| Age | Commit message (Collapse) | Author |
|---|
|
standard targets and behaviour. Replaced Makefile.in's with
Makefile's and declared the respective variables in Makefile.global.
maintainer-clean target now available at top level, although it does
not work in the backend tree yet.
Cleanup pass over Makefile.shlib, renamed some targets and variables.
The shared library symlink tests are now done by make, not the shell.
ecpg: Remove one warning in sloppy flex output.
PL/Perl and Perl interface: the MakeMaker documentation is confusing,
the realclean target *does* "delete derived files", but it also
uninstalls them. Don't use that.
The submake targets in the various bin directories that update libpq
should `make all', not `make libpq.a'. That is a) unportable, and
b) doesn't build the shared library.
|
|
Add options to configure to automatically build for Kerberos
support; no more editing of make files.
|
|
|
|
the
tcl-spec in the Makefile.
The patch in the attachemant does this in the src/interfaces/libpgtcl
too
Thank you
Rudolf Weber
|
|
configuration helper things into config/ dir. Adjusted some relative paths
in makefiles.
|
|
the src/include tree, so that -I backend is no longer necessary anywhere.
Also, clean up some bit rot in contrib tree.
|
|
1) adds NetBSD shared lib support on both ELF and a.out platforms
2) replaces "-L$(LIBPQDIR) -lpq" with "$(LIBPQ)" defined in
Makefile.global. This makes it much easier to build stuff in
the source tree after you've already installed the libraries.
3) adds TEMPLATEDIR in Makefile.global that indicates where the
database templates are stored. This separates the template files
from real libraries that are installed in $(LIBDIR).
4) changes include order of <readline/readline.h> and <readline.h>.
The latest GNU readline installs its headers under a readline
subdirectory.
In addition to applying the patch below the following files need to be copied:
backend/port/dynloader:
bsd.h -> netbsd.h
bsd.c -> netbsd.c
include/port:
bsd.h -> netbsd.h
makefiles:
Makefile.bsd -> Makefile.netbsd
It would be great to see this incorporated into the source tree before
the 7.0 release is cut.
Thanks!
-- Johnny C. Lam <lamj@stat.cmu.edu>
|
|
properly.
|
|
backend/Makefiles to be patched could significantly be reduced since
they
have been adopted to the QNX4 needs.
Andreas Kardos
|
|
|
|
|
|
|
|
src/Makefile.shlib. Updated all the makefiles that try to build shlibs
to include that file instead of having duplicate (and mostly incomplete)
copies of shared-library options. It works on HPUX, a lot better than it
did before in fact, but there's a chance I broke some other platforms.
At least now you only have to fix one place not six...
|
|
Get the permissions right, don't overwrite real files with symlinks, etc.
plpgsql and odbc still aren't fully up to speed, but at least they don't crash and burn...
|
|
Include soft links in the installation directory for major version number.
Use the existing $(DLSUFFIX) parameter to name shared library.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Summary of changes:
In pqcomm.h, use the SUN_LEN macro if it is defined to calculate
the size of the sockaddr_un structure.
In unixware.h, drop the use of the UNIXWARE macro. Everything can
be handled with the USE_UNIVEL_CC and DISABLE_COMPLEX_MACRO macros.
In s_lock.h, remove the reference to the UNIXWARE macro (see above).
In the unixware template, add the YFLAGS:-d line.
In various makefile templates, add (or cleanup) unixware and univel
port specific information.
-- Billy G. Allie
|
|
|
|
|
|
|
|
needed.
|
|
... which causes it to build and install the shared version of
libpgtcl under the wrong name, on HPUX only. Patch against
today's sources follows.
|
|
solaris/spare shared libararies, new error message for postmaster
startup, and makefile cleanups.
|
|
HP-UX (all versions) requires shared libraries to have execute
permission, and really needs them to be exactly mode 555 for
performance reasons. The standard configure/install procedure
installs libpq.sl as mode 644, which DOES NOT WORK.
The attached patch modifies the makefiles to distinguish
INSTL_LIB_OPTS (install mode for ordinary libraries) from
INSTL_SHLIB_OPTS (mode for shared libs), and adds a test
to configure to set INSTL_SHLIB_OPTS="-m 555" when on HP-UX.
|
|
|
|
|
|
|
|
|
|
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
|
|
|
|
the configuration of v6.3.1. I have replaced the queries for
include/lib directories with --with configuration options. I have
also included a list of potential tcl/tk include directories directly
in the CPPFLAGS variable. As new versions are needed, these should
be added to the list in reverse numerical order (libraries are in
a separate list near the end). This greatly simplifies the later
checks if --with-tcl is set. I hope this solution works for
everyone.
I also added a check to disable the perl support if postgres was
not already installed (as per the instructions in the directory).
By the way, why must there be an installed pgsql to compile perl
support? This seems odd, at best.
Finally, I changed the Makefile in the libpgtcl interface to place
the shared libraries at the end of the list of files, not at the
beginning. With NetBSD at least, libraries are linked in order,
so the original sequence does not work.
Brook Milligan
|
|
|
|
It is my hope that the following "patches" to libpgtcl get included
in the next release.
See the update to the README file to get a full description of the changes.
This version of libpgtcl is completely interpreter-safe, implements the
database connection handle as a channel (no events yet, but will make it
a lot easier to do fileevents on it in the future), and supports the SQL
"copy table to stdout" and "copy table from stdin" commands, with the
I/O being from and to the connection handle. The connection and result
handles are formatted in a way to make access to the tables more efficient.
|
|
Apart from this Makefile hack, all I've done is to make dynamically
loaded code modules fail properly (as was already done for __mips__,
although I think this is too loose: I believe NetBSD for the pmax can
do dynamic linking), and to add test-and-set lock handling. As Bruce
suggested, this is done in a maximally efficient inlined way: I was
not aware that this code was so important, speed-wise.
|
|
The attached patches will allow postgreSQL to compile successfully on SCO
UNIXWARE 2.1.x. The patches fix the following problems:
1. Configure did not properly recognize the UNIXWARE system as needing the
univel port. It used the sys4 port.
2. Configure did not properly process the CC flag in the template file.
3. There was no working test and set locking implementation for the native
UNIXWARE compiler.
4. The test and set locking used for Intel X86 that was selected by defining
NEED_I386_TAS_ASM could fail in a multi-processor environment.
5. The makefiles for libpq and libpgtcl did not make a shared library for
the univel port.
|
|
From: Tom I Helbekkmo <tih@Hamartun.Priv.NO>
|
