diff options
Diffstat (limited to 'arch/arm64/boot/dts')
488 files changed, 39686 insertions, 3976 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index b0844404eda1..98ec8f1b76e4 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += axiado subdir-y += bitmain subdir-y += blaize subdir-y += broadcom +subdir-y += bst subdir-y += cavium subdir-y += cix subdir-y += exynos diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index ceedae9e399b..8d1110c14bad 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -305,6 +305,42 @@ }; /omit-if-no-ref/ + nand_pins: nand-pins { + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "nand0"; + }; + + /omit-if-no-ref/ + nand_cs0_pin: nand-cs0-pin { + pins = "PC4"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_cs1_pin: nand-cs1-pin { + pins = "PC3"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb0_pin: nand-rb0-pin { + pins = "PC6"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb1_pin: nand-rb1-pin { + pins = "PC7"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ spi0_pins: spi0-pins { pins = "PC0", "PC2", "PC4"; function = "spi0"; @@ -377,6 +413,22 @@ #iommu-cells = <1>; }; + nfc: nand-controller@4011000 { + compatible = "allwinner,sun50i-h616-nand-controller"; + reg = <0x04011000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>, + <&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>; + clock-names = "ahb", "mod", "ecc", "mbus"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 10>; + dma-names = "rxtx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h616-mmc", "allwinner,sun50i-a100-mmc"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 7b36c47a3a13..42dab01e3f56 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -145,6 +145,14 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + i2s2_pi_pins: i2s2-pi-pins { + pins = "PI2", "PI3", "PI4", "PI5"; + allwinner,pinmux = <5>; + function = "i2s2"; + bias-disable; + }; + mmc0_pins: mmc0-pins { pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; allwinner,pinmux = <2>; @@ -182,6 +190,30 @@ bias-disable; }; + rgmii1_pins: rgmii1-pins { + pins = "PJ0", "PJ1", "PJ2", "PJ3", "PJ4", + "PJ5", "PJ6", "PJ7", "PJ8", "PJ9", + "PJ11", "PJ12", "PJ13", "PJ14", "PJ15"; + allwinner,pinmux = <5>; + function = "gmac1"; + drive-strength = <40>; + bias-disable; + }; + + /omit-if-no-ref/ + spdif_out_pb_pin: spdif-pb-pin { + pins = "PB8"; + function = "spdif"; + allwinner,pinmux = <2>; + }; + + /omit-if-no-ref/ + spdif_out_pi_pin: spdif-pi-pin { + pins = "PI10"; + function = "spdif"; + allwinner,pinmux = <2>; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; allwinner,pinmux = <2>; @@ -231,6 +263,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 14>, <&dma 14>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -242,6 +276,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -253,6 +289,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 16>, <&dma 16>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -264,6 +302,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 17>, <&dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -275,6 +315,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; + dmas = <&dma 18>, <&dma 18>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -286,6 +328,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; + dmas = <&dma 19>, <&dma 19>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -297,6 +341,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART6>; resets = <&ccu RST_BUS_UART6>; + dmas = <&dma 20>, <&dma 20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -308,6 +354,8 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART7>; resets = <&ccu RST_BUS_UART7>; + dmas = <&dma 21>, <&dma 21>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -319,6 +367,8 @@ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -332,6 +382,8 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -345,6 +397,8 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -358,6 +412,8 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -371,6 +427,8 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; + dmas = <&dma 47>, <&dma 47>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -384,6 +442,8 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C5>; resets = <&ccu RST_BUS_I2C5>; + dmas = <&dma 48>, <&dma 48>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -398,6 +458,19 @@ ranges; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun55i-a523-dma", + "allwinner,sun50i-a100-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <54>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + sid: efuse@3006000 { compatible = "allwinner,sun55i-a523-sid", "allwinner,sun50i-a64-sid"; @@ -603,6 +676,51 @@ }; }; + gmac1: ethernet@4510000 { + compatible = "allwinner,sun55i-a523-gmac200", + "snps,dwmac-4.20a"; + reg = <0x04510000 0x10000>; + clocks = <&ccu CLK_BUS_EMAC1>, <&ccu CLK_MBUS_EMAC1>; + clock-names = "stmmaceth", "mbus"; + resets = <&ccu RST_BUS_EMAC1>; + reset-names = "stmmaceth"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins>; + power-domains = <&pck600 PD_VO1>; + syscon = <&syscon>; + snps,fixed-burst; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + + queue0 {}; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 16 8 4>; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + + queue0 {}; + }; + }; + ppu: power-controller@7001400 { compatible = "allwinner,sun55i-a523-ppu"; reg = <0x07001400 0x400>; @@ -674,6 +792,8 @@ reg = <0x07081400 0x400>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_BUS_R_I2C0>; + dmas = <&dma 49>, <&dma 49>; + dma-names = "rx", "tx"; resets = <&r_ccu RST_BUS_R_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; @@ -720,6 +840,90 @@ #reset-cells = <1>; }; + i2s0: i2s@7112000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07112000 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S0>, <&mcu_ccu CLK_MCU_I2S0>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S0>; + dmas = <&mcu_dma 3>, <&mcu_dma 3>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1: i2s@7113000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07113000 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S1>, <&mcu_ccu CLK_MCU_I2S1>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S1>; + dmas = <&mcu_dma 4>, <&mcu_dma 4>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@7114000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07114000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S2>, <&mcu_ccu CLK_MCU_I2S2>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S2>; + dmas = <&mcu_dma 5>, <&mcu_dma 5>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3: i2s@7115000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07115000 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S3>, <&mcu_ccu CLK_MCU_I2S3>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S3>; + dmas = <&mcu_dma 6>, <&mcu_dma 6>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif: spdif@7116000 { + compatible = "allwinner,sun55i-a523-spdif"; + reg = <0x07116000 0x400>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_SPDIF>, + <&mcu_ccu CLK_MCU_SPDIF_TX>, + <&mcu_ccu CLK_MCU_SPDIF_RX>; + clock-names = "apb", "tx", "rx"; + resets = <&mcu_ccu RST_BUS_MCU_SPDIF>; + dmas = <&mcu_dma 2>, <&mcu_dma 2>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + mcu_dma: dma-controller@7121000 { + compatible = "allwinner,sun55i-a523-mcu-dma", + "allwinner,sun50i-a100-dma"; + reg = <0x07121000 0x1000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mcu_ccu CLK_BUS_MCU_DMA>, <&mcu_ccu CLK_MCU_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <15>; + resets = <&mcu_ccu RST_BUS_MCU_DMA>; + #dma-cells = <1>; + }; + npu: npu@7122000 { compatible = "vivante,gc"; reg = <0x07122000 0x1000>; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts index f82a8d121697..bfdf1728cd14 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -14,6 +14,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; }; @@ -75,7 +76,7 @@ &gmac0 { phy-mode = "rgmii-id"; - phy-handle = <&ext_rgmii_phy>; + phy-handle = <&ext_rgmii0_phy>; phy-supply = <®_cldo3>; allwinner,tx-delay-ps = <300>; @@ -84,13 +85,24 @@ status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii1_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <300>; + rx-internal-delay-ps = <400>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; &mdio0 { - ext_rgmii_phy: ethernet-phy@1 { + ext_rgmii0_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ @@ -99,6 +111,16 @@ }; }; +&mdio1 { + ext_rgmii1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ @@ -250,6 +272,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-pj-phy"; + /* enough time for the PHY to fully power on */ + regulator-enable-ramp-delay = <150000>; }; reg_cpusldo: cpusldo { diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts index 1b054fa8ef74..054d0357c139 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts @@ -13,6 +13,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; }; @@ -73,7 +74,7 @@ &gmac0 { phy-mode = "rgmii-id"; - phy-handle = <&ext_rgmii_phy>; + phy-handle = <&ext_rgmii0_phy>; phy-supply = <®_dcdc4>; allwinner,tx-delay-ps = <100>; @@ -82,13 +83,24 @@ status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii1_phy>; + phy-supply = <®_dcdc4>; + + tx-internal-delay-ps = <100>; + rx-internal-delay-ps = <100>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; &mdio0 { - ext_rgmii_phy: ethernet-phy@1 { + ext_rgmii0_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ @@ -97,6 +109,16 @@ }; }; +&mdio1 { + ext_rgmii1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts index 39a4e194712a..9e6b21cf293e 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -15,6 +15,7 @@ compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527"; aliases { + ethernet0 = &gmac1; serial0 = &uart0; }; @@ -102,11 +103,33 @@ status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <0>; + rx-internal-delay-ps = <300>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; +&mdio1 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupts-extended = <&pio 8 16 IRQ_TYPE_LEVEL_LOW>; /* PI16 */ + reset-gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index effd242f6bf7..657e986e5dba 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -630,6 +630,15 @@ interrupts = <5 4>; }; + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; qspi: spi@ff8d2000 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 4eee777ef1a1..58f776e411fc 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -50,19 +50,6 @@ regulator-min-microvolt = <330000>; regulator-max-microvolt = <330000>; }; - - soc@0 { - eccmgr { - sdmmca-ecc@ff8c8c00 { - compatible = "altr,socfpga-s10-sdmmc-ecc", - "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c8c00 0x100>; - altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; - }; - }; - }; }; &pinctrl0 { @@ -190,6 +177,8 @@ cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 7c53cb9621e5..92954c5beb54 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -50,19 +50,6 @@ regulator-min-microvolt = <330000>; regulator-max-microvolt = <330000>; }; - - soc@0 { - eccmgr { - sdmmca-ecc@ff8c8c00 { - compatible = "altr,socfpga-s10-sdmmc-ecc", - "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c8c00 0x100>; - altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; - }; - }; - }; }; &gpio1 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index ad52e8a0b9ba..5ba6ca4ef19a 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -62,7 +62,6 @@ &gmac0 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &gmac1 { @@ -73,7 +72,6 @@ &gmac2 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &mmc { @@ -104,5 +102,4 @@ &sysmgr { reg = <0xffd12000 0x1000>; - interrupts = <0x0 0x10 0x4>; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 619dce79b020..219fb088c704 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-tx9-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi index b1da8cbaa25a..2b12d8284594 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi @@ -5,6 +5,7 @@ #include "amlogic-a4-common.dtsi" #include "amlogic-a5-reset.h" +#include <dt-bindings/pinctrl/amlogic,pinctrl.h> #include <dt-bindings/power/amlogic,a5-pwrc.h> / { cpus { @@ -58,6 +59,95 @@ #reset-cells = <1>; }; + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-a5", + "amlogic,pinctrl-a4"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x300>; + + gpioz: gpio@c0 { + reg = <0x0 0xc0 0x0 0x40>, + <0x0 0x18 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>; + }; + + gpiox: gpio@100 { + reg = <0x0 0x100 0x0 0x40>, + <0x0 0xc 0x0 0xc>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpiot: gpio@140 { + reg = <0x0 0x140 0x0 0x40>, + <0x0 0x2c 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 14>; + }; + + gpiod: gpio@180 { + reg = <0x0 0x180 0x0 0x40>, + <0x0 0x40 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>; + }; + + gpioe: gpio@1c0 { + reg = <0x0 0x1c0 0x0 0x40>, + <0x0 0x48 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0x0 0x200 0x0 0x40>, + <0x0 0x24 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 11>; + }; + + gpiob: gpio@240 { + reg = <0x0 0x240 0x0 0x40>, + <0x0 0x0 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpioh: gpio@280 { + reg = <0x0 0x280 0x0 0x40>, + <0x0 0x4c 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 5>; + }; + + gpio_test_n: gpio@2c0 { + reg = <0x0 0x2c0 0x0 0x40>, + <0x0 0x3c 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + }; + gpio_intc: interrupt-controller@4080 { compatible = "amlogic,a5-gpio-intc", "amlogic,meson-gpio-intc"; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts index 45f8631f9feb..e026604c55e6 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uart_b; spi0 = &spifc; + i2c2 = &i2c2; }; memory@0 { @@ -146,6 +147,36 @@ regulator-boot-on; regulator-always-on; }; + + camera_vdddo_1v8: regulator-camera-1v8 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDDO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + camera_vdda_2v9: regulator-camera-2v9 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDA"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + vin-supply = <&vcc_5v>; + regulator-boot-on; + regulator-always-on; + }; + + camera_vddd_1v2: regulator-camera-1v2 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { @@ -258,3 +289,56 @@ vmmc-supply = <&sdcard>; vqmmc-supply = <&sdcard>; }; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins1>; + clock-frequency = <100000>; /* default 100k */ + + imx290: sensor0@1a { + compatible = "sony,imx290"; + reg = <0x1a>; + clocks = <&clkc_pll CLKID_MCLK0>; + clock-names = "xclk"; + clock-frequency = <37125000>; + assigned-clocks = <&clkc_pll CLKID_MCLK_PLL>, + <&clkc_pll CLKID_MCLK0>; + assigned-clock-rates = <74250000>, <37125000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v9>; + vddd-supply = <&camera_vddd_1v2>; + + reset-gpios = <&gpio GPIOE_4 GPIO_ACTIVE_LOW>; + + port { + imx290_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <222750000 148500000>; + remote-endpoint = <&c3_mipi_csi_in>; + }; + }; + }; +}; + +&csi2 { + status = "okay"; + + ports { + port@0 { + c3_mipi_csi_in: endpoint { + remote-endpoint = <&imx290_out>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&adap { + status = "okay"; +}; + +&isp { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 07aaaf71ea9a..13b7ac03f9b2 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -1031,5 +1031,93 @@ #size-cells = <0>; }; }; + + csi2: csi2@ff018000 { + compatible = "amlogic,c3-mipi-csi2"; + reg = <0x0 0xff018000 0x0 0x100>, + <0x0 0xff019000 0x0 0x300>, + <0x0 0xff01a000 0x0 0x100>; + reg-names = "aphy", "dphy", "host"; + power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_CSI_PHY0>; + clock-names = "vapb", "phy0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_CSI_PHY0>; + assigned-clock-rates = <0>, <200000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + c3_mipi_csi_out: endpoint { + remote-endpoint = <&c3_adap_in>; + }; + }; + }; + }; + + adap: adap@ff010000 { + compatible = "amlogic,c3-mipi-adapter"; + reg = <0x0 0xff010000 0x0 0x100>, + <0x0 0xff01b000 0x0 0x100>, + <0x0 0xff01d000 0x0 0x200>; + reg-names = "top", "fd", "rd"; + power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + clock-names = "vapb", "isp0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + assigned-clock-rates = <0>, <400000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + c3_adap_in: endpoint { + remote-endpoint = <&c3_mipi_csi_out>; + }; + }; + + port@1 { + reg = <1>; + c3_adap_out: endpoint { + remote-endpoint = <&c3_isp_in>; + }; + }; + }; + }; + + isp: isp@ff000000 { + compatible = "amlogic,c3-isp"; + reg = <0x0 0xff000000 0x0 0xf000>; + reg-names = "isp"; + power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + clock-names = "vapb", "isp0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + assigned-clock-rates = <0>, <400000000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + + port { + c3_isp_in: endpoint { + remote-endpoint = <&c3_adap_out>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi index 5f602f1170c0..8ef631939033 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/amlogic,pinctrl.h> +#include <dt-bindings/power/amlogic,s6-pwrc.h> / { cpus { #address-cells = <2>; @@ -41,6 +42,15 @@ }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s6-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -189,6 +199,24 @@ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s6-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s6-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi index d262c0b66e4b..a3faf4d188e1 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/amlogic,pinctrl.h> +#include <dt-bindings/power/amlogic,s7-pwrc.h> / { cpus { @@ -79,6 +80,15 @@ }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s7-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -211,6 +221,24 @@ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s7-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s7-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi index c4d260d5bb58..0c4417bcd682 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/amlogic,pinctrl.h> +#include <dt-bindings/power/amlogic,s7d-pwrc.h> / { cpus { @@ -43,6 +44,15 @@ }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s7d-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -184,6 +194,24 @@ gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s7d-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s7d-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04fb130ac7c6..e95c91894968 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -208,7 +208,7 @@ reg = <0x0 0xf9800000 0x0 0x400000>, <0x0 0xff646000 0x0 0x2000>, <0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -234,7 +234,7 @@ reg = <0x0 0xfa000000 0x0 0x400000>, <0x0 0xff648000 0x0 0x2000>, <0x0 0xfa400000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index dcc927a9da80..ca455f634834 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -138,7 +138,7 @@ reg = <0x0 0xfc000000 0x0 0x400000>, <0x0 0xff648000 0x0 0x2000>, <0x0 0xfc400000 0x0 0x200000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index f04efa828256..23358d94844c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -87,7 +87,7 @@ i-cache-line-size = <32>; i-cache-size = <0x8000>; i-cache-sets = <32>; - next-level-cache = <&l2_cache_l>; + next-level-cache = <&l2_cache_b>; #cooling-cells = <2>; }; @@ -103,7 +103,7 @@ i-cache-line-size = <32>; i-cache-size = <0x8000>; i-cache-sets = <32>; - next-level-cache = <&l2_cache_l>; + next-level-cache = <&l2_cache_b>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts new file mode 100644 index 000000000000..9a62176cfe5a --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> + +/ { + compatible = "oranth,tx9-pro", "amlogic,s912", "amlogic,meson-gxm"; + model = "Tanix TX9 Pro"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-tanix-tx3mini"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index b8f256545022..3e0319fdb93f 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -18,11 +18,21 @@ #include "bcm2712-rpi-5-b-ovl-rp1.dts" +/ { + aliases { + ethernet0 = &rp1_eth; + }; +}; + &pcie2 { #include "rp1-nexus.dtsi" }; &rp1_eth { + assigned-clocks = <&rp1_clocks RP1_CLK_ETH_TSU>, + <&rp1_clocks RP1_CLK_ETH>; + assigned-clock-rates = <50000000>, + <125000000>; status = "okay"; phy-mode = "rgmii-id"; phy-handle = <&phy1>; diff --git a/arch/arm64/boot/dts/bst/Makefile b/arch/arm64/boot/dts/bst/Makefile new file mode 100644 index 000000000000..4c1b8b4cdad8 --- /dev/null +++ b/arch/arm64/boot/dts/bst/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BST) += bstc1200-cdcu1.0-adas_4c2g.dtb diff --git a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts new file mode 100644 index 000000000000..5eb9ef369d8c --- /dev/null +++ b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "bstc1200.dtsi" + +/ { + model = "BST C1200-96 CDCU1.0 4C2G"; + compatible = "bst,c1200-cdcu1.0-adas-4c2g", "bst,c1200"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@810000000 { + device_type = "memory"; + reg = <0x8 0x10000000 0x0 0x30000000>, + <0x8 0xc0000000 0x1 0x0>, + <0xc 0x00000000 0x0 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/bst/bstc1200.dtsi b/arch/arm64/boot/dts/bst/bstc1200.dtsi new file mode 100644 index 000000000000..dd13c6bfc3c8 --- /dev/null +++ b/arch/arm64/boot/dts/bst/bstc1200.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "bst,c1200"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x200>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x300>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + l2_cache: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + uart0: serial@20008000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20008000 0x0 0x1000>; + clock-frequency = <25000000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + gic: interrupt-controller@32800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x32800000 0x0 0x10000>, + <0x0 0x32880000 0x0 0x100000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + always-on; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts index d74964d53c3b..4dee8cd0b86d 100644 --- a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts +++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts @@ -7,6 +7,8 @@ /dts-v1/; #include "sky1.dtsi" +#include "sky1-pinfunc.h" + / { model = "Radxa Orion O6"; compatible = "radxa,orion-o6", "cix,sky1"; @@ -34,6 +36,56 @@ }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog-cfg { + pins { + pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>, + <CIX_PAD_GPIO145_FUNC_GPIO145>, + <CIX_PAD_GPIO146_FUNC_GPIO146>, + <CIX_PAD_GPIO147_FUNC_GPIO147>; + bias-pull-down; + drive-strength = <8>; + }; + }; +}; + +&iomuxc_s5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_s5>; + + pinctrl_hog_s5: hog-s5-cfg { + pins { + pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>; + bias-pull-up; + drive-strength = <8>; + + }; + }; +}; + +&pcie_x8_rc { + status = "okay"; +}; + +&pcie_x4_rc { + status = "okay"; +}; + +&pcie_x2_rc { + status = "okay"; +}; + +&pcie_x1_0_rc { + status = "okay"; +}; + +&pcie_x1_1_rc { + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/cix/sky1-pinfunc.h b/arch/arm64/boot/dts/cix/sky1-pinfunc.h new file mode 100644 index 000000000000..ebe9f6fef403 --- /dev/null +++ b/arch/arm64/boot/dts/cix/sky1-pinfunc.h @@ -0,0 +1,401 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright 2024-2025 Cix Technology Group Co., Ltd. + */ + +#ifndef __CIX_SKY1_H +#define __CIX_SKY1_H + +/* s5 pads */ +#define CIX_PAD_GPIO001_FUNC_GPIO001 (0 << 8 | 0x0) +#define CIX_PAD_GPIO002_FUNC_GPIO002 (1 << 8 | 0x0) +#define CIX_PAD_GPIO003_FUNC_GPIO003 (2 << 8 | 0x0) +#define CIX_PAD_GPIO004_FUNC_GPIO004 (3 << 8 | 0x0) +#define CIX_PAD_GPIO005_FUNC_GPIO005 (4 << 8 | 0x0) +#define CIX_PAD_GPIO006_FUNC_GPIO006 (5 << 8 | 0x0) +#define CIX_PAD_GPIO007_FUNC_GPIO007 (6 << 8 | 0x0) +#define CIX_PAD_GPIO008_FUNC_GPIO008 (7 << 8 | 0x0) +#define CIX_PAD_GPIO009_FUNC_GPIO009 (8 << 8 | 0x0) +#define CIX_PAD_GPIO010_FUNC_GPIO010 (9 << 8 | 0x0) +#define CIX_PAD_GPIO011_FUNC_GPIO011 (10 << 8 | 0x0) +#define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) +#define CIX_PAD_GPIO013_FUNC_GPIO013 (12 << 8 | 0x0) +#define CIX_PAD_GPIO014_FUNC_GPIO014 (13 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I2C0_SCL (28 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I3C0_SCL (28 << 8 | 0x1) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I2C0_SDA (29 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I3C0_SDA (29 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I2C1_SCL (30 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I3C1_SCL (30 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_SPI_CS0 (30 << 8 | 0x2) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I2C1_SDA (31 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I3C1_SDA (31 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_SPI_CS1 (31 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO0_FUNC_GPIO015 (32 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_SPI_SCK (32 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_GPIO0 (32 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO1_FUNC_GPIO016 (33 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_SPI_MOSI (33 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_GPIO1 (33 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO2_FUNC_GPIO017 (34 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_SPI_MISO (34 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_GPIO2 (34 << 8 | 0x2) +#define CIX_PAD_GPIO018_FUNC_SFI_GPIO3 (35 << 8 | 0x0) +#define CIX_PAD_GPIO018_FUNC_GPIO018 (35 << 8 | 0x1) +#define CIX_PAD_GPIO019_FUNC_SFI_GPIO4 (36 << 8 | 0x0) +#define CIX_PAD_GPIO019_FUNC_GPIO019 (36 << 8 | 0x1) +#define CIX_PAD_GPIO020_FUNC_SFI_GPIO5 (37 << 8 | 0x0) +#define CIX_PAD_GPIO020_FUNC_GPIO020 (37 << 8 | 0x1) +#define CIX_PAD_GPIO021_FUNC_SFI_GPIO6 (38 << 8 | 0x0) +#define CIX_PAD_GPIO021_FUNC_GPIO021 (38 << 8 | 0x1) +#define CIX_PAD_GPIO022_FUNC_SFI_GPIO7 (39 << 8 | 0x0) +#define CIX_PAD_GPIO022_FUNC_GPIO022 (39 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_GPIO8 (40 << 8 | 0x0) +#define CIX_PAD_GPIO023_FUNC_GPIO023 (40 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_I3C0_PUR_EN_L (40 << 8 | 0x2) +#define CIX_PAD_GPIO024_FUNC_SFI_GPIO9 (41 << 8 | 0x0) +#define CIX_PAD_GPIO024_FUNC_GPIO024 (41 << 8 | 0x1) +#define CIX_PAD_GPIO024_FUNC_SFI_I3C1_PUR_EN_L (41 << 8 | 0x2) +#define CIX_PAD_SPI1_MISO_FUNC_SPI1_MISO (42 << 8 | 0x0) +#define CIX_PAD_SPI1_MISO_FUNC_GPIO025 (42 << 8 | 0x1) +#define CIX_PAD_SPI1_CS0_FUNC_SPI1_CS0 (43 << 8 | 0x0) +#define CIX_PAD_SPI1_CS0_FUNC_GPIO026 (43 << 8 | 0x1) +#define CIX_PAD_SPI1_CS1_FUNC_SPI1_CS1 (44 << 8 | 0x0) +#define CIX_PAD_SPI1_CS1_FUNC_GPIO027 (44 << 8 | 0x1) +#define CIX_PAD_SPI1_MOSI_FUNC_SPI1_MOSI (45 << 8 | 0x0) +#define CIX_PAD_SPI1_MOSI_FUNC_GPIO028 (45 << 8 | 0x1) +#define CIX_PAD_SPI1_CLK_FUNC_SPI1_CLK (46 << 8 | 0x0) +#define CIX_PAD_SPI1_CLK_FUNC_GPIO029 (46 << 8 | 0x1) +#define CIX_PAD_GPIO030_FUNC_GPIO030 (47 << 8 | 0x0) +#define CIX_PAD_GPIO030_FUNC_USB_OC0_L (47 << 8 | 0x1) +#define CIX_PAD_GPIO031_FUNC_GPIO031 (48 << 8 | 0x0) +#define CIX_PAD_GPIO031_FUNC_USB_OC1_L (48 << 8 | 0x1) +#define CIX_PAD_GPIO032_FUNC_GPIO032 (49 << 8 | 0x0) +#define CIX_PAD_GPIO032_FUNC_USB_OC2_L (49 << 8 | 0x1) +#define CIX_PAD_GPIO033_FUNC_GPIO033 (50 << 8 | 0x0) +#define CIX_PAD_GPIO033_FUNC_USB_OC3_L (50 << 8 | 0x1) +#define CIX_PAD_GPIO034_FUNC_GPIO034 (51 << 8 | 0x0) +#define CIX_PAD_GPIO034_FUNC_USB_OC4_L (51 << 8 | 0x1) +#define CIX_PAD_GPIO035_FUNC_GPIO035 (52 << 8 | 0x0) +#define CIX_PAD_GPIO035_FUNC_USB_OC5_L (52 << 8 | 0x1) +#define CIX_PAD_GPIO036_FUNC_GPIO036 (53 << 8 | 0x0) +#define CIX_PAD_GPIO036_FUNC_USB_OC6_L (53 << 8 | 0x1) +#define CIX_PAD_GPIO037_FUNC_GPIO037 (54 << 8 | 0x0) +#define CIX_PAD_GPIO037_FUNC_USB_OC7_L (54 << 8 | 0x1) +#define CIX_PAD_GPIO038_FUNC_GPIO038 (55 << 8 | 0x0) +#define CIX_PAD_GPIO038_FUNC_USB_OC8_L (55 << 8 | 0x1) +#define CIX_PAD_GPIO039_FUNC_GPIO039 (56 << 8 | 0x0) +#define CIX_PAD_GPIO039_FUNC_USB_OC9_L (56 << 8 | 0x1) +#define CIX_PAD_GPIO040_FUNC_GPIO040 (57 << 8 | 0x0) +#define CIX_PAD_GPIO040_FUNC_USB_DRIVE_VBUS0 (57 << 8 | 0x1) +#define CIX_PAD_GPIO041_FUNC_GPIO041 (58 << 8 | 0x0) +#define CIX_PAD_GPIO041_FUNC_USB_DRIVE_VBUS4 (58 << 8 | 0x1) +#define CIX_PAD_GPIO042_FUNC_GPIO042 (59 << 8 | 0x0) +#define CIX_PAD_GPIO042_FUNC_USB_DRIVE_VBUS5 (59 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CLK_FUNC_SE_QSPI_CLK (60 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CLK_FUNC_QSPI_CLK (60 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_SE_QSPI_CS_L (61 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_QSPI_CS_L (61 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_SE_QSPI_DATA0 (62 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_QSPI_DATA0 (62 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_SE_QSPI_DATA1 (63 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_QSPI_DATA1 (63 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_SE_QSPI_DATA2 (64 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_QSPI_DATA2 (64 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_SE_QSPI_DATA3 (65 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_QSPI_DATA3 (65 << 8 | 0x1) +/* s0 pads */ +#define CIX_PAD_GPIO043_FUNC_GPIO043 (0 << 8 | 0x0) +#define CIX_PAD_GPIO044_FUNC_GPIO044 (1 << 8 | 0x0) +#define CIX_PAD_GPIO045_FUNC_GPIO045 (2 << 8 | 0x0) +#define CIX_PAD_GPIO046_FUNC_GPIO046 (3 << 8 | 0x0) +#define CIX_PAD_DP2_DIGON_FUNC_DP2_DIGON (18 << 8 | 0x0) +#define CIX_PAD_DP2_BLON_FUNC_DP2_BLON (19 << 8 | 0x0) +#define CIX_PAD_DP2_VARY_BL_FUNC_DP2_VARY_BL (20 << 8 | 0x0) +#define CIX_PAD_I2C7_SCL_FUNC_I2C7_SCL (21 << 8 | 0x0) +#define CIX_PAD_I2C7_SDA_FUNC_I2C7_SDA (22 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_I2C5_SCL (26 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_GPIO047 (26 << 8 | 0x1) +#define CIX_PAD_I2C5_SDA_FUNC_I2C5_SDA (27 << 8 | 0x0) +#define CIX_PAD_I2C5_SDA_FUNC_GPIO048 (27 << 8 | 0x1) +#define CIX_PAD_I2C6_SCL_FUNC_I2C6_SCL (28 << 8 | 0x0) +#define CIX_PAD_I2C6_SCL_FUNC_GPIO049 (28 << 8 | 0x1) +#define CIX_PAD_I2C6_SDA_FUNC_I2C6_SDA (29 << 8 | 0x0) +#define CIX_PAD_I2C6_SDA_FUNC_GPIO050 (29 << 8 | 0x1) +#define CIX_PAD_I2C0_CLK_FUNC_I2C0_CLK (30 << 8 | 0x0) +#define CIX_PAD_I2C0_CLK_FUNC_GPIO051 (30 << 8 | 0x1) +#define CIX_PAD_I2C0_SDA_FUNC_I2C0_SDA (31 << 8 | 0x0) +#define CIX_PAD_I2C0_SDA_FUNC_GPIO052 (31 << 8 | 0x1) +#define CIX_PAD_I2C1_CLK_FUNC_I2C1_CLK (32 << 8 | 0x0) +#define CIX_PAD_I2C1_CLK_FUNC_GPIO053 (32 << 8 | 0x1) +#define CIX_PAD_I2C1_SDA_FUNC_I2C1_SDA (33 << 8 | 0x0) +#define CIX_PAD_I2C1_SDA_FUNC_GPIO054 (33 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_I2C2_SCL (34 << 8 | 0x0) +#define CIX_PAD_I2C2_SCL_FUNC_I3C0_SCL (34 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_GPIO055 (34 << 8 | 0x2) +#define CIX_PAD_I2C2_SDA_FUNC_I2C2_SDA (35 << 8 | 0x0) +#define CIX_PAD_I2C2_SDA_FUNC_I3C0_SDA (35 << 8 | 0x1) +#define CIX_PAD_I2C2_SDA_FUNC_GPIO056 (35 << 8 | 0x2) +#define CIX_PAD_GPIO057_FUNC_GPIO057 (36 << 8 | 0x0) +#define CIX_PAD_GPIO057_FUNC_I3C0_PUR_EN_L (36 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_I2C3_CLK (37 << 8 | 0x0) +#define CIX_PAD_I2C3_CLK_FUNC_I3C1_CLK (37 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_GPIO058 (37 << 8 | 0x2) +#define CIX_PAD_I2C3_SDA_FUNC_I2C3_SDA (38 << 8 | 0x0) +#define CIX_PAD_I2C3_SDA_FUNC_I3C1_SDA (38 << 8 | 0x1) +#define CIX_PAD_I2C3_SDA_FUNC_GPIO059 (38 << 8 | 0x2) +#define CIX_PAD_GPIO060_FUNC_GPIO060 (39 << 8 | 0x0) +#define CIX_PAD_GPIO060_FUNC_I3C1_PUR_EN_L (39 << 8 | 0x1) +#define CIX_PAD_I2C4_CLK_FUNC_I2C4_CLK (40 << 8 | 0x0) +#define CIX_PAD_I2C4_CLK_FUNC_GPIO061 (40 << 8 | 0x1) +#define CIX_PAD_I2C4_SDA_FUNC_I2C4_SDA (41 << 8 | 0x0) +#define CIX_PAD_I2C4_SDA_FUNC_GPIO062 (41 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_HDA_BITCLK (42 << 8 | 0x0) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S0_SCK (42 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S9_RSCK_DBG (42 << 8 | 0x2) +#define CIX_PAD_HDA_RST_L_FUNC_HDA_RST_L (43 << 8 | 0x0) +#define CIX_PAD_HDA_RST_L_FUNC_I2S0_DATA_IN (43 << 8 | 0x1) +#define CIX_PAD_HDA_RST_L_FUNC_I2S9_DATA_IN0_DBG (43 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN0_FUNC_HDA_SDIN0 (44 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S0_MCLK (44 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S9_TSCK_DBG (44 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT0_FUNC_HDA_SDOUT0 (45 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S0_DATA_OUT (45 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S9_TWS_DBG (45 << 8 | 0x2) +#define CIX_PAD_HDA_SYNC_FUNC_HDA_SYNC (46 << 8 | 0x0) +#define CIX_PAD_HDA_SYNC_FUNC_I2S0_WS (46 << 8 | 0x1) +#define CIX_PAD_HDA_SYNC_FUNC_I2S9_RWS_DBG (46 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN1_FUNC_HDA_SDIN1 (47 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN1_FUNC_GPIO063 (47 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN1_FUNC_I2S9_DATA_IN1_DBG (47 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT1_FUNC_HDA_SDOUT1 (48 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT1_FUNC_GPIO064 (48 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT1_FUNC_I2S9_DATA_OUT0_DBG (48 << 8 | 0x2) +#define CIX_PAD_I2S1_MCLK_FUNC_I2S1_MCLK (49 << 8 | 0x0) +#define CIX_PAD_I2S1_MCLK_FUNC_GPIO065 (49 << 8 | 0x1) +#define CIX_PAD_I2S1_SCK_FUNC_I2S1_SCK (50 << 8 | 0x0) +#define CIX_PAD_I2S1_SCK_FUNC_GPIO066 (50 << 8 | 0x1) +#define CIX_PAD_I2S1_WS_FUNC_I2S1_WS (51 << 8 | 0x0) +#define CIX_PAD_I2S1_WS_FUNC_GPIO067 (51 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_IN_FUNC_I2S1_DATA_IN (52 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_IN_FUNC_GPIO068 (52 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_I2S1_DATA_OUT (53 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_GPIO069 (53 << 8 | 0x1) +#define CIX_PAD_I2S2_MCLK_FUNC_I2S2_MCLK (54 << 8 | 0x0) +#define CIX_PAD_I2S2_MCLK_FUNC_GPIO070 (54 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S2_RSCK (55 << 8 | 0x0) +#define CIX_PAD_I2S2_RSCK_FUNC_GPIO071 (55 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S5_RSCK_DBG (55 << 8 | 0x2) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S6_RSCK_DBG (55 << 8 | 0x3) +#define CIX_PAD_I2S2_RWS_FUNC_I2S2_RWS (56 << 8 | 0x0) +#define CIX_PAD_I2S2_RWS_FUNC_GPIO072 (56 << 8 | 0x1) +#define CIX_PAD_I2S2_RWS_FUNC_I2S5_RWS_DBG (56 << 8 | 0x2) +#define CIX_PAD_I2S2_RWS_FUNC_I2S6_RWS_DBG (56 << 8 | 0x3) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S2_TSCK (57 << 8 | 0x0) +#define CIX_PAD_I2S2_TSCK_FUNC_GPIO073 (57 << 8 | 0x1) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S5_TSCK_DBG (57 << 8 | 0x2) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S6_TSCK_DBG (57 << 8 | 0x3) +#define CIX_PAD_I2S2_TWS_FUNC_I2S2_TWS (58 << 8 | 0x0) +#define CIX_PAD_I2S2_TWS_FUNC_GPIO074 (58 << 8 | 0x1) +#define CIX_PAD_I2S2_TWS_FUNC_I2S5_TWS_DBG (58 << 8 | 0x2) +#define CIX_PAD_I2S2_TWS_FUNC_I2S6_TWS_DBG (58 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S2_DATA_IN0 (59 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_GPIO075 (59 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S5_DATA_IN0_DBG (59 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S6_DATA_IN0_DBG (59 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S2_DATA_IN1 (60 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_GPIO076 (60 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S5_DATA_IN1_DBG (60 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S6_DATA_IN1_DBG (60 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S2_DATA_OUT0 (61 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_GPIO077 (61 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S5_DATA_OUT0_DBG (61 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S6_DATA_OUT0_DBG (61 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S2_DATA_OUT1 (62 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_GPIO078 (62 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S5_DATA_OUT1_DBG (62 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S6_DATA_OUT1_DBG (62 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_I2S2_DATA_OUT2 (63 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_GPIO079 (63 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S2_DATA_OUT3 (64 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_GPIO080 (64 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S9_DATA_OUT1_DBG (64 << 8 | 0x2) +#define CIX_PAD_I2S3_MCLK_FUNC_I2S3_MCLK (65 << 8 | 0x0) +#define CIX_PAD_I2S3_MCLK_FUNC_GPIO081 (65 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S3_RSCK (66 << 8 | 0x0) +#define CIX_PAD_I2S3_RSCK_FUNC_GPIO082 (66 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S7_RSCK_DBG (66 << 8 | 0x2) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S8_RSCK_DBG (66 << 8 | 0x3) +#define CIX_PAD_I2S3_RWS_FUNC_I2S3_RWS (67 << 8 | 0x0) +#define CIX_PAD_I2S3_RWS_FUNC_GPIO083 (67 << 8 | 0x1) +#define CIX_PAD_I2S3_RWS_FUNC_I2S7_RWS_DBG (67 << 8 | 0x2) +#define CIX_PAD_I2S3_RWS_FUNC_I2S8_RWS_DBG (67 << 8 | 0x3) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S3_TSCK (68 << 8 | 0x0) +#define CIX_PAD_I2S3_TSCK_FUNC_GPIO084 (68 << 8 | 0x1) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S7_TSCK_DBG (68 << 8 | 0x2) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S8_TSCK_DBG (68 << 8 | 0x3) +#define CIX_PAD_I2S3_TWS_FUNC_I2S3_TWS (69 << 8 | 0x0) +#define CIX_PAD_I2S3_TWS_FUNC_GPIO085 (69 << 8 | 0x1) +#define CIX_PAD_I2S3_TWS_FUNC_I2S7_TWS_DBG (69 << 8 | 0x2) +#define CIX_PAD_I2S3_TWS_FUNC_I2S8_TWS_DBG (69 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S3_DATA_IN0 (70 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_GPIO086 (70 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S7_DATA_IN0_DBG (70 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S8_DATA_IN0_DBG (70 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S3_DATA_IN1 (71 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_GPIO087 (71 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S7_DATA_IN1_DBG (71 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S8_DATA_IN1_DBG (71 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S3_DATA_OUT0 (72 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_GPIO088 (72 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S7_DATA_OUT0_DBG (72 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S8_DATA_OUT0_DBG (72 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S3_DATA_OUT1 (73 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_GPIO089 (73 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S7_DATA_OUT1_DBG (73 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S8_DATA_OUT1_DBG (73 << 8 | 0x3) +#define CIX_PAD_GPIO090_FUNC_GPIO090 (74 << 8 | 0x0) +#define CIX_PAD_GPIO090_FUNC_I2S4_MCLK_LB (74 << 8 | 0x1) +#define CIX_PAD_GPIO091_FUNC_GPIO091 (75 << 8 | 0x0) +#define CIX_PAD_GPIO091_FUNC_I2S4_SCK_LB (75 << 8 | 0x1) +#define CIX_PAD_GPIO092_FUNC_GPIO092 (76 << 8 | 0x0) +#define CIX_PAD_GPIO092_FUNC_I2S4_WS_LB (76 << 8 | 0x1) +#define CIX_PAD_GPIO093_FUNC_GPIO093 (77 << 8 | 0x0) +#define CIX_PAD_GPIO093_FUNC_I2S4_DATA_IN_LB (77 << 8 | 0x1) +#define CIX_PAD_GPIO094_FUNC_GPIO094 (78 << 8 | 0x0) +#define CIX_PAD_GPIO094_FUNC_I2S4_DATA_OUT_LB (78 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_UART0_TXD (79 << 8 | 0x0) +#define CIX_PAD_UART0_TXD_FUNC_PWM0 (79 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_GPIO095 (79 << 8 | 0x2) +#define CIX_PAD_UART0_RXD_FUNC_UART0_RXD (80 << 8 | 0x0) +#define CIX_PAD_UART0_RXD_FUNC_PWM1 (80 << 8 | 0x1) +#define CIX_PAD_UART0_RXD_FUNC_GPIO096 (80 << 8 | 0x2) +#define CIX_PAD_UART0_CTS_FUNC_UART0_CTS (81 << 8 | 0x0) +#define CIX_PAD_UART0_CTS_FUNC_FAN_OUT2 (81 << 8 | 0x1) +#define CIX_PAD_UART0_CTS_FUNC_GPIO097 (81 << 8 | 0x2) +#define CIX_PAD_UART0_RTS_FUNC_UART0_RTS (82 << 8 | 0x0) +#define CIX_PAD_UART0_RTS_FUNC_FAN_TACH2 (82 << 8 | 0x1) +#define CIX_PAD_UART0_RTS_FUNC_GPIO098 (82 << 8 | 0x2) +#define CIX_PAD_UART1_TXD_FUNC_UART1_TXD (83 << 8 | 0x0) +#define CIX_PAD_UART1_TXD_FUNC_FAN_OUT0 (83 << 8 | 0x1) +#define CIX_PAD_UART1_TXD_FUNC_GPIO099 (83 << 8 | 0x2) +#define CIX_PAD_UART1_RXD_FUNC_UART1_RXD (84 << 8 | 0x0) +#define CIX_PAD_UART1_RXD_FUNC_FAN_TACH0 (84 << 8 | 0x1) +#define CIX_PAD_UART1_RXD_FUNC_GPIO100 (84 << 8 | 0x2) +#define CIX_PAD_UART1_CTS_FUNC_UART1_CTS (85 << 8 | 0x0) +#define CIX_PAD_UART1_CTS_FUNC_FAN_OUT1 (85 << 8 | 0x1) +#define CIX_PAD_UART1_CTS_FUNC_GPIO101 (85 << 8 | 0x2) +#define CIX_PAD_UART1_RTS_FUNC_UART1_RTS (86 << 8 | 0x0) +#define CIX_PAD_UART1_RTS_FUNC_FAN_TACH1 (86 << 8 | 0x1) +#define CIX_PAD_UART1_RTS_FUNC_GPIO102 (86 << 8 | 0x2) +#define CIX_PAD_UART2_TXD_FUNC_UART2_TXD (87 << 8 | 0x0) +#define CIX_PAD_UART2_TXD_FUNC_GPIO103 (87 << 8 | 0x1) +#define CIX_PAD_UART2_RXD_FUNC_UART2_RXD (88 << 8 | 0x0) +#define CIX_PAD_UART2_RXD_FUNC_GPIO104 (88 << 8 | 0x1) +#define CIX_PAD_UART3_TXD_FUNC_UART3_TXD (89 << 8 | 0x0) +#define CIX_PAD_UART3_TXD_FUNC_GPIO105 (89 << 8 | 0x1) +#define CIX_PAD_UART3_RXD_FUNC_UART3_RXD (90 << 8 | 0x0) +#define CIX_PAD_UART3_RXD_FUNC_GPIO106 (90 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_UART3_CTS (91 << 8 | 0x0) +#define CIX_PAD_UART3_CTS_FUNC_GPIO107 (91 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_TRIGIN0 (91 << 8 | 0x2) +#define CIX_PAD_UART3_RTS_FUNC_UART3_RTS (92 << 8 | 0x0) +#define CIX_PAD_UART3_RTS_FUNC_GPIO108 (92 << 8 | 0x1) +#define CIX_PAD_UART3_RTS_FUNC_TRIGIN1 (92 << 8 | 0x2) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_UART4_CSU_PM_TXD (93 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_GPIO109 (93 << 8 | 0x1) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_UART4_CSU_PM_RXD (94 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_GPIO110 (94 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_UART5_CSU_SE_TXD (95 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_GPIO111 (95 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_UART5_CSU_SE_RXD (96 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_GPIO112 (96 << 8 | 0x1) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_UART6_CSU_SE_RXD (97 << 8 | 0x0) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_GPIO113 (97 << 8 | 0x1) +#define CIX_PAD_CLK_REQ0_L_FUNC_CLK_REQ0_L (98 << 8 | 0x0) +#define CIX_PAD_CLK_REQ0_L_FUNC_GPIO114 (98 << 8 | 0x1) +#define CIX_PAD_CLK_REQ2_L_FUNC_CLK_REQ2_L (99 << 8 | 0x0) +#define CIX_PAD_CLK_REQ2_L_FUNC_GPIO115 (99 << 8 | 0x1) +#define CIX_PAD_CLK_REQ4_L_FUNC_CLK_REQ4_L (100 << 8 | 0x0) +#define CIX_PAD_CLK_REQ4_L_FUNC_GPIO116 (100 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK0_FUNC_CSI0_MCLK0 (101 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK0_FUNC_GPIO117 (101 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK1_FUNC_CSI0_MCLK1 (102 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK1_FUNC_GPIO118 (102 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK0_FUNC_CSI1_MCLK0 (103 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK0_FUNC_GPIO119 (103 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK1_FUNC_CSI1_MCLK1 (104 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK1_FUNC_GPIO120 (104 << 8 | 0x1) +#define CIX_PAD_GPIO121_FUNC_GPIO121 (105 << 8 | 0x0) +#define CIX_PAD_GPIO121_FUNC_GMAC0_REFCLK_25M (105 << 8 | 0x1) +#define CIX_PAD_GPIO122_FUNC_GPIO122 (106 << 8 | 0x0) +#define CIX_PAD_GPIO122_FUNC_GMAC0_TX_CTL (106 << 8 | 0x1) +#define CIX_PAD_GPIO123_FUNC_GPIO123 (107 << 8 | 0x0) +#define CIX_PAD_GPIO123_FUNC_GMAC0_TXD0 (107 << 8 | 0x1) +#define CIX_PAD_GPIO124_FUNC_GPIO124 (108 << 8 | 0x0) +#define CIX_PAD_GPIO124_FUNC_GMAC0_TXD1 (108 << 8 | 0x1) +#define CIX_PAD_GPIO125_FUNC_GPIO125 (109 << 8 | 0x0) +#define CIX_PAD_GPIO125_FUNC_GMAC0_TXD2 (109 << 8 | 0x1) +#define CIX_PAD_GPIO126_FUNC_GPIO126 (110 << 8 | 0x0) +#define CIX_PAD_GPIO126_FUNC_GMAC0_TXD3 (110 << 8 | 0x1) +#define CIX_PAD_GPIO127_FUNC_GPIO127 (111 << 8 | 0x0) +#define CIX_PAD_GPIO127_FUNC_GMAC0_TX_CLK (111 << 8 | 0x1) +#define CIX_PAD_GPIO128_FUNC_GPIO128 (112 << 8 | 0x0) +#define CIX_PAD_GPIO128_FUNC_GMAC0_RX_CTL (112 << 8 | 0x1) +#define CIX_PAD_GPIO129_FUNC_GPIO129 (113 << 8 | 0x0) +#define CIX_PAD_GPIO129_FUNC_GMAC0_RXD0 (113 << 8 | 0x1) +#define CIX_PAD_GPIO130_FUNC_GPIO130 (114 << 8 | 0x0) +#define CIX_PAD_GPIO130_FUNC_GMAC0_RXD1 (114 << 8 | 0x1) +#define CIX_PAD_GPIO131_FUNC_GPIO131 (115 << 8 | 0x0) +#define CIX_PAD_GPIO131_FUNC_GMAC0_RXD2 (115 << 8 | 0x1) +#define CIX_PAD_GPIO132_FUNC_GPIO132 (116 << 8 | 0x0) +#define CIX_PAD_GPIO132_FUNC_GMAC0_RXD3 (116 << 8 | 0x1) +#define CIX_PAD_GPIO133_FUNC_GPIO133 (117 << 8 | 0x0) +#define CIX_PAD_GPIO133_FUNC_GMAC0_RX_CLK (117 << 8 | 0x1) +#define CIX_PAD_GPIO134_FUNC_GPIO134 (118 << 8 | 0x0) +#define CIX_PAD_GPIO134_FUNC_GMAC0_MDC (118 << 8 | 0x1) +#define CIX_PAD_GPIO135_FUNC_GPIO135 (119 << 8 | 0x0) +#define CIX_PAD_GPIO135_FUNC_GMAC0_MDIO (119 << 8 | 0x1) +#define CIX_PAD_GPIO136_FUNC_GPIO136 (120 << 8 | 0x0) +#define CIX_PAD_GPIO136_FUNC_GMAC1_REFCLK_25M (120 << 8 | 0x1) +#define CIX_PAD_GPIO137_FUNC_GPIO137 (121 << 8 | 0x0) +#define CIX_PAD_GPIO137_FUNC_GMAC1_TX_CTL (121 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_GPIO138 (122 << 8 | 0x0) +#define CIX_PAD_GPIO138_FUNC_GMAC1_TXD0 (122 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_SPI2_MISO (122 << 8 | 0x2) +#define CIX_PAD_GPIO139_FUNC_GPIO139 (123 << 8 | 0x0) +#define CIX_PAD_GPIO139_FUNC_GMAC1_TXD1 (123 << 8 | 0x1) +#define CIX_PAD_GPIO139_FUNC_SPI2_CS0 (123 << 8 | 0x2) +#define CIX_PAD_GPIO140_FUNC_GPIO140 (124 << 8 | 0x0) +#define CIX_PAD_GPIO140_FUNC_GMAC1_TXD2 (124 << 8 | 0x1) +#define CIX_PAD_GPIO140_FUNC_SPI2_CS1 (124 << 8 | 0x2) +#define CIX_PAD_GPIO141_FUNC_GPIO141 (125 << 8 | 0x0) +#define CIX_PAD_GPIO141_FUNC_GMAC1_TXD3 (125 << 8 | 0x1) +#define CIX_PAD_GPIO141_FUNC_SPI2_MOSI (125 << 8 | 0x2) +#define CIX_PAD_GPIO142_FUNC_GPIO142 (126 << 8 | 0x0) +#define CIX_PAD_GPIO142_FUNC_GMAC1_TX_CLK (126 << 8 | 0x1) +#define CIX_PAD_GPIO142_FUNC_SPI2_CLK (126 << 8 | 0x2) +#define CIX_PAD_GPIO143_FUNC_GPIO143 (127 << 8 | 0x0) +#define CIX_PAD_GPIO143_FUNC_GMAC1_RX_CTL (127 << 8 | 0x1) +#define CIX_PAD_GPIO144_FUNC_GPIO144 (128 << 8 | 0x0) +#define CIX_PAD_GPIO144_FUNC_GMAC1_RXD0 (128 << 8 | 0x1) +#define CIX_PAD_GPIO145_FUNC_GPIO145 (129 << 8 | 0x0) +#define CIX_PAD_GPIO145_FUNC_GMAC1_RXD1 (129 << 8 | 0x1) +#define CIX_PAD_GPIO146_FUNC_GPIO146 (130 << 8 | 0x0) +#define CIX_PAD_GPIO146_FUNC_GMAC1_RXD2 (130 << 8 | 0x1) +#define CIX_PAD_GPIO147_FUNC_GPIO147 (131 << 8 | 0x0) +#define CIX_PAD_GPIO147_FUNC_GMAC1_RXD3 (131 << 8 | 0x1) +#define CIX_PAD_GPIO148_FUNC_GPIO148 (132 << 8 | 0x0) +#define CIX_PAD_GPIO148_FUNC_GMAC1_RX_CLK (132 << 8 | 0x1) +#define CIX_PAD_GPIO149_FUNC_GPIO149 (133 << 8 | 0x0) +#define CIX_PAD_GPIO149_FUNC_GMAC1_MDC (133 << 8 | 0x1) +#define CIX_PAD_GPIO150_FUNC_GPIO150 (134 << 8 | 0x0) +#define CIX_PAD_GPIO150_FUNC_GMAC1_MDIO (134 << 8 | 0x1) +#define CIX_PAD_GPIO151_FUNC_GPIO151 (135 << 8 | 0x0) +#define CIX_PAD_GPIO151_FUNC_PM_GPIO0 (135 << 8 | 0x1) +#define CIX_PAD_GPIO152_FUNC_GPIO152 (136 << 8 | 0x0) +#define CIX_PAD_GPIO152_FUNC_PM_GPIO1 (136 << 8 | 0x1) +#define CIX_PAD_GPIO153_FUNC_GPIO153 (137 << 8 | 0x0) +#define CIX_PAD_GPIO153_FUNC_PM_GPIO2 (137 << 8 | 0x1) + +#endif diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index 2fb2c99c0796..64b76905cbff 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -264,6 +264,26 @@ status = "disabled"; }; + spi0: spi@4090000 { + compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6"; + reg = <0x0 0x04090000 0x0 0x10000>; + clocks = <&scmi_clk CLK_TREE_FCH_SPI0_APB>, + <&scmi_clk CLK_TREE_FCH_SPI0_APB>; + clock-names = "ref_clk", "pclk"; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + spi1: spi@40a0000 { + compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6"; + reg = <0x0 0x040a0000 0x0 0x10000>; + clocks = <&scmi_clk CLK_TREE_FCH_SPI1_APB>, + <&scmi_clk CLK_TREE_FCH_SPI1_APB>; + clock-names = "ref_clk", "pclk"; + interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + uart0: serial@40b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x040b0000 0x0 0x1000>; @@ -328,6 +348,11 @@ status = "disabled"; }; + iomuxc: pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x0 0x04170000 0x0 0x1000>; + }; + mbox_ap2se: mailbox@5060000 { compatible = "cix,sky1-mbox"; reg = <0x0 0x05060000 0x0 0x10000>; @@ -388,6 +413,132 @@ cix,mbox-dir = "tx"; }; + pcie_x8_rc: pcie@a010000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a010000 0x00 0x10000>, + <0x00 0x2c000000 0x00 0x4000000>, + <0x00 0x0a000300 0x00 0x100>, + <0x00 0x0a000400 0x00 0x100>, + <0x00 0x60000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x60100000 0x0 0x60100000 0x0 0x00100000>, + <0x02000000 0x0 0x60200000 0x0 0x60200000 0x0 0x1fe00000>, + <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0xc0 0xff>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0xc000 &gic_its 0xc000 0x4000>; + status = "disabled"; + }; + + pcie_x4_rc: pcie@a070000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a070000 0x00 0x10000>, + <0x00 0x29000000 0x00 0x3000000>, + <0x00 0x0a060300 0x00 0x40>, + <0x00 0x0a060400 0x00 0x40>, + <0x00 0x50000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x00 0x50100000 0x00 0x50100000 0x00 0x00100000>, + <0x02000000 0x00 0x50200000 0x00 0x50200000 0x00 0x0fe00000>, + <0x43000000 0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x90 0xbf>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x9000 &gic_its 0x9000 0x3000>; + status = "disabled"; + }; + + pcie_x2_rc: pcie@a0c0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0c0000 0x00 0x10000>, + <0x00 0x26000000 0x00 0x3000000>, + <0x00 0x0a0600340 0x00 0x20>, + <0x00 0x0a0600440 0x00 0x20>, + <0x00 0x40000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x40100000 0x0 0x40100000 0x0 0x00100000>, + <0x02000000 0x0 0x40200000 0x0 0x40200000 0x0 0x0fe00000>, + <0x43000000 0x10 0x00000000 0x10 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x60 0x8f>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x6000 &gic_its 0x6000 0x3000>; + status = "disabled"; + }; + + pcie_x1_0_rc: pcie@a0d0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0d0000 0x00 0x10000>, + <0x00 0x20000000 0x00 0x3000000>, + <0x00 0x0a060360 0x00 0x20>, + <0x00 0x0a060460 0x00 0x20>, + <0x00 0x30000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>, + <0x02000000 0x0 0x30200000 0x0 0x30200000 0x0 0x07e00000>, + <0x43000000 0x08 0x00000000 0x08 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0x2f>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x0000 &gic_its 0x0000 0x3000>; + status = "disabled"; + }; + + pcie_x1_1_rc: pcie@a0e0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0e0000 0x00 0x10000>, + <0x00 0x23000000 0x00 0x3000000>, + <0x00 0x0a060380 0x00 0x20>, + <0x00 0x0a060480 0x00 0x20>, + <0x00 0x38000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, + <0x02000000 0x0 0x38200000 0x0 0x38200000 0x0 0x07e00000>, + <0x43000000 0x0C 0x00000000 0x0C 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x30 0x5f>; + device_type = "pci"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x3000 &gic_its 0x3000 0x3000>; + status = "disabled"; + }; + gic: interrupt-controller@e010000 { compatible = "arm,gic-v3"; reg = <0x0 0x0e010000 0 0x10000>, /* GICD */ @@ -416,6 +567,11 @@ }; }; }; + + iomuxc_s5: pinctrl@16007000 { + compatible = "cix,sky1-pinctrl-s5"; + reg = <0x0 0x16007000 0x0 0x1000>; + }; }; timer { diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts index eb7b48593187..6f40ca4350ed 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts @@ -27,20 +27,7 @@ }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (540 * 960 * 4)>; - width = <540>; - height = <960>; - stride = <(540 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-keys { @@ -110,8 +97,9 @@ pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (540 * 960 * 4)>; + iommu-addresses = <&decon 0x67000000 (540 * 960 * 4)>; no-map; }; }; @@ -124,6 +112,47 @@ }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <836000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "syna,td4101-panel"; + reg = <0>; + + backlight-gpios = <&gpd3 7 GPIO_ACTIVE_LOW>; + + width-mm = <62>; + height-mm = <110>; + + panel-timing { + clock-frequency = <69336720>; + + hactive = <540>; + hsync-len = <4>; + hfront-porch = <364>; + hback-porch = <40>; + + vactive = <960>; + vsync-len = <2>; + vfront-porch = <244>; + vback-porch = <13>; + }; + }; +}; + &gpu { status = "okay"; }; @@ -447,6 +476,7 @@ vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts index b8ce433b93b1..09f2367cfec9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts @@ -27,20 +27,7 @@ }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (720 * 1480 * 4)>; - width = <720>; - height = <1480>; - stride = <(720 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-hall-effect-sensor { @@ -119,8 +106,9 @@ pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (720 * 1480 * 4)>; + iommu-addresses = <&decon 0x67000000 (720 * 1480 * 4)>; no-map; }; }; @@ -133,6 +121,28 @@ }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa5x01-ams561ra01"; + reg = <0>; + }; +}; + &gpu { status = "okay"; }; @@ -430,6 +440,7 @@ vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts index b1d9eff5a827..29e124c72e9d 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts @@ -27,20 +27,7 @@ }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (1080 * 1920 * 4)>; - width = <1080>; - height = <1920>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-keys { @@ -108,8 +95,9 @@ pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (1080 * 1920 * 4)>; + iommu-addresses = <&decon 0x67000000 (1080 * 1920 * 4)>; no-map; }; }; @@ -122,6 +110,47 @@ }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <1001000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; +}; + &gpu { status = "okay"; }; @@ -463,6 +492,7 @@ vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi index d5d347623b90..2827e10d6962 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi @@ -178,6 +178,14 @@ "samsung,exynos7-pmu", "syscon"; reg = <0x10480000 0x10000>; + mipi_phy: mipi-phy { + compatible = "samsung,exynos7870-mipi-video-phy"; + #phy-cells = <1>; + + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,disp-sysreg = <&syscon_disp>; + }; + reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x080c>; @@ -675,6 +683,77 @@ <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>; }; + syscon_cam0: system-controller@144f1040 { + compatible = "samsung,exynos7870-cam0-sysreg", "syscon"; + reg = <0x144f1040 0x04>; + }; + + dsi: dsi@14800000 { + compatible = "samsung,exynos7870-mipi-dsi"; + reg = <0x14800000 0x100>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_BUS_DISP>, + <&cmu_dispaud CLK_GOUT_DISPAUD_APB_DISP>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_TXBYTECLKHS_USER>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_RXCLKESC0_USER>; + clock-names = "bus", "pll", "byte", "esc"; + + phys = <&mipi_phy 1>; + phy-names = "dsim"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_decon: endpoint { + remote-endpoint = <&decon_to_dsi>; + }; + }; + }; + }; + + decon: display-controller@14830000 { + compatible = "samsung,exynos7870-decon"; + reg = <0x14830000 0x8000>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_PLL>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_ECLK>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_VCLK>; + clock-names = "pclk_decon0", "aclk_decon0", + "decon0_eclk", "decon0_vclk"; + + iommus = <&sysmmu_decon>; + + status = "disabled"; + + port { + decon_to_dsi: endpoint { + remote-endpoint = <&dsi_to_decon>; + }; + }; + }; + + sysmmu_decon: iommu@14860000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14860000 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <0>; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>; + clock-names = "sysmmu"; + }; + pinctrl_dispaud: pinctrl@148c0000 { compatible = "samsung,exynos7870-pinctrl"; reg = <0x148c0000 0x1000>; @@ -692,6 +771,11 @@ <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>, <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>; }; + + syscon_disp: system-controller@148f100c { + compatible = "samsung,exynos7870-disp-sysreg", "syscon"; + reg = <0x148f100c 0x04>; + }; }; timer { diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi index 7179109c49d0..f8e2a31b4b75 100644 --- a/arch/arm64/boot/dts/exynos/exynos990.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi @@ -260,6 +260,12 @@ clock-names = "oscclk", "bus", "ip"; }; + sysreg_peric0: syscon@10420000 { + compatible = "samsung,exynos990-peric0-sysreg", "syscon"; + reg = <0x10420000 0x10000>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PCLK>; + }; + pinctrl_peric0: pinctrl@10430000 { compatible = "samsung,exynos990-pinctrl"; reg = <0x10430000 0x1000>; @@ -277,6 +283,12 @@ clock-names = "oscclk", "bus", "ip"; }; + sysreg_peric1: syscon@10720000 { + compatible = "samsung,exynos990-peric1-sysreg", "syscon"; + reg = <0x10720000 0x10000>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PCLK>; + }; + pinctrl_peric1: pinctrl@10730000 { compatible = "samsung,exynos990-pinctrl"; reg = <0x10730000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 0fdf2062930a..6ee74d260776 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -1449,11 +1449,37 @@ status = "disabled"; }; + cmu_mfc: clock-controller@19c00000 { + compatible = "samsung,exynosautov920-cmu-mfc"; + reg = <0x19c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_MFC_MFC>, + <&cmu_top DOUT_CLKCMU_MFC_WFD>; + clock-names = "oscclk", + "mfc", + "wfd"; + }; + pinctrl_aud: pinctrl@1a460000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x1a460000 0x10000>; }; + cmu_m2m: clock-controller@1a800000 { + compatible = "samsung,exynosautov920-cmu-m2m"; + reg = <0x1a800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_M2M_NOC>, + <&cmu_top DOUT_CLKCMU_M2M_JPEG>; + clock-names = "oscclk", + "noc", + "jpeg"; + }; + cmu_cpucl0: clock-controller@1ec00000 { compatible = "samsung,exynosautov920-cmu-cpucl0"; reg = <0x1ec00000 0x8000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index 84ff3e047d3b..93892adaa679 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -109,6 +109,13 @@ system-power-controller; wakeup-source; + clocks { + compatible = "samsung,s2mpg10-clk"; + #clock-cells = <1>; + clock-output-names = "rtc32k_ap", "peri32k1", + "peri32k2"; + }; + regulators { }; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 31c99526470d..d06d1d05f364 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/clock/google,gs101.h> +#include <dt-bindings/clock/google,gs101-acpm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/samsung,exynos-usi.h> @@ -72,80 +73,96 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0000>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu1: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0100>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu2: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0200>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu3: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0300>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu4: cpu@400 { device_type = "cpu"; compatible = "arm,cortex-a76"; reg = <0x0400>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>; enable-method = "psci"; cpu-idle-states = <&enyo_cpu_sleep>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; + operating-points-v2 = <&cpucl1_opp_table>; }; cpu5: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a76"; reg = <0x0500>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>; enable-method = "psci"; cpu-idle-states = <&enyo_cpu_sleep>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; + operating-points-v2 = <&cpucl1_opp_table>; }; cpu6: cpu@600 { device_type = "cpu"; compatible = "arm,cortex-x1"; reg = <0x0600>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>; enable-method = "psci"; cpu-idle-states = <&hera_cpu_sleep>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; + operating-points-v2 = <&cpucl2_opp_table>; }; cpu7: cpu@700 { device_type = "cpu"; compatible = "arm,cortex-x1"; reg = <0x0700>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>; enable-method = "psci"; cpu-idle-states = <&hera_cpu_sleep>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; + operating-points-v2 = <&cpucl2_opp_table>; }; idle-states { @@ -183,6 +200,273 @@ }; }; + cpucl0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <537500>; + clock-latency-ns = <500000>; + }; + + opp-574000000 { + opp-hz = /bits/ 64 <574000000>; + opp-microvolt = <600000>; + clock-latency-ns = <500000>; + }; + + opp-738000000 { + opp-hz = /bits/ 64 <738000000>; + opp-microvolt = <618750>; + clock-latency-ns = <500000>; + }; + + opp-930000000 { + opp-hz = /bits/ 64 <930000000>; + opp-microvolt = <668750>; + clock-latency-ns = <500000>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + opp-microvolt = <712500>; + clock-latency-ns = <500000>; + }; + + opp-1197000000 { + opp-hz = /bits/ 64 <1197000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1328000000 { + opp-hz = /bits/ 64 <1328000000>; + opp-microvolt = <762500>; + clock-latency-ns = <500000>; + }; + + opp-1401000000 { + opp-hz = /bits/ 64 <1401000000>; + opp-microvolt = <781250>; + clock-latency-ns = <500000>; + }; + + opp-1598000000 { + opp-hz = /bits/ 64 <1598000000>; + opp-microvolt = <831250>; + clock-latency-ns = <500000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <862500>; + clock-latency-ns = <500000>; + }; + + opp-1803000000 { + opp-hz = /bits/ 64 <1803000000>; + opp-microvolt = <906250>; + clock-latency-ns = <500000>; + }; + }; + + cpucl1_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <506250>; + clock-latency-ns = <500000>; + }; + + opp-553000000 { + opp-hz = /bits/ 64 <553000000>; + opp-microvolt = <537500>; + clock-latency-ns = <500000>; + }; + + opp-696000000 { + opp-hz = /bits/ 64 <696000000>; + opp-microvolt = <562500>; + clock-latency-ns = <500000>; + }; + + opp-799000000 { + opp-hz = /bits/ 64 <799000000>; + opp-microvolt = <581250>; + clock-latency-ns = <500000>; + }; + + opp-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <606250>; + clock-latency-ns = <500000>; + }; + + opp-1024000000 { + opp-hz = /bits/ 64 <1024000000>; + opp-microvolt = <625000>; + clock-latency-ns = <500000>; + }; + + opp-1197000000 { + opp-hz = /bits/ 64 <1197000000>; + opp-microvolt = <662500>; + clock-latency-ns = <500000>; + }; + + opp-1328000000 { + opp-hz = /bits/ 64 <1328000000>; + opp-microvolt = <687500>; + clock-latency-ns = <500000>; + }; + + opp-1491000000 { + opp-hz = /bits/ 64 <1491000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1663000000 { + opp-hz = /bits/ 64 <1663000000>; + opp-microvolt = <775000>; + clock-latency-ns = <500000>; + }; + + opp-1836000000 { + opp-hz = /bits/ 64 <1836000000>; + opp-microvolt = <818750>; + clock-latency-ns = <500000>; + }; + + opp-1999000000 { + opp-hz = /bits/ 64 <1999000000>; + opp-microvolt = <868750>; + clock-latency-ns = <500000>; + }; + + opp-2130000000 { + opp-hz = /bits/ 64 <2130000000>; + opp-microvolt = <918750>; + clock-latency-ns = <500000>; + }; + + opp-2253000000 { + opp-hz = /bits/ 64 <2253000000>; + opp-microvolt = <968750>; + clock-latency-ns = <500000>; + }; + }; + + cpucl2_opp_table: opp-table-2 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <500000>; + clock-latency-ns = <500000>; + }; + + opp-851000000 { + opp-hz = /bits/ 64 <851000000>; + opp-microvolt = <556250>; + clock-latency-ns = <500000>; + }; + + opp-984000000 { + opp-hz = /bits/ 64 <984000000>; + opp-microvolt = <575000>; + clock-latency-ns = <500000>; + }; + + opp-1106000000 { + opp-hz = /bits/ 64 <1106000000>; + opp-microvolt = <606250>; + clock-latency-ns = <500000>; + }; + + opp-1277000000 { + opp-hz = /bits/ 64 <1277000000>; + opp-microvolt = <631250>; + clock-latency-ns = <500000>; + }; + + opp-1426000000 { + opp-hz = /bits/ 64 <1426000000>; + opp-microvolt = <662500>; + clock-latency-ns = <500000>; + }; + + opp-1582000000 { + opp-hz = /bits/ 64 <1582000000>; + opp-microvolt = <693750>; + clock-latency-ns = <500000>; + }; + + opp-1745000000 { + opp-hz = /bits/ 64 <1745000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1826000000 { + opp-hz = /bits/ 64 <1826000000>; + opp-microvolt = <750000>; + clock-latency-ns = <500000>; + }; + + opp-2048000000 { + opp-hz = /bits/ 64 <2048000000>; + opp-microvolt = <793750>; + clock-latency-ns = <500000>; + }; + + opp-2188000000 { + opp-hz = /bits/ 64 <2188000000>; + opp-microvolt = <831250>; + clock-latency-ns = <500000>; + }; + + opp-2252000000 { + opp-hz = /bits/ 64 <2252000000>; + opp-microvolt = <850000>; + clock-latency-ns = <500000>; + }; + + opp-2401000000 { + opp-hz = /bits/ 64 <2401000000>; + opp-microvolt = <887500>; + clock-latency-ns = <500000>; + }; + + opp-2507000000 { + opp-hz = /bits/ 64 <2507000000>; + opp-microvolt = <925000>; + clock-latency-ns = <500000>; + }; + + opp-2630000000 { + opp-hz = /bits/ 64 <2630000000>; + opp-microvolt = <968750>; + clock-latency-ns = <500000>; + }; + + opp-2704000000 { + opp-hz = /bits/ 64 <2704000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + + opp-2802000000 { + opp-hz = /bits/ 64 <2802000000>; + opp-microvolt = <1056250>; + clock-latency-ns = <500000>; + }; + }; + /* ect node is required to be present by bootloader */ ect { }; @@ -202,6 +486,7 @@ firmware { acpm_ipc: power-management { compatible = "google,gs101-acpm-ipc"; + #clock-cells = <1>; mboxes = <&ap2apm_mailbox>; shmem = <&apm_sram>; }; @@ -288,13 +573,19 @@ cmu_misc: clock-controller@10010000 { compatible = "google,gs101-cmu-misc"; - reg = <0x10010000 0x8000>; + reg = <0x10010000 0x10000>; #clock-cells = <1>; clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>, <&cmu_top CLK_DOUT_CMU_MISC_SSS>; clock-names = "bus", "sss"; }; + sysreg_misc: syscon@10030000 { + compatible = "google,gs101-misc-sysreg", "syscon"; + reg = <0x10030000 0x10000>; + clocks = <&cmu_misc CLK_GOUT_MISC_SYSREG_MISC_PCLK>; + }; + timer@10050000 { compatible = "google,gs101-mct", "samsung,exynos4210-mct"; @@ -365,7 +656,7 @@ cmu_peric0: clock-controller@10800000 { compatible = "google,gs101-cmu-peric0"; - reg = <0x10800000 0x4000>; + reg = <0x10800000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, @@ -911,7 +1202,7 @@ cmu_peric1: clock-controller@10c00000 { compatible = "google,gs101-cmu-peric1"; - reg = <0x10c00000 0x4000>; + reg = <0x10c00000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>, @@ -1265,7 +1556,7 @@ cmu_hsi0: clock-controller@11000000 { compatible = "google,gs101-cmu-hsi0"; - reg = <0x11000000 0x4000>; + reg = <0x11000000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, @@ -1277,6 +1568,12 @@ "usbdpdbg"; }; + sysreg_hsi0: syscon@11020000 { + compatible = "google,gs101-hsi0-sysreg", "syscon"; + reg = <0x11020000 0x10000>; + clocks = <&cmu_hsi0 CLK_GOUT_HSI0_SYSREG_HSI0_PCLK>; + }; + usbdrd31_phy: phy@11100000 { compatible = "google,gs101-usb31drd-phy"; reg = <0x11100000 0x0200>, @@ -1332,7 +1629,7 @@ cmu_hsi2: clock-controller@14400000 { compatible = "google,gs101-cmu-hsi2"; - reg = <0x14400000 0x4000>; + reg = <0x14400000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, @@ -1395,16 +1692,16 @@ cmu_apm: clock-controller@17400000 { compatible = "google,gs101-cmu-apm"; - reg = <0x17400000 0x8000>; + reg = <0x17400000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>; clock-names = "oscclk"; }; - sysreg_apm: syscon@174204e0 { + sysreg_apm: syscon@17420000 { compatible = "google,gs101-apm-sysreg", "syscon"; - reg = <0x174204e0 0x1000>; + reg = <0x17420000 0x10000>; }; pmu_system_controller: system-controller@17460000 { @@ -1497,7 +1794,7 @@ cmu_top: clock-controller@1e080000 { compatible = "google,gs101-cmu-top"; - reg = <0x1e080000 0x8000>; + reg = <0x1e080000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 525ef180481d..f30d3fd724d0 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -136,12 +136,18 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10.dtbo +imx8mm-phyboard-polis-peb-av-10-etml1010g3dra-dtbs += imx8mm-phyboard-polis-rdk.dtb \ + imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtbo +imx8mm-phyboard-polis-peb-av-10-ph128800t006-dtbs += imx8mm-phyboard-polis-rdk.dtb \ + imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtbo imx8mm-phyboard-polis-peb-eval-01-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-eval-01.dtbo imx8mm-phycore-no-eth-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-eth.dtbo imx8mm-phycore-no-spiflash-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-spiflash.dtbo imx8mm-phycore-rpmsg-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-rpmsg.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-eval-01.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-eth.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-spiflash.dtb @@ -226,14 +232,32 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-etml1010g3dra.dtbo +imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10.dtbo +imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo +imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo +imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-ph128800t006.dtbo imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-prt8ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb @@ -344,6 +368,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb @@ -356,11 +381,15 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb +imx93-phyboard-nash-jtag-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-jtag.dtbo imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo +imx93-phyboard-nash-pwm-fan-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-pwm-fan.dtbo imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-jtag.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-pwm-fan.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb @@ -373,6 +402,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo @@ -382,6 +412,8 @@ imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-verdin-evk.dtb + imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo imx8mm-kontron-bl-lte-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index fc3e138077b8..ef80bf6a604f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -493,10 +493,11 @@ }; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1012a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7d172d7e5737..e7f9c9319319 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -613,9 +613,11 @@ }; usb0: usb@3100000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu 1>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -623,9 +625,11 @@ }; usb1: usb@3110000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu 2>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 73315c517039..50d9b03a284a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -833,10 +833,11 @@ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; @@ -845,10 +846,11 @@ }; usb1: usb@3000000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; @@ -857,10 +859,11 @@ }; usb2: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 736722b58e77..48a6c08fcea8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -42,6 +42,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&stat_pres2 6 GPIO_ACTIVE_LOW>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&stat_pres2 7 GPIO_ACTIVE_LOW>; + }; + }; &dspi { @@ -139,6 +154,31 @@ reg = <0x4c>; }; }; + + i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@76 { + compatible = "nxp,pca9547"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + + sfp1_i2c: i2c@6 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp2_i2c: i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; }; @@ -166,8 +206,20 @@ fpga: board-control@2,0 { compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x2 0x0 0x0000100>; ranges = <0 2 0 0x100>; + + stat_pres2: gpio@c { + compatible = "fsl,ls1046aqds-fpga-gpio-stat-pres2"; + reg = <0xc 1>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SLOT1", "SLOT2", "SLOT3", "SLOT4", "SLOT5", "SLOT6", + "SFP1_MOD_DEF", "SFP2_MOD_DEF"; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 770d91ef0310..22173d69713d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -749,10 +749,11 @@ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -760,10 +761,11 @@ }; usb1: usb@3000000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -771,10 +773,11 @@ }; usb2: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index 3a11068f2212..71765ec91745 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -253,6 +253,10 @@ reg = <0x2d>; }; + uc: board-controller@7e { + compatible = "traverse,ten64-controller"; + reg = <0x7e>; + }; }; &i2c2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 9d5726378aa0..b2f6cd237be0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -489,10 +489,12 @@ }; usb0: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + iommus = <&smmu 1>; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -500,10 +502,12 @@ }; usb1: usb@3110000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + iommus = <&smmu 2>; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 2d01e20b47e7..d8ef68ad3bcc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2160AQDS"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 0c44b3cbef77..935f421475ac 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2160ARDB"; @@ -31,6 +31,28 @@ regulator-boot-on; regulator-always-on; }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + maximum-power-milliwatt = <2000>; + /* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */ + /* tx-disable-gpios = <&sfp2_csr 0 GPIO_ACTIVE_HIGH>; */ + los-gpios = <&sfp2_csr 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp2_csr 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp2_csr 7 GPIO_ACTIVE_LOW>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp3_i2c>; + maximum-power-milliwatt = <2000>; + /* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */ + /* tx-disable-gpios = <&sfp3_csr 0 GPIO_ACTIVE_HIGH>; */ + los-gpios = <&sfp3_csr 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp3_csr 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp3_csr 7 GPIO_ACTIVE_LOW>; + }; }; &crypto { @@ -170,6 +192,37 @@ &i2c0 { status = "okay"; + cpld@66 { + compatible = "fsl,lx2160ardb-fpga"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + + sfp2_csr: gpio@19 { + compatible = "fsl,lx2160ardb-fpga-gpio-sfp"; + reg = <0x19>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SFP2_TX_EN", "", + "", "", + "SFP2_RX_LOS", "SFP2_TX_FAULT", + "", "SFP2_MOD_ABS"; + }; + + sfp3_csr: gpio@1a { + compatible = "fsl,lx2160ardb-fpga-gpio-sfp"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SFP3_TX_EN", "", + "", "", + "SFP3_RX_LOS", "SFP3_TX_FAULT", + "", "SFP3_MOD_ABS"; + }; + }; + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; @@ -205,6 +258,31 @@ vcc-supply = <&sb_3v3>; }; }; + + i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + sfp2_i2c: i2c@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp3_i2c: i2c@5 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c9541403bcd8..d899c0355e51 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1094,24 +1094,28 @@ }; usb0: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; usb3-lpm-capable; + iommus = <&smmu 1>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; usb1: usb@3110000 { - compatible = "snps,dwc3"; + compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; usb3-lpm-capable; + iommus = <&smmu 2>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts index 9f5ff1ffe7d5..7a595fddc027 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2162AQDS"; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi index 311d4950793c..06790255a764 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi @@ -109,7 +109,10 @@ status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi index 3d8731504ce1..7022de46b8bf 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi @@ -196,7 +196,10 @@ status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi index 106e802a68ba..12732ed7f811 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -245,7 +245,10 @@ status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi index 86d018f470c1..9153dddfd3b8 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -18,7 +18,7 @@ brightness-levels = <0 45 63 88 119 158 203 255>; default-brightness-level = <4>; enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */ - /* TODO: hook-up to Apalis BKL1_PWM */ + pwms = <&pwm_lvds1 0 6666667 PWM_POLARITY_INVERTED>; status = "disabled"; }; @@ -31,12 +31,6 @@ 3000 1>; }; - /* TODO: LVDS Panel */ - - /* TODO: Shared PCIe/SATA Reference Clock */ - - /* TODO: PCIe Wi-Fi Reference Clock */ - /* * Power management bus used to control LDO1OUT of the * second PMIC PF8100. This is used for controlling voltage levels of @@ -83,8 +77,8 @@ gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - regulator-name = "wifi_pwrdn_fake_regulator"; - regulator-settling-time-us = <100>; + regulator-name = "Wi-Fi_POWER_DOWN"; /* Wi-Fi module PDn */ + startup-delay-us = <100>; }; reg_pcie_switch: regulator-pcie-switch { @@ -232,6 +226,34 @@ spdif-out; }; + thermal-zones { + pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + cooling-maps { + cooling_maps_map0: map0 { + trip = <&pmic_alert0>; + }; + }; + + trips { + pmic_alert0: trip0 { + hysteresis = <2000>; + temperature = <110000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + hysteresis = <2000>; + temperature = <125000>; + type = "critical"; + }; + }; + }; + }; + touchscreen: touchscreen { compatible = "toradex,vf50-touchscreen"; interrupt-parent = <&lsio_gpio3>; @@ -262,15 +284,15 @@ &adc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_vref_1v8>; }; &adc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_vref_1v8>; }; -/* TODO: Asynchronous Sample Rate Converter (ASRC) */ - &cpu_alert0 { temperature = <95000>; }; @@ -799,7 +821,10 @@ <&hsio_refa_clk>, <&hsio_per_clk>; }; -/* TODO: Apalis BKL1_PWM */ +&pwm_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_bkl>; +}; /* Apalis DAP1 */ &sai1 { @@ -841,8 +866,6 @@ status = "okay"; }; -/* TODO: Thermal Zones */ - /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ /* Apalis USBH4 */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index c32a6947ae9c..5e4233ccfde4 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -296,7 +296,8 @@ audio_subsys: bus@59000000 { <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */ - <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */ + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, /* 23 unused */ + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, @@ -558,7 +559,8 @@ audio_subsys: bus@59000000 { <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */ + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* sai5 */ + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_1_CH0>, <&pd IMX_SC_R_DMA_1_CH1>, <&pd IMX_SC_R_DMA_1_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index ce6ef160fd55..176e2e332f87 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -77,7 +77,11 @@ conn_subsys: bus@5b000000 { <&sdhc0_lpcg IMX_LPCG_CLK_5>, <&sdhc0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <400000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -88,6 +92,8 @@ conn_subsys: bus@5b000000 { <&sdhc1_lpcg IMX_LPCG_CLK_5>, <&sdhc1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -101,7 +107,11 @@ conn_subsys: bus@5b000000 { <&sdhc2_lpcg IMX_LPCG_CLK_5>, <&sdhc2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -114,8 +124,9 @@ conn_subsys: bus@5b000000 { clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, <&enet0_lpcg IMX_LPCG_CLK_2>, <&enet0_lpcg IMX_LPCG_CLK_3>, - <&enet0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + <&enet0_lpcg IMX_LPCG_CLK_0>, + <&enet0_lpcg IMX_LPCG_CLK_1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; @@ -134,8 +145,9 @@ conn_subsys: bus@5b000000 { clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, <&enet1_lpcg IMX_LPCG_CLK_2>, <&enet1_lpcg IMX_LPCG_CLK_3>, - <&enet1_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + <&enet1_lpcg IMX_LPCG_CLK_0>, + <&enet0_lpcg IMX_LPCG_CLK_1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index 575be8115e42..4de78f870c05 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -182,7 +182,8 @@ dma_subsys: bus@5a000000 { <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_2_CH0>, <&pd IMX_SC_R_DMA_2_CH1>, <&pd IMX_SC_R_DMA_2_CH2>, @@ -466,7 +467,8 @@ dma_subsys: bus@5a000000 { <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_3_CH0>, <&pd IMX_SC_R_DMA_3_CH1>, <&pd IMX_SC_R_DMA_3_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi index 2cf0f7208350..a72b2f1c4a1b 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi @@ -67,7 +67,6 @@ img_subsys: bus@58000000 { power-domains = <&pd IMX_SC_R_CSI_0>; fsl,channel = <0>; fsl,num-irqs = <32>; - status = "disabled"; }; gpio0_mipi_csi0: gpio@58222000 { @@ -144,7 +143,6 @@ img_subsys: bus@58000000 { power-domains = <&pd IMX_SC_R_CSI_1>; fsl,channel = <0>; fsl,num-irqs = <32>; - status = "disabled"; }; gpio0_mipi_csi1: gpio@58242000 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 25a77cac6f0b..5c68d33e19f2 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -598,6 +598,10 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; }; &lsio_mu5 { @@ -649,6 +653,7 @@ pinctrl-names = "default"; reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; + vpcie3v3aux-supply = <®_pcieb>; status = "okay"; }; @@ -775,8 +780,10 @@ }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -785,12 +792,15 @@ }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; + max-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi index 72434529f78e..7a191195dbd9 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -101,7 +101,8 @@ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */ - <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */ + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, /* gpt3 */ + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, @@ -145,7 +146,8 @@ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; }; &edma3 { @@ -156,7 +158,8 @@ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; }; &flexcan1 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index a66ba6d0a8c0..74f9ce493248 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -7,6 +7,7 @@ /delete-node/ &fec2; /delete-node/ &usbotg3; /delete-node/ &usb3_phy; +/delete-node/ &usb3_lpcg; / { conn_enet0_root_clk: clock-conn-enet0-root { @@ -29,8 +30,8 @@ compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x5b050000 0x10000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq", "eth_wake_irq"; clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, <&eqos_lpcg IMX_LPCG_CLK_6>, diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi index ec466e4d7df5..5c0d09c5c086 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi @@ -54,3 +54,8 @@ interrupt-names = "dma"; }; }; + +&pcieb_ep { + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index ff7ca2075230..6eab8a6001db 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -542,6 +542,7 @@ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; vpcie-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso new file mode 100644 index 000000000000..193fa9dc34d4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" + +&backlight { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&bridge_out { + ti,lvds-vod-swing-clock-microvolt = <200000 600000>; + ti,lvds-vod-swing-data-microvolt = <200000 600000>; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sn65dsi83 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso new file mode 100644 index 000000000000..fd819bd563b8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" + +&backlight { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&bridge_out { + ti,lvds-vod-swing-clock-microvolt = <200000 600000>; + ti,lvds-vod-swing-data-microvolt = <200000 600000>; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sn65dsi83 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi new file mode 100644 index 000000000000..bd1f255e15ea --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx8mm-pinfunc.h" + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + power-supply = <®_vdd_3v3_s>; + status = "disabled"; + }; + + panel: panel { + backlight = <&backlight>; + power-supply = <®_vcc_3v3>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_Audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_Analog"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound-peb-av-10 { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-peb-av-10"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Speaker", "Speaker", + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + + simple-audio-card,cpu { + sound-dai = <&sai5>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MM_CLK_SAI5>; + }; + }; +}; + +&bridge_out { + remote-endpoint = <&panel_in>; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + codec: codec@18 { + compatible = "ti,tlv320aic3007"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tlv320>; + #sound-dai-cells = <0>; + reg = <0x18>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + ai3x-gpio-func = <0xd 0x0>; + ai3x-micbias-vg = <2>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + }; + + eeprom@57 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x57>; + vcc-supply = <®_vdd_3v3_s>; + }; + + eeprom@5f { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x5f>; + size = <32>; + vcc-supply = <®_vdd_3v3_s>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +&sai5 { + assigned-clocks = <&clk IMX8MM_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; + assigned-clock-rates = <11289600>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", + "pll11k"; + fsl,sai-mclk-direction-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e2 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e2 + >; + }; + pinctrl_lcd: lcd0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x12 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x12 + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 + MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 + >; + }; + + pinctrl_tlv320: tlv320grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x116 + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso index 79e4c3710ac3..28e8589f9f95 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso @@ -1,239 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2025 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ /dts-v1/; /plugin/; -#include <dt-bindings/clock/imx8mm-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx8mm-pinfunc.h" - -&{/} { - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - default-brightness-level = <6>; - pwms = <&pwm4 0 50000 0>; - power-supply = <®_vdd_3v3_s>; - enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - brightness-levels = <0 4 8 16 32 64 128 255>; - }; - - panel { - compatible = "edt,etml1010g3dra"; - backlight = <&backlight>; - power-supply = <®_vcc_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&bridge_out>; - }; - }; - }; - - reg_sound_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8_Audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_sound_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_Analog"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - sound-peb-av-10 { - compatible = "simple-audio-card"; - simple-audio-card,name = "snd-peb-av-10"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,mclk-fs = <32>; - simple-audio-card,widgets = - "Line", "Line In", - "Speaker", "Speaker", - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Speaker", "SPOP", - "Speaker", "SPOM", - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1L", "Line In", - "LINE1R", "Line In", - "MIC3R", "Microphone Jack", - "Microphone Jack", "Mic Bias"; - - simple-audio-card,cpu { - sound-dai = <&sai5>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clk IMX8MM_CLK_SAI5>; - }; - }; -}; - -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_gpio>; - sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - codec: codec@18 { - compatible = "ti,tlv320aic3007"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tlv320>; - #sound-dai-cells = <0>; - reg = <0x18>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; - ai3x-gpio-func = <0xd 0x0>; - ai3x-micbias-vg = <2>; - AVDD-supply = <®_sound_3v3>; - IOVDD-supply = <®_sound_3v3>; - DRVDD-supply = <®_sound_3v3>; - DVDD-supply = <®_sound_1v8>; - }; - - eeprom@57 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x57>; - vcc-supply = <®_vdd_3v3_s>; - }; - - eeprom@5f { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x5f>; - size = <32>; - vcc-supply = <®_vdd_3v3_s>; - }; -}; - -&lcdif { - status = "okay"; -}; - -&mipi_dsi { - samsung,esc-clock-frequency = <10000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&sai5 { - assigned-clocks = <&clk IMX8MM_CLK_SAI5>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; - assigned-clock-rates = <11289600>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>, - <&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>; - clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", - "pll11k"; - fsl,sai-mclk-direction-output; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai5>; - #sound-dai-cells = <0>; - status = "okay"; -}; - -&sn65dsi83 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - data-lanes = <1 2 3 4>; - }; - }; - - port@2 { - reg = <2>; - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - ti,lvds-vod-swing-clock-microvolt = <200000 600000>; - ti,lvds-vod-swing-data-microvolt = <200000 600000>; - }; - }; - }; -}; - -&iomuxc { - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2 - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2 - >; - }; - - pinctrl_i2c3_gpio: i2c3gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e2 - MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e2 - >; - }; - pinctrl_lcd: lcd0grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x12 - >; - }; - - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x12 - >; - }; - - pinctrl_sai5: sai5grp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 - MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 - MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 - MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 - MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 - >; - }; - - pinctrl_tlv320: tlv320grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x16 - MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 - >; - }; -}; +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso index a28f51ece93b..1059c26990fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2025 PHYTEC Messtechnik GmbH - * Author: Janine Hagemann <j.hagemann@phytec.de> */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index be470cfb03d7..6043e7d16306 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ /dts-v1/; @@ -285,6 +284,8 @@ over-current-active-low; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; + pinctrl-0 = <&pinctrl_usbotg1>; + pinctrl-names = "default"; srp-disable; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; @@ -458,6 +459,12 @@ >; }; + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x00 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi index 921a7f58fd41..3d66c6701342 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ #include "imx8mm.dtsi" @@ -288,6 +287,23 @@ reg = <0x2d>; vcc-supply = <®_vdd_1v8>; status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint {}; + }; + }; }; /* EEPROM */ @@ -305,6 +321,14 @@ }; }; +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; +}; + +&mipi_dsi_out { + remote-endpoint = <&bridge_in>; +}; + /* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts index 755cf9cacd22..2ecc8b3c67da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -452,7 +452,7 @@ pinctrl_usbotg1: usbotg1grp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x80 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x00 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 37db4f0dd505..dca213c85cc3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -115,6 +115,7 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; @@ -445,7 +446,7 @@ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x0 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 752caa38eb03..266038fbbef9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -351,17 +351,6 @@ >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index c09b40fc6dec..468c7e993c52 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -253,6 +253,7 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index a5f52f60169e..5aa0e2cd155e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -248,6 +248,7 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h new file mode 100644 index 000000000000..6481c484ca37 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright 2025 NXP + */ + +#ifndef __IMX8MP_AIPSTZ_H +#define __IMX8MP_AIPSTZ_H + +/* consumer type - master or peripheral */ +#define IMX8MP_AIPSTZ_MASTER 0x0 +#define IMX8MP_AIPSTZ_PERIPH 0x1 + +/* master configuration options */ +#define IMX8MP_AIPSTZ_MPL (1 << 0) +#define IMX8MP_AIPSTZ_MTW (1 << 1) +#define IMX8MP_AIPSTZ_MTR (1 << 2) +#define IMX8MP_AIPSTZ_MBW (1 << 3) + +/* peripheral configuration options */ +#define IMX8MP_AIPSTZ_TP (1 << 0) +#define IMX8MP_AIPSTZ_WP (1 << 1) +#define IMX8MP_AIPSTZ_SP (1 << 2) +#define IMX8MP_AIPSTZ_BW (1 << 3) + +/* master ID definitions */ +#define IMX8MP_AIPSTZ_EDMA 0 /* AUDIOMIX EDMA */ +#define IMX8MP_AIPSTZ_CA53 1 /* Cortex-A53 cluster */ +#define IMX8MP_AIPSTZ_SDMA2 3 /* AUDIOMIX SDMA2 */ +#define IMX8MP_AIPSTZ_SDMA3 3 /* AUDIOMIX SDMA3 */ +#define IMX8MP_AIPSTZ_HIFI4 5 /* HIFI4 DSP */ +#define IMX8MP_AIPSTZ_CM7 6 /* Cortex-M7 */ + +#endif /* __IMX8MP_AIPSTZ_H */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index af02af9e5334..9422beee30b2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -96,9 +96,9 @@ #address-cells = <1>; #size-cells = <0>; - ethphy0: ethernet-phy@0 { /* RTL8211E */ + ethphy0: ethernet-phy@1 { /* RTL8211E */ compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; + reg = <1>; reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; reset-assert-us = <20>; reset-deassert-us = <200000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts index d241db3743a9..04619a722906 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts @@ -22,6 +22,18 @@ stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -222,6 +234,28 @@ }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c4 { expander0: gpio@20 { compatible = "nxp,pca9535"; @@ -276,6 +310,10 @@ }; }; +&lcdif3 { + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -430,6 +468,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index ebdf13e97b4e..3d18c964a22c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -88,6 +88,7 @@ color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */ pinctrl-0 = <&pinctrl_dhcom_e>; pinctrl-names = "default"; @@ -97,6 +98,7 @@ color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ pinctrl-0 = <&pinctrl_dhcom_f>; pinctrl-names = "default"; @@ -106,6 +108,7 @@ color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */ pinctrl-0 = <&pinctrl_dhcom_h>; pinctrl-names = "default"; @@ -115,6 +118,7 @@ color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ pinctrl-0 = <&pinctrl_dhcom_i>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3730792daf50..c6facb2ad9aa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -442,6 +442,10 @@ status = "disabled";/* can2 pin conflict with pdm */ }; +&hdmi_pai { + status = "okay"; +}; + &hdmi_pvi { status = "okay"; }; @@ -710,6 +714,8 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; + vpcie3v3aux-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts index 614b4ce330b1..0924ac50fd2d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts @@ -16,11 +16,20 @@ ethernet1 = &eqos; }; - extcon_usbc: usbc { - compatible = "linux,extcon-usb-gpio"; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + label = "Type-C"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_id>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + type = "micro"; + vbus-supply = <®_usb1_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; }; leds { @@ -244,9 +253,15 @@ hnp-disable; srp-disable; dr_mode = "otg"; - extcon = <&extcon_usbc>; usb-role-switch; + role-switch-default-mode = "peripheral"; status = "okay"; + + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; }; &usb_dwc3_1 { @@ -273,7 +288,6 @@ }; &usb3_phy0 { - vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso new file mode 100644 index 000000000000..7a7f27d6bb1b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx8mp-clock.h> + +/dts-v1/; +/plugin/; + +&backlight_lvds1 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + pwms = <&pwm3 0 50000 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; +}; + +&panel_lvds1 { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso new file mode 100644 index 000000000000..aceb5b6056ef --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx8mp-clock.h> +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" + +&backlight_lvds0 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <2>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; +}; + +&panel_lvds0 { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso new file mode 100644 index 000000000000..559286f384be --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx8mp-clock.h> +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" + +&backlight_lvds0 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <2>; + pwms = <&pwm4 0 66667 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 66.5 MHz. + */ + assigned-clock-rates = <0>, <465500000>; + status = "okay"; +}; + +&panel_lvds0 { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi new file mode 100644 index 000000000000..bb740f845855 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx8mp-pinfunc.h" + +&{/} { + backlight_lvds0: backlight0 { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_lvds0>; + pinctrl-names = "default"; + power-supply = <®_vcc_12v>; + status = "disabled"; + }; + + panel_lvds0: panel-lvds0 { + backlight = <&backlight_lvds0>; + power-supply = <®_vcc_3v3_sw>; + status = "disabled"; + + port { + panel0_in: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; + + reg_vcc_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "VCC_12V"; + }; + + reg_vcc_1v8_audio: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VCC_1V8_Audio"; + }; + + reg_vcc_3v3_analog: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3_Analog"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-peb-av-10"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Speaker", "Speaker", + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MP_CLK_SAI2>; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + codec: codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + pinctrl-0 = <&pinctrl_tlv320>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + ai3x-gpio-func = <0xd 0x0>; + ai3x-micbias-vg = <2>; + AVDD-supply = <®_vcc_3v3_analog>; + DRVDD-supply = <®_vcc_3v3_analog>; + DVDD-supply = <®_vcc_1v8_audio>; + IOVDD-supply = <®_vcc_3v3_sw>; + }; + + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc_3v3_sw>; + }; +}; + +&ldb_lvds_ch0 { + remote-endpoint = <&panel0_in>; +}; + +&pwm4 { + pinctrl-0 = <&pinctrl_pwm4>; + pinctrl-names = "default"; +}; + +&sai2 { + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-names = "default"; + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, + <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_AUDIO_PLL1_OUT>, + <&clk IMX8MP_AUDIO_PLL2_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", + "pll11k"; + #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; + fsl,sai-synchronous-rx; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x1e2 + MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x1e2 + >; + }; + + pinctrl_lvds0: lvds0grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x12 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x12 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 + MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + >; + }; + + pinctrl_tlv320: tlv320grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x16 + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x16 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso new file mode 100644 index 000000000000..95078618ee09 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso new file mode 100644 index 000000000000..a39f83bf8204 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx8mp-clock.h> + +/dts-v1/; +/plugin/; + +&backlight_lvds1 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + pwms = <&pwm3 0 66667 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 66.5 MHz. + */ + assigned-clock-rates = <0>, <465500000>; + status = "okay"; +}; + + +&panel_lvds1 { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 436152308642..9687b4ded8f4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -1,14 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ /dts-v1/; #include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/leds/leds-pca9532.h> -#include <dt-bindings/pwm/pwm.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mp-phycore-som.dtsi" @@ -21,16 +19,12 @@ stdout-path = &uart1; }; - backlight_lvds: backlight { + backlight_lvds1: backlight1 { compatible = "pwm-backlight"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds1>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <11>; - enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; - num-interpolated-steps = <2>; + pinctrl-names = "default"; power-supply = <®_lvds1_reg_en>; - pwms = <&pwm3 0 50000 0>; + status = "disabled"; }; fan0: fan { @@ -43,10 +37,11 @@ #cooling-cells = <2>; }; - panel1_lvds: panel-lvds { - compatible = "edt,etml1010g3dra"; - backlight = <&backlight_lvds>; + panel_lvds1: panel-lvds1 { + /* compatible panel in overlay */ + backlight = <&backlight_lvds1>; power-supply = <®_vcc_3v3_sw>; + status = "disabled"; port { panel1_in: endpoint { @@ -232,32 +227,8 @@ }; }; -&lcdif2 { - status = "okay"; -}; - -&lvds_bridge { - status = "okay"; - - ports { - port@2 { - ldb_lvds_ch1: endpoint { - remote-endpoint = <&panel1_in>; - }; - }; - }; -}; - -&media_blk_ctrl { - /* - * The LVDS panel on this device uses 72.4 MHz pixel clock, - * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB - * serializer and LCDIFv3 scanout engine can reach accurate - * pixel clock of exactly 72.4 MHz. - */ - assigned-clock-rates = <500000000>, <200000000>, - <0>, <0>, <500000000>, - <506800000>; +&ldb_lvds_ch1 { + remote-endpoint = <&panel1_in>; }; &snvs_pwrkey { @@ -282,9 +253,8 @@ }; &pwm3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; + pinctrl-names = "default"; }; &rv3028 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index 04f724c6ec21..88831c0fbb7b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> */ #include <dt-bindings/net/ti-dp83867.h> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts new file mode 100644 index 000000000000..30616218017b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mp.dtsi" + +/ { + model = "Protonic PRT8ML"; + compatible = "prt,prt8ml", "fsl,imx8mp"; + + chosen { + stdout-path = &uart4; + }; + + pcie_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie_refclk_oe: pcie0-refclk-oe { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_refclk>; + clocks = <&pcie_refclk>; + #clock-cells = <0>; + enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&A53_0 { + cpu-supply = <&fan53555>; +}; + +&A53_1 { + cpu-supply = <&fan53555>; +}; + +&A53_2 { + cpu-supply = <&fan53555>; +}; + +&A53_3 { + cpu-supply = <&fan53555>; +}; + +&a53_opp_table { + opp-1200000000 { + opp-microvolt = <900000>; + }; + + opp-1600000000 { + opp-microvolt = <980000>; + }; + + /* Power supply insuffient for 1.8 GHz */ + /delete-node/ opp-1800000000; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + + /* Disable DMA to meet performance requirements */ + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + reset-gpios = <&gpio_exp_1 4 GPIO_ACTIVE_LOW>; + spi-cpha; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + ethernet = <&fec>; + label = "cpu"; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + /* Unreliable at 1000Mbps, limit RGMII to 100Mbps */ + fixed-link { + full-duplex; + speed = <100>; + }; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; /* switch inserts delay */ + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + status = "okay"; + + fixed-link { + full-duplex; + speed = <100>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + rj45_phy: ethernet-phy@2 { + reg = <2>; + reset-gpios = <&gpio_exp_1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ak5558: codec@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio_exp_1 2 GPIO_ACTIVE_LOW>; + }; + + gpio_exp_1: gpio@25 { + compatible = "nxp,pca9571"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tps65987ddh_0: usb-pd@20 { + compatible = "ti,tps6598x"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65987ddh_0>; + interrupts-extended = <&gpio1 12 IRQ_TYPE_LEVEL_LOW>; + }; + + gpio_exp_2: gpio@25 { + compatible = "nxp,pca9571"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + + c0-hreset-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + line-name = "c0-hreset"; + output-low; + }; + + c1-hreset-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + line-name = "c1-hreset"; + output-low; + }; + }; + + fan53555: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan53555>; + regulator-name = "fan53555"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-always-on; + regulator-boot-on; + fcs,suspend-voltage-selector = <1>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ak4458: codec@11 { + compatible = "asahi-kasei,ak4458"; + reg = <0x11>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio_exp_2 5 GPIO_ACTIVE_LOW>; + }; + + tps65987ddh_1: usb-pd@20 { + compatible = "ti,tps6598x"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65987ddh_1>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&lcdif1 { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + no-1-8-v; + sd-uhs-sdr12; + sd-uhs-sdr25; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x154 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x154 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x154 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x154 + >; + }; + + pinctrl_fan53555: fan53555grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x114 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 + MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL 0x400000c3 + MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400000c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400000c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_pcie_refclk: pcierefclkgrp { + fsl,pins = < + MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0xc6 + >; + }; + + pinctrl_tps65987ddh_0: tps65987ddh-0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x1d0 + >; + }; + + pinctrl_tps65987ddh_1: tps65987ddh-1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x1d0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x040 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts new file mode 100644 index 000000000000..c263e8fd0484 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mp-skov-revb-hdmi.dts" + +/ { + model = "SKOV IMX8MP CPU revC - HDMI"; + compatible = "skov,imx8mp-skov-revc-hdmi", "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts new file mode 100644 index 000000000000..3e320d6dea3a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023"; + compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp"; + + panel { + compatible = "jutouch,jt101tm023"; + backlight = <&backlight>; + power-supply = <®_tft_vcom>; + + port { + in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + touchscreen@2a { + compatible = "eeti,exc81w32", "eeti,exc80h84"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + vdd-supply = <®_vdd_3v3>; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&in_lvds0>; + }; + }; + }; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4eedd00d83b9..59642a8a2c44 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -238,6 +238,13 @@ audio-asrc = <&easrc>; audio-cpu = <&sai3>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; thermal-zones { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index cbf0c9a740fa..de852ebff571 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -101,6 +101,7 @@ reg = <0x0>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; @@ -395,13 +396,6 @@ status = "okay"; }; -/* off-board header */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - /* console */ &uart2 { pinctrl-names = "default"; @@ -409,25 +403,6 @@ status = "okay"; }; -/* off-board header */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -/* off-board */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <4>; - non-removable; - status = "okay"; - bus-width = <4>; - non-removable; - status = "okay"; -}; - /* eMMC */ &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -464,7 +439,7 @@ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x0 >; }; @@ -523,13 +498,6 @@ >; }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 @@ -537,24 +505,6 @@ >; }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 - MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi index cf747ec6fa16..76020ef89bf3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -365,17 +365,6 @@ >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 12de7cf1e853..7662663ff5da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -228,6 +228,7 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a3de6604e29f..9b2b3a9bf9e8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include "imx8mp-aipstz.h" #include "imx8mp-pinfunc.h" / { @@ -80,6 +81,12 @@ operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu0_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_1: cpu@1 { @@ -98,6 +105,12 @@ operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu1_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_2: cpu@2 { @@ -116,6 +129,12 @@ operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu2_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_3: cpu@3 { @@ -134,6 +153,12 @@ operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu3_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_L2: l2-cache0 { @@ -323,7 +348,11 @@ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu0_therm 0 50>, + <&cpu1_therm 0 50>, + <&cpu2_therm 0 50>, + <&cpu3_therm 0 50>; }; }; }; @@ -356,7 +385,11 @@ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu0_therm 0 50>, + <&cpu1_therm 0 50>, + <&cpu2_therm 0 50>, + <&cpu3_therm 0 50>; }; }; }; @@ -1396,12 +1429,14 @@ }; }; - aips5: bus@30c00000 { - compatible = "fsl,aips-bus", "simple-bus"; - reg = <0x30c00000 0x400000>; + aips5: bus@30df0000 { + compatible = "fsl,imx8mp-aipstz"; + reg = <0x30df0000 0x10000>; + power-domains = <&pgc_audio>; #address-cells = <1>; #size-cells = <1>; - ranges; + #access-controller-cells = <3>; + ranges = <0x30c00000 0x30c00000 0x400000>; spba-bus@30c00000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -1770,6 +1805,7 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; + fsl,num-channels = <3>; status = "disabled"; ports { @@ -1805,6 +1841,7 @@ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; + fsl,num-channels = <3>; status = "disabled"; ports { @@ -2073,7 +2110,7 @@ hdmi_pvi: display-bridge@32fc4000 { compatible = "fsl,imx8mp-hdmi-pvi"; - reg = <0x32fc4000 0x1000>; + reg = <0x32fc4000 0x800>; interrupt-parent = <&irqsteer_hdmi>; interrupts = <12>; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; @@ -2099,6 +2136,23 @@ }; }; + hdmi_pai: audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + status = "disabled"; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; + lcdif3: display-controller@32fc6000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32fc6000 0x1000>; @@ -2150,6 +2204,14 @@ reg = <1>; /* Point endpoint to the HDMI connector */ }; + + port@2 { + reg = <2>; + + hdmi_tx_from_pai: endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; @@ -2445,6 +2507,11 @@ firmware-name = "imx/dsp/hifi4.bin"; resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>; reset-names = "runstall"; + access-controllers = <&aips5 + IMX8MP_AIPSTZ_HIFI4 + IMX8MP_AIPSTZ_MASTER + (IMX8MP_AIPSTZ_MPL | IMX8MP_AIPSTZ_MTW | IMX8MP_AIPSTZ_MTR) + >; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index a88bc9034663..d48f901487d4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -375,6 +375,7 @@ <&clk IMX8MQ_CLK_PCIE1_PHY>, <&clk IMX8MQ_CLK_PCIE1_AUX>; vph-supply = <&vgen5_reg>; + supports-clkreq; status = "okay"; }; @@ -397,7 +398,9 @@ <&clk IMX8MQ_CLK_PCIE2_PHY>, <&clk IMX8MQ_CLK_PCIE2_AUX>; vpcie-supply = <®_pcie1>; + vpcie3v3aux-supply = <®_pcie1>; vph-supply = <&vgen5_reg>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi index b1c3f331c4ed..8a37cbe922ac 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi @@ -11,4 +11,12 @@ model = "Toradex Apalis iMX8QM V1.1"; }; -/* TODO: Cooling Maps */ +&cooling_maps_map0 { + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi index f97feee52c81..7594ac61fe56 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi @@ -314,8 +314,6 @@ <IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 0x00000021>; }; -/* TODO: On-module Wi-Fi */ - /* Apalis MMC1 */ &usdhc2 { /* diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 202d5c67ac40..779d9f78fb81 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -217,8 +217,8 @@ compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; - select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>; - enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_LOW>; orientation-switch; port { @@ -249,6 +249,13 @@ regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -323,6 +330,15 @@ enable-active-high; }; + reg_usb_otg1_vbus: regulator-usbotg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&lsio_gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; @@ -566,6 +582,8 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; max7322: gpio@68 { @@ -686,6 +704,16 @@ status = "okay"; }; +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; @@ -775,6 +803,8 @@ pinctrl-names = "default"; reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pciea>; + vpcie3v3aux-supply = <®_pciea>; + supports-clkreq; status = "okay"; }; @@ -800,8 +830,12 @@ }; &usdhc1 { - pinctrl-names = "default"; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -810,8 +844,10 @@ }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>; @@ -819,10 +855,25 @@ status = "okay"; }; +&usbphy1 { + status = "okay"; +}; + &usb3_phy { status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + disable-over-current; + status = "okay"; +}; + &usbotg3 { status = "okay"; }; @@ -896,6 +947,38 @@ status = "okay"; }; +&thermal_zones { + pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -1011,38 +1094,38 @@ pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp { fsl,pins = < - IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 - IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 - IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020 + IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020 >; }; pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp { fsl,pins = < - IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 - IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 - IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020 + IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020 >; }; pinctrl_flexspi0: flexspi0grp { fsl,pins = < - IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 - IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 - IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 - IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 - IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 - IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 - IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 - IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 - IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 - IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 - IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 - IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 - IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 - IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 - IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 - IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 + IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 + IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; @@ -1092,6 +1175,15 @@ >; }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QM_UART1_RX_DMA_UART1_RX 0x06000020 + IMX8QM_UART1_TX_DMA_UART1_TX 0x06000020 + IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020 + IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020 + >; + }; + pinctrl_lpuart2: lpuart2grp { fsl,pins = < IMX8QM_UART0_RTS_B_DMA_UART2_RX 0x06000020 @@ -1201,6 +1293,12 @@ >; }; + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 @@ -1228,4 +1326,12 @@ IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 >; }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021 + IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021 + IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi index c9b55f02497a..7c5386d4ab2b 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi @@ -327,7 +327,8 @@ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */ - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */ + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* sai5 */ + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_2_CH0>, <&pd IMX_SC_R_DMA_2_CH1>, <&pd IMX_SC_R_DMA_2_CH2>, @@ -365,7 +366,8 @@ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */ + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* sai7 */ + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_3_CH0>, <&pd IMX_SC_R_DMA_3_CH1>, <&pd IMX_SC_R_DMA_3_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index d4856b8590e0..5f24850bf322 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -99,7 +99,8 @@ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 