diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
129 files changed, 8217 insertions, 931 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb26..6f34d5ed331c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -33,8 +33,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo +lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb +dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb @@ -72,6 +74,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb @@ -126,6 +130,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-radxa-dragon-q6a.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo @@ -258,6 +263,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb @@ -298,6 +304,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-samsung-r0q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb + +sm8550-hdk-rear-camera-card-dtbs := sm8550-hdk.dtb sm8550-hdk-rear-camera-card.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb @@ -344,6 +354,8 @@ x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb +x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14-lcd.dtb x1p42100-asus-zenbook-a14-lcd-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 08141b41de24..8bf5c5583fc2 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -17,6 +17,9 @@ #include <dt-bindings/interconnect/qcom,qcm2290.h> #include <dt-bindings/interconnect/qcom,rpm-icc.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> / { interrupt-parent = <&intc>; @@ -552,6 +555,13 @@ bias-disable; }; + qup_uart1_default: qup-uart1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-disable; + }; + qup_uart3_default: qup-uart3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; @@ -566,6 +576,13 @@ bias-disable; }; + qup_uart5_default: qup-uart5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio22", "gpio23"; function = "cci_i2c"; @@ -671,6 +688,43 @@ }; }; + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,qcm2290-lpass-lpi-pinctrl", + "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0 0x0a7c0000 0x0 0x20000>, + <0x0 0x0a950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + lpi_i2s2_active: lpi-i2s2-active-state { + sck-pins { + pins = "gpio10"; + function = "i2s2_clk"; + bias-disable; + drive-strength = <8>; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + bias-disable; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + bias-disable; + drive-strength = <8>; + }; + }; + }; + gcc: clock-controller@1400000 { compatible = "qcom,gcc-qcm2290"; reg = <0x0 0x01400000 0x0 0x1f0000>; @@ -1197,6 +1251,23 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1302,7 +1373,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1418,6 +1489,23 @@ #size-cells = <0>; status = "disabled"; }; + + uart5: serial@4a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart5_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; }; usb: usb@4ef8800 { @@ -1537,7 +1625,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; @@ -1685,25 +1773,25 @@ }; }; - camss: camss@5c6e000 { + camss: camss@5c11000 { compatible = "qcom,qcm2290-camss"; - reg = <0x0 0x5c6e000 0x0 0x1000>, + reg = <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6e000 0x0 0x1000>, <0x0 0x5c75000 0x0 0x1000>, <0x0 0x5c52000 0x0 0x1000>, <0x0 0x5c53000 0x0 0x1000>, <0x0 0x5c66000 0x0 0x400>, <0x0 0x5c68000 0x0 0x400>, - <0x0 0x5c11000 0x0 0x1000>, <0x0 0x5c6f000 0x0 0x4000>, <0x0 0x5c76000 0x0 0x4000>; - reg-names = "csid0", + reg-names = "top", + "csid0", "csid1", "csiphy0", "csiphy1", "csitpg0", "csitpg1", - "top", "vfe0", "vfe1"; @@ -2077,6 +2165,76 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 5b2e88915c2f..9fa70ff6887b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -203,6 +203,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/apq8096/a530_zap.mbn"; +}; + &hsusb_phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index df8d6e5c1f45..36dd6599402b 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -743,20 +743,32 @@ }; &lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { pins = "gpio12"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; }; - spkr_23_sd_n_active: spkr-23-sd-n-active-state { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio13"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_3_sd_n_active: spkr-3-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; }; @@ -908,12 +920,14 @@ &swr0 { status = "okay"; - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-0 = <&wsa_swr_active>; pinctrl-names = "default"; /* WSA8845, Left Woofer */ left_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; @@ -926,8 +940,10 @@ /* WSA8845, Left Tweeter */ left_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -961,14 +977,16 @@ &swr3 { status = "okay"; - pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-0 = <&wsa2_swr_active>; pinctrl-names = "default"; /* WSA8845, Right Woofer */ right_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -979,8 +997,10 @@ /* WSA8845, Right Tweeter */ right_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_3_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi index 1aead50b8920..4a69852e9176 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi @@ -3,8 +3,8 @@ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -451,8 +451,7 @@ }; &tlmm { - gpio-reserved-ranges = <34 2>, /* TPM LP & INT */ - <44 4>; /* SPI (TPM) */ + gpio-reserved-ranges = <34 2>; /* TPM LP & INT */ pcie4_default: pcie4-default-state { clkreq-n-pins { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi index 621890ada153..6a31a0adf8be 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi @@ -240,6 +240,26 @@ }; }; + pmk8550_sdam_15: nvram@7e00 { + compatible = "qcom,spmi-sdam"; + reg = <0x7e00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7e00 0x100>; + + charge_limit_en: charge-limit-en@73 { + reg = <0x73 0x1>; + }; + + charge_limit_end: charge-limit-end@75 { + reg = <0x75 0x1>; + }; + + charge_limit_delta: charge-limit-delta@76 { + reg = <0x76 0x1>; + }; + }; + pmk8550_gpios: gpio@8800 { compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; reg = <0xb800>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi index 51576d9c935d..a17900eacb20 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -75,7 +75,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_0: l2-cache { compatible = "cache"; @@ -92,7 +91,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu2: cpu@200 { @@ -103,7 +101,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu3: cpu@300 { @@ -114,7 +111,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu4: cpu@10000 { @@ -125,7 +121,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_1: l2-cache { compatible = "cache"; @@ -142,7 +137,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu6: cpu@10200 { @@ -153,7 +147,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu7: cpu@10300 { @@ -164,7 +157,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu8: cpu@20000 { @@ -175,7 +167,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_2: l2-cache { compatible = "cache"; @@ -192,7 +183,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu10: cpu@20200 { @@ -203,7 +193,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu11: cpu@20300 { @@ -214,7 +203,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu-map { @@ -371,61 +359,73 @@ cpu_pd0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd8: power-domain-cpu8 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd9: power-domain-cpu9 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd10: power-domain-cpu10 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd11: power-domain-cpu11 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cluster_pd0: power-domain-cpu-cluster0 { @@ -807,7 +807,34 @@ <0>, <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, - <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -3240,74 +3267,132 @@ pcie3_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 1 x4 and GEN 2 x2 */ - opp-10000000 { + /* 2.5 GT/s x4 */ + opp-10000000-1 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <1>; }; - /* GEN 1 x8 and GEN 2 x4 */ - opp-20000000 { + /* 2.5 GT/s x8 */ + opp-20000000-1 { opp-hz = /bits/ 64 <20000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <2000000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x8 */ - opp-40000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x4 */ + opp-20000000-2 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x8 */ + opp-40000000-2 { opp-hz = /bits/ 64 <40000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <4000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x4 */ + opp-32000000-3 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x8 */ + opp-64000000-3 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 3 x4 and GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; - /* GEN 3 x8 and GEN 4 x4 */ - opp-64000000 { + /* 16 GT/s x4 */ + opp-64000000-4 { opp-hz = /bits/ 64 <64000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <7876000 1>; + opp-level = <4>; }; - /* GEN 4 x8 */ - opp-128000000 { + /* 16 GT/s x8 */ + opp-128000000-4 { opp-hz = /bits/ 64 <128000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <15753000 1>; + opp-level = <4>; }; }; @@ -4922,6 +5007,7 @@ interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; status = "disabled"; @@ -4939,15 +5025,8 @@ dma-coherent; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_2_dwc3_hs: endpoint { - }; + port { + usb_2_dwc3_hs: endpoint { }; }; }; @@ -5466,7 +5545,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae90000 0 0x200>, <0 0x0ae90200 0 0x200>, - <0 0x0ae90400 0 0x600>, + <0 0x0ae90400 0 0xc00>, <0 0x0ae91000 0 0x400>, <0 0x0ae91400 0 0x400>; @@ -5554,7 +5633,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae98000 0 0x200>, <0 0x0ae98200 0 0x200>, - <0 0x0ae98400 0 0x600>, + <0 0x0ae98400 0 0xc00>, <0 0x0ae99000 0 0x400>, <0 0x0ae99400 0 0x400>; @@ -5642,7 +5721,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae9a000 0 0x200>, <0 0x0ae9a200 0 0x200>, - <0 0x0ae9a400 0 0x600>, + <0 0x0ae9a400 0 0xc00>, <0 0x0ae9b000 0 0x400>, <0 0x0ae9b400 0 0x400>; @@ -5729,7 +5808,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0aea0000 0 0x200>, <0 0x0aea0200 0 0x200>, - <0 0x0aea0400 0 0x600>, + <0 0x0aea0400 0 0xc00>, <0 0x0aea1000 0 0x400>, <0 0x0aea1400 0 0x400>; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index ef2b52f3597d..eb393f3fd728 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -3,7 +3,7 @@ * IPQ5424 device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -13,6 +13,7 @@ #include <dt-bindings/reset/qcom,ipq5424-gcc.h> #include <dt-bindings/interconnect/qcom,ipq5424.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <2>; @@ -57,6 +58,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -82,6 +84,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_100: l2-cache { compatible = "cache"; @@ -101,6 +104,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_200: l2-cache { compatible = "cache"; @@ -120,6 +124,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_300: l2-cache { compatible = "cache"; @@ -213,7 +218,7 @@ }; tfa@8a832000 { - reg = <0x0 0x8a832000 0x0 0x7d000>; + reg = <0x0 0x8a832000 0x0 0x80000>; no-map; status = "disabled"; }; @@ -815,6 +820,36 @@ #interconnect-cells = <1>; }; + clock-controller@39b00000 { + compatible = "qcom,ipq5424-nsscc"; + reg = <0 0x39b00000 0 0x100000>; + clocks = <&cmn_pll IPQ5424_XO_24MHZ_CLK>, + <&cmn_pll IPQ5424_NSS_300MHZ_CLK>, + <&cmn_pll IPQ5424_PPE_375MHZ_CLK>, + <&gcc GPLL0_OUT_AUX>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&gcc GCC_NSSCC_CLK>; + clock-names = "xo", + "nss", + "ppe", + "gpll0_out", + "uniphy0_rx", + "uniphy0_tx", + "uniphy1_rx", + "uniphy1_tx", + "uniphy2_rx", + "uniphy2_tx", + "bus"; + #clock-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + pcie3: pcie@40000000 { compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; reg = <0x0 0x40000000 0x0 0xf1c>, @@ -1235,18 +1270,28 @@ thermal-sensors = <&tsens 14>; trips { - cpu-critical { + cpu0_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu0_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal { @@ -1254,18 +1299,28 @@ thermal-sensors = <&tsens 12>; trips { - cpu-critical { + cpu1_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu1_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal { @@ -1273,18 +1328,28 @@ thermal-sensors = <&tsens 11>; trips { - cpu-critical { + cpu2_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu2_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal { @@ -1292,18 +1357,28 @@ thermal-sensors = <&tsens 13>; trips { - cpu-critical { + cpu3_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu3_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; wcss-tile2-thermal { diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index 4b04dea57ec8..c2ccbb67f800 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -3338,6 +3338,86 @@ }; }; + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1c { + reg = <0x1c>; + + qdss_tpda_in28: endpoint { + remote-endpoint = <&spdm_tpdm_out>; + }; + }; + }; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&qdss_dl_funnel_in0>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06005000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + qdss_dl_funnel_in0: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + }; + + out-ports { + port { + qdss_dl_funnel_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; + }; + }; + + tpdm@600f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0600f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + spdm_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in28>; + }; + }; + }; + }; + + cti@6010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06010000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; @@ -3357,6 +3437,14 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_dl_funnel_out>; + }; + }; + port@7 { reg = <7>; funnel0_in7: endpoint { @@ -3471,6 +3559,38 @@ }; }; + cti@6b00000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b00000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b01000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b01000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b02000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b02000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b03000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06b04000 0 0x1000>; @@ -3490,6 +3610,14 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + + swao_funnel_in6: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + port@7 { reg = <7>; swao_funnel_in: endpoint { @@ -3548,6 +3676,170 @@ }; }; + tpda@6b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&swao_prio0_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&swao_prio1_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&swao_prio2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&swao_prio3_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&swao_tpdm_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&swao_funnel_in6>; + }; + }; + }; + }; + + tpdm@6b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio0_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@6b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio1_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@6b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio2_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@6b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio3_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + swao_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + cti@6b11000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b11000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; @@ -3885,6 +4177,12 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sc7280-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sc7280-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -5074,6 +5372,8 @@ phys = <&mdss_dsi_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso new file mode 100644 index 000000000000..4600d5441cce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* + * Camera Sensor overlay on top of leman evk core kit. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,sa8775p-camcc.h> +#include <dt-bindings/gpio/gpio.h> + +&{/} { + vreg_cam1_1p8: vreg_cam1_1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_1p8"; + startup-delay-us = <10000>; + enable-active-high; + gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&camcc { + status = "okay"; +}; + +&camss { + vdda-pll-supply = <&vreg_l1c>; + vdda-phy-supply = <&vreg_l4a>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep1>; + }; + }; + }; +}; + +&cci1 { + pinctrl-0 = <&cci1_0_default>; + pinctrl-1 = <&cci1_0_sleep>; + + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam1_default>; + pinctrl-names = "default"; + + clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_s4a>; + avdd-supply = <&vreg_cam1_1p8>; + + port { + imx577_ep1: endpoint { + clock-lanes = <7>; + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy1_ep>; + }; + }; + }; +}; + +&tlmm { + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio73"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + rst-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c7dc9b8f4457..b40fa203e4a2 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -501,6 +502,20 @@ }; }; +&i2c19 { + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; +}; + &iris { firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn"; @@ -587,15 +602,28 @@ status = "okay"; }; +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qup_i2c19_default { + drive-strength = <2>; + bias-pull-up; +}; + &qupv3_id_0 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_2 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi index 1369c3d43f86..341119fc8244 100644 --- a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi @@ -132,6 +132,15 @@ }; }; + pmm8654au_0_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, + <0x6200>; + reg-names = "rtc", + "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pmm8654au_0_gpios: gpio@8800 { compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index cf685cb186ed..0b154d57ba24 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -3901,6 +3901,32 @@ status = "disabled"; }; + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_0_qmpphy: phy@88e8000 { compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; reg = <0 0x088e8000 0 0x2000>; @@ -3925,6 +3951,36 @@ status = "disabled"; }; + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + refgen: regulator@891c000 { + compatible = "qcom,sa8775p-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + usb_0: usb@a600000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a600000 0 0xfc100>; @@ -3973,43 +4029,6 @@ status = "disabled"; }; - usb_1_hsphy: phy@88e6000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e6000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB2_PHY_SEC_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_1_qmpphy: phy@88ea000 { - compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; - reg = <0 0x088ea000 0 0x2000>; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "aux", "ref", "com_aux", "pipe"; - - resets = <&gcc GCC_USB3_PHY_SEC_BCR>, - <&gcc GCC_USB3PHY_PHY_SEC_BCR>; - reset-names = "phy", "phy_phy"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - #clock-cells = <0>; - clock-output-names = "usb3_sec_phy_pipe_clk_src"; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_1: usb@a800000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a800000 0 0xfc100>; @@ -4058,19 +4077,6 @@ status = "disabled"; }; - usb_2_hsphy: phy@88e7000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e7000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB3_PHY_TERT_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_2: usb@a400000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a400000 0 0xfc100>; @@ -4106,6 +4112,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; iommus = <&apps_smmu 0x020 0x0>; @@ -4899,6 +4906,8 @@ operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -4981,6 +4990,8 @@ operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -6812,11 +6823,12 @@ "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC1_GDSC>; @@ -6853,11 +6865,12 @@ "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC0_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index e72cf6725a52..bb35893da73d 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -9,8 +9,8 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. Monaco EVK"; @@ -401,10 +401,12 @@ }; &qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi index a94b0bfa98dc..e990d7367719 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi @@ -18,7 +18,6 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - allow-set-time; }; pmm8620au_0_gpios: gpio@8800 { diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 8d78ccac411e..816fa2af8a9a 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -20,6 +20,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -4294,6 +4295,12 @@ status = "disabled"; }; + refgen: regulator@891c000 { + compatible = "qcom,qcs8300-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + gpu: gpu@3d00000 { compatible = "qcom,adreno-623.0", "qcom,adreno"; reg = <0x0 0x03d00000 0x0 0x40000>, diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 887764dc55b2..93d5ea279cff 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -79,6 +79,19 @@ }; }; + reg_ts_vcca: regulator-vcca-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vcca-ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&ts_vcca_default>; + pinctrl-names = "default"; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; @@ -176,6 +189,25 @@ }; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,hx8527e", "himax,hx852es"; + reg = <0x48>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + + pinctrl-0 = <&ts_int_reset_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>; + }; +}; + &blsp_uart2 { status = "okay"; pinctrl-0 = <&blsp_uart2_console_default>; @@ -338,6 +370,20 @@ bias-disable; }; + ts_int_reset_default: ts-int-reset-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_vcca_default: ts-vcca-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index e7f265e3c2ab..e33453c3e51e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -5,7 +5,7 @@ /* SM5504 MUIC instead of SM5502 */ /delete-node/ &muic; -/* Touchscreen varies depending on model variant */ +/* IST3038 instead of Zinitix BT541 */ /delete-node/ &touchscreen; &blsp_i2c1 { @@ -24,6 +24,26 @@ }; }; +&blsp_i2c5 { + touchscreen: touchscreen@50 { + compatible = "imagis,ist3038"; + reg = <0x50>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + + vdd-supply = <®_vdd_tsp_a>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; +}; + /* On rossa backlight is controlled with MIPI DCS commands */ &clk_pwm { status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index 3413b0970c4a..1981bb71f6a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -16,26 +16,6 @@ constant-charge-voltage-max-microvolt = <4400000>; }; -&blsp_i2c5 { - touchscreen@50 { - compatible = "imagis,ist3038"; - reg = <0x50>; - - interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; - - touchscreen-size-x = <480>; - touchscreen-size-y = <800>; - - vdd-supply = <®_vdd_tsp_a>; - vddio-supply = <&pm8916_l6>; - - pinctrl-0 = <&tsp_int_default>; - pinctrl-names = "default"; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; -}; - &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts new file mode 100644 index 000000000000..91837ff940f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Barnabas Czeman + */ +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "msm8937.dtsi" +#include "pm8937.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi 3S (land)"; + compatible = "xiaomi,land", "qcom,msm8937"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_MSM8937 0x0>; + qcom,board-id = <0x1000b 1>, <0x2000b 1>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4100000>; + constant-charge-current-max-microamp = <1000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@8dd01000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + irled { + compatible = "gpio-ir-tx"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + reserved-memory { + reserved@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer: memory@8dd01000 { + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8937_l10>; + vio-supply = <&pm8937_l5>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen@3e { + compatible = "edt,edt-ft5306"; + reg = <0x3e>; + + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; +}; + +&pm8937_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8937_spmi_regulators { + /* APC */ + pm8937_s5: s5 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&pmi8950_wled { + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdc2_cmd_default { + drive-strength = <12>; +}; + +&sdc2_data_default { + drive-strength = <12>; +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <20 4>; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi new file mode 100644 index 000000000000..b93621080989 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi @@ -0,0 +1,2133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> +#include <dt-bindings/clock/qcom,gcc-msm8917.