detailed Change List
        leak(Tom)
        New install commands for plpgsql(Jan)
             
-
-        
-
 Release 6.4.2
 
        The 6.4.1 release was improperly packaged. This also has one 
diff --git a/INSTALL b/INSTALL
index 5ae66b8853a..8815bafd78d 100644
--- a/INSTALL
+++ b/INSTALL
@@ -27,6 +27,9 @@ Table of Contents
              Installation                                 
              Operation                                    
        5. Release Notes                                   
+          Release 6.5.1                                   
+             Migration to v6.5.1                          
+             Detailed Change List                         
           Release 6.5                                     
              Migration to v6.5                            
                  Multi-Version Concurrency Control        
@@ -55,7 +58,7 @@ Chapter 1. Introduction
 
 Chapter 2. Ports
 
-        This manual describes version 6.5 of Postgres. The 
+        This manual describes version 6.5.1 of Postgres. The 
        Postgres developer community has compiled and tested 
        Postgres on a number of platforms. Check the web site 
        (http://www.postgresql.org/docs/admin/ports.htm) for 
@@ -147,7 +150,7 @@ Currently Supported Platforms
 
         
         Platforms listed for v6.3.x and v6.4.x should also 
-       work with v6.5, but we did not receive explicit 
+       work with v6.5.1, but we did not receive explicit 
        confirmation of such at the time this list was 
        compiled. 
 
@@ -183,7 +186,7 @@ Unsupported Platforms
 Chapter 3. Installation
 
         Complete installation instructions for Postgres 
-       v6.5. 
+       v6.5.1. 
 
         Before installing Postgres, you may wish to visit 
        www.postgresql.org (http://www.postgresql.org) for up 
@@ -282,10 +285,8 @@ Installation Procedure
          the remaining steps in the installation will 
          happen in this account.
        4. Ftp file 
-         ftp://ftp.postgresql.org/pub/postgresql-v6.5.tar.-
-         gz 
-         (ftp://ftp.postgresql.org/pub/postgresql-v6.5.tar-
-         .gz) from the Internet. Store it in your home 
+         ftp://ftp.postgresql.org/pub/postgresql-v6.5.1.tar.gz 
+         from the Internet. Store it in your home 
          directory.
        5. Some platforms use flex. If your system uses flex 
          then make sure you have a good version. To check, 
@@ -330,8 +331,12 @@ Installation Procedure
          /usr/include/FlexLexer.h and will add a link 
          /usr/bin/flex++ which points to flex.
        6. If you are not upgrading an existing system then 
-         skip to step 9. If you are upgrading an existing 
-         system then back up your database. For alpha- and 
+         skip to step 9. If you are upgrading from 6.5, you
+         do not need to dump/reload or initdb. Simply
+         compile the source code, stop the postmaster, do a
+         "make install", and restart the postmaster.
+         If you are upgrading from 6.4.* or earlier,
+         back up your database.  For alpha- and 
          beta-level releases, the database format is liable 
          to change, often every few weeks, with no notice 
          besides a quick comment in the HACKERS mailing 
@@ -351,7 +356,7 @@ Installation Procedure
          pull the most recent version of pg_dumpall from 
          the new distribution: 
          $ cd
-         $ gunzip -c postgresql-v6.5.tar.gz \
+         $ gunzip -c postgresql-v6.5.1.tar.gz \
              | tar xvf - src/bin/pg_dump/pg_dumpall
          $ chmod a+x src/bin/pg_dump/pg_dumpall
          $ src/bin/pg_dump/pg_dumpall > db.out
@@ -445,7 +450,7 @@ Installation Procedure
          $ exit
        10.     Unzip and untar the new source file. Type 
          $ cd /usr/src/pgsql
-         $ gunzip -c ~/postgresql-v6.5.tar.gz | tar xvf -
+         $ gunzip -c ~/postgresql-v6.5.1.tar.gz | tar xvf -
        11.     Configure the source code for your system. It 
          is this step at which you can specify your actual 
          installation path for the build process (see the 
@@ -685,7 +690,7 @@ Installation Procedure
             a. Start the postmaster daemon running in the 
               background by typing 
               $ cd
-              $ postmaster -i
+              $ nohup postmaster -i > pgserver.log 2>&1 &
             b. Create a database by typing 
               $ createdb
             c. Connect to the new database: 
@@ -867,7 +872,7 @@ Installation Procedure
          # Also delete old database directory tree if it is 
          not in
          #  /usr/local/pgsql_6_5/data
-         $ rm ~/postgresql-v6.5.tar.gz
+         $ rm ~/postgresql-v6.5.1.tar.gz
        27.     You will probably want to print out the 
          documentation. If you have a Postscript printer, 
          or have your machine already set up to accept 
@@ -894,10 +899,10 @@ Installation Procedure
          send a mail message to pgsql-ports@postgresql.org 
          (mailto:pgsql-ports@postgresql.org) telling us the 
          following: 
-         o  The version of Postgres (v6.5, 6.4.2, beta 
-           981014, etc.).
-         o  Your operating system (i.e. RedHat v5.1 Linux 
-           v2.0.34).
+         o  The version of Postgres (v6.5.1, 6.5, beta 
+           990318, etc.).
+         o  Your operating system (i.e. RedHat v5.2 Linux 
+           v2.0.36).
          o  Your hardware (SPARC, i486, etc.).
          o  Did you compile, install and run the regression 
            tests cleanly? If not, what source code did you