| Age | Commit message (Collapse) | Author |
|---|
|
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
|
|
... and remove the list of \pset options from the general \? output.
That list was getting out of hand, both for developers to keep up to
date as well as for users to read.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202511041638.dm4qukcxfjto@alvherre.pgsql
|
|
Stored generated columns are not yet computed when the filtering
happens, so we need to prohibit them to avoid incorrect behavior.
Virtual generated columns currently error out ("unexpected virtual
generated column reference"). They could probably work if we expand
them in the right place, but for now let's keep them consistent with
the stored variant. This doesn't change the behavior, it only gives a
nicer error message.
Co-authored-by: jian he <jian.universality@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxHb8YPQ095R_pYDr77W9XKNaXg5Rzy-WP525mkq+hRM3g@mail.gmail.com
|
|
Before commit e25626677f, spinlocks were implemented using semaphores
on some platforms (--disable-spinlocks). That made it necessary to
initialize semaphores early, before any spinlocks could be used. Now
that we don't support --disable-spinlocks anymore, we can allocate the
shared memory needed for semaphores the same way as other shared
memory structures. Since the semaphores are used only in the PGPROC
array, move the semaphore shmem size estimation and initialization
calls to ProcGlobalShmemSize() and InitProcGlobal().
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAExHW5seSZpPx-znjidVZNzdagGHOk06F+Ds88MpPUbxd1kTaA@mail.gmail.com
|
|
Before commit e25626677f, PGReserveSemaphores() had to be called
before SpinlockSemaInit() because spinlocks were implemented using
semaphores on some platforms (--disable-spinlocks). Add a comment
explaining that.
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAExHW5seSZpPx-znjidVZNzdagGHOk06F+Ds88MpPUbxd1kTaA@mail.gmail.com
Backpatch-to: 18
|
|
Discussion: https://www.postgresql.org/message-id/flat/E1vEsbx-004QDO-0o%40gemulon.postgresql.org
|
|
Fix a typo, add some missing conjunctions, and make a sentence flow
more smoothly.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://postgr.es/m/CA%2BrenyXZgwzegmO5t%3DUSU%3D9Wo5bc-YqNf-6E7Nv7e577DCmYXA%40mail.gmail.com
|
|
Test failure on buildfarm member prion:
The test failed due to an unexpected LOCATION: line appearing between the
WARNING and ERROR messages. This occurred because the prion machine uses
log_error_verbosity = verbose, which includes additional context in error
messages. The test was originally checking for both WARNING and ERROR
messages in sequence sync, but the extra LOCATION: line disrupted this
pattern. To make the test robust across different verbosity settings, it
now only checks for the presence of the WARNING message after the test,
which is sufficient to validate the intended behavior.
Failure to sync sequences with quoted names:
The previous implementation did not correctly quote sequence names when
querying remote information, leading to failures when quoted sequence
names were used. This fix ensures that sequence names are properly quoted
during remote queries, allowing sequences with quoted identifiers to be
synced correctly.
Author: Vignesh C <vignesh21@gmail.com>
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm0WcdSCoNPiE-5ek4J2dMJ5o111GPTzKCYj9G5i=ONYtQ@mail.gmail.com
Discussion: https://postgr.es/m/CAOzEurQOSN=Zcp9uVnatNbAy=2WgMTJn_DYszYjv0KUeQX_e_A@mail.gmail.com
|
|
Since OpenBSD core dumps do not embed executable paths, the script now
searches for the corresponding binary manually within the specified
directory before invoking LLDB. This is imperfect but should find the
right executable in practice, as needed for meaningful backtraces.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ36R74TZ8RKsFueYwLxGKDAm3LU2FHM_ZUCSB6imd3vYA@mail.gmail.com
Backpatch-through: 18
|
|
Like relation_stats.c, these structures are used to track the argument
number, names and types of pg_restore_attribute_stats() and
pg_clear_attribute_stats().
