| Age | Commit message (Collapse) | Author |
|---|
|
We don't need it any more.
pg_controldata continues to report that date/time type storage is
"64-bit integers", but that's now a hard-wired behavior not something
it sees in the data. This avoids breaking pg_upgrade, and perhaps other
utilities that inspect pg_control this way. Ditto for pg_resetwal.
I chose to remove the "bigint_timestamps" output column of
pg_control_init(), though, as that function hasn't been around long
and probably doesn't have ossified users.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
|
|
Per discussion, the time has come to do this. The handwriting has been
on the wall at least since 9.0 that this would happen someday, whenever
it got to be too much of a burden to support the float-timestamp option.
The triggering factor now is the discovery that there are multiple bugs
in the code that attempts to implement use of integer timestamps in the
replication protocol even when the server is built for float timestamps.
The internal float timestamps leak into the protocol fields in places.
While we could fix the identified bugs, there's a very high risk of
introducing more. Trying to build a wall that would positively prevent
mixing integer and float timestamps is more complexity than we want to
undertake to maintain a long-deprecated option. The fact that these
bugs weren't found through testing also indicates a lack of interest
in float timestamps.
This commit disables configure's --disable-integer-datetimes switch
(it'll still accept --enable-integer-datetimes, though), removes direct
references to USE_INTEGER_DATETIMES, and removes discussion of float
timestamps from the user documentation. A considerable amount of code is
rendered dead by this, but removing that will occur as separate mop-up.
Discussion: https://postgr.es/m/26788.1487455319@sss.pgh.pa.us
|
|
Yugo Nagata
|
|
|
|
There is no specific reason for this right now, but keeping support for
old Python versions around indefinitely increases the maintenance
burden. The oldest supported Python version is now Python 2.4, which is
still shipped in RHEL/CentOS 5 by default.
In configure, add a check for the required Python version and give a
friendly error message for an old version, instead of relying on an
obscure build error later on.
|
|
Replace incorrect word "index" with "heap"
Takayuki Tsunakawa
|
|
These are only supported in to_char, not in the other direction, but the
documentation failed to mention that. Also, describe TZ/tz as printing the
time zone "abbreviation", not "name", because what they print is elsewhere
referred to that way. Per bug #14558.
|
|
Previously, if the parent was specified as WITH OIDS, each child
also had to be explicitly specified as WITH OIDS.
Amit Langote, per a report from Simon Riggs. Some additional
work on the documentation changes by me.
Discussion: http://postgr.es/m/CANP8+jJBpWocfKrbJcaf3iBt9E3U=WPE_NC8YE6rye+YJ1sYnQ@mail.gmail.com
|
|
From: Thom Brown <thom@linux.com>
|
|
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
|
|
This causes a warning with the old html-docs toolchain, though not with the
new. I had originally supposed that we needed both <indexterm> entries to
get both a primary index entry and a see-also link; but evidently not,
as pointed out by Fabien Coelho.
Discussion: https://postgr.es/m/alpine.DEB.2.20.1702161616060.5445@lancre
|
|
Make the typedefs for output plugins consistent with project style;
they were previously not even consistent with each other as to layout
or inclusion of parameter names. Make the documentation look the same,
and fix errors therein (missing and misdescribed parameters).
Back-patch because of the documentation bugs.
|
|
There's no such field as OutputPluginOptions.output_mode;
it's actually output_type. Noted by T. Katsumata.
Discussion: https://postgr.es/m/20170215072115.6101.29870@wrigleys.postgresql.org
|
|
Commit 906bfcad7 adjusted the syntax synopsis for UPDATE, but missed
the fact that the INSERT synopsis now contains a duplicate of that.
In passing, improve wording and markup about using a table alias to
dodge the conflict with use of "excluded" as a special table name.
|
|
In combination with 569174f1be92be93f5366212cc46960d28a5c5cd, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
|
|
When min_parallel_relation_size was added, the only supported type
of parallel scan was a parallel sequential scan, but there are
pending patches for parallel index scan, parallel index-only scan,
and parallel bitmap heap scan. Those patches introduce two new
types of complications: first, what's relevant is not really the
total size of the relation but the portion of it that we will scan;
and second, index pages and heap pages shouldn't necessarily be
treated in exactly the same way. Typically, the number of index
pages will be quite small, but that doesn't necessarily mean that
a parallel index scan can't pay off.
