| Age | Commit message (Collapse) | Author |
|---|
|
The C99 and POSIX standards require strtod() to accept all these spellings
(case-insensitively): "inf", "+inf", "-inf", "infinity", "+infinity",
"-infinity". However, pre-C99 systems might accept only some or none of
these, and apparently Windows still doesn't accept "inf". To avoid
surprising cross-platform behavioral differences, manually check for each
of these spellings if strtod() fails. We were previously handling just
"infinity" and "-infinity" that way, but since C99 is most of the world
now, it seems likely that applications are expecting all these spellings
to work.
Per bug #8355 from Basil Peace. It turns out this fix won't actually
resolve his problem, because Python isn't being this careful; but that
doesn't mean we shouldn't be.
|
|
If a tuple is locked but not updated by a concurrent transaction,
HeapTupleSatisfiesDirty would return that transaction's Xid in xmax,
causing callers to wait on it, when it is not necessary (in fact, if the
other transaction had used a multixact instead of a plain Xid to mark
the tuple, HeapTupleSatisfiesDirty would have behave differently and
*not* returned the Xmax).
This bug was introduced in commit 3f7fbf85dc5b42, dated December 1998,
so it's almost 15 years old now. However, it's hard to see this
misbehave, because before we had NOWAIT the only consequence of this is
that transactions would wait for slightly more time than necessary; so
it's not surprising that this hasn't been reported yet.
Craig Ringer and Andres Freund
|
|
We'd find the same match twice if it was of zero length and not immediately
adjacent to the previous match. replace_text_regexp() got similar cases
right, so adjust this search logic to match that. Note that even though
the regexp_split_to_xxx() functions share this code, they did not display
equivalent misbehavior, because the second match would be considered
degenerate and ignored.
Jeevan Chalke, with some cosmetic changes by me.
|
|
In a boolean column that contains mostly nulls, ANALYZE might not find
enough non-null values to populate the most-common-values stats,
but it would still create a pg_statistic entry with stanullfrac set.
The logic in booltestsel() for this situation did the wrong thing for
"col IS NOT TRUE" and "col IS NOT FALSE" tests, forgetting that null
values would satisfy these tests (so that the true selectivity would
be close to one, not close to zero). Per bug #8274.
Fix by Andrew Gierth, some comment-smithing by me.
|
|
It's possible to drop a column from an input table of a JOIN clause in a
view, if that column is nowhere actually referenced in the view. But it
will still be there in the JOIN clause's joinaliasvars list. We used to
replace such entries with NULL Const nodes, which is handy for generation
of RowExpr expansion of a whole-row reference to the view. The trouble
with that is that it can't be distinguished from the situation after
subquery pull-up of a constant subquery output expression below the JOIN.
Instead, replace such joinaliasvars with null pointers (empty expression
trees), which can't be confused with pulled-up expressions. expandRTE()
still emits the old convention, though, for convenience of RowExpr
generation and to reduce the risk of breaking extension code.
In HEAD and 9.3, this patch also fixes a problem with some new code in
ruleutils.c that was failing to cope with implicitly-casted joinaliasvars
entries, as per recent report from Feike Steenbergen. That oversight was
because of an inadequate description of the data structure in parsenodes.h,
which I've now corrected. There were some pre-existing oversights of the
same ilk elsewhere, which I believe are now all fixed.
|
|
In tuplesort.c:inittapes(), we calculate tapeSpace by first figuring
out how many 'tapes' we can use (maxTapes) and then multiplying the
result by the tape buffer overhead for each. Unfortunately, when
we are on a system with an 8-byte long, we allow work_mem to be
larger than 2GB and that allows maxTapes to be large enough that the
32bit arithmetic can overflow when multiplied against the buffer
overhead.
When this overflow happens, we end up adding the overflow to the
amount of space available, causing the amount of memory allocated to
be larger than work_mem.
Note that to reach this point, you have to set work mem to at least
24GB and be sorting a set which is at least that size. Given that a
user who can set work_mem to 24GB could also set it even higher, if
they were looking to run the system out of memory, this isn't
considered a security issue.
This overflow risk was found by the Coverity scanner.
Back-patch to all supported branches, as this issue has existed
since before 8.4.
|
|
This case doesn't normally happen, because the planner usually clamps
all row estimates to at least one row; but I found that it can arise
when dealing with relations excluded by constraints. Without a defense,
estimate_num_groups() can return zero, which leads to divisions by zero
inside the planner as well as assertion failures in the executor.