Extracted from a larger patch by the same author, reworded by me for
consistency with relation_stats.c.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
|
|
Some of the changes in pg_config.h.in from commit 3853a6956c3 didn't
match the order that a fresh run would produce.
|
|
Should have been part of commit a13833c35f9.
|
|
03d40e4b5 added code to provide better row estimates for when a UNION
query ended up only with a single child due to other children being
found to be dummy rels. In that case, ordinarily it would be ok to call
estimate_num_groups() on the targetlist of the only child path, however
that's not safe to do if the UNION child is the result of some other set
operation as we generate targetlists containing Vars with varno==0 for
those, which estimate_num_groups() can't handle. This could lead to:
ERROR: XX000: no relation entry for relid 0
Fix this by avoiding doing this when the only child is the result of
another set operation. In that case we'll fall back on the
assume-all-rows-are-unique method.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/cfbc99e5-9d44-4806-ba3c-f36b57a85e21@gmail.com
|
|
Commit 27cc7cd2b removed the epqScanDone flag from the EState struct,
and instead added an equivalent flag named relsubs_done to the EPQState
struct; but it failed to update this comment.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK152zJ3fU5avDT5udfL0namrDeVfMTL3dxdOXw28SOrycg%40mail.gmail.com
Backpatch-through: 13
|
|
Various places that were using StringInfo but didn't need that
StringInfo to exist beyond the scope of the function were using
makeStringInfo(), which allocates both a StringInfoData and the buffer it
uses as two separate allocations. It's more efficient for these cases to
use a StringInfoData on the stack and initialize it with initStringInfo(),
which only allocates the string buffer. This also simplifies the cleanup,
in a few cases.
Author: Mats Kindahl <mats.kindahl@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4379aac8-26f1-42f2-a356-ff0e886228d3@gmail.com
|
|
We've successfully used libsanitizer for awhile with the undefined
and alignment sanitizers, but with some other sanitizers (at least
thread and hwaddress) it crashes due to internal recursion before
it's fully initialized itself. It turns out that that's due to the
"__ubsan_default_options" hack installed by commit f686ae82f, and we
can fix it by ensuring that __ubsan_default_options is built without
any sanitizer instrumentation hooks.
Reported-by: Emmanuel Sibi <emmanuelsibi.mec@gmail.com>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Diagnosed-by: Emmanuel Sibi <emmanuelsibi.mec@gmail.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/F7543B04-E56C-4D68-A040-B14CCBAD38F1@gmail.com
Discussion: https://postgr.es/m/dbf77bf7-6e54-ed8a-c4ae-d196eeb664ce@gmail.com
Backpatch-through: 16
|
|
WAIT FOR is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
WAIT FOR needs to wait without any snapshot held. Otherwise, the snapshot
could prevent the replay of WAL records, implying a kind of self-deadlock.
This is why separate utility command seems appears to be the most robust
way to implement this functionality. It's not possible to implement this as
a function. Previous experience shows that stored procedures also have
limitation in this aspect.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
Implement a new facility that allows processes to wait for WAL to reach
specific LSNs, both on primary (waiting for flush) and standby (waiting
for replay) servers.
The implementation uses shared memory with per-backend information
organized into pairing heaps, allowing O(1) access to the minimum
waited LSN. This enables fast-path checks: after replaying or flushing
WAL, the startup process or WAL writer can quickly determine if any
waiters need to be awakened.
Key components:
- New xlogwait.c/h module with WaitForLSNReplay() and WaitForLSNFlush()
- Separate pairing heaps for replay and flush waiters
- WaitLSN lightweight lock for coordinating shared state
- Wait events WAIT_FOR_WAL_REPLAY and WAIT_FOR_WAL_FLUSH for monitoring
This infrastructure can be used by features that need to wait for WAL
operations to complete.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
The existing pairingheap_allocate() uses palloc(), which allocates
from process-local memory. For shared memory use cases, the pairingheap
structure must be allocated via ShmemAlloc() or embedded in a shared
memory struct. Add pairingheap_initialize() to initialize an already-
allocated pairingheap structure in-place, enabling shared memory usage.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
In generate_orderedappend_paths(), the function does not handle the
case where the paths in total_subpaths and fractional_subpaths are
identical. This situation is not uncommon, and as a result, it may
generate two exactly identical ordered append paths.