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; + }; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-unified; + }; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu-map { + /* Little Cores */ + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + /* Big Cores */ + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8937", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", + "bus", + "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + device_type = "memory"; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + qseecom_mem: reserved@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + rmtfs@92100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x92100000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + adsp_mem: adsp { + size = <0x0 0x1100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + wcnss_mem: wcnss { + size = <0x0 0x700000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + venus_mem: venus { + size = <0x0 0x400000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + }; + + cpu_opp_table_c0: opp-table-c0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + }; + + cpu_opp_table_c1: opp-table-c1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs1 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8937", "qcom,smd-rpm"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + + qfprom: qfprom@a4000 { + compatible = "qcom,msm8937-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@1d8 { + reg = <0x1d8 0x1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@1d9 { + reg = <0x1d9 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@1d9 { + reg = <0x1d9 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@1da { + reg = <0x1da 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@1db { + reg = <0x1db 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@1dc { + reg = <0x1dc 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@1dc { + reg = <0x1dc 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@1dd { + reg = <0x1dd 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@1de { + reg = <0x1de 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@1df { + reg = <0x1df 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@210 { + reg = <0x210 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@210 { + reg = <0x210 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p2@211 { + reg = <0x211 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@211 { + reg = <0x211 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@212 { + reg = <0x212 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@213 { + reg = <0x213 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@214 { + reg = <0x214 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@214 { + reg = <0x214 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@215 { + reg = <0x215 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@216 { + reg = <0x216 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@217 { + reg = <0x217 0x1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@230 { + reg = <0x230 0x1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@230 { + reg = <0x230 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1: s10-p1@231 { + reg = <0x231 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10-p2@232 { + reg = <0x232 0x1>; + bits = <2 6>; + }; + + gpu_speed_bin: gpu-speed-bin@201b { + reg = <0x201b 0x1>; + bits = <7 1>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0006c000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", + "ahb", + "sleep"; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", + "por"; + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8937-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_default: blsp1-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_default: blsp2-i2c1-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + cs-pins { + pins = "gpio10"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + }; + + blsp1_spi3_sleep: blsp1-spi3-sleep-state { + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + cs0-pins { + pins = "gpio47"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp2_spi2_sleep: blsp2-spi2-sleep-state { + cs0-pins { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_cmd_default: cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + sdc2_data_default: data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-active-state { + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8937"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8937", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x3000>; + reg-names = "mdss_phys", + "vbif_phys"; + ranges; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8937-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi0_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a94a00 0xd4>, + <0x01a94400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>, + <&gcc MSM8937_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc MSM8937_GCC_MDSS_BYTE1_CLK>, + <&gcc MSM8937_GCC_MDSS_PCLK1_CLK>, + <&gcc MSM8937_GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi1_phy>; + + operating-points-v2 = <&mdss_dsi1_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + + mdss_dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi1_phy: phy@1a96a00 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a96a00 0xd4>, + <0x01a96400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + + gpu: gpu@1c00000 { + compatible = "qcom,adreno-505.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + #cooling-cells = <2>; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc MSM8937_GCC_OXILI_TIMER_CLK>, + <&gcc MSM8937_GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + adreno_smmu: iommu@1c40000 { + compatible = "qcom,msm8996-smmu-v2", + "qcom,adreno-smmu", + "qcom,smmu-v2"; + reg = <0x01c40000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + + clocks = <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_OXILI_AHB_CLK>; + clock-names = "bus", + "iface"; + + power-domains = <&gcc MSM8937_OXILI_CX_GDSC>; + }; + + apps_iommu: iommu@1e20000 { + compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", + "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x500>, + <0x07824000 0x800>; + reg-names = "hc", + "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x500>, + <0x07864000 0x800>; + reg-names = "hc", + "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <12>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 2>, + <&blsp1_dma 3>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, + <&blsp1_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_spi3_default>; + pinctrl-1 = <&blsp1_spi3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 10>, + <&blsp1_dma 11>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1d000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <10>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp2_i2c1: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 4>, + <&blsp2_dma 5>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi2: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 6>, + <&blsp2_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_spi2_default>; + pinctrl-1 = <&blsp2_spi2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78db000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078db000 0x200>, + <0x078db200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", + "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", + "dxe", + "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + power-domains = <&rpmpd MSM8937_VDDCX>, + <&rpmpd MSM8937_VDDMX>; + power-domain-names = "cx", + "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", + "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + apcs1: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + thermal_zones: thermal-zones { + aoss-thermal { + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdm-core-thermal { + thermal-sensors = <&tsens 1>; + + trips { + mdm_core_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-thermal { + thermal-sensors = <&tsens 2>; + + trips { + q6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + thermal-sensors = <&tsens 3>; + + trips { + camera_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens 4>; + + cooling-maps { + map0 { + trip = <&cpuss1_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + thermal-sensors = <&tsens 5>; + + cooling-maps { + map0 { + trip = <&cpu4_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu4_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu4_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + thermal-sensors = <&tsens 6>; + + cooling-maps { + map0 { + trip = <&cpu5_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu5_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu5_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + thermal-sensors = <&tsens 7>; + + cooling-maps { + map0 { + trip = <&cpu6_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu6_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu6_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + thermal-sensors = <&tsens 8>; + + cooling-maps { + map0 { + trip = <&cpu7_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu7_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu7_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens 9>; + + cooling-maps { + map0 { + trip = <&cpuss0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens 10>; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts new file mode 100644 index 000000000000..ebb548e62e02 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Asus ZenFone 2 Laser/Selfie (1080p)"; + compatible = "asus,z00t", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l8>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&imu_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l8>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + pinctrl-0 = <&blsp_uart2_console_default>; + pinctrl-1 = <&blsp_uart2_console_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; + + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + imu_default: imu-default-state { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio112"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 220eeb31fdc7..0bb9e3d8f714 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -27,10 +27,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index f772618e80c7..1d7b27c5aff6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -28,10 +28,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index bd3f39e1b98f..3c6a40212a8d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -91,10 +91,8 @@ }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c75b522f6eba..9d4ce47578fb 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1333,7 +1333,7 @@ }; }; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; }; @@ -3496,6 +3496,9 @@ <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; + interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>; + interconnect-names = "usb-ddr", "apps-usb"; power-domains = <&gcc USB30_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index 443599a5a5dd..f8ab03f106a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,10 +39,8 @@ }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts index 33d84ac541e1..1cc33c3123a4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts @@ -91,10 +91,8 @@ }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; }; &mdp_smmu { diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 3d3b1cd97cc3..5bd91a5cd124 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -22,19 +22,19 @@ channel@0 { reg = <VADC_USBIN>; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "usbin"; }; channel@1 { reg = <VADC_DCIN>; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "dcin"; }; channel@2 { reg = <VADC_VCHG_SNS>; - qcom,pre-scaling = <1 1>; + qcom,pre-scaling = <1 3>; label = "vchg_sns"; }; @@ -55,6 +55,14 @@ qcom,pre-scaling = <1 1>; label = "chg_temp"; }; + + channel@e { + reg = <VADC_GND_REF>; + }; + + channel@f { + reg = <VADC_VDD_VADC>; + }; }; pmi8950_mpps: mpps@a000 { diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi index 10d26958d3c6..2cecd2dd0de8 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi +++ b/arch/arm64/boot/dts/qcom/purwa.dtsi @@ -3,8 +3,8 @@ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. */ -/* X1P42100 is heavily based on X1E80100, with some meaningful differences */ -#include "x1e80100.dtsi" +/* X1P42100 is heavily based on hamoa, with some meaningful differences */ +#include "hamoa.dtsi" /delete-node/ &bwmon_cluster0; /delete-node/ &cluster_pd2; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 519e458e1a89..455e5c9bb072 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -16,7 +16,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -47,6 +47,8 @@ stride = <(1224 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + vci-supply = <&vreg_oled_vci>; + dvdd-supply = <&vreg_oled_dvdd>; }; }; @@ -193,6 +195,19 @@ pinctrl-names = "default"; }; + vreg_vtof_ldo_2p8: regulator-vtof-ldo-2p8 { + compatible = "regulator-fixed"; + regulator-name = "VTOF_LDO_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <233>; + + gpio = <&tlmm 141 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + reserved-memory { cont_splash_mem: cont-splash@e1000000 { reg = <0x0 0xe1000000 0x0 0x2300000>; @@ -627,6 +642,15 @@ }; &cci0_i2c1 { + camera_imx858_dw9800k: actuator@e { + compatible = "dongwoon,dw9800k"; + reg = <0x0e>; + vdd-supply = <&vreg_afvdd_2p8>; + + dongwoon,sac-mode = <1>; + dongwoon,vcm-prescale = <16>; + }; + /* IMX858 @ 29 */ eeprom@54 { @@ -749,6 +773,8 @@ regulator-name = "vreg_l6p"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1904000>; + /* Pull-up for CCI I2C busses */ + regulator-always-on; }; vreg_l7p: ldo7 { @@ -780,7 +806,16 @@ }; }; - /* AW86927FCR haptics @ 5a */ + vibrator@5a { + compatible = "awinic,aw86927"; + reg = <0x5a>; + + interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&aw86927_int_default>; + pinctrl-names = "default"; + }; }; &i2c2 { @@ -839,6 +874,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; @@ -1318,6 +1358,13 @@ bias-disable; output-high; }; + + aw86927_int_default: aw86927-int-default-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart5 { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 73fce639370c..089a027c57d5 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -13,7 +13,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts index 251e72f11428..bf18c4852081 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts @@ -11,7 +11,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts index eb8efba1b9dd..797f37596bf1 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -14,7 +14,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -118,6 +118,11 @@ no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: rmtfs@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -130,8 +135,6 @@ thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -144,8 +147,6 @@ }; chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -158,8 +159,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -172,8 +171,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -186,8 +183,6 @@ }; rear-cam-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -200,8 +195,6 @@ }; sdm-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -214,8 +207,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -568,6 +559,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &pm7250b_adc { channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; @@ -614,6 +610,46 @@ }; }; +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &pmk8350_adc_tm { status = "okay"; @@ -857,7 +893,7 @@ &uart7 { /delete-property/interrupts; interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; pinctrl-names = "default", "sleep"; @@ -920,10 +956,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_dp_qmpphy_out { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdda-pll-supply = <&vreg_l10c>; vdda18-supply = <&vreg_l1c>; @@ -950,6 +982,16 @@ status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&venus { + firmware-name = "qcom/qcm6490/SHIFT/otter/venus.mbn"; + + status = "okay"; +}; + &wifi { qcom,calibration-variant = "SHIFTphone_8"; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 705ea71b07a1..be67eb173046 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -7,10 +7,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> -#include "sm6150.dtsi" +#include "talos.dtsi" #include "pm8150.dtsi" / { - model = "Qualcomm Technologies, Inc. QCS615 Ride"; + model = "Qualcomm Technologies, Inc. QCS615 Ride (IQ-615 Beta EVK)"; compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150"; chassis-type = "embedded"; @@ -39,6 +39,18 @@ }; }; + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "mini"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge_out>; + }; + }; + }; + vreg_conn_1p8: regulator-conn-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -65,6 +77,64 @@ regulator-always-on; }; + vreg_12p0: regulator-vreg-12p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_1p0: regulator-vreg-1p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_1p8: regulator-vreg-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_3p0: regulator-vreg-3p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_5p0: regulator-vreg-5p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; @@ -288,6 +358,86 @@ }; }; +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + io_expander: pinctrl@3e { + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + semtech,probe-reset; + }; + + i2c-mux@77 { + compatible = "nxp,pca9542"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l11a>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&dsi2dp_bridge_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l5a>; + status = "okay"; +}; + &pcie { perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; @@ -398,6 +548,7 @@ pins = "gpio98"; function = "gpio"; bias-pull-down; + drive-strength = <16>; output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts new file mode 100644 index 000000000000..bb5a42b038f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts @@ -0,0 +1,1095 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kodiak.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ +#include "qcs6490-audioreach.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Radxa Dragon Q6A"; + compatible = "radxa,dragon-q6a", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &uart5; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob_3p296>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + qcom,hphl-jack-type-normally-closed; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb2_1_con: connector-0 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_1_connector: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + }; + + usb2_2_con: connector-1 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_2_connector: endpoint { + remote-endpoint = <&usb_hub_2_2>; + }; + }; + }; + + usb2_3_con: connector-2 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_3_connector: endpoint { + remote-endpoint = <&usb_hub_2_3>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&user_led>; + pinctrl-names = "default"; + + user-led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@84800000 { + reg = <0x0 0x84800000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@87000000 { + reg = <0x0 0x87000000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@88e00000 { + reg = <0x0 0x88e00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@89500000 { + reg = <0x0 0x89500000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@89a00000 { + reg = <0x0 0x89a00000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + thermal-zones { + msm-skin-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + }; + + quiet-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + }; + + ufs-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + }; + + xo-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v_peri: regulator-vcc-5v-peri { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v_peri"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vph_pwr>; + + regulator-boot-on; + regulator-always-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>; + + vreg_s1b_1p84: smps1 { + regulator-name = "vreg_s1b_1p84"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p536: smps7 { + regulator-name = "vreg_s7b_0p536"; + regulator-min-microvolt = <536000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-name = "vreg_s8b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1496000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-name = "vreg_l17b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p84>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p536>; + vdd-bob-supply = <&vph_pwr>; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1976000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3032000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +/* Pin 13, 15 in GPIO header */ +&i2c0 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 27, 28 in GPIO header */ +&i2c2 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 3, 5 in GPIO header */ +&i2c6 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&i2c10 { + qcom,enable-gsi-dma; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t11"; + reg = <0x68>; + }; +}; + +/* External touchscreen */ +&i2c13 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>; + pinctrl-names = "default"; + + /* Support for QPS615 PCIe switch */ + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x400 &apps_smmu 0x1c88 0x1>, + <0x500 &apps_smmu 0x1c89 0x1>, + <0x501 &apps_smmu 0x1c90 0x1>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + pm7325_adc_default: adc-default-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + msm-skin-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + ufs-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_vadc { + pinctrl-0 = <&pm7325_adc_default>; + pinctrl-names = "default"; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = <PM7325_ADC7_DIE_TEMP>; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "msm_skin_therm"; + }; + + channel@14a { + /* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */ + reg = <PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "ufs_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qspi { + /* It's not possible to use QSPI with iommu */ + /* due to an error in qcom_smmu_write_s2cr */ + /delete-property/ iommus; + + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, + <&qspi_data1>, <&qspi_data23>; + pinctrl-1 = <&qspi_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + spi_flash: flash@0 { + compatible = "winbond,w25q256", "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p96>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + compatible = "qcom,qcs6490-rb3gen2-sndcard"; + model = "QCS6490-Radxa-Dragon-Q6A"; + + audio-routing = "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; +}; + +/* Pin 11, 29, 31, 32 in GPIO header */ +&spi7 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 19, 21, 23, 24, 26 in GPIO header */ +&spi12 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 22, 33, 36, 37 in GPIO header */ +&spi14 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&tlmm { + gpio-line-names = + /* GPIO_0 ~ GPIO_3 */ + "PIN_13", "PIN_15", "", "", + /* GPIO_4 ~ GPIO_7 */ + "", "", "", "", + /* GPIO_8 ~ GPIO_11 */ + "PIN_27", "PIN_28", "", "", + /* GPIO_12 ~ GPIO_15 */ + "", "", "", "", + /* GPIO_16 ~ GPIO_19 */ + "", "", "", "", + /* GPIO_20 ~ GPIO_23 */ + "", "", "PIN_8", "PIN_10", + /* GPIO_24 ~ GPIO_27 */ + "PIN_3", "PIN_5", "PIN_16", "PIN_27", + /* GPIO_28 ~ GPIO_31 */ + "PIN_31", "PIN_11", "PIN_32", "PIN_29", + /* GPIO_32 ~ GPIO_35 */ + "", "", "", "", + /* GPIO_36 ~ GPIO_39 */ + "", "", "", "", + /* GPIO_40 ~ GPIO_43 */ + "", "", "", "", + /* GPIO_44 ~ GPIO_47 */ + "", "", "", "", + /* GPIO_48 ~ GPIO_51 */ + "PIN_21", "PIN_19", "PIN_23", "PIN_24", + /* GPIO_52 ~ GPIO_55 */ + "", "", "", "PIN_26", + /* GPIO_56 ~ GPIO_59 */ + "PIN_33", "PIN_22", "PIN_37", "PIN_36", + /* GPIO_60 ~ GPIO_63 */ + "", "", "", "", + /* GPIO_64 ~ GPIO_67 */ + "", "", "", "", + /* GPIO_68 ~ GPIO_71 */ + "", "", "", "", + /* GPIO_72 ~ GPIO_75 */ + "", "", "", "", + /* GPIO_76 ~ GPIO_79 */ + "", "", "", "", + /* GPIO_80 ~ GPIO_83 */ + "", "", "", "", + /* GPIO_84 ~ GPIO_87 */ + "", "", "", "", + /* GPIO_88 ~ GPIO_91 */ + "", "", "", "", + /* GPIO_92 ~ GPIO_95 */ + "", "", "", "", + /* GPIO_96 ~ GPIO_99 */ + "PIN_7", "PIN_12", "PIN_38", "PIN_40", + /* GPIO_100 ~ GPIO_103 */ + "PIN_35", "", "", "", + /* GPIO_104 ~ GPIO_107 */ + "", "", "", "", + /* GPIO_108 ~ GPIO_111 */ + "", "", "", "", + /* GPIO_112 ~ GPIO_115 */ + "", "", "", "", + /* GPIO_116 ~ GPIO_119 */ + "", "", "", "", + /* GPIO_120 ~ GPIO_123 */ + "", "", "", "", + /* GPIO_124 ~ GPIO_127 */ + "", "", "", "", + /* GPIO_128 ~ GPIO_131 */ + "", "", "", "", + /* GPIO_132 ~ GPIO_135 */ + "", "", "", "", + /* GPIO_136 ~ GPIO_139 */ + "", "", "", "", + /* GPIO_140 ~ GPIO_143 */ + "", "", "", "", + /* GPIO_144 ~ GPIO_147 */ + "", "", "", "", + /* GPIO_148 ~ GPIO_151 */ + "", "", "", "", + /* GPIO_152 ~ GPIO_155 */ + "", "", "", "", + /* GPIO_156 ~ GPIO_159 */ + "", "", "", "", + /* GPIO_160 ~ GPIO_163 */ + "", "", "", "", + /* GPIO_164 ~ GPIO_167 */ + "", "", "", "", + /* GPIO_168 ~ GPIO_171 */ + "", "", "", "", + /* GPIO_172 ~ GPIO_174 */ + "", "", ""; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gpio"; + output-disable; + }; + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + user_led: user-led-state { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart5 { + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + /* Onboard USB 2.0 hub */ + usb_hub_2_x: hub@1 { + compatible = "usb1a40,0101"; + reg = <1>; + vdd-supply = <&vcc_5v_peri>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb2_1_connector>; + }; + }; + + port@2 { + reg = <2>; + + usb_hub_2_2: endpoint { + remote-endpoint = <&usb2_2_connector>; + }; + }; + + port@3 { + reg = <3>; + + usb_hub_2_3: endpoint { + remote-endpoint = <&usb2_3_connector>; + }; + }; + }; + + /* FCU760K