An alternative fix would be to change set_dummy_rel_pathlist() to make
the size estimate for a dummy relation 1 row instead of 0, but that seemed
pretty ugly; and probably someday we'll want to drop the convention that
the minimum rowcount estimate is 1 row.
Back-patch to 8.4, as the problem can be demonstrated that far back.
|
|
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
|
|
formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY'). Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I". To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters. Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate. Per bug #7913 from Adnan Dursun. Back-patch to all active
branches, since it's been like this for a long time.
|
|
I fixed this code back in commit 841b4a2d5, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00. Per report from Magnus Hagander.
|
|
This function was misdeclared to take cstring when it should take internal.
This at least allows crashing the server, and in principle an attacker
might be able to use the function to examine the contents of server memory.
The correct fix is to adjust the system catalog contents (and fix the
regression tests that should have caught this but failed to). However,
asking users to correct the catalog contents in existing installations
is a pain, so as a band-aid fix for the back branches, install a check
in enum_recv() to make it throw error if called with a cstring argument.
We will later revert this in HEAD in favor of correcting the catalogs.
Our thanks to Sumit Soni (via Secunia SVCRP) for reporting this issue.
Security: CVE-2013-0255
|
|
Dates outside the supported range could be entered, but would not print
reasonably, and operations such as conversion to timestamp wouldn't behave
sanely either. Since this has the potential to result in undumpable table
data, it seems worth back-patching.
Hitoshi Harada
|
|
The dynahash code requires the number of buckets in a hash table to fit
in an int; but since we calculate the desired hash table size dynamically,
there are various scenarios where we might calculate too large a value.
The resulting overflow can lead to infinite loops, division-by-zero
crashes, etc. I (tgl) had previously installed some defenses against that
in commit 299d1716525c659f0e02840e31fbe4dea3, but that covered only one
call path. Moreover it worked by limiting the request size to work_mem,
but in a 64-bit machine it's possible to set work_mem high enough that the
problem appears anyway. So let's fix the problem at the root by installing
limits in the dynahash.c functions themselves.
Trouble report and patch by Jeff Davis.
|
|
This patch changes CREATE INDEX CONCURRENTLY so that the pg_index
flag changes it makes without exclusive lock on the index are made via
heap_inplace_update() rather than a normal transactional update. The
latter is not very safe because moving the pg_index tuple could result in
concurrent SnapshotNow scans finding it twice or not at all, thus possibly
resulting in index corruption.
In addition, fix various places in the code that ought to check to make
sure that the indexes they are manipulating are valid and/or ready as
appropriate. These represent bugs that have existed since 8.2, since
a failed CREATE INDEX CONCURRENTLY could leave a corrupt or invalid
index behind, and we ought not try to do anything that might fail with
such an index.
Also fix RelationReloadIndexInfo to ensure it copies all the pg_index
columns that are allowed to change after initial creation. Previously we
could have been left with stale values of some fields in an index relcache
entry. It's not clear whether this actually had any user-visible
consequences, but it's at least a bug waiting to happen.
This is a subset of a patch already applied in 9.2 and HEAD. Back-patch
into all earlier supported branches.
Tom Lane and Andres Freund
|
|
Some platforms throw an exception for this division, rather than returning
a necessarily-overflowed result. Since we were testing for overflow after
the fact, an exception isn't nice. We can avoid the problem by treating
division by -1 as negation.
Add some regression tests so that we'll find out if any compilers try to
optimize away the overflow check conditions.
Back-patch of commit 1f7cb5c30983752ff8de833de30afcaee63536d0.
Per discussion with Xi Wang, though this is different from the patch he
submitted.
|
|
The previous definitions of these GUC variables allowed them to range
up to INT_MAX, but in point of fact the underlying code would suffer
overflows or other errors with large values. Reduce the maximum values
to something that won't misbehave. There's no apparent value in working
harder than this, since very large delays aren't sensible for any of
these. (Note: the risk with archive_timeout is that if we're late
checking the state, the timestamp difference it's being compared to
might overflow. So we need some amount of slop; the choice of INT_MAX/2
is arbitrary.)
Per followup investigation of bug #7670. Although this isn't a very
significant fix, might as well back-patch.
|
|
The correct answer for this (or any other case with arg2 = -1) is zero,
but some machines throw a floating-point exception instead of behaving
sanely. Commit f9ac414c35ea084ff70c564ab2c32adb06d5296f dealt with this
in int4mod, but overlooked the fact that it also happens in int8mod
(at least on my Linux x86_64 machine). Protect int2mod as well; it's
not clear whether any machines fail there (mine does not) but since the
test is so cheap it seems better safe than sorry. While at it, simplify
the original guard in int4mod: we need only check for arg2 == -1, we
don't need to check arg1 explicitly.
