| Age | Commit message (Collapse) | Author |
|---|
|
This is purely cosmetic, as dsm_attach() interprets its argument as
a dsm_handle (i.e., an unsigned integer), but we might as well fix
it.
Oversight in commit 4db3744f1f.
Author: Jianghua Yang <yjhjstz@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAAZLFmRxkUD5jRs0W3K%3DUe4_ZS%2BRcAb0PCE1S0vVJBn3sWH2UQ%40mail.gmail.com
Backpatch-through: 13
|
|
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
|
|
Backpatch-through: 13
|
|
as determined by IWYU
Similar to commit dbbca2cf299, but for contrib, pl, and src/test/.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf65 and
8d9978a7176, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Two custom wait events are added here:
- "TestShmMqBgWorkerStartup", when setting up a set of bgworkers in
wait_for_workers_to_become_ready().
- "TestShmMqMessageQueue", when waiting for a queued message in
test_shm_mq_pipelined().
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
|
|
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
|
|
Previously, meson installed modules under src/test/modules/ as part of
a normal installation, even though these files are only meant for use
by tests. This is because there is no way to set up up the build
system to install extra things only when told.
This patch fixes that with a workaround: We don't install these
modules as part of meson install, but we create a new "test" that runs
before the real tests whose action it is to install these files. The
installation is done by manual copies using a small helper script.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2a039e8e-f31f-31e8-afe7-bab3130ad2de%40enterprisedb.com
|
|
This new header contains all the variable-length data types support
(TOAST support) from postgres.h, which isn't needed by large parts of
the backend code.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/ddcce239-0f29-6e62-4b47-1f8ca742addf%40enterprisedb.com
|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net
|
|
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
This is in preparation for defaulting to -fvisibility=hidden in extensions,
instead of relying on all symbols in extensions to be exported.
This should have been committed before 089480c0770, but something in my commit
scripts went wrong.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
|
|
The prior commit declared them centrally.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
|
|
Backpatch-through: 10
|
|
Do not update shm_mq's mq_bytes_written until we have written
an amount of data greater than 1/4th of the ring size, unless
the caller of shm_mq_send(v) requests a flush at the end of
the message. This reduces the number of calls to SetLatch(),
and also the number of CPU cache misses, considerably, and thus
makes shm_mq significantly faster.
Dilip Kumar, reviewed by Zhihong Yu and Tomas Vondra. Some
minor cosmetic changes by me.
Discussion: http://postgr.es/m/CAFiTN-tVXqn_OG7tHNeSkBbN+iiCZTiQ83uakax43y1sQb2OBA@mail.gmail.com
|
|
The error messages using the word "non-negative" are confusing
because it's ambiguous about whether it accepts zero or not.
This commit improves those error messages by replacing it with
less ambiguous word like "greater than zero" or
"greater than or equal to zero".
Also this commit added the note about the word "non-negative" to
the error message style guide, to help writing the new error messages.
When postgres_fdw option fetch_size was set to zero, previously
the error message "fetch_size requires a non-negative integer value"
was reported. This error message was outright buggy. Therefore
back-patch to all supported versions where such buggy error message
could be thrown.
Reported-by: Hou Zhijie
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Fujii Masao
Discussion: https://postgr.es/m/OS0PR01MB5716415335A06B489F1B3A8194569@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
Backpatch-through: 9.5
|
|
Previously test_shm_mq worker used the stripped-down version of die()
as the SIGTERM signal handler. This commit makes it use die(), instead,
to simplify the code.
In terms of the code, the difference between die() and the stripped-down
version previously used is whether the signal handler directly may call
ProcessInterrupts() or not. But this difference doesn't exist in
a background worker because, in bgworker, DoingCommandRead flag will
never be true and die() will never call ProcessInterrupts() directly.
Therefore test_shm_mq worker can safely use die(), like other bgworker
proceses (e.g., logical replication apply launcher or autoprewarm worker)
currently do.
Thanks to Craig Ringer for the report and investigation of the issue.