Wi-Fi & Bluetooth module */ + wifi@4 { + compatible = "usba69c,8d80"; + reg = <4>; + }; + }; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie0_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_clk { + bias-disable; + drive-strength = <16>; +}; + +&qspi_cs0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data23 { + bias-disable; + drive-strength = <8>; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 18cea8812001..f29a352b0288 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -14,7 +14,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" @@ -217,6 +217,13 @@ }; }; + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + thermal-zones { sdm-skin-thermal { thermal-sensors = <&pmk8350_adc_tm 3>; @@ -255,13 +262,6 @@ }; }; - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - wcn6750-pmu { compatible = "qcom,wcn6750-pmu"; pinctrl-0 = <&bt_en>; @@ -335,8 +335,6 @@ vdd-s8-supply = <&vph_pwr>; vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; vdd-l2-l7-supply = <&vreg_bob_3p296>; - vdd-l3-supply = <&vreg_s2b_0p876>; - vdd-l5-supply = <&vreg_s2b_0p876>; vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; vdd-l8-supply = <&vreg_s7b_0p972>; vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; @@ -349,12 +347,6 @@ regulator-max-microvolt = <2040000>; }; - vreg_s2b_0p876: smps2 { - regulator-name = "vreg_s2b_0p876"; - regulator-min-microvolt = <570070>; - regulator-max-microvolt = <1050000>; - }; - vreg_s7b_0p972: smps7 { regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; @@ -385,27 +377,13 @@ vreg_l3b_0p504: ldo3 { regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; - regulator-max-microvolt = <910000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4b_0p752: ldo4 { - regulator-name = "vreg_l4b_0p752"; - regulator-min-microvolt = <752000>; - regulator-max-microvolt = <820000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - reg_l5b_0p752: ldo5 { - regulator-name = "reg_l5b_0p752"; - regulator-min-microvolt = <552000>; - regulator-max-microvolt = <832000>; + regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { regulator-name = "vreg_l6b_1p2"; - regulator-min-microvolt = <1140000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -436,7 +414,7 @@ vreg_l11b_1p504: ldo11 { regulator-name = "vreg_l11b_1p504"; - regulator-min-microvolt = <1504000>; + regulator-min-microvolt = <1776000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -457,7 +435,7 @@ vreg_l14b_1p08: ldo14 { regulator-name = "vreg_l14b_1p08"; - regulator-min-microvolt = <1080000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -521,26 +499,8 @@ vreg_s1c_2p19: smps1 { regulator-name = "vreg_s1c_2p19"; - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vreg_s2c_0p752: smps2 { - regulator-name = "vreg_s2c_0p752"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <800000>; - }; - - vreg_s5c_0p752: smps5 { - regulator-name = "vreg_s5c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <1050000>; - }; - - vreg_s7c_0p752: smps7 { - regulator-name = "vreg_s7c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <800000>; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2208000>; }; vreg_s9c_1p084: smps9 { @@ -600,7 +560,7 @@ vreg_l8c_1p62: ldo8 { regulator-name = "vreg_l8c_1p62"; - regulator-min-microvolt = <1620000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -608,7 +568,7 @@ vreg_l9c_2p96: ldo9 { regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <35440000>; + regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -628,7 +588,7 @@ vreg_l12c_1p65: ldo12 { regulator-name = "vreg_l12c_1p65"; - regulator-min-microvolt = <1650000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -1009,10 +969,12 @@ }; &qupv3_id_0 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index cabb3f508704..9bcb869dd270 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. QCS8300 Ride"; compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 67ba508e92ba..1b9ca957a94b 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> -#include "qcm2290.dtsi" +#include "agatti.dtsi" #include "pm4125.dtsi" / { @@ -188,6 +188,53 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "qcom,qrb2210-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB1-WSA8815-Speaker-DMIC0"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-i2s-dai-link { + link-name = "HDMI/I2S Playback"; + + codec { + sound-dai = <<9611_codec 0>; + }; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + }; }; &cpu_pd0 { @@ -214,10 +261,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qcm2290/a702_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; }; &i2c2_gpio { @@ -323,6 +370,14 @@ status = "okay"; }; +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@18 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -649,7 +704,7 @@ &uart3 { /delete-property/ interrupts; interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + <&tlmm 11 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&uart3_default>; pinctrl-1 = <&uart3_sleep>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index bdf2d66e40c6..0cd36c54632f 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -245,10 +245,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qrb4210/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qrb4210/a610_zap.mbn"; }; &i2c2_gpio { diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index d99448a0732d..71b42e76f03d 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -594,11 +594,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; /* LS-I2C0 */ diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 64e59299672c..d28d69162427 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -149,13 +149,6 @@ enable-active-high; regulator-always-on; }; - - reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - }; }; &apps_rsc { @@ -345,11 +338,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sa8295p/a690_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sa8295p/a690_zap.mbn"; }; &gpu_smmu { diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index ad342d8b7508..1514da636269 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -31,7 +31,7 @@ }; reserved-memory { - zap_mem: zap-shader@80840000 { + gpu_mem: zap-shader@80840000 { reg = <0x0 0x80840000 0 0x2000>; no-map; }; @@ -426,11 +426,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&zap_mem>; - firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso index 49a98676ca4d..6e8da59597b6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* Venus can be used in EL2 if booted similarly to ChromeOS devices. */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 19cf419cf531..0bce3eefca2e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -39,6 +39,7 @@ * */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &xbl_mem; /delete-node/ &aop_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 74ab321d3333..b398f69917f0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -41,6 +41,7 @@ * required by the board dts. */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a0df10a97c7f..45b9864e3304 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1474,6 +1474,12 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sc7180-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; @@ -2179,6 +2185,10 @@ interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3332,6 +3342,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ccd39a1baeda..8cac4ce9c851 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/linux-event-codes.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" @@ -573,7 +573,7 @@ }; }; -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +/* PINCTRL - additions to nodes defined in kodiak.dtsi */ &dp_hot_plug_det { bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7d1d5bbbbbd9..469a5d103e3d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -16,7 +16,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* PMICs depend on spmi_bus label and so must come after SoC */ #include "pm7325.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 08d0784d0cbb..d86a31ddede2 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -151,11 +151,6 @@ no-map; }; - gpu_mem: gpu-region@98715000 { - reg = <0x0 0x98715000 0x0 0x2000>; - no-map; - }; - cdsp_mem: cdsp-region@98900000 { reg = <0x0 0x98900000 0x0 0x1400000>; no-map; @@ -355,11 +350,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 93de9fe918eb..aff398390eba 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -14,6 +14,8 @@ #include "sc8180x.dtsi" #include "sc8180x-pmics.dtsi" +/delete-node/ &gpu_mem; + / { model = "Qualcomm SC8180x Primus"; compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; @@ -442,11 +444,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 85c2afcb417d..8319d892c6e4 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -646,6 +646,11 @@ no-map; }; + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + reserved@9d400000 { reg = <0x0 0x9d400000 0x0 0x1000000>; no-map; @@ -2274,6 +2279,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2530,6 +2539,12 @@ status = "disabled"; }; + refgen: regulator@88e7000 { + compatible = "qcom,sc8180x-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3116,6 +3131,8 @@ phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { @@ -3203,6 +3220,8 @@ phys = <&mdss_dsi1_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 490e970c54a2..c53e00cae465 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -225,11 +225,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -509,11 +504,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso index 25d1fa4bc205..cff3735a12dd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts index 0374251d3329..9819454abe13 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts @@ -158,11 +158,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -600,11 +595,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 637430719e6d..d84ca010ab9d 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -83,14 +83,11 @@ pinctrl-names = "default"; pinctrl-0 = <&cam_indicator_en>; - led-camera-indicator { - label = "white:camera-indicator"; + privacy_led: privacy-led { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_WHITE>; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; default-state = "off"; - /* Reuse as a panic indicator until we get a "camera on" trigger */ panic-indicator; }; }; @@ -283,11 +280,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -685,6 +677,9 @@ pinctrl-names = "default"; pinctrl-0 = <&cam_rgb_default>; + leds = <&privacy_led>; + led-names = "privacy"; + clocks = <&camcc CAMCC_MCLK3_CLK>; orientation = <0>; /* Front facing */ @@ -722,11 +717,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts index aeed3ef152eb..f2b4470d4407 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts @@ -186,11 +186,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -462,11 +457,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts index a40dccd70dfd..00bbeeef6f14 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts @@ -227,11 +227,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -579,11 +574,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 279e5e6beae2..5334adebf278 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -691,6 +691,11 @@ no-map; }; + pil_gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + pil_adsp_mem: adsp-region@86c00000 { reg = <0 0x86c00000 0 0x2000000>; no-map; @@ -967,8 +972,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, - <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -989,8 +994,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, - <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1011,8 +1016,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, - <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1033,8 +1038,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, - <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1069,8 +1074,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, - <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1091,8 +1096,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, - <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1131,8 +1136,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, - <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1153,8 +1158,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, - <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1175,8 +1180,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, - <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1197,8 +1202,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, - <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1241,8 +1246,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, - <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1285,8 +1290,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, - <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1338,7 +1343,7 @@ }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@900000 { compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00900000 0 0x60000>; @@ -1393,8 +1398,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, - <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1415,8 +1420,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1437,8 +1442,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1459,8 +1464,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1481,8 +1486,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1503,8 +1508,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1539,8 +1544,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1561,8 +1566,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1583,8 +1588,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1605,8 +1610,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1627,8 +1632,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1649,8 +1654,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1671,8 +1676,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1693,8 +1698,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1715,8 +1720,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1800,8 +1805,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1822,8 +1827,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1844,8 +1849,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1866,8 +1871,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1888,8 +1893,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1910,8 +1915,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1932,8 +1937,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1954,8 +1959,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1976,8 +1981,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1998,8 +2003,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2020,8 +2025,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2042,8 +2047,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2064,8 +2069,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2086,8 +2091,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2108,8 +2113,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -3366,6 +3371,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&pil_gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3723,6 +3732,12 @@ status = "disabled"; }; + refgen: regulator@8900000 { + compatible = "qcom,sc8280xp-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x08900000 0x0 0x96>; + }; + usb_1_hsphy: phy@8902000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index d01422844fbf..ed55646ca419 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -404,11 +404,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index c33f3de779f6..b8a8dcbdfbe3 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1124,6 +1124,12 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm670-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + mem_noc: interconnect@1380000 { compatible = "qcom,sdm670-mem-noc"; reg = <0 0x01380000 0 0x27200>; @@ -1376,6 +1382,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1926,6 +1936,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -2000,6 +2012,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 8abf3e909502..ce23f87e0316 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -455,10 +455,10 @@ &gpu { status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 99dafc6716e7..0ee2f4b99fbd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -99,26 +99,15 @@ no-map; }; - /* rmtfs lower guard */ - memory@f0800000 { - reg = <0 0xf0800000 0 0x1000>; - no-map; - }; - - rmtfs_mem: memory@f0801000 { + rmtfs_mem: rmtfs-region@f0800000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf0801000 0 0x200000>; + reg = <0 0xf0800000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; - - /* rmtfs upper guard */ - memory@f0a01000 { - reg = <0 0xf0a01000 0 0x1000>; - no-map; - }; }; gpio-keys { @@ -467,10 +456,6 @@ &gpu { status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - }; }; &ipa { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index a12723310c8b..09bfcef42402 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -47,10 +47,8 @@ firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts index d17d4d4d5609..ffe1da2227f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -33,10 +33,8 @@ firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 63d2993536ad..091568642faa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -416,11 +416,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index dcfffb271fcf..db6dd04c51bb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -76,31 +76,19 @@ reserved-memory { /* - * The rmtfs_mem needs to be guarded due to "XPU limitations" - * it is otherwise possible for an allocation adjacent to the - * rmtfs_mem region to trigger an XPU violation, causing a crash. - */ - rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { - no-map; - reg = <0 0xf5b00000 0 0x1000>; - }; - /* * The rmtfs memory region in downstream is 'dynamically allocated' * but given the same address every time. Hard code it as this address is * where the modem firmware expects it to be. */ - rmtfs_mem: rmtfs-mem@f5b01000 { + rmtfs_mem: rmtfs-region@f5b00000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf5b01000 0 0x200000>; + reg = <0 0xf5b00000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; - rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { - no-map; - reg = <0 0xf5d01000 0 0x1000>; - }; /* * It seems like reserving the old rmtfs_mem region is also needed to prevent @@ -162,6 +150,34 @@ enable-active-high; regulator-boot-on; }; + + panel_vci_3v3: panel-vci-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LCD_VCI_3V"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_vci_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; + + panel_vddi_poc_1p8: panel-vddi-poc-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDDI_POC"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_poc_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; }; &adsp_pas { @@ -351,11 +367,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; }; &i2c10 { @@ -429,11 +444,15 @@ reg = <0>; vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&panel_vci_3v3>; + poc-supply = <&panel_vddi_poc_1p8>; + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + pinctrl-0 = <&panel_default>; + pinctrl-1 = <&panel_sleep>; + pinctrl-names = "default", "sleep"; port { panel_in: endpoint { @@ -803,39 +822,78 @@ bias-disable; }; - tri_state_key_default: tri-state-key-default-state { - pins = "gpio40", "gpio42", "gpio26"; + panel_vci_default: vci-state { + pins = "gpio26"; function = "gpio"; - drive-strength = <2>; + drive-strength = <8>; bias-disable; }; - ts_default_pins: ts-int-state { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; - - panel_reset_pins: panel-reset-state { - pins = "gpio6", "gpio25", "gpio26"; + panel_poc_default: poc-state { + pins = "gpio25"; function = "gpio"; drive-strength = <8>; bias-disable; }; - panel_te_pin: panel-te-state { - pins = "gpio10"; - function = "mdp_vsync"; + alert_slider_default: alert-slider-default-state { + pins = "gpio126", "gpio52", "gpio24"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - panel_esd_pin: panel-esd-state { - pins = "gpio30"; + panel_default: panel-default-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + panel_sleep: panel-sleep-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; function = "gpio"; - drive-strength = <2>; - bias-pull-down; + drive-strength = <16>; + bias-pull-up; }; speaker_default: speaker-default-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 7e75decfda05..d6cd873aef0d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -32,7 +32,7 @@ &display_panel { status = "okay"; - compatible = "samsung,s6e3fc2x01"; + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 75a53f0bbebd..5d41a92cfebf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -158,7 +158,7 @@ }; }; - i2c21 { + i2c-21 { compatible = "i2c-gpio"; sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -251,11 +251,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; }; &mdss { @@ -599,15 +598,15 @@ &i2c14 { status = "okay"; - pmic@66 { + max77705: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&pmic_int_default>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; leds { compatible = "maxim,max77705-rgb"; @@ -646,8 +645,8 @@ reg = <0x69>; compatible = "maxim,max77705-charger"; monitored-battery = <&battery>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <0>; }; fuel-gauge@36 { @@ -655,8 +654,8 @@ compatible = "maxim,max77705-battery"; power-supplies = <&max77705_charger>; maxim,rsns-microohm = <5000>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 89260fce6513..ddc2b3ca3bc5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -423,31 +423,29 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; }; &i2c5 { status = "okay"; touchscreen@38 { - compatible = "focaltech,fts8719"; + compatible = "focaltech,ft5452"; reg = <0x38>; - wakeup-source; - interrupt-parent = <&tlmm>; - interrupts = <125 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vreg_l28a_3p0>; - vcc-i2c-supply = <&vreg_l14a_1p88>; - pinctrl-names = "default", "suspend"; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l28a_3p0>; + iovcc-supply = <&vreg_l14a_1p88>; + pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + pinctrl-names = "default", "suspend"; - reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; - irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; touchscreen-size-x = <1080>; touchscreen-size-y = <2160>; }; @@ -479,9 +477,6 @@ vdda-supply = <&vreg_l14a_1p88>; vdd3p3-supply = <&vreg_l28a_3p0>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index f3f4c0900572..7dc9349eedfd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -426,11 +426,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 7480c8d7ac5b..785006a15e97 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -246,11 +246,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1c50a0563bc4..30e88ff010a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -392,11 +392,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 13c9515260ef..bf2f9c04adba 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2218,6 +2218,11 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, @@ -4750,6 +4755,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4824,6 +4831,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4893,6 +4902,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts new file mode 100644 index 000000000000..0ef9ea38a424 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -0,0 +1,971 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Huawei MateBook E 2019 + * + * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd934x.h> +#include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; + +/ { + model = "Huawei MateBook E 2019"; + compatible = "huawei,planck", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + + switch-mode { + label = "Tablet mode switch"; + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led: led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + sw_edp_1p2: regulator-edp-1p2 { + compatible = "regulator-fixed"; + regulator-name = "sw_edp_1p2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + pinctrl-0 = <&sw_edp_1p2_en>; + pinctrl-names = "default"; + + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_l2a_1p2>; + }; + + vlcm_3v3: regulator-vlcm-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vlcm_3v3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + }; + + reserved-memory { + cont_splash_mem: framebuffer@80100000 { + reg = <0 0x80100000 0 0xd00000>; + no-map; + }; + + tz_mem: tz@86d00000 { + reg = <0 0x86d00000 0 0x4600000>; + no-map; + }; + + qseecom_mem: qseecom@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1200000>; + }; + + gpu_mem: gpu@97900000 { + reg = <0 0x97900000 0 0x5000>; + no-map; + }; + + rmtfs_mem: rmtfs@97c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x97c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn"; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p8: smps6 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <1028000>; + regulator-max-microvolt = <1028000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + regulator-always-on; + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + /* 3075000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + /* 3300000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + }; + }; +}; + +&cci_i2c0 { + /* chipnext,cn3927e vcm@0xc */ + /* samsung,s5k3l6 camera@0x10 */ + /* eeprom@0x50 */ +}; + +&cci_i2c1 { + /* galaxycore,gc5025 camera@0x36 */ + /* eeprom@0x50 */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn"; + + status = "okay"; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen: hid@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&i2c5_hid_active>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c7 { + /* ec@0x76 */ +}; + +&i2c10 { + clock-frequency = <400000>; + + status = "okay"; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + pinctrl-0 = <&sn65dsi86_pin_active>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vcca-supply = <&sw_edp_1p2>; + vcc-supply = <&sw_edp_1p2>; + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&vlcm_3v3>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf"; + + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn", + "qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn"; + + status = "okay"; +}; + +&pm8998_gpios { + sw_edp_1p2_en: sw-edp-1p2-en-state { + pins = "gpio9"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + volume_up_gpio: volume-up-gpio-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pwrkey { + status = "okay"; +}; + +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-names = "default"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&slpi_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn"; + + status = "okay"; +}; + +&sound { + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; + model = "HUAWEI-PAK_AL09-M1040"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "DMIC0", "MCLK", + "DMIC0", "MIC BIAS1", + "DMIC2", "MCLK", + "DMIC2", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + + codec { + sound-dai = <&wcd9340 AIF1_CAP>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + + codec { + sound-dai = <&wcd9340 AIF2_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, /* Unused */ + <81 4>; /* SPI (fingerprint reader) */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_hid_active: i2c5-hid-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio79"; + function = "gpio"; + bias-disable; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + + sn65dsi86_pin_active: sn65dsi86-enable-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; + + status = "okay"; +}; + +&usb_2_qmpphy { + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn"; + + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + + swm: soundwire@c85 { + left_spkr: speaker@0,3 { + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,4 { + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,calibration-variant = "Huawei_Planck"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 90efbb7e3799..e41200839dbe 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -356,11 +356,10 @@ }; &gpu { - status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; - }; + status = "okay";}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index 06cacec3461f..6696e1aee243 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -337,11 +337,9 @@ }; &usb { - status = "okay"; -}; - -&usb_dwc3 { dr_mode = "peripheral"; + + status = "okay"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index 75bfc19f412c..eff4c9055d66 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -1019,12 +1019,9 @@ }; }; - usb: usb@a6f8800 { - compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a6f8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb: usb@a600000 { + compatible = "qcom,sdx75-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -1041,21 +1038,35 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + iommus = <&apps_smmu 0x80 0x0>; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + power-domains = <&gcc GCC_USB30_GDSC>; resets = <&gcc GCC_USB30_BCR>; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1063,38 +1074,25 @@ interconnect-names = "usb-ddr", "apps-usb"; + usb-role-switch; + status = "disabled"; - usb_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a600000 0x0 0xcd00>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x80 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - phys = <&usb_hsphy>, - <&usb_qmpphy>; - phy-names = "usb2-phy", - "usb3-phy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_1_dwc3_hs: endpoint { - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_dwc3_ss: endpoint { - }; + usb_1_dwc3_ss: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index ad347ccd1975..466ad409e924 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -121,10 +121,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 91fc36b59abf..5e2032c26ea3 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1745,7 +1745,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index c17545111f49..be1f550fd7b5 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -67,10 +67,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8459b27cacc7..f34dc6e278b8 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1175,18 +1175,47 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { @@ -1768,6 +1797,12 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm6350-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm6350-qmp-usb3-dp-phy"; reg = <0x0 0x088e8000 0x0 0x3000>; @@ -2158,6 +2193,8 @@ power-domains = <&dispcc MDSS_GDSC>; iommus = <&apps_smmu 0x800 0x2>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + #address-cells = <2>; #size-cells = <2>; ranges; @@ -2360,6 +2397,8 @@ phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 0faa3a40ff82..87d6600ccbd9 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -971,6 +971,12 @@ status = "disabled"; }; + refgen: regulator@162f000 { + compatible = "qcom,sm6375-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0162f000 0x0 0x84>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x01c40000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts index f16b47b6a74c..cb59c122f6f6 100644 --- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts +++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts @@ -978,6 +978,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7325.dtsi b/arch/arm64/boot/dts/qcom/sm7325.dtsi index 85d34b53e5e9..beb279956df6 100644 --- a/arch/arm64/boot/dts/qcom/sm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7325.dtsi @@ -4,7 +4,7 @@ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com> */ -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* SM7325 uses Kryo 670 */ &cpu0 { compatible = "qcom,kryo670"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index acdba79612aa..e3ec99972a28 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2255,7 +2255,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3469,6 +3469,12 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8150-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8150-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3992,6 +3998,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4085,6 +4093,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7f592bd30248..51779b99176d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -484,11 +484,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi index cf3d917addd8..ef7ea4f72bf9 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi @@ -159,7 +159,8 @@ }; &tlmm { - gpio-reserved-ranges = <40 4>; /* I2C (Unused) */ + gpio-reserved-ranges = <20 4>, /* SPI (fingerprint scanner) */ + <40 4>; /* Unused */ }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 465fd6e954a3..c017399297b9 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -554,11 +554,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts index 4ad24974c09f..078ba13f8762 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts @@ -424,11 +424,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; }; &i2c11 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 50dd11432bb2..c7dffa440074 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2944,7 +2944,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3901,6 +3901,11 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -4679,6 +4684,8 @@ iommus = <&apps_smmu 0x820 0x402>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + status = "disabled"; #address-cells = <2>; @@ -4873,6 +4880,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4967,6 +4976,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 24a8c91e9f70..5f975d009465 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -403,10 +403,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8350/a660_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8350/a660_zap.mbn"; }; &i2c13 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index fc4ce9d4977e..5c8fe213f5e4 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2051,7 +2051,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 0c6aa7ddf432..268ae0cd642a 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -643,10 +643,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8450/a730_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8450/a730_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 23420e692472..920a2d1c04d0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2047,25 +2047,28 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ + /* 2.5 GT/s x1 */ opp-2500000 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 2 x1 */ + /* 5 GT/s x1 */ opp-5000000 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ + /* 8 GT/s x1 */ opp-8000000 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; }; @@ -2209,46 +2212,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2434,7 +2459,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso new file mode 100644 index 000000000000..66bec0fef766 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SM8550-HDK Rear Camera Card overlay + * + * Copyright (c) 2025, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,sm8550-camcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/dts-v1/; +/plugin/; + +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index b5d7f0cd443a..599850c48494 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -955,10 +955,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 38f2928f23cc..f430038bd402 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -642,10 +642,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &i2c_master_hub_0 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index a3f4200a1145..05c98fe2c25b 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -716,6 +716,52 @@ }; }; +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + port@3 { + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + &i2c_master_hub_0 { status = "okay"; }; @@ -789,10 +835,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 7724dba75db7..2ca9e50ef599 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2027,39 +2027,52 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -2194,46 +2207,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2456,7 +2491,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; @@ -3189,6 +3224,7 @@ &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; bus-width = <4>; + max-sd-hs-hz = <37500000>; dma-coherent; /* Forbid SDR104/SDR50 - broken hw! */ @@ -4277,6 +4313,150 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam0_sleep: cam0-sleep-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam1_sleep: cam1-sleep-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam2_default: cam2-default-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam2_sleep: cam2-sleep-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam3_default: cam3-default-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam3_sleep: cam3-sleep-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam4_default: cam4-default-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam4_sleep: cam4-sleep-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam5_default: cam5-default-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam5_sleep: cam5-sleep-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam6_default: cam6-default-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam6_sleep: cam6-sleep-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam7_default: cam7-default-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam7_sleep: cam7-sleep-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + cci0_0_default: cci0-0-default-state { sda-pins { pins = "gpio110"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index 87d7190dc991..5bf1af3308ce 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -900,10 +900,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 9e790cf44804..b2feac61a89f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -830,10 +830,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index ebf1971b1bfb..07ae74851621 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -3659,39 +3659,52 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -3839,46 +3852,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -3988,6 +4023,8 @@ iommus = <&apps_smmu 0x60 0>; + dma-coherent; + lanes-per-direction = <2>; qcom,ice = <&ice>; @@ -4121,7 +4158,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index 3bbb53b7c71f..c8cb521b4c26 