Xi Wang, with some editing by me.
|
|
record_out() leaks memory: it fails to free the strings returned by the
per-column output functions, and also is careless about detoasted values.
This results in a query-lifespan memory leakage when returning composite
values to the client, because printtup() runs the output functions in the
query-lifespan memory context. Fix it to handle these issues the same way
printtup() does. Also fix a similar leakage in record_send().
(At some point we might want to try to run output functions in
shorter-lived memory contexts, so that we don't need a zero-leakage policy
for them. But that would be a significantly more invasive patch, which
doesn't seem like material for back-patching.)
In passing, use appendStringInfoCharMacro instead of appendStringInfoChar
in the innermost data-copying loop of record_out, to try to shave a few
cycles from this function's runtime.
Per trouble report from Carlos Henrique Reimer. Back-patch to all
supported versions.
|
|
An out-of-memory error during expand_table() on a palloc-based hash table
would leave a partially-initialized entry in the table. This would not be
harmful for transient hash tables, since they'd get thrown away anyway at
transaction abort. But for long-lived hash tables, such as the relcache
hash, this would effectively corrupt the table, leading to crash or other
misbehavior later.
To fix, rearrange the order of operations so that table enlargement is
attempted before we insert a new entry, rather than after adding it
to the hash table.
Problem discovered by Hitoshi Harada, though this is a bit different
from his proposed patch.
|
|
Per bug #7615 from Marko Tiikkaja. Apparently nobody ever tried this
case before ...
|
|
This affects date_in(), and a couple of other funcions that use DecodeDate().
Hitoshi Harada
|
|
If we revoke a grant option from some role X, but X still holds the option
via another grant, we should not recursively revoke the privilege from
role(s) Y that X had granted it to. This was supposedly fixed as one
aspect of commit 4b2dafcc0b1a579ef5daaa2728223006d1ff98e9, but I must not
have tested it, because in fact that code never worked: it forgot to shift
the grant-option bits back over when masking the bits being revoked.
Per bug #6728 from Daniel German. Back-patch to all active branches,
since this has been wrong since 8.0.
|
|
xml_parse() would attempt to fetch external files or URLs as needed to
resolve DTD and entity references in an XML value, thus allowing
unprivileged database users to attempt to fetch data with the privileges
of the database server. While the external data wouldn't get returned
directly to the user, portions of it could be exposed in error messages
if the data didn't parse as valid XML; and in any case the mere ability
to check existence of a file might be useful to an attacker.
The ideal solution to this would still allow fetching of references that
are listed in the host system's XML catalogs, so that documents can be
validated according to installed DTDs. However, doing that with the
available libxml2 APIs appears complex and error-prone, so we're not going
to risk it in a security patch that necessarily hasn't gotten wide review.
So this patch merely shuts off all access, causing any external fetch to
silently expand to an empty string. A future patch may improve this.
In HEAD and 9.2, also suppress warnings about undefined entities, which
would otherwise occur as a result of not loading referenced DTDs. Previous
branches don't show such warnings anyway, due to different error handling
arrangements.
Credit to Noah Misch for first reporting the problem, and for much work
towards a solution, though this simplistic approach was not his preference.
Also thanks to Daniel Veillard for consultation.
Security: CVE-2012-3489
|
|
DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed. This seems inappropriate, so make it work like the
not-signed case. The inconsistency was introduced in my commit
f867339c0148381eb1d01f93ab5c79f9d10211de, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.
Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields. This seems to be an aboriginal
mistake in Lockhart's commit 2cf1642461536d0d8f3a1cf124ead0eac04eb760.
Add regression test cases to illustrate the changed behaviors.
Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.
Range problem reported and diagnosed by Amit Kapila, tmask problem by me.
|
|
rfree() failed to cope with the case that pg_regcomp() had initialized the
regex_t struct but then failed to allocate any memory for re->re_guts (ie,
the first malloc call in pg_regcomp() failed). It would try to touch the
guts struct anyway, and thus dump core. This is a sufficiently narrow
corner case that it's not surprising it's never been seen in the field;
but still a bug is a bug, so patch all active branches.
