| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise, after a deleted page gets even older, it becomes unrecyclable
again. B-tree has the same problem, and has had since time immemorial,
but let's at least fix this in GiST, where this is new.
Backpatch to v12, where GiST page deletion was introduced.
Reviewed-by: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/835A15A5-F1B4-4446-A711-BF48357EB602%40yandex-team.ru
|
|
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
|
|
This is numbered take 7, and addresses a set of issues with code
comments, variable names and unreferenced variables.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/dff75442-2468-f74f-568c-6006e141062f@gmail.com
|
|
I was careless passing a datum directly to DATE_NOT_FINITE without
calling DatumGetDateADT() first.
Backpatch-through: 9.4
|
|
The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
|
|
Formerly, lcons was about the same speed as lappend, but with the new
List implementation, that's not so; with a long List, data movement
imposes an O(N) cost on lcons and list_delete_first, but not lappend.
Hence, invent list_delete_last with semantics parallel to
list_delete_first (but O(1) cost), and change various places to use
lappend and list_delete_last where this can be done without much
violence to the code logic.
There are quite a few places that construct result lists using lcons not
lappend. Some have semantic rationales for that; I added comments about
it to a couple that didn't have them already. In many such places though,
I think the coding is that way only because back in the dark ages lcons
was faster than lappend. Hence, switch to lappend where this can be done
without causing semantic changes.
In ExecInitExprRec(), this results in aggregates and window functions that
are in the same plan node being executed in a different order than before.
Generally, the executions of such functions ought to be independent of
each other, so this shouldn't result in visibly different query results.
But if you push it, as one regression test case does, you can show that
the order is different. The new order seems saner; it's closer to
the order of the functions in the query text. And we never documented
or promised anything about this, anyway.
Also, in gistfinishsplit(), don't bother building a reverse-order list;
it's easy now to iterate backwards through the original list.
It'd be possible to go further towards removing uses of lcons and
list_delete_first, but it'd require more extensive logic changes,
and I'm not convinced it's worth it. Most of the remaining uses
deal with queues that probably never get long enough to be worth
sweating over. (Actually, I doubt that any of the changes in this
patch will have measurable performance effects either. But better
to have good examples than bad ones in the code base.)
Patch by me, thanks to David Rowley and Daniel Gustafsson for review.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
|
|
heap.c and relcache.c contained nearly identical copies of logic
to insert OIDs into an OID list while preserving the list's OID
ordering (and rejecting duplicates, in one case but not the other).
The comments argue that this is faster than qsort for small numbers
of OIDs, which is at best unproven, and seems even less likely to be
true now that lappend_cell_oid has to move data around. In any case
it's ugly and hard-to-follow code, and if we do have a lot of OIDs
to consider, it's O(N^2).
Hence, replace with simply lappend'ing OIDs to a List, then list_sort
the completed List, then remove adjacent duplicates if necessary.
This is demonstrably O(N log N) and it's much simpler for the
callers. It's possible that this would be somewhat inefficient
if there were a very large number of duplicates, but that seems
unlikely in the existing usage.
This adds list_deduplicate_oid and list_oid_cmp infrastructure
to list.c. I didn't bother with equivalent functionality for
integer or pointer Lists, but such could always be added later
if we find a use for it.
Discussion: https://postgr.es/m/26193.1563228600@sss.pgh.pa.us
|
|
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
|
|
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
|
This adds a built-in function to generate UUIDs.
PostgreSQL hasn't had a built-in function to generate a UUID yet,
relying on external modules such as uuid-ossp and pgcrypto to provide
one. Now that we have a strong random number generator built-in, we
can easily provide a version 4 (random) UUID generation function.
This patch takes the existing function gen_random_uuid() from pgcrypto
and makes it a built-in function. The pgcrypto implementation now
internally redirects to the built-in one.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/6a65610c-46fc-2323-6b78-e8086340a325@2ndquadrant.com
|
|
Some of <-> operators between geometric types have their commutators missed.