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -191,6 +191,51 @@ }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -960,9 +1005,6 @@ }; &pcie0 { - wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -977,6 +1019,9 @@ }; &pcieport0 { + wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -1200,3 +1245,31 @@ status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index 13c7b9664c89..b0cb61c5a603 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -193,6 +193,51 @@ }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -1054,3 +1099,31 @@ status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index a82d9867c7cb..3f0b57f428bb 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> @@ -635,7 +636,7 @@ <0>, <0>, <0>, - <0>; + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -2581,6 +2582,164 @@ }; }; + usb_hsphy: phy@88e3000 { + compatible = "qcom,sm8750-m31-eusb2-phy"; + reg = <0x0 0x88e3000 0x0 0x29c>; + + clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8750-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsrcc TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb: usb@a600000 { + compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x40 0x0>; + + phys = <&usb_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index 3d2a1cb02b62..d1dbfa3bd81c 100644 --- a/arch/arm64/boot/dts/qcom/sm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,qcs615-camcc.h> #include <dt-bindings/clock/qcom,qcs615-dispcc.h> #include <dt-bindings/clock/qcom,qcs615-gcc.h> @@ -11,6 +12,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +41,10 @@ clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_0: l2-cache { compatible = "cache"; @@ -60,6 +66,10 @@ next-level-cache = <&l2_100>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_100: l2-cache { compatible = "cache"; @@ -81,6 +91,10 @@ next-level-cache = <&l2_200>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_200: l2-cache { compatible = "cache"; @@ -102,6 +116,10 @@ next-level-cache = <&l2_300>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_300: l2-cache { compatible = "cache"; @@ -123,6 +141,10 @@ next-level-cache = <&l2_400>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_400: l2-cache { compatible = "cache"; @@ -144,6 +166,10 @@ next-level-cache = <&l2_500>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_500: l2-cache { compatible = "cache"; @@ -166,6 +192,10 @@ clocks = <&cpufreq_hw 1>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_600: l2-cache { compatible = "cache"; @@ -187,6 +217,10 @@ next-level-cache = <&l2_700>; clocks = <&cpufreq_hw 1>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_700: l2-cache { compatible = "cache"; @@ -239,6 +273,111 @@ }; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 4) (300000 * 16)>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <(451000 * 4) (806400 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(547000 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-peak-kBps = <(1017000 * 4) (1363200 * 16)>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(451000 * 4) (300000 * 16)>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <109440000>; + opp-peak-kBps = <(1017600 * 4) (940800 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1017600 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + }; + dummy_eud: dummy-sink { compatible = "arm,coresight-dummy-sink"; @@ -3657,14 +3796,191 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm6150-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_CORE_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupts-extended = <&mdss 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0 0x0ae94400 0x0 0x100>, + <0x0 0x0ae94500 0x0 0x300>, + <0x0 0x0ae94800 0x0 0x124>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,qcs615-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, - <0>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, <0>, <0>; @@ -3978,6 +4294,16 @@ }; }; + osm_l3: interconnect@18321000 { + compatible = "qcom,qcs615-osm-l3", "qcom,sm8150-osm-l3", "qcom,osm-l3"; + reg = <0x0 0x18321000 0x0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,qcs615-qusb2-phy"; reg = <0x0 0x88e2000 0x0 0x180>; diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi index ee3c8c5e2c50..8e5c5575a532 100644 --- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -11,10 +11,9 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { - model = "ASUS Zenbook A14"; chassis-type = "laptop"; aliases { @@ -1005,14 +1004,10 @@ status = "okay"; aux-bus { - panel { + panel: panel { compatible = "edp-panel"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - port { edp_panel_in: endpoint { remote-endpoint = <&mdss_dp3_out>; diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 3c9455fede5c..ded96fb43489 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 CRD"; @@ -82,6 +82,13 @@ <&tlmm 123 GPIO_ACTIVE_HIGH>, <&tlmm 125 GPIO_ACTIVE_HIGH>; + nvmem-cells = <&charge_limit_en>, + <&charge_limit_end>, + <&charge_limit_delta>; + nvmem-cell-names = "charge_limit_en", + "charge_limit_end", + "charge_limit_delta"; + /* Left-side rear port */ connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi index cc64558ed5e6..bf04a12b16bc 100644 --- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi @@ -12,7 +12,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { chassis-type = "laptop"; @@ -1023,7 +1023,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1032,13 +1031,15 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { /delete-property/ #sound-dai-cells; + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + status = "okay"; aux-bus { diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index bfc649d4b643..a9643cd746d5 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows"; @@ -763,10 +763,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 654cbce9d6ec..80ece9db875a 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -12,8 +12,8 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo ThinkPad T14s Gen 6"; @@ -722,10 +722,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 0113d856b3ad..d4df21de0d95 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -11,8 +11,8 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "ASUS Vivobook S 15"; @@ -479,10 +479,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts index 0d0bcc50207d..0408ade7150f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -6,12 +6,71 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407RA)"; compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &gpu { @@ -22,6 +81,31 @@ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + }; +}; + +&panel { + compatible = "samsung,atna40cu11", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; +}; + &remoteproc_adsp { firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; @@ -35,3 +119,21 @@ status = "okay"; }; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index dfc378e1a056..429deffcf3e9 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -5,7 +5,7 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-crd.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts index cf2a7c262888..75e10d97c386 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts index 32ad9679550e..a8ff7ef258a1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 58f8caaa7258..2f533e56c8c8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -12,8 +12,8 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Dell XPS 13 9345"; @@ -676,10 +676,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts index 4ea00d823693..0b3b6cb23e1a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -9,10 +9,8 @@ compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; }; -&gpu { - zap-shader { - firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; }; &remoteproc_adsp { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index e5a839d45840..b79e59e1c413 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -6,8 +6,8 @@ /dts-v1/; -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include "x1-hp-omnibook-x14.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index e0642fe8343f..4c31d14a07bc 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -9,8 +9,8 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo Yoga Slim 7x"; @@ -799,10 +799,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index ed468b93ba50..7e1e808ea983 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -9,8 +9,8 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { aliases { @@ -861,11 +861,11 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_microcode_mem>; - firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 4a9b6d791e7f..b742aabd9c04 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 QCP"; @@ -831,10 +831,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts new file mode 100644 index 000000000000..be756069131d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com> + */ + +/dts-v1/; + +#include "x1p42100-asus-zenbook-a14.dtsi" + +/ { + model = "ASUS Zenbook A14 (UX3407QA, LCD)"; + compatible = "asus,zenbook-a14-ux3407qa-lcd", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 416667>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_bl_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&panel { + backlight = <&backlight>; +}; + +&pmc8380_3_gpios { + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts index bd75ff898601..68cd318d6907 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts @@ -6,136 +6,17 @@ /dts-v1/; -#include "x1p42100.dtsi" -#include "x1-asus-zenbook-a14.dtsi" - -/delete-node/ &pmc8380_6; -/delete-node/ &pmc8380_6_thermal; +#include "x1p42100-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407QA)"; - compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; - - wcn6855-pmu { - compatible = "qcom,wcn6855-pmu"; - - vddaon-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_wcn_1p9>; - vddpcie1p3-supply = <&vreg_wcn_1p9>; - vddpcie1p9-supply = <&vreg_wcn_1p9>; - vddpmu-supply = <&vreg_wcn_0p95>; - vddpmucx-supply = <&vreg_wcn_0p95>; - vddpmumx-supply = <&vreg_wcn_0p95>; - vddrfa0p95-supply = <&vreg_wcn_0p95>; - vddrfa1p3-supply = <&vreg_wcn_1p9>; - vddrfa1p9-supply = <&vreg_wcn_1p9>; - - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn_0p8: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn_0p8"; - }; - - vreg_pmu_aon_0p8: ldo1 { - regulator-name = "vreg_pmu_aon_0p8"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p8: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p8"; - }; - - vreg_pmu_btcmx_0p8: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p8"; - }; - - vreg_pmu_pcie_1p8: ldo5 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo6 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_rfa_0p8: ldo7 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo8 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo9 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - }; - }; + compatible = "asus,zenbook-a14-ux3407qa-oled", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; }; -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; -}; - -&pcie4_port0 { - wifi@0 { - compatible = "pci17cb,1103"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - - qcom,calibration-variant = "UX3407Q"; - }; -}; - -&remoteproc_adsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; - - status = "okay"; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn6855-bt"; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; +&panel { + compatible = "samsung,atna40ct06", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - max-speed = <3000000>; - }; + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi new file mode 100644 index 000000000000..22470a97e1e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com> + */ + +/dts-v1/; + +#include "purwa.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + qcom,calibration-variant = "UX3407Q"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts index cf999c2cf8d4..7ed4116b9590 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts @@ -5,7 +5,7 @@ /dts-v1/; -#include "x1p42100.dtsi" +#include "purwa.dtsi" #include "x1-crd.dtsi" /delete-node/ &pmc8380_6; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts index 6696cab2de3e..0f338e457abd 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts @@ -2,8 +2,8 @@ /dts-v1/; -#include "x1p42100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "purwa.dtsi" +#include "hamoa-pmics.dtsi" #include "x1-hp-omnibook-x14.dtsi" /delete-node/ &pmc8380_6; /delete-node/ &pmc8380_6_thermal; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts index 1ac46cdc4386..3186e79e862d 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts @@ -13,8 +13,8 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1p42100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "purwa.dtsi" +#include "hamoa-pmics.dtsi" /delete-node/ &pmc8380_6; /delete-node/ &pmc8380_6_thermal; |