Author: Bharath Rupireddy
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAGRY4nxsAe_1k_9g5b47orA0S011iBoHsXHFMH7cg7HV0O1bwQ@mail.gmail.com
|
|
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
|
|
Similar to commit 7e735035f2, this commit makes the order of header file
inclusion consistent for non-backend modules.
In passing, fix the case where we were using angle brackets (<>) for the
local module includes instead of quotes ("").
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
|
|
Historically, we've allowed auxiliary processes to take buffer pins without
tracking them in a ResourceOwner. However, that creates problems for error
recovery. In particular, we've seen multiple reports of assertion crashes
in the startup process when it gets an error while holding a buffer pin,
as for example if it gets ENOSPC during a write. In a non-assert build,
the process would simply exit without releasing the pin at all. We've
gotten away with that so far just because a failure exit of the startup
process translates to a database crash anyhow; but any similar behavior
in other aux processes could result in stuck pins and subsequent problems
in vacuum.
To improve this, institute a policy that we must *always* have a resowner
backing any attempt to pin a buffer, which we can enforce just by removing
the previous special-case code in resowner.c. Add infrastructure to make
it easy to create a process-lifespan AuxProcessResourceOwner and clear
out its contents at appropriate times. Replace existing ad-hoc resowner
management in bgwriter.c and other aux processes with that. (Thus, while
the startup process gains a resowner where it had none at all before, some
other aux process types are replacing an ad-hoc resowner with this code.)
Also use the AuxProcessResourceOwner to manage buffer pins taken during
StartupXLOG and ShutdownXLOG, even when those are being run in a bootstrap
process or a standalone backend rather than a true auxiliary process.
In passing, remove some other ad-hoc resource owner creations that had
gotten cargo-culted into various other places. As far as I can tell
that was all unnecessary, and if it had been necessary it was incomplete,
due to lacking any provision for clearing those resowners later.
(Also worth noting in this connection is that a process that hasn't called
InitBufferPoolBackend has no business accessing buffers; so there's more
to do than just add the resowner if we want to touch buffers in processes
not covered by this patch.)
Although this fixes a very old bug, no back-patch, because there's no
evidence of any significant problem in non-assert builds.
Patch by me, pursuant to a report from Justin Pryzby. Thanks to
Robert Haas and Kyotaro Horiguchi for reviews.
Discussion: https://postgr.es/m/20180627233939.GA10276@telsasoft.com
|
|
Backpatch-through: certain files through 9.3
|
|
Add bgw_type field to background worker structure. It is intended to be
set to the same value for all workers of the same type, so they can be
grouped in pg_stat_activity, for example.
The backend_type column in pg_stat_activity now shows bgw_type for a
background worker. The ps listing also no longer calls out that a
process is a background worker but just show the bgw_type. That way,
being a background worker is more of an implementation detail now that
is not shown to the user. However, most log messages still refer to
'background worker "%s"'; otherwise constructing sensible and
translatable log messages would become tricky.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Given the possibility of race conditions and so on, it seems entirely
unsafe to just assume that shm_toc_lookup() always finds the key it's
looking for --- but that was exactly what all but one call site were
doing. To fix, add a "bool noError" argument, similarly to what we
have in many other functions, and throw an error on an unexpected
lookup failure. Remove now-redundant Asserts that a rather random
subset of call sites had.
I doubt this will throw any light on buildfarm member lorikeet's
recent failures, because if an unnoticed lookup failure were involved,
you'd kind of expect a null-pointer-dereference crash rather than the
observed symptom. But you never know ... and this is better coding
practice even if it never catches anything.
Discussion: https://postgr.es/m/9697.1496675981@sss.pgh.pa.us
|
|
Coverity complained because bgw.bgw_extra wasn't being filled in by
ApplyLauncherRegister(). The most future-proof fix is to memset the
whole BackgroundWorker struct to zeroes. While at it, let's apply the
same coding rule to other places that set up BackgroundWorker structs;
four out of five had the same or related issues.
|
|
On EXEC_BACKEND builds, this can fail if ASLR is in use.
Backpatch to 9.5. On master, completely remove the bgw_main field
completely, since there is no situation in which it is safe for an
EXEC_BACKEND build. On 9.6 and 9.5, leave the field intact to avoid
breaking things for third-party code that doesn't care about working
under EXEC_BACKEND. Prior to 9.5, there are no in-core bgworker
entrypoints.
