diff options
Diffstat (limited to 'arch/arm/boot/dts')
232 files changed, 6857 insertions, 4218 deletions
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index d799ad153b37..f71392a55df8 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -182,6 +182,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-wits-pro-a20-dkt.dtb # Enables support for device-tree overlays for all pis +DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@ DTC_FLAGS_sun8i-h3-orangepi-lite := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@ DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@ @@ -199,6 +200,7 @@ DTC_FLAGS_sun8i-h3-nanopi-r1 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@ +DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@ DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ @@ -225,6 +227,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h2-plus-libretech-all-h3-cc.dtb \ sun8i-h2-plus-orangepi-r1.dtb \ sun8i-h2-plus-orangepi-zero.dtb \ + sun8i-h2-plus-orangepi-zero-interface-board.dtb \ sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-bananapi-m2-plus-v1.2.dtb \ sun8i-h3-beelink-x2.dtb \ @@ -244,6 +247,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus.dtb \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ + sun8i-h3-orangepi-zero-plus2-interface-board.dtb \ sun8i-h3-rervision-dvk.dtb \ sun8i-h3-zeropi.dtb \ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ @@ -257,6 +261,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t113s-mangopi-mq-r-t113.dtb \ + sun8i-t113s-netcube-nagami-basic-carrier.dtb \ + sun8i-t113s-netcube-nagami-keypad-carrier.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-anbernic-rg-nano.dtb \ @@ -264,6 +270,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v3s-netcube-kumquat.dtb \ sun8i-v40-bananapi-m2-berry.dtb +sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \ + sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo +sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \ + sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts index 83d283cf6633..d425d9ee83db 100644 --- a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts @@ -218,7 +218,7 @@ &usbphy { usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts index 1b001f2ad0ef..b23cec5b89eb 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts @@ -112,6 +112,20 @@ }; }; +/* + * Audio input/output is exposed on the 13-pin header and can't be used for + * anything else. However, adapter boards may use different audio routing. + * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port + * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics + */ +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "disabled"; +}; + &cpu0 { cpu-supply = <®_vdd_cpux>; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts index 7a6444a10e25..97a3565ac7a8 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts @@ -99,6 +99,20 @@ }; }; +/* + * Audio input/output is exposed on the 13-pin header and can't be used for + * anything else. However, adapter boards may use different audio routing. + * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html + * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics + */ +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "disabled"; +}; + &de { status = "okay"; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso new file mode 100644 index 000000000000..e137eefee341 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net> + * + * Devicetree overlay for the Orange Pi Zero Interface board (OP0014). + * + * https://orangepi.com/index.php?route=product/product&product_id=871 + * + * This overlay applies to the following base files: + * + * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts + * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts + */ + +/dts-v1/; +/plugin/; + +&codec { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi index 272584881bb2..a0f787581dd9 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi @@ -82,7 +82,7 @@ }; &ehci0 { - status = "okay"; + status = "okay"; }; &mmc1 { diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi index fa162f7fa9f0..f0ed802a9d08 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi @@ -705,7 +705,7 @@ }; /omit-if-no-ref/ - uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{ + uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts new file mode 100644 index 000000000000..5262102a85f6 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s-netcube-nagami.dtsi" + +/ { + model = "NetCube Systems Nagami Basic Carrier Board"; + compatible = "netcube,nagami-basic-carrier", "netcube,nagami", + "allwinner,sun8i-t113s"; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + broken-cd; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts new file mode 100644 index 000000000000..4ffa6a0216d8 --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s-netcube-nagami.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "NetCube Systems Nagami Keypad Carrier Board"; + compatible = "netcube,nagami-keypad-carrier", "netcube,nagami", + "allwinner,sun8i-t113s"; + + leds { + compatible = "gpio-leds"; + + led_status_red: led-status-red { + gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>; /* PD16 */ + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + }; + + led_status_green: led-status-green { + gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>; /* PD22 */ + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + }; + }; +}; + +&i2c2 { + status = "okay"; + + tca8418: keypad@34 { + compatible = "ti,tca8418"; + reg = <0x34>; + interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>; /* PF6 */ + linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A) + MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1) + MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2) + MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3) + MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B) + MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4) + MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5) + MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6) + MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C) + MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7) + MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8) + MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9) + MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D) + MATRIX_KEY(0x00, 0x01, KEY_CLEAR) + MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0) + MATRIX_KEY(0x00, 0x03, KEY_OK) + >; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + }; +}; + +&pio { + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PB + "", "", "UART3_TX", "UART3_RX", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "eMMC_CLK", "eMMC_CMD", // PC + "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "USB_SEC_EN", "", "", + "", "", "", "", + "LED_STATUS_RED", "", "", "", + "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "", + "", "", "", "", + "", "", "", "", + "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE + "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "", + "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PF + "", "", "KEY_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD", + "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi new file mode 100644 index 000000000000..544d60cfc32e --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NetCube Systems Nagami SoM"; + compatible = "netcube,nagami", "allwinner,sun8i-t113s"; + + aliases { + serial1 = &uart1; // ESP32 Bootloader UART + serial3 = &uart3; // Console UART on Card Edge + ethernet0 = &emac; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + /* module wide 3.3V supply directly from the card edge */ + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */ + reg_vcc_core: regulator-core { + compatible = "regulator-fixed"; + regulator-name = "vcc-core"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + vin-supply = <®_vcc3v3>; + }; + + /* USB0 MUX to switch connect to Card-Edge only after BootROM */ + usb0_sec_mux: mux-controller{ + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */ + idle-state = <1>; /* USB connected to Card-Edge by default */ + }; + + /* Reset of ESP32 */ + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */ + post-power-on-delay-ms = <1500>; + power-off-delay-us = <200>; + }; +}; + +&cpu0 { + cpu-supply = <®_vcc_core>; +}; + +&cpu1 { + cpu-supply = <®_vcc_core>; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&emac { + nvmem-cells = <ð0_macaddress>; + nvmem-cell-names = "mac-address"; + phy-handle = <&lan8720a>; + phy-mode = "rmii"; + pinctrl-0 = <&rmii_pe_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Default I2C Interface on Card-Edge */ +&i2c2 { + pinctrl-0 = <&i2c2_pd_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +/* Exposed as the QWIIC connector and used by the internal EEPROM */ +&i2c3 { + pinctrl-0 = <&i2c3_pg_pins>; + pinctrl-names = "default"; + status = "okay"; + + eeprom0: eeprom@50 { + compatible = "atmel,24c02"; /* actually it's a 24AA02E48 */ + reg = <0x50>; + pagesize = <16>; + read-only; + vcc-supply = <®_vcc3v3>; + + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@fa { + reg = <0xfa 0x06>; + }; + }; +}; + +/* Default I2S Interface on Card-Edge */ +&i2s1 { + pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>; + pinctrl-names = "default"; + status = "disabled"; +}; + +/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */ +&mdio { + lan8720a: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +/* Default SD Interface on Card-Edge */ +&mmc0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +/* Connected to the on-board ESP32 */ +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; +}; + +/* Connected to the on-board eMMC */ +&mmc2 { + pinctrl-0 = <&mmc2_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pd-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; + + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "CAN0_TX", "CAN0_RX", // PB + "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "eMMC_CLK", "eMMC_CMD", // PC + "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK", + "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP", + "PD16", "", "", "", + "I2C2_SCL", "I2C2_SDA", "PD22", "", + "", "", "", "", + "", "", "", "", + "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE + "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "", + "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF + "SD_D3", "SD_D2", "PF6", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD", + "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA", + "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* Remove the unused CK pin from the pinctl as it is unconnected */ +&rmii_pe_pins { + pins = "PE0", "PE1", "PE2", "PE3", "PE4", + "PE5", "PE6", "PE8", "PE9"; +}; + +/* Default SPI Interface on Card-Edge */ +&spi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>; + pinctrl-names = "default"; + cs-gpios = <0>; + status = "disabled"; +}; + +/* Connected to the Bootloader/Console of the ESP32 */ +&uart1 { + pinctrl-0 = <&uart1_pg6_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +/* Console/Debug UART on Card-Edge */ +&uart3 { + pinctrl-0 = <&uart3_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts index 5143cb4e7b78..cb6292319f39 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts @@ -29,7 +29,7 @@ clk_can0: clock-can0 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <40000000>; + clock-frequency = <40000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index aba7451ab749..0f0b5b707654 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -19,8 +19,11 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-delta-ahe50dc.dtb \ aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-catalina.dtb \ + aspeed-bmc-facebook-clemente.dtb \ aspeed-bmc-facebook-cmm.dtb \ + aspeed-bmc-facebook-darwin.dtb \ aspeed-bmc-facebook-elbert.dtb \ + aspeed-bmc-facebook-fuji-data64.dtb \ aspeed-bmc-facebook-fuji.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ aspeed-bmc-facebook-greatlakes.dtb \ @@ -31,6 +34,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-tiogapass.dtb \ aspeed-bmc-facebook-wedge40.dtb \ aspeed-bmc-facebook-wedge100.dtb \ + aspeed-bmc-facebook-wedge400-data64.dtb \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts index c435359a4bd9..53b4372f1a08 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts @@ -243,7 +243,7 @@ compatible = "ti,tmp75"; reg = <0x49>; }; - temperature-sensor@4a{ + temperature-sensor@4a { compatible = "ti,tmp75"; reg = <0x4a>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts index 9605ccade155..b550a48f48f0 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -171,7 +171,7 @@ reg = <0x50>; }; dps650ab@58 { - compatible = "dps650ab"; + compatible = "delta,dps650ab"; reg = <0x58>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts index 93190f4e696c..3ebd80db06f9 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts @@ -106,11 +106,15 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x57>; pagesize = <16>; - #address-cells = <1>; - #size-cells = <1>; - eth0_macaddress: macaddress@3f80 { - reg = <0x3f80 6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts index 9d00ce9475f2..8c57a071f488 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts @@ -191,11 +191,15 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x57>; pagesize = <16>; - #address-cells = <1>; - #size-cells = <1>; - eth0_macaddress: macaddress@3f80 { - reg = <0x3f80 6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts index 6dd221644dc6..e306655ce4a3 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts @@ -134,11 +134,15 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x50>; pagesize = <16>; - #address-cells = <1>; - #size-cells = <1>; - eth0_macaddress: macaddress@3f80 { - reg = <0x3f80 6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts index 0943e0bf1305..e61a6cb43438 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts @@ -232,15 +232,19 @@ compatible = "st,24c128", "atmel,24c128"; reg = <0x57>; pagesize = <16>; - #address-cells = <1>; - #size-cells = <1>; - eth0_macaddress: macaddress@3f80 { - reg = <0x3f80 6>; - }; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eth0_macaddress: macaddress@3f80 { + reg = <0x3f80 6>; + }; - eth1_macaddress: macaddress@3f88 { - reg = <0x3f88 6>; + eth1_macaddress: macaddress@3f88 { + reg = <0x3f88 6>; + }; }; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts index 8d786510167f..14dd0ab64130 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts @@ -526,11 +526,11 @@ tach-ch = /bits/ 8 <0x03>; }; }; - fanctl0: fan-controller@21{ + fanctl0: fan-controller@21 { compatible = "maxim,max31790"; reg = <0x21>; }; - fanctl1: fan-controller@27{ + fanctl1: fan-controller@27 { compatible = "maxim,max31790"; reg = <0x27>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts new file mode 100644 index 000000000000..ecef44d89977 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts @@ -0,0 +1,1283 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/usb/pd.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Clemente BMC"; + compatible = "facebook,clemente-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + i2c16 = &i2c1mux0ch0; + i2c17 = &i2c1mux0ch1; + i2c18 = &i2c1mux0ch2; + i2c19 = &i2c1mux0ch3; + i2c20 = &i2c1mux0ch4; + i2c21 = &i2c1mux0ch5; + i2c22 = &i2c1mux0ch6; + i2c23 = &i2c1mux0ch7; + i2c24 = &i2c0mux0ch0; + i2c25 = &i2c0mux0ch1; + i2c26 = &i2c0mux0ch2; + i2c27 = &i2c0mux0ch3; + i2c28 = &i2c0mux1ch0; + i2c29 = &i2c0mux1ch1; + i2c30 = &i2c0mux1ch2; + i2c31 = &i2c0mux1ch3; + i2c32 = &i2c0mux2ch0; + i2c33 = &i2c0mux2ch1; + i2c34 = &i2c0mux2ch2; + i2c35 = &i2c0mux2ch3; + i2c36 = &i2c0mux3ch0; + i2c37 = &i2c0mux3ch1; + i2c38 = &i2c0mux3ch2; + i2c39 = &i2c0mux3ch3; + i2c40 = &i2c0mux4ch0; + i2c41 = &i2c0mux4ch1; + i2c42 = &i2c0mux4ch2; + i2c43 = &i2c0mux4ch3; + i2c44 = &i2c0mux5ch0; + i2c45 = &i2c0mux5ch1; + i2c46 = &i2c0mux5ch2; + i2c47 = &i2c0mux5ch3; + i2c48 = &i2c0mux0ch1mux0ch0; + i2c49 = &i2c0mux0ch1mux0ch1; + i2c50 = &i2c0mux0ch1mux0ch2; + i2c51 = &i2c0mux0ch1mux0ch3; + i2c52 = &i2c0mux3ch1mux0ch0; + i2c53 = &i2c0mux3ch1mux0ch1; + i2c54 = &i2c0mux3ch1mux0ch2; + i2c55 = &i2c0mux3ch1mux0ch3; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + + led-3 { + label = "bmc_ready_cpld_noled"; + gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + p1v8_bmc_aux: regulator-p1v8-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p1v8_bmc_aux"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + p2v5_bmc_aux: regulator-p2v5-bmc-aux { + compatible = "regulator-fixed"; + regulator-name = "p2v5_bmc_aux"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; + }; + }; + + spi1_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&adc0 { + vref-supply = <&p1v8_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref-supply = <&p2v5_bmc_aux>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; +}; + +&ehci0 { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N", + "BMC_I2C1_FPGA_ALERT_L","BMC_READY", + "IOEXP_INT_L","FM_ID_LED", + "","", + /*C0-C7*/ "BMC_GPIOC0","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N", + "","BMC_I2C_SSIF_ALERT_L", + /*D0-D7*/ "","","","","BMC_GPIOD4","","","", + /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","", + "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN", + "SHDN_FORCE_L","SHDN_REQ_L", + "","","","", + /*I0-I7*/ "","","","", + "","FLASH_WP_STATUS", + "FM_PDB_HEALTH_N","RUN_POWER_PG", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP", + "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN", + "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","", + /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1", + "LED_POSTCODE_2","LED_POSTCODE_3", + "LED_POSTCODE_4","LED_POSTCODE_5", + "LED_POSTCODE_6","LED_POSTCODE_7", + /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC", + "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N", + "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N", + "","USBDBG_IPMI_EN_L", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L", + "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N", + "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N", + "UART_MUX_SEL","I2C_MUX_RESET_L", + "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L", + /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L", + "CPU_BOOT_DONE","PMBUS_GNT_L", + "CHASSIS_PWR_BRK_L","PCIE_WAKE_L", + "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N", + "SYS_FAULT_LED_N","RUN_POWER_FAULT_L", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L", + "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L", + "SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT_L","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","RST_BMC_SELF_HW", + "FM_FLASH_LATCH_N","BMC_EMMC_RST_N", + "BMC_GPIOY4","BMC_GPIOY5","","", + /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7"; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B3*/ "","","","", + /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","",""; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // HDD FRU EEPROM + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + // E1.S Backplane + i2c0mux0ch1mux0: i2c-mux@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux0ch1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux0ch1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c0mux0ch1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux0ch1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + i2c0mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux1ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux1ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 0 IOEXP + io_expander7: gpio@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "RST_CX7_0", + "RST_CX7_1", + "CX0_SSD0_PRSNT_L", + "CX1_SSD1_PRSNT_L", + "CX_BOOT_CMPLT_CX0", + "CX_BOOT_CMPLT_CX1", + "CX_TWARN_CX0_L", + "CX_TWARN_CX1_L", + "CX_OVT_SHDN_CX0", + "CX_OVT_SHDN_CX1", + "FNP_L_CX0", + "FNP_L_CX1", + "", + "MCU_GPIO", + "MCU_RST_N", + "MCU_RECOVERY_N"; + }; + + // IO Mezz 0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // OSFP 0 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + }; + + i2c0mux1ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux1ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9546"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux2ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + // IOB0 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + i2c0mux2ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c0mux2ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux2ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + // IOB0 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + }; + + i2c-mux@75 { + compatible = "nxp,pca9546"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux3ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // E1.S Backplane HDD FRU EEPROM + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + // E1.S Backplane MUX + i2c0mux3ch1mux0: i2c-mux@74 { + compatible = "nxp,pca9546"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux3ch1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux3ch1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c0mux3ch1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux3ch1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + i2c0mux3ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux3ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux4ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c0mux4ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + // IO Mezz 1 IOEXP + io_expander8: gpio@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SEC_RST_CX7_0", + "SEC_RST_CX7_1", + "SEC_CX0_SSD0_PRSNT_L", + "SEC_CX1_SSD1_PRSNT_L", + "SEC_CX_BOOT_CMPLT_CX0", + "SEC_CX_BOOT_CMPLT_CX1", + "SEC_CX_TWARN_CX0_L", + "SEC_CX_TWARN_CX1_L", + "SEC_CX_OVT_SHDN_CX0", + "SEC_CX_OVT_SHDN_CX1", + "SEC_FNP_L_CX0", + "SEC_FNP_L_CX1", + "", + "SEC_MCU_GPIO", + "SEC_MCU_RST_N", + "SEC_MCU_RECOVERY_N"; + }; + + // IO Mezz 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // OSFP 1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + }; + + i2c0mux4ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux4ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c0mux5ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + // IOB1 NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + i2c0mux5ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c0mux5ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0mux5ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + // IOB1 NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + // PDB + power-monitor@12 { + compatible = "ti,lm5066i"; + reg = <0x12>; + }; + + // PDB + power-monitor@14 { + compatible = "ti,lm5066i"; + reg = <0x14>; + }; + + // Module 0 + fanctl0: fan-controller@20{ + compatible = "maxim,max31790"; + reg = <0x20>; + }; + + // Module 0 + fanctl1: fan-controller@23{ + compatible = "maxim,max31790"; + reg = <0x23>; + }; + + // Module 1 + fanctl2: fan-controller@2c{ + compatible = "maxim,max31790"; + reg = <0x2c>; + }; + + // Module 1 + fanctl3: fan-controller@2f{ + compatible = "maxim,max31790"; + reg = <0x2f>; + }; + + // Module 0 Leak Sensor + adc@34 { + compatible = "maxim,max1363"; + reg = <0x34>; + }; + + // Module 1 Leak Sensor + adc@35 { + compatible = "maxim,max1363"; + reg = <0x35>; + }; + + // PDB TEMP SENSOR + temperature-sensor@4e { + compatible = "ti,tmp1075"; + reg = <0x4e>; + }; + + // PDB FRU EEPROM + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + // PDB + vrm@60 { + compatible = "renesas,raa228004"; + reg = <0x60>; + }; + + // PDB + vrm@61 { + compatible = "renesas,raa228004"; + reg = <0x61>; + }; + + // Interposer + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c1mux0ch0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + i2c1mux0ch1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + + i2c1mux0ch2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + + i2c1mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + i2c1mux0ch4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + i2c1mux0ch5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + + // Interposer TEMP SENSOR + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + // Interposer FRU EEPROM + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + }; + + i2c1mux0ch6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + + // Interposer IOEXP + io_expander5: gpio@27 { + compatible = "nxp,pca9554"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "JTAG_MUX_SEL", + "IOX_BMC_RESET", + "RTC_CLR_L", + "RTC_U77_ALRT_N", + "", + "PSU_ALERT_N", + "", + "RST_P12V_STBY_N"; + }; + }; + + i2c1mux0ch7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + + // FIO TEMP SENSOR + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + // FIO FRU EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + // Module 0, Expander @0x20 + io_expander0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "FPGA_THERM_OVERT_L-I", + "FPGA_READY_BMC-I", + "HMC_BMC_DETECT-O", + "HMC_PGOOD-O", + "", + "BMC_STBY_CYCLE-O", + "FPGA_EROT_FATAL_ERROR_L-I", + "WP_HW_EXT_CTRL_L-O", + "EROT_FPGA_RST_L-O", + "FPGA_EROT_RECOVERY_L-O", + "BMC_EROT_FPGA_SPI_MUX_SEL-O", + "USB2_HUB_RST_L-O", + "", + "SGPIO_EN_L-O", + "B2B_IOEXP_INT_L-I", + "I2C_BUS_MUX_RESET_L-O"; + }; + + // Module 1, Expander @0x21 + io_expander1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SEC_FPGA_THERM_OVERT_L", + "SEC_FPGA_READY_BMC", + "SEC_HMC_BMC_DETECT", + "SEC_HMC_PGOOD", + "", + "SEC_BMC_SELF_POWER_CYCLE", + "SEC_SEC_FPGA_EROT_FATAL_ERROR_L", + "SEC_WP_HW_EXT_CTRL_L", + "SEC_EROT_FPGA_RST_L", + "SEC_FPGA_EROT_RECOVERY_L", + "SEC_BMC_EROT_FPGA_SPI_MUX_SEL", + "SEC_USB2_HUB_RST_L", + "", + "SEC_SGPIO_EN_L", + "SEC_IOB_IOEXP_INT_L", + "SEC_I2C_BUS_MUX_RESET_L"; + }; + + // HMC Expander @0x27 + io_expander2: gpio@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "HMC_PRSNT_L-I", + "HMC_READY-I", + "HMC_EROT_FATAL_ERROR_L-I", + "I2C_MUX_SEL-O", + "HMC_EROT_SPI_MUX_SEL-O", + "HMC_EROT_RECOVERY_L-O", + "HMC_EROT_RST_L-O", + "GLOBAL_WP_HMC-O", + "FPGA_RST_L-O", + "USB2_HUB_RST-O", + "CPU_UART_MUX_SEL-O", + "", + "", + "", + "", + ""; + }; + + // Module 0 Aux EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // Module 1 Aux EEPROM + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + io_expander3: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "RTC_MUX_SEL", + "PCI_MUX_SEL", + "TPM_MUX_SEL", + "FAN_MUX-SEL", + "SGMII_MUX_SEL", + "DP_MUX_SEL", + "UPHY3_USB_SEL", + "NCSI_MUX_SEL", + "BMC_PHY_RST", + "RTC_CLR_L", + "BMC_12V_CTRL", + "PS_RUN_IO0_PG", + "", + "", + "", + ""; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; + // SCM TEMP SENSOR BOARD + temperature-sensor@4b { + compatible = "national,lm75b"; + reg = <0x4b>; + }; + + // SCM CPLD IOEXP + io_expander4: gpio@4f { + compatible = "nxp,pca9555"; + reg = <0x4f>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "stby_power_en_cpld", + "stby_power_gd_cpld", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + }; + + // SCM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // BSM FRU EEPROM + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +&i2c10 { + status = "okay"; + multi-master; + mctp-controller; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + // OCP NIC0 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC0 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c11 { + status = "okay"; + + ssif-bmc@10 { + compatible = "ssif-bmc"; + reg = <0x10>; + }; +}; + +&i2c12 { + status = "okay"; + multi-master; + + // HPM 1 FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + // CBC 2 FRU + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + // CBC 3 FRU + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; +}; + +&i2c13 { + status = "okay"; + multi-master; + + // HPM FRU EEPROM + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + // CBC 0 FRU + eeprom@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + }; + + // CBC 1 FRU + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + // HMC FRU EEPROM + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; +}; + +&i2c14 { + status = "okay"; + + // PDB CPLD IOEXP 0x10 + io_expander9: gpio@10 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x10>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "wSequence_Latch_State_N", + "wP12V_N1N2_RUNTIME_FLT_N", + "wP12V_FAN_RUNTIME_FLT_N", + "wP12V_AUX_RUNTIME_FLT_N", + "wHost_PERST_SEQPWR_FLT_N", + "wP12V_N1N2_SEQPWR_FLT_N", + "wP12V_FAN_SEQPWR_FLT_N", + "wP12V_AUX_SEQPWR_FLT_N", + "wP12V_RUNTIME_FLT_NIC1_N", + "wAUX_RUNTIME_FLT_NIC1_N", + "wP12V_SEQPWR_FLT_NIC1_N", + "wAUX_SEQPWR_FLT_NIC1_N", + "wP12V_RUNTIME_FLT_NIC0_N", + "wAUX_RUNTIME_FLT_NIC0_N", + "wP12V_SEQPWR_FLT_NIC0_N", + "wAUX_SEQPWR_FLT_NIC0_N"; + }; + + // PDB CPLD IOEXP 0x11 + io_expander10: gpio@11 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x11>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "FM_P12V_NIC1_FLTB_R_N", + "FM_P3V3_NIC1_FAULT_R_N", + "FM_P12V_NIC0_FLTB_R_N", + "FM_P3V3_NIC0_FAULT_R_N", + "P48V_HS2_FAULT_N_PLD", + "P48V_HS1_FAULT_N_PLD", + "P12V_AUX_FAN_OC_PLD_N", + "P12V_AUX_FAN_FAULT_PLD_N", + "", + "", + "", + "", + "", + "FM_SYS_THROTTLE_N", + "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N", + "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N"; + }; + + // PDB CPLD IOEXP 0x12 + io_expander11: gpio@12 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x12>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "P12V_AUX_PSU_SMB_ALERT_R_L", + "P12V_SCM_SENSE_ALERT_R_N", + "P12V_AUX_NIC1_SENSE_ALERT_R_N", + "P12V_AUX_NIC0_SENSE_ALERT_R_N", + "NODEB_PSU_SMB_ALERT_R_L", + "NODEA_PSU_SMB_ALERT_R_L", + "P12V_AUX_FAN_ALERT_PLD_N", + "P52V_SENSE_ALERT_PLD_N", + "PRSNT_RJ45_FIO_N_R", + "FM_MAIN_PWREN_RMC_EN_ISO_R", + "CHASSIS3_LEAK_Q_N_PLD", + "CHASSIS2_LEAK_Q_N_PLD", + "CHASSIS1_LEAK_Q_N_PLD", + "CHASSIS0_LEAK_Q_N_PLD", + "", + "SMB_RJ45_FIO_TMP_ALERT"; + }; + + // PDB CPLD IOEXP 0x13 + io_expander12: gpio@13 { + compatible = "nxp,pca9555"; + interrupt-parent = <&gpio0>; + interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + reg = <0x13>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "FAN_7_PRESENT_N", + "FAN_6_PRESENT_N", + "FAN_5_PRESENT_N", + "FAN_4_PRESENT_N", + "FAN_3_PRESENT_N", + "FAN_2_PRESENT_N", + "FAN_1_PRESENT_N", + "FAN_0_PRESENT_N", + "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N", + "HP_LVC3_OCP_V3_1_PRSNT2_PLD_N", + "PRSNT_HDDBD_POWER_CABLE_N", + "PRSNT_OSFP0_POWER_CABLE_N", + "PRSNT_CHASSIS3_LEAK_CABLE_R_N", + "PRSNT_CHASSIS2_LEAK_CABLE_R_N", + "PRSNT_CHASSIS1_LEAK_CABLE_R_N", + "PRSNT_CHASSIS0_LEAK_CABLE_R_N"; + }; + + // PDB CPLD IOEXP 0x14 + io_expander13: gpio@14 { + compatible = "nxp,pca9555"; + reg = <0x14>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "rmc_en_dc_pwr_on", + "", + "", + "", + "", + "", + "", + "", + "leak_config_0", + "leak_config_1", + "leak_config_2", + "leak_config_3", + "mfg_led_test_mode_l", + "small_leak_err_inj", + "large_leak_err_inj", + ""; + }; +}; + +&i2c15 { + status = "okay"; + multi-master; + mctp-controller; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + // OCP NIC1 TEMP + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + // OCP NIC1 FRU EEPROM + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi4_default>; + use-ncsi; +}; + +&udma { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts new file mode 100644 index 000000000000..58c107a1b6cf --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. + +/dts-v1/; + +#include "ast2600-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Darwin BMC"; + compatible = "facebook,darwin-bmc", "aspeed,ast2600"; + + aliases { + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart5; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + spi_gpio: spi { + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>; + }; +}; + +&i2c0 { + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; +}; + +&adc0 { + status = "okay"; + + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + status = "okay"; + + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + + non-removable; + max-frequency = <25000000>; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts index 74f3c67e0eff..ff1009ea1c49 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts @@ -201,3 +201,15 @@ full-duplex; }; }; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + + non-removable; + max-frequency = <25000000>; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts new file mode 100644 index 000000000000..aa9576d8ab56 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts @@ -0,0 +1,1256 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "ast2600-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Fuji BMC (64MB Datastore)"; + compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600"; + + aliases { + /* + * PCA9548 (2-0070) provides 8 channels connecting to + * SCM (System Controller Module). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * PCA9548 (8-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * PCA9548 (11-0077) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c40 = &imux40; + i2c41 = &imux41; + i2c42 = &imux42; + i2c43 = &imux43; + i2c44 = &imux44; + i2c45 = &imux45; + i2c46 = &imux46; + i2c47 = &imux47; + + /* + * PCA9548 (24-0071) provides 8 channels connecting to + * PDB-Left. + */ + i2c48 = &imux48; + i2c49 = &imux49; + i2c50 = &imux50; + i2c51 = &imux51; + i2c52 = &imux52; + i2c53 = &imux53; + i2c54 = &imux54; + i2c55 = &imux55; + + /* + * PCA9548 (25-0072) provides 8 channels connecting to + * PDB-Right. + */ + i2c56 = &imux56; + i2c57 = &imux57; + i2c58 = &imux58; + i2c59 = &imux59; + i2c60 = &imux60; + i2c61 = &imux61; + i2c62 = &imux62; + i2c63 = &imux63; + + /* + * PCA9548 (26-0076) provides 8 channels connecting to + * FCM1. + */ + i2c64 = &imux64; + i2c65 = &imux65; + i2c66 = &imux66; + i2c67 = &imux67; + i2c68 = &imux68; + i2c69 = &imux69; + i2c70 = &imux70; + i2c71 = &imux71; + + /* + * PCA9548 (27-0076) provides 8 channels connecting to + * FCM2. + */ + i2c72 = &imux72; + i2c73 = &imux73; + i2c74 = &imux74; + i2c75 = &imux75; + i2c76 = &imux76; + i2c77 = &imux77; + i2c78 = &imux78; + i2c79 = &imux79; + + /* + * PCA9548 (40-0076) provides 8 channels connecting to + * PIM1. + */ + i2c80 = &imux80; + i2c81 = &imux81; + i2c82 = &imux82; + i2c83 = &imux83; + i2c84 = &imux84; + i2c85 = &imux85; + i2c86 = &imux86; + i2c87 = &imux87; + + /* + * PCA9548 (41-0076) provides 8 channels connecting to + * PIM2. + */ + i2c88 = &imux88; + i2c89 = &imux89; + i2c90 = &imux90; + i2c91 = &imux91; + i2c92 = &imux92; + i2c93 = &imux93; + i2c94 = &imux94; + i2c95 = &imux95; + + /* + * PCA9548 (42-0076) provides 8 channels connecting to + * PIM3. + */ + i2c96 = &imux96; + i2c97 = &imux97; + i2c98 = &imux98; + i2c99 = &imux99; + i2c100 = &imux100; + i2c101 = &imux101; + i2c102 = &imux102; + i2c103 = &imux103; + + /* + * PCA9548 (43-0076) provides 8 channels connecting to + * PIM4. + */ + i2c104 = &imux104; + i2c105 = &imux105; + i2c106 = &imux106; + i2c107 = &imux107; + i2c108 = &imux108; + i2c109 = &imux109; + i2c110 = &imux110; + i2c111 = &imux111; + + /* + * PCA9548 (44-0076) provides 8 channels connecting to + * PIM5. + */ + i2c112 = &imux112; + i2c113 = &imux113; + i2c114 = &imux114; + i2c115 = &imux115; + i2c116 = &imux116; + i2c117 = &imux117; + i2c118 = &imux118; + i2c119 = &imux119; + + /* + * PCA9548 (45-0076) provides 8 channels connecting to + * PIM6. + */ + i2c120 = &imux120; + i2c121 = &imux121; + i2c122 = &imux122; + i2c123 = &imux123; + i2c124 = &imux124; + i2c125 = &imux125; + i2c126 = &imux126; + i2c127 = &imux127; + + /* + * PCA9548 (46-0076) provides 8 channels connecting to + * PIM7. + */ + i2c128 = &imux128; + i2c129 = &imux129; + i2c130 = &imux130; + i2c131 = &imux131; + i2c132 = &imux132; + i2c133 = &imux133; + i2c134 = &imux134; + i2c135 = &imux135; + + /* + * PCA9548 (47-0076) provides 8 channels connecting to + * PIM8. + */ + i2c136 = &imux136; + i2c137 = &imux137; + i2c138 = &imux138; + i2c139 = &imux139; + i2c140 = &imux140; + i2c141 = &imux141; + i2c142 = &imux142; + i2c143 = &imux143; + }; + + spi_gpio: spi { + num-chipselects = <3>; + cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, + <0>, /* device reg=<1> does not exist */ + <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>; + + eeprom@2 { + compatible = "atmel,at93c46d"; + spi-max-frequency = <250000>; + data-size = <16>; + spi-cs-high; + reg = <2>; + }; + }; +}; + +&fmc { + flash@0 { + /delete-node/partitions; +#include "facebook-bmc-flash-layout-128-data64.dtsi" + }; +}; + +&i2c0 { + multi-master; + bus-frequency = <1000000>; +}; + +&i2c2 { + /* + * PCA9548 (2-0070) provides 8 channels connecting to SCM (System + * Controller Module). + */ + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + shunt-resistor-micro-ohms = <1500>; + }; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c8 { + /* + * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch + * Main Board). + */ + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + imux48: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux49: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux50: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + lp5012@14 { + compatible = "ti,lp5012"; + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "sys"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "fan"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "psu"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + + multi-led@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_ACTIVITY; + label = "smb"; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; + }; + }; + + imux51: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux52: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux53: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux54: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux55: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + i2c-mux@72 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + imux56: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux57: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux58: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux59: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux60: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux61: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux62: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux63: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux64: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux65: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux66: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux67: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + shunt-resistor-micro-ohms = <250>; + }; + }; + + imux68: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux69: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux70: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux71: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux72: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux73: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux74: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux75: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + shunt-resistor-micro-ohms = <250>; + }; + }; + + imux76: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux77: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux78: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux79: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c11 { + status = "okay"; + + /* + * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch + * Main Board). + */ + i2c-mux@77 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + i2c-mux-idle-disconnect; + + imux40: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux80: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux81: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux82: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux83: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux84: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux85: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux86: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux87: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux41: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux88: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux89: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux90: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux91: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux92: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux93: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux94: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux95: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux42: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux96: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux97: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux98: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux99: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux100: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux101: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux102: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux103: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux43: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux104: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux105: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux106: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux107: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux108: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux109: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux110: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux111: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux44: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux112: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux113: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux114: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux115: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux116: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux117: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux118: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux119: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux45: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux120: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux121: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux122: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux123: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux124: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux125: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux126: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux127: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux46: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux129: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux132: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux133: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux134: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux135: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + imux47: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux136: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux137: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux138: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux139: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux140: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux141: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux142: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux143: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + }; + + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mdio1 { + status = "okay"; + + ethphy3: ethernet-phy@13 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0d>; + }; +}; + +&emmc_controller { + status = "okay"; +}; + +&emmc { + status = "okay"; + + non-removable; + max-frequency = <25000000>; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts index f23c26a3441d..5dc2a165e441 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts @@ -1,1251 +1,16 @@ // SPDX-License-Identifier: GPL-2.0+ // Copyright (c) 2020 Facebook Inc. -/dts-v1/; - -#include <dt-bindings/leds/common.h> -#include "ast2600-facebook-netbmc-common.dtsi" +#include "aspeed-bmc-facebook-fuji-data64.dts" / { model = "Facebook Fuji BMC"; compatible = "facebook,fuji-bmc", "aspeed,ast2600"; - - aliases { - /* - * PCA9548 (2-0070) provides 8 channels connecting to - * SCM (System Controller Module). - */ - i2c16 = &imux16; - i2c17 = &imux17; - i2c18 = &imux18; - i2c19 = &imux19; - i2c20 = &imux20; - i2c21 = &imux21; - i2c22 = &imux22; - i2c23 = &imux23; - - /* - * PCA9548 (8-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; - i2c28 = &imux28; - i2c29 = &imux29; - i2c30 = &imux30; - i2c31 = &imux31; - - /* - * PCA9548 (11-0077) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c40 = &imux40; - i2c41 = &imux41; - i2c42 = &imux42; - i2c43 = &imux43; - i2c44 = &imux44; - i2c45 = &imux45; - i2c46 = &imux46; - i2c47 = &imux47; - - /* - * PCA9548 (24-0071) provides 8 channels connecting to - * PDB-Left. - */ - i2c48 = &imux48; - i2c49 = &imux49; - i2c50 = &imux50; - i2c51 = &imux51; - i2c52 = &imux52; - i2c53 = &imux53; - i2c54 = &imux54; - i2c55 = &imux55; - - /* - * PCA9548 (25-0072) provides 8 channels connecting to - * PDB-Right. - */ - i2c56 = &imux56; - i2c57 = &imux57; - i2c58 = &imux58; - i2c59 = &imux59; - i2c60 = &imux60; - i2c61 = &imux61; - i2c62 = &imux62; - i2c63 = &imux63; - - /* - * PCA9548 (26-0076) provides 8 channels connecting to - * FCM1. - */ - i2c64 = &imux64; - i2c65 = &imux65; - i2c66 = &imux66; - i2c67 = &imux67; - i2c68 = &imux68; - i2c69 = &imux69; - i2c70 = &imux70; - i2c71 = &imux71; - - /* - * PCA9548 (27-0076) provides 8 channels connecting to - * FCM2. - */ - i2c72 = &imux72; - i2c73 = &imux73; - i2c74 = &imux74; - i2c75 = &imux75; - i2c76 = &imux76; - i2c77 = &imux77; - i2c78 = &imux78; - i2c79 = &imux79; - - /* - * PCA9548 (40-0076) provides 8 channels connecting to - * PIM1. - */ - i2c80 = &imux80; - i2c81 = &imux81; - i2c82 = &imux82; - i2c83 = &imux83; - i2c84 = &imux84; - i2c85 = &imux85; - i2c86 = &imux86; - i2c87 = &imux87; - - /* - * PCA9548 (41-0076) provides 8 channels connecting to - * PIM2. - */ - i2c88 = &imux88; - i2c89 = &imux89; - i2c90 = &imux90; - i2c91 = &imux91; - i2c92 = &imux92; - i2c93 = &imux93; - i2c94 = &imux94; - i2c95 = &imux95; - - /* - * PCA9548 (42-0076) provides 8 channels connecting to - * PIM3. - */ - i2c96 = &imux96; - i2c97 = &imux97; - i2c98 = &imux98; - i2c99 = &imux99; - i2c100 = &imux100; - i2c101 = &imux101; - i2c102 = &imux102; - i2c103 = &imux103; - - /* - * PCA9548 (43-0076) provides 8 channels connecting to - * PIM4. - */ - i2c104 = &imux104; - i2c105 = &imux105; - i2c106 = &imux106; - i2c107 = &imux107; - i2c108 = &imux108; - i2c109 = &imux109; - i2c110 = &imux110; - i2c111 = &imux111; - - /* - * PCA9548 (44-0076) provides 8 channels connecting to - * PIM5. - */ - i2c112 = &imux112; - i2c113 = &imux113; - i2c114 = &imux114; - i2c115 = &imux115; - i2c116 = &imux116; - i2c117 = &imux117; - i2c118 = &imux118; - i2c119 = &imux119; - - /* - * PCA9548 (45-0076) provides 8 channels connecting to - * PIM6. - */ - i2c120 = &imux120; - i2c121 = &imux121; - i2c122 = &imux122; - i2c123 = &imux123; - i2c124 = &imux124; - i2c125 = &imux125; - i2c126 = &imux126; - i2c127 = &imux127; - - /* - * PCA9548 (46-0076) provides 8 channels connecting to - * PIM7. - */ - i2c128 = &imux128; - i2c129 = &imux129; - i2c130 = &imux130; - i2c131 = &imux131; - i2c132 = &imux132; - i2c133 = &imux133; - i2c134 = &imux134; - i2c135 = &imux135; - - /* - * PCA9548 (47-0076) provides 8 channels connecting to - * PIM8. - */ - i2c136 = &imux136; - i2c137 = &imux137; - i2c138 = &imux138; - i2c139 = &imux139; - i2c140 = &imux140; - i2c141 = &imux141; - i2c142 = &imux142; - i2c143 = &imux143; - }; - - spi_gpio: spi { - num-chipselects = <3>; - cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>, - <0>, /* device reg=<1> does not exist */ - <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>; - - eeprom@2 { - compatible = "atmel,at93c46d"; - spi-max-frequency = <250000>; - data-size = <16>; - spi-cs-high; - reg = <2>; - }; - }; }; -&i2c0 { - multi-master; - bus-frequency = <1000000>; -}; - -&i2c2 { - /* - * PCA9548 (2-0070) provides 8 channels connecting to SCM (System - * Controller Module). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux16: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - adm1278@10 { - compatible = "adi,adm1278"; - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - shunt-resistor-micro-ohms = <1500>; - }; - }; - - imux17: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux18: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux19: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux20: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux21: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux22: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux23: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c8 { - /* - * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - i2c-mux@71 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - i2c-mux-idle-disconnect; - - imux48: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux49: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux50: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - lp5012@14 { - compatible = "ti,lp5012"; - reg = <0x14>; - #address-cells = <1>; - #size-cells = <0>; - - multi-led@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "sys"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "fan"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "psu"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - - multi-led@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - color = <LED_COLOR_ID_MULTI>; - function = LED_FUNCTION_ACTIVITY; - label = "smb"; - - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - }; - - led@2 { - reg = <2>; - color = <LED_COLOR_ID_GREEN>; - }; - }; - }; - }; - - imux51: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux52: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux53: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux54: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux55: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - i2c-mux@72 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - i2c-mux-idle-disconnect; - - imux56: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux57: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux58: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux59: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux60: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux61: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux62: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux63: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux64: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux65: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux66: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux67: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - adm1278@10 { - compatible = "adi,adm1278"; - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - shunt-resistor-micro-ohms = <250>; - }; - }; - - imux68: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux69: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux70: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux71: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux72: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux73: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux74: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux75: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - adm1278@10 { - compatible = "adi,adm1278"; - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - shunt-resistor-micro-ohms = <250>; - }; - }; - - imux76: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux77: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux78: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux79: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux28: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux29: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux30: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux31: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - +&fmc { + flash@0 { + /delete-node/partitions; +#include "facebook-bmc-flash-layout-128.dtsi" }; }; - -&i2c11 { - status = "okay"; - - /* - * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch - * Main Board). - */ - i2c-mux@77 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x77>; - i2c-mux-idle-disconnect; - - imux40: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux80: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux81: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux82: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux83: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux84: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux85: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux86: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux87: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux41: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux88: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux89: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux90: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux91: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux92: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux93: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux94: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux95: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux42: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux96: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux97: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux98: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux99: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux100: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux101: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux102: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux103: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux43: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux104: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux105: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux106: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux107: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux108: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux109: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux110: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux111: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux44: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux112: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux113: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux114: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux115: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux116: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux117: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux118: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux119: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux45: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux120: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux121: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux122: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux123: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux124: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux125: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux126: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux127: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux46: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux128: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux129: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux130: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux131: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux132: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux133: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux134: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux135: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - imux47: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux136: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux137: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux138: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux139: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux140: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux141: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux142: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux143: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - - }; - - }; -}; - -&ehci1 { - status = "okay"; -}; - -&mdio1 { - status = "okay"; - - ethphy3: ethernet-phy@13 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0d>; - }; -}; - -&mac3 { - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <ðphy3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii4_default>; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index b9a93f23bd0a..b733efe31e8d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -183,11 +183,9 @@ &i2c0 { status = "okay"; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -234,7 +232,7 @@ "","", "","", "","", - "","fcb1-activate", + "","fcb2-activate", "",""; }; }; @@ -257,11 +255,9 @@ &i2c2 { status = "okay"; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -308,7 +304,7 @@ "","", "","", "","", - "","fcb0-activate", + "","fcb1-activate", "",""; }; }; @@ -373,6 +369,12 @@ compatible = "infineon,xdp710"; reg = <0x40>; }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <500>; + }; }; &i2c5 { @@ -514,6 +516,10 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + power-sensor@20 { + compatible = "mps,mp5990"; + reg = <0x20>; + }; power-monitor@61 { compatible = "isil,isl69260"; reg = <0x61>; @@ -692,14 +698,14 @@ "","", /*A4-A7 line 8-15*/ "","power-config-asic-module-enable", - "","power-config-asic-power-good", - "","power-config-pdb-power-good", + "power-p3v3-standby","power-config-asic-power-good", + "power-p1v8-good","power-config-pdb-power-good", "presence-cpu","smi-control-n", /*B0-B3 line 16-23*/ "","nmi-control-n", - "","nmi-control-sync-flood-n", - "","", + "power-pvdd33-s5","nmi-control-sync-flood-n", "","", + "power-pvdd18-s5","", /*B4-B7 line 24-31*/ "","FM_CPU_SP5R1", "reset-cause-rsmrst","FM_CPU_SP5R2", @@ -743,7 +749,7 @@ /*F4-F7 line 88-95*/ "presence-asic-modules-0","rt-cpu0-p1-force-enable", "presence-asic-modules-1","bios-debug-msg-disable", - "","uart-control-buffer-select", + "power-asic-good","uart-control-buffer-select", "presence-cmm","ac-control-n", /*G0-G3 line 96-103*/ "FM_CPU_CORETYPE2","", @@ -795,7 +801,7 @@ "asic0-card-type-detection2-n","", "uart-switch-lsb","", "uart-switch-msb","", - "","", + "power-12v-memory-good","", /*M4-M7 line 200-207*/ "","","","","","","","", /*N0-N3 line 208-215*/ @@ -803,7 +809,10 @@ /*N4-N7 line 216-223*/ "","","","","","","","", /*O0-O3 line 224-231*/ - "","","","","","","","", + "","", + "irq-pvddcore0-ocp-alert","", + "irq-pvddcore1-ocp-alert","", + "","", /*O4-O7 line 232-239*/ "","","","","","","","", /*P0-P3 line 240-247*/ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts index ef96b17becb2..eb8d4b95596c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts @@ -312,11 +312,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -435,11 +433,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -558,11 +554,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -681,11 +675,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -804,11 +796,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { @@ -926,11 +916,9 @@ reg = <0x50>; }; - pwm@5e{ - compatible = "max31790"; + pwm@5e { + compatible = "maxim,max31790"; reg = <0x5e>; - #address-cells = <1>; - #size-cells = <0>; }; power-sensor@40 { diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts index ee93a971c500..72c84f31bdf6 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts @@ -233,7 +233,7 @@ "FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R"; }; - fan-controller@21{ + fan-controller@21 { compatible = "maxim,max31790"; reg = <0x21>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts index 704ee684e0fb..5d4c7d979f1e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts @@ -508,7 +508,7 @@ status = "okay"; //HSC, AirMax Conn A adm1278@45 { - compatible = "adm1275"; + compatible = "adi,adm1275"; reg = <0x45>; shunt-resistor-micro-ohms = <250>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts new file mode 100644 index 000000000000..1d46eaee8656 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2019 Facebook Inc. +/dts-v1/; + +#include <dt-bindings/gpio/aspeed-gpio.h> +#include "ast2500-facebook-netbmc-common.dtsi" + +/ { + model = "Facebook Wedge 400 BMC (64MB Datastore)"; + compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500"; + + aliases { + /* + * PCA9548 (2-0070) provides 8 channels connecting to + * SCM (System Controller Module). + */ + i2c16 = &imux16; + i2c17 = &imux17; + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + i2c23 = &imux23; + + /* + * PCA9548 (8-0070) provides 8 channels connecting to + * SMB (Switch Main Board). + */ + i2c24 = &imux24; + i2c25 = &imux25; + i2c26 = &imux26; + i2c27 = &imux27; + i2c28 = &imux28; + i2c29 = &imux29; + i2c30 = &imux30; + i2c31 = &imux31; + + /* + * PCA9548 (11-0076) provides 8 channels connecting to + * FCM (Fan Controller Module). + */ + i2c32 = &imux32; + i2c33 = &imux33; + i2c34 = &imux34; + i2c35 = &imux35; + i2c36 = &imux36; + i2c37 = &imux37; + i2c38 = &imux38; + i2c39 = &imux39; + + spi2 = &spi_gpio; + }; + + chosen { + stdout-path = &uart1; + }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>; + }; + + /* + * GPIO-based SPI Master is required to access SPI TPM, because + * full-duplex SPI transactions are not supported by ASPEED SPI + * Controllers. + */ + spi_gpio: spi { + status = "okay"; + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>; + sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +/* + * Both firmware flashes are 128MB on Wedge400 BMC. + */ +&fmc_flash0 { +#include "facebook-bmc-flash-layout-128-data64.dtsi" +}; + +&fmc_flash1 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + flash1@0 { + reg = <0x0 0x8000000>; + label = "flash1"; + }; + }; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* + * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC + * communication. + */ +&i2c0 { + status = "okay"; + multi-master; + bus-frequency = <1000000>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux24: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux25: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux26: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux27: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux28: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux29: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux30: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux31: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + i2c-mux@76 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + imux32: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + imux33: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + imux34: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux35: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux36: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux37: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux38: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + imux39: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&sdhci1 { + max-frequency = <25000000>; + /* + * DMA mode needs to be disabled to avoid conflicts with UHCI + * Controller in AST2500 SoC. + */ + sdhci-caps-mask = <0x0 0x580000>; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts index 5a8169bbda87..ef0cfc51cda4 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts @@ -1,376 +1,14 @@ // SPDX-License-Identifier: GPL-2.0+ // Copyright (c) 2019 Facebook Inc. -/dts-v1/; -#include <dt-bindings/gpio/aspeed-gpio.h> -#include "ast2500-facebook-netbmc-common.dtsi" +#include "aspeed-bmc-facebook-wedge400-data64.dts" / { model = "Facebook Wedge 400 BMC"; compatible = "facebook,wedge400-bmc", "aspeed,ast2500"; - - aliases { - /* - * PCA9548 (2-0070) provides 8 channels connecting to - * SCM (System Controller Module). - */ - i2c16 = &imux16; - i2c17 = &imux17; - i2c18 = &imux18; - i2c19 = &imux19; - i2c20 = &imux20; - i2c21 = &imux21; - i2c22 = &imux22; - i2c23 = &imux23; - - /* - * PCA9548 (8-0070) provides 8 channels connecting to - * SMB (Switch Main Board). - */ - i2c24 = &imux24; - i2c25 = &imux25; - i2c26 = &imux26; - i2c27 = &imux27; - i2c28 = &imux28; - i2c29 = &imux29; - i2c30 = &imux30; - i2c31 = &imux31; - - /* - * PCA9548 (11-0076) provides 8 channels connecting to - * FCM (Fan Controller Module). - */ - i2c32 = &imux32; - i2c33 = &imux33; - i2c34 = &imux34; - i2c35 = &imux35; - i2c36 = &imux36; - i2c37 = &imux37; - i2c38 = &imux38; - i2c39 = &imux39; - - spi2 = &spi_gpio; - }; - - chosen { - stdout-path = &uart1; - bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; - }; - - ast-adc-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, - <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>; - }; - - /* - * GPIO-based SPI Master is required to access SPI TPM, because - * full-duplex SPI transactions are not supported by ASPEED SPI - * Controllers. - */ - spi_gpio: spi { - status = "okay"; - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>; - gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - - tpm@0 { - compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; - spi-max-frequency = <33000000>; - reg = <0>; - }; - }; }; -/* - * Both firmware flashes are 128MB on Wedge400 BMC. - */ &fmc_flash0 { + /delete-node/partitions; #include "facebook-bmc-flash-layout-128.dtsi" }; - -&fmc_flash1 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - flash1@0 { - reg = <0x0 0x8000000>; - label = "flash1"; - }; - }; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd2_default - &pinctrl_rxd2_default>; -}; - -&uart4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_txd4_default - &pinctrl_rxd4_default>; -}; - -/* - * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC - * communication. - */ -&i2c0 { - status = "okay"; - multi-master; - bus-frequency = <1000000>; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux16: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux17: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux18: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux19: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux20: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux21: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux22: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux23: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c3 { - status = "okay"; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; -}; - -&i2c8 { - status = "okay"; - - i2c-mux@70 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - i2c-mux-idle-disconnect; - - imux24: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux25: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux26: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux27: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux28: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux29: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux30: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux31: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - - }; -}; - -&i2c9 { - status = "okay"; -}; - -&i2c10 { - status = "okay"; -}; - -&i2c11 { - status = "okay"; - - i2c-mux@76 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x76>; - i2c-mux-idle-disconnect; - - imux32: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - imux33: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - imux34: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - imux35: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - imux36: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - imux37: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - imux38: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - imux39: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - - }; -}; - -&i2c12 { - status = "okay"; -}; - -&i2c13 { - status = "okay"; -}; - -&adc { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&uhci { - status = "okay"; -}; - -&sdhci1 { - max-frequency = <25000000>; - /* - * DMA mode needs to be disabled to avoid conflicts with UHCI - * Controller in AST2500 SoC. - */ - sdhci-caps-mask = <0x0 0x580000>; -}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index aae789854c52..60b98d602e80 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -1186,19 +1186,19 @@ ti,mode = /bits/ 8 <1>; }; - pwm@20{ + pwm@20 { compatible = "maxim,max31790"; reg = <0x20>; }; - gpio@22{ + gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; #gpio-cells = <2>; }; - pwm@2f{ + pwm@2f { compatible = "maxim,max31790"; reg = <0x2f>; }; @@ -1234,19 +1234,19 @@ ti,mode = /bits/ 8 <1>; }; - pwm@20{ + pwm@20 { compatible = "maxim,max31790"; reg = <0x20>; }; - gpio@22{ + gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; gpio-controller; #gpio-cells = <2>; }; - pwm@2f{ + pwm@2f { compatible = "maxim,max31790"; reg = <0x2f>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts index 4d9e2cd11f44..9f144f527f03 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts @@ -2808,6 +2808,7 @@ #size-cells = <0>; cfam4_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -2824,6 +2825,7 @@ }; cfam4_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -2840,8 +2842,8 @@ }; cfam4_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -2857,8 +2859,8 @@ }; cfam4_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3181,6 +3183,7 @@ #size-cells = <0>; cfam5_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -3197,6 +3200,7 @@ }; cfam5_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -3213,8 +3217,8 @@ }; cfam5_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3230,8 +3234,8 @@ }; cfam5_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3554,6 +3558,7 @@ #size-cells = <0>; cfam6_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -3570,6 +3575,7 @@ }; cfam6_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -3586,8 +3592,8 @@ }; cfam6_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3603,8 +3609,8 @@ }; cfam6_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3927,6 +3933,7 @@ #size-cells = <0>; cfam7_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -3943,6 +3950,7 @@ }; cfam7_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -3959,8 +3967,8 @@ }; cfam7_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -3976,8 +3984,8 @@ }; cfam7_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts index 757421bc3605..c5fb5d410001 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts @@ -263,7 +263,7 @@ reg = <0x51>; }; - tca_pres1: tca9554@20{ + tca_pres1: tca9554@20 { compatible = "ti,tca9554"; reg = <0x20>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts index 8d98be3d5f2e..dbadba8eb698 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts @@ -3778,10 +3778,10 @@ pinctrl-0 = <&U65200_pins>; pinctrl-names = "default"; U65200_pins: cfg-pins { - pins = "gp60", "gp61", "gp62", - "gp63", "gp64", "gp65", "gp66", - "gp67", "gp70", "gp71", "gp72", - "gp73", "gp74", "gp75", "gp76", "gp77"; + pins = "gp60", "gp61", "gp62", "gp63", "gp64", + "gp65", "gp66", "gp67", "gp70", "gp71", + "gp72", "gp73", "gp74", "gp75", "gp76", + "gp77"; function = "gpio"; input-enable; bias-pull-up; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts index 78a5656ef75d..79c6919b3570 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts @@ -54,10 +54,9 @@ }; fsi: gpio-fsi { - compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + compatible = "aspeed,ast2500-cf-fsi-master"; #address-cells = <2>; #size-cells = <0>; - no-gpio-delays; memory-region = <&coldfire_memory>; aspeed,sram = <&sram>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts index de61eac54585..fdcf4492fb4e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts @@ -151,7 +151,7 @@ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; -&adc{ +&adc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0_default @@ -211,7 +211,7 @@ status = "okay"; bus-frequency = <90000>; HotSwap@10 { - compatible = "adm1272"; + compatible = "adi,adm1272"; reg = <0x10>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts index 41e3e9dd85f5..4de38613b0ea 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts @@ -126,6 +126,17 @@ gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>; }; }; + + standby_power_regulator: standby-power-regulator { + status = "okay"; + compatible = "regulator-fixed"; + regulator-name = "standby_power"; + gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + }; }; // Enable Primary flash on FMC for bring up activity @@ -216,6 +227,30 @@ status = "okay"; }; +&mdio0 { + status = "okay"; + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mdio3 { + status = "okay"; + ethphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + phy-mode = "rgmii-id"; + phy-handle = <ðphy3>; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + &mac2 { status = "okay"; phy-mode = "rmii"; @@ -247,7 +282,7 @@ }; &sgpiom0 { - status="okay"; + status = "okay"; ngpios = <128>; gpio-line-names = "","", @@ -411,7 +446,7 @@ // I2C4 &i2c3 { - status = "disabled"; + status = "okay"; }; // I2C5 @@ -431,6 +466,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "RTC_MUX_SEL-O", "PCI_MUX_SEL-O", @@ -464,6 +500,7 @@ #size-cells = <0>; reg = <0x71>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux16: i2c@0 { #address-cells = <1>; @@ -528,6 +565,7 @@ #size-cells = <0>; reg = <0x72>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux20: i2c@0 { #address-cells = <1>; @@ -545,6 +583,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "RST_CX_0_L-O", "RST_CX_1_L-O", @@ -584,6 +623,7 @@ #size-cells = <0>; reg = <0x73>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux24: i2c@0 { #address-cells = <1>; @@ -602,6 +642,7 @@ #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; i2c25mux0: i2c@0 { #address-cells = <1>; @@ -648,6 +689,7 @@ #size-cells = <0>; reg = <0x75>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux28: i2c@0 { #address-cells = <1>; @@ -712,6 +754,7 @@ #size-cells = <0>; reg = <0x76>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux32: i2c@0 { #address-cells = <1>; @@ -729,6 +772,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "SEC_RST_CX_0_L-O", "SEC_RST_CX_1_L-O", @@ -768,6 +812,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; imux36: i2c@0 { #address-cells = <1>; @@ -862,6 +907,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "FPGA_THERM_OVERT_L-I", "FPGA_READY_BMC-I", @@ -891,6 +937,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "SEC_FPGA_THERM_OVERT_L-I", "SEC_FPGA_READY_BMC-I", @@ -949,6 +996,7 @@ #interrupt-cells = <2>; interrupt-parent = <&gpio1>; interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <&standby_power_regulator>; gpio-line-names = "IOB_PRSNT_L", "IOB_DP_HPD", @@ -1014,6 +1062,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; e1si2c0: i2c@0 { #address-cells = <1>; @@ -1054,6 +1103,7 @@ #size-cells = <0>; reg = <0x77>; i2c-mux-idle-disconnect; + vdd-supply = <&standby_power_regulator>; e1si2c4: i2c@0 { #address-cells = <1>; @@ -1100,7 +1150,7 @@ /*J0-J7*/ "", "", "", "", "", "", "", "", /*K0-K7*/ "", "", "", "", "", "", "", "", /*L0-L7*/ "", "", "", "", "", "", "", "", - /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O", + /*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O", "STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "", /*N0-N7*/ "", "", "", "", "", "", "", "", /*O0-O7*/ "", "", "", "", "", "", "", "", diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts index 65b2208f5a90..9f2ad551255d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts @@ -63,7 +63,7 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "fsi-master-gpio"; #address-cells = <2>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts index 31ff19ef87a0..6c8b966ffccc 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts @@ -165,7 +165,7 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "fsi-master-gpio"; #address-cells = <2>; #size-cells = <0>; no-gpio-delays; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts index 1a7c61750d0d..ce6d30ddf07c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts @@ -77,10 +77,9 @@ }; fsi: gpio-fsi { - compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + compatible = "aspeed,ast2500-cf-fsi-master"; #address-cells = <2>; #size-cells = <0>; - no-gpio-delays; memory-region = <&coldfire_memory>; aspeed,sram = <&sram>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts index 123da82c04d5..7953059a6c67 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts @@ -55,7 +55,7 @@ }; fsi: gpio-fsi { - compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master"; + compatible = "aspeed,ast2400-cf-fsi-master"; #address-cells = <2>; #size-cells = <0>; @@ -151,7 +151,7 @@ }; rtc@68 { - compatible = "dallas,ds3231"; + compatible = "maxim,ds3231"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts index e6b383f6e977..a0263d969e51 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts @@ -68,10 +68,9 @@ }; fsi: gpio-fsi { - compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + compatible = "aspeed,ast2500-cf-fsi-master"; #address-cells = <2>; #size-cells = <0>; - no-gpio-delays; memory-region = <&coldfire_memory>; aspeed,sram = <&sram>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts index 8b1e82c8cdfe..89907b628b65 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts @@ -173,7 +173,7 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "fsi-master-gpio"; #address-cells = <2>; #size-cells = <0>; no-gpio-delays; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts index 6ac7b0aa6e54..af3a9d39d277 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts @@ -64,7 +64,7 @@ linux,code = <ASPEED_GPIO(F, 7)>; }; - event-pcie-e2b-present{ + event-pcie-e2b-present { label = "pcie-e2b-present"; gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(E, 7)>; @@ -96,7 +96,7 @@ }; fsi: gpio-fsi { - compatible = "fsi-master-gpio", "fsi-master"; + compatible = "fsi-master-gpio"; #address-cells = <2>; #size-cells = <0>; no-gpio-delays; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts index fd361cf073c2..86451227847b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts @@ -509,7 +509,7 @@ reg = <1>; cpu0_pvccin@60 { - compatible = "isil,raa229004"; + compatible = "renesas,raa229004"; reg = <0x60>; }; @@ -530,7 +530,7 @@ reg = <2>; cpu1_pvccin@72 { - compatible = "isil,raa229004"; + compatible = "renesas,raa229004"; reg = <0x72>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi index 16815eede710..8c953e3a1d41 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi @@ -30,7 +30,7 @@ reusable; }; - ramoops@9eff0000{ + ramoops@9eff0000 { compatible = "ramoops"; reg = <0x9eff0000 0x10000>; record-size = <0x2000>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 78c967812492..c3d4d916c69b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -356,7 +356,6 @@ lpc: lpc@1e789000 { compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; - reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index 57a699a7c149..39500bdb4747 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -273,7 +273,6 @@ gfx: display@1e6e6000 { compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; resets = <&syscon ASPEED_RESET_CRT1>; syscon = <&syscon>; @@ -441,7 +440,6 @@ lpc: lpc@1e789000 { compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; - reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi index 289668f051eb..e87c4b58994a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi @@ -412,6 +412,16 @@ groups = "MDIO4"; }; + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; + + pinctrl_ncsi4_default: ncsi4_default { + function = "RMII4"; + groups = "NCSI4"; + }; + pinctrl_ncts1_default: ncts1_default { function = "NCTS1"; groups = "NCTS1"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 8ed715bd53aa..f8662c8ac089 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -382,7 +382,6 @@ gfx: display@1e6e6000 { compatible = "aspeed,ast2600-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; - reg-io-width = <4>; clocks = <&syscon ASPEED_CLK_GATE_D1CLK>; resets = <&syscon ASPEED_RESET_GRAPHICS>; syscon = <&syscon>; @@ -572,7 +571,6 @@ lpc: lpc@1e789000 { compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; - reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; @@ -662,7 +660,7 @@ status = "disabled"; sdhci0: sdhci@1e740100 { - compatible = "aspeed,ast2600-sdhci", "sdhci"; + compatible = "aspeed,ast2600-sdhci"; reg = <0x100 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; sdhci,auto-cmd12; @@ -671,7 +669,7 @@ }; sdhci1: sdhci@1e740200 { - compatible = "aspeed,ast2600-sdhci", "sdhci"; + compatible = "aspeed,ast2600-sdhci"; reg = <0x200 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; sdhci,auto-cmd12; @@ -847,7 +845,7 @@ fsim0: fsi@1e79b000 { #interrupt-cells = <1>; - compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + compatible = "aspeed,ast2600-fsi-master"; reg = <0x1e79b000 0x94>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -859,7 +857,7 @@ fsim1: fsi@1e79b100 { #interrupt-cells = <1>; - compatible = "aspeed,ast2600-fsi-master", "fsi-master"; + compatible = "aspeed,ast2600-fsi-master"; reg = <0x1e79b100 0x94>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi index 00e5887c926f..0ef225acddfc 100644 --- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi +++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi @@ -31,9 +31,13 @@ #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + /* + * chipselect pins are defined in platform .dts files + * separately. + */ + sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>; tpm@0 { compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; @@ -152,18 +156,6 @@ status = "okay"; }; -&emmc_controller { - status = "okay"; -}; - -&emmc { - status = "okay"; - - non-removable; - max-frequency = <25000000>; - bus-width = <4>; -}; - &rtc { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi new file mode 100644 index 000000000000..efd92232cda2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2020 Facebook Inc. + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * u-boot partition: 896KB. + */ + u-boot@0 { + reg = <0x0 0xe0000>; + label = "u-boot"; + }; + + /* + * u-boot environment variables: 64KB. + */ + u-boot-env@e0000 { + reg = <0xe0000 0x10000>; + label = "env"; + }; + + /* + * image metadata partition (64KB), used by Facebook internal + * tools. + */ + image-meta@f0000 { + reg = <0xf0000 0x10000>; + label = "meta"; + }; + + /* + * FIT image: 63 MB. + */ + fit@100000 { + reg = <0x100000 0x3f00000>; + label = "fit"; + }; + + /* + * "data0" partition (64MB) is used by Facebook BMC platforms as + * persistent data store. + */ + data0@4000000 { + reg = <0x4000000 0x4000000>; + label = "data0"; + }; + + /* + * Although the master partition can be created by enabling + * MTD_PARTITIONED_MASTER option, below "flash0" partition is + * explicitly created to avoid breaking legacy applications. + */ + flash0@0 { + reg = <0x0 0x8000000>; + label = "flash0"; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi index 07ce3b2bc62a..06fac236773f 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi @@ -82,6 +82,7 @@ #size-cells = <0>; cfam0_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -98,6 +99,7 @@ }; cfam0_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -114,8 +116,8 @@ }; cfam0_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -131,8 +133,8 @@ }; cfam0_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -249,6 +251,7 @@ #size-cells = <0>; cfam1_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -265,6 +268,7 @@ }; cfam1_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -281,8 +285,8 @@ }; cfam1_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -298,8 +302,8 @@ }; cfam1_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi index 57494c744b5d..9501f66d0030 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi @@ -733,6 +733,7 @@ #size-cells = <0>; cfam2_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -749,6 +750,7 @@ }; cfam2_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -765,8 +767,8 @@ }; cfam2_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -782,8 +784,8 @@ }; cfam2_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -1106,6 +1108,7 @@ #size-cells = <0>; cfam3_spi0: spi@0 { + compatible = "ibm,spi-fsi"; reg = <0x0>; #address-cells = <1>; #size-cells = <0>; @@ -1122,6 +1125,7 @@ }; cfam3_spi1: spi@20 { + compatible = "ibm,spi-fsi"; reg = <0x20>; #address-cells = <1>; #size-cells = <0>; @@ -1138,8 +1142,8 @@ }; cfam3_spi2: spi@40 { + compatible = "ibm,spi-fsi"; reg = <0x40>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; @@ -1155,8 +1159,8 @@ }; cfam3_spi3: spi@60 { + compatible = "ibm,spi-fsi"; reg = <0x60>; - compatible = "ibm,fsi2spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile index 71062ff9adbe..2552e11b5e31 100644 --- a/arch/arm/boot/dts/broadcom/Makefile +++ b/arch/arm/boot/dts/broadcom/Makefile @@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ + bcm4708-buffalo-wxr-1750dhp.