diff options
Diffstat (limited to 'Documentation/admin-guide')
| -rw-r--r-- | Documentation/admin-guide/cgroup-v2.rst | 33 | ||||
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 5 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/dwc_pcie_pmu.rst | 4 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/fujitsu_uncore_pmu.rst | 110 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/hisi-pmu.rst | 49 | ||||
| -rw-r--r-- | Documentation/admin-guide/perf/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/xfs.rst | 69 |
7 files changed, 205 insertions, 66 deletions
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 51c0bc4c2dc5..0e6c67ac585a 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -15,6 +15,9 @@ v1 is available under :ref:`Documentation/admin-guide/cgroup-v1/index.rst <cgrou .. CONTENTS + [Whenever any new section is added to this document, please also add + an entry here.] + 1. Introduction 1-1. Terminology 1-2. What is cgroup? @@ -25,9 +28,10 @@ v1 is available under :ref:`Documentation/admin-guide/cgroup-v1/index.rst <cgrou 2-2-2. Threads 2-3. [Un]populated Notification 2-4. Controlling Controllers - 2-4-1. Enabling and Disabling - 2-4-2. Top-down Constraint - 2-4-3. No Internal Process Constraint + 2-4-1. Availability + 2-4-2. Enabling and Disabling + 2-4-3. Top-down Constraint + 2-4-4. No Internal Process Constraint 2-5. Delegation 2-5-1. Model of Delegation 2-5-2. Delegation Containment @@ -61,14 +65,15 @@ v1 is available under :ref:`Documentation/admin-guide/cgroup-v1/index.rst <cgrou 5-4-1. PID Interface Files 5-5. Cpuset 5.5-1. Cpuset Interface Files - 5-6. Device + 5-6. Device controller 5-7. RDMA 5-7-1. RDMA Interface Files 5-8. DMEM + 5-8-1. DMEM Interface Files 5-9. HugeTLB 5.9-1. HugeTLB Interface Files 5-10. Misc - 5.10-1 Miscellaneous cgroup Interface Files + 5.10-1 Misc Interface Files 5.10-2 Migration and Ownership 5-11. Others 5-11-1. perf_event @@ -1001,6 +1006,24 @@ All cgroup core files are prefixed with "cgroup." Total number of dying cgroup subsystems (e.g. memory cgroup) at and beneath the current cgroup. + cgroup.stat.local + A read-only flat-keyed file which exists in non-root cgroups. + The following entry is defined: + + frozen_usec + Cumulative time that this cgroup has spent between freezing and + thawing, regardless of whether by self or ancestor groups. + NB: (not) reaching "frozen" state is not accounted here. + + Using the following ASCII representation of a cgroup's freezer + state, :: + + 1 _____ + frozen 0 __/ \__ + ab cd + + the duration being measured is the span between a and c. + cgroup.freeze A read-write single value file which exists on non-root cgroups. Allowed values are "0" and "1". The default is "0". diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index e92c0056e4e0..a3f358fbcbfc 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -6406,8 +6406,9 @@ rodata= [KNL,EARLY] on Mark read-only kernel memory as read-only (default). off Leave read-only kernel memory writable for debugging. - full Mark read-only kernel memory and aliases as read-only - [arm64] + noalias Mark read-only kernel memory as read-only but retain + writable aliases in the direct map for regions outside + of the kernel image. [arm64] rockchip.usb_uart [EARLY] diff --git a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst index cb376f335f40..167f9281fbf5 100644 --- a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst +++ b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst @@ -16,8 +16,8 @@ provides the following two features: - one 64-bit counter for Time Based Analysis (RX/TX data throughput and time spent in each low-power LTSSM state) and -- one 32-bit counter for Event Counting (error and non-error events for - a specified lane) +- one 32-bit counter per event for Event Counting (error and non-error + events for a specified lane) Note: There is no interrupt for counter overflow. diff --git a/Documentation/admin-guide/perf/fujitsu_uncore_pmu.rst b/Documentation/admin-guide/perf/fujitsu_uncore_pmu.rst new file mode 100644 index 000000000000..46595b788d3a --- /dev/null +++ b/Documentation/admin-guide/perf/fujitsu_uncore_pmu.rst @@ -0,0 +1,110 