This commit adds them. The motivation is upcoming kNN support for some of those
operators.
Discussion: https://postgr.es/m/f71ba19d-d989-63b6-f04a-abf02ad9345d%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Tom Lane, Alexander Korotkov
|
|
Commit 3ca930fc3 modified get_actual_variable_range() to use a new
"SnapshotNonVacuumable" snapshot type for selecting tuples that it
would consider valid. However, because that snapshot type can accept
recently-dead tuples, this caused a bug when using a recently-created
index: we might accept a recently-dead tuple that is an early member
of a broken HOT chain and does not actually match the index entry.
Then, the data extracted from the heap tuple would not necessarily be
an endpoint value of the column; it could even be NULL, leading to
get_actual_variable_range() itself reporting "found unexpected null
value in index". Even without an error, this could lead to poor
plan choices due to an erroneous notion of the endpoint value.
We can improve matters by changing the code to use the index-only
scan technique (which didn't exist when get_actual_variable_range was
originally written). If any of the tuples in a HOT chain are live
enough to satisfy SnapshotNonVacuumable, we take the data from the
index entry, ignoring what is in the heap. This fixes the problem
without changing the live-vs-dead-tuple behavior from what was
intended by commit 3ca930fc3.
A side benefit is that for static tables we might not have to touch
the heap at all (when the extremal value is in an all-visible page).
In addition, we can save some overhead by not having to create a
complete ExecutorState, and we don't need to run FormIndexDatum,
avoiding more cycles as well as the possibility of failure for
indexes on expressions. (I'm not sure that this code would ever
be used to determine the extreme value of an expression, in the
current state of the planner; but it's definitely possible that
lower-order columns of the selected index could be expressions.
So one could construct perhaps-artificial examples in which the
old code unexpectedly failed due to trying to compute an
expression's value for a now-dead row.)
Per report from Manuel Rigger. Back-patch to v11 where commit
3ca930fc3 came in.
Discussion: https://postgr.es/m/CA+u7OA7W4NWEhCvftdV6_8bbm2vgypi5nuxfnSEJQqVKFSUoMg@mail.gmail.com
|
|
Syntax is OpenSSL-specific, so only use it for OpenSSL.
Discussion: https://postgr.es/m/8232E273-7B25-47F4-B0E7-3D4264106F82@yesql.se
Author: Daniel Gustafsson
Backpatch-through: head
|
|
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
|
|
Use
if (something() != 0)
error ...
instead of just
if (something)
error ...
The latter is not incorrect, but it's a bit confusing and not the
common style.
Discussion: https://www.postgresql.org/message-id/flat/5de61b6b-8be9-7771-0048-860328efe027%402ndquadrant.com
|
|
The code for conversions SQL_ASCII <-> MULE_INTERNAL and
SQL_ASCII <-> UTF8 was unreachable, because we long ago changed
the wrapper functions pg_do_encoding_conversion() et al so that
they have hard-wired behaviors for conversions involving SQL_ASCII.
(At least some of those fast paths date back to 2002, though it
looks like we may not have been totally consistent about this until
later.) Given the lack of complaints, nobody is dissatisfied with
this state of affairs. Hence, let's just remove the unreachable code.
Also, change CREATE CONVERSION so that it rejects attempts to
define such conversions. Since we consider that SQL_ASCII represents
lack of knowledge about the encoding in use, such a conversion would
be semantically dubious even if it were reachable.
Adjust a couple of regression test cases that had randomly decided
to rely on these conversion functions rather than any other ones.
Discussion: https://postgr.es/m/41163.1559156593@sss.pgh.pa.us
|
|
The Unix manual section that "man tcp" appears in varies, so let's
just leave it out of the command to run.
|
|
This is useful for monitoring, when it comes for example to calculations
of WAL retention with replication slots and delays with a set of
standbys.
