| Age | Commit message (Collapse) | Author |
|---|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 884f33d735870f94357820800840af3e93ff4628
|
|
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 3a5a71cccad5c68e01008e9e3a4f06930197a05e
|
|
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
|
|
|
|
|
|
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
|
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
|
|
In some cases Oracle Pro*C handles char array differently than ECPG. This patch
adds a Oracle compatibility mode to make ECPG behave like Pro*C.
Patch by David Rader <davidr@openscg.com>
|
|
Patch by Patrick Krecker <patrick@judicata.com>
|
|
Patch by Jeevan Ladhe <jeevan.ladhe@enterprisedb.com>
|
|
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
Patch by: "Rader, David" <davidr@openscg.com>
|
|
Patch by Ashutosh Sharma <ashu.coek88@gmail.com>
|
|
Backpatch-through: certain files through 9.3
|
|
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
|
|
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
|
|
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
Flex generates a lot of functions that are not actually used. In order
to avoid coverage figures being ruined by that, mark up the part of the
.l files where the generated code appears by lcov exclusion markers.
That way, lcov will typically only reported on coverage for the .l file,
which is under our control, but not for the .c file.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
or array variables.
|
|
The parenthesized style has only been used in a few modules. Change
that to use the style that is predominant across the whole tree.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
|
|
Author: Vinayak Pokale
Reviewed-By: Masahiko Sawada
|
|
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 1a0b5e655d7871506c2b1c7ba562c2de6b6a55de
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: c5a8de3653bb1af6b0eb41cc6bf090c5522df52b
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 398beeef4921df0956f917becd7b5669d2a8a5c4
|
|
Fix all perlcritic warnings of severity level 5, except in
src/backend/utils/Gen_dummy_probes.pl, which is automatically generated.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
|
|
based on patch from Josh Soref <jsoref@gmail.com>
|
|
|
|
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
|
|
Backpatch to all supported versions, where applicable, to make backpatching
of future fixes go more smoothly.
Josh Soref
Discussion: https://www.postgresql.org/message-id/CACZqfqCf+5qRztLPgmmosr-B0Ye4srWzzw_mo4c_8_B_mtjmJQ@mail.gmail.com
|
|
|
|
output file naming.
Patch by Tsunakawa, Takayuki <tsunakawa.takay@jp.fujitsu.com>
|
|
Clean up some technical debt left behind by commit 72b1e3a21: instead of
quickly hacking the name of base_yylex() with a #define, set it properly
with "%option prefix". This causes the names of pgc.l's other exported
symbols to change as well, so run around and modify the outside references
to them as needed. Similarly, make pgc.l's external references to
base_yylval use that variable's true name instead of a macro.
The reason for doing this now is that the quick-hack solution will fail
with future versions of flex, as reported by Дилян Палаузов.
Hence, back-patch into 9.6 where the previous commit appeared, since
it's likely people will build 9.6 with newer flex versions during
its lifetime.
Discussion: https://postgr.es/m/d845c1af-e18d-6651-178f-9f08cdf37e10@aegee.org
|
|
This makes the -? and -V options work consistently with other binaries.
--help and --version are now only recognized as the first option, i.e.
"ecpg --foobar --help" no longer prints the help, but that's consistent
with most of our other binaries, too.
Backpatch to all supported versions.
Haribabu Kommi
Discussion: <CAJrrPGfnRXvmCzxq6Dy=stAWebfNHxiL+Y_z7uqksZUCkW_waQ@mail.gmail.com>
|
|
Once upon a time, it made sense for the ecpg preprocessor to have its
own version number, because it used a manually-maintained grammar that
wasn't always in sync with the core grammar. But those days are
thankfully long gone, leaving only a maintenance nuisance behind.
Let's use the PG v10 version numbering changeover as an excuse to get
rid of the ecpg version number and just have ecpg identify itself by
PG_VERSION. From the user's standpoint, ecpg will go from "4.12" in
the 9.6 branch to "10" in the 10 branch, so there's no failure of
monotonicity.
Discussion: <1471332659.4410.67.camel@postgresql.org>
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: cda21c1d7b160b303dc21dfe9d4169f2c8064c60
|
|
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 17bf3e8564abf600274789fcc90e72532d5e7c05
|
|
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
|
|
|
|
Now that we know about the %top{} trick, we can revert to building flex
lexers as separate .o files. This is worth doing for a couple of reasons
besides sheer cleanliness. We can narrow the scope of the -Wno-error flag
that's forced on scan.c. Also, since these grammar and lexer files are
so large, splitting them into separate build targets should have some
advantages in build speed, particularly in parallel or ccache'd builds.
We have quite a few other .l files that could be changed likewise, but the
above arguments don't apply to them, so the benefit of fixing them seems
pretty minimal. Leave the rest for some other day.
|
|
Oskari Saarenmaa
|