5206ca82eaf6..cb66853b1cd3 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -369,7 +369,7 @@ }; }; - thermal-zones { + thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; polling-delay = <2000>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 7b0337445541..523f48896b6b 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -150,6 +150,13 @@ regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_pcieb: regulator-pcie { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -212,6 +219,15 @@ vin-supply = <®_can_en>; }; + reg_fec2_supply: regulator-fec2_nvcc { + compatible = "regulator-fixed"; + regulator-name = "fec2_nvcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usb_otg1_vbus: regulator-usbotg1-vbus { compatible = "regulator-fixed"; regulator-max-microvolt = <5000000>; @@ -397,6 +413,8 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + nvmem-cells = <&fec_mac0>; + nvmem-cell-names = "mac-address"; fsl,magic-packet; status = "okay"; @@ -408,9 +426,26 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + phy-supply = <®_fec2_supply>; + fsl,magic-packet; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + status = "disabled"; +}; + &i2c1 { #address-cells = <1>; #size-cells = <0>; @@ -453,6 +488,8 @@ pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; @@ -586,6 +623,20 @@ status = "okay"; }; +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + &jpegdec { status = "okay"; }; @@ -600,6 +651,16 @@ status = "okay"; }; +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; @@ -631,6 +692,8 @@ pinctrl-names = "default"; reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; + vpcie3v3aux-supply = <®_pcieb>; + supports-clkreq; status = "okay"; }; @@ -729,9 +792,11 @@ &usdhc1 { assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -742,8 +807,10 @@ &usdhc2 { assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; @@ -807,8 +874,8 @@ pinctrl_cm40_i2c: cm40i2cgrp { fsl,pins = < - IMX8QXP_ADC_IN1_M40_I2C0_SDA 0x0600004c - IMX8QXP_ADC_IN0_M40_I2C0_SCL 0x0600004c + IMX8QXP_ADC_IN1_M40_I2C0_SDA 0x0600004c + IMX8QXP_ADC_IN0_M40_I2C0_SCL 0x0600004c >; }; @@ -821,16 +888,16 @@ pinctrl_esai0: esai0grp { fsl,pins = < - IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040 - IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040 - IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040 - IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040 - IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040 - IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040 - IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040 - IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040 - IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040 - IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040 + IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040 + IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040 + IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040 + IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040 + IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040 + IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040 + IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040 + IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040 + IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040 + IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040 >; }; @@ -853,6 +920,23 @@ >; }; + pinctrl_fec2: fec2grp { + fsl,pins = < + IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000060 + IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x00000060 + IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000060 + IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000060 + IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x00000060 + IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x00000060 + IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x00000060 + IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000060 + IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000060 + IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000060 + IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x00000060 + IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + pinctrl_flexcan1: flexcan0grp { fsl,pins = < IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 @@ -874,6 +958,27 @@ >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8QXP_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 + IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 + >; + }; + pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 @@ -900,17 +1005,26 @@ >; }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_TX_ADMA_UART1_TX 0x06000020 + IMX8QXP_UART1_RX_ADMA_UART1_RX 0x06000020 + IMX8QXP_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020 + IMX8QXP_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020 + >; + }; + pinctrl_lpuart2: lpuart2grp { fsl,pins = < - IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 - IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 >; }; pinctrl_lpuart3: lpuart3grp { fsl,pins = < - IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 - IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 >; }; @@ -932,13 +1046,13 @@ pinctrl_typec: typecgrp { fsl,pins = < - IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 + IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 >; }; pinctrl_typec_mux: typecmuxgrp { fsl,pins = < - IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 >; }; @@ -953,11 +1067,11 @@ pinctrl_sai1: sai1grp { fsl,pins = < - IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD 0x06000040 - IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC 0x06000040 - IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS 0x06000040 - IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD 0x06000060 - IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x06000040 + IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD 0x06000040 + IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC 0x06000040 + IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS 0x06000040 + IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD 0x06000060 + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x06000040 >; }; @@ -977,6 +1091,14 @@ >; }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 95edab058276..7c4a50e0ec9e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -234,11 +234,20 @@ compatible = "fsl,imx8qxp-scu-ocotp"; #address-cells = <1>; #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + + fec_mac1: mac@2c6 { + reg = <0x2c6 6>; + }; }; scu_key: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = <KEY_POWER>; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts new file mode 100644 index 000000000000..7b18a58024f5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Christoph Stoidner <c.stoidner@phytec.de> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX91 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx91-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX91"; + compatible = "phytec,imx91-phyboard-segin", "phytec,imx91-phycore-som", + "fsl,imx91"; + + aliases { + ethernet1 = &eqos; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &bbnsm_rtc; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + flexcan1_tc: can-phy0 { + /* TI SN65HVD234D CAN-CC 1MBit/s */ + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_tc>; + enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + }; + + reg_sound_1v8: regulator-sound-1v8 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VCC1V8_AUDIO"; + }; + + reg_sound_3v3: regulator-sound-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC3V3_ANALOG"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG1_VBUS"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG2_VBUS"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&clk IMX93_CLK_SAI1>; + }; + }; +}; + +/* Ethernet */ +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1561"; + reg = <2>; + clocks = <&clk IMX91_CLK_ENET2_REGULAR>; + clock-names = "rmii-ref"; + micrel,led-mode = <1>; + }; +}; + +/* CAN */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + phys = <&flexcan1_tc>; + status = "okay"; +}; + +/* I2C2 */ +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2_gpio>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Codec */ + audio_codec: audio-codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + }; + + /* RTC */ + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Audio */ +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <19200000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +/* USB */ +&usbphynop1 { + vbus-supply = <®_usb_otg1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb_otg2_vbus>; +}; + +&usbotg1 { + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + disable-wp; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK 0x4000050e + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x50e + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x50e + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e + MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + MX91_PAD_PDM_CLK__CAN1_TX 0x139e + >; + }; + + pinctrl_flexcan1_tc: flexcan1tcgrp { + fsl,pins = < + MX91_PAD_ENET2_TD3__GPIO4_IO16 0x31e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2_gpio: lpi2c2gpiogrp { + fsl,pins = < + MX91_PAD_I2C2_SCL__GPIO1_IO2 0x31e + MX91_PAD_I2C2_SDA__GPIO1_IO3 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX91_PAD_ENET2_RD2__GPIO4_IO26 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX91_PAD_UART2_RXD__SAI1_MCLK 0x1202 + MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x1202 + MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x1202 + MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x1402 + MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x1402 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX91_PAD_UART1_RXD__LPUART1_RX 0x31e + MX91_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e + >; + }; + + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382 + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1386 + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi new file mode 100644 index 000000000000..29a428a052b0 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Christoph Stoidner <c.stoidner@phytec.de> + * + * Product homepage: + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ + */ + +#include <dt-bindings/leds/common.h> + +#include "imx91.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX91"; + compatible = "phytec,imx91-phycore-som", "fsl,imx91"; + + aliases { + ethernet0 = &fec; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vdda_1v8: regulator-vdda-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDA_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + vin-supply = <&buck5>; + }; +}; + +/* ADC */ +&adc1 { + vref-supply = <®_vdda_1v8>; +}; + +/* Ethernet */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>, + <&clk IMX91_CLK_ENET2_REGULAR>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>; + status = "okay"; + + mdio: mdio { + clock-frequency = <5000000>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + reset-assert-us = <30>; + }; + }; +}; + +/* I2C3 */ +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <610000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "VDDQ_0V6"; + regulator-max-microvolt = <600000>; + regulator-min-microvolt = <600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3_BUCK"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "VDD_1V1"; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "PMIC_SNVS_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_0V8"; + regulator-max-microvolt = <800000>; + regulator-min-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* EEPROM */ + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&buck4>; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX91_PAD_ENET2_MDC__ENET2_MDC 0x50e + MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x502 + /* the three pins below are connected to PHYs straps, + * that is what the pull-up/down setting is for. + */ + MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x37e + MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x37e + MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e + MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x50e + MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x50e + MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x50e + MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x4000050e + MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX91_PAD_I2C1_SDA__GPIO1_IO1 0x11e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = < + MX91_PAD_GPIO_IO28__GPIO2_IO28 0x31e + MX91_PAD_GPIO_IO29__GPIO2_IO29 0x31e + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX91_PAD_ENET2_RD3__GPIO4_IO27 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX91_PAD_SD1_CMD__USDHC1_CMD 0x1386 + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x139e + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13be + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x139e + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x139e + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x139e + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x139e + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x139e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x139e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13be + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13be + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13be + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13be + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13be + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13be + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13be + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi index 52da571f26c4..7958cef35376 100644 --- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi @@ -706,7 +706,7 @@ }; flexspi1: spi@425e0000 { - compatible = "nxp,imx8mm-fspi"; + compatible = "nxp,imx93-fspi", "nxp,imx8mm-fspi"; reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso new file mode 100644 index 000000000000..89f93dca3208 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser <primoz.fiser@norik.com> + */ + +#include "imx93-pinfunc.h" + +/dts-v1/; +/plugin/; + +/* + * NOTE: Bind pinctrl_jtag to gpio2 so that the pinctrl settings are applied. + * JTAG itself has no dedicated driver, so without attaching it to an active + * device node (like gpio2), the pinmux configuration would not take effect. + */ +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_jtag>; +}; + +&iomuxc { + pinctrl_jtag: jtaggrp { + fsl,pins = < + MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x31e + MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x31e + MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x31e + MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso new file mode 100644 index 000000000000..d1adf04d56d9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser <primoz.fiser@norik.com> + */ + +#include <dt-bindings/pwm/pwm.h> +#include "imx93-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + cooling-levels = <1 90 150 200 255>; + pwms = <&tpm6 1 40000 PWM_POLARITY_INVERTED>; + }; + + thermal-zones { + cpu-thermal { + trips { + cpu_low: cpu-low { + hysteresis = <3000>; + temperature = <50000>; + type = "active"; + }; + + cpu_med: cpu-med { + hysteresis = <3000>; + temperature = <58000>; + type = "active"; + }; + + cpu_high: cpu-high { + hysteresis = <3000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + cooling-device = <&fan0 1 1>; + trip = <&cpu_low>; + }; + + map2 { + cooling-device = <&fan0 2 2>; + trip = <&cpu_med>; + }; + + map3 { + cooling-device = <&fan0 4 4>; + trip = <&cpu_high>; + }; + }; + }; + }; +}; + +&tpm6 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fan: fangrp { + fsl,pins = < + MX93_PAD_GPIO_IO23__TPM6_CH1 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts index 5599e296919f..9e875e082ee8 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts @@ -71,6 +71,22 @@ io-channels = <&curr_sens 0>; }; + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; @@ -187,6 +203,14 @@ }; /* USB */ +&usbphynop1 { + vbus-supply = <®_usb1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb2_vbus>; +}; + &usbotg1 { disable-over-current; dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts index 802d96b19e4c..ac64abacc4a2 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -59,6 +59,22 @@ regulator-name = "VCC3V3_ANALOG"; }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; enable-active-high; @@ -177,6 +193,14 @@ }; /* USB */ +&usbphynop1 { + vbus-supply = <®_usb_otg1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb_otg2_vbus>; +}; + &usbotg1 { disable-over-current; dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 82914ca148d3..3a23e2eb9feb 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -67,6 +67,7 @@ spi-max-frequency = <62000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + vcc-supply = <&buck5>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi index a5f09487d803..2dc8b18ae91e 100644 --- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -12,7 +12,35 @@ model = "Variscite VAR-SOM-MX93 module"; compatible = "variscite,var-som-mx93", "fsl,imx93"; - mmc_pwrseq: mmc-pwrseq { + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "wm8904-audio"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Microphone Jack", + "IN1R", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + simple-audio-card,mclk-fs = <256>; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + }; + + usdhc3_pwrseq: mmc-pwrseq { compatible = "mmc-pwrseq-simple"; post-power-on-delay-ms = <100>; power-off-delay-us = <10000>; @@ -70,6 +98,175 @@ }; }; +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clk IMX93_CLK_SAI1_GATE>; + clock-names = "mclk"; + AVDD-supply = <&buck5>; + CPVDD-supply = <&buck5>; + DBVDD-supply = <&buck4>; + DCVDD-supply = <&buck5>; + MICVDD-supply = <&buck5>; + wlf,drc-cfg-names = "default", "peaklimiter", "tradition", + "soft", "music"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1 + * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1 + * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>, + /bits/ 16 <0x04af 0x324b 0x0028 0x0704>, + /bits/ 16 <0x04af 0x324b 0x0018 0x078c>, + /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + }; +}; + +&lpspi8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi8>; + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* Resistive touch controller */ + ads7846: touchscreen@0 { + compatible = "ti,ads7846"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <1000000>; + pendown-gpio = <&gpio4 29 0>; + vcc-supply = <&buck5>; + ti,x-min = /bits/ 16 <125>; + ti,x-max = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + ti,y-max = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + ti,debounce-max = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; +}; + +/* BT module */ +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart5>, <&pinctrl_bluetooth>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&sai1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-1 = <&pinctrl_sai1_sleep>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + /* eMMC */ &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -81,7 +278,27 @@ status = "okay"; }; +/* WiFi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + bus-width = <4>; + mmc-pwrseq = <&usdhc3_pwrseq>; + non-removable; + wakeup-source; + status = "okay"; +}; + &iomuxc { + pinctrl_bluetooth: bluetoothgrp { + fsl,pins = < + MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e @@ -108,6 +325,68 @@ >; }; + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e + MX93_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX93_PAD_GPIO_IO12__GPIO2_IO12 0x31e + MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x31e + MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e + MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x31e + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_restouch: restouchgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e + MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e + MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e + MX93_PAD_UART2_RXD__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1-sleepgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x31e + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x31e + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x31e + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x31e + MX93_PAD_UART2_RXD__GPIO1_IO06 0x31e + MX93_PAD_I2C2_SDA__GPIO1_IO03 0x31e + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x31e + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe @@ -123,4 +402,55 @@ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x400 + MX93_PAD_SD3_CMD__GPIO3_IO21 0x400 + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x400 + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x400 + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x400 + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x400 + >; + }; + + pinctrl_usdhc3_wlan: usdhc3-wlangrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e /* WIFI_REG_ON */ + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x51e /* WIFI_PWR_EN */ + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi index d4a880496b0e..73184f03f8a3 100644 --- a/arch/arm64/boot/dts/freescale/imx94.dtsi +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi @@ -1190,5 +1190,11 @@ status = "disabled"; }; }; + + ddr-pmu@4e090dc0 { + compatible = "fsl,imx94-ddr-pmu", "fsl,imx93-ddr-pmu"; + reg = <0x0 0x4e090dc0 0x0 0x200>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts index 148243470dd4..c1e245ecea9c 100644 --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -61,6 +61,7 @@ fan0: pwm-fan { compatible = "pwm-fan"; + fan-supply = <®_vcc_12v>; #cooling-cells = <2>; cooling-levels = <64 128 192 255>; pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>; @@ -556,6 +557,8 @@ pinctrl-names = "default"; reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>; vpcie-supply = <®_m2_pwr>; + vpcie3v3aux-supply = <®_m2_pwr>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index 9f968feccef6..aaa0da55a22b 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -542,6 +542,8 @@ pinctrl-names = "default"; reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; + vpcie3v3aux-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; @@ -557,6 +559,7 @@ pinctrl-names = "default"; reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; vpcie-supply = <®_slot_pwr>; + vpcie3v3aux-supply = <®_slot_pwr>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts new file mode 100644 index 000000000000..2b0ff232f680 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts @@ -0,0 +1,695 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 NXP + * Copyright 2025 Marek Vasut <marek.vasut@mailbox.org> + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx95.dtsi" + +#define FALLING_EDGE 1 +#define RISING_EDGE 2 + +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /* PCAL6408A-0 */ +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /* PCAL6408A-4 */ +#define BRD_SM_CTRL_BT_WAKE 0x8002 /* PCAL6408A-5 */ +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /* PCAL6408A-6 */ +#define BRD_SM_CTRL_BUTTON 0x8004 /* PCAL6408A-7 */ + +/ { + model = "i.MX 95 Verdin Evaluation Kit (EVK)"; + compatible = "toradex,verdin-imx95-19x19-evk", "fsl,imx95"; + + aliases { + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + ethernet2 = &enetc_port2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "PCIE_WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&i2c7_pcal6524 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VDD_SD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <12000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&i2c7_pcal6524 11 GPIO_ACTIVE_HIGH>; + }; + + sound-wm8904 { + compatible = "fsl,imx-audio-wm8904"; + model = "wm8904-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8904>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "AMIC", "MICBIAS", + "IN2L", "AMIC"; + }; +}; + +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&flexspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1_reset>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <200000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c4>; + status = "okay"; + + wm8904: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + clock-names = "mclk"; + AVDD-supply = <®_1p8v>; + CPVDD-supply = <®_1p8v>; + DBVDD-supply = <®_1p8v>; + DCVDD-supply = <®_1p8v>; + MICVDD-supply = <®_1p8v>; + }; +}; + +&lpi2c5 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c5>; + status = "okay"; +}; + +&lpi2c6 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c6>; + status = "okay"; +}; + +&lpi2c7 { + clock-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c7>; + status = "okay"; + + i2c7_pcal6524: i2c7-gpio@23 { + compatible = "nxp,pcal6524"; + reg = <0x23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_pcal6524>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; + + /* Current measurement at SoM 5V power output */ + hwmon@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <10000>; + }; + + /* Current measurement at Board power input */ + hwmon@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <10000>; + }; + + eeprom@50 { + compatible = "st,24c02"; + reg = <0x50>; + }; + + ptn5110: tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio5>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_con_hs: endpoint { + remote-endpoint = <&usb3_data_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&mu7 { + status = "okay"; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + }; +}; + +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 17 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sai1 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + role-switch-default-mode = "peripheral"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + status = "okay"; + + port { + usb3_data_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3_phy { + fsl,phy-tx-preemp-amp-tune-microamp = <600>; + orientation-switch; + status = "okay"; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_pcie0>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&scmi_misc { + nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE FALLING_EDGE + BRD_SM_CTRL_PCIE1_WAKE FALLING_EDGE + BRD_SM_CTRL_BT_WAKE FALLING_EDGE + BRD_SM_CTRL_PCIE2_WAKE FALLING_EDGE + BRD_SM_CTRL_BUTTON FALLING_EDGE>; +}; + +&wdog3 { + fsl,ext-reset-output; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = + <IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x3fe>; + }; + + pinctrl_emdio: emdiogrp { + fsl,pins = + <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x57e>, + <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e>; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = + <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e>, + <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e>, + <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e>, + <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e>, + <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e>, + <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e>, + <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e>, + <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e>, + <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e>, + <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e>, + <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e>, + <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e>; + }; + + pinctrl_flexspi1: flexspi1grp { + fsl,pins = + <IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe>, + <IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe>, + <IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe>, + <IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe>, + <IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe>, + <IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe>, + <IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe>, + <IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe>, + <IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe>, + <IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe>, + <IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe>; + }; + + pinctrl_flexspi1_reset: flexspi1-reset-grp { + fsl,pins = + <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe>; + }; + + pinctrl_hp: hpgrp { + fsl,pins = + <IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e>; + }; + + pinctrl_i2c4_pcal6408: i2c4pcal6498grp { + fsl,pins = + <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e>; + }; + + pinctrl_i2c7_pcal6524: i2c7pcal6524grp { + fsl,pins = + <IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e>; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = + <IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e>, + <IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e>; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = + <IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e>, + <IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e>; + }; + + pinctrl_lpi2c6: lpi2c6grp { + fsl,pins = + <IMX95_PAD_GPIO_IO02__LPI2C6_SDA 0x40000b9e>, + <IMX95_PAD_GPIO_IO03__LPI2C6_SCL 0x40000b9e>; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = + <IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e>, + <IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x40000b9e>; + }; + + pinctrl_pcal6416: pcal6416grp { + fsl,pins = + <IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28 0x31e>; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = + <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e>; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = + <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e>; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = + <IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e>, + <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e>; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = + <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e>; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = + <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x31e>, + <IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x31e>, + <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x31e>, + <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x31e>; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = + <IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e>, + <IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e>, + <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e>, + <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e>, + <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e>, + <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e>, + <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e>, + <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e>, + <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e>, + <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e>, + <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e>; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = + <IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e>, + <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e>, + <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e>, + <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e>, + <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e>; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = + <IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e>; + }; + + pinctrl_typec: typecgrp { + fsl,pins = + <IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e>, + <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e>, + <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e>, + <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e>, + <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e>, + <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e>, + <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e>, + <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e>, + <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e>, + <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e>, + <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e>, + <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e>, + <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e>, + <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e>, + <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e>, + <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e>, + <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e>, + <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e>, + <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e>, + <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e>, + <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e>, + <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe>, + <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe>, + <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe>, + <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe>, + <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe>, + <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe>, + <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe>, + <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe>, + <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe>, + <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe>, + <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe>; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = + <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e>, + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e>, + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>, + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>, + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>, + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>, + <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e>, + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e>, + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>, + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>, + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>, + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>, + <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe>, + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe>, + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe>, + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe>, + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe>, + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe>, + <IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e>, + <IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e>, + <IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e>, + <IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e>, + <IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e>, + <IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts new file mode 100644 index 000000000000..5b05f256fd52 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/smarc-development-board-kit + */ + +/dts-v1/; + +#include <dt-bindings/pwm/pwm.h> +#include "imx95-toradex-smarc.dtsi" + +/ { + model = "Toradex SMARC iMX95 on Toradex SMARC Development Board"; + compatible = "toradex,smarc-imx95-dev", + "toradex,smarc-imx95", + "fsl,imx95"; + + reg_carrier_1p8v: regulator-carrier-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-carrier 1V8"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "tdx-smarc-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN1L", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + clocks = <&scmi_clk IMX95_CLK_SAI3>; + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + }; +}; + +/* SMARC GBE0 */ +&enetc_port0 { + status = "okay"; +}; + +/* SMARC GBE1 */ +&enetc_port1 { + status = "okay"; +}; + +/* SMARC CAN0 */ +&flexcan1 { + status = "okay"; +}; + +/* SMARC CAN1 */ +&flexcan2 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio12>, <&pinctrl_gpio13>; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio10>, <&pinctrl_gpio11>; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>, + <&pinctrl_gpio3>, + <&pinctrl_gpio4>, + <&pinctrl_gpio6>, + <&pinctrl_gpio8>, + <&pinctrl_gpio9>; +}; + +/* SMARC I2C_CAM0 */ +&i2c_cam0 { + status = "okay"; +}; + +/* SMARC I2C_CAM1 */ +&i2c_cam1 { + status = "okay"; +}; + +/* SMARC I2C_GP */ +&lpi2c2 { + status = "okay"; + + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>, <&pinctrl_sai3_mclk>; + #sound-dai-cells = <0>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + clock-names = "mclk"; + AVDD-supply = <®_carrier_1p8v>; + CPVDD-supply = <®_carrier_1p8v>; + DBVDD-supply = <®_carrier_1p8v>; + DCVDD-supply = <®_carrier_1p8v>; + MICVDD-supply = <®_carrier_1p8v>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; + +}; + +/* SMARC I2C_PM */ +&lpi2c3 { + clock-frequency = <100000>; + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + cooling-levels = <255>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; +}; + +/* SMARC I2C_LCD */ +&lpi2c5 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + i2c-mux-idle-disconnect; + #address-cells = <1>; + #size-cells = <0>; + + /* I2C on DSI Connector Pins 4/6 */ + i2c_dsi_0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* I2C on DSI Connector Pins 52/54 */ + i2c_dsi_1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* SMARC SPI0 */ +&lpspi6 { + status = "okay"; +}; + +/* SMARC SER1, used as the Linux Console */ +&lpuart1 { + status = "okay"; +}; + +/* SMARC SER0, RS485 */ +&lpuart2 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* SMARC SER3, RS232 */ +&lpuart3 { + status = "okay"; +}; + +/* SMARC MDIO, shared between all ethernet ports */ +&netc_emdio { + status = "okay"; + + ethphy3: ethernet-phy@4 { + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio7>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* SMARC PCIE_A / M2 Key B */ +&pcie0 { + status = "okay"; +}; + +/* SMARC PCIE_B / M2 Key E */ +&pcie1 { + status = "okay"; +}; + +/* SMARC I2S0 */ +&sai3 { + status = "okay"; +}; + +/* SMARC LCD0_BKLT_PWM */ +&tpm3 { + status = "okay"; +}; + +/* SMARC LCD1_BKLT_PWM */ +&tpm4 { + status = "okay"; +}; + +/* SMARC GPIO5 as PWM */ +&tpm5 { + status = "okay"; +}; + +/* SMARC USB0 */ +&usb2 { + status = "okay"; +}; + +/* SMARC USB1..4 */ +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +/* SMARC SDIO */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi new file mode 100644 index 000000000000..afbdadcb3686 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi @@ -0,0 +1,1155 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "imx95.