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +================================================ +Fujitsu Uncore Performance Monitoring Unit (PMU) +================================================ + +This driver supports the Uncore MAC PMUs and the Uncore PCI PMUs found +in Fujitsu chips. +Each MAC PMU on these chips is exposed as a uncore perf PMU with device name +mac_iod<iod>_mac<mac>_ch<ch>. +And each PCI PMU on these chips is exposed as a uncore perf PMU with device name +pci_iod<iod>_pci<pci>. + +The driver provides a description of its available events and configuration +options in sysfs, see /sys/bus/event_sources/devices/mac_iod<iod>_mac<mac>_ch<ch>/ +and /sys/bus/event_sources/devices/pci_iod<iod>_pci<pci>/. +This driver exports: +- formats, used by perf user space and other tools to configure events +- events, used by perf user space and other tools to create events + symbolically, e.g.: + perf stat -a -e mac_iod0_mac0_ch0/event=0x21/ ls + perf stat -a -e pci_iod0_pci0/event=0x24/ ls +- cpumask, used by perf user space and other tools to know on which CPUs + to open the events + +This driver supports the following events for MAC: +- cycles + This event counts MAC cycles at MAC frequency. +- read-count + This event counts the number of read requests to MAC. +- read-count-request + This event counts the number of read requests including retry to MAC. +- read-count-return + This event counts the number of responses to read requests to MAC. +- read-count-request-pftgt + This event counts the number of read requests including retry with PFTGT + flag. +- read-count-request-normal + This event counts the number of read requests including retry without PFTGT + flag. +- read-count-return-pftgt-hit + This event counts the number of responses to read requests which hit the + PFTGT buffer. +- read-count-return-pftgt-miss + This event counts the number of responses to read requests which miss the + PFTGT buffer. +- read-wait + This event counts outstanding read requests issued by DDR memory controller + per cycle. +- write-count + This event counts the number of write requests to MAC (including zero write, + full write, partial write, write cancel). +- write-count-write + This event counts the number of full write requests to MAC (not including + zero write). +- write-count-pwrite + This event counts the number of partial write requests to MAC. +- memory-read-count + This event counts the number of read requests from MAC to memory. +- memory-write-count + This event counts the number of full write requests from MAC to memory. +- memory-pwrite-count + This event counts the number of partial write requests from MAC to memory. +- ea-mac + This event counts energy consumption of MAC. +- ea-memory + This event counts energy consumption of memory. +- ea-memory-mac-write + This event counts the number of write requests from MAC to memory. +- ea-ha + This event counts energy consumption of HA. + + 'ea' is the abbreviation for 'Energy Analyzer'. + +Examples for use with perf:: + + perf stat -e mac_iod0_mac0_ch0/ea-mac/ ls + +And, this driver supports the following events for PCI: +- pci-port0-cycles + This event counts PCI cycles at PCI frequency in port0. +- pci-port0-read-count + This event counts read transactions for data transfer in port0. +- pci-port0-read-count-bus + This event counts read transactions for bus usage in port0. +- pci-port0-write-count + This event counts write transactions for data transfer in port0. +- pci-port0-write-count-bus + This event counts write transactions for bus usage in port0. +- pci-port1-cycles + This event counts PCI cycles at PCI frequency in port1. +- pci-port1-read-count + This event counts read transactions for data transfer in port1. +- pci-port1-read-count-bus + This event counts read transactions for bus usage in port1. +- pci-port1-write-count + This event counts write transactions for data transfer in port1. +- pci-port1-write-count-bus + This event counts write transactions for bus usage in port1. +- ea-pci + This event counts energy consumption of PCI. + + 'ea' is the abbreviation for 'Energy Analyzer'. + +Examples for use with perf:: + + perf stat -e pci_iod0_pci0/ea-pci/ ls + +Given