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-buffalo-wzr-1166dhp.dtb \ bcm4708-buffalo-wzr-1166dhp2.dtb \ diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts new file mode 100644 index 000000000000..f5c95c9a712e --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Author: Taishi Shimizu <s.taishi14142@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708"; + model = "Buffalo WXR-1750DHP"; + + memory@0 { + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-aoss { + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + }; + + /* GPIO 3 is a switch button with AUTO / MANUAL. */ + button-manual { + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + label = "MANUAL"; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + + button-restart { + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + label = "Reset"; + linux,code = <KEY_RESTART>; + }; + + /* GPIO 8 and 9 are a tri-state switch button with + * ROUTER / AP / WB. + */ + button-router { + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + label = "ROUTER"; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + + button-wb { + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + label = "WB"; + linux,code = <BTN_2>; + linux,input-type = <EV_SW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-internet { + color = <LED_COLOR_ID_WHITE>; + function = "internet"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + + led-power0 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + + led-power1 { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + + led-router0 { + color = <LED_COLOR_ID_AMBER>; + function = "router"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + + led-router1 { + color = <LED_COLOR_ID_WHITE>; + function = "router"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + + led-usb { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_USB; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbport"; + trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + }; + + port@1 { + label = "lan4"; + }; + + port@2 { + label = "lan3"; + }; + + port@3 { + label = "lan2"; + }; + + port@4 { + label = "lan1"; + }; + }; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +}; + +&usb3_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts index adc74243ed19..0b15ccaa762e 100644 --- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts @@ -46,8 +46,8 @@ i2c: i2c { compatible = "i2c-gpio"; - gpios = <&portd 4 GPIO_ACTIVE_HIGH>, - <&portd 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; i2c-gpio,scl-output-only; #address-cells = <1>; diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile index ab8525f1ea1d..cb30d8d55016 100644 --- a/arch/arm/boot/dts/intel/ixp/Makefile +++ b/arch/arm/boot/dts/intel/ixp/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_IXP4XX) += \ + intel-ixp42x-actiontec-mi424wr-ac.dtb \ + intel-ixp42x-actiontec-mi424wr-d.dtb \ intel-ixp42x-linksys-nslu2.dtb \ intel-ixp42x-linksys-wrv54g.dtb \ intel-ixp42x-freecom-fsg-3.dtb \ diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts new file mode 100644 index 000000000000..413b9255f9e3 --- /dev/null +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C + * Based on a board file from OpenWrt by Jose Vasconcellos. + */ + +/dts-v1/; + +#include "intel-ixp42x-actiontec-mi424wr.dtsi" + +/ { + model = "Actiontec MI424WR rev A/C"; + compatible = "actiontec,mi424wr-ac", "intel,ixp42x"; + + soc { + /* EthB used for WAN */ + ethernet@c8009000 { + phy-handle = <&phy17>; // 17 on revision A-C + + mdio { + phy17: ethernet-phy@17 { + /* WAN */ + reg = <17>; + }; + }; + }; + + /* EthC used for LAN */ + ethernet@c800a000 { + /* Fixed link to the CPU MII port on the KS8995 */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts new file mode 100644 index 000000000000..3619c6411a5c --- /dev/null +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for the IXP425-based Actiontec MI424WR revision D + * Based on a board file from OpenWrt by Jose Vasconcellos. + */ + +/dts-v1/; + +#include "intel-ixp42x-actiontec-mi424wr.dtsi" + +/ { + model = "Actiontec MI424WR rev D"; + compatible = "actiontec,mi424wr-d", "intel,ixp42x"; + + soc { + /* EthB used for LAN */ + ethernet@c8009000 { + /* Fixed link to the CPU MII port on the KS8995 */ + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio { + /* PHY ID 0x00221450 */ + phy5: ethernet-phy@5 { + /* WAN */ + reg = <5>; + }; + }; + }; + + /* EthC used for WAN */ + ethernet@c800a000 { + phy-handle = <&phy5>; // 5 on revision D + }; + }; +}; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi new file mode 100644 index 000000000000..76fd97c5beb6 --- /dev/null +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for the IXP425-based Actiontec MI424WR + * Based on a board file from OpenWrt by Jose Vasconcellos. + */ + +#include "intel-ixp42x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x02000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "uart1:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-wan-coax { + color = <LED_COLOR_ID_GREEN>; + function = "wan-coax"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-power-alarm { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_ALARM; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-power { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_POWER; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-wireless { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-internet-down { + color = <LED_COLOR_ID_RED>; + function = "internet-down"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-internet-up { + color = <LED_COLOR_ID_GREEN>; + function = "internet-up"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-lan-coax { + color = <LED_COLOR_ID_GREEN>; + function = "lan-coax"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-wan-ethernet-alarm { + color = <LED_COLOR_ID_RED>; + function = "wan-ethernet-alarm"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + /* The last three LEDs are not mounted but traces exist on the PCB */ + led-phone-1 { + color = <LED_COLOR_ID_GREEN>; + function = "phone-1"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-phone-2 { + color = <LED_COLOR_ID_GREEN>; + function = "phone-2"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led-voip { + color = <LED_COLOR_ID_GREEN>; + function = "voip"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-reset { + wakeup-source; + linux,code = <KEY_RESTART>; + label = "reset"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + ethernet-switch@0 { + compatible = "micrel,ks8995"; + reg = <0>; + spi-max-frequency = <50000000>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "mii"; + phy-handle = <&phy1>; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "mii"; + phy-handle = <&phy2>; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "mii"; + phy-handle = <&phy3>; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "mii"; + phy-handle = <&phy4>; + }; + ethernet-port@4 { + reg = <4>; + ethernet = <ðc>; + phy-mode = "mii"; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + }; + }; + }; + + soc { + bus@c4000000 { + flash@0,0 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 64 0x20000 sized blocks + * mapped in at CS0. + */ + reg = <0 0x00000000 0x0800000>; + + /* Configure expansion bus to allow writes */ + intel,ixp4xx-eb-write-enable = <1>; + + partitions { + compatible = "redboot-fis"; + fis-index-block = <0x3f>; + }; + }; + gpio1: gpio@1,0 { + /* MMIO GPIO at CS1 */ + compatible = "intel,ixp4xx-expansion-bus-mmio-gpio"; + gpio-controller; + #gpio-cells = <2>; + big-endian; + reg = <1 0x00000000 0x2>; + reg-names = "dat"; + /* Expansion bus settings */ + intel,ixp4xx-eb-write-enable = <1>; + + pci-reset-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PCI reset"; + }; + pstn-relay-hog-1 { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "PSTN relay control 1"; + }; + pstn-relay-hog-2 { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "PSTN relay control 2"; + }; + }; + }; + + pci@c0000000 { + status = "okay"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + /* IDSEL 13 */ + <0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */ + <0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */ + /* IDSEL 14 */ + <0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */ + <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */ + /* IDSEL 15 */ + <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */ + <0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */ + }; + + ethb: ethernet@c8009000 { + status = "okay"; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + phy-mode = "mii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* 1, 2, 3 and 4 are ports on the KS8995 switch */ + phy1: ethernet-phy@1 { + /* LAN1 */ + reg = <1>; + }; + phy2: ethernet-phy@2 { + /* LAN2 */ + reg = <2>; + }; + phy3: ethernet-phy@3 { + /* LAN3 */ + reg = <3>; + }; + phy4: ethernet-phy@4 { + /* LAN4 */ + reg = <4>; + }; + }; + }; + + ethc: ethernet@c800a000 { + status = "okay"; + queue-rx = <&qmgr 4>; + queue-txready = <&qmgr 21>; + phy-mode = "mii"; + }; + }; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts index ce0d6514eeb5..e4794ccb8e41 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts @@ -66,8 +66,10 @@ mdio0 { #address-cells = <1>; #size-cells = <0>; - phy0: ethernet-phy@0 { - reg = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@4 { + reg = <4>; rxd0-skew-ps = <0>; rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts index a7dc4c04d10b..a9a05d826f22 100644 --- a/arch/arm/boot/dts/marvell/armada-370-db.dts +++ b/arch/arm/boot/dts/marvell/armada-370-db.dts @@ -119,7 +119,7 @@ "Out Jack", "HPL", "Out Jack", "HPR", "AIN1L", "In Jack", - "AIN1L", "In Jack"; + "AIN1R", "In Jack"; status = "okay"; simple-audio-card,dai-link@0 { diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts index d4e0b8150a84..cf26e2ceaaa0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts @@ -38,7 +38,7 @@ simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { - sound-dai = <&audio0 0>; + sound-dai = <&audio0>; }; simple-audio-card,codec { diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts index 7eaf6ca233ec..927c27260b6c 100644 --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts @@ -11,6 +11,8 @@ #include "sama7d65-pinfunc.h" #include "sama7d65.dtsi" #include <dt-bindings/mfd/atmel-flexcom.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/at91.h> / { @@ -26,6 +28,43 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button { + label = "PB_USER"; + gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROG1>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + + led0: led-red { + color = <LED_COLOR_ID_RED>; + gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */ + }; + + led1: led-green { + color = <LED_COLOR_ID_GREEN>; + gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */ + }; + + led2: led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; @@ -346,12 +385,24 @@ bias-pull-up; }; - pinctrl_i2c10_default: i2c10-default{ + pinctrl_i2c10_default: i2c10-default { pinmux = <PIN_PB19__FLEXCOM10_IO1>, <PIN_PB20__FLEXCOM10_IO0>; bias-pull-up; }; + pinctrl_key_gpio_default: key-gpio-default { + pinmux = <PIN_PC10__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led-gpio-default { + pinmux = <PIN_PB15__GPIO>, + <PIN_PB17__GPIO>, + <PIN_PA21__GPIO>; + bias-pull-up; + }; + pinctrl_sdmmc1_default: sdmmc1-default { cmd-data { pinmux = <PIN_PB22__SDMMC1_CMD>, @@ -387,6 +438,8 @@ &sdmmc1 { bus-width = <4>; + no-1-8-v; + sdhci-caps-mask = <0x0 0x00200000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc1_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi index 66c07e642c3e..46dacbbd201d 100644 --- a/arch/arm/boot/dts/microchip/sam9x7.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi @@ -271,6 +271,27 @@ status = "disabled"; }; + qspi: spi@f0014000 { + compatible = "microchip,sam9x7-ospi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xf0014000 0x100>, <0x60000000 0x20000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(26))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 35>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>; + status = "disabled"; + }; + i2s: i2s@f001c000 { compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc"; reg = <0xf001c000 0x100>; diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index c191acc2c89f..e53e2dd6d530 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -91,7 +91,7 @@ }; sfrbu: sfr@e0008000 { - compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; + compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; reg = <0xe0008000 0x20>; }; @@ -506,6 +506,21 @@ #size-cells = <1>; status = "disabled"; + uart3: serial@200 { + compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + clock-names = "usart"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + status = "disabled"; + }; + i2c3: i2c@600 { compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c"; reg = <0x600 0x200>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi index 791090f54d8b..98c35771534e 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi @@ -134,7 +134,7 @@ status = "disabled"; }; - gmac0: eth@f0802000 { + gmac0: ethernet@f0802000 { device_type = "network"; compatible = "snps,dwmac"; reg = <0xf0802000 0x2000>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi index f42ad259636c..65fe3a180bb1 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi @@ -44,7 +44,7 @@ }; ahb { - gmac1: eth@f0804000 { + gmac1: ethernet@f0804000 { device_type = "network"; compatible = "snps,dwmac"; reg = <0xf0804000 0x2000>; diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile index 7c1d3cb5dcf0..2ed2d923c8f9 100644 --- a/arch/arm/boot/dts/nvidia/Makefile +++ b/arch/arm/boot/dts/nvidia/Makefile @@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ + tegra20-asus-sl101.dtb \ tegra20-asus-tf101.dtb \ tegra20-harmony.dtb \ tegra20-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi index 4caf2073c556..a2a50f959927 100644 --- a/arch/arm/boot/dts/nvidia/tegra114.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra114-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/nvidia,tegra114-car.h> #include <dt-bindings/soc/tegra-pmc.h> / { @@ -693,6 +694,29 @@ #nvidia,mipi-calibrate-cells = <1>; }; + dfll: clock@70110000 { + compatible = "nvidia,tegra114-dfll"; + reg = <0x70110000 0x100>, /* DFLL control */ + <0x70110000 0x100>, /* I2C output control */ + <0x70110100 0x100>, /* Integrated I2C controller */ + <0x70110200 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>, + <&tegra_car TEGRA114_CLK_DFLL_REF>, + <&tegra_car TEGRA114_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <10>; + nvidia,ci = <0>; + nvidia,cg = <2>; + status = "disabled"; + }; + mmc@78000000 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000000 0x200>; @@ -824,6 +848,15 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + clocks = <&tegra_car TEGRA114_CLK_CCLK_G>, + <&tegra_car TEGRA114_CLK_CCLK_LP>, + <&tegra_car TEGRA114_CLK_PLL_X>, + <&tegra_car TEGRA114_CLK_PLL_P>, + <&dfll>; + clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + /* FIXME: what's the actual transition time? */ + clock-latency = <300000>; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts new file mode 100644 index 000000000000..8828129d1fa3 --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra20-asus-transformer-common.dtsi" + +/ { + model = "ASUS Eee Pad Slider SL101"; + compatible = "asus,sl101", "nvidia,tegra20"; + + i2c@7000c000 { + magnetometer@e { + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + + /* Atmel MXT1386 Touchscreen */ + touchscreen@5a { + compatible = "atmel,maxtouch"; + reg = <0x5a>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + + vdda-supply = <&vdd_3v3_sys>; + vdd-supply = <&vdd_3v3_sys>; + + atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>; + }; + + gyroscope@68 { + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + i2c-gate { + accelerometer@f { + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; + + switch-tablet-mode { + label = "Tablet Mode"; + gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + debounce-interval = <500>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts index 67764afeb013..0d93820a5ad4 100644 --- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts @@ -1,542 +1,19 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include <dt-bindings/input/atmel-maxtouch.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> - -#include "tegra20.dtsi" -#include "tegra20-cpu-opp.dtsi" -#include "tegra20-cpu-opp-microvolt.dtsi" +#include "tegra20-asus-transformer-common.dtsi" / { - model = "ASUS EeePad Transformer TF101"; + model = "ASUS Eee Pad Transformer TF101"; compatible = "asus,tf101", "nvidia,tegra20"; - chassis-type = "convertible"; - - aliases { - mmc0 = &sdmmc4; /* eMMC */ - mmc1 = &sdmmc3; /* MicroSD */ - mmc2 = &sdmmc1; /* WiFi */ - - rtc0 = &pmic; - rtc1 = "/rtc@7000e000"; - - serial0 = &uartd; - serial1 = &uartc; /* Bluetooth */ - serial2 = &uartb; /* GPS */ - }; - - /* - * The decompressor and also some bootloaders rely on a - * pre-existing /chosen node to be available to insert the - * command line and merge other ATAGS info. - */ - chosen {}; - - memory@0 { - reg = <0x00000000 0x40000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - ramoops@2ffe0000 { - compatible = "ramoops"; - reg = <0x2ffe0000 0x10000>; /* 64kB */ - console-size = <0x8000>; /* 32kB */ - record-size = <0x400>; /* 1kB */ - ecc-size = <16>; - }; - - linux,cma@30000000 { - compatible = "shared-dma-pool"; - alloc-ranges = <0x30000000 0x10000000>; - size = <0x10000000>; /* 256MiB */ - linux,cma-default; - reusable; - }; - }; - - host1x@50000000 { - dc@54200000 { - rgb { - status = "okay"; - - port { - lcd_output: endpoint { - remote-endpoint = <&lvds_encoder_input>; - bus-width = <18>; - }; - }; - }; - }; - - hdmi@54280000 { - status = "okay"; - - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - hdmi-supply = <&vdd_hdmi_en>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; - }; - }; - - gpio@6000d000 { - charging-enable-hog { - gpio-hog; - gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; - output-low; - }; - }; - - pinmux@70000014 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ata { - nvidia,pins = "ata"; - nvidia,function = "ide"; - }; - - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - }; - - atc { - nvidia,pins = "atc"; - nvidia,function = "nand"; - }; - - atd { - nvidia,pins = "atd", "ate", "gmb", "spia", - "spib", "spic"; - nvidia,function = "gmi"; - }; - - cdev1 { - nvidia,pins = "cdev1"; - nvidia,function = "plla_out"; - }; - - cdev2 { - nvidia,pins = "cdev2"; - nvidia,function = "pllp_out4"; - }; - - crtp { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - }; - - lm1 { - nvidia,pins = "lm1"; - nvidia,function = "rsvd3"; - }; - - csus { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; - }; - - dap1 { - nvidia,pins = "dap1"; - nvidia,function = "dap1"; - }; - - dap2 { - nvidia,pins = "dap2"; - nvidia,function = "dap2"; - }; - - dap3 { - nvidia,pins = "dap3"; - nvidia,function = "dap3"; - }; - - dap4 { - nvidia,pins = "dap4"; - nvidia,function = "dap4"; - }; - - dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; - nvidia,function = "vi"; - }; - - dtf { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; - }; - - gmc { - nvidia,pins = "gmc"; - nvidia,function = "uartd"; - }; - - gmd { - nvidia,pins = "gmd"; - nvidia,function = "sflash"; - }; - - gpu { - nvidia,pins = "gpu"; - nvidia,function = "pwm"; - }; - - gpu7 { - nvidia,pins = "gpu7"; - nvidia,function = "rtck"; - }; - - gpv { - nvidia,pins = "gpv", "slxa"; - nvidia,function = "pcie"; - }; - - hdint { - nvidia,pins = "hdint"; - nvidia,function = "hdmi"; - }; - - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; - }; - - irrx { - nvidia,pins = "irrx", "irtx"; - nvidia,function = "uartb"; - }; - - kbca { - nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", - "kbce", "kbcf"; - nvidia,function = "kbc"; - }; - - lcsn { - nvidia,pins = "lcsn", "ldc", "lm0", "lpw1", - "lsdi", "lvp0"; - nvidia,function = "rsvd4"; - }; - - ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldi", "lhp0", - "lhp1", "lhp2", "lhs", "lpp", "lpw0", - "lpw2", "lsc0", "lsc1", "lsck", "lsda", - "lspi", "lvp1", "lvs"; - nvidia,function = "displaya"; - }; - - owc { - nvidia,pins = "owc", "spdi", "spdo", "uac"; - nvidia,function = "rsvd2"; - }; - - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - }; - - rm { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - }; - - sdb { - nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk"; - nvidia,function = "sdio3"; - }; - - sdio1 { - nvidia,pins = "sdio1"; - nvidia,function = "sdio1"; - }; - - slxd { - nvidia,pins = "slxd"; - nvidia,function = "spdif"; - }; - - spid { - nvidia,pins = "spid", "spie", "spif"; - nvidia,function = "spi1"; - }; - - spig { - nvidia,pins = "spig", "spih"; - nvidia,function = "spi2_alt"; - }; - - uaa { - nvidia,pins = "uaa", "uab", "uda"; - nvidia,function = "ulpi"; - }; - - uad { - nvidia,pins = "uad"; - nvidia,function = "irda"; - }; - - uca { - nvidia,pins = "uca", "ucb"; - nvidia,function = "uartc"; - }; - - conf_ata { - nvidia,pins = "ata", "atb", "atc", "atd", - "cdev1", "cdev2", "dap1", "dap4", - "dte", "ddc", "dtf", "gma", "gmc", - "gme", "gpu", "gpu7", "gpv", "i2cp", - "irrx", "irtx", "pta", "rm", "sdc", - "sdd", "slxc", "slxd", "slxk", "spdi", - "spdo", "uac", "uad", - "uda", "csus"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - conf_ate { - nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd", - "owc", "spia", "spib", "spic", - "spid", "spie", "spig", "slxa"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - - conf_ck32 { - nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", - "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - }; - - conf_crtp { - nvidia,pins = "crtp", "spih"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - - conf_dta { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - conf_spif { - nvidia,pins = "spif"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - - conf_hdint { - nvidia,pins = "hdint", "lcsn", "ldc", "lm1", - "lpw1", "lsck", "lsda", "lsdi", "lvp0"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - - conf_kbca { - nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", - "kbce", "kbcf", "sdio1", "uaa", "uab", - "uca", "ucb"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - conf_lc { - nvidia,pins = "lc", "ls"; - nvidia,pull = <TEGRA_PIN_PULL_UP>; - }; - - conf_ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldi", "lhp0", - "lhp1", "lhp2", "lhs", "lm0", "lpp", - "lpw0", "lpw2", "lsc0", "lsc1", "lspi", - "lvp1", "lvs", "pmc", "sdb"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - - conf_ld17_0 { - nvidia,pins = "ld17_0", "ld19_18", "ld21_20", - "ld23_22"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - }; - - drive_sdio1 { - nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1"; - nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; - nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; - nvidia,pull-down-strength = <31>; - nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; - }; - - drive_csus { - nvidia,pins = "drive_csus"; - nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; - nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; - nvidia,pull-down-strength = <31>; - nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; - nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; - }; - }; - - state_i2cmux_ddc: pinmux-i2cmux-ddc { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; - - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - - state_i2cmux_idle: pinmux-i2cmux-idle { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - - state_i2cmux_pta: pinmux-i2cmux-pta { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; - }; - }; - - spdif@70002400 { - status = "okay"; - - nvidia,fixed-parent-rate; - }; - - i2s@70002800 { - status = "okay"; - - nvidia,fixed-parent-rate; - }; - - serial@70006040 { - compatible = "nvidia,tegra20-hsuart"; - reset-names = "serial"; - /delete-property/ reg-shift; - /* GPS BCM4751 */ - }; - - serial@70006200 { - compatible = "nvidia,tegra20-hsuart"; - reset-names = "serial"; - /delete-property/ reg-shift; - status = "okay"; - - /* Azurewave AW-NH615 BCM4329B1 */ - bluetooth { - compatible = "brcm,bcm4329-bt"; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "host-wakeup"; - - /* PLLP 216MHz / 16 / 4 */ - max-speed = <3375000>; - - clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; - clock-names = "txco"; - - vbat-supply = <&vdd_3v3_sys>; - vddio-supply = <&vdd_1v8_sys>; - - device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; - }; - }; - - serial@70006300 { - /delete-property/ dmas; - /delete-property/ dma-names; - status = "okay"; - }; - - pwm@7000a000 { - status = "okay"; - }; i2c@7000c000 { - status = "okay"; - clock-frequency = <400000>; - - /* Aichi AMI306 digital compass */ magnetometer@e { - compatible = "asahi-kasei,ak8974"; - reg = <0xe>; - - avdd-supply = <&vdd_3v3_sys>; - dvdd-supply = <&vdd_1v8_sys>; - mount-matrix = "-1", "0", "0", "0", "1", "0", "0", "0", "-1"; }; - wm8903: audio-codec@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>; - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0x83>; - micdet-delay = <100>; - - gpio-cfg = < - 0x00000600 /* DMIC_LR, output */ - 0x00000680 /* DMIC_DAT, input */ - 0x00000000 /* Speaker-enable GPIO, output, low */ - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ - >; - - AVDD-supply = <&vdd_1v8_sys>; - CPVDD-supply = <&vdd_1v8_sys>; - DBVDD-supply = <&vdd_1v8_sys>; - DCVDD-supply = <&vdd_1v8_sys>; - }; - /* Atmel MXT1386 Touchscreen */ touchscreen@5b { compatible = "atmel,maxtouch"; @@ -554,33 +31,12 @@ }; gyroscope@68 { - compatible = "invensense,mpu3050"; - reg = <0x68>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>; - - vdd-supply = <&vdd_3v3_sys>; - vlogic-supply = <&vdd_1v8_sys>; - mount-matrix = "0", "1", "0", "-1", "0", "0", "0", "0", "1"; i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - accelerometer@f { - compatible = "kionix,kxtf9"; - reg = <0xf>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>; - - vdd-supply = <&vdd_1v8_sys>; - vddio-supply = <&vdd_1v8_sys>; - mount-matrix = "-1", "0", "0", "0", "-1", "0", "0", "0", "-1"; @@ -589,461 +45,9 @@ }; }; - i2c2: i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <400000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <400000>; - - pmic: pmic@34 { - compatible = "ti,tps6586x"; - reg = <0x34>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - - ti,system-power-controller; - - #gpio-cells = <2>; - gpio-controller; - - sys-supply = <&vdd_5v0_sys>; - vin-sm0-supply = <&sys_reg>; - vin-sm1-supply = <&sys_reg>; - vin-sm2-supply = <&sys_reg>; - vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&sm2_reg>; - vinldo4-supply = <&sm2_reg>; - vinldo678-supply = <&sm2_reg>; - vinldo9-supply = <&sm2_reg>; - - regulators { - sys_reg: sys { - regulator-name = "vdd_sys"; - regulator-always-on; - }; - - vdd_core: sm0 { - regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-coupled-with = <&rtc_vdd &vdd_cpu>; - regulator-coupled-max-spread = <170000 550000>; - regulator-always-on; - regulator-boot-on; - - nvidia,tegra-core-regulator; - }; - - vdd_cpu: sm1 { - regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1125000>; - regulator-coupled-with = <&vdd_core &rtc_vdd>; - regulator-coupled-max-spread = <550000 550000>; - regulator-always-on; - regulator-boot-on; - - nvidia,tegra-cpu-regulator; - }; - - sm2_reg: sm2 { - regulator-name = "vdd_sm2,vin_ldo*"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - }; - - /* LDO0 is not connected to anything */ - - ldo1 { - regulator-name = "vdd_ldo1,avdd_pll*"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - rtc_vdd: ldo2 { - regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-coupled-with = <&vdd_core &vdd_cpu>; - regulator-coupled-max-spread = <170000 550000>; - regulator-always-on; - regulator-boot-on; - - nvidia,tegra-rtc-regulator; - }; - - ldo3 { - regulator-name = "vdd_ldo3,avdd_usb*"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo4 { - regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcore_emmc: ldo5 { - regulator-name = "vdd_ldo5,vcore_mmc"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - - ldo6 { - regulator-name = "vdd_ldo6,avdd_vdac"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - hdmi_vdd_reg: ldo7 { - regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_pll_reg: ldo8 { - regulator-name = "vdd_ldo8,avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo9 { - regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - - ldo_rtc { - regulator-name = "vdd_rtc_out,vdd_cell"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - nct1008: temperature-sensor@4c { - compatible = "onnn,nct1008"; - reg = <0x4c>; - vcc-supply = <&vdd_3v3_sys>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>; - - #thermal-sensor-cells = <1>; - }; - }; - - pmc@7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <1>; - nvidia,cpu-pwr-good-time = <2000>; - nvidia,cpu-pwr-off-time = <100>; - nvidia,core-pwr-good-time = <3845 3845>; - nvidia,core-pwr-off-time = <458>; - nvidia,sys-clock-req-active-high; - core-supply = <&vdd_core>; - }; - - memory-controller@7000f400 { - nvidia,use-ram-code; - - emc-tables@3 { - reg = <0x3>; - - #address-cells = <1>; - #size-cells = <0>; - - emc-table@25000 { - reg = <25000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = <25000>; - nvidia,emc-registers = <0x00000002 0x00000006 - 0x00000003 0x00000003 0x00000006 0x00000004 - 0x00000002 0x00000009 0x00000003 0x00000003 - 0x00000002 0x00000002 0x00000002 0x00000004 - 0x00000003 0x00000008 0x0000000b 0x0000004d - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000008 0x00000001 0x0000000a 0x00000004 - 0x00000003 0x00000008 0x00000004 0x00000006 - 0x00000002 0x00000068 0x00000000 0x00000003 - 0x00000000 0x00000000 0x00000282 0xa0ae04ae - 0x00070000 0x00000000 0x00000000 0x00000003 - 0x00000000 0x00000000 0x00000000 0x00000000>; - }; - - emc-table@50000 { - reg = <50000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = <50000>; - nvidia,emc-registers = <0x00000003 0x00000007 - 0x00000003 0x00000003 0x00000006 0x00000004 - 0x00000002 0x00000009 0x00000003 0x00000003 - 0x00000002 0x00000002 0x00000002 0x00000005 - 0x00000003 0x00000008 0x0000000b 0x0000009f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000008 0x00000001 0x0000000a 0x00000007 - 0x00000003 0x00000008 0x00000004 0x00000006 - 0x00000002 0x000000d0 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000282 0xa0ae04ae - 0x00070000 0x00000000 0x00000000 0x00000005 - 0x00000000 0x00000000 0x00000000 0x00000000>; - }; - - emc-table@75000 { - reg = <75000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = <75000>; - nvidia,emc-registers = <0x00000005 0x0000000a - 0x00000004 0x00000003 0x00000006 0x00000004 - 0x00000002 0x00000009 0x00000003 0x00000003 - 0x00000002 0x00000002 0x00000002 0x00000005 - 0x00000003 0x00000008 0x0000000b 0x000000ff - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000008 0x00000001 0x0000000a 0x0000000b - 0x00000003 0x00000008 0x00000004 0x00000006 - 0x00000002 0x00000138 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000282 0xa0ae04ae - 0x00070000 0x00000000 0x00000000 0x00000007 - 0x00000000 0x00000000 0x00000000 0x00000000>; - }; - - emc-table@150000 { - reg = <150000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = <150000>; - nvidia,emc-registers = <0x00000009 0x00000014 - 0x00000007 0x00000003 0x00000006 0x00000004 - 0x00000002 0x00000009 0x00000003 0x00000003 - 0x00000002 0x00000002 0x00000002 0x00000005 - 0x00000003 0x00000008 0x0000000b 0x0000021f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000008 0x00000001 0x0000000a 0x00000015 - 0x00000003 0x00000008 0x00000004 0x00000006 - 0x00000002 0x00000270 0x00000000 0x00000001 - 0x00000000 0x00000000 0x00000282 0xa07c04ae - 0x007dc010 0x00000000 0x00000000 0x0000000e - 0x00000000 0x00000000 0x00000000 0x00000000>; - }; - - emc-table@300000 { - reg = <300000>; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = <300000>; - nvidia,emc-registers = <0x00000012 0x00000027 - 0x0000000d 0x00000006 0x00000007 0x00000005 - 0x00000003 0x00000009 0x00000006 0x00000006 - 0x00000003 0x00000003 0x00000002 0x00000006 - 0x00000003 0x00000009 0x0000000c 0x0000045f - 0x00000000 0x00000004 0x00000004 0x00000006 - 0x00000008 0x00000001 0x0000000e 0x0000002a - 0x00000003 0x0000000f 0x00000007 0x00000005 - 0x00000002 0x000004e0 0x00000005 0x00000002 - 0x00000000 0x00000000 0x00000282 0xe059048b - 0x007e0010 0x00000000 0x00000000 0x0000001b - 0x00000000 0x00000000 0x00000000 0x00000000>; - }; - - lpddr2 { - compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4"; - revision-id = <1 0>; - density = <2048>; - io-width = <16>; - }; - }; - }; - - /* Peripheral USB via ASUS connector */ - usb@c5000000 { - compatible = "nvidia,tegra20-udc"; - status = "okay"; - dr_mode = "peripheral"; - }; - - usb-phy@c5000000 { - status = "okay"; - dr_mode = "peripheral"; - nvidia,xcvr-setup-use-fuses; - nvidia,xcvr-lsfslew = <2>; - nvidia,xcvr-lsrslew = <2>; - vbus-supply = <&vdd_5v0_sys>; - }; - - /* Dock's USB port */ - usb@c5008000 { - status = "okay"; - }; - - usb-phy@c5008000 { - status = "okay"; - nvidia,xcvr-setup-use-fuses; - vbus-supply = <&vdd_5v0_sys>; - }; - - sdmmc1: mmc@c8000000 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; - assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>; - assigned-clock-rates = <40000000>; - - max-frequency = <40000000>; - keep-power-in-suspend; - bus-width = <4>; - non-removable; - - mmc-pwrseq = <&brcm_wifi_pwrseq>; - vmmc-supply = <&vdd_3v3_sys>; - vqmmc-supply = <&vdd_3v3_sys>; - - /* Azurewave AW-NH615 BCM4329B1 */ - wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - }; - }; - - sdmmc3: mmc@c8000400 { - status = "okay"; - bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; - power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; - vmmc-supply = <&vdd_3v3_sys>; - vqmmc-supply = <&vdd_3v3_sys>; - }; - - sdmmc4: mmc@c8000600 { - status = "okay"; - bus-width = <8>; - vmmc-supply = <&vcore_emmc>; - vqmmc-supply = <&vdd_3v3_sys>; - non-removable; - }; - - mains: ac-adapter-detect { - compatible = "gpio-charger"; - charger-type = "mains"; - gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - - enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_3v3_sys>; - pwms = <&pwm 2 4000000>; - - brightness-levels = <7 255>; - num-interpolated-steps = <248>; - default-brightness-level = <20>; - }; - - /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock-32k-in { - compatible = "fixed-clock"; - clock-frequency = <32768>; - #clock-cells = <0>; - }; - - cpus { - cpu0: cpu@0 { - cpu-supply = <&vdd_cpu>; - operating-points-v2 = <&cpu0_opp_table>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - cpu-supply = <&vdd_cpu>; - operating-points-v2 = <&cpu0_opp_table>; - #cooling-cells = <2>; - }; - }; - - display-panel { - compatible = "auo,b101ew05", "panel-lvds"; - - /* AUO B101EW05 using custom timings */ - - backlight = <&backlight>; - ddc-i2c-bus = <&lvds_ddc>; - power-supply = <&vdd_pnl_reg>; - - width-mm = <218>; - height-mm = <135>; - - data-mapping = "jeida-18"; - - panel-timing { - clock-frequency = <71200000>; - hactive = <1280>; - vactive = <800>; - hfront-porch = <8>; - hback-porch = <18>; - hsync-len = <184>; - vsync-len = <3>; - vfront-porch = <4>; - vback-porch = <8>; - }; - - port { - panel_input: endpoint { - remote-endpoint = <&lvds_encoder_output>; - }; - }; - }; - - gpio-keys { + extcon-keys { compatible = "gpio-keys"; - key-power { - label = "Power"; - gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - - key-volume-down { - label = "Volume Down"; - gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - - key-volume-up { - label = "Volume Up"; - gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <10>; - wakeup-event-action = <EV_ACT_ASSERTED>; - wakeup-source; - }; - switch-dock-hall-sensor { label = "Lid"; gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>; @@ -1054,253 +58,4 @@ wakeup-source; }; }; - - i2cmux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&i2c2>; - - pinctrl-names = "ddc", "pta", "idle"; - pinctrl-0 = <&state_i2cmux_ddc>; - pinctrl-1 = <&state_i2cmux_pta>; - pinctrl-2 = <&state_i2cmux_idle>; - - hdmi_ddc: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - lvds_ddc: i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - smart-battery@b { - compatible = "ti,bq20z75", "sbs,sbs-battery"; - reg = <0xb>; - sbs,i2c-retry-count = <2>; - sbs,poll-retry-count = <10>; - power-supplies = <&mains>; - }; - - /* Dynaimage ambient light sensor */ - light-sensor@1c { - compatible = "dynaimage,al3000a"; - reg = <0x1c>; - - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; - - vdd-supply = <&vdd_1v8_sys>; - }; - }; - }; - - lvds-encoder { - compatible = "ti,sn75lvds83", "lvds-encoder"; - - powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>; - power-supply = <&vdd_3v3_sys>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_encoder_input: endpoint { - remote-endpoint = <&lcd_output>; - }; - }; - - port@1 { - reg = <1>; - - lvds_encoder_output: endpoint { - remote-endpoint = <&panel_input>; - }; - }; - }; - }; - - opp-table-emc { - /delete-node/ opp-666000000; - /delete-node/ opp-760000000; - }; - - vdd_5v0_sys: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vdd_3v3_sys: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "vdd_3v3_vs"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <&vdd_5v0_sys>; - }; - - regulator-pcie { - compatible = "regulator-fixed"; - regulator-name = "pcie_vdd"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - regulator-always-on; - }; - - vdd_pnl_reg: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "vdd_pnl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vdd_1v8_sys: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "vdd_1v8_vs"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_hdmi_en: regulator-hdmi { - compatible = "regulator-fixed"; - regulator-name = "vdd_5v0_hdmi_en"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&vdd_5v0_sys>; - gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sound { - compatible = "asus,tegra-audio-wm8903-tf101", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "Asus EeePad Transformer WM8903"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "IN2L", "Mic Jack", - "DMICDAT", "Int Mic"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; - nvidia,coupled-mic-hp-det; - - clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - }; - - thermal-zones { - /* - * NCT1008 has two sensors: - * - * 0: internal that monitors ambient/skin temperature - * 1: external that is connected to the CPU's diode - * - * Ideally we should use userspace thermal governor, - * but it's a much more complex solution. The "skin" - * zone is a simpler solution which prevents TF101 from - * getting too hot from a user's tactile perspective. - * The CPU zone is intended to protect silicon from damage. - */ - - skin-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&nct1008 0>; - - trips { - trip0: skin-alert { - /* start throttling at 60C */ - temperature = <60000>; - hysteresis = <200>; - type = "passive"; - }; - - trip1: skin-crit { - /* shut down at 70C */ - temperature = <70000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&trip0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&nct1008 1>; - - trips { - trip2: cpu-alert { - /* throttle at 85C until temperature drops to 84.8C */ - temperature = <85000>; - hysteresis = <200>; - type = "passive"; - }; - - trip3: cpu-crit { - /* shut down at 90C */ - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&trip2>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - brcm_wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - - clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; - clock-names = "ext_clock"; - - reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>; - post-power-on-delay-ms = <200>; - power-off-delay-us = <200>; - }; }; diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi new file mode 100644 index 000000000000..b48f53c00efa --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi @@ -0,0 +1,1268 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/input/atmel-maxtouch.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +#include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" + +/ { + chassis-type = "convertible"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* MicroSD */ + mmc2 = &sdmmc1; /* WiFi */ + + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + serial0 = &uartd; + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + memory@0 { + reg = <0x00000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@2ffe0000 { + compatible = "ramoops"; + reg = <0x2ffe0000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + linux,cma@30000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x30000000 0x10000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + port { + lcd_output: endpoint { + remote-endpoint = <&lvds_encoder_input>; + bus-width = <18>; + }; + }; + }; + }; + + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_hdmi_en>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; + }; + }; + + gpio@6000d000 { + charging-enable-hog { + gpio-hog; + gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + output-low; + }; + }; + + pinmux@70000014 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + + atd { + nvidia,pins = "atd", "ate", "gmb", "spia", + "spib", "spic"; + nvidia,function = "gmi"; + }; + + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + + lm1 { + nvidia,pins = "lm1"; + nvidia,function = "rsvd3"; + }; + + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; + nvidia,function = "vi"; + }; + + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + + gmd { + nvidia,pins = "gmd"; + nvidia,function = "sflash"; + }; + + gpu { + nvidia,pins = "gpu"; + nvidia,function = "pwm"; + }; + + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + + gpv { + nvidia,pins = "gpv", "slxa"; + nvidia,function = "pcie"; + }; + + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + }; + + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + + lcsn { + nvidia,pins = "lcsn", "ldc", "lm0", "lpw1", + "lsdi", "lvp0"; + nvidia,function = "rsvd4"; + }; + + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lpp", "lpw0", + "lpw2", "lsc0", "lsc1", "lsck", "lsda", + "lspi", "lvp1", "lvs"; + nvidia,function = "displaya"; + }; + + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk"; + nvidia,function = "sdio3"; + }; + + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + + slxd { + nvidia,pins = "slxd"; + nvidia,function = "spdif"; + }; + + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + + conf-ata { + nvidia,pins = "ata", "atb", "atc", "atd", + "cdev1", "cdev2", "dap1", "dap4", + "dte", "ddc", "dtf", "gma", "gmc", + "gme", "gpu", "gpu7", "gpv", "i2cp", + "irrx", "irtx", "pta", "rm", "sdc", + "sdd", "slxc", "slxd", "slxk", "spdi", + "spdo", "uac", "uad", + "uda", "csus"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + conf-ate { + nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd", + "owc", "spia", "spib", "spic", + "spid", "spie", "spig", "slxa"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + conf-ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + + conf-crtp { + nvidia,pins = "crtp", "spih"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + conf-dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + conf-spif { + nvidia,pins = "spif"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + conf-hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsck", "lsda", "lsdi", "lvp0"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + conf-kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf", "sdio1", "uaa", "uab", + "uca", "ucb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + conf-lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + }; + + conf-ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lsc1", "lspi", + "lvp1", "lvs", "pmc", "sdb"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + conf-ld17-0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + }; + + drive-sdio1 { + nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1"; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + }; + + drive-csus { + nvidia,pins = "drive_csus"; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + }; + }; + + state_i2cmux_ddc: pinmux-i2cmux-ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_idle: pinmux-i2cmux-idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux-i2cmux-pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + }; + + spdif@70002400 { + status = "okay"; + + nvidia,fixed-parent-rate; + }; + + i2s@70002800 { + status = "okay"; + + nvidia,fixed-parent-rate; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + /* GPS BCM4751 */ + }; + + serial@70006200 { + compatible = "nvidia,tegra20-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + /* Azurewave AW-NH615 BCM4329B1 */ + bluetooth { + compatible = "brcm,bcm4329-bt"; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; + + /* PLLP 216MHz / 16 / 4 */ + max-speed = <3375000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + vbat-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8_sys>; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + }; + }; + + serial@70006300 { + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + /* Aichi AMI306 digital compass */ + magnetometer@e { + compatible = "asahi-kasei,ak8974"; + reg = <0xe>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>; + + avdd-supply = <&vdd_3v3_sys>; + dvdd-supply = <&vdd_1v8_sys>; + }; + + wm8903: audio-codec@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0x83>; + micdet-delay = <100>; + + gpio-cfg = < + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ + 0x00000000 /* Speaker-enable GPIO, output, low */ + 0xffffffff /* don't touch */ + 0xffffffff /* don't touch */ + >; + + AVDD-supply = <&vdd_1v8_sys>; + CPVDD-supply = <&vdd_1v8_sys>; + DBVDD-supply = <&vdd_1v8_sys>; + DCVDD-supply = <&vdd_1v8_sys>; + }; + + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vdd_3v3_sys>; + vlogic-supply = <&vdd_1v8_sys>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0xf>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&vdd_1v8_sys>; + vddio-supply = <&vdd_1v8_sys>; + }; + }; + }; + }; + + i2c2: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_sys>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + vdd_core: sm0 { + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; + }; + + vdd_cpu: sm1 { + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vdd_core &rtc_vdd>; + regulator-coupled-max-spread = <550000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; + }; + + sm2_reg: sm2 { + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + ldo1 { + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + rtc_vdd: ldo2 { + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&vdd_core &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-rtc-regulator; + }; + + ldo3 { + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcore_emmc: ldo5 { + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo6 { + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + nct1008: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&vdd_3v3_sys>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>; + + #thermal-sensor-cells = <1>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; + }; + + memory-controller@7000f400 { + nvidia,use-ram-code; + + emc-tables@3 { + reg = <0x3>; + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@25000 { + reg = <25000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <25000>; + nvidia,emc-registers = <0x00000002 0x00000006 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000004 + 0x00000003 0x00000008 0x0000000b 0x0000004d + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000004 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000068 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@50000 { + reg = <50000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <50000>; + nvidia,emc-registers = <0x00000003 0x00000007 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000009f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000007 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x000000d0 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000005 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@75000 { + reg = <75000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <75000>; + nvidia,emc-registers = <0x00000005 0x0000000a + 0x00000004 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x000000ff + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x0000000b + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000138 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000007 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@150000 { + reg = <150000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <150000>; + nvidia,emc-registers = <0x00000009 0x00000014 + 0x00000007 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000021f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000015 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000270 0x00000000 0x00000001 + 0x00000000 0x00000000 0x00000282 0xa07c04ae + 0x007dc010 0x00000000 0x00000000 0x0000000e + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@300000 { + reg = <300000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <300000>; + nvidia,emc-registers = <0x00000012 0x00000027 + 0x0000000d 0x00000006 0x00000007 0x00000005 + 0x00000003 0x00000009 0x00000006 0x00000006 + 0x00000003 0x00000003 0x00000002 0x00000006 + 0x00000003 0x00000009 0x0000000c 0x0000045f + 0x00000000 0x00000004 0x00000004 0x00000006 + 0x00000008 0x00000001 0x0000000e 0x0000002a + 0x00000003 0x0000000f 0x00000007 0x00000005 + 0x00000002 0x000004e0 0x00000005 0x00000002 + 0x00000000 0x00000000 0x00000282 0xe059048b + 0x007e0010 0x00000000 0x00000000 0x0000001b + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + lpddr2 { + compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4"; + revision-id = <1 0>; + density = <2048>; + io-width = <16>; + }; + }; + }; + + /* Peripheral USB via ASUS connector */ + usb@c5000000 { + compatible = "nvidia,tegra20-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@c5000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_5v0_sys>; + }; + + /* Dock's USB port */ + usb@c5008000 { + status = "okay"; + }; + + usb-phy@c5008000 { + status = "okay"; + nvidia,xcvr-setup-use-fuses; + vbus-supply = <&vdd_5v0_sys>; + }; + + sdmmc1: mmc@c8000000 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>; + assigned-clock-rates = <40000000>; + + max-frequency = <40000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_3v3_sys>; + + /* Azurewave AW-NH615 BCM4329B1 */ + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; + }; + + sdmmc3: mmc@c8000400 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_3v3_sys>; + }; + + sdmmc4: mmc@c8000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_3v3_sys>; + non-removable; + }; + + mains: ac-adapter-detect { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_3v3_sys>; + pwms = <&pwm 2 4000000>; + + brightness-levels = <7 255>; + num-interpolated-steps = <248>; + default-brightness-level = <20>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock-32k-in { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + + display-panel { + compatible = "auo,b101ew05", "panel-lvds"; + + /* AUO B101EW05 using custom timings */ + + backlight = <&backlight>; + ddc-i2c-bus = <&lvds_ddc>; + power-supply = <&vdd_pnl_reg>; + + width-mm = <218>; + height-mm = <135>; + + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <71200000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <8>; + hback-porch = <18>; + hsync-len = <184>; + vsync-len = <3>; + vfront-porch = <4>; + vback-porch = <8>; + }; + + port { + panel_input: endpoint { + remote-endpoint = <&lvds_encoder_output>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c2>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + lvds_ddc: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + smart-battery@b { + compatible = "ti,bq20z75", "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; + power-supplies = <&mains>; + }; + + /* Dynaimage ambient light sensor */ + light-sensor@1c { + compatible = "dynaimage,al3000a"; + reg = <0x1c>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; + + vdd-supply = <&vdd_1v8_sys>; + }; + }; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + + powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>; + power-supply = <&vdd_3v3_sys>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_input: endpoint { + remote-endpoint = <&lcd_output>; + }; + }; + + port@1 { + reg = <1>; + + lvds_encoder_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + opp-table-emc { + /delete-node/ opp-666000000; + /delete-node/ opp-760000000; + }; + + vdd_5v0_sys: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_sys: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_vs"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pcie_vdd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + vdd_pnl_reg: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_1v8_sys: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_vs"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_hdmi_en: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0_hdmi_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "asus,tegra-audio-wm8903-tf101", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Asus EeePad Transformer WM8903"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "IN2L", "Mic Jack", + "DMICDAT", "Int Mic"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; + + thermal-zones { + /* + * NCT1008 has two sensors: + * + * 0: internal that monitors ambient/skin temperature + * 1: external that is connected to the CPU's diode + * + * Ideally we should use userspace thermal governor, + * but it's a much more complex solution. The "skin" + * zone is a simpler solution which prevents TF101 from + * getting too hot from a user's tactile perspective. + * The CPU zone is intended to protect silicon from damage. + */ + + skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 0>; + + trips { + trip0: skin-alert { + /* start throttling at 60C */ + temperature = <60000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: skin-crit { + /* shut down at 70C */ + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip2: cpu-alert { + /* throttle at 85C until temperature drops to 84.8C */ + temperature = <85000>; + hysteresis = <200>; + type = "passive"; + }; + + trip3: cpu-crit { + /* shut down at 90C */ + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <&trip2>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + brcm_wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; + power-off-delay-us = <200>; + }; +}; diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts index 2f7754fd42a1..c6ef0a20c19f 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts +++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts @@ -108,8 +108,8 @@ i2c@7000c400 { touchscreen@20 { rmi4-f11@11 { - syna,clip-x-high = <1110>; - syna,clip-y-high = <1973>; + syna,clip-x-high = <1440>; + syna,clip-y-high = <2560>; touchscreen-inverted-y; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi index ef546525e2ec..0064b5452b54 100644 --- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi @@ -26,7 +26,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi index 0a150c91d30f..244740d65b3d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi @@ -26,7 +26,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi index ebbd4d93e460..543cf723008f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi @@ -42,14 +42,14 @@ led-bus { label = "bus"; gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; led-error { label = "error"; gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi index df543b4751e0..89b17509ad48 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi @@ -47,7 +47,7 @@ interrupt-parent = <&gpio7>; irq-trigger = <0x1>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts index 4989e8d069a1..9bb36db131c2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts @@ -25,7 +25,7 @@ clock-output-names = "enet_ref_pad"; }; - i2c2-mux { + i2c-mux-2 { compatible = "i2c-mux"; i2c-parent = <&i2c2>; mux-controls = <&i2c_mux>; @@ -45,7 +45,7 @@ }; }; - i2c4-mux { + i2c-mux-4 { compatible = "i2c-mux"; i2c-parent = <&i2c4>; mux-controls = <&i2c_mux>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts index c9b2ea2b24b2..fc62ba2a4fcb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts index 5e15212eaf3a..a7400d42475b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; #include "imx6dl.dtsi" diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts index 0b1275a8891f..2160b7177835 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts @@ -557,7 +557,6 @@ &usbh1 { vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; disable-over-current; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi index de80ca141bca..7a3b96315eaf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi @@ -157,7 +157,7 @@ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - rtc: m41t62@68 { + rtc: rtc@68 { compatible = "st,m41t62"; reg = <0x68>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts index e9ac4768f36c..55b7e91d2ac0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts @@ -389,8 +389,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi index d77472519086..53013b12c2ec 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi @@ -222,6 +222,8 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio7>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index aa1adcc74019..e1d0c6e123fd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: flash@0 { + m25_eeprom: eeprom@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts index 16658b76fc4e..059750270fc4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts @@ -1,38 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi index 4ab31f2217cd..4e448b4810f2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi @@ -1,38 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * Copyright 2017 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts index c5525b2c1dbd..17fabff80e90 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts @@ -266,7 +266,7 @@ reg = <0x4d>; }; - rtc: m41t62@68 { + rtc: rtc@68 { compatible = "st,m41t62"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts index d2d0a82ea178..484a60892229 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: flash@0 { + m25_eeprom: eeprom@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts index c5c144879fa6..bf8fde9cb38d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts @@ -184,7 +184,7 @@ #gpio-cells = <2>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts index 46e011a363e8..4c8ea4381559 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts @@ -171,7 +171,7 @@ reg = <0x51>; }; - rtc: pcf8523@68 { + rtc: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi index c425d427663d..d6deb8c22b8c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi @@ -69,14 +69,14 @@ led-green { label = "led1"; gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; led-red { label = "led0"; gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts index bba82126aaaa..ef5c0eda8b15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts @@ -292,8 +292,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_backlight: dispgrp { fsl,pins = < /* BLEN_OUT */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts index 8c3a9ea8d5b3..24fc3ff1c70c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts @@ -265,7 +265,7 @@ reg = <0x1c>; }; - rtc: pcf8523@68 { + rtc: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; @@ -288,7 +288,7 @@ vio-supply = <®_3p3v>; vcc-supply = <®_3p3v>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index b13000a62a7b..5fcd7cdb7001 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -648,7 +648,7 @@ /* ADC conversion time: 80 clocks */ st,sample-time = <4>; - stmpe_ts: stmpe_touchscreen { + stmpe_ts: touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -665,7 +665,7 @@ st,touch-det-delay = <5>; }; - stmpe_adc: stmpe_adc { + stmpe_adc: adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; /* forbid to use ADC channels 3-0 (touch) */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi index 7cc7ae195988..01d4ea20b13d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) /* * support for the imx6 based aristainetos2 board * * Copyright (C) 2015 Heiko Schocher <hs@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/imx6qdl-clock.h> @@ -150,6 +114,8 @@ reg = <0x58>; interrupt-parent = <&gpio1>; interrupts = <04 0x8>; + #interrupt-cells = <2>; + interrupt-controller; regulators { bcore1 { @@ -324,8 +290,9 @@ #address-cells = <1>; #size-cells = <0>; - ethphy: ethernet-phy { + ethphy: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 3525cbcda57f..419d85b5a660 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -572,7 +572,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_ts: stmpe_touchscreen { + stmpe_ts: touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi index 41d073f5bfe7..c504cf7e9492 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi @@ -118,7 +118,7 @@ pinctrl-0 = <&pinctrl_gpio_key>; pinctrl-names = "default"; - button_0 { + button-0 { label = "Button 0"; gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index 97763db3959f..9f4e746beb2d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -33,7 +33,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_emcon_wake>; - wake { + key-wake { label = "Wake"; linux,code = <KEY_WAKEUP>; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; @@ -225,6 +225,8 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi index e75e1a5364b8..beff5a0f58ab 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -156,6 +156,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -270,7 +271,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index b57f4073f881..9d3ba4083216 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,21 +53,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -230,6 +230,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -350,7 +351,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 090c0057d117..7e84e0a52ef3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -33,13 +33,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -53,21 +53,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -223,6 +223,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -349,7 +350,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index 94f1d1ae59aa..81394d47dd68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -34,13 +34,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -54,21 +54,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -376,7 +376,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi index 009a9d56757c..6136a95b9259 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi @@ -26,13 +26,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -46,21 +46,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -179,6 +179,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -287,7 +288,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi index 77ae611b817a..9c822ca23130 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -45,21 +45,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -146,6 +146,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -260,7 +261,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi index e3b677384a22..552114a69f5b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -142,6 +142,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -256,7 +257,7 @@ pagesize = <16>; }; - rtc: ds1672@68 { + rtc: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index ce1d49a9e0cd..ea92b2b5c50d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -50,13 +50,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -70,21 +70,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -254,6 +254,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index 50b484998c49..b518bcb6b7a9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -34,13 +34,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -54,21 +54,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -195,6 +195,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 3125cd04d4ea..3df4d345da98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -36,13 +36,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -56,21 +56,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -260,6 +260,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi index 955a51226eda..87fdc9e2a727 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -156,6 +156,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { @@ -270,7 +271,7 @@ pagesize = <16>; }; - ds1672@68 { + rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi index 453dee4d9227..099ed2f94d61 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi @@ -27,13 +27,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -47,21 +47,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -165,6 +165,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi index add700bc11cc..cbca5e58e812 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -45,21 +45,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi index 82f47c295b08..4e4dce5adc15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi @@ -24,13 +24,13 @@ gpio-keys { compatible = "gpio-keys"; - user-pb { + key-user-pb { label = "user_pb"; gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; - user-pb1x { + key-user-pb1x { label = "user_pb1x"; linux,code = <BTN_1>; interrupt-parent = <&gsc>; @@ -44,21 +44,21 @@ interrupts = <1>; }; - eeprom-wp { + key-eeprom-wp { label = "eeprom_wp"; linux,code = <BTN_3>; interrupt-parent = <&gsc>; interrupts = <2>; }; - tamper { + key-tamper { label = "tamper"; linux,code = <BTN_4>; interrupt-parent = <&gsc>; interrupts = <5>; }; - switch-hold { + key-switch-hold { label = "switch_hold"; linux,code = <BTN_5>; interrupt-parent = <&gsc>; @@ -141,6 +141,7 @@ interrupts = <4 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; + #address-cells = <1>; #size-cells = <0>; adc { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi index 54d4bced2395..6b737360a532 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi @@ -332,7 +332,6 @@ }; &pwm2 { - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index 8ee65f9858c0..8d471450d5c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -57,13 +57,13 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - home { + key-home { label = "Home"; gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; linux,code = <102>; }; - back { + key-back { label = "Back"; gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; linux,code = <158>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index 43d474bbf55d..c727aac257f9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -86,45 +86,45 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; }; }; - i2c2mux { + i2c-mux-2 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2mux>; @@ -148,7 +148,7 @@ }; }; - i2c3mux { + i2c-mux-3 { compatible = "i2c-mux-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3mux>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 8e64314fa8b2..806af7f60419 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -47,38 +47,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index 8a0bfc387a59..c71aa7498acf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -80,38 +80,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi index 037b60197598..fc78acc9f5c5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi @@ -13,14 +13,14 @@ pinctrl-0 = <&pinctrl_gpio_keys>; status = "disabled"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; wakeup-source; }; - sleep { + key-sleep { label = "Sleep Button"; gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_SLEEP>; @@ -35,19 +35,19 @@ user-led1 { gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led2 { gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led3 { gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 0b4c09b09c03..a3c2811e9c6f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -162,7 +162,7 @@ interrupts = <12 IRQ_TYPE_NONE>; status = "disabled"; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi index 64ded5e5559c..22d5918ee4d8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi @@ -23,7 +23,6 @@ reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "usbh1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -33,7 +32,6 @@ reg_usb_otg_vbus: regulator-otg-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 2587d17c5918..b9dde0af3b99 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -32,35 +32,35 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - home { + key-home { label = "Home"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; wakeup-source; }; - back { + key-back { label = "Back"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; wakeup-source; }; - program { + key-program { label = "Program"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROGRAM>; wakeup-source; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi index bdef7e642d3c..f7abc17c7c93 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi @@ -108,38 +108,38 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; wakeup-source; }; - menu { + key-menu { label = "Menu"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; - home { + key-home { label = "Home"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; - back { + key-back { label = "Back"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index 960e83f5e904..e8368c6b27ef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -71,21 +71,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_POWER>; }; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <KEY_VOLUMEUP>; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi index 6823a639ed2f..2daf2b6af884 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi @@ -58,7 +58,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + key-power { gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; label = "Power Button"; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi index 11c70431feec..17f6a568f0e8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi @@ -213,12 +213,12 @@ status = "okay"; m41t00s: rtc@68 { - compatible = "m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; isl12022: rtc@6f { - compatible = "isl,isl12022"; + compatible = "isil,isl12022"; reg = <0x6f>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi index 2bb5b762c984..57297d6521cf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi @@ -44,7 +44,7 @@ gpio-keys { compatible = "gpio-keys"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi index 96e4f4b0b248..de2b12dad7d8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi @@ -429,7 +429,6 @@ }; &usbh1 { - pinctrl-names = "default"; phy_type = "utmi"; dr_mode = "host"; disable-over-current; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts index 56040da0bd25..b6c336e3079e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts @@ -84,7 +84,7 @@ led-1 { label = "tolinoshine2hd:white:backlightboost"; gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi index 8c5ca4f9b87f..704870e8c10c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi @@ -309,7 +309,7 @@ reg = <0x02034000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; - dma-name = "rx", "tx"; + dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART3_IPG>, <&clks IMX6SLL_CLK_UART3_SERIAL>; clock-names = "ipg", "per"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index 67cf09e63a63..c7aeb99d8f00 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -33,14 +33,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - volume-up { + key-volume-up { label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; wakeup-source; }; - volume-down { + key-volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 911ccbd132cf..73c9cfbdba62 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -22,6 +22,26 @@ status = "okay"; }; + reg_1v5: regulator-1v5 { + compatible = "regulator-fixed"; + regulator-name = "1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_2v8: regulator-2v8 { + compatible = "regulator-fixed"; + regulator-name = "2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-fixed"; @@ -182,6 +202,9 @@ clock-names = "xclk"; powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; + AVDD-supply = <®_2v8>; + DVDD-supply = <®_1v5>; + DOVDD-supply = <®_1v8>; port { ov5640_to_parallel: endpoint { @@ -421,8 +444,6 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl_camera_clock: cameraclockgrp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi index ec042648bd98..c6064f4c679b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi @@ -61,7 +61,7 @@ wakeup-source; status = "disabled"; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; st,sample-time = <4>; st,mod-12b = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi index 2f3fd32a1167..113485e3397a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi @@ -8,12 +8,12 @@ / { gpio_keys: gpio-keys { - compatible = "gpio-key"; + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; status = "disabled"; - power { + key-power { label = "Power Button"; gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -29,13 +29,13 @@ user-led1 { gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; user-led2 { gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; + linux,default-trigger = "none"; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi index fe307f49b9e5..9fa5225994e3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi @@ -76,6 +76,7 @@ panel { compatible = "vxt,vl050-8048nt-c01"; backlight = <&backlight>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index f053358bc931..1992dfb53b45 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -72,7 +72,7 @@ default-brightness-level = <50>; }; - i2c_gpio: i2c-gpio { + i2c_gpio: i2c { compatible = "i2c-gpio"; #address-cells = <1>; #size-cells = <0>; @@ -246,7 +246,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -262,6 +261,11 @@ pinctrl-0 = <&pinctrl_etnphy0_int>; interrupt-parent = <&gpio5>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; + /* Energy detect sometimes causes link failures */ + smsc,disable-energy-detect; status = "okay"; }; @@ -272,6 +276,9 @@ pinctrl-0 = <&pinctrl_etnphy1_int>; interrupt-parent = <&gpio4>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; status = "okay"; }; }; @@ -281,7 +288,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi index de4dc7c1a03a..e75dad0f0e23 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi @@ -13,7 +13,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - power { + key-power { label = "Wake-Up"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi index f52f8b5ad8a6..bce6fbf230b3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi @@ -13,7 +13,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - power { + key-power { label = "Wake-Up"; gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_WAKEUP>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts index 5d1cc8a1f555..107b00b9a939 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts @@ -129,7 +129,7 @@ status = "okay"; touchscreen: touchscreen@38 { - compatible ="edt,edt-ft5306"; + compatible = "edt,edt-ft5306"; reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touchscreen>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi index d12fb44aeb14..7ee25b141627 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi @@ -15,7 +15,7 @@ }; gpio_keys: gpio-keys { - compatible = "gpio-key"; + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -79,13 +79,13 @@ user-led1 { label = "yellow"; gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; user-led2 { label = "red"; gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "off"; + linux,default-trigger = "none"; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts index 6159ed70d966..2d9f495660c9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts @@ -33,6 +33,10 @@ status = "okay"; }; +&uart2 { + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 7ee66be8bccb..7acd28658e6f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -270,7 +270,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - touch@48 { + touchscreen@48 { compatible = "ti,tsc2004"; reg = <0x48>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index f2cd95e992e7..56dedd4fb8f0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -23,7 +23,7 @@ pinctrl-0 = <&pinctrl_gpio>; autorepeat; - back { + key-back { label = "Back"; gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 67a3d484bc9f..65fde4f52587 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -146,6 +146,13 @@ ssi-controller = <&sai1>; audio-codec = <&tlv320aic32x4>; audio-asrc = <&asrc>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi index 6dd73290f0c6..152e98cf0c4e 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi @@ -100,23 +100,25 @@ memcpy-bus-width = <32>; }; - spifi: flash-controller@40003000 { + spifi: spi@40003000 { compatible = "nxp,lpc1773-spifi"; reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; reg-names = "spifi", "flash"; interrupts = <30>; clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; clock-names = "spifi", "reg"; + #address-cells = <1>; + #size-cells = <0>; resets = <&rgu 53>; status = "disabled"; }; - mmcsd: mmcsd@40004000 { + mmcsd: mmc@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; interrupts = <6>; - clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; - clock-names = "ciu", "biu"; + clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>; + clock-names = "biu", "ciu"; resets = <&rgu 20>; status = "disabled"; }; @@ -535,3 +537,7 @@ }; }; }; + +&nvic { + arm,num-irq-priority-bits = <3>; +}; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi index 6cf405e9b082..2236901a0031 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi @@ -77,12 +77,13 @@ status = "disabled"; }; - dma: dma@31000000 { + dma: dma-controller@31000000 { compatible = "arm,pl080", "arm,primecell"; reg = <0x31000000 0x1000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk LPC32XX_CLK_DMA>; clock-names = "apb_pclk"; + #dma-cells = <2>; }; usb { @@ -224,8 +225,8 @@ status = "disabled"; }; - sd: sd@20098000 { - compatible = "arm,pl18x", "arm,primecell"; + sd: mmc@20098000 { + compatible = "arm,pl180", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, <13 IRQ_TYPE_LEVEL_HIGH>; @@ -298,11 +299,11 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400e8000 { + mpwm: pwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; reg = <0x400e8000 0x78>; + #pwm-cells = <3>; status = "disabled"; - #pwm-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts index beddaba85393..5ff43c825944 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts @@ -108,14 +108,14 @@ }; ssp_pins: ssp-pins { - ssp1_cs { + ssp1_cs_cfg { pins = "p6_7"; function = "gpio"; bias-pull-up; bias-disable; }; - ssp1_miso_mosi { + ssp1_miso_mosi_cfg { pins = "p1_3", "p1_4"; function = "ssp1"; slew-rate = <1>; @@ -124,7 +124,7 @@ input-schmitt-disable; }; - ssp1_sck { + ssp1_sck_cfg { pins = "pf_4"; function = "ssp1"; slew-rate = <1>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts index 93d0c2e99e7c..18f757c56905 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts @@ -43,50 +43,50 @@ poll-interval = <100>; autorepeat; - button0 { + button-0 { label = "joy:right"; linux,code = <KEY_RIGHT>; gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; }; - button1 { + button-1 { label = "joy:up"; linux,code = <KEY_UP>; gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; }; - button2 { + button-2 { label = "joy:enter"; linux,code = <KEY_ENTER>; gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; }; - button3 { + button-3 { label = "joy:left"; linux,code = <KEY_LEFT>; gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; }; - button4 { + button-4 { label = "joy:down"; linux,code = <KEY_DOWN>; gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; }; - button5 { + button-5 { label = "user:sw3"; linux,code = <KEY_F1>; gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; }; - button6 { + button-6 { label = "user:sw4"; linux,code = <KEY_F2>; gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; }; - button7 { + button-7 { label = "user:sw5"; linux,code = <KEY_F3>; gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; @@ -406,6 +406,9 @@ ext_sram: sram@2,0 { compatible = "mmio-sram"; reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2 0 0x80000>; }; }; }; @@ -451,8 +454,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-rx-bus-width = <4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi index c4422f587055..707d22a219d8 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi @@ -24,16 +24,25 @@ sram0: sram@10000000 { compatible = "mmio-sram"; reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram1: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram2: sram@20000000 { compatible = "mmio-sram"; reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; }; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts index 4aefbc01dfc0..7ccb4c2ca571 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts @@ -60,31 +60,31 @@ poll-interval = <100>; autorepeat; - button0 { + button-0 { label = "joy_enter"; linux,code = <KEY_ENTER>; gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; }; - button1 { + button-1 { label = "joy_left"; linux,code = <KEY_LEFT>; gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; }; - button2 { + button-2 { label = "joy_up"; linux,code = <KEY_UP>; gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; }; - button3 { + button-3 { label = "joy_right"; linux,code = <KEY_RIGHT>; gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; }; - button4 { + button-4 { label = "joy_down"; linux,code = <KEY_DOWN>; gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; @@ -403,7 +403,7 @@ }; ssp0_pins: ssp0-pins { - ssp0_sck_miso_mosi { + ssp0_sck_miso_mosi_cfg { pins = "pf_0", "pf_2", "pf_3"; function = "ssp0"; slew-rate = <1>; @@ -412,7 +412,7 @@ input-schmitt-disable; }; - ssp0_ssel { + ssp0_ssel_cfg { pins = "pf_1"; function = "ssp0"; bias-pull-up; @@ -452,12 +452,12 @@ }; usb0_pins: usb0-pins { - usb0_pwr_enable { + usb0_pwr_enable_cfg { pins = "p2_3"; function = "usb0"; }; - usb0_pwr_fault { + usb0_pwr_fault_cfg { pins = "p8_0"; function = "usb0"; bias-disable; @@ -582,8 +582,9 @@ pinctrl-names = "default"; pinctrl-0 = <&spifi_pins>; - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-cpol; spi-cpha; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts index 846afb8ccbf1..d18f2b2caf68 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts @@ -63,6 +63,7 @@ panel: panel { compatible = "innolux,at070tn92"; + power-supply = <&vcc>; port { panel_input: endpoint { @@ -543,7 +544,7 @@ pinctrl-0 = <&enet_rmii_pins>; phy-handle = <&phy1>; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; @@ -569,8 +570,9 @@ pinctrl-0 = <&spifi_pins>; /* Atmel AT25DF321A */ - flash { + flash@0 { compatible = "jedec,spi-nor"; + reg = <0>; spi-max-frequency = <51000000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi index 72f12db8d53a..d138ee7869ff 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi @@ -24,16 +24,25 @@ sram0: sram@10000000 { compatible = "mmio-sram"; reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram1: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; sram2: sram@20000000 { compatible = "mmio-sram"; reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + #address-cells = <1>; + #size-cells = <1>; + ranges; }; }; }; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts index f1acb97aee69..a880875ced83 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts @@ -66,7 +66,7 @@ bus-num = <0>; status = "okay"; - dspiflash: at45db021d@0 { + dspiflash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; @@ -187,7 +187,7 @@ <0x3 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; @@ -211,8 +211,8 @@ device-width = <1>; ranges = <0 3 0 0x100>; - mdio-mux-emi1 { - compatible = "mdio-mux-mmioreg"; + mdio-mux@54 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; mdio-parent-bus = <&mdio0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso index 146d45601f69..66cedc2dcd96 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso @@ -36,7 +36,7 @@ #size-cells = <0>; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&pca9554_0>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso index db66831f31af..8b9455bffbd2 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso @@ -36,7 +36,7 @@ #size-cells = <0>; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&pca9554_0>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi index 271001eb5ad7..167559521ae1 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi @@ -66,8 +66,6 @@ qflash0: flash@0 { compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <20000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts index 1ea32fff4120..da76566f3510 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts @@ -40,8 +40,6 @@ /* ADG704BRMZ 1:4 SPI mux/demux */ sja1105: ethernet-switch@1 { reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; compatible = "nxp,sja1105t"; /* 12 MHz */ spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts index f5c03871b205..38281b904301 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts @@ -151,7 +151,7 @@ ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; status = "okay"; - nor@0,0 { + flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index e86998ca77d6..e0b9ea6dd510 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -93,10 +93,9 @@ compatible = "fsl,qoriq-memory-controller"; reg = <0x0 0x1080000 0x0 0x1000>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - big-endian; }; - gic: interrupt-controller@1400000 { + gic: interrupt-controller@1401000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -155,14 +154,13 @@ status = "disabled"; }; - esdhc: esdhc@1560000 { + esdhc: mmc@1560000 { compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <0>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; - big-endian; bus-width = <4>; status = "disabled"; }; @@ -611,11 +609,10 @@ }; wdog0: watchdog@2ad0000 { - compatible = "fsl,imx21-wdt"; + compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; - clock-names = "wdog-en"; big-endian; }; @@ -627,9 +624,9 @@ clocks = <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 47>, - <&edma0 1 46>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 46>, + <&edma0 1 47>; status = "disabled"; }; @@ -641,9 +638,9 @@ clocks = <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; - dma-names = "tx", "rx"; - dmas = <&edma0 1 45>, - <&edma0 1 44>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 44>, + <&edma0 1 45>; status = "disabled"; }; @@ -707,6 +704,7 @@ enet0: ethernet@2d10000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d10000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -717,8 +715,6 @@ dma-coherent; queue-group@2d10000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d10000 0x0 0x1000>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, @@ -726,8 +722,6 @@ }; queue-group@2d14000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d14000 0x0 0x1000>; interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -737,6 +731,7 @@ enet1: ethernet@2d50000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d50000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -746,8 +741,6 @@ dma-coherent; queue-group@2d50000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d50000 0x0 0x1000>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, @@ -755,8 +748,6 @@ }; queue-group@2d54000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d54000 0x0 0x1000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, @@ -766,6 +757,7 @@ enet2: ethernet@2d90000 { compatible = "fsl,etsec2"; + reg = <0x0 0x2d90000 0x0 0x5000>; device_type = "network"; #address-cells = <2>; #size-cells = <2>; @@ -775,8 +767,6 @@ dma-coherent; queue-group@2d90000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d90000 0x0 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, @@ -784,8 +774,6 @@ }; queue-group@2d94000 { - #address-cells = <2>; - #size-cells = <2>; reg = <0x0 0x2d94000 0x0 0x1000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, @@ -810,7 +798,6 @@ snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - snps,host-vbus-glitches; }; pcie@3400000 { @@ -917,7 +904,7 @@ ranges = <0x0 0x0 0x10010000 0x10000>; }; - qdma: dma-controller@8390000 { + qdma: dma-controller@8388000 { compatible = "fsl,ls1021a-qdma"; reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ <0x0 0x8389000 0x0 0x1000>, /* Status regs */ @@ -937,17 +924,15 @@ big-endian; }; - rcpm: power-controller@1ee2140 { + rcpm: wakeup-controller@1ee2140 { compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1ee2140 0x0 0x8>; #fsl,rcpm-wakeup-cells = <2>; - #power-domain-cells = <0>; }; - ftm_alarm0: timer0@29d0000 { + ftm_alarm0: rtc@29d0000 { compatible = "fsl,ls1021a-ftm-alarm"; reg = <0x0 0x29d0000 0x0 0x10000>; - reg-names = "ftm"; fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; big-endian; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index 029f49be40e3..be6147239362 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -412,13 +412,13 @@ }; &iomuxc { - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { + pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp { fsl,pins = < VF610_PAD_PTE27__GPIO_132 0x33e2 >; }; - pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp { fsl,pins = < VF610_PAD_PTB22__GPIO_44 0x33e2 VF610_PAD_PTB21__GPIO_43 0x33e2 @@ -428,7 +428,7 @@ >; }; - pinctrl_mdio_mux: pinctrl-mdio-mux { + pinctrl_mdio_mux: pinctrl-mdio-mux-grp { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 VF610_PAD_PTA19__GPIO_9 0x31c2 @@ -437,7 +437,7 @@ >; }; - pinctrl_pca9554_22: pinctrl-pca95540-22 { + pinctrl_pca9554_22: pinctrl-pca95540-22-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi index ce5e52896b19..91cc496ffb90 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi @@ -335,7 +335,7 @@ >; }; - pinctrl_gpio_spi0: pinctrl-gpio-spi0 { + pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp { fsl,pins = < VF610_PAD_PTB22__GPIO_44 0x33e2 VF610_PAD_PTB21__GPIO_43 0x33e2 @@ -345,19 +345,19 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp { fsl,pins = < VF610_PAD_PTB5__GPIO_27 0x219d >; }; - pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp { fsl,pins = < VF610_PAD_PTB4__GPIO_26 0x219d >; }; - pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 >; @@ -370,7 +370,7 @@ >; }; - pinctrl_i2c0_gpio: i2c0grp-gpio { + pinctrl_i2c0_gpio: i2c0-gpio-grp { fsl,pins = < VF610_PAD_PTB14__GPIO_36 0x31c2 VF610_PAD_PTB15__GPIO_37 0x31c2 @@ -392,7 +392,7 @@ >; }; - pinctrl_leds_debug: pinctrl-leds-debug { + pinctrl_leds_debug: pinctrl-leds-debug-grp { fsl,pins = < VF610_PAD_PTD20__GPIO_74 0x31c2 >; @@ -436,7 +436,7 @@ >; }; - pinctrl_usb_vbus: pinctrl-usb-vbus { + pinctrl_usb_vbus: pinctrl-usb-vbus-grp { fsl,pins = < VF610_PAD_PTA16__GPIO_6 0x31c2 >; diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi index 2bb331a87721..648d219e1d0e 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi @@ -55,3 +55,7 @@ &mscm_ir { interrupt-parent = <&nvic>; }; + +&nvic { + arm,num-irq-priority-bits = <4>; +}; diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi index 124003c0be26..568d81807c81 100644 --- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi @@ -304,7 +304,7 @@ status = "disabled"; }; - iomuxc: iomuxc@40048000 { + iomuxc: pinctrl@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; }; @@ -682,7 +682,7 @@ status = "disabled"; }; - nfc: nand@400e0000 { + nfc: nand-controller@400e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-nfc"; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index e875b5d25e84..c7873dcef154 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8926-samsung-matisselte.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ + qcom-msm8960-sony-huashan.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ qcom-msm8974-samsung-hlte.dtb \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi index 058962af3005..535cb6a2543f 100644 --- a/arch/arm/boot/dts/qcom/pm8921.dtsi +++ b/arch/arm/boot/dts/qcom/pm8921.dtsi @@ -17,6 +17,12 @@ pull-up; }; + pm8921_vibrator: vibrator@4a { + compatible = "qcom,pm8921-vib"; + reg = <0x4a>; + status = "disabled"; + }; + pm8921_mpps: mpps@50 { compatible = "qcom,pm8921-mpp", "qcom,ssbi-mpp"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts index c187c6875bc6..fdbbc1389297 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts @@ -34,7 +34,7 @@ #size-cells = <1>; ranges; - ramoops@88d00000{ + ramoops@88d00000 { compatible = "ramoops"; reg = <0x88d00000 0x100000>; record-size = <0x20000>; @@ -326,8 +326,8 @@ */ pm8921_s4: s4 { regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 17e506ca2438..09062b2ad8ba 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -342,6 +342,7 @@ intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x02000000 0x1000>, <0x02002000 0x1000>; @@ -1350,10 +1351,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc PCIE_A_CLK>, <&gcc PCIE_H_CLK>, <&gcc PCIE_PHY_REF_CLK>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index f77542fb3d4f..8eeaab1c0be1 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -175,6 +175,7 @@ intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; @@ -428,10 +429,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_AHB_CLK>, <&gcc GCC_PCIE_AXI_M_CLK>, <&gcc GCC_PCIE_AXI_S_CLK>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index 96e973501535..adedcc6da1da 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -527,6 +527,7 @@ intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x02000000 0x1000>, <0x02002000 0x1000>; @@ -1076,10 +1077,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc PCIE_A_CLK>, <&gcc PCIE_H_CLK>, @@ -1137,10 +1138,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc PCIE_1_A_CLK>, <&gcc PCIE_1_H_CLK>, @@ -1198,10 +1199,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc PCIE_2_A_CLK>, <&gcc PCIE_2_H_CLK>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts index 2ecc5983d365..08b50dc63923 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts @@ -144,6 +144,8 @@ pinctrl-0 = <&tsp_int_default>; pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi index 4fa982771288..f18753e9f5ef 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi @@ -18,4 +18,44 @@ bias-bus-hold; }; }; + + sdcc3_default_state: sdcc3-default-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + sdcc3_sleep_state: sdcc3-sleep-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc3_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index af6cc6393d74..49d117ea033a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -71,6 +71,11 @@ &sdcc3 { vmmc-supply = <&pm8921_l6>; vqmmc-supply = <&pm8921_l7>; + + pinctrl-0 = <&sdcc3_default_state>; + pinctrl-1 = <&sdcc3_sleep_state>; + pinctrl-names = "default", "sleep"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts new file mode 100644 index 000000000000..f2f59fc8b9b6 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com> + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> + +#include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" + +/ { + model = "Sony Xperia SP"; + compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960"; + chassis-type = "handset"; + + aliases { + serial0 = &gsbi8_serial; + mmc0 = &sdcc1; /* SDCC1 eMMC slot */ + mmc1 = &sdcc3; /* SDCC3 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + linux,code = <KEY_VOLUMEUP>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>; + debounce-interval = <10>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&gsbi8 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi8_serial { + status = "okay"; +}; + +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_gpio { + keypad_default_state: keypad-default-state { + keypad-sense-pins { + pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + power-source = <PM8921_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>; + }; + + keypad-drive-pins { + pins = "gpio9", "gpio10"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + drive-open-drain; + output-low; + power-source = <PM8921_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + }; +}; + +&pm8921_keypad { + linux,keymap = < + MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(1, 1, KEY_CAMERA) + >; + keypad,num-rows = <2>; + keypad,num-columns = <5>; + + pinctrl-0 = <&keypad_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + vdd_l29-supply = <&pm8921_s8>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + status = "okay"; +}; + +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + vqmmc-supply = <&pm8921_l7>; + + pinctrl-0 = <&sdcc3_default_state>; + pinctrl-1 = <&sdcc3_sleep_state>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 203f0b69b353..6e272d5345a8 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -322,6 +322,8 @@ syscon-tcsr = <&tcsr>; + status = "disabled"; + gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, @@ -333,6 +335,34 @@ }; }; + gsbi8: gsbi@1a000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <8>; + reg = <0x1a000000 0x100>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi8_serial: serial@1a040000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a040000 0x1000>, + <0x1a000000 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI8_UART_CLK>, + <&gcc GSBI8_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; @@ -417,6 +447,8 @@ #size-cells = <1>; ranges; + status = "disabled"; + gsbi1_spi: spi@16080000 { compatible = "qcom,spi-qup-v1.1.1"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts index 903bb4d12513..b7a1367d3470 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts @@ -50,6 +50,34 @@ }; }; + i2c-touchkey { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&i2c_touchkey_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "cypress,midas-touchkey"; + reg = <0x20>; + + interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&touchkey_pin>; + pinctrl-names = "default"; + + vcc-supply = <&pm8941_lvs3>; + vdd-supply = <&pm8941_l13>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + touch_ldo: regulator-touch { compatible = "regulator-fixed"; regulator-name = "touch-ldo"; @@ -149,6 +177,14 @@ power-source = <PM8941_GPIO_S3>; qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; + + touchkey_pin: touchkey-int-state { + pins = "gpio29"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; }; &remoteproc_adsp { @@ -332,6 +368,9 @@ regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; }; @@ -378,6 +417,12 @@ drive-strength = <8>; bias-disable; }; + + i2c_touchkey_pins: i2c-touchkey-state { + pins = "gpio95", "gpio96"; + function = "gpio"; + bias-pull-up; + }; }; &usb { diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 20fdae9825e0..05b79281df57 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -340,10 +340,10 @@ "msi8"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_PIPE_CLK>, <&gcc GCC_PCIE_AUX_CLK>, @@ -707,6 +707,7 @@ compatible = "qcom,msm-qgic2"; interrupt-controller; interrupt-parent = <&intc>; + #address-cells = <0>; #interrupt-cells = <3>; reg = <0x17800000 0x1000>, <0x17802000 0x1000>; diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts index c81840dfb7da..3c3756509714 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts @@ -203,6 +203,7 @@ }; &ostm0 { + bootph-all; status = "okay"; }; @@ -258,6 +259,7 @@ }; scif2_pins: serial2 { + bootph-all; /* P3_0 as TxD2; P3_2 as RxD2 */ pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>; }; @@ -286,7 +288,7 @@ &scif2 { pinctrl-names = "default"; pinctrl-0 = <&scif2_pins>; - + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts index 9d29861f23f1..23ddec217685 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts @@ -59,6 +59,7 @@ &pinctrl { scif2_pins: serial2 { + bootph-all; /* P6_2 as RxD2; P6_3 as TxD2 */ pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>; }; @@ -99,6 +100,7 @@ }; &ostm0 { + bootph-all; status = "okay"; }; @@ -109,7 +111,7 @@ &scif2 { pinctrl-names = "default"; pinctrl-0 = <&scif2_pins>; - + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts index 25c6d0c78828..91178fb9e721 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts @@ -199,6 +199,7 @@ /* Serial Console */ scif2_pins: serial2 { + bootph-all; pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ <RZA1_PINMUX(3, 2, 4)>; /* RxD2 */ }; @@ -264,6 +265,7 @@ }; &ostm0 { + bootph-all; status = "okay"; }; @@ -278,6 +280,7 @@ &scif2 { pinctrl-names = "default"; pinctrl-0 = <&scif2_pins>; + bootph-all; status = "okay"; }; diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi index 1a866dbaf5e9..a1e4e9ac8f62 100644 --- a/arch/arm/boot/dts/renesas/r7s72100.dtsi +++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi @@ -41,6 +41,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0x18000000>; + bootph-all; }; cpus { @@ -107,6 +108,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + bootph-all; L2: cache-controller@3ffff000 { compatible = "arm,pl310-cache"; @@ -557,6 +559,7 @@ pinctrl: pinctrl@fcfe3000 { compatible = "renesas,r7s72100-ports"; + bootph-all; reg = <0xfcfe3000 0x4230>; diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index f518eadd8b9c..81b3c5d74e9b 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -289,7 +289,7 @@ }; can0_pins: can0 { - groups = "can0_data"; + groups = "can0_data_b"; function = "can0"; }; diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts index 21f824b09191..decbf2726ec4 100644 --- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts +++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts @@ -272,7 +272,7 @@ phy-mode = "rmii"; phy-handle = <&phy0>; assigned-clocks = <&cru SCLK_MAC_SRC>; - assigned-clock-rates= <50000000>; + assigned-clock-rates = <50000000>; pinctrl-names = "default"; pinctrl-0 = <&rmii_pins>; status = "okay"; diff --git a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts index dd42f8d31f70..a5f5c6d38f80 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts @@ -78,6 +78,21 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "HDMI"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; }; &cpu0 { @@ -130,6 +145,8 @@ &hdmi { ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; status = "okay"; }; @@ -283,6 +300,11 @@ status = "okay"; }; +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + &io_domains { status = "okay"; diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts index c13829d32c32..8a92700349b4 100644 --- a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts +++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts @@ -250,9 +250,9 @@ &i2s0 { /delete-property/ pinctrl-0; rockchip,trcm-sync-rx-only; - pinctrl-0 = <&i2s0m0_sclk_rx>, - <&i2s0m0_lrck_rx>, - <&i2s0m0_sdi0>; + pinctrl-0 = <&i2s0m0_sclk_rx>, + <&i2s0m0_lrck_rx>, + <&i2s0m0_sdi0>; pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts index bb623726ef1e..6af1f64c984b 100644 --- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts @@ -422,6 +422,43 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + srom_ctl: srom-ctl-pins { + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + srom_ebi: srom-ebi-pins { + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&sromc { + pinctrl-names = "default"; + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; + + ethernet@1,0 { + compatible = "smsc,lan9115"; + reg = <1 0 0x100>; + phy-mode = "mii"; + smsc,irq-push-pull; + interrupt-parent = <&gpx0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + reg-io-width = <2>; + + samsung,srom-page-mode; + samsung,srom-timing = <9 12 1 6 1 1>; + }; }; &usbdrd { diff --git a/arch/arm/boot/dts/samsung/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi index b9e7c4938818..4616794b19e8 100644 --- a/arch/arm/boot/dts/samsung/exynos5250.dtsi +++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi @@ -1214,6 +1214,15 @@ dma-names = "rx", "tx"; }; +&sromc { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000>, + <1 0 0x05000000 0x20000>, + <2 0 0x06000000 0x20000>, + <3 0 0x07000000 0x20000>; +}; + &sss { clocks = <&clock CLK_SSS>; clock-names = "secss"; diff --git a/arch/arm/boot/dts/samsung/exynos5410.dtsi b/arch/arm/boot/dts/samsung/exynos5410.dtsi index 546035e78f40..350bc8d6aa5c 100644 --- a/arch/arm/boot/dts/samsung/exynos5410.dtsi +++ b/arch/arm/boot/dts/samsung/exynos5410.dtsi @@ -372,10 +372,10 @@ &sromc { #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 0x04000000 0x20000 - 1 0 0x05000000 0x20000 - 2 0 0x06000000 0x20000 - 3 0 0x07000000 0x20000>; + ranges = <0 0 0x04000000 0x20000>, + <1 0 0x05000000 0x20000>, + <2 0 0x06000000 0x20000>, + <3 0 0x07000000 0x20000>; }; &trng { diff --git a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts index 7e08a459f7d8..ab910e1b5e6a 100644 --- a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts @@ -43,7 +43,7 @@ compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; - port@0 { + port { spdif_tx: endpoint { remote-endpoint = <&spdif_hiecout1>; }; @@ -54,7 +54,7 @@ compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; - port@0 { + port { comp_spdif_tx: endpoint { remote-endpoint = <&comp_spdif_hiecout1>; }; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 66d4f96da5dd..e906bf6ba004 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -13,8 +13,6 @@ dtb-$(CONFIG_ARCH_SPEAR3XX) += \ dtb-$(CONFIG_ARCH_SPEAR6XX) += \ spear600-evb.dtb dtb-$(CONFIG_ARCH_STI) += \ - stih407-b2120.dtb \ - stih410-b2120.dtb \ stih410-b2260.dtb \ stih418-b2199.dtb \ stih418-b2264.dtb diff --git a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts index c905c2643a12..7c7a53604204 100644 --- a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts @@ -23,7 +23,7 @@ gpio3: gpio@101e7000 { /* This hog will bias the MMC/SD card detect line */ - mmcsd-gpio { + mmcsd-hog { gpio-hog; gpios = <16 0x0>; output-low; @@ -117,8 +117,8 @@ /* GPIO I2C connected to the USB portions of the STw4811 only */ gpio-i2c { compatible = "i2c-gpio"; - gpios = <&gpio2 10 0>, /* sda */ - <&gpio2 9 0>; /* scl */ + sda-gpios = <&gpio2 10 0>; + scl-gpios = <&gpio2 9 0>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts index 404d4ea9347b..8f1780d560ff 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts @@ -383,8 +383,9 @@ /* BT_WAKE on GPIO199 */ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; /* BT_HOST_WAKE on GPIO97 */ - /* FIXME: convert to interrupt */ - host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; /* BT_RST_N on GPIO209 */ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index 40b0d92dfb15..9f58a3c2d06d 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -479,8 +479,9 @@ /* BT_WAKE on GPIO199 */ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; /* BT_HOST_WAKE on GPIO97 */ - /* FIXME: convert to interrupt */ - host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; /* BT_RST_N on GPIO209 */ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts index 229f7c32103c..64562a3a262c 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts @@ -481,8 +481,9 @@ /* BT_WAKE on GPIO199 */ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; /* BT_HOST_WAKE on GPIO97 */ - /* FIXME: convert to interrupt */ - host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "host-wakeup"; /* BT_RST_N on GPIO209 */ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/stih407-b2120.dts b/arch/arm/boot/dts/st/stih407-b2120.dts deleted file mode 100644 index 9c79982ee7ba..000000000000 --- a/arch/arm/boot/dts/st/stih407-b2120.dts +++ /dev/null @@ -1,27 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - */ -/dts-v1/; -#include "stih407.dtsi" -#include "stihxxx-b2120.dtsi" -/ { - model = "STiH407 B2120"; - compatible = "st,stih407-b2120", "st,stih407"; - - chosen { - stdout-path = &sbc_serial0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - aliases { - serial0 = &sbc_serial0; - ethernet0 = ðernet0; - }; - -}; diff --git a/arch/arm/boot/dts/st/stih407-clock.dtsi b/arch/arm/boot/dts/st/stih407-clock.dtsi deleted file mode 100644 index 350bcfcf498b..000000000000 --- a/arch/arm/boot/dts/st/stih407-clock.dtsi +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014 STMicroelectronics R&D Limited - */ -#include <dt-bindings/clock/stih407-clks.h> -/ { - /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - clk_tmdsout_hdmi: clk-tmdsout-hdmi { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * A9 PLL. - */ - clockgen-a9@92b0000 { - compatible = "st,clkgen-c32"; - reg = <0x92b0000 0x10000>; - - clockgen_a9_pll: clockgen-a9-pll { - #clock-cells = <1>; - compatible = "st,stih407-clkgen-plla9"; - - clocks = <&clk_sysin>; - }; - - clk_m_a9: clk-m-a9 { - #clock-cells = <0>; - compatible = "st,stih407-clkgen-a9-mux"; - - clocks = <&clockgen_a9_pll 0>, - <&clockgen_a9_pll 0>, - <&clk_s_c0_flexgen 13>, - <&clk_m_a9_ext2f_div2>; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - }; - }; - - clockgen-a@90ff000 { - compatible = "st,clkgen-c32"; - reg = <0x90ff000 0x1000>; - - clk_s_a0_pll: clk-s-a0-pll { - #clock-cells = <1>; - compatible = "st,clkgen-pll0-a0"; - - clocks = <&clk_sysin>; - }; - - clk_s_a0_flexgen: clk-s-a0-flexgen { - compatible = "st,flexgen", "st,flexgen-stih407-a0"; - - #clock-cells = <1>; - - clocks = <&clk_s_a0_pll 0>, - <&clk_sysin>; - }; - }; - - clk_s_c0: clockgen-c@9103000 { - compatible = "st,clkgen-c32"; - reg = <0x9103000 0x1000>; - - clk_s_c0_pll0: clk-s-c0-pll0 { - #clock-cells = <1>; - compatible = "st,clkgen-pll0-c0"; - - clocks = <&clk_sysin>; - }; - - clk_s_c0_pll1: clk-s-c0-pll1 { - #clock-cells = <1>; - compatible = "st,clkgen-pll1-c0"; - - clocks = <&clk_sysin>; - }; - - clk_s_c0_quadfs: clk-s-c0-quadfs { - #clock-cells = <1>; - compatible = "st,quadfs-pll"; - - clocks = <&clk_sysin>; - }; - - clk_s_c0_flexgen: clk-s-c0-flexgen { - #clock-cells = <1>; - compatible = "st,flexgen", "st,flexgen-stih407-c0"; - - clocks = <&clk_s_c0_pll0 0>, - <&clk_s_c0_pll1 0>, - <&clk_s_c0_quadfs 0>, - <&clk_s_c0_quadfs 1>, - <&clk_s_c0_quadfs 2>, - <&clk_s_c0_quadfs 3>, - <&clk_sysin>; - - /* - * ARM Peripheral clock for timers - */ - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - - clocks = <&clk_s_c0_flexgen 13>; - - clock-output-names = "clk-m-a9-ext2f-div2"; - - clock-div = <2>; - clock-mult = <1>; - }; - }; - }; - - clockgen-d0@9104000 { - compatible = "st,clkgen-c32"; - reg = <0x9104000 0x1000>; - - clk_s_d0_quadfs: clk-s-d0-quadfs { - #clock-cells = <1>; - compatible = "st,quadfs-d0"; - - clocks = <&clk_sysin>; - }; - - clk_s_d0_flexgen: clk-s-d0-flexgen { - #clock-cells = <1>; - compatible = "st,flexgen", "st,flexgen-stih407-d0"; - - clocks = <&clk_s_d0_quadfs 0>, - <&clk_s_d0_quadfs 1>, - <&clk_s_d0_quadfs 2>, - <&clk_s_d0_quadfs 3>, - <&clk_sysin>; - }; - }; - - clockgen-d2@9106000 { - compatible = "st,clkgen-c32"; - reg = <0x9106000 0x1000>; - - clk_s_d2_quadfs: clk-s-d2-quadfs { - #clock-cells = <1>; - compatible = "st,quadfs-d2"; - - clocks = <&clk_sysin>; - }; - - clk_s_d2_flexgen: clk-s-d2-flexgen { - #clock-cells = <1>; - compatible = "st,flexgen", "st,flexgen-stih407-d2"; - - clocks = <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>, - <&clk_s_d2_quadfs 2>, - <&clk_s_d2_quadfs 3>, - <&clk_sysin>, - <&clk_sysin>, - <&clk_tmdsout_hdmi>; - }; - }; - - clockgen-d3@9107000 { - compatible = "st,clkgen-c32"; - reg = <0x9107000 0x1000>; - - clk_s_d3_quadfs: clk-s-d3-quadfs { - #clock-cells = <1>; - compatible = "st,quadfs-d3"; - - clocks = <&clk_sysin>; - }; - - clk_s_d3_flexgen: clk-s-d3-flexgen { - #clock-cells = <1>; - compatible = "st,flexgen", "st,flexgen-stih407-d3"; - - clocks = <&clk_s_d3_quadfs 0>, - <&clk_s_d3_quadfs 1>, - <&clk_s_d3_quadfs 2>, - <&clk_s_d3_quadfs 3>, - <&clk_sysin>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi index 35a55aef7f4b..3e6a0542e3ae 100644 --- a/arch/arm/boot/dts/st/stih407-family.dtsi +++ b/arch/arm/boot/dts/st/stih407-family.dtsi @@ -669,7 +669,7 @@ interrupt-names = "hostc"; phys = <&phy_port0 PHY_TYPE_SATA>; - phy-names = "ahci_phy"; + phy-names = "sata-phy"; resets = <&powerdown STIH407_SATA0_POWERDOWN>, <&softreset STIH407_SATA0_SOFTRESET>, @@ -692,7 +692,7 @@ interrupt-names = "hostc"; phys = <&phy_port1 PHY_TYPE_SATA>; - phy-names = "ahci_phy"; + phy-names = "sata-phy"; resets = <&powerdown STIH407_SATA1_POWERDOWN>, <&softreset STIH407_SATA1_SOFTRESET>, diff --git a/arch/arm/boot/dts/st/stih407.dtsi b/arch/arm/boot/dts/st/stih407.dtsi deleted file mode 100644 index aca43d2bdaad..000000000000 --- a/arch/arm/boot/dts/st/stih407.dtsi +++ /dev/null @@ -1,145 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015 STMicroelectronics Limited. - * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org> - */ -#include "stih407-clock.dtsi" -#include "stih407-family.dtsi" -#include <dt-bindings/gpio/gpio.h> -/ { - soc { - sti-display-subsystem@0 { - compatible = "st,sti-display-subsystem"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>, - <&clk_s_c0_pll1 0>, - <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_c0_flexgen CLK_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, - <&clk_s_d2_flexgen CLK_PIX_GDP1>, - <&clk_s_d2_flexgen CLK_PIX_GDP2>, - <&clk_s_d2_flexgen CLK_PIX_GDP3>, - <&clk_s_d2_flexgen CLK_PIX_GDP4>; - - assigned-clock-parents = <0>, - <0>, - <0>, - <&clk_s_c0_pll1 0>, - <&clk_s_c0_pll1 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 0>; - - assigned-clock-rates = <297000000>, - <108000000>, - <0>, - <400000000>, - <400000000>; - - ranges; - - sti-compositor@9d11000 { - compatible = "st,stih407-compositor"; - reg = <0x9d11000 0x1000>; - - clock-names = "compo_main", - "compo_aux", - "pix_main", - "pix_aux", - "pix_gdp1", - "pix_gdp2", - "pix_gdp3", - "pix_gdp4", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, - <&clk_s_d2_flexgen CLK_PIX_GDP1>, - <&clk_s_d2_flexgen CLK_PIX_GDP2>, - <&clk_s_d2_flexgen CLK_PIX_GDP3>, - <&clk_s_d2_flexgen CLK_PIX_GDP4>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - reset-names = "compo-main", "compo-aux"; - resets = <&softreset STIH407_COMPO_SOFTRESET>, - <&softreset STIH407_COMPO_SOFTRESET>; - st,vtg = <&vtg_main>, <&vtg_aux>; - }; - - sti-tvout@8d08000 { - compatible = "st,stih407-tvout"; - reg = <0x8d08000 0x1000>; - reg-names = "tvout-reg"; - reset-names = "tvout"; - resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; - #address-cells = <1>; - #size-cells = <1>; - assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>; - - assigned-clock-parents = <&clk_s_d2_quadfs 0>, - <&clk_tmdsout_hdmi>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d0_quadfs 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 0>; - }; - - sti_hdmi: sti-hdmi@8d04000 { - compatible = "st,stih407-hdmi"; - reg = <0x8d04000 0x1000>; - reg-names = "hdmi-reg"; - #sound-dai-cells = <0>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irq"; - clock-names = "pix", - "tmds", - "phy", - "audio", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; - reset-names = "hdmi"; - resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; - ddc = <&hdmiddc>; - }; - - sti-hda@8d02000 { - compatible = "st,stih407-hda"; - reg = <0x8d02000 0x400>, <0x92b0120 0x4>; - reg-names = "hda-reg", "video-dacs-ctrl"; - clock-names = "pix", - "hddac", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/st/stih410-b2120.dts b/arch/arm/boot/dts/st/stih410-b2120.dts deleted file mode 100644 index 538ff98ca1b1..000000000000 --- a/arch/arm/boot/dts/st/stih410-b2120.dts +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Peter Griffin <peter.griffin@linaro.org> - */ -/dts-v1/; -#include "stih410.dtsi" -#include "stihxxx-b2120.dtsi" -/ { - model = "STiH410 B2120"; - compatible = "st,stih410-b2120", "st,stih410"; - - chosen { - stdout-path = &sbc_serial0; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - aliases { - serial0 = &sbc_serial0; - ethernet0 = ðernet0; - }; - - usb2_picophy1: phy2 { - status = "okay"; - }; - - usb2_picophy2: phy3 { - status = "okay"; - }; - - soc { - - mmc0: sdhci@9060000 { - max-frequency = <200000000>; - sd-uhs-sdr50; - sd-uhs-sdr104; - sd-uhs-ddr50; - }; - - ohci0: usb@9a03c00 { - status = "okay"; - }; - - ehci0: usb@9a03e00 { - status = "okay"; - }; - - ohci1: usb@9a83c00 { - status = "okay"; - }; - - ehci1: usb@9a83e00 { - status = "okay"; - }; - - sti-display-subsystem@0 { - sti-hda@8d02000 { - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi b/arch/arm/boot/dts/st/stihxxx-b2120.dtsi deleted file mode 100644 index 8d9a2dfa76f1..000000000000 --- a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi +++ /dev/null @@ -1,206 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> - */ -#include <dt-bindings/clock/stih407-clks.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/media/c8sectpfe.h> -/ { - leds { - compatible = "gpio-leds"; - led-red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - led-green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - sound: sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "STI-B2120"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - simple-audio-card,dai-link@0 { - reg = <0>; - /* HDMI */ - format = "i2s"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player0>; - }; - - codec { - sound-dai = <&sti_hdmi>; - }; - }; - - simple-audio-card,dai-link@1 { - reg = <1>; - /* DAC */ - format = "i2s"; - mclk-fs = <256>; - frame-inversion; - cpu { - sound-dai = <&sti_uni_player2>; - }; - - codec { - sound-dai = <&sti_sasg_codec 1>; - }; - }; - - simple-audio-card,dai-link@2 { - reg = <2>; - /* SPDIF */ - format = "left_j"; - mclk-fs = <128>; - cpu { - sound-dai = <&sti_uni_player3>; - }; - - codec { - sound-dai = <&sti_sasg_codec 0>; - }; - }; - }; - - miphy28lp_phy: miphy28lp { - - phy_port0: port@9b22000 { - st,osc-rdy; - }; - - phy_port1: port@9b2a000 { - st,osc-force-ext; - }; - }; - - soc { - sbc_serial0: serial@9530000 { - status = "okay"; - }; - - pwm0: pwm@9810000 { - status = "okay"; - }; - - pwm1: pwm@9510000 { - status = "okay"; - }; - - ssc2: i2c@9842000 { - status = "okay"; - clock-frequency = <100000>; - st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <5>; - }; - - ssc3: i2c@9843000 { - status = "okay"; - clock-frequency = <100000>; - st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <5>; - }; - - i2c@9844000 { - status = "okay"; - }; - - i2c@9845000 { - status = "okay"; - }; - - i2c@9540000 { - status = "okay"; - }; - - mmc0: sdhci@9060000 { - non-removable; - status = "okay"; - }; - - mmc1: sdhci@9080000 { - status = "okay"; - }; - - /* SSC11 to HDMI */ - hdmiddc: i2c@9541000 { - status = "okay"; - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - st,i2c-min-scl-pulse-width-us = <0>; - st,i2c-min-sda-pulse-width-us = <5>; - }; - - st_dwc3: dwc3@8f94000 { - status = "okay"; - }; - - ethernet0: dwmac@9630000 { - st,tx-retime-src = "clkgen"; - status = "okay"; - phy-mode = "rgmii"; - fixed-link = <0 1 1000 0 0>; - }; - - demux@8a20000 { - compatible = "st,stih407-c8sectpfe"; - status = "okay"; - reg = <0x08a20000 0x10000>, - <0x08a00000 0x4000>; - reg-names = "c8sectpfe", "c8sectpfe-ram"; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "c8sectpfe-error-irq", - "c8sectpfe-idle-irq"; - pinctrl-0 = <&pinctrl_tsin0_serial>; - pinctrl-1 = <&pinctrl_tsin0_parallel>; - pinctrl-2 = <&pinctrl_tsin3_serial>; - pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; - pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; - pinctrl-names = "tsin0-serial", - "tsin0-parallel", - "tsin3-serial", - "tsin4-serial", - "tsin5-serial"; - clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; - clock-names = "c8sectpfe"; - - /* tsin0 is TSA on NIMA */ - tsin0: port { - tsin-num = <0>; - serial-not-parallel; - i2c-bus = <&ssc2>; - reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>; - dvb-card = <STV0367_TDA18212_NIMA_1>; - }; - }; - - sti_uni_player0: sti-uni-player@8d80000 { - status = "okay"; - }; - - sti_uni_player2: sti-uni-player@8d82000 { - status = "okay"; - }; - - sti_uni_player3: sti-uni-player@8d85000 { - status = "okay"; - }; - - syscfg_core: core-syscfg@92b0000 { - sti_sasg_codec: sti-sasg-codec { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spdif_out>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index ace9495b9b06..fd730aa37c22 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -954,6 +954,13 @@ status = "disabled"; }; + hdp: pinctrl@5002a000 { + compatible = "st,stm32mp131-hdp"; + reg = <0x5002a000 0x400>; + clocks = <&rcc HDP>; + status = "disabled"; + }; + mdma: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; @@ -1602,11 +1609,13 @@ "mac-clk-tx", "mac-clk-rx", "ethstp", + "ptp_ref", "eth-ck"; clocks = <&rcc ETH1MAC>, <&rcc ETH1TX>, <&rcc ETH1RX>, <&rcc ETH1STP>, + <&rcc ETH1PTP_K>, <&rcc ETH1CK_K>; st,syscon = <&syscfg 0x4 0xff0000>; snps,mixed-burst; diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi index 49583137b597..053fc6691205 100644 --- a/arch/arm/boot/dts/st/stm32mp133.dtsi +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi @@ -81,11 +81,13 @@ "mac-clk-tx", "mac-clk-rx", "ethstp", + "ptp_ref", "eth-ck"; clocks = <&rcc ETH2MAC>, <&rcc ETH2TX>, <&rcc ETH2RX>, <&rcc ETH2STP>, + <&rcc ETH2PTP_K>, <&rcc ETH2CK_K>; st,syscon = <&syscfg 0x4 0xff000000>; snps,mixed-burst; diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi index 40605ea85ee1..8613a6a17ee9 100644 --- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi @@ -5,6 +5,14 @@ */ #include <dt-bindings/pinctrl/stm32-pinfunc.h> +&hdp { + /omit-if-no-ref/ + hdp2_gpo: hdp2-pins { + function = "gpoval2"; + pins = "HDP2"; + }; +}; + &pinctrl { /omit-if-no-ref/ adc1_ain_pins_a: adc1-ain-0 { @@ -732,6 +740,23 @@ }; /omit-if-no-ref/ + hdp2_pins_a: hdp2-0 { + pins { + pinmux = <STM32_PINMUX('E', 13, AF0)>; /* HDP2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + /omit-if-no-ref/ + hdp2_sleep_pins_a: hdp2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 13, ANALOG)>; /* HDP2 */ + }; + }; + + /omit-if-no-ref/ i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -1305,6 +1330,20 @@ }; /omit-if-no-ref/ + m4_leds_orange_pins_a: m4-leds-orange-0 { + pins { + pinmux = <STM32_PINMUX('H', 7, RSVD)>; + }; + }; + + /omit-if-no-ref/ + m4_leds_orange_pins_b: m4-leds-orange-1 { + pins { + pinmux = <STM32_PINMUX('D', 8, RSVD)>; + }; + }; + + /omit-if-no-ref/ mco1_pins_a: mco1-0 { pins { pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */ diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index 0daa8ffe2ff5..b1b568dfd126 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -270,6 +270,13 @@ status = "disabled"; }; + hdp: pinctrl@5002a000 { + compatible = "st,stm32mp151-hdp"; + reg = <0x5002a000 0x400>; + clocks = <&rcc HDP>; + status = "disabled"; + }; + mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts index 39a3211c6133..5d219a448763 100644 --- a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts +++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts @@ -239,7 +239,7 @@ i2s1_port: port { i2s1_endpoint: endpoint { - format = "i2s"; + dai-format = "i2s"; mclk-fs = <256>; remote-endpoint = <&codec_endpoint>; }; @@ -255,7 +255,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &mdma1 { diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi index 4640dafb1598..92794b942ab2 100644 --- a/arch/arm/boot/dts/st/stm32mp153.dtsi +++ b/arch/arm/boot/dts/st/stm32mp153.dtsi @@ -40,6 +40,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; + resets = <&rcc FDCAN_R>; bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; access-controllers = <&etzpc 62>; status = "disabled"; @@ -54,6 +55,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; + resets = <&rcc FDCAN_R>; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; access-controllers = <&etzpc 62>; status = "disabled"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts index 1b34fbe10b4f..1ec3b8f2faa9 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts @@ -45,7 +45,6 @@ reg = <0>; reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; power-supply = <&v3v3>; - status = "okay"; port { panel_in: endpoint { @@ -63,6 +62,12 @@ remote-endpoint = <&panel_in>; }; +&hdp { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdp2_gpo &hdp2_pins_a>; + pinctrl-1 = <&hdp2_sleep_pins_a>; +}; + &i2c1 { touchscreen@38 { compatible = "focaltech,ft6236"; @@ -71,7 +76,6 @@ interrupt-parent = <&gpiof>; touchscreen-size-x = <480>; touchscreen-size-y = <800>; - status = "okay"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts index 9cf5ed111b52..f6c478dbd041 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts @@ -328,6 +328,8 @@ <&vdev0vring1>, <&vdev0buffer>; mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; mbox-names = "vq0", "vq1", "shutdown", "detach"; + pinctrl-names = "default"; + pinctrl-0 = <&m4_leds_orange_pins_b>; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts index ac42d462d449..2531f4bc8ca4 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts @@ -92,7 +92,7 @@ leds: leds { compatible = "gpio-leds"; - led0{ + led0 { label = "buzzer"; gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts index 43375c4d62a3..8fa61e54d026 100644 --- a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts @@ -51,7 +51,6 @@ reg = <0>; reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; power-supply = <&scmi_v3v3>; - status = "okay"; port { panel_in: endpoint { @@ -77,7 +76,6 @@ interrupt-parent = <&gpiof>; touchscreen-size-x = <480>; touchscreen-size-y = <800>; - status = "okay"; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index be0c355d3105..154698f87b0e 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -262,7 +262,7 @@ baseboard_eeprom: &sip_eeprom { status = "okay"; usbhub: usbhub@2c { - compatible ="microchip,usb2514b"; + compatible = "microchip,usb2514b"; reg = <0x2c>; vdd-supply = <&v3v3>; reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi index abe2dfe70636..52c4e69597a4 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi @@ -62,7 +62,6 @@ pinctrl-0 = <&i2c2_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; - status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 0fb4e55843b9..5c77202ee196 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -20,7 +20,6 @@ default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; power-supply = <®_panel_bl>; - status = "okay"; }; gpio-keys-polled { @@ -135,7 +134,6 @@ "MIC_IN", "Microphone Jack", "Microphone Jack", "Mic Bias"; dais = <&sai2a_port &sai2b_port>; - status = "okay"; }; }; @@ -150,7 +148,6 @@ pinctrl-0 = <&i2c2_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; - status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi index 142d4a8731f8..4cc633683c6b 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi @@ -269,7 +269,6 @@ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; - status = "okay"; regulators { compatible = "st,stpmic1-regulators"; @@ -388,7 +387,6 @@ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; interrupt-names = "onkey-falling", "onkey-rising"; power-off-time-sec = <10>; - status = "okay"; }; watchdog { diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi index 46692d8f566a..8cea6facd27b 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi @@ -479,6 +479,8 @@ <&vdev0vring1>, <&vdev0buffer>; mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; mbox-names = "vq0", "vq1", "shutdown", "detach"; + pinctrl-names = "default"; + pinctrl-0 = <&m4_leds_orange_pins_a>; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi index ae2e8dffbe04..ea47f9960c35 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -269,7 +269,7 @@ vcc7-supply = <&vbat>; vccio-supply = <&vbat>; - ti,en-ck32k-xtal = <1>; + ti,en-ck32k-xtal; regulators { vrtc_reg: regulator@0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts index 06767ea164b5..ece7f7854f6a 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts @@ -483,8 +483,6 @@ status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; - /* 16 serializers */ - num-serializer = <16>; serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0 >; diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts index fd91a3c01a63..06a352f98b22 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts @@ -143,7 +143,7 @@ sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg =<0xa>; + reg = <0xa>; clocks = <&clk12m>; micbias-resistor-k-ohms = <4>; micbias-voltage-m-volts = <2250>; @@ -155,7 +155,7 @@ tda9988: tda9988@70 { compatible = "nxp,tda998x"; - reg =<0x70>; + reg = <0x70>; audio-ports = <TDA998x_I2S 1>; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts index 757ebd96b3f0..f3524e5ee43e 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts @@ -109,7 +109,7 @@ audio_mclk_fixed: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <24576000>; /* 24.576MHz */ + clock-frequency = <24576000>; /* 24.576MHz */ }; audio_mclk: audio_mclk_gate@0 { diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi index d6a143abae5f..18ad52e93955 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi @@ -200,7 +200,7 @@ ranges = <0x0 0x9000 0x1000>; uart0: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <72>; @@ -1108,7 +1108,7 @@ ranges = <0x0 0x22000 0x1000>; uart1: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <73>; @@ -1139,7 +1139,7 @@ ranges = <0x0 0x24000 0x1000>; uart2: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <74>; @@ -1457,10 +1457,10 @@ gpio1: gpio@0 { compatible = "ti,omap4-gpio"; - gpio-ranges = <&am33xx_pinmux 0 0 8>, - <&am33xx_pinmux 8 90 4>, - <&am33xx_pinmux 12 12 16>, - <&am33xx_pinmux 28 30 4>; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1770,7 +1770,7 @@ ranges = <0x0 0xa6000 0x1000>; uart3: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <44>; @@ -1799,7 +1799,7 @@ ranges = <0x0 0xa8000 0x1000>; uart4: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <45>; @@ -1828,7 +1828,7 @@ ranges = <0x0 0xaa000 0x1000>; uart5: serial@0 { - compatible = "ti,am3352-uart", "ti,omap3-uart"; + compatible = "ti,am3352-uart"; clock-frequency = <48000000>; reg = <0x0 0x1000>; interrupts = <46>; diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi index 0614ffdc1578..43ec2a95f4bb 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi @@ -461,10 +461,10 @@ cppi41dma: dma-controller@2000 { compatible = "ti,am3359-cppi41"; - reg = <0x0000 0x1000>, - <0x2000 0x1000>, - <0x3000 0x1000>, - <0x4000 0x4000>; + reg = <0x0000 0x1000>, + <0x2000 0x1000>, + <0x3000 0x1000>, + <0x4000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi index 994e69ab38d7..87b61a98d5e9 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi @@ -149,7 +149,7 @@ gpio_fan: gpio_fan { /* Based on 5v 500mA AFB02505HHB */ compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; + gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0>, <13000 1>; #cooling-cells = <2>; diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi index a8cd724ce4bc..27d1f35a31fd 100644 --- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi @@ -155,10 +155,10 @@ cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi index b68686f0643b..407d7bc5b13a 100644 --- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi +++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi @@ -643,10 +643,10 @@ cppi41dma: dma-controller@47402000 { compatible = "ti,am3359-cppi41"; - reg = <0x47400000 0x1000 - 0x47402000 0x1000 - 0x47403000 0x1000 - 0x47404000 0x4000>; + reg = <0x47400000 0x1000>, + <0x47402000 0x1000>, + <0x47403000 0x1000>, + <0x47404000 0x4000>; reg-names = "glue", "controller", "scheduler", "queuemgr"; interrupts = <17>; interrupt-names = "glue"; diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi index ba7fdaae9c6e..c9282f57ffa5 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi @@ -267,8 +267,8 @@ syscon-phy-power = <&scm_conf 0x300>; clocks = <&usb_phy1_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -279,8 +279,8 @@ syscon-phy-power = <&scm_conf 0xe74>; clocks = <&usb_phy2_always_on_clk32k>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>; - clock-names = "wkupclk", - "refclk"; + clock-names = "wkupclk", + "refclk"; #phy-cells = <0>; }; @@ -294,9 +294,9 @@ clocks = <&usb_phy3_always_on_clk32k>, <&sys_clkin1>, <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>; - clock-names = "wkupclk", - "sysclk", - "refclk"; + clock-names = "wkupclk", + "sysclk", + "refclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts index f747ac56eb92..1d2df8128cfe 100644 --- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts @@ -83,10 +83,10 @@ compatible = "ti,lp8733"; reg = <0x60>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&evm_5v0>; - ldo1-in-supply =<&evm_5v0>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&evm_5v0>; + ldo1-in-supply = <&evm_5v0>; lp8733_regulators: regulators { lp8733_buck0_reg: buck0 { @@ -131,10 +131,10 @@ compatible = "ti,lp8732"; reg = <0x61>; - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&vsys_3v3>; - ldo1-in-supply =<&vsys_3v3>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; lp8732_regulators: regulators { lp8732_buck0_reg: buck0 { diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi index 07d5894ebb74..910e3b54f530 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi @@ -275,8 +275,8 @@ ethernet@6,0 { compatible = "davicom,dm9000"; - reg = <6 0x000 2>, - <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + reg = <6 0x000 2>, + <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ bank-width = <2>; interrupt-parent = <&gpio1>; interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi index a7f99ae0c1fe..78c657429f64 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi @@ -65,7 +65,7 @@ ti,debounce-max = /bits/ 16 <10>; ti,debounce-tol = /bits/ 16 <5>; ti,debounce-rep = /bits/ 16 <1>; - ti,keep-vref-on = <1>; + ti,keep-vref-on; ti,settle-delay-usec = /bits/ 16 <150>; wakeup-source; diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts index 07bec48dc441..959fdeeb769e 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts @@ -57,8 +57,8 @@ &mmc1_aux_pins >; - wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ - cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ + wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ + cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ }; &dss { diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts index b535d24c6140..b550105585a1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts @@ -467,7 +467,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - eth@0 { + ethernet@0 { pinctrl-names = "default"; pinctrl-0 = <&ks8851_pins>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi index cadc7e02592b..80e89a2f8be1 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi @@ -194,7 +194,7 @@ pinctrl-0 = <&mcspi1_pins>; status = "okay"; - eth@0 { + ethernet@0 { compatible = "ks8851"; pinctrl-names = "default"; pinctrl-0 = <&ks8851_irq_pins>; |