Therefore, we introduce min_parallel_table_scan_size, which works
out a degree of parallelism for scans based on the number of table
pages that will be scanned (and which is therefore equivalent to
min_parallel_relation_size for parallel sequential scans) and also
min_parallel_index_scan_size which can be used to work out a degree
of parallelism based on the number of index pages that will be
scanned.
Amit Kapila and Robert Haas
Discussion: http://postgr.es/m/CAA4eK1KowGSYYVpd2qPpaPPA5R90r++QwDFbrRECTE9H_HvpOg@mail.gmail.com
Discussion: http://postgr.es/m/CAA4eK1+TnM4pXQbvn7OXqam+k_HZqb0ROZUMxOiL6DWJYCyYow@mail.gmail.com
|
|
I didn't realize these would ever be visible to clients, but Michael
figured out that it can happen when using asynchronous interfaces
such as PQconnectPoll.
Michael Paquier
|
|
Reviewed-by: Magnus Hagander <magnus@hagander.net>
|
|
The core of the functionality was already implemented when
pg_import_system_collations was added. This just exposes it as an
option in the SQL command.
|
|
Ashutosh Bapat
|
|
This isn't exposed to the optimizer or the executor yet; we'll add
support for those things in a separate patch. But this puts the
basic mechanism in place: several processes can attach to a parallel
btree index scan, and each one will get a subset of the tuples that
would have been produced by a non-parallel scan. Each index page
becomes the responsibility of a single worker, which then returns
all of the TIDs on that page.
Rahila Syed, Amit Kapila, Robert Haas, reviewed and tested by
Anastasia Lubennikova, Tushar Ahuja, and Haribabu Kommi.
|
|
David Rowley, reviewed by Brad DeJong, Amit Kapila, and me.
Discussion: http://postgr.es/m/CAKJS1f81fob-M6RJyTVv3SCasxMuQpj37ReNOJ=tprhwd7hAVg@mail.gmail.com
|
|
Commit f82ec32ac30ae7e3ec7c84067192535b2ff8ec0e renamed the pg_xlog
directory to pg_wal. To make things consistent, we decided to eliminate
"xlog" from user-visible docs.
|
|
This module was intended to ease migrations of applications that used
the pre-8.3 version of text search to the in-core version introduced
in that release. However, since all pre-8.3 releases of the database
have been out of support for more than 5 years at this point, we
expect that few people are depending on it at this point. If some
people still need it, nothing prevents it from being maintained as a
separate extension, outside of core.
Discussion: http://postgr.es/m/CA+Tgmob5R8aDHiFRTQsSJbT1oreKg2FOSBrC=2f4tqEH3dOMAg@mail.gmail.com
|
|
|
|
This stores a data type, required to be an integer type, with the
sequence. The sequences min and max values default to the range
supported by the type, and they cannot be set to values exceeding that
range. The internal implementation of the sequence is not affected.
Change the serial types to create sequences of the appropriate type.
This makes sure that the min and max values of the sequence for a serial
column match the range of values supported by the table column. So the
sequence can no longer overflow the table column.
This also makes monitoring for sequence exhaustion/wraparound easier,
which currently requires various contortions to cross-reference the
sequences with the table columns they are used with.
This commit also effectively reverts the pg_sequence column reordering
in f3b421da5f4addc95812b9db05a24972b8fd9739, because the new seqtypid
column allows us to fill the hole in the struct and create a more
natural overall column ordering.
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
Add a section titled "Partitioned Tables" to describe what are
partitioned tables, partition, their similarities with inheritance.
The existing section on inheritance is retained for clarity.
Then add examples to the partitioning chapter that show syntax for
partitioned tables. In fact they implement the same partitioning
scheme that is currently shown using inheritance.
Amit Langote, with additional details and explanatory text by me
|
|
Amit Langote
|
|
Amit Langote, with corrections by me
|
|
initdb and pg_basebackup now have a --waldir option rather --xlogdir,
and pg_basebackup now has --wal-method rather than --xlog-method.
|
|
xlog-switch becomes wal-switch, and xlog-insert becomes wal-insert.
|
|
This means pg_receivexlog because pg_receivewal, pg_resetxlog
becomes pg_resetwal, and pg_xlogdump becomes pg_waldump.
|
|
Commit f82ec32ac30ae7e3ec7c84067192535b2ff8ec0e renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
|
|
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
|
|
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
|
|
Add link to description of libpq connection strings. Add link to
explanation of replication access control. This currently points to the
description of streaming replication access control, which is currently
the same as for logical replication, but that might be refined later.