Noted while investigating whether we need to call pg_regfree after a
failure return from pg_regcomp. Other than this bug, it turns out we
don't, so adjust comments appropriately.
|
|
Back-patch of commits 628cbb50ba80c83917b07a7609ddec12cda172d0 and
c6aae3042be5249e672b731ebeb21875b5343010. This has been broken since
7.3, so back-patch to all supported branches.
|
|
Back-patch of commits 72dd6291f216440f6bb61a8733729a37c7e3b2d2,
f6a05fd973a102f7e66c491d3f854864b8d24844, and
60e9c224a197aa37abb1aa3aefa3aad42da61f7f.
This is needed to support fixing the regex prefix extraction bug in
back branches.
|
|
Previously, pattern_fixed_prefix() was defined to return whatever fixed
prefix it could extract from the pattern, plus the "rest" of the pattern.
That definition was sensible for LIKE patterns, but not so much for
regexes, where reconstituting a valid pattern minus the prefix could be
quite tricky (certainly the existing code wasn't doing that correctly).
Since the only thing that callers ever did with the "rest" of the pattern
was to pass it to like_selectivity() or regex_selectivity(), let's cut out
the middle-man and just have pattern_fixed_prefix's subroutines do this
directly. Then pattern_fixed_prefix can return a simple selectivity
number, and the question of how to cope with partial patterns is removed
from its API specification.
While at it, adjust the API spec so that callers who don't actually care
about the pattern's selectivity (which is a lot of them) can pass NULL for
the selectivity pointer to skip doing the work of computing a selectivity
estimate.
This patch is only an API refactoring that doesn't actually change any
processing, other than allowing a little bit of useless work to be skipped.
However, it's necessary infrastructure for my upcoming fix to regex prefix
extraction, because after that change there won't be any simple way to
identify the "rest" of the regex, not even to the low level of fidelity
needed by regex_selectivity. We can cope with that if regex_fixed_prefix
and regex_selectivity communicate directly, but not if we have to work
within the old API. Hence, back-patch to all active branches.
|
|
It's not very sensible to set such attributes on a handler function;
but if one were to do so, fmgr.c went into infinite recursion because
it would call fmgr_security_definer instead of the handler function proper.
There is no way for fmgr_security_definer to know that it ought to call the
handler and not the original function referenced by the FmgrInfo's fn_oid,
so it tries to do the latter, causing the whole process to start over
again.
Ordinarily such misconfiguration of a procedural language's handler could
be written off as superuser error. However, because we allow non-superuser
database owners to create procedural languages and the handler for such a
language becomes owned by the database owner, it is possible for a database
owner to crash the backend, which ideally shouldn't be possible without
superuser privileges. In 9.2 and up we will adjust things so that the
handler functions are always owned by superusers, but in existing branches
this is a minor security fix.
Problem noted by Noah Misch (after several of us had failed to detect
it :-(). This is CVE-2012-2655.
|
|
We used to only allow offsets less than +/-13 hours, then it was +/14,
then it was +/-15. That's still not good enough though, as per today's bug
report from Patric Bechtel. This time I actually looked through the Olson
timezone database to find the largest offsets used anywhere. The winners
are Asia/Manila, at -15:56:00 until 1844, and America/Metlakatla, at
+15:13:42 until 1867. So we'd better allow offsets less than +/-16 hours.
Given the history, we are way overdue to have some greppable #define
symbols controlling this, so make some ... and also remove an obsolete
comment that didn't get fixed the last time.
Back-patch to all supported branches.
|
|
Previously, casts to name could generate invalidly-encoded results.
Also, make these functions match namein() more exactly, by consistently
using palloc0() instead of ad-hoc zeroing code.
Back-patch to all supported branches.
Karl Schnaitter and Tom Lane
|
|
Normally whole-row Vars are printed as "tabname.*". However, that does not
work at top level of a targetlist, because per SQL standard the parser will
think that the "*" should result in column-by-column expansion; which is
not at all what a whole-row Var implies. We used to just print the table
name in such cases, which works most of the time; but it fails if the table
name matches a column name available anywhere in the FROM clause. This
could lead for instance to a view being interpreted differently after dump
and reload. Adding parentheses doesn't fix it, but there is a reasonably
simple kluge we can use instead: attach a no-op cast, so that the "*" isn't
syntactically at top level anymore. This makes the printing of such
whole-row Vars a lot more consistent with other Vars, and may indeed fix
more cases than just the reported one; I'm suspicious that cases involving
schema qualification probably didn't work properly before, either.