Fix by checking whether total_subpaths and fractional_subpaths contain
the same paths, and skipping creation of the ordered append path for
the fractional case when they are identical.
Given the lack of field complaints about this, I'm a bit hesitant to
back-patch, but let's clean it up in HEAD.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-OYsgA75tGGiBARt87G0y_z_GBTSLrzudcJxAzndYkYw@mail.gmail.com
|
|
In generate_orderedappend_paths(), there is an assumption that a child
relation's row estimate is always greater than zero. There is an
Assert verifying this assumption, and the estimate is also used to
convert an absolute tuple count into a fraction.
However, this assumption is not always valid -- for example, upper
relations can have their row estimates unset, resulting in a value of
zero. This can cause an assertion failure in debug builds or lead to
the tuple fraction being computed as infinity in production builds.
To fix, use the row estimate from the cheapest_total path to compute
the tuple fraction. The row estimate in this path should already have
been forced to a valid value.
In passing, update the comment for generate_orderedappend_paths() to
note that the function also considers the cheapest-fractional case
when not all tuples need to be retrieved. That is, it collects all
the cheapest fractional paths and builds an ordered append path for
each interesting ordering.
Backpatch to v18, where this issue was introduced.
Bug: #19102
Reported-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Discussion: https://postgr.es/m/19102-93480667e1200169@postgresql.org
Backpatch-through: 18
|
|
The test introduced by 17b2d5ec759c verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec759c, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
|
|
This patch introduces sequence synchronization. Sequences that are synced
will have 2 states:
- INIT (needs [re]synchronizing)
- READY (is already synchronized)
A new sequencesync worker is launched as needed to synchronize sequences.
A single sequencesync worker is responsible for synchronizing all
sequences. It begins by retrieving the list of sequences that are flagged
for synchronization, i.e., those in the INIT state. These sequences are
then processed in batches, allowing multiple entries to be synchronized
within a single transaction. The worker fetches the current sequence
values and page LSNs from the remote publisher, updates the corresponding
sequences on the local subscriber, and finally marks each sequence as
READY upon successful synchronization.
Sequence synchronization occurs in 3 places:
1) CREATE SUBSCRIPTION
- The command syntax remains unchanged.
- The subscriber retrieves sequences associated with publications.
- Published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize all sequences.
2) ALTER SUBSCRIPTION ... REFRESH PUBLICATION
- The command syntax remains unchanged.
- Dropped published sequences are removed from pg_subscription_rel.
- Newly published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize only newly added
sequences.
3) ALTER SUBSCRIPTION ... REFRESH SEQUENCES
- A new command introduced for PG19 by f0b3573c3a.
- All sequences in pg_subscription_rel are reset to INIT state.
- Initiate the sequencesync worker to synchronize all sequences.
- Unlike "ALTER SUBSCRIPTION ... REFRESH PUBLICATION" command,
addition and removal of missing sequences will not be done in this
case.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
Previously, unnamed portals were kept until the next Bind message or the
end of the transaction. This could cause temporary files to persist
longer than expected and make logging not reflect the actual SQL
responsible for the temporary file.
This patch changes exec_execute_message() to drop unnamed portals
immediately after execution to completion at the end of an Execute
message, making their removal more aggressive. This forces temporary
file cleanups to happen at the same time as the completion of the portal
execution, with statement logging correctly reflecting to which
statements these temporary files were attached to (see the diffs in the
TAP test updated by this commit for an idea).
The documentation is updated to describe the lifetime of unnamed
portals, and test cases are updated to verify temporary file removal and
proper statement logging after unnamed portal execution. This changes
how unnamed portals are handled in the protocol, hence no backpatch is
done.
