Remove tabs after spaces in C comments

This was not changed in HEAD, but will be done later as part of a
pgindent run.  Future pgindent runs will also do this.

Report by Tom Lane

Backpatch through all supported branches, but not HEAD

6 files changed, 14 insertions, 14 deletions

diff --git a/src/backend/access/common/heaptuple.c b/src/backend/access/common/heaptuple.c
index 75d599aab9a..ca060fabbd6 100644
--- a/src/backend/access/common/heaptuple.c
+++ b/src/backend/access/common/heaptuple.c
@@ -21,7 +21,7 @@
  * tuptoaster.c.
  *
  * This change will break any code that assumes it needn't detoast values
- * that have been put into a tuple but never sent to disk.	Hopefully there
+ * that have been put into a tuple but never sent to disk.  Hopefully there
  * are few such places.
  *
  * Varlenas still have alignment 'i' (or 'd') in pg_type/pg_attribute, since
@@ -388,7 +388,7 @@ nocachegetattr(HeapTuple tuple,
 
 		/*
 		 * Otherwise, check for non-fixed-length attrs up to and including
-		 * target.	If there aren't any, it's safe to cheaply initialize the
+		 * target.  If there aren't any, it's safe to cheaply initialize the
 		 * cached offsets for these attrs.
 		 */
 		if (HeapTupleHasVarWidth(tuple))
@@ -455,7 +455,7 @@ nocachegetattr(HeapTuple tuple,
 		 *
 		 * Note - This loop is a little tricky.  For each non-null attribute,
 		 * we have to first account for alignment padding before the attr,
-		 * then advance over the attr based on its length.	Nulls have no
+		 * then advance over the attr based on its length.  Nulls have no
 		 * storage and no alignment padding either.  We can use/set
 		 * attcacheoff until we reach either a null or a var-width attribute.
 		 */
@@ -550,7 +550,7 @@ heap_getsysattr(HeapTuple tup, int attnum, TupleDesc tupleDesc, bool *isnull)
 
 			/*
 			 * cmin and cmax are now both aliases for the same field, which
-			 * can in fact also be a combo command id.	XXX perhaps we should
+			 * can in fact also be a combo command id.  XXX perhaps we should
 			 * return the "real" cmin or cmax if possible, that is if we are
 			 * inside the originating transaction?
 			 */
@@ -710,7 +710,7 @@ heap_form_tuple(TupleDesc tupleDescriptor,
 	len += data_len;
 
 	/*
-	 * Allocate and zero the space needed.	Note that the tuple body and
+	 * Allocate and zero the space needed.  Note that the tuple body and
 	 * HeapTupleData management structure are allocated in one chunk.
 	 */
 	tuple = (HeapTuple) palloc0(HEAPTUPLESIZE + len);
diff --git a/src/backend/access/common/indextuple.c b/src/backend/access/common/indextuple.c
index 2b518c53464..65c77cf41ec 100644
--- a/src/backend/access/common/indextuple.c
+++ b/src/backend/access/common/indextuple.c
@@ -71,7 +71,7 @@ index_form_tuple(TupleDesc tupleDescriptor,
 
 		/*
 		 * If value is stored EXTERNAL, must fetch it so we are not depending
-		 * on outside storage.	This should be improved someday.
+		 * on outside storage.  This should be improved someday.
 		 */
 		if (VARATT_IS_EXTERNAL(DatumGetPointer(values[i])))
 		{
@@ -281,7 +281,7 @@ nocache_index_getattr(IndexTuple tup,
 