Per bug report and fix proposal from Abbas Butt, though this patch is quite
different in detail from his.
Back-patch to all supported versions.
|
|
estimate_num_groups() gets unhappy with
create table empty();
select * from empty except select * from empty e2;
I can't see any actual use-case for such a query (and the table is illegal
per SQL spec), but it seems like a good idea that it not cause an assert
failure.
|
|
When default_text_search_config, default_tablespace, or temp_tablespaces
setting is set per-user or per-database, with an "ALTER USER/DATABASE SET
..." statement, don't throw an error if the text search configuration or
tablespace does not exist. In case of text search configuration, even if
it doesn't exist in the current database, it might exist in another
database, where the setting is intended to have its effect. This behavior
is now the same as search_path's.
Tablespaces are cluster-wide, so the same argument doesn't hold for
tablespaces, but there's a problem with pg_dumpall: it dumps "ALTER USER
SET ..." statements before the "CREATE TABLESPACE" statements. Arguably
that's pg_dumpall's fault - it should dump the statements in such an order
that the tablespace is created first and then the "ALTER USER SET
default_tablespace ..." statements after that - but it seems better to be
consistent with search_path and default_text_search_config anyway. Besides,
you could still create a dump that throws an error, by creating the
tablespace, running "ALTER USER SET default_tablespace", then dropping the
tablespace and running pg_dumpall on that.
Backpatch to all supported versions.
|
|
I forgot to change the functions to use the PG_GETARG_INET_PP() macro,
when I changed DatumGetInetP() to unpack the datum, like Datum*P macros
usually do. Also, I screwed up the definition of the PG_GETARG_INET_PP()
macro, and didn't notice because it wasn't used.
This fixes the memory leak when sorting inet values, as reported
by Jochen Erwied and debugged by Andres Freund. Backpatch to 8.3, like
the previous patch that broke it.
|
|
Since record[] uses array_in, it needs to have its element type passed
as typioparam. In HEAD and 9.1, this fix essentially reverts commit
9bc933b2125a5358722490acbc50889887bf7680, which was a hack that is no
longer needed since domains don't set their typelem anymore. Before
that, adjust the logic so that only domains are excluded from being
treated like arrays, rather than assuming that only base types should
be included. Add a regression test to demonstrate the need for this.
Per report from Maxim Boguk.
Back-patch to 8.4, where type record[] was added.
|
|
On a platform that isn't supplying __FILE__, previous coding would either
crash or give a stale result for the filename string. Not sure how likely
that is, but the original code catered for it, so let's keep doing so.
|
|
In vpath builds, the __FILE__ macro that is used in verbose error
reports contains the full absolute file name, which makes the error
messages excessively verbose. So keep only the base name, thus
matching the behavior of non-vpath builds.
|
|
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
|
|
If a tuple in a syscache contains an out-of-line toasted field, and we
try to fetch that field shortly after some other transaction has committed
an update or deletion of the tuple, there is a race condition: vacuum
could come along and remove the toast tuples before we can fetch them.
This leads to transient failures like "missing chunk number 0 for toast
value NNNNN in pg_toast_2619", as seen in recent reports from Andrew
Hammond and Tim Uckun.
The design idea of syscache is that access to stale syscache entries
should be prevented by relation-level locks, but that fails for at least
two cases where toasted fields are possible: ANALYZE updates pg_statistic
rows without locking out sessions that might want to plan queries on the
same table, and CREATE OR REPLACE FUNCTION updates pg_proc rows without
any meaningful lock at all.
The least risky fix seems to be an idea that Heikki suggested when we
were dealing with a related problem back in August: forcibly detoast any
out-of-line fields before putting a tuple into syscache in the first place.
This avoids the problem because at the time we fetch the parent tuple from
the catalog, we should be holding an MVCC snapshot that will prevent
removal of the toast tuples, even if the parent tuple is outdated
immediately after we fetch it. (Note: I'm not convinced that this
statement holds true at every instant where we could be fetching a syscache
entry at all, but it does appear to hold true at the times where we could
fetch an entry that could have a toasted field. We will need to be a bit
wary of adding toast tables to low-level catalogs that don't have them
already.) An additional benefit is that subsequent uses of the syscache
entry should be faster, since they won't have to detoast the field.