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Co-Authored-by: Sami Imseih <samimseih@gmail.com>
Co-Authored-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tTrTUoEr3kDXCuKsvqYGq8OOHiBwoD-dyJocq95uEOTQ%40mail.gmail.com
|
|
The comment for ChangeVarNodes() refers to a parameter named
change_RangeTblRef, which does not exist in the code.
The comment for ChangeVarNodesExtended() contains an extra space,
while the comment for replace_relid_callback() has an awkward line
break and a typo.
This patch fixes these issues and revises some sentences for smoother
wording.
Oversights in commits ab42d643c and fc069a3a6.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs480j16HC1JtjKCgj5WshivT8ZJYkOfTyZAM0POjFomJkg@mail.gmail.com
Backpatch-through: 18
|
|
These assertions may prove to become useful to make sure that no process
other than the startup process calls the routines where these checks are
added, as we expect that these do not interfere with a WAL receiver
switched to a "stopping" state by a startup process.
The assumption that only the startup process can use this code has
existed for many years, without a check enforcing it.
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/aQmGeVLYl51y1m_0@paquier.xyz
|
|
First, the assertions in assign_io_method() were the wrong way round. Second,
the lengthof() assertion checked the length of io_method_options, which is the
wrong array to check and is always longer than pgaio_method_ops_table.
While add it, add a static assert to ensure pgaio_method_ops_table and
io_method_options stay in sync.
Per coverity and Tom Lane.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 18
|
|
In 2a0faed9d702, which added JIT compilation support for expressions, I
accidentally used sizeof(LLVMBasicBlockRef *) instead of
sizeof(LLVMBasicBlockRef) as part of computing the size of an allocation. That
turns out to have no real negative consequences due to LLVMBasicBlockRef being
a pointer itself (and thus having the same size). It still is wrong and
confusing, so fix it.
Reported by coverity.
Backpatch-through: 13
|
|
Allow pg_newlocale_from_collation(C_COLLATION_OID) to work even if
there's no catalog access, which some extensions expect.
Not known to be a bug without extensions involved, but backport to 18.
Also corrects an issue in master with dummy_c_locale (introduced in
commit 5a38104b36) where deterministic was not set. That wasn't a bug,
but could have been if that structure was used more widely.
Reported-by: Alexander Kukushkin <cyberdemn@gmail.com>
Reviewed-by: Alexander Kukushkin <cyberdemn@gmail.com>
Discussion: https://postgr.es/m/CAFh8B=nj966ECv5vi_u3RYij12v0j-7NPZCXLYzNwOQp9AcPWQ@mail.gmail.com
Backpatch-through: 18
|
|
This commit adds CHECK_FOR_INTERRUPTS to the shared buffer iteration
loops in EvictRelUnpinnedBuffers and EvictAllUnpinnedBuffers. These
functions, used by pg_buffercache's pg_buffercache_evict_relation and
pg_buffercache_evict_all, can now be interrupted during long-running
operations.
Backpatch to version 18, where these functions and their corresponding
pg_buffercache functions were introduced.
Author: Yuhang Qiu <iamqyh@gmail.com>
Discussion: https://postgr.es/m/8DC280D4-94A2-4E7B-BAB9-C345891D0B78%40gmail.com
Backpatch-through: 18
|
|
03d40e4b5 allowed dummy UNION [ALL] children to be removed from the plan
by checking for is_dummy_rel(). That commit neglected to still account
for the relids from the dummy rel so that the correct UPPERREL_SETOP
RelOptInfo could be found and used for adding the Paths to.
Not doing this could result in processing of subsequent UNIONs using the
same RelOptInfo as a previously processed UNION, which could result in
add_path() freeing old Paths that are needed by the previous UNION.