Bump catalog version.
Author: Fabrízio de Royes Mello
Reviewed-by: Surafel Temesgen
Discussion: https://postgr.es/m/CAFcNs+oc8ZoHhowA4rR1GGCgG8QNgK_TOwPRVYQo5rYy8_PXzA@mail.gmail.com
|
|
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
|
|
pgperltidy and reformat-dat-files too, though the latter didn't
find anything to change.
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/af27d1b3-a128-9d62-46e0-88f424397f44@gmail.com
|
|
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190629210334.GA1244217@rfd.leadboat.com
|
|
Using PG_RETURN_LSN() from non-fmgr pg_lsn_in_internal() happened to
work on some platforms, but should just be a plain "return".
|
|
Instead of calling pg_lsn_in() in check_recovery_target_lsn and
timestamptz_in() in check_recovery_target_time, reorganize the
respective code so that we don't raise any errors in the check hooks.
The previous code tried to use PG_TRY/PG_CATCH to handle errors in a
way that is not safe, so now the code contains no ereport() calls and
can operate safely within the GUC error handling system.
Moreover, since the interpretation of the recovery_target_time string
may depend on the time zone, we cannot do the final processing of that
string until all the GUC processing is done. Instead,
check_recovery_target_time() now does some parsing for syntax
checking, but the actual conversion to a timestamptz value is done
later in the recovery code that uses it.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190611061115.njjwkagvxp4qujhp%40alap3.anarazel.de
|
|
The date/time values 'current', 'invalid', and 'undefined' were
removed a long time ago, but the code still contains explicit error
handling for the transition. To simplify the code and avoid having to
handle these values everywhere, just remove the recognition of these
tokens altogether now.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
This code is new in v12, and the defect probably was not user-visible.
|
|
SQL/JSON standard defines that jsonpath 'like_regex' predicate should support
the same set of flags as XQuery/XPath. It appears that implementation of 'q'
flag was missed. This commit fixes that.
Discussion: https://postgr.es/m/CAPpHfdtyfPsxLYiTjp5Ov8T5xGsB5t3CwE5%2B3PS%3DLLwA%2BxTJog%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov
|
|
The list of combining characters to ignore for calculating the display
width of a string (used for example by psql) was wildly outdated and
incorrect.
Discussion: https://www.postgresql.org/message-id/flat/bbb19114-af1e-513b-08a9-61272794bd5c%402ndquadrant.com
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0a5419ea-1452-a4e6-72ff-545b1a5a8076@gmail.com
|
|
Since extended statistic got introduced in PostgreSQL 10, there was a
single catalog pg_statistic_ext storing both the definitions and built
statistic. That's however problematic when a user is supposed to have
access only to the definitions, but not to user data.
Consider for example pg_dump on a database with RLS enabled - if the
pg_statistic_ext catalog respects RLS (which it should, if it contains
user data), pg_dump would not see any records and the result would not
define any extended statistics. That would be a surprising behavior.
Until now this was not a pressing issue, because the existing types of
extended statistic (functional dependencies and ndistinct coefficients)
do not include any user data directly. This changed with introduction
of MCV lists, which do include most common combinations of values.
The easiest way to fix this is to split the pg_statistic_ext catalog
into two - one for definitions, one for the built statistic values.
The new catalog is called pg_statistic_ext_data, and we're maintaining
a 1:1 relationship with the old catalog - either there are matching
records in both catalogs, or neither of them.
Bumped CATVERSION due to changing system catalog definitions.