Petr Jelinek, reviewed by me.
Discussion: http://postgr.es/m/09d8ad33-4287-a09b-a77f-77f8761adb5e@2ndquadrant.com
|
|
|
|
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
|
|
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
|
|
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
|
|
On closer inspection, the reason copyright.pl was missing files is
that it is looking for 'Copyright (c)' and they had 'Copyright (C)'.
Fix that, and update a couple more that grepping for that revealed.
|
|
Manually fix some copyright lines missed by the automated script.
|
|
This flag has proven to be a recipe for bugs, and it doesn't seem like
it can really buy anything in terms of performance. So let's just
*always* set the process latch when we receive SIGUSR1 instead of
trying to do it only when needed.
Per my recent proposal on pgsql-hackers.
|
|
This improves on commit bbfd7edae5aa5ad5553d3c7e102f2e450d4380d4 by
making two simple changes:
* pg_attribute_noreturn now takes parentheses, ie pg_attribute_noreturn().
Likewise pg_attribute_unused(), pg_attribute_packed(). This reduces
pgindent's tendency to misformat declarations involving them.
* attributes are now always attached to function declarations, not
definitions. Previously some places were taking creative shortcuts,
which were not merely candidates for bad misformatting by pgindent
but often were outright wrong anyway. (It does little good to put a
noreturn annotation where callers can't see it.) In any case, if
we would like to believe that these macros can be used with non-gcc
compilers, we should avoid gratuitous variance in usage patterns.
I also went through and manually improved the formatting of a lot of
declarations, and got rid of excessively repetitive (and now obsolete
anyway) comments informing the reader what pg_attribute_printf is for.
|
|
Right now, there's only one flag, DSM_CREATE_NULL_IF_MAXSEGMENTS,
which suppresses the error that would normally be thrown when the
maximum number of segments already exists, instead returning NULL.
It might be useful to add more flags in the future, such as one to
ignore allocation errors, but I haven't done that here.
|
|
Until now __attribute__() was defined to be empty for all compilers but
gcc. That's problematic because it prevents using it in other compilers;
which is necessary e.g. for atomics portability. It's also just
generally dubious to do so in a header as widely included as c.h.
Instead add pg_attribute_format_arg, pg_attribute_printf,
pg_attribute_noreturn macros which are implemented in the compilers that
understand them. Also add pg_attribute_noreturn and pg_attribute_packed,
but don't provide fallbacks, since they can affect functionality.
This means that external code that, possibly unwittingly, relied on
__attribute__ defined to be empty on !gcc compilers may now run into
warnings or errors on those compilers. But there shouldn't be many
occurances of that and it's hard to work around...
Discussion: 54B58BA3.8040302@ohmu.fi
Author: Oskari Saarenmaa, with some minor changes by me.
|
|
Now that nothing sets ImmediateInterruptOK to true anymore, we can
remove all the supporting code.
Reviewed-By: Heikki Linnakangas
|
|
To do so, move InitializeLatchSupport() into the new common process
initialization functions, and add a new global variable MyLatch.
MyLatch is usable as soon InitPostmasterChild() has been called
(i.e. very early during startup). Initially it points to a process
local latch that exists in all processes. InitProcess/InitAuxiliaryProcess
then replaces that local latch with PGPROC->procLatch. During shutdown
the reverse happens.
This is primarily advantageous for two reasons: For one it simplifies
dealing with the shared process latch, especially in signal handlers,
because instead of having to check for MyProc, MyLatch can be used
unconditionally. For another, a later patch that makes FEs/BE
communication use latches, now can rely on the existence of a latch,
even before having gone through InitProcess.
Discussion: 20140927191243.GD5423@alap3.anarazel.de
|
|
This is advance preparation for introducing even more test modules; the
easy solution is to add them to contrib, but that's bloated enough that
it seems a good time to think of something different.
Moved modules are dummy_seclabel, test_shm_mq, test_parser and
worker_spi.
(test_decoding was also a candidate, but there was too much opposition
to moving that one. We can always reconsider later.)
|