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + rtc0 = &rtc_i2c; + rtc1 = &scmi_bbm; + serial0 = &lpuart2; + serial1 = &lpuart1; + serial3 = &lpuart3; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + clk_dsi2dp_bridge: clock-dsi2dp-bridge { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clk_serdes_eth_ref: clock-eth-ref { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + /* CTRL_ETH_REF_CLK_STBY# */ + enable-gpios = <&som_gpio_expander_1 13 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + /* SMARC P64 - USB0_OTG_ID */ + id-gpios = <&som_gpio_expander_0 3 GPIO_ACTIVE_HIGH>; + label = "USB0"; + self-powered; + type = "micro"; + vbus-supply = <®_usb0_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb0_otg_id>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + smarc_key_sleep: key-sleep { + gpios = <&som_ec_gpio_expander 4 GPIO_ACTIVE_LOW>; + label = "SMARC_SLEEP#"; + wakeup-source; + linux,code = <KEY_SLEEP>; + }; + + smarc_switch_lid: switch-lid { + gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>; + label = "SMARC_LID#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + }; + }; + + reg_module_1p8v: regulator-module-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8"; + }; + + /* Non PMIC On-module Supplies */ + reg_module_dp_1p2v: regulator-module-dp-1p2v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "On-module +V1.2_DP"; + vin-supply = <®_module_1p8v>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + /* SMARC P62 - USB0_EN_OC# */ + gpios = <&som_gpio_expander_0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "USB0_EN_OC#"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + /* CTRL_V_BUS_USB_HUB or SMARC P71 - USB2_EN_OC# */ + gpios = <&som_gpio_expander_0 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "CTRL_V_BUS_USB_HUB"; + }; + + reg_usdhc2_vmmc: regulator-vmmc-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "SDIO_PWR_EN"; + startup-delay-us = <20000>; + }; + + reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vsel>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + states = <1800000 0x1>, + <3300000 0x0>; + regulator-name = "PMIC_SD2_VSEL"; + }; + + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + /* CTRL_EN_WIFI */ + gpios = <&som_gpio_expander_1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "CTRL_EN_WIFI"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x3c000000>; + alloc-ranges = <0 0x80000000 0 0x7F000000>; + linux,cma-default; + }; + }; +}; + +/* SMARC GBE0 */ +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>, <&pinctrl_enetc0_1588_tmr>; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; +}; + +/* SMARC GBE1 */ +&enetc_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc1>, <&pinctrl_enetc1_1588_tmr>; + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; +}; + +/* SMARC CAN0 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* SMARC CAN1 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "SMARC_I2C_GP_CK", + "SMARC_I2C_GP_DAT", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "CTRL_IO_EXP_INT_B"; + status = "okay"; +}; + +&gpio2 { + gpio-line-names = "SMARC_SPI0_CS0#", /* 0 */ + "", + "", + "", + "", + "", + "SMARC_GPIO5", + "", + "I2C_CAM_DAT", + "I2C_CAM_CK", + "SMARC_GPIO12", /* 10 */ + "SMARC_GPIO13", + "", + "", + "", + "", + "", + "", + "SMARC_SPI1_CS0#", + "", + "", /* 20 */ + "", + "SMARC_I2C_LCD_DAT", + "SMARC_I2C_LCD_CK", + "SMARC_SPI0_CS1#", + "", + "", + "", + "SMARC_I2C_PM_DAT", + "SMARC_I2C_PM_CK", + "I2C_SOM_DAT", /* 30 */ + "I2C_SOM_CK"; + status = "okay"; +}; + +&gpio3 { + gpio-line-names = "SMARC_SDIO_CD#", /* 0 */ + "", + "", + "", + "", + "", + "", + "SMARC_SDIO_PWR_EN", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "PMIC_SD2_VSEL"; + status = "okay"; +}; + +&gpio4 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "SMARC_GPIO11", + "SMARC_GPIO10", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "SMARC_SMB_ALERT#"; + status = "okay"; +}; + +&gpio5 { + gpio-line-names = "SMARC_GPIO2", /* 0 */ + "SMARC_GPIO3", + "SMARC_GPIO4", + "SMARC_GPIO6", + "", + "", + "", + "", + "SMARC_GPIO9", + "SMARC_GPIO7", + "SMARC_GPIO8", /* 10 */ + "SMARC_SPI1_CS1#", + "", + "SPI1_TPM_CS#"; + status = "okay"; +}; + +/* SMARC I2C_GP */ +&lpi2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@50 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +/* SMARC I2C_PM */ +&lpi2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* I2C_SOM */ +&lpi2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c4>, <&pinctrl_ctrl_io_exp_int_b>; + pinctrl-1 = <&pinctrl_lpi2c4_gpio>, <&pinctrl_ctrl_io_exp_int_b>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + som_gpio_expander_0: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_PCIE_WAKE#", /* 0 */ + "SMARC_PCIE_B_RST#", + "SMARC_PCIE_A_RST#", + "SMARC_USB0_OTG_ID", + "SMARC_USB0_EN", /* SMARC USB0_EN_OC# - Open Drain Output */ + "SMARC_USB0_OC#", /* SMARC USB0_EN_OC# - Over-Current Sense Input */ + "", + "SMARC_PCIE_C_RST#"; + }; + + som_gpio_expander_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_GPIO0", /* 0 */ + "SMARC_GPIO1", + "SMARC_LCD0_VDD_EN", + "SMARC_LCD0_BKLT_EN", + "SMARC_LCD1_VDD_EN", + "SMARC_LCD1_BKLT_EN", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "SMARC_SDIO_WP"; + }; + + embedded-controller@28 { + compatible = "toradex,smarc-imx95-ec", "toradex,smarc-ec"; + reg = <0x28>; + }; + + som_ec_gpio_expander: gpio@29 { + compatible = "toradex,ecgpiol16", "nxp,pcal6416"; + reg = <0x29>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec_int>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_CHARGER_PRSNT#", + "SMARC_CHARGING#", + "SMARC_LID#", + "SMARC_BATLOW#", + "SMARC_SLEEP#"; + }; + + /* SMARC DP0 */ + som_dsi2dp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + clocks = <&clk_dsi2dp_bridge>; + clock-names = "refclk"; + vcc-supply = <®_module_dp_1p2v>; + vcca-supply = <®_module_dp_1p2v>; + vccio-supply = <®_module_1p8v>; + vpll-supply = <®_module_1p8v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <3 2 1 0>; + }; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* SMARC I2C_LCD */ +&lpi2c5 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* I2C_CAM */ +&lpi2c7 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c7>; + pinctrl-1 = <&pinctrl_lpi2c7_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + /* SMARC I2C_CAM0 */ + i2c_cam0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* SMARC I2C_CAM1 */ + i2c_cam1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* SMARC SPI1 */ +&lpspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi4>; + cs-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>, + <&gpio5 11 GPIO_ACTIVE_LOW>, + <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + som_tpm: tpm@2 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0x2>; + spi-max-frequency = <18500000>; + }; +}; + +/* SMARC SPI0 */ +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>, + <&gpio2 24 GPIO_ACTIVE_LOW>; +}; + +/* SMARC SER1, used as the Linux Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +/* SMARC SER0 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* SMARC SER3 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +/* SMARC MDIO, shared between all ethernet ports */ +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_timer { + status = "okay"; +}; + +/* SMARC PCIE_A */ +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_LOW>; +}; + +/* SMARC PCIE_B */ +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpios = <&som_gpio_expander_0 1 GPIO_ACTIVE_LOW>; +}; + +/* SMARC I2S0 */ +&sai3 { + #sound-dai-cells = <0>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; +}; + +&thermal_zones { + /* PF09 Main PMIC */ + pf09-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 2>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_ARM PMIC */ + pf53-arm-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 4>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_SOC PMIC */ + pf53-soc-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 3>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; +}; + +/* SMARC LCD0_BKLT_PWM */ +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_bklt_pwm>; +}; + +/* SMARC LCD1_BKLT_PWM */ +&tpm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_bklt_pwm>; +}; + +/* SMARC GPIO5 as PWM */ +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5_pwm>; +}; + +/* SMARC USB0 */ +&usb2 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + srp-disable; + usb-role-switch; + vbus-supply = <®_usb0_vbus>; + + port { + usb0_otg_id: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; +}; + +&usb3 { + fsl,disable-port-power-control; +}; + +/* SMARC USB1..4 */ +&usb3_dwc3 { + dr_mode = "host"; +}; + +&usb3_phy { + vbus-supply = <®_usb1_vbus>; +}; + +/* On-module eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +/* SMARC SDIO */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; + wp-gpios = <&som_gpio_expander_1 15 GPIO_ACTIVE_HIGH>; +}; + +/* On-module Wi-Fi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_wifi_en>; +}; + +&scmi_bbm { + linux,code = <KEY_POWER>; +}; + +&wdog3 { + fsl,ext-reset-output; + status = "okay"; +}; + +&scmi_iomuxc { + /* SMARC CAM_MCK */ + pinctrl_cam_mck: cammckgrp { + fsl,pins = <IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1 0x51e>; /* SMARC S6 - CAM_MCK */ + }; + + pinctrl_ec_int: ecintgrp { + fsl,pins = <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11 0x31e>; /* SAI1_TXFS - EC_MCU_INT# */ + }; + + /* SMARC MDIO, shared between all ethernet ports */ + pinctrl_emdio: emdiogrp { + fsl,pins = <IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x50e>, /* SMARC S45 - MDIO_CLK */ + <IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e>; /* SMARC S46 - MDIO_DAT */ + }; + + /* SMARC GBE0 */ + pinctrl_enetc0: enetc0grp { + fsl,pins = <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e>, /* ENET1_TX_CTL */ + <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e>, /* ENET1_TXC */ + <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e>, /* ENET1_TDO */ + <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e>, /* ENET1_TD1 */ + <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e>, /* ENET1_TD2 */ + <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e>, /* ENET1_TD3 */ + <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e>, /* ENET1_RX_CTL */ + <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e>, /* ENET1_RXC */ + <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e>, /* ENET1_RD0 */ + <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e>, /* ENET1_RD1 */ + <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e>, /* ENET1_RD2 */ + <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e>; /* ENET1_RD3 */ + }; + + /* SMARC GBE0_SDP */ + pinctrl_enetc0_1588_tmr: enetc01588tmrgrp { + fsl,pins = <IMX95_PAD_CCM_CLKO2__NETCMIX_TOP_NETC_TMR_1588_PP1 0x51e>; /* SMARC P6 - GBE0_SDP */ + }; + + /* SMARC GBE1 */ + pinctrl_enetc1: enetc1grp { + fsl,pins = <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e>, /* ENET2_TX_CTL */ + <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e>, /* ENET2_TXC */ + <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x50e>, /* ENET2_TD0 */ + <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x50e>, /* ENET2_TD1 */ + <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x50e>, /* ENET2_TD2 */ + <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x50e>, /* ENET2_TD3 */ + <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e>, /* ENET2_RX_CTL */ + <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e>, /* ENET2_RXC */ + <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e>, /* ENET2_RD0 */ + <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e>, /* ENET2_RD1 */ + <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e>, /* ENET2_RD2 */ + <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e>; /* ENET2_RD3 */ + }; + + /* SMARC GBE1_SDP */ + pinctrl_enetc1_1588_tmr: enetc11588tmrgrp { + fsl,pins = <IMX95_PAD_CCM_CLKO4__NETCMIX_TOP_NETC_TMR_1588_PP2 0x51e>; /* SMARC P5 - GBE1_SDP */ + }; + + /* SMARC CAN0 */ + pinctrl_flexcan1: flexcan1grp { + fsl,pins = <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e>, /* SMARC P143 - CAN0_TX */ + <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e>; /* SMARC P144 - CAN0_RX */ + }; + + /* SMARC CAN1 */ + pinctrl_flexcan2: flexcan2grp { + fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX 0x39e>, /* SMARC P145 - CAN1_TX */ + <IMX95_PAD_GPIO_IO27__CAN2_RX 0x39e>; /* SMARC P146 - CAN1_RX */ + }; + + /* SMARC GPIO2 */ + pinctrl_gpio2: gpio2grp { + fsl,pins = <IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0 0x31e>; /* SMARC P110 - GPIO2 */ + }; + + /* SMARC GPIO3 */ + pinctrl_gpio3: gpio3grp { + fsl,pins = <IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1 0x31e>; /* SMARC P111 - GPIO3 */ + }; + + /* SMARC GPIO4 */ + pinctrl_gpio4: gpio4grp { + fsl,pins = <IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2 0x31e>; /* SMARC P112 - GPIO4 */ + }; + + /* SMARC GPIO5 */ + pinctrl_gpio5: gpio5grp { + fsl,pins = <IMX95_PAD_GPIO_IO06__GPIO2_IO_BIT6 0x31e>; /* SMARC P113 - GPIO5 */ + }; + + /* SMARC GPIO5 as PWM */ + pinctrl_gpio5_pwm: gpio5pwmgrp { + fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0 0x11e>; /* SMARC P113 - PWM_OUT */ + }; + + /* SMARC GPIO6 */ + pinctrl_gpio6: gpio6grp { + fsl,pins = <IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3 0x31e>; /* SMARC P114 - GPIO6 */ + }; + + /* SMARC GPIO7 */ + pinctrl_gpio7: gpio7grp { + fsl,pins = <IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9 0x31e>; /* SMARC P115 - GPIO7 */ + }; + + /* SMARC GPIO8 */ + pinctrl_gpio8: gpio8grp { + fsl,pins = <IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10 0x31e>; /* SMARC P116 - GPIO8 */ + }; + + /* SMARC GPIO9 */ + pinctrl_gpio9: gpio9grp { + fsl,pins = <IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8 0x31e>; /* SMARC P117 - GPIO9 */ + }; + + /* SMARC GPIO10 */ + pinctrl_gpio10: gpio10grp { + fsl,pins = <IMX95_PAD_ENET2_MDIO__GPIO4_IO_BIT15 0x31e>; /* SMARC P118 - GPIO10 */ + }; + + /* SMARC GPIO11 */ + pinctrl_gpio11: gpio11grp { + fsl,pins = <IMX95_PAD_ENET2_MDC__GPIO4_IO_BIT14 0x31e>; /* SMARC P119 - GPIO11 */ + }; + + /* SMARC GPIO12 */ + pinctrl_gpio12: gpio12grp { + fsl,pins = <IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10 0x31e>; /* SMARC S142 - GPIO12 */ + }; + + /* SMARC GPIO13 */ + pinctrl_gpio13: gpio13grp { + fsl,pins = <IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e>; /* SMARC S123 - GPIO13 */ + }; + + pinctrl_ctrl_io_exp_int_b: ioexpintgrp { + fsl,pins = <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14 0x31e>; /* CTRL_IO_EXP_INT_B */ + }; + + /* SMARC LCD0_BKLT_PWM */ + pinctrl_lcd0_bklt_pwm: lcd0bkltpwmgrp { + fsl,pins = <IMX95_PAD_GPIO_IO12__TPM3_CH2 0x51e>; /* SMARC S141 - LCD0_BKLT_PWM */ + }; + + /* SMARC LCD1_BKLT_PWM */ + pinctrl_lcd1_bklt_pwm: lcd1bkltpwmgrp { + fsl,pins = <IMX95_PAD_GPIO_IO13__TPM4_CH2 0x51e>; /* SMARC S122 - LCD1_BKLT_PWM */ + }; + + /* SMARC I2C_GP */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL 0x40001b9e>, /* SMARC S48 - I2C_GP_CK */ + <IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA 0x40001b9e>; /* SMARC S49 - I2C_GP_DAT */ + }; + + /* SMARC I2C_GP as GPIOs */ + pinctrl_lpi2c2_gpio: lpi2c2gpiogrp { + fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2 0x40001b9e>, /* SMARC S48 - I2C_GP_CK */ + <IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3 0x40001b9e>; /* SMARC S49 - I2C_GP_DAT */ + }; + + /* SMARC I2C_PM */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40001b9e>, /* SMARC P122 - I2C_PM_DAT */ + <IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40001b9e>; /* SMARC P121 - I2C_PM_CK */ + }; + + /* SMARC I2C_PM as GPIOs */ + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x40001b9e>, /* SMARC P122 - I2C_PM_DAT */ + <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x40001b9e>; /* SMARC P121 - I2C_PM_CK */ + }; + + /* I2C_SOM */ + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = <IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40001b9e>, /* I2C_SOM_CK */ + <IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40001b9e>; /* I2C_SOM_DAT */ + }; + + /* I2C_SOM as GPIOs */ + pinctrl_lpi2c4_gpio: lpi2c4gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31 0x40001b9e>, /* I2C_SOM_CK */ + <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30 0x40001b9e>; /* I2C_SOM_DAT */ + }; + + /* SMARC I2C_LCD */ + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = <IMX95_PAD_GPIO_IO22__LPI2C5_SDA 0x40001b9e>, /* SMARC S140 - I2C_LCD_DAT */ + <IMX95_PAD_GPIO_IO23__LPI2C5_SCL 0x40001b9e>; /* SMARC S139 - I2C_LCD_CK */ + }; + + /* SMARC I2C_LCD as GPIOs */ + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22 0x40001b9e>, /* SMARC S140 - I2C_LCD_DAT */ + <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23 0x40001b9e>; /* SMARC S139 - I2C_LCD_CK */ + }; + + /* I2C_CAM */ + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = <IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40001b9e>, /* I2C_CAM_DAT */ + <IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x40001b9e>; /* I2C_CAM_CK */ + }; + + /* I2C_CAM as GPIOs */ + pinctrl_lpi2c7_gpio: lpi2c7gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO08__GPIO2_IO_BIT8 0x40001b9e>, /* I2C_CAM_DAT */ + <IMX95_PAD_GPIO_IO09__GPIO2_IO_BIT9 0x40001b9e>; /* I2C_CAM_CK */ + }; + + /* SMARC SPI1 */ + pinctrl_lpspi4: lpspi4grp { + fsl,pins = <IMX95_PAD_GPIO_IO37__LPSPI4_SCK 0x3fe>, /* SMARC P56 - SPI1_CK */ + <IMX95_PAD_GPIO_IO36__LPSPI4_SOUT 0x3fe>, /* SMARC P58 - SPI1_DO */ + <IMX95_PAD_GPIO_IO19__LPSPI4_SIN 0x3fe>, /* SMARC P57 - SPI1_DIN */ + <IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x3fe>, /* SPI1_TPM_CS# */ + <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x3fe>, /* SMARC P54 - SPI1_CS0# */ + <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe>; /* SMARC P55 - SPI1_CS1# */ + }; + + /* SMARC SPI0 */ + pinctrl_lpspi6: lpspi6grp { + fsl,pins = <IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0 0x3fe>, /* SMARC P43 - SPI0_CS0# */ + <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24 0x3fe>, /* SMARC P31 - SPI0_CS1# */ + <IMX95_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe>, /* SMARC P45 - SPI0_DIN */ + <IMX95_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe>, /* SMARC P46 - SPI0_DO */ + <IMX95_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe>; /* SMARC P44 - SPI0_CK */ + }; + + /* SMARC PCIE_A */ + pinctrl_pcie0: pcie0grp { + fsl,pins = <IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x40001b1e>; /* SMARC P78 - PCIE_A_CKREQ# */ + }; + + /* SMARC PCIE_B */ + pinctrl_pcie1: pcie1grp { + fsl,pins = <IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x40001b1e>; /* SMARC P77 - PCIE_B_CKREQ# */ + }; + + /* SMARC I2S0 */ + pinctrl_sai3: sai3grp { + fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x11e>, /* SMARC S38 - I2S0_CK */ + <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x11e>, /* SMARC S41 - I2S0_SDIN */ + <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x11e>, /* SMARC S40 - I2S0_SDOUT */ + <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x11e>; /* SMARC S39 - I2S0_LRCK */ + }; + + /* SMARC AUDIO_MCK */ + pinctrl_sai3_mclk: sai3mclkgrp { + fsl,pins = <IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e>; /* SMARC S42 - AUDIO_MCK */ + }; + + /* SMARC I2S2 */ + pinctrl_sai5: sai5grp { + fsl,pins = <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x11e>, /* SMARC S53 - I2S2_CK */ + <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x11e>, /* SMARC S51 - I2S2_SDOUT */ + <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x11e>, /* SMARC S52 - I2S2_SDIN */ + <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x11e>; /* SMARC S50 - I2S2_LRCK */ + }; + + /* SMARC SMB_ALERT# */ + pinctrl_smb_alert_gpio: smbalertgrp { + fsl,pins = <IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28 0x31e>; /* SMARC P1 - SMB_ALERT# */ + }; + + /* SMARC SER1, used as the Linux Console */ + pinctrl_uart1: uart1grp { + fsl,pins = <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e>, /* SMARC P134 - SER1_TX */ + <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e>; /* SMARC P135 - SER1_RX */ + }; + + /* SMARC SER0 */ + pinctrl_uart2: uart2grp { + fsl,pins = <IMX95_PAD_SAI1_TXC__AONMIX_TOP_LPUART2_CTS_B 0x31e>, /* SMARC P132 - SER0_CTS# */ + <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_LPUART2_RTS_B 0x31e>, /* SMARC P131 - SER0_RTS# */ + <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX 0x31e>, /* SMARC P130 - SER0_RX */ + <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX 0x31e>; /* SMARC P129 - SER0_TX */ + }; + + /* SMARC SER3 */ + pinctrl_uart3: uart3grp { + fsl,pins = <IMX95_PAD_GPIO_IO14__LPUART3_TX 0x31e>, /* SMARC P140 - SER3_TX */ + <IMX95_PAD_GPIO_IO15__LPUART3_RX 0x31e>; /* SMARC P141 - SER3_RX */ + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e>, /* SD1_CLK */ + <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e>, /* SD1_CMD */ + <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e>, /* SD1_DATA0 */ + <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e>, /* SD1_DATA1 */ + <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e>, /* SD1_DATA2 */ + <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e>, /* SD1_DATA3 */ + <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e>, /* SD1_DATA4 */ + <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e>, /* SD1_DATA5 */ + <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e>, /* SD1_DATA6 */ + <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e>, /* SD1_DATA7 */ + <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e>; /* SD1_STROBE */ + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe>, /* SD1_CLK */ + <IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe>, /* SD1_CMD */ + <IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe>, /* SD1_DATA0 */ + <IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe>, /* SD1_DATA1 */ + <IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe>, /* SD1_DATA2 */ + <IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe>, /* SD1_DATA3 */ + <IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe>, /* SD1_DATA4 */ + <IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe>, /* SD1_DATA5 */ + <IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe>, /* SD1_DATA6 */ + <IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe>, /* SD1_DATA7 */ + <IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe>; /* SD1_STROBE */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e>, /* SMARC P36 - SDIO_CK */ + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e>, /* SMARC P34 - SDIO_CMD */ + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e>, /* SMARC P39 - SDIO_D0 */ + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e>, /* SMARC P40 - SDIO_D1 */ + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e>, /* SMARC P41 - SDIO_D2 */ + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e>; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe>, /* SMARC P36 - SDIO_CK */ + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe>, /* SMARC P34 - SDIO_CMD */ + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe>, /* SMARC P39 - SDIO_D0 */ + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe>, /* SMARC P40 - SDIO_D1 */ + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe>, /* SMARC P41 - SDIO_D2 */ + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe>; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK 0x400>, /* SMARC P36 - SDIO_CK */ + <IMX95_PAD_SD2_CMD__USDHC2_CMD 0x400>, /* SMARC P34 - SDIO_CMD */ + <IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x400>, /* SMARC P39 - SDIO_D0 */ + <IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x400>, /* SMARC P40 - SDIO_D1 */ + <IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x400>, /* SMARC P41 - SDIO_D2 */ + <IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x400>; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO_CD# */ + pinctrl_usdhc2_cd: usdhc2-cdgrp { + fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x1100>; /* SMARC P35 - SDIO_CD# */ + }; + + /* SMARC SDIO_PWR_EN */ + pinctrl_usdhc2_pwr_en: usdhc2-pwrengrp { + fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x11e>; /* SMARC P37 - SDIO_PWR_EN */ + }; + + pinctrl_usdhc2_vsel: usdhc2-vselgrp { + fsl,pins = <IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19 0x4>; /* PMIC_SD2_VSEL */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e>, /* SD3_CLK */ + <IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e>, /* SD3_CMD */ + <IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e>, /* SD3_DATA0 */ + <IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e>, /* SD3_DATA1 */ + <IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e>, /* SD3_DATA2 */ + <IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e>; /* SD3_DATA3 */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe>, /* SD3_CLK */ + <IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe>, /* SD3_CMD */ + <IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe>, /* SD3_DATA1 */ + <IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe>, /* SD3_DATA2 */ + <IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe>, /* SD3_DATA3 */ + <IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe>; /* SD3_DATA4 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts index 5b6b2bb80b28..97726eded0f8 100644 --- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts @@ -39,6 +39,8 @@ serial5 = &lpuart6; serial6 = &lpuart7; serial7 = &lpuart8; + spi0 = &flexspi1; + spi1 = &lpspi3; }; chosen { @@ -144,6 +146,13 @@ model = "tqm-tlv320aic32"; audio-codec = <&tlv320aic3x04>; audio-cpu = <&sai3>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; @@ -172,15 +181,11 @@ }; &flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; xceiver-supply = <®_3v3>; status = "okay"; }; &flexcan3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan3>; xceiver-supply = <®_3v3>; status = "okay"; }; @@ -204,15 +209,12 @@ }; &lpspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpspi3>; - cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; }; /* SER0 */ &lpuart1 { - status = "disabled"; + status = "reserved"; }; /* SER3 */ @@ -232,27 +234,11 @@ /* X44 mPCIe */ &pcie0 { - pinctrl-0 = <&pinctrl_pcie0>; - pinctrl-names = "default"; - clocks = <&scmi_clk IMX95_CLK_HSIO>, - <&pcieclk 1>, - <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; - reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>; status = "okay"; }; /* X22 PCIe x1 socket */ &pcie1 { - pinctrl-0 = <&pinctrl_pcie1>; - pinctrl-names = "default"; - clocks = <&scmi_clk IMX95_CLK_HSIO>, - <&pcieclk 0>, - <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; - reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -261,39 +247,9 @@ }; &sai3 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>, - <&scmi_clk IMX95_CLK_AUDIOPLL2>, - <&scmi_clk IMX95_CLK_SAI3>; - assigned-clock-parents = <0>, <0>, <0>, <0>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>; - assigned-clock-rates = <3932160000>, - <3612672000>, <393216000>, - <361267200>, <12288000>; - fsl,sai-mclk-direction-output; status = "okay"; }; -&sai5 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai5>; - assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>, - <&scmi_clk IMX95_CLK_AUDIOPLL2>, - <&scmi_clk IMX95_CLK_SAI5>; - assigned-clock-parents = <0>, <0>, <0>, <0>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>; - assigned-clock-rates = <3932160000>, - <3612672000>, <393216000>, - <361267200>, <12288000>; -}; - /* X4 */ &usb2 { srp-disable; @@ -305,20 +261,9 @@ status = "okay"; }; - /* X16 */ &usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - pinctrl-3 = <&pinctrl_usdhc2>; - vmmc-supply = <®_sdvmmc>; - cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - no-1-8-v; no-mmc; no-sdio; - disable-wp; - bus-width = <4>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi index 180124cc5bce..43418844701b 100644 --- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi @@ -106,16 +106,25 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; +}; + &flexspi1 { - pinctrl-names = "default", "sleep"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi1>; - pinctrl-1 = <&pinctrl_flexspi1>; status = "okay"; flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <66000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; vcc-supply = <®_1v8>; @@ -156,9 +165,8 @@ &lpi2c1 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c1>; - pinctrl-1 = <&pinctrl_lpi2c1>; status = "okay"; tmp1075: temperature-sensor@4a { @@ -195,6 +203,7 @@ eeprom@58 { compatible = "atmel,24c64d-wl"; reg = <0x58>; + pagesize = <32>; vcc-supply = <®_1v8>; }; @@ -202,6 +211,7 @@ eeprom@5c { compatible = "atmel,24c64d-wl"; reg = <0x5c>; + pagesize = <32>; vcc-supply = <®_1v8>; }; @@ -255,9 +265,11 @@ /* I2C_CAM0 */ &lpi2c3 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c3>; - pinctrl-1 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; dp_bridge: dp-bridge@f { @@ -292,21 +304,31 @@ /* I2C_CAM1 */ &lpi2c4 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c4>; - pinctrl-1 = <&pinctrl_lpi2c4>; + pinctrl-1 = <&pinctrl_lpi2c4_gpio>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; /* I2C_LCD */ &lpi2c6 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c6>; - pinctrl-1 = <&pinctrl_lpi2c6>; + pinctrl-1 = <&pinctrl_lpi2c6_gpio>; + sda-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; +&lpspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi3>; + cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>; +}; + /* SER0 */ &lpuart1 { pinctrl-names = "default"; @@ -375,6 +397,63 @@ }; }; +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&pcieclk 1>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + reset-gpios = <&expander2 9 GPIO_ACTIVE_LOW>; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&pcieclk 0>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + reset-gpios = <&expander2 10 GPIO_ACTIVE_LOW>; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; +}; + +&sai5 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI5>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; +}; + &scmi_bbm { linux,code = <KEY_POWER>; }; @@ -425,11 +504,10 @@ }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - pinctrl-3 = <&pinctrl_usdhc1>; bus-width = <8>; non-removable; no-sdio; @@ -437,6 +515,18 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_sdvmmc>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + bus-width = <4>; +}; + &wdog3 { status = "okay"; }; @@ -497,12 +587,12 @@ }; pinctrl_flexspi1: flexspi1grp { - fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x11e>, - <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x11e>, - <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0 0x11e>, - <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1 0x11e>, - <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2 0x11e>, - <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3 0x11e>; + fsl,pins = <IMX95_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x19e>, + <IMX95_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x19e>, + <IMX95_PAD_SD3_DATA0__FLEXSPI1_A_DATA_BIT0 0x19e>, + <IMX95_PAD_SD3_DATA1__FLEXSPI1_A_DATA_BIT1 0x19e>, + <IMX95_PAD_SD3_DATA2__FLEXSPI1_A_DATA_BIT2 0x19e>, + <IMX95_PAD_SD3_DATA3__FLEXSPI1_A_DATA_BIT3 0x19e>; }; pinctrl_gpio1: gpio1grp { @@ -527,14 +617,29 @@ <IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x4000191e>; }; + pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x4000191e>, + <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x4000191e>; + }; + pinctrl_lpi2c4: lpi2c4grp { - fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x4000191e>, - <IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x4000191e>; + fsl,pins = <IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x4000191e>, + <IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x4000191e>; + }; + + pinctrl_lpi2c4_gpio: lpi2c4-gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30 0x4000191e>, + <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31 0x4000191e>; }; pinctrl_lpi2c6: lpi2c6grp { - fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA 0x4000191e>, - <IMX95_PAD_GPIO_IO03__LPI2C6_SCL 0x4000191e>; + fsl,pins = <IMX95_PAD_GPIO_IO02__LPI2C6_SDA 0x4000191e>, + <IMX95_PAD_GPIO_IO03__LPI2C6_SCL 0x4000191e>; + }; + + pinctrl_lpi2c6_gpio: lpi2c6-gpiogrp { + fsl,pins = <IMX95_PAD_GPIO_IO02__GPIO2_IO_BIT2 0x4000191e>, + <IMX95_PAD_GPIO_IO03__GPIO2_IO_BIT3 0x4000191e>; }; pinctrl_lpspi3: lpspi3grp { @@ -617,7 +722,7 @@ fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0 0x51e>; }; - pinctrl_tpm5: tpm4grp { + pinctrl_tpm5: tpm5grp { fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0 0x51e>; }; diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 1292677cbe4e..e45014d50abe 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -250,6 +250,28 @@ clock-output-names = "dummy"; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-hz-real = /bits/ 64 <500000000>; + opp-microvolt = <920000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-hz-real = /bits/ 64 <800000000>; + opp-microvolt = <920000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-hz-real = /bits/ 64 <1000000000>; + opp-microvolt = <920000>; + }; + }; + clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -945,7 +967,7 @@ }; flexspi1: spi@425e0000 { - compatible = "nxp,imx8mm-fspi"; + compatible = "nxp,imx95-fspi", "nxp,imx8mm-fspi"; reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>; reg-names = "fspi_base", "fspi_mmap"; #address-cells = <1>; @@ -1886,7 +1908,7 @@ assigned-clock-rates = <3600000000>, <100000000>, <10000000>; assigned-clock-parents = <0>, <0>, <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; - msi-map = <0x0 &its 0x98 0x1>; + msi-map = <0x0 &its 0x10 0x1>; power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; status = "disabled"; }; @@ -1963,6 +1985,7 @@ assigned-clock-rates = <3600000000>, <100000000>, <10000000>; assigned-clock-parents = <0>, <0>, <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>; + msi-map = <0x0 &its 0x98 0x1>; power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>; status = "disabled"; }; @@ -2138,6 +2161,21 @@ }; }; + gpu: gpu@4d900000 { + compatible = "nxp,imx95-mali", "arm,mali-valhall-csf"; + reg = <0 0x4d900000 0 0x480000>; + clocks = <&scmi_clk IMX95_CLK_GPU>, <&scmi_clk IMX95_CLK_GPUAPB>; + clock-names = "core", "coregroup"; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&scmi_devpd IMX95_PD_GPU>; + #cooling-cells = <2>; + dynamic-power-coefficient = <1013>; + }; + ddr-pmu@4e090dc0 { compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu"; reg = <0x0 0x4e090dc0 0x0 0x200>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 79daba930ad6..225cd2f1220b 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -141,6 +141,13 @@ model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi index c4b5663949ad..f534dab44e8e 100644 --- a/arch/arm64/boot/dts/freescale/mba8xx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi @@ -128,6 +128,13 @@ model = "tqm-tlv320aic32"; audio-codec = <&tlv320aic3x04>; ssi-controller = <&sai1>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index d167624d1f0c..51d00dac12de 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -3,7 +3,7 @@ * NXP S32G2 SoC family * * Copyright (c) 2021 SUSE LLC - * Copyright 2017-2021, 2024 NXP + * Copyright 2017-2021, 2024-2025 NXP */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -727,6 +727,62 @@ status = "disabled"; }; + gmac0: ethernet@4033c000 { + compatible = "nxp,s32g2-dwmac"; + reg = <0x4033c000 0x2000>, /* gmac IP */ + <0x4007c004 0x4>; /* GMAC_0_CTRL_STS */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + status = "disabled"; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + gmac0mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@50800000 { compatible = "arm,gic-v3"; reg = <0x50800000 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts index c4a195dd67bf..aa40a52f8e53 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (c) 2021 SUSE LLC - * Copyright 2019-2021, 2024 NXP + * Copyright 2019-2021, 2024-2025 NXP */ /dts-v1/; @@ -14,6 +14,7 @@ compatible = "nxp,s32g274a-evb", "nxp,s32g2"; aliases { + ethernet0 = &gmac0; serial0 = &uart0; }; @@ -43,3 +44,18 @@ no-1-8-v; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy4>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy4: ethernet-phy@4 { + reg = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts index 4f58be68c818..ee3121b192e5 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -14,6 +14,7 @@ compatible = "nxp,s32g274a-rdb2", "nxp,s32g2"; aliases { + ethernet0 = &gmac0; serial0 = &uart0; serial1 = &uart1; }; @@ -77,3 +78,18 @@ no-1-8-v; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy1>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index be3a582ebc1b..eff7673e7f34 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2024 NXP + * Copyright 2021-2025 NXP * * Authors: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com> * Ciprian Costea <ciprianmarian.costea@nxp.com> @@ -804,6 +804,62 @@ status = "disabled"; }; + gmac0: ethernet@4033c000 { + compatible = "nxp,s32g2-dwmac"; + reg = <0x4033c000 0x2000>, /* gmac IP */ + <0x4007c004 0x4>; /* GMAC_0_CTRL_STS */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + status = "disabled"; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + gmac0mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + swt8: watchdog@40500000 { compatible = "nxp,s32g3-swt", "nxp,s32g2-swt"; reg = <40500000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts index e94f70ad82d9..326322b62192 100644 --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2024 NXP + * Copyright 2021-2025 NXP * * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) */ @@ -15,6 +15,7 @@ compatible = "nxp,s32g399a-rdb3", "nxp,s32g3"; aliases { + ethernet0 = &gmac0; mmc0 = &usdhc0; serial0 = &uart0; serial1 = &uart1; @@ -93,3 +94,18 @@ disable-wp; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy1>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi index 478cc8ede05e..3d20e3bf32ce 100644 --- a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi +++ b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi @@ -98,6 +98,13 @@ model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 33f6d01266b1..a117268267ee 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -2,7 +2,9 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ + socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \ socfpga_n5x_socdk.