Author: Dean Rasheed, with improvements by me
Reviewed-by: Dean Rasheed, John Naylor
Discussion: https://postgr.es/m/CAEZATCUhT9rt7Ui%3DVdx4N%3D%3DVV5XOK5dsXfnGgVOz_JhAicB%3DZA%40mail.gmail.com
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/dec6aae8-2d63-639f-4d50-20e229fb83e3@gmail.com
|
|
Given a query in which multiple JOIN nodes used the same alias
(which'd necessarily be in different sub-SELECTs), ruleutils.c
would assign the JOIN nodes distinct aliases for clarity ...
but then it forgot to print the modified aliases when dumping
the JOIN nodes themselves. This results in a dump/reload hazard
for views, because the emitted query is flat-out incorrect:
Vars will be printed with table names that have no referent.
This has been wrong for a long time, so back-patch to all supported
branches.
Philip Dubé
Discussion: https://postgr.es/m/CY4PR2101MB080246F2955FF58A6ED1FEAC98140@CY4PR2101MB0802.namprd21.prod.outlook.com
|
|
json_to_record(), when an output column is declared as type json or jsonb,
should emit the corresponding field of the input JSON object. But it got
this slightly wrong when the field is just a string literal: it failed to
escape the contents of the string. That typically resulted in syntax
errors if the string contained any double quotes or backslashes.
jsonb_to_record() handles such cases correctly, but I added corresponding
test cases for it too, to prevent future backsliding.
Improve the documentation, as it provided only a very hand-wavy
description of the conversion rules used by these functions.
Per bug report from Robert Vollmert. Back-patch to v10 where the
error was introduced (by commit cf35346e8).
Note that PG 9.4 - 9.6 also get this case wrong, but differently so:
they feed the de-escaped contents of the string literal to json[b]_in.
That behavior is less obviously wrong, so possibly it's being depended on
in the field, so I won't risk trying to make the older branches behave
like the newer ones.
Discussion: https://postgr.es/m/D6921B37-BD8E-4664-8D5F-DB3525765DCD@vllmrt.net
|
|
Vignesh found this bug in the check function for
default_table_access_method's check hook, but that was just copied
from older GUCs. Investigation by Michael and me then found the bug in
further places.
When not connected to a database (e.g. in a walsender connection), we
cannot perform (most) GUC checks that need database access. Even when
only shared tables are needed, unless they're
nailed (c.f. RelationCacheInitializePhase2()), they cannot be accessed
without pg_class etc. being present.
Fix by extending the existing IsTransactionState() checks to also
check for MyDatabaseOid.
Reported-By: Vignesh C, Michael Paquier, Andres Freund
Author: Vignesh C, Andres Freund
Discussion: https://postgr.es/m/CALDaNm1KXK9gbZfY-p_peRFm_XrBh1OwQO1Kk6Gig0c0fVZ2uw%40mail.gmail.com
Backpatch: 9.4-
|
|
|
|
Author: Andrea Gelmini
Reviewed-by: Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/20190528181718.GA39034@glet
|
|
Reported-by: Alexander Lakhin
Author: Alexander Lakhin
Reviewed-by: Amit Kapila and Tom Lane
Discussion: https://postgr.es/m/7208de98-add8-8537-91c0-f8b089e2928c@gmail.com
|
|
Some of the wrapper functions didn't match the callback names. Many of
them due to staying "consistent" with historic naming of the wrapped
functionality. We decided that for most cases it's more important to
be for tableam to be consistent going forward, than with the past.
The one exception is beginscan/endscan/... because it'd have looked
odd to have systable_beginscan/endscan/... with a different naming
scheme, and changing the systable_* APIs would have caused way too
much churn (including breaking a lot of external users).
Author: Ashwin Agrawal, with some small additions by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeiugyrXZfX7n0ORCa4L-m834dzmaE8eFdbNR6PMpetU4Ww@mail.gmail.com
|
|
Make all the perl code look nice, too (for some value of "nice").
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
|
|
Make jsonb_path_query_array() and jsonb_path_query_first() use
PG_FUNCTION_ARGS macro instead of its expansion.
|
|
Instead add a tableam callback to do so. To avoid adding per
validation overhead, pass a scan to tuple_tid_valid. In heap's case
we'd otherwise incurred a RelationGetNumberOfBlocks() call for each
tid - which'd have added noticable overhead to nodeTidscan.c.