that these are uncore PMUs the driver does not support sampling, therefore +"perf record" will not work. Per-task perf sessions are not supported. diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst index 48992a0b8e94..c4c2cbbf88cb 100644 --- a/Documentation/admin-guide/perf/hisi-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pmu.rst @@ -18,9 +18,10 @@ HiSilicon SoC uncore PMU driver Each device PMU has separate registers for event counting, control and interrupt, and the PMU driver shall register perf PMU drivers like L3C, HHA and DDRC etc. The available events and configuration options shall -be described in the sysfs, see: +be described in the sysfs, see:: + +/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}> -/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>. The "perf list" command shall list the available events from sysfs. Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU @@ -112,6 +113,50 @@ uring channel. It is 2 bits. Some important codes are as follows: - 2'b00: default value, count the events which sent to the both uring and uring_ext channel; +6. ch: NoC PMU supports filtering the event counts of certain transaction +channel with this option. The current supported channels are as follows: + +- 3'b010: Request channel +- 3'b100: Snoop channel +- 3'b110: Response channel +- 3'b111: Data channel + +7. tt_en: NoC PMU supports counting only transactions that have tracetag set +if this option is set. See the 2nd list for more information about tracetag. + +For HiSilicon uncore PMU v3 whose identifier is 0x40, some uncore PMUs are +further divided into parts for finer granularity of tracing, each part has its +own dedicated PMU, and all such PMUs together cover the monitoring job of events +on particular uncore device. Such PMUs are described in sysfs with name format +slightly changed:: + +/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}_{Z}/ddrc{Y}_{Z}/noc{Y}_{Z}> + +Z is the sub-id, indicating different PMUs for part of hardware device. + +Usage of most PMUs with different sub-ids are identical. Specially, L3C PMU +provides ``ext`` option to allow exploration of even finer granual statistics +of L3C PMU. L3C PMU driver uses that as hint of termination when delivering +perf command to hardware: + +- ext=0: Default, could be used with event names. +- ext=1 and ext=2: Must be used with event codes, event names are not supported. + +An example of perf command could be:: + + $# perf stat -a -e hisi_sccl0_l3c1_0/rd_spipe/ sleep 5 + +or:: + + $# perf stat -a -e hisi_sccl0_l3c1_0/event=0x1,ext=1/ sleep 5 + +As above, ``hisi_sccl0_l3c1_0`` locates PMU of Super CPU CLuster 0, L3 cache 1 +pipe0. + +First command locates the first part of L3C since ``ext=0`` is implied by +default. Second command issues the counting on another part of L3C with the +event ``0x1``. + Users could configure IDs to count data come from specific CCL/ICL, by setting srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst index 072b510385c4..47d9a3df6329 100644 --- a/Documentation/admin-guide/perf/index.rst +++ b/Documentation/admin-guide/perf/index.rst @@ -29,3 +29,4 @@ Performance monitor support cxl ampere_cspmu mrvl-pem-pmu + fujitsu_uncore_pmu diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst index a18328a5fb93..c85cd327af28 100644 --- a/Documentation/admin-guide/xfs.rst +++ b/Documentation/admin-guide/xfs.rst @@ -34,22 +34,6 @@ When mounting an XFS filesystem, the following options are accepted. to the file. Specifying a fixed ``allocsize`` value turns off the dynamic behaviour. - attr2 or noattr2 - The options enable/disable an "opportunistic" improvement to - be made in the way inline extended attributes are stored - on-disk. When the new form is used for the first time when - ``attr2`` is selected (either when setting or removing extended - attributes) the on-disk superblock feature bit field will be - updated to reflect this format being in use. - - The default behaviour is determined by the on-disk feature - bit indicating that ``attr2`` behaviour is active. If either - mount option is set, then that becomes the new default used - by the filesystem. - - CRC enabled filesystems always use