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index c1e66db0f4c5..0dfbafde8822 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -167,6 +167,7 @@ compatible = "intel,agilex-clkmgr"; reg = <0xffd10000 0x1000>; #clock-cells = <1>; + clocks = <&osc1>; }; gmac0: ethernet@ff800000 { diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file mode 100644 index 000000000000..14b299f19f3a --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex3 SoCDK"; + compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex3", + "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + /delete-node/ cpu@2; + /delete-node/ cpu@3; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac2_phy0>; + max-frame-size = <9000>; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + emac2_phy0: ethernet-phy@0 { + reg = <0>; + rxc-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <0>; + txen-skew-ps = <60>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <60>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <2>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "u-boot"; + reg = <0x0 0x00c00000>; + }; + + root: partition@c00000 { + label = "root"; + reg = <0x00c00000 0x03400000>; + }; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index 04e99cd7e74b..a5c2025a616e 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -37,6 +37,7 @@ reg = <0x0>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -44,6 +45,7 @@ reg = <0x100>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu2: cpu@2 { @@ -51,6 +53,7 @@ reg = <0x200>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu3: cpu@3 { @@ -58,6 +61,30 @@ reg = <0x300>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3>; + cache-unified; + }; + + L3: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + }; + + firmware { + svc { + compatible = "intel,agilex5-svc"; + method = "smc"; + memory-region = <&service_reserved>; + iommus = <&smmu 10>; }; }; @@ -75,8 +102,11 @@ #address-cells = <2>; #size-cells = <2>; interrupt-controller; + interrupt-parent = <&intc>; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; + /* VGIC maintenance interrupt */ + interrupts = <GIC_PPI 25 IRQ_TYPE_LEVEL_HIGH>; its: msi-controller@1d040000 { compatible = "arm,gic-v3-its"; @@ -133,6 +163,12 @@ compatible = "usb-nop-xceiv"; }; + pmu0: pmu { + compatible = "arm,armv8-pmuv3"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + soc: soc@0 { compatible = "simple-bus"; ranges = <0 0 0 0xffffffff>; @@ -203,7 +239,8 @@ }; i3c0: i3c@10da0000 { - compatible = "snps,dw-i3c-master-1.00a"; + compatible = "altr,agilex5-dw-i3c-master", + "snps,dw-i3c-master-1.00a"; reg = <0x10da0000 0x1000>; #address-cells = <3>; #size-cells = <0>; @@ -213,7 +250,8 @@ }; i3c1: i3c@10da1000 { - compatible = "snps,dw-i3c-master-1.00a"; + compatible = "altr,agilex5-dw-i3c-master", + "snps,dw-i3c-master-1.00a"; reg = <0x10da1000 0x1000>; #address-cells = <3>; #size-cells = <0>; @@ -271,7 +309,9 @@ #size-cells = <0>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clkmgr AGILEX5_NAND_NF_CLK>; + clock-names = "nf_clk"; cdns,board-delay-ps = <4830>; + iommus = <&smmu 4>; status = "disabled"; }; @@ -298,6 +338,7 @@ snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; + iommus = <&smmu 8>; }; dmac1: dma-controller@10dc0000 { @@ -315,6 +356,7 @@ snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; + iommus = <&smmu 9>; }; rst: rstmgr@10d11000 { @@ -323,6 +365,18 @@ #reset-cells = <1>; }; + smmu: iommu@16000000 { + compatible = "arm,smmu-v3"; + reg = <0x16000000 0x30000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror", "priq"; + dma-coherent; + #iommu-cells = <1>; + status = "disabled"; + }; + spi0: spi@10da4000 { compatible = "snps,dw-apb-ssi"; reg = <0x10da4000 0x1000>; @@ -423,6 +477,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 6>; clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>; clock-names = "otg"; status = "disabled"; @@ -822,5 +877,61 @@ }; }; }; + + pmu0_tcu: pmu@16002000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16002000 0x1000>, + <0x16022000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu0: pmu@16042000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16042000 0x1000>, + <0x16052000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu1: pmu@16062000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16062000 0x1000>, + <0x16072000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu2: pmu@16082000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16082000 0x1000>, + <0x16092000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu3: pmu@160a2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160A2000 0x1000>, + <0x160B2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu4: pmu@160c2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160C2000 0x1000>, + <0x160D2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; + }; + + pmu0_tbu5: pmu@160e2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160E2000 0x1000>, + <0x160F2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts index e9776e1cdc9a..262bb3e8e5c7 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts @@ -77,6 +77,8 @@ cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts new file mode 100644 index 000000000000..f71e1280c778 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex5 013B SoCDK"; + compatible = "intel,socfpga-agilex5-socdk-013b", "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac2_phy0>; + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + emac2_phy0: ethernet-phy@0 { + reg = <0>; + rxc-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <0>; + txen-skew-ps = <60>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <60>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <2>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "u-boot"; + reg = <0x0 0x00c00000>; + }; + + root: partition@c00000 { + label = "root"; + reg = <0x00c00000 0x03400000>; + }; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts index 38a582ef86b4..ec4541d44c9b 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts @@ -10,6 +10,7 @@ aliases { serial0 = &uart0; + ethernet0 = &gmac0; }; chosen { @@ -36,6 +37,23 @@ }; }; +&gmac0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac0_phy0>; + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + emac0_phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &gpio0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index b31cfa6b802d..9ee312bae8d2 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -116,6 +116,8 @@ cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts index 0f9020bd0c52..98900cb410dc 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -81,7 +81,7 @@ &nand { status = "okay"; - flash@0 { + nand@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 7952c7f47cc2..0034a4897220 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -93,6 +93,8 @@ cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 293403a1a333..df939426d258 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -56,7 +56,7 @@ marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index ee67c70bf02e..fb361d657a77 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -89,7 +89,7 @@ marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13", "mpp12"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 50e9e0724828..3cc320f569ad 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -379,7 +379,7 @@ "mpp27"; marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts index 5cf83d8ca1f5..2507896d58f9 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts +++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts @@ -413,13 +413,7 @@ /* SRDS #0,#1,#2,#3 - PCIe */ &cp0_pcie0 { num-lanes = <4>; - /* - * The mvebu-comphy driver does not currently know how to pass correct - * lane-count to ATF while configuring the serdes lanes. - * Rely on bootloader configuration only. - * - * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; - */ + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; status = "okay"; }; @@ -481,13 +475,7 @@ /* SRDS #0,#1 - PCIe */ &cp1_pcie0 { num-lanes = <2>; - /* - * The mvebu-comphy driver does not currently know how to pass correct - * lane-count to ATF while configuring the serdes lanes. - * Rely on bootloader configuration only. - * - * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; - */ + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts index 47a4f01a7077..b2ce5edd9c6a 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts @@ -10,6 +10,7 @@ aliases { mmc0 = &sdh2; /* eMMC */ mmc1 = &sdh0; /* SD card */ + mmc2 = &sdh1; /* SDIO */ serial0 = &uart0; }; @@ -23,6 +24,7 @@ fb0: framebuffer@17177000 { compatible = "simple-framebuffer"; reg = <0 0x17177000 0 (480 * 800 * 4)>; + power-domains = <&apmu PXA1908_POWER_DOMAIN_DSI>; width = <480>; height = <800>; stride = <(480 * 4)>; @@ -30,46 +32,26 @@ }; }; - /* Bootloader fills this in */ memory@0 { device_type = "memory"; - reg = <0 0 0 0>; + reg = <0 0 0 0x40000000>; }; reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + /* + * Reserved by the vendor bootloader as a "secure region". + * + * TODO: See if the responsible stage of the bootloader can be + * replaced + */ + secure-region@0 { + reg = <0 0 0 0x1000000>; + }; framebuffer@17000000 { reg = <0 0x17000000 0 0x1800000>; no-map; }; - - gpu@9000000 { - reg = <0 0x9000000 0 0x1000000>; - }; - - /* Communications processor, aka modem */ - cp@5000000 { - reg = <0 0x5000000 0 0x3000000>; - }; - - cm3@a000000 { - reg = <0 0xa000000 0 0x80000>; - }; - - seclog@8000000 { - reg = <0 0x8000000 0 0x100000>; - }; - - ramoops@8100000 { - compatible = "ramoops"; - reg = <0 0x8100000 0 0x40000>; - record-size = <0x8000>; - console-size = <0x20000>; - max-reason = <5>; - }; }; i2c-muic { @@ -88,6 +70,12 @@ reg = <0x14>; interrupt-parent = <&gpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; @@ -115,6 +103,21 @@ gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm3 100000>; + enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; + }; }; &smmu { @@ -286,6 +289,151 @@ pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; pinctrl-single,low-power-mode = <0x208 0x388>; }; + + sdh1_pins_0: sdh1-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_1: sdh1-pins-1 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh1_pins_2: sdh1-pins-2 { + pinctrl-single,pins = <0xec 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_0: sdh1-fast-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_1: sdh1-fast-pins-1 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_0: sdh2-pins-0 { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_pins_1: sdh2-pins-1 { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_2: sdh2-pins-2 { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh2_fast_pins_0: sdh2-fast-pins-0 { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_fast_pins_1: sdh2-fast-pins-1 { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_fast_pins_2: sdh2-fast-pins-2 { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + vibrator_pin: vibrator-pin { + pinctrl-single,pins = <0x12c 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>; + pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; }; &uart0 { @@ -303,10 +451,46 @@ &twsi2 { status = "okay"; + + pmic@30 { + compatible = "marvell,88pm886-a1"; + reg = <0x30>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + wakeup-source; + + regulators { + ldo2: ldo2 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <3100000>; + }; + + ldo6: ldo6 { + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + ldo14: ldo14 { + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; }; &twsi3 { status = "okay"; + + touchscreen@50 { + compatible = "imagis,ist3032c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + }; }; &usb { @@ -314,18 +498,33 @@ }; &sdh2 { - /* Disabled for now because initialization fails with -ETIMEDOUT. */ - status = "disabled"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh2_pins_0 &sdh2_pins_1 &sdh2_pins_2>; + pinctrl-1 = <&sdh2_fast_pins_0 &sdh2_fast_pins_1 &sdh2_fast_pins_2>; bus-width = <8>; non-removable; mmc-ddr-1_8v; + mmc-hs200-1_8v; }; &sdh0 { pinctrl-names = "default"; pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>; - cd-gpios = <&gpio 11 0>; - cd-inverted; + cd-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; bus-width = <4>; wp-inverted; + vmmc-supply = <&ldo14>; + vqmmc-supply = <&ldo6>; +}; + +&sdh1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh1_pins_0 &sdh1_pins_1 &sdh1_pins_2>; + pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>; + bus-width = <4>; + non-removable; +}; + +&pwm3 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi index cf2b9109688c..5778bfdb8567 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/marvell,pxa1908.h> +#include <dt-bindings/power/marvell,pxa1908-power.h> / { model = "Marvell Armada PXA1908"; @@ -58,6 +59,20 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@8100000 { + compatible = "ramoops"; + reg = <0 0x8100000 0 0x40000>; + record-size = <0x8000>; + console-size = <0x20000>; + max-reason = <5>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -79,6 +94,7 @@ #iommu-cells = <1>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&apmu PXA1908_POWER_DOMAIN_VPU>; status = "disabled"; }; @@ -195,6 +211,38 @@ }; }; + pwm0: pwm@1a000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a000 0x10>; + clocks = <&apbc PXA1908_CLK_PWM0>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm1: pwm@1a400 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a400 0x10>; + clocks = <&apbc PXA1908_CLK_PWM1>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm2: pwm@1a800 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a800 0x10>; + clocks = <&apbc PXA1908_CLK_PWM2>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm3: pwm@1ac00 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1ac00 0x10>; + clocks = <&apbc PXA1908_CLK_PWM3>; + #pwm-cells = <1>; + status = "disabled"; + }; + pmx: pinmux@1e000 { compatible = "marvell,pxa1908-padconf", "pinconf-single"; reg = <0x1e000 0x330>; @@ -291,9 +339,10 @@ }; apmu: clock-controller@82800 { - compatible = "marvell,pxa1908-apmu"; + compatible = "marvell,pxa1908-apmu", "syscon"; reg = <0x82800 0x400>; #clock-cells = <1>; + #power-domain-cells = <1>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index a4df4c21399e..c5fd6191a925 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -24,6 +24,12 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-4e.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn15.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn18.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-sd.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb @@ -99,8 +105,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-grinn-genio-510-sbc.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk-ufs.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-grinn-genio-700-sbc.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo @@ -111,4 +120,6 @@ DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@ DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@ DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@ DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@ +DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-4e := -@ +DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-8x := -@ DTC_FLAGS_mt8395-radxa-nio-12l := -@ diff --git a/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h new file mode 100644 index 000000000000..4e8e475a7454 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h @@ -0,0 +1,1201 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Light Hsieh <light.hsieh@mediatek.com> + * + * Copyright (C) 2025 Igor Belwon <igor.belwon@mentallysanemainliners.org> + */ + +#ifndef __MT6878_PINFUNC_H +#define __MT6878_PINFUNC_H + +#include "mt65xx.h" + +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 1) +#define PINMUX_GPIO0__FUNC_SRCLKENA1 (MTK_PIN_NO(0) | 2) +#define PINMUX_GPIO0__FUNC_DBG_MON_A3 (MTK_PIN_NO(0) | 7) + +#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 1) +#define PINMUX_GPIO1__FUNC_SRCLKENA1 (MTK_PIN_NO(1) | 2) +#define PINMUX_GPIO1__FUNC_SRCLKENA2 (MTK_PIN_NO(1) | 3) +#define PINMUX_GPIO1__FUNC_IDDIG (MTK_PIN_NO(1) | 5) +#define PINMUX_GPIO1__FUNC_DBG_MON_A4 (MTK_PIN_NO(1) | 7) + +#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 1) +#define PINMUX_GPIO2__FUNC_SRCLKENAI0 (MTK_PIN_NO(2) | 2) +#define PINMUX_GPIO2__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(2) | 4) +#define PINMUX_GPIO2__FUNC_DMIC_CLK (MTK_PIN_NO(2) | 5) +#define PINMUX_GPIO2__FUNC_DBG_MON_A5 (MTK_PIN_NO(2) | 7) + +#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 1) +#define PINMUX_GPIO3__FUNC_SRCLKENAI1 (MTK_PIN_NO(3) | 2) +#define PINMUX_GPIO3__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(3) | 4) +#define PINMUX_GPIO3__FUNC_DMIC_DAT (MTK_PIN_NO(3) | 5) +#define PINMUX_GPIO3__FUNC_DBG_MON_A6 (MTK_PIN_NO(3) | 7) + +#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define PINMUX_GPIO4__FUNC_SPI7_CLK (MTK_PIN_NO(4) | 1) +#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 2) +#define PINMUX_GPIO4__FUNC_ANT_SEL0 (MTK_PIN_NO(4) | 3) +#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 5) +#define PINMUX_GPIO4__FUNC_MD_INT4 (MTK_PIN_NO(4) | 6) +#define PINMUX_GPIO4__FUNC_DBG_MON_A7 (MTK_PIN_NO(4) | 7) + +#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define PINMUX_GPIO5__FUNC_SPI7_CSB (MTK_PIN_NO(5) | 1) +#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 2) +#define PINMUX_GPIO5__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 3) +#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 5) +#define PINMUX_GPIO5__FUNC_MD_INT0 (MTK_PIN_NO(5) | 6) +#define PINMUX_GPIO5__FUNC_DBG_MON_A8 (MTK_PIN_NO(5) | 7) + +#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define PINMUX_GPIO6__FUNC_SPI7_MO (MTK_PIN_NO(6) | 1) +#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 2) +#define PINMUX_GPIO6__FUNC_ANT_SEL2 (MTK_PIN_NO(6) | 3) +#define PINMUX_GPIO6__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(6) | 4) +#define PINMUX_GPIO6__FUNC_MD_INT3 (MTK_PIN_NO(6) | 6) +#define PINMUX_GPIO6__FUNC_DBG_MON_B0 (MTK_PIN_NO(6) | 7) + +#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define PINMUX_GPIO7__FUNC_SPI7_MI (MTK_PIN_NO(7) | 1) +#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 2) +#define PINMUX_GPIO7__FUNC_ANT_SEL3 (MTK_PIN_NO(7) | 3) +#define PINMUX_GPIO7__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(7) | 4) + +#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define PINMUX_GPIO8__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(8) | 2) +#define PINMUX_GPIO8__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 3) +#define PINMUX_GPIO8__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 4) +#define PINMUX_GPIO8__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(8) | 5) +#define PINMUX_GPIO8__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(8) | 6) +#define PINMUX_GPIO8__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(8) | 7) + +#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define PINMUX_GPIO9__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(9) | 2) +#define PINMUX_GPIO9__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 3) +#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 4) +#define PINMUX_GPIO9__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(9) | 5) +#define PINMUX_GPIO9__FUNC_IO_JTAG_TCK (MTK_PIN_NO(9) | 6) +#define PINMUX_GPIO9__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(9) | 7) + +#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define PINMUX_GPIO10__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(10) | 2) +#define PINMUX_GPIO10__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 3) +#define PINMUX_GPIO10__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 4) +#define PINMUX_GPIO10__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(10) | 5) +#define PINMUX_GPIO10__FUNC_IO_JTAG_TMS (MTK_PIN_NO(10) | 6) +#define PINMUX_GPIO10__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(10) | 7) + +#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define PINMUX_GPIO11__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(11) | 2) +#define PINMUX_GPIO11__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 3) +#define PINMUX_GPIO11__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 4) +#define PINMUX_GPIO11__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(11) | 5) +#define PINMUX_GPIO11__FUNC_IO_JTAG_TDI (MTK_PIN_NO(11) | 6) +#define PINMUX_GPIO11__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(11) | 7) + +#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define PINMUX_GPIO12__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(12) | 2) +#define PINMUX_GPIO12__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 3) +#define PINMUX_GPIO12__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 4) +#define PINMUX_GPIO12__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(12) | 5) +#define PINMUX_GPIO12__FUNC_IO_JTAG_TDO (MTK_PIN_NO(12) | 6) +#define PINMUX_GPIO12__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(12) | 7) + +#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define PINMUX_GPIO13__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(13) | 1) +#define PINMUX_GPIO13__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(13) | 2) +#define PINMUX_GPIO13__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(13) | 3) +#define PINMUX_GPIO13__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(13) | 5) +#define PINMUX_GPIO13__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(13) | 6) + +#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define PINMUX_GPIO14__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(14) | 1) +#define PINMUX_GPIO14__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(14) | 2) +#define PINMUX_GPIO14__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(14) | 3) +#define PINMUX_GPIO14__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(14) | 5) +#define PINMUX_GPIO14__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(14) | 6) + +#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define PINMUX_GPIO15__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(15) | 1) +#define PINMUX_GPIO15__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(15) | 2) +#define PINMUX_GPIO15__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(15) | 3) +#define PINMUX_GPIO15__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(15) | 5) +#define PINMUX_GPIO15__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(15) | 6) + +#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define PINMUX_GPIO16__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(16) | 1) +#define PINMUX_GPIO16__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(16) | 2) +#define PINMUX_GPIO16__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(16) | 3) +#define PINMUX_GPIO16__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(16) | 5) +#define PINMUX_GPIO16__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(16) | 6) + +#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define PINMUX_GPIO17__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(17) | 1) +#define PINMUX_GPIO17__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(17) | 2) +#define PINMUX_GPIO17__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(17) | 3) +#define PINMUX_GPIO17__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(17) | 5) +#define PINMUX_GPIO17__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(17) | 6) + +#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define PINMUX_GPIO18__FUNC_CONN_BT_TXD (MTK_PIN_NO(18) | 2) +#define PINMUX_GPIO18__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(18) | 3) +#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 6) + +#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define PINMUX_GPIO19__FUNC_PWM_0 (MTK_PIN_NO(19) | 1) +#define PINMUX_GPIO19__FUNC_SDA10 (MTK_PIN_NO(19) | 3) +#define PINMUX_GPIO19__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(19) | 4) +#define PINMUX_GPIO19__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(19) | 5) +#define PINMUX_GPIO19__FUNC_DBG_MON_A9 (MTK_PIN_NO(19) | 7) + +#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define PINMUX_GPIO20__FUNC_PWM_1 (MTK_PIN_NO(20) | 1) +#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2) +#define PINMUX_GPIO20__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(20) | 4) +#define PINMUX_GPIO20__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(20) | 6) +#define PINMUX_GPIO20__FUNC_DBG_MON_A10 (MTK_PIN_NO(20) | 7) + +#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define PINMUX_GPIO21__FUNC_PWM_2 (MTK_PIN_NO(21) | 1) +#define PINMUX_GPIO21__FUNC_SPI4_CSB (MTK_PIN_NO(21) | 2) +#define PINMUX_GPIO21__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(21) | 4) +#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 5) +#define PINMUX_GPIO21__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(21) | 6) +#define PINMUX_GPIO21__FUNC_DBG_MON_A11 (MTK_PIN_NO(21) | 7) + +#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define PINMUX_GPIO22__FUNC_PWM_3 (MTK_PIN_NO(22) | 1) +#define PINMUX_GPIO22__FUNC_SPI4_MO (MTK_PIN_NO(22) | 2) +#define PINMUX_GPIO22__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 4) +#define PINMUX_GPIO22__FUNC_VBUSVALID (MTK_PIN_NO(22) | 5) +#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 6) +#define PINMUX_GPIO22__FUNC_DBG_MON_A12 (MTK_PIN_NO(22) | 7) + +#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define PINMUX_GPIO23__FUNC_SPI4_MI (MTK_PIN_NO(23) | 2) +#define PINMUX_GPIO23__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(23) | 4) +#define PINMUX_GPIO23__FUNC_USB_DRVVBUS (MTK_PIN_NO(23) | 5) +#define PINMUX_GPIO23__FUNC_DAP_MD32_SWD (MTK_PIN_NO(23) | 6) +#define PINMUX_GPIO23__FUNC_DBG_MON_A13 (MTK_PIN_NO(23) | 7) + +#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define PINMUX_GPIO24__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(24) | 1) +#define PINMUX_GPIO24__FUNC_SCL12 (MTK_PIN_NO(24) | 2) +#define PINMUX_GPIO24__FUNC_SCL10 (MTK_PIN_NO(24) | 3) +#define PINMUX_GPIO24__FUNC_CMVREF0 (MTK_PIN_NO(24) | 4) +#define PINMUX_GPIO24__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(24) | 5) +#define PINMUX_GPIO24__FUNC_CMFLASH0 (MTK_PIN_NO(24) | 6) +#define PINMUX_GPIO24__FUNC_DBG_MON_A14 (MTK_PIN_NO(24) | 7) + +#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define PINMUX_GPIO25__FUNC_SPI6_CLK (MTK_PIN_NO(25) | 1) +#define PINMUX_GPIO25__FUNC_SCL11 (MTK_PIN_NO(25) | 2) +#define PINMUX_GPIO25__FUNC_CMVREF1 (MTK_PIN_NO(25) | 4) +#define PINMUX_GPIO25__FUNC_CMFLASH1 (MTK_PIN_NO(25) | 6) +#define PINMUX_GPIO25__FUNC_DBG_MON_A15 (MTK_PIN_NO(25) | 7) + +#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define PINMUX_GPIO26__FUNC_SPI6_CSB (MTK_PIN_NO(26) | 1) +#define PINMUX_GPIO26__FUNC_SDA11 (MTK_PIN_NO(26) | 2) +#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3) +#define PINMUX_GPIO26__FUNC_CMVREF2 (MTK_PIN_NO(26) | 4) +#define PINMUX_GPIO26__FUNC_CMFLASH2 (MTK_PIN_NO(26) | 6) +#define PINMUX_GPIO26__FUNC_DBG_MON_A16 (MTK_PIN_NO(26) | 7) + +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define PINMUX_GPIO27__FUNC_SPI6_MO (MTK_PIN_NO(27) | 1) +#define PINMUX_GPIO27__FUNC_VBUSVALID (MTK_PIN_NO(27) | 3) +#define PINMUX_GPIO27__FUNC_CMVREF3 (MTK_PIN_NO(27) | 4) +#define PINMUX_GPIO27__FUNC_DMIC1_CLK (MTK_PIN_NO(27) | 5) +#define PINMUX_GPIO27__FUNC_CMFLASH3 (MTK_PIN_NO(27) | 6) +#define PINMUX_GPIO27__FUNC_DBG_MON_A17 (MTK_PIN_NO(27) | 7) + +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define PINMUX_GPIO28__FUNC_SPI6_MI (MTK_PIN_NO(28) | 1) +#define PINMUX_GPIO28__FUNC_IDDIG (MTK_PIN_NO(28) | 3) +#define PINMUX_GPIO28__FUNC_DMIC1_DAT (MTK_PIN_NO(28) | 5) +#define PINMUX_GPIO28__FUNC_CMFLASH0 (MTK_PIN_NO(28) | 6) +#define PINMUX_GPIO28__FUNC_DBG_MON_A18 (MTK_PIN_NO(28) | 7) + +#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define PINMUX_GPIO29__FUNC_I2SIN2_BCK (MTK_PIN_NO(29) | 1) +#define PINMUX_GPIO29__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(29) | 2) +#define PINMUX_GPIO29__FUNC_MD_UTXD0 (MTK_PIN_NO(29) | 3) +#define PINMUX_GPIO29__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(29) | 4) +#define PINMUX_GPIO29__FUNC_MD32_1_TXD (MTK_PIN_NO(29) | 5) +#define PINMUX_GPIO29__FUNC_CONN_BT_TXD (MTK_PIN_NO(29) | 6) +#define PINMUX_GPIO29__FUNC_PTA_TXD (MTK_PIN_NO(29) | 7) + +#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define PINMUX_GPIO30__FUNC_I2SIN2_LRCK (MTK_PIN_NO(30) | 1) +#define PINMUX_GPIO30__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(30) | 2) +#define PINMUX_GPIO30__FUNC_MD_URXD0 (MTK_PIN_NO(30) | 3) +#define PINMUX_GPIO30__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(30) | 4) +#define PINMUX_GPIO30__FUNC_MD32_1_RXD (MTK_PIN_NO(30) | 5) +#define PINMUX_GPIO30__FUNC_PTA_RXD (MTK_PIN_NO(30) | 7) + +#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define PINMUX_GPIO31__FUNC_I2SOUT2_DO (MTK_PIN_NO(31) | 1) +#define PINMUX_GPIO31__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(31) | 2) +#define PINMUX_GPIO31__FUNC_MD_UTXD1 (MTK_PIN_NO(31) | 3) +#define PINMUX_GPIO31__FUNC_HFRP_UTXD1 (MTK_PIN_NO(31) | 4) +#define PINMUX_GPIO31__FUNC_MD32_0_TXD (MTK_PIN_NO(31) | 5) +#define PINMUX_GPIO31__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(31) | 6) +#define PINMUX_GPIO31__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(31) | 7) + +#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define PINMUX_GPIO32__FUNC_I2SIN2_DI (MTK_PIN_NO(32) | 1) +#define PINMUX_GPIO32__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(32) | 2) +#define PINMUX_GPIO32__FUNC_MD_URXD1 (MTK_PIN_NO(32) | 3) +#define PINMUX_GPIO32__FUNC_HFRP_URXD1 (MTK_PIN_NO(32) | 4) +#define PINMUX_GPIO32__FUNC_MD32_0_RXD (MTK_PIN_NO(32) | 5) +#define PINMUX_GPIO32__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(32) | 7) + +#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define PINMUX_GPIO33__FUNC_ANT_SEL0 (MTK_PIN_NO(33) | 1) +#define PINMUX_GPIO33__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(33) | 3) +#define PINMUX_GPIO33__FUNC_SCL1 (MTK_PIN_NO(33) | 4) +#define PINMUX_GPIO33__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(33) | 5) +#define PINMUX_GPIO33__FUNC_MD_UCTS0 (MTK_PIN_NO(33) | 6) + +#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define PINMUX_GPIO34__FUNC_ANT_SEL1 (MTK_PIN_NO(34) | 1) +#define PINMUX_GPIO34__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(34) | 3) +#define PINMUX_GPIO34__FUNC_SDA1 (MTK_PIN_NO(34) | 4) +#define PINMUX_GPIO34__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(34) | 5) +#define PINMUX_GPIO34__FUNC_MD_URTS0 (MTK_PIN_NO(34) | 6) + +#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define PINMUX_GPIO35__FUNC_ANT_SEL2 (MTK_PIN_NO(35) | 1) +#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(35) | 2) +#define PINMUX_GPIO35__FUNC_UDI_TCK (MTK_PIN_NO(35) | 3) +#define PINMUX_GPIO35__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(35) | 5) +#define PINMUX_GPIO35__FUNC_MD_UCTS1 (MTK_PIN_NO(35) | 6) + +#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define PINMUX_GPIO36__FUNC_ANT_SEL3 (MTK_PIN_NO(36) | 1) +#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(36) | 2) +#define PINMUX_GPIO36__FUNC_UDI_NTRST (MTK_PIN_NO(36) | 3) +#define PINMUX_GPIO36__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(36) | 5) +#define PINMUX_GPIO36__FUNC_MD_URTS1 (MTK_PIN_NO(36) | 6) + +#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define PINMUX_GPIO37__FUNC_ANT_SEL4 (MTK_PIN_NO(37) | 1) +#define PINMUX_GPIO37__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(37) | 2) +#define PINMUX_GPIO37__FUNC_UDI_TDI (MTK_PIN_NO(37) | 3) +#define PINMUX_GPIO37__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(37) | 6) + +#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define PINMUX_GPIO38__FUNC_ANT_SEL5 (MTK_PIN_NO(38) | 1) +#define PINMUX_GPIO38__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(38) | 2) +#define PINMUX_GPIO38__FUNC_UDI_TMS (MTK_PIN_NO(38) | 3) +#define PINMUX_GPIO38__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(38) | 6) + +#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define PINMUX_GPIO39__FUNC_ANT_SEL6 (MTK_PIN_NO(39) | 1) +#define PINMUX_GPIO39__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(39) | 2) +#define PINMUX_GPIO39__FUNC_UDI_TDO (MTK_PIN_NO(39) | 3) +#define PINMUX_GPIO39__FUNC_CLKM3 (MTK_PIN_NO(39) | 5) + +#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define PINMUX_GPIO40__FUNC_ANT_SEL7 (MTK_PIN_NO(40) | 1) +#define PINMUX_GPIO40__FUNC_PMSR_SMAP (MTK_PIN_NO(40) | 2) +#define PINMUX_GPIO40__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(40) | 3) +#define PINMUX_GPIO40__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(40) | 4) +#define PINMUX_GPIO40__FUNC_GPS_PPS (MTK_PIN_NO(40) | 5) + +#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define PINMUX_GPIO41__FUNC_I2SIN1_MCK (MTK_PIN_NO(41) | 1) +#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 2) +#define PINMUX_GPIO41__FUNC_GPS_PPS (MTK_PIN_NO(41) | 3) +#define PINMUX_GPIO41__FUNC_HFRP_UCTS1 (MTK_PIN_NO(41) | 4) +#define PINMUX_GPIO41__FUNC_TP_UCTS2_VCORE (MTK_PIN_NO(41) | 5) +#define PINMUX_GPIO41__FUNC_ANT_SEL8 (MTK_PIN_NO(41) | 6) +#define PINMUX_GPIO41__FUNC_DBG_MON_B1 (MTK_PIN_NO(41) | 7) + +#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define PINMUX_GPIO42__FUNC_I2SIN1_BCK (MTK_PIN_NO(42) | 1) +#define PINMUX_GPIO42__FUNC_I2SIN4_BCK (MTK_PIN_NO(42) | 2) +#define PINMUX_GPIO42__FUNC_HFRP_URTS1 (MTK_PIN_NO(42) | 4) +#define PINMUX_GPIO42__FUNC_TP_URTS2_VCORE (MTK_PIN_NO(42) | 5) +#define PINMUX_GPIO42__FUNC_ANT_SEL9 (MTK_PIN_NO(42) | 6) +#define PINMUX_GPIO42__FUNC_DBG_MON_B2 (MTK_PIN_NO(42) | 7) + +#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define PINMUX_GPIO43__FUNC_I2SIN1_LRCK (MTK_PIN_NO(43) | 1) +#define PINMUX_GPIO43__FUNC_I2SIN4_LRCK (MTK_PIN_NO(43) | 2) +#define PINMUX_GPIO43__FUNC_ANT_SEL10 (MTK_PIN_NO(43) | 6) +#define PINMUX_GPIO43__FUNC_DBG_MON_B3 (MTK_PIN_NO(43) | 7) + +#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define PINMUX_GPIO44__FUNC_I2SOUT1_DO (MTK_PIN_NO(44) | 1) +#define PINMUX_GPIO44__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(44) | 2) +#define PINMUX_GPIO44__FUNC_ANT_SEL11 (MTK_PIN_NO(44) | 6) +#define PINMUX_GPIO44__FUNC_DBG_MON_B4 (MTK_PIN_NO(44) | 7) + +#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define PINMUX_GPIO45__FUNC_I2SIN1_DI (MTK_PIN_NO(45) | 1) +#define PINMUX_GPIO45__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(45) | 2) +#define PINMUX_GPIO45__FUNC_AGPS_SYNC (MTK_PIN_NO(45) | 5) +#define PINMUX_GPIO45__FUNC_ANT_SEL12 (MTK_PIN_NO(45) | 6) +#define PINMUX_GPIO45__FUNC_DBG_MON_B5 (MTK_PIN_NO(45) | 7) + +#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define PINMUX_GPIO46__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(46) | 1) +#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 2) +#define PINMUX_GPIO46__FUNC_SRCLKENAI0 (MTK_PIN_NO(46) | 3) +#define PINMUX_GPIO46__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(46) | 5) +#define PINMUX_GPIO46__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(46) | 6) +#define PINMUX_GPIO46__FUNC_DBG_MON_B6 (MTK_PIN_NO(46) | 7) + +#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define PINMUX_GPIO47__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(47) | 1) +#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 2) +#define PINMUX_GPIO47__FUNC_SRCLKENAI1 (MTK_PIN_NO(47) | 3) +#define PINMUX_GPIO47__FUNC_SRCLKENA1 (MTK_PIN_NO(47) | 4) +#define PINMUX_GPIO47__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(47) | 5) +#define PINMUX_GPIO47__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(47) | 6) +#define PINMUX_GPIO47__FUNC_DBG_MON_B7 (MTK_PIN_NO(47) | 7) + +#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define PINMUX_GPIO48__FUNC_UTXD0 (MTK_PIN_NO(48) | 1) +#define PINMUX_GPIO48__FUNC_MD_UTXD1 (MTK_PIN_NO(48) | 3) +#define PINMUX_GPIO48__FUNC_HFRP_UTXD1 (MTK_PIN_NO(48) | 4) +#define PINMUX_GPIO48__FUNC_MD32_0_TXD (MTK_PIN_NO(48) | 5) + +#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define PINMUX_GPIO49__FUNC_URXD0 (MTK_PIN_NO(49) | 1) +#define PINMUX_GPIO49__FUNC_MD_URXD1 (MTK_PIN_NO(49) | 3) +#define PINMUX_GPIO49__FUNC_HFRP_URXD1 (MTK_PIN_NO(49) | 4) +#define PINMUX_GPIO49__FUNC_MD32_0_RXD (MTK_PIN_NO(49) | 5) + +#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define PINMUX_GPIO50__FUNC_MD_UTXD0 (MTK_PIN_NO(50) | 1) +#define PINMUX_GPIO50__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(50) | 2) +#define PINMUX_GPIO50__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(50) | 3) +#define PINMUX_GPIO50__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(50) | 4) +#define PINMUX_GPIO50__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(50) | 5) +#define PINMUX_GPIO50__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(50) | 6) +#define PINMUX_GPIO50__FUNC_UTXD1 (MTK_PIN_NO(50) | 7) + +#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define PINMUX_GPIO51__FUNC_MD_URXD0 (MTK_PIN_NO(51) | 1) +#define PINMUX_GPIO51__FUNC_TP_URXD1_VLP (MTK_PIN_NO(51) | 2) +#define PINMUX_GPIO51__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(51) | 3) +#define PINMUX_GPIO51__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(51) | 4) +#define PINMUX_GPIO51__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(51) | 5) +#define PINMUX_GPIO51__FUNC_TP_URXD2_VLP (MTK_PIN_NO(51) | 6) +#define PINMUX_GPIO51__FUNC_URXD1 (MTK_PIN_NO(51) | 7) + +#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define PINMUX_GPIO52__FUNC_KPROW0 (MTK_PIN_NO(52) | 1) +#define PINMUX_GPIO52__FUNC_CMFLASH0 (MTK_PIN_NO(52) | 2) +#define PINMUX_GPIO52__FUNC_SDA12 (MTK_PIN_NO(52) | 3) +#define PINMUX_GPIO52__FUNC_DSI_TE1 (MTK_PIN_NO(52) | 4) + +#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define PINMUX_GPIO53__FUNC_KPROW1 (MTK_PIN_NO(53) | 1) +#define PINMUX_GPIO53__FUNC_CMFLASH1 (MTK_PIN_NO(53) | 2) +#define PINMUX_GPIO53__FUNC_SCL12 (MTK_PIN_NO(53) | 3) +#define PINMUX_GPIO53__FUNC_LCM_RST1 (MTK_PIN_NO(53) | 4) +#define PINMUX_GPIO53__FUNC_EXTIF0_ACT (MTK_PIN_NO(53) | 6) + +#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define PINMUX_GPIO54__FUNC_KPCOL0_VLP (MTK_PIN_NO(54) | 1) +#define PINMUX_GPIO54__FUNC_KPCOL0_VLP_A (MTK_PIN_NO(54) | 7) + +#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define PINMUX_GPIO55__FUNC_KPCOL1 (MTK_PIN_NO(55) | 1) +#define PINMUX_GPIO55__FUNC_SDA12 (MTK_PIN_NO(55) | 3) +#define PINMUX_GPIO55__FUNC_DISP_PWM1 (MTK_PIN_NO(55) | 4) +#define PINMUX_GPIO55__FUNC_JTRSTN_SEL1_VCORE (MTK_PIN_NO(55) | 7) + +#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define PINMUX_GPIO56__FUNC_SPI0_CLK (MTK_PIN_NO(56) | 1) +#define PINMUX_GPIO56__FUNC_JTCK_SEL1_VCORE (MTK_PIN_NO(56) | 7) + +#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define PINMUX_GPIO57__FUNC_SPI0_CSB (MTK_PIN_NO(57) | 1) +#define PINMUX_GPIO57__FUNC_JTMS_SEL1_VCORE (MTK_PIN_NO(57) | 7) + +#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define PINMUX_GPIO58__FUNC_SPI0_MO (MTK_PIN_NO(58) | 1) +#define PINMUX_GPIO58__FUNC_JTDO_SEL1_VCORE (MTK_PIN_NO(58) | 7) + +#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define PINMUX_GPIO59__FUNC_SPI0_MI (MTK_PIN_NO(59) | 1) +#define PINMUX_GPIO59__FUNC_JTDI_SEL1_VCORE (MTK_PIN_NO(59) | 7) + +#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define PINMUX_GPIO60__FUNC_SCP_SPI1_CK (MTK_PIN_NO(60) | 1) +#define PINMUX_GPIO60__FUNC_SPI1_CLK (MTK_PIN_NO(60) | 2) +#define PINMUX_GPIO60__FUNC_SCP_SCL3 (MTK_PIN_NO(60) | 4) +#define PINMUX_GPIO60__FUNC_TP_GPIO0_AO (MTK_PIN_NO(60) | 5) +#define PINMUX_GPIO60__FUNC_UTXD0 (MTK_PIN_NO(60) | 6) +#define PINMUX_GPIO60__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(60) | 7) + +#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define PINMUX_GPIO61__FUNC_SCP_SPI1_CS (MTK_PIN_NO(61) | 1) +#define PINMUX_GPIO61__FUNC_SPI1_CSB (MTK_PIN_NO(61) | 2) +#define PINMUX_GPIO61__FUNC_TP_GPIO1_AO (MTK_PIN_NO(61) | 5) +#define PINMUX_GPIO61__FUNC_URXD0 (MTK_PIN_NO(61) | 6) +#define PINMUX_GPIO61__FUNC_TP_URXD2_VLP (MTK_PIN_NO(61) | 7) + +#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define PINMUX_GPIO62__FUNC_SCP_SPI1_MO (MTK_PIN_NO(62) | 1) +#define PINMUX_GPIO62__FUNC_SPI1_MO (MTK_PIN_NO(62) | 2) +#define PINMUX_GPIO62__FUNC_SCP_SCL3 (MTK_PIN_NO(62) | 3) +#define PINMUX_GPIO62__FUNC_SCP_SDA3 (MTK_PIN_NO(62) | 4) +#define PINMUX_GPIO62__FUNC_TP_GPIO2_AO (MTK_PIN_NO(62) | 5) +#define PINMUX_GPIO62__FUNC_DBG_MON_B29 (MTK_PIN_NO(62) | 7) + +#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define PINMUX_GPIO63__FUNC_SCP_SPI1_MI (MTK_PIN_NO(63) | 1) +#define PINMUX_GPIO63__FUNC_SPI1_MI (MTK_PIN_NO(63) | 2) +#define PINMUX_GPIO63__FUNC_SCP_SDA3 (MTK_PIN_NO(63) | 3) +#define