Author: Andres Freund
Reviewed-By: Ashwin Agrawal
Discussion: https://postgr.es/m/20190515185447.gno2jtqxyktylyvs@alap3.anarazel.de
|
|
Discussion: https://postgr.es/m/20190515183005.GA26486@alvherre.pgsql
|
|
SQL's regular-expression substring() function is defined to have a
pattern argument that's separated into three subpatterns by escape-
double-quote markers; the function result is the part of the input
matching the second subpattern. The standard makes it clear that
if there is ambiguity about how to match the input to the subpatterns,
the first and third subpatterns should be taken to match the smallest
possible amount of text (i.e., they're "non greedy", in the terms of
our regex code). We were not doing it that way: the first subpattern
would eat the largest possible amount of text, causing the function
result to be shorter than what the spec requires.
Fix that by attaching explicit greediness quantifiers to the
subpatterns. (This depends on the regex fix in commit 8a29ed053;
before that, this didn't reliably change the regex engine's behavior.)
Also, by adding parentheses around each subpattern, we ensure that
"|" (OR) in the subpatterns behave sanely. Previously, "|" in the
first or third subpatterns didn't work.
This patch also makes the function throw error if you write more than
two escape-double-quote markers, and do something sane if you write
just one, and document that behavior. Previously, an odd number of
markers led to a confusing complaint about unbalanced parentheses,
while extra pairs of markers were just ignored. (Note that the spec
requires exactly two markers, but we've historically allowed there
to be none, and this patch preserves the old behavior for that case.)
In passing, adjust some substring() test cases that didn't really
prove what they said they were testing for: they used patterns
that didn't match the data string, so that the output would be
NULL whether or not the function was really strict.
Although this is certainly a bug fix, changing the behavior in back
branches seems undesirable: applications could perhaps be depending on
the old behavior, since it's not obviously wrong unless you read the
spec very closely. Hence, no back-patch.
Discussion: https://postgr.es/m/5bb27a41-350d-37bf-901e-9d26f5592dd0@charter.net
|
|
|
|
equalsJsonbScalarValue() uses a boolean as return type, however for one
code path -1 gets returned, which is confusing. The origin of the
confusion is visibly that this code got copy-pasted from
compareJsonbScalarValue() since it has been introduced in d1d50bf.
No backpatch, as this is only cosmetic.
Author: Rikard Falkeborn
Discussion: https://postgr.es/m/CADRDgG7mJnek6HNW13f+LF6V=6gag9PM+P7H5dnyWZAv49aBGg@mail.gmail.com
|
|
The function had been interpreting SQL_ASCII messages as UTF8, throwing
an error when they were invalid UTF8. The new behavior is consistent
with pg_do_encoding_conversion(). This affects LOG_DESTINATION_STDERR
and LOG_DESTINATION_EVENTLOG, which will send untranslated bytes to
write() and ReportEventA(). On buildfarm member bowerbird, enabling
log_connections caused an error whenever the role name was not valid
UTF8. Back-patch to 9.4 (all supported versions).
Discussion: https://postgr.es/m/20190512015615.GD1124997@rfd.leadboat.com
|
|
The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.
The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed. That's even sillier. With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.
With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID. Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)". But keep
IsCatalogRelation as a convenience function.
This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid. The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.
While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.
Also improve the comments in catalog.c.
There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId. I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId. But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.
Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
|
|
This commit contains multiple improvements to error reporting in jsonpath
including but not limited to getting rid of following things:
* definition of error messages in macros,
* errdetail() when valueable information could fit to errmsg(),
* word "singleton" which is not properly explained anywhere,
* line breaks in error messages.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/14890.1555523005%40sss.pgh.pa.us
Author: Alexander Korotkov
Reviewed-by: Tom Lane
|