the ``attr2`` format, and so - will reject the ``noattr2`` mount option if it is set. - discard or nodiscard (default) Enable/disable the issuing of commands to let the block device reclaim space freed by the filesystem. This is @@ -75,12 +59,6 @@ When mounting an XFS filesystem, the following options are accepted. across the entire filesystem rather than just on directories configured to use it. - ikeep or noikeep (default) - When ``ikeep`` is specified, XFS does not delete empty inode - clusters and keeps them around on disk. When ``noikeep`` is - specified, empty inode clusters are returned to the free - space pool. - inode32 or inode64 (default) When ``inode32`` is specified, it indicates that XFS limits inode creation to locations which will not result in inode @@ -253,9 +231,8 @@ latest version and try again. The deprecation will take place in two parts. Support for mounting V4 filesystems can now be disabled at kernel build time via Kconfig option. -The option will default to yes until September 2025, at which time it -will be changed to default to no. In September 2030, support will be -removed from the codebase entirely. +These options were changed to default to no in September 2025. In +September 2030, support will be removed from the codebase entirely. Note: Distributors may choose to withdraw V4 format support earlier than the dates listed above. @@ -268,8 +245,6 @@ Deprecated Mount Options ============================ ================ Mounting with V4 filesystem September 2030 Mounting ascii-ci filesystem September 2030 -ikeep/noikeep September 2025 -attr2/noattr2 September 2025 ============================ ================ @@ -285,6 +260,8 @@ Removed Mount Options osyncisdsync/osyncisosync v4.0 barrier v4.19 nobarrier v4.19 + ikeep/noikeep v6.18 + attr2/noattr2 v6.18 =========================== ======= sysctls @@ -312,9 +289,6 @@ The following sysctls are available for the XFS filesystem: removes unused preallocation from clean inodes and releases the unused space back to the free pool. - fs.xfs.speculative_cow_prealloc_lifetime - This is an alias for speculative_prealloc_lifetime. - fs.xfs.error_level (Min: 0 Default: 3 Max: 11) A volume knob for error reporting when internal errors occur. This will generate detailed messages & backtraces for filesystem @@ -341,17 +315,6 @@ The following sysctls are available for the XFS filesystem: This option is intended for debugging only. - fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1) - Controls whether symlinks are created with mode 0777 (default) - or whether their mode is affected by the umask (irix mode). - - fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1) - Controls files created in SGID directories. - If the group ID of the new file does not match the effective group - ID or one of the supplementary group IDs of the parent dir, the - ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl - is set. - fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1) Setting this to "1" will cause the "sync" flag set by the **xfs_io(8)** chattr command on a directory to be @@ -387,24 +350,20 @@ The following sysctls are available for the XFS filesystem: Deprecated Sysctls ================== -=========================================== ================ - Name Removal Schedule -=========================================== ================ -fs.xfs.irix_sgid_inherit September 2025 -fs.xfs.irix_symlink_mode September 2025 -fs.xfs.speculative_cow_prealloc_lifetime September 2025 -=========================================== ================ - +None currently. Removed Sysctls =============== -============================= ======= - Name Removed -============================= ======= - fs.xfs.xfsbufd_centisec v4.0 - fs.xfs.age_buffer_centisecs v4.0 -============================= ======= +========================================== ======= + Name Removed +========================================== ======= + fs.xfs.xfsbufd_centisec v4.0 + fs.xfs.age_buffer_centisecs v4.0 + fs.xfs.irix_symlink_mode v6.18 + fs.xfs.irix_sgid_inherit v6.18 + fs.xfs.speculative_cow_prealloc_lifetime v6.18 +========================================== ======= Error handling ============== |