Also remove plain-text passwords from the examples, to not encourage
that dubious practice.
based on suggestions from Simon Riggs
|
|
This avoids a very significant amount of buffer manager traffic and
contention when scanning hash indexes, because it's no longer
necessary to lock and pin the metapage for every scan. We do need
some way of figuring out when the cache is too stale to use any more,
so that when we lock the primary bucket page to which the cached
metapage points us, we can tell whether a split has occurred since we
cached the metapage data. To do that, we use the hash_prevblkno field
in the primary bucket page, which would otherwise always be set to
InvalidBuffer.
This patch contains code so that it will continue working (although
less efficiently) with hash indexes built before this change, but
perhaps we should consider bumping the hash version and ripping out
the compatibility code. That decision can be made later, though.
Mithun Cy, reviewed by Jesper Pedersen, Amit Kapila, and by me.
Before committing, I made a number of cosmetic changes to the last
posted version of the patch, adjusted _hash_getcachedmetap to be more
careful about order of operation, and made some necessary updates to
the pageinspect documentation and regression tests.
|
|
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
|
|
|
|
Document the privileges required for each of the sequence functions.
This was already in the GRANT reference page, but also add it to the
function description for easier reference.
|
|
Before, reading pg_sequences.last_value would fail unless the user had
appropriate sequence permissions, which would make the pg_sequences view
cumbersome to use. Instead, return null instead of the real value when
there are no permissions.
From: Michael Paquier <michael.paquier@gmail.com>
Reported-by: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
|
|
Add item for last-minute CREATE INDEX CONCURRENTLY fix.
Repair a couple of misspellings of patch authors' names.
Back-branch updates will follow shortly, but I thought I'd
commit this separately just to make it more visible.
|
|
The example of using CREATE DATABASE with the ENCODING option did not
work anymore (except in special circumstances) and did not represent a
good general-purpose example, so write some new examples.
Reported-by: marc+pgsql@milestonerdl.com
|
|
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first.
|
|
Since pgstattuple v1.5 hasn't been released yet, no need for a new
extension version. The new function exposes statistics about hash
indexes similar to what other pgstatindex functions return for other
index types.
Ashutosh Sharma, reviewed by Kuntal Ghosh. Substantial further
revisions by me.
|
|
Modify FETCH_COUNT to always have a defined value, like other control
variables, mainly so it will always appear in "\set" output.
Add hooks to force HISTSIZE to be defined and require it to have an
integer value. (I don't see any point in allowing it to be set to
non-integral values.)
Add hooks to force IGNOREEOF to be defined and require it to have an
integer value. Unlike the other cases, here we're trying to be
bug-compatible with a rather bogus externally-defined behavior, so I think
we need to continue to allow "\set IGNOREEOF whatever". Fix it so that
the substitution hook silently replace non-numeric values with "10",
so that the stored value always reflects what we're really doing.
Add a dummy assign hook for HISTFILE, just so it's always in
variables.c's list. We can't require it to be defined always, because
that would break the interaction with the PSQL_HISTORY environment
variable, so there isn't any change in visible behavior here.
Remove tab-complete.c's private list of known variable names, since that's
really a maintenance nuisance. Given the preceding changes, there are no
control variables it won't show anyway. This does mean that if for some
reason you've unset one of the status variables (DBNAME, HOST, etc), that
variable would not appear in tab completion for \set. But I think that's
fine, for at least two reasons: we shouldn't be encouraging people to use
those variables as regular variables, and if someone does do so anyway,
why shouldn't it act just like a regular variable?
Remove ugly and no-longer-used-anywhere GetVariableNum(). In general,
future additions of integer-valued control variables should follow the
paradigm of adding an assign hook using ParseVariableNum(), so there's
no reason to expect we'd need this again later.
Discussion: https://postgr.es/m/17516.1485973973@sss.pgh.pa.us
|
|
It's not broken because the header file is included via other headers,
but for better style we should be more explicit.
Reported-by: mthrockmorton@hme.com
|
|
From: Marko Tiikkaja <marko@joh.to>
|
|
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Discussion: http://postgr.es/m/e2ac6c58-b93f-9dd9-f4e6-d6d30add7fdf@redhat.com
|
|
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
|