 		/*
 		 * Otherwise, check for non-fixed-length attrs up to and including
-		 * target.	If there aren't any, it's safe to cheaply initialize the
+		 * target.  If there aren't any, it's safe to cheaply initialize the
 		 * cached offsets for these attrs.
 		 */
 		if (IndexTupleHasVarwidths(tup))
@@ -348,7 +348,7 @@ nocache_index_getattr(IndexTuple tup,
 		 *
 		 * Note - This loop is a little tricky.  For each non-null attribute,
 		 * we have to first account for alignment padding before the attr,
-		 * then advance over the attr based on its length.	Nulls have no
+		 * then advance over the attr based on its length.  Nulls have no
 		 * storage and no alignment padding either.  We can use/set
 		 * attcacheoff until we reach either a null or a var-width attribute.
 		 */
diff --git a/src/backend/access/common/printtup.c b/src/backend/access/common/printtup.c
index afce6d5edfa..b959d460303 100644
--- a/src/backend/access/common/printtup.c
+++ b/src/backend/access/common/printtup.c
@@ -166,7 +166,7 @@ printtup_startup(DestReceiver *self, int operation, TupleDesc typeinfo)
  * or some similar function; it does not contain a full set of fields.
  * The targetlist will be NIL when executing a utility function that does
  * not have a plan.  If the targetlist isn't NIL then it is a Query node's
- * targetlist; it is up to us to ignore resjunk columns in it.	The formats[]
+ * targetlist; it is up to us to ignore resjunk columns in it.  The formats[]
  * array pointer might be NULL (if we are doing Describe on a prepared stmt);
  * send zeroes for the format codes in that case.
  */
diff --git a/src/backend/access/common/reloptions.c b/src/backend/access/common/reloptions.c
index 465742556f5..e4d0380e1cd 100644
--- a/src/backend/access/common/reloptions.c
+++ b/src/backend/access/common/reloptions.c
@@ -466,7 +466,7 @@ add_real_reloption(bits32 kinds, char *name, char *desc, double default_val,
  *		Add a new string reloption
  *
  * "validator" is an optional function pointer that can be used to test the
- * validity of the values.	It must elog(ERROR) when the argument string is
+ * validity of the values.  It must elog(ERROR) when the argument string is
  * not acceptable for the variable.  Note that the default value must pass
  * the validation.
  */
@@ -533,7 +533,7 @@ add_string_reloption(bits32 kinds, char *name, char *desc, char *default_val,
  * Note that this is not responsible for determining whether the options
  * are valid, but it does check that namespaces for all the options given are
  * listed in validnsps.  The NULL namespace is always valid and needs not be
- * explicitely listed.	Passing a NULL pointer means that only the NULL
+ * explicitely listed.  Passing a NULL pointer means that only the NULL
  * namespace is valid.
  *
  * Both oldOptions and the result are text arrays (or NULL for "default"),
@@ -809,7 +809,7 @@ extractRelOptions(HeapTuple tuple, TupleDesc tupdesc, Oid amoptions)
  * is returned.
  *
  * Note: values of type int, bool and real are allocated as part of the
- * returned array.	Values of type string are allocated separately and must
+ * returned array.  Values of type string are allocated separately and must
  * be freed by the caller.
  */
 relopt_value *
diff --git a/src/backend/access/common/tupconvert.c b/src/backend/access/common/tupconvert.c
index 34e5f114404..94a7f87b377 100644
--- a/src/backend/access/common/tupconvert.c
+++ b/src/backend/access/common/tupconvert.c
@@ -5,7 +5,7 @@
  *
  * These functions provide conversion between rowtypes that are logically
  * equivalent but might have columns in a different order or different sets
- * of dropped columns.	There is some overlap of functionality with the
+ * of dropped columns.  There is some overlap of functionality with the
  * executor's "junkfilter" routines, but these functions work on bare
  * HeapTuples rather than TupleTableSlots.
  *
diff --git a/src/backend/access/common/tupdesc.c b/src/backend/access/common/tupdesc.c
index 014fc3babfd..5ed8e7c00ad 100644
--- a/src/backend/access/common/tupdesc.c
+++ b/src/backend/access/common/tupdesc.c
@@ -533,7 +533,7 @@ TupleDescInitEntryCollation(TupleDesc desc,
  * Given a relation schema (list of ColumnDef nodes), build a TupleDesc.
  *
  * Note: the default assumption is no OIDs; caller may modify the returned
- * TupleDesc if it wants OIDs.	Also, tdtypeid will need to be filled in
+ * TupleDesc if it wants OIDs.  Also, tdtypeid will need to be filled in
  * later on.
  */
 TupleDesc