The same fix was independently submitted (2 mins later) by Richard Guo.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/bee34aec-659c-46f1-9ab7-7bbae0b7616c@gmail.com
|
|
Commit a95e3d84c0e0 added ActiveSnapshot push+pop when processing
work-items (BRIN autosummarization), but forgot to handle the case of
a transaction failing during the run, which drops the snapshot untimely.
Fix by making the pop conditional on an element being actually there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511041648.nofajnuddmwk@alvherre.pgsql
|
|
The parallel GIN builds perform "freezing" of TID lists when merging
chunks built earlier. This means determining what part of the list can
no longer change, depending on the last received chunk. The frozen part
can be evicted from memory and written out.
The code attempted to freeze items right before merging the old and new
TID list, after already attempting to trim the current buffer. That
means part of the data may get frozen based on the new TID list, but
will be trimmed later (on next loop). This increases memory usage.
This inverts the order, so that we freeze data first (before trimming).
The benefits are likely relatively small, but it's also virtually free
with no other downsides.
Discussion: https://postgr.es/m/CAHLJuCWDwn-PE2BMZE4Kux7x5wWt_6RoWtA0mUQffEDLeZ6sfA@mail.gmail.com
|
|
This commit adds tab completion support for COPY TO PROGRAM and COPY
FROM PROGRAM syntax in psql.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20250605100835.b396f9d656df1018f65a4556@sraoss.co.jp
|
|
This commit enhances tab completion for both COPY FROM and COPY TO
commands to suggest STDIN and STDOUT, respectively.
To make suggesting both file names and keywords easier, it introduces
a new COMPLETE_WITH_FILES_PLUS() macro.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/20250605100835.b396f9d656df1018f65a4556@sraoss.co.jp
|
|
When building intermediate TID lists during parallel GIN builds, split
the sorted lists into smaller chunks, to limit the amount of memory
needed when merging the chunks later.
The leader may need to keep in memory up to one chunk per worker, and
possibly one extra chunk (before evicting some of the data). The code
processing item pointers uses regular palloc/repalloc calls, which means
it's subject to the MaxAllocSize (1GB) limit.
We could fix this by allowing huge allocations, but that'd require
changes in many places without much benefit. Larger chunks do not
actually improve performance, so the memory usage would be wasted.
Fixed by limiting the chunk size to not hit MaxAllocSize. Each worker
gets a fair share.
This requires remembering the number of participating workers, in a
place that can be accessed from the callback. Luckily, the bs_worker_id
field in GinBuildState was unused, so repurpose that.
Report by Greg Smith, investigation and fix by me. Batchpatched to 18,
where parallel GIN builds were introduced.
Reported-by: Gregory Smith <gregsmithpgsql@gmail.com>
Discussion: https://postgr.es/m/CAHLJuCWDwn-PE2BMZE4Kux7x5wWt_6RoWtA0mUQffEDLeZ6sfA@mail.gmail.com
Backpatch-through: 18
|
|
Reported-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2kAkNaDa01O0nKsQmkfEmxsDvm09SU=f1T0CV8ew3qJEA@mail.gmail.com
|
|
We have never had a SET syntax that allows setting a GUC_LIST_INPUT
parameter to be an empty list. A locution such as
SET search_path = '';
doesn't mean that; it means setting the GUC to contain a single item
that is an empty string. (For search_path the net effect is much the
same, because search_path ignores invalid schema names and '' must be
invalid.) This is confusing, not least because configuration-file
entries and the set_config() function can easily produce empty-list
values.
We considered making the empty-string syntax do this, but that would
foreclose ever allowing empty-string items to be valid in list GUCs.
While there isn't any obvious use-case for that today, it feels like
the kind of restriction that might hurt someday. Instead, let's
accept the forbidden-up-to-now value NULL and treat that as meaning an
empty list. (An objection to this could be "what if we someday want
to allow NULL as a GUC value?". That seems unlikely though, and even
if we did allow it for scalar GUCs, we could continue to treat it as
meaning an empty list for list GUCs.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Klychkov <andrew.a.klychkov@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CA+mfrmwsBmYsJayWjc8bJmicxc3phZcHHY=yW5aYe=P-1d_4bg@mail.gmail.com
|
|
Accidental omission in commit aa2ba50c2c13. There are too many lists of
these variables ...