PINMUX_GPIO63__FUNC_TP_GPIO3_AO (MTK_PIN_NO(63) | 5) +#define PINMUX_GPIO63__FUNC_DBG_MON_B30 (MTK_PIN_NO(63) | 7) + +#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define PINMUX_GPIO64__FUNC_SCP_SPI2_CK (MTK_PIN_NO(64) | 1) +#define PINMUX_GPIO64__FUNC_SPI2_CLK (MTK_PIN_NO(64) | 2) +#define PINMUX_GPIO64__FUNC_SCP_SCL2 (MTK_PIN_NO(64) | 4) +#define PINMUX_GPIO64__FUNC_TP_GPIO4_AO (MTK_PIN_NO(64) | 5) + +#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define PINMUX_GPIO65__FUNC_SCP_SPI2_CS (MTK_PIN_NO(65) | 1) +#define PINMUX_GPIO65__FUNC_SPI2_CSB (MTK_PIN_NO(65) | 2) +#define PINMUX_GPIO65__FUNC_TP_GPIO5_AO (MTK_PIN_NO(65) | 5) +#define PINMUX_GPIO65__FUNC_DBG_MON_B31 (MTK_PIN_NO(65) | 7) + +#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define PINMUX_GPIO66__FUNC_SCP_SPI2_MO (MTK_PIN_NO(66) | 1) +#define PINMUX_GPIO66__FUNC_SPI2_MO (MTK_PIN_NO(66) | 2) +#define PINMUX_GPIO66__FUNC_SCP_SCL2 (MTK_PIN_NO(66) | 3) +#define PINMUX_GPIO66__FUNC_SCP_SDA2 (MTK_PIN_NO(66) | 4) +#define PINMUX_GPIO66__FUNC_TP_GPIO6_AO (MTK_PIN_NO(66) | 5) + +#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define PINMUX_GPIO67__FUNC_SCP_SPI2_MI (MTK_PIN_NO(67) | 1) +#define PINMUX_GPIO67__FUNC_SPI2_MI (MTK_PIN_NO(67) | 2) +#define PINMUX_GPIO67__FUNC_SCP_SDA2 (MTK_PIN_NO(67) | 3) +#define PINMUX_GPIO67__FUNC_TP_GPIO7_AO (MTK_PIN_NO(67) | 5) + +#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define PINMUX_GPIO68__FUNC_SCP_SPI3_CK (MTK_PIN_NO(68) | 1) +#define PINMUX_GPIO68__FUNC_SPI3_CLK (MTK_PIN_NO(68) | 2) +#define PINMUX_GPIO68__FUNC_MD_INT4 (MTK_PIN_NO(68) | 3) +#define PINMUX_GPIO68__FUNC_SCP_SCL4 (MTK_PIN_NO(68) | 4) +#define PINMUX_GPIO68__FUNC_TP_GPIO8_AO (MTK_PIN_NO(68) | 5) +#define PINMUX_GPIO68__FUNC_DBG_MON_A19 (MTK_PIN_NO(68) | 7) + +#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define PINMUX_GPIO69__FUNC_SCP_SPI3_CS (MTK_PIN_NO(69) | 1) +#define PINMUX_GPIO69__FUNC_SPI3_CSB (MTK_PIN_NO(69) | 2) +#define PINMUX_GPIO69__FUNC_MD_INT3 (MTK_PIN_NO(69) | 3) +#define PINMUX_GPIO69__FUNC_TP_GPIO9_AO (MTK_PIN_NO(69) | 5) +#define PINMUX_GPIO69__FUNC_DBG_MON_A20 (MTK_PIN_NO(69) | 7) + +#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define PINMUX_GPIO70__FUNC_SCP_SPI3_MO (MTK_PIN_NO(70) | 1) +#define PINMUX_GPIO70__FUNC_SPI3_MO (MTK_PIN_NO(70) | 2) +#define PINMUX_GPIO70__FUNC_SCP_SCL4 (MTK_PIN_NO(70) | 3) +#define PINMUX_GPIO70__FUNC_SCP_SDA4 (MTK_PIN_NO(70) | 4) +#define PINMUX_GPIO70__FUNC_TP_GPIO10_AO (MTK_PIN_NO(70) | 5) +#define PINMUX_GPIO70__FUNC_DBG_MON_A21 (MTK_PIN_NO(70) | 7) + +#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define PINMUX_GPIO71__FUNC_SCP_SPI3_MI (MTK_PIN_NO(71) | 1) +#define PINMUX_GPIO71__FUNC_SPI3_MI (MTK_PIN_NO(71) | 2) +#define PINMUX_GPIO71__FUNC_SCP_SDA4 (MTK_PIN_NO(71) | 3) +#define PINMUX_GPIO71__FUNC_MD_INT0 (MTK_PIN_NO(71) | 4) +#define PINMUX_GPIO71__FUNC_TP_GPIO11_AO (MTK_PIN_NO(71) | 5) +#define PINMUX_GPIO71__FUNC_DBG_MON_A22 (MTK_PIN_NO(71) | 7) + +#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define PINMUX_GPIO72__FUNC_SPI5_CLK (MTK_PIN_NO(72) | 1) +#define PINMUX_GPIO72__FUNC_SCP_SPI0_CK (MTK_PIN_NO(72) | 2) +#define PINMUX_GPIO72__FUNC_UCTS2 (MTK_PIN_NO(72) | 3) +#define PINMUX_GPIO72__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(72) | 4) +#define PINMUX_GPIO72__FUNC_TP_GPIO12_AO (MTK_PIN_NO(72) | 5) +#define PINMUX_GPIO72__FUNC_EXTIF0_ACT (MTK_PIN_NO(72) | 6) +#define PINMUX_GPIO72__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(72) | 7) + +#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define PINMUX_GPIO73__FUNC_SPI5_CSB (MTK_PIN_NO(73) | 1) +#define PINMUX_GPIO73__FUNC_SCP_SPI0_CS (MTK_PIN_NO(73) | 2) +#define PINMUX_GPIO73__FUNC_URTS2 (MTK_PIN_NO(73) | 3) +#define PINMUX_GPIO73__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(73) | 4) +#define PINMUX_GPIO73__FUNC_TP_GPIO13_AO (MTK_PIN_NO(73) | 5) +#define PINMUX_GPIO73__FUNC_EXTIF0_PRI (MTK_PIN_NO(73) | 6) +#define PINMUX_GPIO73__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(73) | 7) + +#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define PINMUX_GPIO74__FUNC_SPI5_MO (MTK_PIN_NO(74) | 1) +#define PINMUX_GPIO74__FUNC_SCP_SPI0_MO (MTK_PIN_NO(74) | 2) +#define PINMUX_GPIO74__FUNC_UTXD2 (MTK_PIN_NO(74) | 3) +#define PINMUX_GPIO74__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(74) | 4) +#define PINMUX_GPIO74__FUNC_TP_GPIO14_AO (MTK_PIN_NO(74) | 5) +#define PINMUX_GPIO74__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(74) | 6) +#define PINMUX_GPIO74__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(74) | 7) + +#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define PINMUX_GPIO75__FUNC_SPI5_MI (MTK_PIN_NO(75) | 1) +#define PINMUX_GPIO75__FUNC_SCP_SPI0_MI (MTK_PIN_NO(75) | 2) +#define PINMUX_GPIO75__FUNC_URXD2 (MTK_PIN_NO(75) | 3) +#define PINMUX_GPIO75__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(75) | 4) +#define PINMUX_GPIO75__FUNC_TP_GPIO15_AO (MTK_PIN_NO(75) | 5) +#define PINMUX_GPIO75__FUNC_DAP_MD32_SWD (MTK_PIN_NO(75) | 7) + +#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define PINMUX_GPIO76__FUNC_AP_GOOD (MTK_PIN_NO(76) | 1) +#define PINMUX_GPIO76__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(76) | 3) +#define PINMUX_GPIO76__FUNC_GPS_PPS (MTK_PIN_NO(76) | 4) +#define PINMUX_GPIO76__FUNC_PMSR_SMAP (MTK_PIN_NO(76) | 5) +#define PINMUX_GPIO76__FUNC_AGPS_SYNC (MTK_PIN_NO(76) | 6) + +#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define PINMUX_GPIO77__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1) +#define PINMUX_GPIO77__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(77) | 2) +#define PINMUX_GPIO77__FUNC_UDI_TCK (MTK_PIN_NO(77) | 3) +#define PINMUX_GPIO77__FUNC_CONN_DSP_JCK (MTK_PIN_NO(77) | 4) +#define PINMUX_GPIO77__FUNC_TSFDC_EN (MTK_PIN_NO(77) | 6) +#define PINMUX_GPIO77__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(77) | 7) + +#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define PINMUX_GPIO78__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1) +#define PINMUX_GPIO78__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(78) | 2) +#define PINMUX_GPIO78__FUNC_UDI_TMS (MTK_PIN_NO(78) | 3) +#define PINMUX_GPIO78__FUNC_CONN_DSP_JMS (MTK_PIN_NO(78) | 4) +#define PINMUX_GPIO78__FUNC_TSFDC_VCO_RST (MTK_PIN_NO(78) | 6) +#define PINMUX_GPIO78__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(78) | 7) + +#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define PINMUX_GPIO79__FUNC_MSDC1_DAT0 (MTK_PIN_NO(79) | 1) +#define PINMUX_GPIO79__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(79) | 2) +#define PINMUX_GPIO79__FUNC_UDI_TDI (MTK_PIN_NO(79) | 3) +#define PINMUX_GPIO79__FUNC_CONN_DSP_JDI (MTK_PIN_NO(79) | 4) +#define PINMUX_GPIO79__FUNC_TSFDC_TSSEL2 (MTK_PIN_NO(79) | 6) +#define PINMUX_GPIO79__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(79) | 7) + +#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define PINMUX_GPIO80__FUNC_MSDC1_DAT1 (MTK_PIN_NO(80) | 1) +#define PINMUX_GPIO80__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(80) | 2) +#define PINMUX_GPIO80__FUNC_UDI_TDO (MTK_PIN_NO(80) | 3) +#define PINMUX_GPIO80__FUNC_CONN_DSP_JDO (MTK_PIN_NO(80) | 4) +#define PINMUX_GPIO80__FUNC_TSFDC_TSSEL1 (MTK_PIN_NO(80) | 6) +#define PINMUX_GPIO80__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(80) | 7) + +#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define PINMUX_GPIO81__FUNC_MSDC1_DAT2 (MTK_PIN_NO(81) | 1) +#define PINMUX_GPIO81__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 2) +#define PINMUX_GPIO81__FUNC_UDI_NTRST (MTK_PIN_NO(81) | 3) +#define PINMUX_GPIO81__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 4) +#define PINMUX_GPIO81__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(81) | 5) +#define PINMUX_GPIO81__FUNC_TSFDC_TSSEL0 (MTK_PIN_NO(81) | 6) +#define PINMUX_GPIO81__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(81) | 7) + +#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define PINMUX_GPIO82__FUNC_MSDC1_DAT3 (MTK_PIN_NO(82) | 1) +#define PINMUX_GPIO82__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(82) | 3) +#define PINMUX_GPIO82__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(82) | 4) +#define PINMUX_GPIO82__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(82) | 5) +#define PINMUX_GPIO82__FUNC_TSFDC_RCK_SELB (MTK_PIN_NO(82) | 6) + +#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define PINMUX_GPIO83__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(83) | 1) +#define PINMUX_GPIO83__FUNC_TSFDC_26M (MTK_PIN_NO(83) | 6) + +#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define PINMUX_GPIO84__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(84) | 1) +#define PINMUX_GPIO84__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(84) | 3) +#define PINMUX_GPIO84__FUNC_APU_JTAG_TCK (MTK_PIN_NO(84) | 4) +#define PINMUX_GPIO84__FUNC_TSFDC_SDO (MTK_PIN_NO(84) | 6) +#define PINMUX_GPIO84__FUNC_CONN_DSP_L5_JCK (MTK_PIN_NO(84) | 7) + +#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define PINMUX_GPIO85__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(85) | 1) +#define PINMUX_GPIO85__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(85) | 3) +#define PINMUX_GPIO85__FUNC_APU_JTAG_TRST (MTK_PIN_NO(85) | 4) +#define PINMUX_GPIO85__FUNC_TSFDC_FOUT (MTK_PIN_NO(85) | 6) +#define PINMUX_GPIO85__FUNC_CONN_DSP_L5_JINTP (MTK_PIN_NO(85) | 7) + +#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define PINMUX_GPIO86__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(86) | 1) +#define PINMUX_GPIO86__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(86) | 3) +#define PINMUX_GPIO86__FUNC_APU_JTAG_TDI (MTK_PIN_NO(86) | 4) +#define PINMUX_GPIO86__FUNC_TSFDC_SCK (MTK_PIN_NO(86) | 6) +#define PINMUX_GPIO86__FUNC_CONN_DSP_L5_JDI (MTK_PIN_NO(86) | 7) + +#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define PINMUX_GPIO87__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(87) | 1) +#define PINMUX_GPIO87__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(87) | 3) +#define PINMUX_GPIO87__FUNC_APU_JTAG_TMS (MTK_PIN_NO(87) | 4) +#define PINMUX_GPIO87__FUNC_TSFDC_SDI (MTK_PIN_NO(87) | 6) +#define PINMUX_GPIO87__FUNC_CONN_DSP_L5_JMS (MTK_PIN_NO(87) | 7) + +#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define PINMUX_GPIO88__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(88) | 1) +#define PINMUX_GPIO88__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(88) | 3) +#define PINMUX_GPIO88__FUNC_APU_JTAG_TDO (MTK_PIN_NO(88) | 4) +#define PINMUX_GPIO88__FUNC_TSFDC_SCF (MTK_PIN_NO(88) | 6) +#define PINMUX_GPIO88__FUNC_CONN_DSP_L5_JDO (MTK_PIN_NO(88) | 7) + +#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1) +#define PINMUX_GPIO89__FUNC_DBG_MON_B8 (MTK_PIN_NO(89) | 7) + +#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1) +#define PINMUX_GPIO90__FUNC_DBG_MON_B9 (MTK_PIN_NO(90) | 7) + +#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define PINMUX_GPIO91__FUNC_DISP_PWM (MTK_PIN_NO(91) | 1) +#define PINMUX_GPIO91__FUNC_DBG_MON_B10 (MTK_PIN_NO(91) | 7) + +#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define PINMUX_GPIO92__FUNC_CMMCLK0 (MTK_PIN_NO(92) | 1) +#define PINMUX_GPIO92__FUNC_DBG_MON_A23 (MTK_PIN_NO(92) | 7) + +#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define PINMUX_GPIO93__FUNC_CMMCLK1 (MTK_PIN_NO(93) | 1) +#define PINMUX_GPIO93__FUNC_DBG_MON_A24 (MTK_PIN_NO(93) | 7) + +#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 1) +#define PINMUX_GPIO94__FUNC_DBG_MON_A25 (MTK_PIN_NO(94) | 7) + +#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define PINMUX_GPIO95__FUNC_CMMCLK3 (MTK_PIN_NO(95) | 1) +#define PINMUX_GPIO95__FUNC_MD32_1_TXD (MTK_PIN_NO(95) | 5) +#define PINMUX_GPIO95__FUNC_PTA_TXD (MTK_PIN_NO(95) | 6) +#define PINMUX_GPIO95__FUNC_DBG_MON_A26 (MTK_PIN_NO(95) | 7) + +#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define PINMUX_GPIO96__FUNC_CMMCLK4 (MTK_PIN_NO(96) | 1) +#define PINMUX_GPIO96__FUNC_MD32_1_RXD (MTK_PIN_NO(96) | 5) +#define PINMUX_GPIO96__FUNC_PTA_RXD (MTK_PIN_NO(96) | 6) +#define PINMUX_GPIO96__FUNC_DBG_MON_A27 (MTK_PIN_NO(96) | 7) + +#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define PINMUX_GPIO97__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(97) | 1) + +#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define PINMUX_GPIO98__FUNC_DIGRF_IRQ (MTK_PIN_NO(98) | 1) + +#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define PINMUX_GPIO99__FUNC_BPI_BUS0 (MTK_PIN_NO(99) | 1) +#define PINMUX_GPIO99__FUNC_MFG_TSFDC_EN (MTK_PIN_NO(99) | 4) +#define PINMUX_GPIO99__FUNC_ANT_SEL0 (MTK_PIN_NO(99) | 6) +#define PINMUX_GPIO99__FUNC_DBG_MON_B11 (MTK_PIN_NO(99) | 7) + +#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define PINMUX_GPIO100__FUNC_BPI_BUS1 (MTK_PIN_NO(100) | 1) +#define PINMUX_GPIO100__FUNC_MFG_TSFDC_VCO_RST (MTK_PIN_NO(100) | 4) +#define PINMUX_GPIO100__FUNC_ANT_SEL1 (MTK_PIN_NO(100) | 6) +#define PINMUX_GPIO100__FUNC_DBG_MON_B12 (MTK_PIN_NO(100) | 7) + +#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define PINMUX_GPIO101__FUNC_BPI_BUS2 (MTK_PIN_NO(101) | 1) +#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 3) +#define PINMUX_GPIO101__FUNC_MFG_TSFDC_TSSEL2 (MTK_PIN_NO(101) | 4) +#define PINMUX_GPIO101__FUNC_ANT_SEL2 (MTK_PIN_NO(101) | 6) +#define PINMUX_GPIO101__FUNC_DBG_MON_B13 (MTK_PIN_NO(101) | 7) + +#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define PINMUX_GPIO102__FUNC_BPI_BUS3 (MTK_PIN_NO(102) | 1) +#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 3) +#define PINMUX_GPIO102__FUNC_MFG_TSFDC_TSSEL1 (MTK_PIN_NO(102) | 4) +#define PINMUX_GPIO102__FUNC_ANT_SEL3 (MTK_PIN_NO(102) | 6) +#define PINMUX_GPIO102__FUNC_DBG_MON_B14 (MTK_PIN_NO(102) | 7) + +#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define PINMUX_GPIO103__FUNC_BPI_BUS4 (MTK_PIN_NO(103) | 1) +#define PINMUX_GPIO103__FUNC_MFG_TSFDC_TSSEL0 (MTK_PIN_NO(103) | 4) +#define PINMUX_GPIO103__FUNC_ANT_SEL4 (MTK_PIN_NO(103) | 6) +#define PINMUX_GPIO103__FUNC_DBG_MON_B15 (MTK_PIN_NO(103) | 7) + +#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define PINMUX_GPIO104__FUNC_BPI_BUS5 (MTK_PIN_NO(104) | 1) +#define PINMUX_GPIO104__FUNC_MFG_TSFDC_RCK_SELB (MTK_PIN_NO(104) | 4) +#define PINMUX_GPIO104__FUNC_ANT_SEL5 (MTK_PIN_NO(104) | 6) +#define PINMUX_GPIO104__FUNC_DBG_MON_B16 (MTK_PIN_NO(104) | 7) + +#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define PINMUX_GPIO105__FUNC_BPI_BUS6 (MTK_PIN_NO(105) | 1) +#define PINMUX_GPIO105__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(105) | 2) +#define PINMUX_GPIO105__FUNC_ANT_SEL6 (MTK_PIN_NO(105) | 6) +#define PINMUX_GPIO105__FUNC_DBG_MON_B17 (MTK_PIN_NO(105) | 7) + +#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define PINMUX_GPIO106__FUNC_BPI_BUS7 (MTK_PIN_NO(106) | 1) +#define PINMUX_GPIO106__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(106) | 2) +#define PINMUX_GPIO106__FUNC_MFG_TSFDC_SDO (MTK_PIN_NO(106) | 4) +#define PINMUX_GPIO106__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(106) | 5) +#define PINMUX_GPIO106__FUNC_ANT_SEL7 (MTK_PIN_NO(106) | 6) +#define PINMUX_GPIO106__FUNC_DBG_MON_B18 (MTK_PIN_NO(106) | 7) + +#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define PINMUX_GPIO107__FUNC_BPI_BUS8 (MTK_PIN_NO(107) | 1) +#define PINMUX_GPIO107__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(107) | 2) +#define PINMUX_GPIO107__FUNC_MFG_TSFDC_FOUT (MTK_PIN_NO(107) | 4) +#define PINMUX_GPIO107__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(107) | 5) +#define PINMUX_GPIO107__FUNC_ANT_SEL8 (MTK_PIN_NO(107) | 6) +#define PINMUX_GPIO107__FUNC_DBG_MON_B19 (MTK_PIN_NO(107) | 7) + +#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define PINMUX_GPIO108__FUNC_BPI_BUS9 (MTK_PIN_NO(108) | 1) +#define PINMUX_GPIO108__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(108) | 2) +#define PINMUX_GPIO108__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(108) | 5) +#define PINMUX_GPIO108__FUNC_ANT_SEL9 (MTK_PIN_NO(108) | 6) +#define PINMUX_GPIO108__FUNC_DBG_MON_B20 (MTK_PIN_NO(108) | 7) + +#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define PINMUX_GPIO109__FUNC_BPI_BUS10 (MTK_PIN_NO(109) | 1) +#define PINMUX_GPIO109__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(109) | 2) +#define PINMUX_GPIO109__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(109) | 5) +#define PINMUX_GPIO109__FUNC_ANT_SEL10 (MTK_PIN_NO(109) | 6) +#define PINMUX_GPIO109__FUNC_DBG_MON_B21 (MTK_PIN_NO(109) | 7) + +#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define PINMUX_GPIO110__FUNC_BPI_BUS11 (MTK_PIN_NO(110) | 1) +#define PINMUX_GPIO110__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(110) | 2) +#define PINMUX_GPIO110__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(110) | 5) +#define PINMUX_GPIO110__FUNC_ANT_SEL11 (MTK_PIN_NO(110) | 6) +#define PINMUX_GPIO110__FUNC_DBG_MON_B22 (MTK_PIN_NO(110) | 7) + +#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define PINMUX_GPIO111__FUNC_BPI_BUS12 (MTK_PIN_NO(111) | 1) +#define PINMUX_GPIO111__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(111) | 2) +#define PINMUX_GPIO111__FUNC_CLKM0 (MTK_PIN_NO(111) | 3) +#define PINMUX_GPIO111__FUNC_I2SIN4_BCK (MTK_PIN_NO(111) | 5) +#define PINMUX_GPIO111__FUNC_ANT_SEL12 (MTK_PIN_NO(111) | 6) +#define PINMUX_GPIO111__FUNC_DBG_MON_B23 (MTK_PIN_NO(111) | 7) + +#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define PINMUX_GPIO112__FUNC_BPI_BUS13 (MTK_PIN_NO(112) | 1) +#define PINMUX_GPIO112__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(112) | 2) +#define PINMUX_GPIO112__FUNC_CLKM1 (MTK_PIN_NO(112) | 3) +#define PINMUX_GPIO112__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(112) | 5) +#define PINMUX_GPIO112__FUNC_ANT_SEL13 (MTK_PIN_NO(112) | 6) +#define PINMUX_GPIO112__FUNC_DBG_MON_B24 (MTK_PIN_NO(112) | 7) + +#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define PINMUX_GPIO113__FUNC_BPI_BUS14 (MTK_PIN_NO(113) | 1) +#define PINMUX_GPIO113__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(113) | 2) +#define PINMUX_GPIO113__FUNC_CLKM2 (MTK_PIN_NO(113) | 3) +#define PINMUX_GPIO113__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(113) | 5) +#define PINMUX_GPIO113__FUNC_ANT_SEL14 (MTK_PIN_NO(113) | 6) +#define PINMUX_GPIO113__FUNC_DBG_MON_B25 (MTK_PIN_NO(113) | 7) + +#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define PINMUX_GPIO114__FUNC_BPI_BUS15 (MTK_PIN_NO(114) | 1) +#define PINMUX_GPIO114__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(114) | 2) +#define PINMUX_GPIO114__FUNC_CLKM3 (MTK_PIN_NO(114) | 3) +#define PINMUX_GPIO114__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(114) | 5) +#define PINMUX_GPIO114__FUNC_ANT_SEL15 (MTK_PIN_NO(114) | 6) +#define PINMUX_GPIO114__FUNC_DBG_MON_B26 (MTK_PIN_NO(114) | 7) + +#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define PINMUX_GPIO115__FUNC_BPI_BUS16 (MTK_PIN_NO(115) | 1) +#define PINMUX_GPIO115__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(115) | 2) +#define PINMUX_GPIO115__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(115) | 5) +#define PINMUX_GPIO115__FUNC_ANT_SEL16 (MTK_PIN_NO(115) | 6) +#define PINMUX_GPIO115__FUNC_DBG_MON_B27 (MTK_PIN_NO(115) | 7) + +#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define PINMUX_GPIO116__FUNC_BPI_BUS17 (MTK_PIN_NO(116) | 1) +#define PINMUX_GPIO116__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(116) | 2) +#define PINMUX_GPIO116__FUNC_I2SIN4_LRCK (MTK_PIN_NO(116) | 5) +#define PINMUX_GPIO116__FUNC_ANT_SEL17 (MTK_PIN_NO(116) | 6) +#define PINMUX_GPIO116__FUNC_DBG_MON_B28 (MTK_PIN_NO(116) | 7) + +#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define PINMUX_GPIO117__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(117) | 1) +#define PINMUX_GPIO117__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(117) | 2) +#define PINMUX_GPIO117__FUNC_BPI_BUS18 (MTK_PIN_NO(117) | 3) +#define PINMUX_GPIO117__FUNC_ANT_SEL18 (MTK_PIN_NO(117) | 6) + +#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define PINMUX_GPIO118__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(118) | 1) +#define PINMUX_GPIO118__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(118) | 2) +#define PINMUX_GPIO118__FUNC_BPI_BUS19 (MTK_PIN_NO(118) | 3) +#define PINMUX_GPIO118__FUNC_ANT_SEL19 (MTK_PIN_NO(118) | 6) + +#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define PINMUX_GPIO119__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(119) | 1) +#define PINMUX_GPIO119__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(119) | 2) +#define PINMUX_GPIO119__FUNC_BPI_BUS20 (MTK_PIN_NO(119) | 3) +#define PINMUX_GPIO119__FUNC_ANT_SEL20 (MTK_PIN_NO(119) | 6) + +#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define PINMUX_GPIO120__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(120) | 1) +#define PINMUX_GPIO120__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(120) | 2) +#define PINMUX_GPIO120__FUNC_BPI_BUS21 (MTK_PIN_NO(120) | 3) +#define PINMUX_GPIO120__FUNC_ANT_SEL21 (MTK_PIN_NO(120) | 6) + +#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define PINMUX_GPIO121__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(121) | 1) +#define PINMUX_GPIO121__FUNC_MIPI4_D_SCLK (MTK_PIN_NO(121) | 2) +#define PINMUX_GPIO121__FUNC_BPI_BUS22 (MTK_PIN_NO(121) | 3) +#define PINMUX_GPIO121__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(121) | 6) + +#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define PINMUX_GPIO122__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(122) | 1) +#define PINMUX_GPIO122__FUNC_MIPI4_D_SDATA (MTK_PIN_NO(122) | 2) +#define PINMUX_GPIO122__FUNC_BPI_BUS23 (MTK_PIN_NO(122) | 3) +#define PINMUX_GPIO122__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(122) | 6) + +#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define PINMUX_GPIO123__FUNC_MIPI_M_SCLK (MTK_PIN_NO(123) | 1) + +#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define PINMUX_GPIO124__FUNC_MIPI_M_SDATA (MTK_PIN_NO(124) | 1) + +#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define PINMUX_GPIO125__FUNC_SCL0 (MTK_PIN_NO(125) | 1) +#define PINMUX_GPIO125__FUNC_SCP_SCL4 (MTK_PIN_NO(125) | 2) +#define PINMUX_GPIO125__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(125) | 3) +#define PINMUX_GPIO125__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(125) | 4) +#define PINMUX_GPIO125__FUNC_TP_GPIO4_AO (MTK_PIN_NO(125) | 5) +#define PINMUX_GPIO125__FUNC_UTXD2 (MTK_PIN_NO(125) | 6) + +#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define PINMUX_GPIO126__FUNC_SDA0 (MTK_PIN_NO(126) | 1) +#define PINMUX_GPIO126__FUNC_SCP_SDA4 (MTK_PIN_NO(126) | 2) +#define PINMUX_GPIO126__FUNC_TP_URXD2_VLP (MTK_PIN_NO(126) | 3) +#define PINMUX_GPIO126__FUNC_TP_URTS1_VLP (MTK_PIN_NO(126) | 4) +#define PINMUX_GPIO126__FUNC_TP_GPIO5_AO (MTK_PIN_NO(126) | 5) +#define PINMUX_GPIO126__FUNC_URXD2 (MTK_PIN_NO(126) | 6) + +#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define PINMUX_GPIO127__FUNC_SCL1 (MTK_PIN_NO(127) | 1) +#define PINMUX_GPIO127__FUNC_SCP_SCL5 (MTK_PIN_NO(127) | 2) +#define PINMUX_GPIO127__FUNC_TP_UCTS2_VLP (MTK_PIN_NO(127) | 3) +#define PINMUX_GPIO127__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(127) | 4) +#define PINMUX_GPIO127__FUNC_TP_GPIO6_AO (MTK_PIN_NO(127) | 5) +#define PINMUX_GPIO127__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(127) | 6) + +#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define PINMUX_GPIO128__FUNC_SDA1 (MTK_PIN_NO(128) | 1) +#define PINMUX_GPIO128__FUNC_SCP_SDA5 (MTK_PIN_NO(128) | 2) +#define PINMUX_GPIO128__FUNC_TP_URTS2_VLP (MTK_PIN_NO(128) | 3) +#define PINMUX_GPIO128__FUNC_TP_URXD1_VLP (MTK_PIN_NO(128) | 4) +#define PINMUX_GPIO128__FUNC_TP_GPIO7_AO (MTK_PIN_NO(128) | 5) +#define PINMUX_GPIO128__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(128) | 6) + +#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define PINMUX_GPIO129__FUNC_SCL2 (MTK_PIN_NO(129) | 1) + +#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define PINMUX_GPIO130__FUNC_SDA2 (MTK_PIN_NO(130) | 1) + +#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define PINMUX_GPIO131__FUNC_SCL3 (MTK_PIN_NO(131) | 1) +#define PINMUX_GPIO131__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(131) | 3) +#define PINMUX_GPIO131__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(131) | 6) + +#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define PINMUX_GPIO132__FUNC_SDA3 (MTK_PIN_NO(132) | 1) +#define PINMUX_GPIO132__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(132) | 3) +#define PINMUX_GPIO132__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(132) | 6) + +#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define PINMUX_GPIO133__FUNC_SCL4 (MTK_PIN_NO(133) | 1) + +#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define PINMUX_GPIO134__FUNC_SDA4 (MTK_PIN_NO(134) | 1) + +#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define PINMUX_GPIO135__FUNC_SCL5 (MTK_PIN_NO(135) | 1) + +#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define PINMUX_GPIO136__FUNC_SDA5 (MTK_PIN_NO(136) | 1) + +#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define PINMUX_GPIO137__FUNC_SCL6 (MTK_PIN_NO(137) | 1) + +#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define PINMUX_GPIO138__FUNC_SDA6 (MTK_PIN_NO(138) | 1) + +#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define PINMUX_GPIO139__FUNC_SCL7 (MTK_PIN_NO(139) | 1) +#define PINMUX_GPIO139__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(139) | 3) +#define PINMUX_GPIO139__FUNC_MD_UTXD0 (MTK_PIN_NO(139) | 4) +#define PINMUX_GPIO139__FUNC_UTXD1 (MTK_PIN_NO(139) | 6) + +#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define PINMUX_GPIO140__FUNC_SDA7 (MTK_PIN_NO(140) | 1) +#define PINMUX_GPIO140__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(140) | 3) +#define PINMUX_GPIO140__FUNC_MD_URXD0 (MTK_PIN_NO(140) | 4) +#define PINMUX_GPIO140__FUNC_URXD1 (MTK_PIN_NO(140) | 6) + +#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define PINMUX_GPIO141__FUNC_SCL8 (MTK_PIN_NO(141) | 1) + +#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define PINMUX_GPIO142__FUNC_SDA8 (MTK_PIN_NO(142) | 1) + +#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define PINMUX_GPIO143__FUNC_SCL9 (MTK_PIN_NO(143) | 1) +#define PINMUX_GPIO143__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(143) | 2) +#define PINMUX_GPIO143__FUNC_HFRP_UTXD1 (MTK_PIN_NO(143) | 3) +#define PINMUX_GPIO143__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 4) +#define PINMUX_GPIO143__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 5) +#define PINMUX_GPIO143__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(143) | 7) + +#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define PINMUX_GPIO144__FUNC_SDA9 (MTK_PIN_NO(144) | 1) +#define PINMUX_GPIO144__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(144) | 2) +#define PINMUX_GPIO144__FUNC_HFRP_URXD1 (MTK_PIN_NO(144) | 3) +#define PINMUX_GPIO144__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 4) +#define PINMUX_GPIO144__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 5) +#define PINMUX_GPIO144__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(144) | 7) + +#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define PINMUX_GPIO145__FUNC_SCL10 (MTK_PIN_NO(145) | 1) +#define PINMUX_GPIO145__FUNC_SCP_SCL0 (MTK_PIN_NO(145) | 2) +#define PINMUX_GPIO145__FUNC_TP_GPIO8_AO (MTK_PIN_NO(145) | 5) + +#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define PINMUX_GPIO146__FUNC_SDA10 (MTK_PIN_NO(146) | 1) +#define PINMUX_GPIO146__FUNC_SCP_SDA0 (MTK_PIN_NO(146) | 2) +#define PINMUX_GPIO146__FUNC_TP_GPIO9_AO (MTK_PIN_NO(146) | 5) + +#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define PINMUX_GPIO147__FUNC_SCL11 (MTK_PIN_NO(147) | 1) +#define PINMUX_GPIO147__FUNC_SCP_SCL1 (MTK_PIN_NO(147) | 2) +#define PINMUX_GPIO147__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(147) | 3) +#define PINMUX_GPIO147__FUNC_DMIC_CLK (MTK_PIN_NO(147) | 4) +#define PINMUX_GPIO147__FUNC_TP_GPIO10_AO (MTK_PIN_NO(147) | 5) +#define PINMUX_GPIO147__FUNC_EXTIF0_PRI (MTK_PIN_NO(147) | 6) + +#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define PINMUX_GPIO148__FUNC_SDA11 (MTK_PIN_NO(148) | 1) +#define PINMUX_GPIO148__FUNC_SCP_SDA1 (MTK_PIN_NO(148) | 2) +#define PINMUX_GPIO148__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(148) | 3) +#define PINMUX_GPIO148__FUNC_DMIC_DAT (MTK_PIN_NO(148) | 4) +#define PINMUX_GPIO148__FUNC_TP_GPIO11_AO (MTK_PIN_NO(148) | 5) +#define PINMUX_GPIO148__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(148) | 6) + +#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define PINMUX_GPIO149__FUNC_KPROW2 (MTK_PIN_NO(149) | 1) +#define PINMUX_GPIO149__FUNC_PWM_VLP (MTK_PIN_NO(149) | 2) +#define PINMUX_GPIO149__FUNC_MD_INT0 (MTK_PIN_NO(149) | 4) +#define PINMUX_GPIO149__FUNC_TP_GPIO12_AO (MTK_PIN_NO(149) | 5) +#define PINMUX_GPIO149__FUNC_SCL0 (MTK_PIN_NO(149) | 6) +#define PINMUX_GPIO149__FUNC_DBG_MON_A28 (MTK_PIN_NO(149) | 7) + +#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define PINMUX_GPIO150__FUNC_KPCOL2 (MTK_PIN_NO(150) | 1) +#define PINMUX_GPIO150__FUNC_PWM_VLP (MTK_PIN_NO(150) | 2) +#define PINMUX_GPIO150__FUNC_CMMCLK5 (MTK_PIN_NO(150) | 3) +#define PINMUX_GPIO150__FUNC_MD_INT3 (MTK_PIN_NO(150) | 4) +#define PINMUX_GPIO150__FUNC_TP_GPIO13_AO (MTK_PIN_NO(150) | 5) +#define PINMUX_GPIO150__FUNC_SDA0 (MTK_PIN_NO(150) | 6) + +#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define PINMUX_GPIO151__FUNC_SRCLKENAI0 (MTK_PIN_NO(151) | 1) +#define PINMUX_GPIO151__FUNC_MD_INT4 (MTK_PIN_NO(151) | 4) +#define PINMUX_GPIO151__FUNC_TP_GPIO14_AO (MTK_PIN_NO(151) | 5) +#define PINMUX_GPIO151__FUNC_DBG_MON_A29 (MTK_PIN_NO(151) | 7) + +#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define PINMUX_GPIO152__FUNC_SRCLKENAI1 (MTK_PIN_NO(152) | 1) +#define PINMUX_GPIO152__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(152) | 4) +#define PINMUX_GPIO152__FUNC_TP_GPIO15_AO (MTK_PIN_NO(152) | 5) +#define PINMUX_GPIO152__FUNC_DBG_MON_A30 (MTK_PIN_NO(152) | 7) + +#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define PINMUX_GPIO153__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(153) | 1) +#define PINMUX_GPIO153__FUNC_DISP_PWM1 (MTK_PIN_NO(153) | 2) +#define PINMUX_GPIO153__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(153) | 4) +#define PINMUX_GPIO153__FUNC_DBG_MON_A0 (MTK_PIN_NO(153) | 7) + +#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define PINMUX_GPIO154__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(154) | 1) +#define PINMUX_GPIO154__FUNC_LCM_RST1 (MTK_PIN_NO(154) | 2) +#define PINMUX_GPIO154__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(154) | 3) +#define PINMUX_GPIO154__FUNC_CMFLASH2 (MTK_PIN_NO(154) | 4) +#define PINMUX_GPIO154__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(154) | 5) +#define PINMUX_GPIO154__FUNC_DBG_MON_A1 (MTK_PIN_NO(154) | 7) + +#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define PINMUX_GPIO155__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(155) | 1) +#define PINMUX_GPIO155__FUNC_DSI_TE1 (MTK_PIN_NO(155) | 2) +#define PINMUX_GPIO155__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(155) | 3) +#define PINMUX_GPIO155__FUNC_CMFLASH3 (MTK_PIN_NO(155) | 4) +#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 5) +#define PINMUX_GPIO155__FUNC_DBG_MON_A2 (MTK_PIN_NO(155) | 7) + +#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define PINMUX_GPIO156__FUNC_SPMI_M_SCL (MTK_PIN_NO(156) | 1) + +#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define PINMUX_GPIO157__FUNC_SPMI_M_SDA (MTK_PIN_NO(157) | 1) + +#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define PINMUX_GPIO158__FUNC_SPMI_P_SCL (MTK_PIN_NO(158) | 1) + +#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define PINMUX_GPIO159__FUNC_SPMI_P_SDA (MTK_PIN_NO(159) | 1) + +#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define PINMUX_GPIO160__FUNC_SRCLKENA0 (MTK_PIN_NO(160) | 1) + +#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define PINMUX_GPIO161__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(161) | 1) + +#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define PINMUX_GPIO162__FUNC_RTC32K_CK (MTK_PIN_NO(162) | 1) + +#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define PINMUX_GPIO163__FUNC_WATCHDOG (MTK_PIN_NO(163) | 1) + +#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(164) | 1) +#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI_A (MTK_PIN_NO(164) | 3) + +#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define PINMUX_GPIO165__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(165) | 1) + +#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(166) | 1) +#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0_A (MTK_PIN_NO(166) | 3) + +#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(167) | 1) +#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1_A (MTK_PIN_NO(167) | 3) + +#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define PINMUX_GPIO168__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(168) | 1) +#define PINMUX_GPIO168__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(168) | 2) + +#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define PINMUX_GPIO169__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(169) | 1) +#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO (MTK_PIN_NO(169) | 2) +#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO_A (MTK_PIN_NO(169) | 3) + +#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(170) | 1) +#define PINMUX_GPIO170__FUNC_VOW_DAT_MISO (MTK_PIN_NO(170) | 2) +#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0_A (MTK_PIN_NO(170) | 3) + +#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(171) | 1) +#define PINMUX_GPIO171__FUNC_VOW_CLK_MISO (MTK_PIN_NO(171) | 2) +#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1_A (MTK_PIN_NO(171) | 3) + +#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1) +#define PINMUX_GPIO172__FUNC_DBG_MON_A31 (MTK_PIN_NO(172) | 7) + +#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1) + +#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define PINMUX_GPIO174__FUNC_CONN_BT_CLK (MTK_PIN_NO(174) | 1) + +#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define PINMUX_GPIO175__FUNC_CONN_BT_DATA (MTK_PIN_NO(175) | 1) + +#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define PINMUX_GPIO176__FUNC_CONN_HRST_B (MTK_PIN_NO(176) | 1) + +#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define PINMUX_GPIO177__FUNC_CONN_WB_PTA (MTK_PIN_NO(177) | 1) + +#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1) + +#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1) + +#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1) + +#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1) +#define PINMUX_GPIO181__FUNC_CONN_TOP_CLK_2 (MTK_PIN_NO(181) | 2) +#define PINMUX_GPIO181__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(181) | 3) + +#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1) +#define PINMUX_GPIO182__FUNC_CONN_TOP_DATA_2 (MTK_PIN_NO(182) | 2) +#define PINMUX_GPIO182__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(182) | 3) + +#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define PINMUX_GPIO183__FUNC_CONN_HRST_B_2 (MTK_PIN_NO(183) | 1) + +#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define PINMUX_GPIO184__FUNC_MSDC0_DSL (MTK_PIN_NO(184) | 1) +#define PINMUX_GPIO184__FUNC_ANT_SEL13 (MTK_PIN_NO(184) | 3) + +#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define PINMUX_GPIO185__FUNC_MSDC0_CLK (MTK_PIN_NO(185) | 1) +#define PINMUX_GPIO185__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(185) | 2) +#define PINMUX_GPIO185__FUNC_ANT_SEL14 (MTK_PIN_NO(185) | 3) + +#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define PINMUX_GPIO186__FUNC_MSDC0_CMD (MTK_PIN_NO(186) | 1) +#define PINMUX_GPIO186__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(186) | 2) +#define PINMUX_GPIO186__FUNC_ANT_SEL15 (MTK_PIN_NO(186) | 3) +#define PINMUX_GPIO186__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(186) | 5) + +#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define PINMUX_GPIO187__FUNC_MSDC0_RSTB (MTK_PIN_NO(187) | 1) +#define PINMUX_GPIO187__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(187) | 2) +#define PINMUX_GPIO187__FUNC_ANT_SEL16 (MTK_PIN_NO(187) | 3) +#define PINMUX_GPIO187__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(187) | 5) + +#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define PINMUX_GPIO188__FUNC_MSDC0_DAT0 (MTK_PIN_NO(188) | 1) +#define PINMUX_GPIO188__FUNC_ANT_SEL17 (MTK_PIN_NO(188) | 3) +#define PINMUX_GPIO188__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(188) | 5) + +#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define PINMUX_GPIO189__FUNC_MSDC0_DAT1 (MTK_PIN_NO(189) | 1) +#define PINMUX_GPIO189__FUNC_ANT_SEL18 (MTK_PIN_NO(189) | 3) +#define PINMUX_GPIO189__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(189) | 5) + +#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define PINMUX_GPIO190__FUNC_MSDC0_DAT2 (MTK_PIN_NO(190) | 1) +#define PINMUX_GPIO190__FUNC_DMIC1_CLK (MTK_PIN_NO(190) | 2) +#define PINMUX_GPIO190__FUNC_ANT_SEL19 (MTK_PIN_NO(190) | 3) +#define PINMUX_GPIO190__FUNC_I2SIN4_BCK (MTK_PIN_NO(190) | 5) + +#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define PINMUX_GPIO191__FUNC_MSDC0_DAT3 (MTK_PIN_NO(191) | 1) +#define PINMUX_GPIO191__FUNC_DMIC1_DAT (MTK_PIN_NO(191) | 2) +#define PINMUX_GPIO191__FUNC_ANT_SEL20 (MTK_PIN_NO(191) | 3) +#define PINMUX_GPIO191__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(191) | 5) + +#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define PINMUX_GPIO192__FUNC_MSDC0_DAT4 (MTK_PIN_NO(192) | 1) +#define PINMUX_GPIO192__FUNC_IDDIG (MTK_PIN_NO(192) | 2) +#define PINMUX_GPIO192__FUNC_ANT_SEL21 (MTK_PIN_NO(192) | 3) +#define PINMUX_GPIO192__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(192) | 4) +#define PINMUX_GPIO192__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(192) | 5) + +#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define PINMUX_GPIO193__FUNC_MSDC0_DAT5 (MTK_PIN_NO(193) | 1) +#define PINMUX_GPIO193__FUNC_USB_DRVVBUS (MTK_PIN_NO(193) | 2) +#define PINMUX_GPIO193__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(193) | 4) +#define PINMUX_GPIO193__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(193) | 5) + +#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define PINMUX_GPIO194__FUNC_MSDC0_DAT6 (MTK_PIN_NO(194) | 1) +#define PINMUX_GPIO194__FUNC_VBUSVALID (MTK_PIN_NO(194) | 2) +#define PINMUX_GPIO194__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(194) | 5) + +#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define PINMUX_GPIO195__FUNC_MSDC0_DAT7 (MTK_PIN_NO(195) | 1) +#define PINMUX_GPIO195__FUNC_I2SIN4_LRCK (MTK_PIN_NO(195) | 5) + +#endif /* __MT6878_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 917fa39a74f8..158bd9a305d7 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -278,6 +278,10 @@ #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x8>; + }; + thermal_calibration: calib@198 { reg = <0x198 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts index 4f6cbb491287..2e39e7287730 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts +++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts @@ -3,13 +3,163 @@ /dts-v1/; #include "mt7981b.