Back-patch to all supported versions. The problem is significantly harder
to reproduce in pre-9.0 releases, because of their willingness to flush
every entry in a syscache whenever the underlying catalog is vacuumed
(cf CatalogCacheFlushRelation); but there is still a window for trouble.
|
|
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
|
|
This oversight meant that on Windows, the pg_settings view would not
display source file or line number information for values coming from
postgresql.conf, unless the backend had received a SIGHUP since starting.
In passing, also make the error detection in read_nondefault_variables a
tad more thorough, and fix it to not lose precision on float GUCs (these
changes are already in HEAD as of my previous commit).
|
|
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
|
|
The code in shift_jis_20042euc_jis_2004() would fetch two bytes even when
only one remained in the string. Since conversion functions aren't
supposed to assume null-terminated input, this poses a small risk of
fetching past the end of memory and incurring SIGSEGV. No such crash has
been identified in the field, but we've certainly seen the equivalent
happen in other code paths, so patch this one all the way back.
Report and patch by Noah Misch.
|
|
Examination of examples provided by Mark Kirkwood and others has convinced
me that actually commit 7f3eba30c9d622d1981b1368f2d79ba0999cdff2 was quite
a few bricks shy of a load. The useful part of that patch was clamping
ndistinct for the inner side of a semi or anti join, and the reason why
that's needed is that it's the only way that restriction clauses
eliminating rows from the inner relation can affect the estimated size of
the join result. I had not clearly understood why the clamping was
appropriate, and so mis-extrapolated to conclude that we should clamp
ndistinct for the outer side too, as well as for both sides of regular
joins. These latter actions were all wrong, and are reverted with this
patch. In addition, the clamping logic is now made to affect the behavior
of both paths in eqjoinsel_semi, with or without MCV lists to compare.
When we have MCVs, we suppose that the most common values are the ones
that are most likely to survive the decimation resulting from a lower
restriction clause, so we think of the clamping as eliminating non-MCV
values, or potentially even the least-common MCVs for the inner relation.
Back-patch to 8.4, same as previous fixes in this area.
|
|
This patch fixes an oversight in my commit
7f3eba30c9d622d1981b1368f2d79ba0999cdff2 of 2008-10-23. That patch
accounted for baserel restriction clauses that reduced the number of rows
coming out of a table (and hence the number of possibly-distinct values of
a join variable), but not for join restriction clauses that might have been
applied at a lower level of join. To account for the latter, look up the
sizes of the min_lefthand and min_righthand inputs of the current join,
and clamp with those in the same way as for the base relations.
Noted while investigating a complaint from Ben Chobot, although this in
itself doesn't seem to explain his report.
Back-patch to 8.4; previous versions used different estimation methods
for which this heuristic isn't relevant.
|
|
It is possible for VACUUM to scan no pages at all, if the visibility map
shows that all pages are all-visible. In this situation VACUUM has no new
information to report about the relation's tuple density, so it wasn't
changing pg_class.reltuples ... but it updated pg_class.relpages anyway.
That's wrong in general, since there is no evidence to justify changing the
density ratio reltuples/relpages, but it's particularly bad if the previous
state was relpages=reltuples=0, which means "unknown tuple density".
We just replaced "unknown" with "zero". ANALYZE would eventually recover
from this, but it could take a lot of repetitions of ANALYZE to do so if
the relation size is much larger than the maximum number of pages ANALYZE
will scan, because of the moving-average behavior introduced by commit
b4b6923e03f4d29636a94f6f4cc2f5cf6298b8c8.
The only known situation where we could have relpages=reltuples=0 and yet
the visibility map asserts everything's visible is immediately following
a pg_upgrade. It might be advisable for pg_upgrade to try to preserve the
relpages/reltuples statistics; but in any case this code is wrong on its
own terms, so fix it. Per report from Sergey Koposov.
Back-patch to 8.4, where the visibility map was introduced, same as the
previous change.
|
|
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
|
|
The previous code tried to synchronize by unlinking the init file twice,
but that doesn't actually work: it leaves a window wherein a third process
could read the already-stale init file but miss the SI messages that would
tell it the data is stale. The result would be bizarre failures in catalog
accesses, typically "could not read block 0 in file ..." later during
startup.
Instead, hold RelCacheInitLock across both the unlink and the sending of
the SI messages. This is more straightforward, and might even be a bit
faster since only one unlink call is needed.
This has been wrong since it was put in (in 2002!), so back-patch to all
supported releases.
|
|
The previous code went into an infinite loop after overflow. In fact,
an overflow is not really an error; it just means that the current
value is the last one we need to return. So, just arrange to stop
immediately when overflow is detected.
Back-patch all the way.
|