Discussion: https://postgr.es/m/202511031738.eqaeaedpx5cr@alvherre.pgsql
|
|
A generated column may end up being part of the partition key
expression, if it's specified as an expression e.g. "(<generated
column name>)" or if the partition key expression contains a whole-row
reference, even though we do not allow a generated column to be part
of partition key expression. Fix this hole.
Co-authored-by: jian he <jian.universality@gmail.com>
Co-authored-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/CACJufxF%3DWDGthXSAQr9thYUsfx_1_t9E6N8tE3B8EqXcVoVfQw%40mail.gmail.com
|
|
It's possible to define BRIN indexes on functions that require a
snapshot to run, but the autosummarization feature introduced by commit
7526e10224f0 fails to provide one. This causes autovacuum to leave a
BRIN placeholder tuple behind after a failed work-item execution, making
such indexes less efficient. Repair by obtaining a snapshot prior to
running the task, and add a test to verify this behavior.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Giovanni Fabris <giovanni.fabris@icon.it>
Reported-by: Arthur Nascimento <tureba@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511031106.h4fwyuyui6fz@alvherre.pgsql
|
|
Fixup for commit ef5e60a9d35: The inconsistent use of articles was a
bit awkward.
|
|
Previously, passwordFromFile() returned NULL for valid cases (like no
matching password found) and actual errors (two out-of-memory paths).
This made it impossible for its sole caller, pqConnectOptions2(), to
distinguish between these scenarios and fail the connection
appropriately should an out-of-memory error occur.
This patch extends passwordFromFile() to be able to detect both valid
and failure cases, with an error string given back to the caller of the
function.
Out-of-memory failures unlikely happen in the field, so no backpatch is
done.
Author: Joshua Shanks <jjshanks@gmail.com>
Discussion: https://postgr.es/m/CAOxqWDfihFRmhNVdfu8epYTXQRxkCHSOrg+=-ij2c_X3gW=o3g@mail.gmail.com
|
|
We had two places defining their own constants for this.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/202510311750.mxiykx3tp4mx@alvherre.pgsql
|
|
When the startup process switches from streaming to archive as WAL
source, we avoid calling ShutdownWalRcv() if the WAL receiver is not
streaming, based on WalRcvStreaming(). WALRCV_STOPPING is a state set
by ShutdownWalRcv(), called only by the startup process, meaning that it
should not be possible to reach this state while in
WaitForWALToBecomeAvailable().
This commit adds an assertion to make sure that a WAL receiver is never
in a WALRCV_STOPPING state should the startup process attempt to reset
InstallXLogFileSegmentActive.
Idea suggested by Noah Misch.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
|
|
This has come up as useful as an alternative of WalRcvStreaming(), to be
able to do sanity checks based on the state of a WAL receiver. This
will be used in a follow-up commit.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
|
|
Commit b4f584f9d2a1 (affecting v15~, later backpatched down to 13 as of
3635a0a35aaf) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2a1: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
|
|
Author: Mikhail Nikalayeu <mihailnikalayeu@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CANtu0ojXmqjmEzp-=aJSxjsdE76iAsRgHBoK0QtYHimb_mEfsg@mail.gmail.com
Backpatch-through: 13
|
|
Author: ChangAo Chen <cca5507@qq.com>
Discussion: https://postgr.es/m/tencent_392C0E92EC52432D0A336B9D52E66426F009@qq.com
|
|
New \pset variables display_true and display_false allow the user to
change how true and false values are displayed.
Author: David G. Johnston <David.G.Johnston@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAKFQuwYts3vnfQ5AoKhEaKMTNMfJ443MW2kFswKwzn7fiofkrw@mail.gmail.com
Discussion: https://postgr.es/m/56308F56.8060908@joh.to
|