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "dt-bindings/pinctrl/mt65xx.h" / { compatible = "openwrt,one", "mediatek,mt7981b"; model = "OpenWrt One"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@40000000 { reg = <0 0x40000000 0 0x40000000>; device_type = "memory"; }; + + pwm-leds { + compatible = "pwm-leds"; + + led-0 { + color = <LED_COLOR_ID_WHITE>; + default-brightness = <0>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm 0 10000>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-brightness = <0>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm 1 10000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + }; +}; + +&pio { + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_0", "pwm1_1"; + }; + }; + + spi2_flash_pins: spi2-pins { + mux { + function = "spi"; + groups = "spi2"; + }; + + conf-pu { + bias-pull-up = <MTK_PUPD_SET_R1R0_11>; + drive-strength = <8>; + pins = "SPI2_CS", "SPI2_WP"; + }; + + conf-pd { + bias-pull-down = <MTK_PUPD_SET_R1R0_11>; + drive-strength = <8>; + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0x40000>; + label = "bl2-nor"; + }; + + partition@40000 { + reg = <0x40000 0xc0000>; + label = "factory"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + wifi_factory_calibration: eeprom@0 { + reg = <0x0 0x1000>; + }; + + wan_factory_mac: macaddr@24 { + reg = <0x24 0x6>; + compatible = "mac-base"; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@100000 { + reg = <0x100000 0x80000>; + label = "fip-nor"; + }; + + partition@180000 { + reg = <0x180000 0xc80000>; + label = "recovery"; + }; + }; + }; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi index 277c11247c13..416096b80770 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi @@ -41,6 +41,18 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@43000000 { + reg = <0 0x43000000 0 0x30000>; + no-map; + }; + }; + soc { compatible = "simple-bus"; ranges; @@ -82,7 +94,7 @@ #clock-cells = <1>; }; - pwm@10048000 { + pwm: pwm@10048000 { compatible = "mediatek,mt7981-pwm"; reg = <0 0x10048000 0 0x1000>; clocks = <&infracfg CLK_INFRA_PWM_STA>, @@ -94,7 +106,7 @@ #pwm-cells = <2>; }; - serial@11002000 { + uart0: serial@11002000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x100>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; @@ -102,10 +114,12 @@ clocks = <&infracfg CLK_INFRA_UART0_SEL>, <&infracfg CLK_INFRA_UART0_CK>; clock-names = "baud", "bus"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; status = "disabled"; }; - serial@11003000 { + uart1: serial@11003000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x100>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; @@ -116,7 +130,7 @@ status = "disabled"; }; - serial@11004000 { + uart2: serial@11004000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x100>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; @@ -142,7 +156,7 @@ status = "disabled"; }; - spi@11009000 { + spi2: spi@11009000 { compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm"; reg = <0 0x11009000 0 0x1000>; interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; @@ -229,6 +243,13 @@ gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0"; + }; + }; }; efuse@11f20000 { @@ -237,6 +258,10 @@ #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x10>; + }; + thermal_calibration: thermal-calib@274 { reg = <0x274 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index e7654dc9a1c9..19f538d160ab 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -42,7 +42,7 @@ compatible = "pwm-fan"; #cooling-cells = <2>; /* cooling level (0, 1, 2) - pwm inverted */ - cooling-levels = <255 96 0>; + cooling-levels = <255 40 0>; pwms = <&pwm 0 10000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index a8972330a7b8..7790601586cc 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -450,6 +450,10 @@ #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x8>; + }; + thermal_calibration: calib@274 { reg = <0x274 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts index 6f0c81e3fd94..0e41c07d3a5f 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts @@ -19,4 +19,5 @@ &int_2p5g_phy { pinctrl-0 = <&i2p5gbe_led0_pins>; pinctrl-names = "i2p5gbe-led"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts new file mode 100644 index 000000000000..c7ea6e88c4f4 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; + +#include "mt7988a-bananapi-bpi-r4-pro.dtsi" + +/ { + model = "Bananapi BPI-R4"; + compatible = "bananapi,bpi-r4-pro-4e", + "bananapi,bpi-r4-pro", + "mediatek,mt7988a"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts new file mode 100644 index 000000000000..c9a0e69e9dd5 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; + +#include "mt7988a-bananapi-bpi-r4-pro.dtsi" + +/ { + model = "Bananapi BPI-R4"; + compatible = "bananapi,bpi-r4-pro-8x", + "bananapi,bpi-r4-pro", + "mediatek,mt7988a"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso new file mode 100644 index 000000000000..9750916042de --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/* This enables key-b slot CN15 on pcie2(11280000 1L0) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-2-hog} { + output-low; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso new file mode 100644 index 000000000000..9830fb0fd97a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/* This enables key-b slot CN18 on pcie3(11290000 1L1) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-3-hog} { + output-low; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso new file mode 100644 index 000000000000..5ed2f0a6bd66 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/mmc@11230000} { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_emmc_51>; + pinctrl-1 = <&mmc0_pins_emmc_51>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x12814>; + vqmmc-supply = <®_1p8v>; + vmmc-supply = <®_3p3v>; + non-removable; + no-sd; + no-sdio; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso new file mode 100644 index 000000000000..1ec1a9fbd8ba --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/mmc@11230000} { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_sdcard>; + pinctrl-1 = <&mmc0_pins_sdcard>; + cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + no-mmc; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi new file mode 100644 index 000000000000..a48132f09411 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Sam.Shih <sam.shih@mediatek.com> + * Author: Frank Wunderlich <frank-w@public-files.de> + */ + +/dts-v1/; + +#include "mt7988a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/richtek,rt5190a-regulator.h> + +/ { + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + /* PCA9548 (0-0070) provides 4 i2c channels */ + i2c3 = &imux0; + i2c4 = &imux1_sfp1; + i2c5 = &imux2_sfp2; + i2c6 = &imux3_wifi; + }; + + chosen { + stdout-path = &serial0; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */ + cooling-levels = <0 80 128 255>; + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + pwms = <&pwm 0 50000>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + button-wps { + label = "WPS"; + gpios = <&pio 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_red: sys-led-red { + color = <LED_COLOR_ID_RED>; + gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_blue: sys-led-blue { + color = <LED_COLOR_ID_BLUE>; + gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_1p8v: regulator-dvdd1v8 { + compatible = "regulator-fixed"; + regulator-name = "DVDD1V8_SOC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3vd { + compatible = "regulator-fixed"; + regulator-name = "3V3VD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* SFP1 cage (LAN) */ + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&imux1_sfp1>; + los-gpios = <&pio 70 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 69 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 21 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + /* SFP2 cage (WAN) */ + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&imux2_sfp2>; + los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 1 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&cci { + proc-supply = <&rt5190_buck3>; +}; + +&cpu0 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu1 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu2 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu3 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu_thermal { + trips { + cpu_trip_hot: hot { + temperature = <120000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active_high: active-high { + temperature = <115000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_active_med: active-med { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_active_low: active-low { + temperature = <40000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map-cpu-active-high { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_active_high>; + }; + + map-cpu-active-med { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_active_med>; + }; + + map-cpu-active-low { + /* active: set fan to cooling level 0 */ + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active_low>; + }; + }; +}; + +ð { + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&fan { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + pwms = <&pwm 0 50000>; + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&gsw_phy0 { + pinctrl-0 = <&gbe0_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy0_led0 { + color = <LED_COLOR_ID_YELLOW>; + status = "okay"; +}; + +&gsw_port0 { + label = "mgmt"; +}; + +/* R4Pro has only port 0 connected, so disable the others */ +&gsw_phy1 { + status = "disabled"; +}; + +&gsw_port1 { + status = "disabled"; +}; + +&gsw_phy2 { + status = "disabled"; +}; + +&gsw_port2 { + status = "disabled"; +}; + +&gsw_phy3 { + status = "disabled"; +}; + +&gsw_port3 { + status = "disabled"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + rt5190a_64: rt5190a@64 { + compatible = "richtek,rt5190a"; + reg = <0x64>; + vin2-supply = <&rt5190_buck1>; + vin3-supply = <&rt5190_buck1>; + vin4-supply = <&rt5190_buck1>; + + regulators { + rt5190_buck1: buck1 { + regulator-name = "rt5190a-buck1"; + regulator-min-microvolt = <5090000>; + regulator-max-microvolt = <5090000>; + regulator-allowed-modes = + <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; + regulator-boot-on; + regulator-always-on; + }; + + buck2 { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + rt5190_buck3: buck3 { + regulator-name = "vproc"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4 { + regulator-name = "rt5190a-buck4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = + <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>; + regulator-boot-on; + regulator-always-on; + }; + + ldo { + regulator-name = "rt5190a-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + pca9545: i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: i2c-gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + address-width = <8>; + pagesize = <8>; + size = <256>; + }; + }; + + imux1_sfp1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + imux2_sfp2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + imux3_wifi: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* mPCIe SIM2 (11300000) */ +&pcie0 { + status = "okay"; +}; + +/* mPCIe (11310000 near leds) SIM3 */ +&pcie1 { + status = "okay"; +}; + +/* M.2 (11280000) 1L0 key-m SSD1 CN13 / key-b SIM1 CN15 */ +&pcie2 { + status = "okay"; +}; + +/* M.2 (11290000) 1L1 key-m SSD2 CN14 / key-b SIM2 CN18 */ +&pcie3 { + status = "okay"; +}; + +&pio { + gbe0_led0_pins: gbe0-led0-pins { + mux { + function = "led"; + groups = "gbe0_led0"; + }; + }; + + i2c0_pins: i2c0-g0-pins { + mux { + function = "i2c"; + groups = "i2c0_1"; + }; + }; + + i2c1_pins: i2c1-g0-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_1_pins: i2c2-g1-pins { + mux { + function = "i2c"; + groups = "i2c2_1"; + }; + }; + + mdio0_pins: mdio0-pins { + mux { + function = "eth"; + groups = "mdc_mdio0"; + }; + + conf { + pins = "SMI_0_MDC", "SMI_0_MDIO"; + drive-strength = <8>; + }; + }; + + mmc0_pins_emmc_51: mmc0-emmc-51-pins { + mux { + function = "flash"; + groups = "emmc_51"; + }; + }; + + mmc0_pins_sdcard: mmc0-sdcard-pins { + mux { + function = "flash"; + groups = "sdcard"; + }; + }; + + /* 1L0 0=key-b (CN15), 1=key-m (CN13) */ + pcie-2-hog { + gpio-hog; + gpios = <79 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* 1L1 0=key-b (CN18), 1=key-m (CN14) */ + pcie-3-hog { + gpio-hog; + gpios = <63 GPIO_ACTIVE_HIGH>; + output-high; + }; + + pwm0_pins: pwm0-pins { + mux { + groups = "pwm0"; + function = "pwm"; + }; + }; + + spi0_flash_pins: spi0-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; +}; + +&pwm { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&spi0 { + pinctrl-0 = <&spi0_flash_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi_nand: nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&spi_nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x200000>; + label = "bl2"; + }; + + partition@200000 { + compatible = "linux,ubi"; + reg = <0x200000 0xfe00000>; + label = "ubi"; + }; + }; +}; + +/* back USB */ +&ssusb0 { + /* Use U2P only instead of both U3P/U2P due to U3P serdes shared with pcie2 */ + phys = <&xphyu2port0 PHY_TYPE_USB2>; + mediatek,u3p-dis-msk = <1>; + status = "okay"; +}; + +/* front USB */ +&ssusb1 { + status = "okay"; +}; + +&switch { + dsa,member = <1 0>; + status = "okay"; +}; + +&tphy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&xsphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index 366203a72d6d..bec590d26659 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -418,7 +418,7 @@ nvmem-cell-names = "lvts-calib-data-1"; }; - usb@11190000 { + ssusb0: usb@11190000 { compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; reg = <0 0x11190000 0 0x2e00>, <0 0x11193e00 0 0x0100>; @@ -714,6 +714,10 @@ #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x10>; + }; + lvts_calibration: calib@918 { reg = <0x918 0x28>; }; @@ -995,6 +999,7 @@ int_2p5g_phy: ethernet-phy@15 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <15>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 960d8955d018..4e20a8f2eb25 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1445,11 +1445,11 @@ }; }; - audiosys: audio-controller@11220000 { + audiosys: clock-controller@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; #clock-cells = <1>; - afe: mt8183-afe-pcm { + afe: audio-controller { compatible = "mediatek,mt8183-audio"; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index ec452d657031..c7adafaa8328 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -3067,7 +3067,7 @@ jpgdec@0,10000 { compatible = "mediatek,mt8195-jpgdec-hw"; - reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */ + reg = <0 0x10000 0 0x10000>;/* JPGDEC_C1 */ iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, diff --git a/arch/arm64/boot/dts/mediatek/mt8196-gce.h b/arch/arm64/boot/dts/mediatek/mt8196-gce.h new file mode 100644 index 000000000000..aa909e4f4964 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8196-gce.h @@ -0,0 +1,612 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2025 MediaTek Inc. + * + */ + +#ifndef __DTS_GCE_MT8196_H +#define __DTS_GCE_MT8196_H + +/* GCE Thread Priority + * The GCE core has multiple GCE threads, each of which can independently + * execute its own sequence of instructions. + * However, the GCE threads on the same core cannot run in parallel. + * Different GCE threads can determine thread priority based on the scenario, + * thereby serving different user needs. + * + * Low priority thread is executed when no high priority thread is active. + * Same priority thread is scheduled by round robin. + */ +#define CMDQ_THR_PRIO_LOWEST 0 +#define CMDQ_THR_PRIO_1 1 +#define CMDQ_THR_PRIO_2 2 +#define CMDQ_THR_PRIO_3 3 +#define CMDQ_THR_PRIO_4 4 +#define CMDQ_THR_PRIO_5 5 +#define CMDQ_THR_PRIO_6 6 +#define CMDQ_THR_PRIO_HIGHEST 7 + +/* + * GCE0 Hardware Event IDs + * Different SoCs will have varying numbers of hardware event signals, + * which are sent from the corresponding hardware to the GCE. + * Each hardware event signal corresponds to an event ID in the GCE. + * The CMDQ driver can use the following event ID definitions to allow + * the client driver to use wait and clear APIs provided by CMDQ, enabling + * the GCE to execute operations in the instructions for that event ID. + * + * The event IDs of GCE0 are mainly used by display hardware. + */ +/* CMDQ_EVENT_DISP0_STREAM_SOF0 ~ 15: 0 ~ 15 */ +#define CMDQ_EVENT_DISP0_STREAM_SOF(n) (0 + (n)) +/* CMDQ_EVENT_DISP0_FRAME_DONE_SEL0 ~ 15: 16 ~ 31 */ +#define CMDQ_EVENT_DISP0_FRAME_DONE_SEL(n) (16 + (n)) +#define CMDQ_EVENT_DISP0_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 32 +#define CMDQ_EVENT_DISP0_DISP_WDMA0_SW_RST_DONE_ENG_EVENT 33 +#define CMDQ_EVENT_DISP0_DISP_POSTMASK1_RST_DONE_ENG_EVENT 34 +#define CMDQ_EVENT_DISP0_DISP_POSTMASK0_RST_DONE_ENG_EVENT 35 +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_TIMEOUT_ENG_EVENT 36 +/* CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT0 ~ 15: 37 ~ 52 */ +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT(n) (37 + (n)) +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_GET_RELEASE_ENG_EVENT 53 +#define CMDQ_EVENT_DISP0_DISP_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 54 +/* CMDQ_EVENT_DISP1_STREAM_SOF0 ~ 15: 55 ~ 70 */ +#define CMDQ_EVENT_DISP1_STREAM_SOF(n) (55 + (n)) +/* CMDQ_EVENT_DISP1_FRAME_DONE_SEL0 ~ 15: 71 ~ 86 */ +#define CMDQ_EVENT_DISP1_FRAME_DONE_SEL(n) (71 + (n)) +/* CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT0 ~ 15: 87 ~ 102 */ +#define CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT(n) (87 + (n)) +/* CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 103 ~ 118 */ +#define CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT(n) (103 + (n)) +#define CMDQ_EVENT_DISP1_OCIP_SUBSYS_SRAM_ISOINT_ENG_EVENT 119 +#define CMDQ_EVENT_DISP1_DISP_WDMA4_TARGET_LINE_END_ENG_EVENT 120 +#define CMDQ_EVENT_DISP1_DISP_WDMA4_SW_RST_DONE_ENG_EVENT 121 +#define CMDQ_EVENT_DISP1_DISP_WDMA3_TARGET_LINE_END_ENG_EVENT 122 +#define CMDQ_EVENT_DISP1_DISP_WDMA3_SW_RST_DONE_ENG_EVENT 123 +#define CMDQ_EVENT_DISP1_DISP_WDMA2_TARGET_LINE_END_ENG_EVENT 124 +#define CMDQ_EVENT_DISP1_DISP_WDMA2_SW_RST_DONE_ENG_EVENT 125 +#define CMDQ_EVENT_DISP1_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 126 +#define CMDQ_EVENT_DISP1_DISP_WDMA1_SW_RST_DONE_ENG_EVENT 127 +#define CMDQ_EVENT_DISP1_DISP_MUTEX0_TIMEOUT_ENG_EVENT 128 +#define CMDQ_EVENT_DISP1_DISP_MUTEX0_GET_RLZ_ENG_EVENT 129 +#define CMDQ_EVENT_DISP1_DISP_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 130 +#define CMDQ_EVENT_DISP1_DISP_GDMA0_SW_RST_DONE_ENG_EVENT 131 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_START_ENG_EVENT 132 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_END_ENG_EVENT 133 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VRR_VFP_LAST_SAFE_BLANK_ENG_EVENT 134 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_START_ENG_EVENT 135 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_LAST_LINE_ENG_EVENT 136 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VDE_END_ENG_EVENT 137 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TRIGGER_LOOP_CLR_ENG_EVENT 138 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE1_ENG_EVENT 139 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE0_ENG_EVENT 140 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_START_ENG_EVENT 141 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_END_ENG_EVENT 142 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_START_ENG_EVENT 143 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_END_ENG_EVENT 144 +/* CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT0 ~ 10: 145 ~ 155 */ +#define CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT(n) (145 + (n)) +/* CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT0 ~ 21: 156 ~ 177 */ +#define CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT(n) (156 + (n)) +/* CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT0 ~ 10: 178 ~ 188 */ +#define CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT(n) (178 + (n)) +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_START_ENG_EVENT 189 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_END_ENG_EVENT 190 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_START_ENG_EVENT 191 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_END_ENG_EVENT 192 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_TARGET_LINE_ENG_EVENT 193 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_START_ENG_EVENT 194 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_END_ENG_EVENT 195 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_START_ENG_EVENT 196 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_END_ENG_EVENT 197 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_TARGET_LINE_ENG_EVENT 198 +/* CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT0 ~ 10: 199 ~ 209 */ +#define CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT(n) (199 + (n)) +/* CMDQ_EVENT_MML0_STREAM_SOF0 ~ 15: 210 ~ 225 */ +#define CMDQ_EVENT_MML0_STREAM_SOF(n) (210 + (n)) +/* CMDQ_EVENT_MML0_FRAME_DONE_SEL0 ~ 15: 226 ~ 241 */ +#define CMDQ_EVENT_MML0_FRAME_DONE_SEL(n) (226 + (n)) +/* CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 242 ~ 257 */ +#define CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT(n) (242 + (n)) +#define CMDQ_EVENT_MML0_MDP_WROT2_SW_RST_DONE_ENG_EVENT 258 +#define CMDQ_EVENT_MML0_MDP_WROT1_SW_RST_DONE_ENG_EVENT 259 +#define CMDQ_EVENT_MML0_MDP_WROT0_SW_RST_DONE_ENG_EVENT 260 +#define CMDQ_EVENT_MML0_MDP_RROT0_SW_RST_DONE_ENG_EVENT 261 +#define CMDQ_EVENT_MML0_MDP_RDMA2_SW_RST_DONE_ENG_EVENT 262 +#define CMDQ_EVENT_MML0_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 263 +#define CMDQ_EVENT_MML0_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 264 +#define CMDQ_EVENT_MML0_MDP_MERGE0_SW_RST_DONE_ENG_EVENT 265 +#define CMDQ_EVENT_MML0_DISP_MUTEX0_TIMEOUT_ENG_EVENT 266 +#define CMDQ_EVENT_MML0_DISP_MUTEX0_GET_RLZ_ENG_EVENT 267 +/* CMDQ_EVENT_MML1_STREAM_SOF0 ~ 15: 268 ~ 283 */ +#define CMDQ_EVENT_MML1_STREAM_SOF(n) (268 + (n)) +/* CMDQ_EVENT_MML1_FRAME_DONE_SEL0 ~ 15: 284 ~ 299 */ +#define CMDQ_EVENT_MML1_FRAME_DONE_SEL(n) (284 + (n)) +/* CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 300 ~ 315 */ +#define CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT(n) (300 + (n)) +#define CMDQ_EVENT_MML1_MDP_WROT2_SW_RST_DONE_ENG_EVENT 316 +#define CMDQ_EVENT_MML1_MDP_WROT1_SW_RST_DONE_ENG_EVENT 317 +#define CMDQ_EVENT_MML1_MDP_WROT0_SW_RST_DONE_ENG_EVENT 318 +#define CMDQ_EVENT_MML1_MDP_RROT0_SW_RST_DONE_ENG_EVENT 319 +#define CMDQ_EVENT_MML1_MDP_RDMA2_SW_RST_DONE_ENG_EVENT 320 +#define CMDQ_EVENT_MML1_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 321 +#define CMDQ_EVENT_MML1_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 322 +#define CMDQ_EVENT_MML1_MDP_MERGE0_SW_RST_DONE_ENG_EVENT 323 +#define CMDQ_EVENT_MML1_DISP_MUTEX0_TIMEOUT_ENG_EVENT 324 +#define CMDQ_EVENT_MML1_DISP_MUTEX0_GET_RLZ_ENG_EVENT 325 +/* CMDQ_EVENT_OVL0_STREAM_SOF0 ~ 15: 326 ~ 341 */ +#define CMDQ_EVENT_OVL0_STREAM_SOF(n) (326 + (n)) +/* CMDQ_EVENT_OVL0_FRAME_DONE_SEL0 ~ 15: 342 ~ 357 */ +#define CMDQ_EVENT_OVL0_FRAME_DONE_SEL(n) (342 + (n)) +#define CMDQ_EVENT_OVL0_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT 358 +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_TIMEOUT_ENG_EVENT 359 +/* CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 360 ~ 375 */ +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n) (360 + (n)) +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_GET_RELEASE_ENG_EVENT 376 +#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 377 +#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 378 +#define CMDQ_EVENT_OVL0_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT 379 +#define CMDQ_EVENT_OVL0_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT 380 +#define CMDQ_EVENT_OVL0_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT 381 +#define CMDQ_EVENT_OVL0_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT 382 +#define CMDQ_EVENT_OVL0_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT 383 +#define CMDQ_EVENT_OVL0_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT 384 +#define CMDQ_EVENT_OVL0_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT 385 +#define CMDQ_EVENT_OVL0_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT 386 +#define CMDQ_EVENT_OVL0_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT 387 +#define CMDQ_EVENT_OVL0_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT 388 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 389 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT 390 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 391 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT 392 +#define CMDQ_EVENT_OVL0_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT 393 +/* CMDQ_EVENT_OVL1_STREAM_SOF0 ~ 15: 394 ~ 409 */ +#define CMDQ_EVENT_OVL1_STREAM_SOF(n) (394 + (n)) +/* CMDQ_EVENT_OVL1_FRAME_DONE_SEL0 ~ 15: 410 ~ 425 */ +#define CMDQ_EVENT_OVL1_FRAME_DONE_SEL(n) (410 + (n)) +#define CMDQ_EVENT_OVL1_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT 426 +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_TIMEOUT_ENG_EVENT 427 +/* CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 428 ~ 443 */ +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n) (428 + (n)) +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_GET_RELEASE_ENG_EVENT 444 +#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 445 +#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 446 +#define CMDQ_EVENT_OVL1_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT 447 +#define CMDQ_EVENT_OVL1_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT 448 +#define CMDQ_EVENT_OVL1_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT 449 +#define CMDQ_EVENT_OVL1_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT 450 +#define CMDQ_EVENT_OVL1_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT 451 +#define CMDQ_EVENT_OVL1_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT 452 +#define CMDQ_EVENT_OVL1_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT 453 +#define CMDQ_EVENT_OVL1_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT 454 +#define CMDQ_EVENT_OVL1_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT 455 +#define CMDQ_EVENT_OVL1_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT 456 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 457 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT 458 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 459 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT 460 +#define CMDQ_EVENT_OVL1_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT 461 +#define CMDQ_EVENT_DPC_DT_DONE0 462 +#define CMDQ_EVENT_DPC_DT_DONE1 463 +#define CMDQ_EVENT_DPC_DT_DONE2_0_MERGE 464 +#define CMDQ_EVENT_DPC_DT_DONE2_1_MERGE 465 +#define CMDQ_EVENT_DPC_DT_DONE2_2_MERGE 466 +#define CMDQ_EVENT_DPC_DT_DONE2_3_MERGE 467 +#define CMDQ_EVENT_DPC_DT_DONE3 468 +#define CMDQ_EVENT_DPC_DT_DONE4_MERGE 469 +#define CMDQ_EVENT_DPC_DT_DONE5 470 +#define CMDQ_EVENT_DPC_DT_DONE6_0_MERGE 471 +#define CMDQ_EVENT_DPC_DT_DONE6_1_MERGE 472 +#define CMDQ_EVENT_DPC_DT_DONE6_2_MERGE 473 +#define CMDQ_EVENT_DPC_DT_DONE6_3_MERGE 474 +#define CMDQ_EVENT_DPC_DT_DONE7 475 +#define CMDQ_EVENT_DPC_DT_DONE32_MERGE 476 +#define CMDQ_EVENT_DPC_DT_DONE33 477 +#define CMDQ_EVENT_DPC_DT_DONE34_0 478 +#define CMDQ_EVENT_DPC_DT_DONE35 479 +#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_ON_BEFORE_OFF 480 +#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_PRETE_BEFORE_ON 481 +#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_ON_BEFORE_OFF 482 +#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_PRETE_BEFORE_ON 483 +#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_ON_BEFORE_OFF 484 +#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_PRETE_BEFORE_ON 485 +#define CMDQ_EVENT_DPC_DISP_SW_CONFIG_WHEN_MTCMOS_OFF 486 +#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_ON_BEFORE_OFF 487 +#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_PRETE_BEFORE_ON 488 +#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_ON_BEFORE_OFF 489 +#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_PRETE_BEFORE_ON 490 +#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_ON_BEFORE_OFF 491 +#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_PRETE_BEFORE_ON 492 +#define CMDQ_EVENT_DPC_MML_SW_CONFIG_WHEN_MTCMOS_OFF 493 +/* CMDQ_EVENT_DPTX_DPTX_EVENT0 ~ 3: 494 ~ 497 */ +#define CMDQ_EVENT_DPTX_DPTX_EVENT(n) (494 + (n)) +/* CMDQ_EVENT_EDPTX_EDPTX_EVENT0 ~ 1: 498 ~ 499 */ +#define CMDQ_EVENT_EDPTX_EDPTX_EVENT(n) (498 + (n)) + +#define CMDQ_EVENT_DSI0_TE_I_DSI0_TE_I 898 +#define CMDQ_EVENT_DSI1_TE_I_DSI1_TE_I 899 +#define CMDQ_EVENT_DSI2_TE_I_DSI2_TE_I 900 +/* CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK0 ~ 23: 901 ~ 924 */ +#define CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK(n) (901 + (n)) +/* CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX0 ~ 1: 925 ~ 926 */ +#define CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX(n) (925 + (n)) +/* CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P10 ~ 1: 927 ~ 928 */ +#define CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P1(n) (927 + (n)) +/* CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX0 ~ 1: 929 ~ 930 */ +#define CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX(n) (929 + (n)) +#define CMDQ_EVENT_DSI3_TE_I_DSI3_TE_I 931 +#define CMDQ_EVENT_SPI0_FINISH_EVENT_DSI4_TE_I 932 +#define CMDQ_EVENT_SPI0_EVENT_EVENT_DSI5_TE_I 933 + +/* + * GCE1 Hardware Event IDs + * Different SoCs will have varying numbers of hardware event signals, + * which are sent from the corresponding hardware to the GCE. + * Each hardware event signal corresponds to an event ID in the GCE. + * The CMDQ driver can use the following event ID definitions to allow + * the client driver to use wait and clear APIs provided by CMDQ, enabling + * the GCE to execute operations in the instructions for that event ID. + * + * The event IDs of GCE1 are mainly used by non-display hardware. + */ +#define CMDQ_EVENT_VENC3_VENC_RESERVED 0 +#define CMDQ_EVENT_VENC3_VENC_FRAME_DONE 1 +#define CMDQ_EVENT_VENC3_VENC_PAUSE_DONE 2 +#define CMDQ_EVENT_VENC3_JPGENC_DONE 3 +#define CMDQ_EVENT_VENC3_VENC_MB_DONE 4 +#define CMDQ_EVENT_VENC3_VENC_128BYTE_DONE 5 +#define CMDQ_EVENT_VENC3_JPGDEC_DONE 6 +#define CMDQ_EVENT_VENC3_JPGDEC_C1_DONE 7 +#define CMDQ_EVENT_VENC3_JPGDEC_INSUFF_DONE 8 +#define CMDQ_EVENT_VENC3_JPGDEC_C1_INSUFF_DONE 9 +#define CMDQ_EVENT_VENC3_WP_2ND_STAGE_DONE 10 +#define CMDQ_EVENT_VENC3_WP_3RD_STAGE_DONE 11 +#define CMDQ_EVENT_VENC3_PPS_HEADER_DONE 12 +#define CMDQ_EVENT_VENC3_SPS_HEADER_DONE 13 +#define CMDQ_EVENT_VENC3_VPS_HEADER_DONE 14 +#define CMDQ_EVENT_VENC3_VENC_SLICE_DONE 15 +#define CMDQ_EVENT_VENC3_VENC_SOC_SLICE_DONE 16 +#define CMDQ_EVENT_VENC3_VENC_SOC_FRAME_DONE 17 + +#define CMDQ_EVENT_VENC2_VENC_FRAME_DONE 33 +#define CMDQ_EVENT_VENC2_VENC_PAUSE_DONE 34 +#define CMDQ_EVENT_VENC2_JPGENC_DONE 35 +#define CMDQ_EVENT_VENC2_VENC_MB_DONE 36 +#define CMDQ_EVENT_VENC2_VENC_128BYTE_DONE 37 +#define CMDQ_EVENT_VENC2_JPGDEC_DONE 38 +#define CMDQ_EVENT_VENC2_JPGDEC_C1_DONE 39 +#define CMDQ_EVENT_VENC2_JPGDEC_INSUFF_DONE 40 +#define CMDQ_EVENT_VENC2_JPGDEC_C1_INSUFF_DONE 41 +#define CMDQ_EVENT_VENC2_WP_2ND_STAGE_DONE 42 +#define CMDQ_EVENT_VENC2_WP_3RD_STAGE_DONE 43 +#define CMDQ_EVENT_VENC2_PPS_HEADER_DONE 44 +#define CMDQ_EVENT_VENC2_SPS_HEADER_DONE 45 +#define CMDQ_EVENT_VENC2_VPS_HEADER_DONE 46 +#define CMDQ_EVENT_VENC2_VENC_SLICE_DONE 47 +#define CMDQ_EVENT_VENC2_VENC_SOC_SLICE_DONE 48 +#define CMDQ_EVENT_VENC2_VENC_SOC_FRAME_DONE 49 + +#define CMDQ_EVENT_VENC1_VENC_FRAME_DONE 65 +#define CMDQ_EVENT_VENC1_VENC_PAUSE_DONE 66 +#define CMDQ_EVENT_VENC1_JPGENC_DONE 67 +#define CMDQ_EVENT_VENC1_VENC_MB_DONE 68 +#define CMDQ_EVENT_VENC1_VENC_128BYTE_DONE 69 +#define CMDQ_EVENT_VENC1_JPGDEC_DONE 70 +#define CMDQ_EVENT_VENC1_JPGDEC_C1_DONE 71 +#define CMDQ_EVENT_VENC1_JPGDEC_INSUFF_DONE 72 +#define CMDQ_EVENT_VENC1_JPGDEC_C1_INSUFF_DONE 73 +#define CMDQ_EVENT_VENC1_WP_2ND_STAGE_DONE 74 +#define CMDQ_EVENT_VENC1_WP_3RD_STAGE_DONE 75 +#define CMDQ_EVENT_VENC1_PPS_HEADER_DONE 76 +#define CMDQ_EVENT_VENC1_SPS_HEADER_DONE 77 +#define CMDQ_EVENT_VENC1_VPS_HEADER_DONE 78 +#define CMDQ_EVENT_VENC1_VENC_SLICE_DONE 79 +#define CMDQ_EVENT_VENC1_VENC_SOC_SLICE_DONE 80 +#define CMDQ_EVENT_VENC1_VENC_SOC_FRAME_DONE 81 + +#define CMDQ_EVENT_VDEC1_VDEC_LINE_CNT_INT 192 +#define CMDQ_EVENT_VDEC1_VDEC_INT 193 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_2 194 +#define CMDQ_EVENT_VDEC1_VDEC_DEC_ERR 195 +#define CMDQ_EVENT_VDEC1_VDEC_BUSY_OVERFLOW 196 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_5 197 +#define CMDQ_EVENT_VDEC1_VDEC_INI_FETCH_RDY 198 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_7 199 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_8 200 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_9 201 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_10 202 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_11 203 + +#define CMDQ_EVENT_VDEC1_VDEC_GCE_CNT_OP_THR 207 + +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_32 224 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_INT 225 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_34 226 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_DEC_ERR 227 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_BUSY_OVERFLOW 228 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_37 229 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_INI_FETCH_RDY 230 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_39 231 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_40 232 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_41 233 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_42 234 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_43 235 + +#define CMDQ_EVENT_VDEC1_VDEC_LAT_GCE_CNT_OP_THR 239 + +#define CMDQ_EVENT_IMG_IMG_EVENT_0 256 +/* CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0_0 ~ 5: 257 ~ 262 */ +#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0(n) (257 + (n)) +#define CMDQ_EVENT_IMG_TRAW0_DMA_ERR_EVENT 263 +#define CMDQ_EVENT_IMG_TRAW0_DUMMY_0 264 +/* CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0_0 ~ 5: 265 ~ 270 */ +#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0(n) (265 + (n)) +#define CMDQ_EVENT_IMG_TRAW1_DMA_ERR_EVENT 271 +#define CMDQ_EVENT_IMG_ADL_TILE_DONE_EVENT 272 +#define CMDQ_EVENT_IMG_ADLWR0_TILE_DONE_EVENT 273 +#define CMDQ_EVENT_IMG_ADLWR1_TILE_DONE_EVENT 274 +#define CMDQ_EVENT_IMG_IMGSYS_IPE_ME_DONE 275 +#define CMDQ_EVENT_IMG_IMGSYS_IPE_MMG_DONE 276 +/* CMDQ_EVENT_IMG_QOF_ACK_EVENT0 ~ 19: 277 ~ 296 */ +#define CMDQ_EVENT_IMG_QOF_ACK_EVENT(n) (277 + (n)) +/* CMDQ_EVENT_IMG_QOF_ON_EVENT0 ~ 4: 297 ~ 301 */ +#define CMDQ_EVENT_IMG_QOF_ON_EVENT(n) (297 + (n)) +/* CMDQ_EVENT_IMG_QOF_OFF_EVENT0 ~ 4: 302 ~ 306 */ +#define CMDQ_EVENT_IMG_QOF_OFF_EVENT(n) (302 + (n)) +/* CMDQ_EVENT_IMG_QOF_SAVE_EVENT0 ~ 4: 307 ~ 311 */ +#define CMDQ_EVENT_IMG_QOF_SAVE_EVENT(n) (307 + (n)) +/* CMDQ_EVENT_IMG_QOF_RESTORE_EVENT0 ~ 4: 312 ~ 316 */ +#define CMDQ_EVENT_IMG_QOF_RESTORE_EVENT(n) (312 + (n)) +/* CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P20~5: 317 ~ 322 */ +#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P2(n) (317 + (n)) +#define CMDQ_EVENT_IMG_DIP_DMA_ERR_EVENT 323 +#define CMDQ_EVENT_IMG_DIP_NR_DMA_ERR_EVENT 324 +#define CMDQ_EVENT_IMG_DIP_DUMMY_0 325 +#define CMDQ_EVENT_IMG_WPE_EIS_GCE_FRAME_DONE 326 +#define CMDQ_EVENT_IMG_WPE_EIS_DONE_SYNC_OUT 327 +/* CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P20 ~ 5: 328 ~ 333 */ +#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P2(n) (328 + (n)) +/* CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P20 ~ 5: 334 ~ 339 */ +#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P2(n) (334 + (n)) +#define CMDQ_EVENT_IMG_PQA_DMA_ERR_EVENT 340 +/* CMDQ_EVENT_IMG_WPE0_DUMMY0~2: 341 ~ 343 */ +#define CMDQ_EVENT_IMG_WPE0_DUMMY(n) (341 + (n)) +#define CMDQ_EVENT_IMG_OMC_TNR_GCE_FRAME_DONE 344 +#define CMDQ_EVENT_IMG_OMC_TNR_DONE_SYNC_OUT 345 +/* CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P20 ~ 5: 346 ~ 351 */ +#define CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P2(n) (346 + (n)) +/* CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P20 ~ 5: 352 ~ 357 */ +#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P2(n) (352 + (n)) +#define CMDQ_EVENT_IMG_PQB_DMA_ERR_EVENT 358 +/* CMDQ_EVENT_IMG_WPE1_DUMMY0 ~ 2: 359 ~ 361 */ +#define CMDQ_EVENT_IMG_WPE1_DUMMY(n) (359 + (n)) +#define CMDQ_EVENT_IMG_WPE_LITE_GCE_FRAME_DONE 362 +#define CMDQ_EVENT_IMG_WPE_LITE_DONE_SYNC_OUT 363 +/* CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P20 ~ 5: 364 ~ 369 */ +#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P2(n) (364 + (n)) +#define CMDQ_EVENT_IMG_OMC_LITE_GCE_FRAME_DONE 370 +#define CMDQ_EVENT_IMG_OMC_LITE_DONE_SYNC_OUT 371 +/* CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P20 ~ 5: 372 ~ 377 */ +#define CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P2(n) (372 + (n)) +/* CMDQ_EVENT_IMG_WPE2_DUMMY0 ~ 2: 378 ~ 380 */ +#define CMDQ_EVENT_IMG_WPE2_DUMMY(n) (378 + (n)) +#define CMDQ_EVENT_IMG_IMGSYS_IPE_FDVT0_DONE 381 +#define CMDQ_EVENT_IMG_IMG_EVENT_126 382 +#define CMDQ_EVENT_IMG_IMG_EVENT_127 383 +#define CMDQ_EVENT_CAM_CAM_EVENT_0 384 +#define CMDQ_EVENT_CAM_CAM_SUBA_SW_PASS1_DONE 385 +#define CMDQ_EVENT_CAM_CAM_SUBB_SW_PASS1_DONE 386 +#define CMDQ_EVENT_CAM_CAM_SUBC_SW_PASS1_DONE 387 +#define CMDQ_EVENT_CAM_CAM_SUBA_TFMR_PASS1_DONE 388 +#define CMDQ_EVENT_CAM_CAM_SUBB_TFMR_PASS1_DONE 389 +#define CMDQ_EVENT_CAM_CAM_SUBC_TFMR_PASS1_DONE 390 +/* CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE0 ~ 3: 391 ~ 394 */ +#define CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE(n) (391 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE0 ~ 3: 395 ~ 398 */ +#define CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE(n) (395 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE0 ~ 3: 399 + 402 */ +#define CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE(n) (399 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE0 ~ 3: 403 ~ 406 */ +#define CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE(n) (403 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE0 ~ 3: 407 ~ 409 */ +#define CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE(n) (407 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE0 ~ 3: 411 ~ 413 */ +#define CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE(n) (411 + (n)) +#define CMDQ_EVENT_CAM_MRAW0_SW_PASS1_DONE 415 +#define CMDQ_EVENT_CAM_MRAW1_SW_PASS1_DONE 416 +#define CMDQ_EVENT_CAM_MRAW2_SW_PASS1_DONE 417 +#define CMDQ_EVENT_CAM_MRAW3_SW_PASS1_DONE 418 +#define CMDQ_EVENT_CAM_UISP_SW_PASS1_DONE 419 +#define CMDQ_EVENT_CAM_TG_MRAW0_OUT_SOF 420 +#define CMDQ_EVENT_CAM_TG_MRAW1_OUT_SOF 421 +#define CMDQ_EVENT_CAM_TG_MRAW2_OUT_SOF 422 +#define CMDQ_EVENT_CAM_TG_MRAW3_OUT_SOF 423 +#define CMDQ_EVENT_CAM_PDA0_IRQO_EVENT_DONE_D1 424 +#define CMDQ_EVENT_CAM_PDA1_IRQO_EVENT_DONE_D1 425 +#define CMDQ_EVENT_CAM_DPE_DVP_CMQ_EVENT 426 +#define CMDQ_EVENT_CAM_DPE_DVS_CMQ_EVENT 427 +#define CMDQ_EVENT_CAM_DPE_DVFG_CMQ_EVENT 428 +#define CMDQ_EVENT_CAM_CAM_EVENT_45 429 +#define CMDQ_EVENT_CAM_CAM_EVENT_46 430 +#define CMDQ_EVENT_CAM_CAM_EVENT_47 431 +#define CMDQ_EVENT_CAM_CAM_EVENT_48 432 +/* CMDQ_EVENT_CAM_CAM_SUBA_TG_INT1 ~ 4: 433 ~ 436 */ +#define CMDQ_EVENT_CAM_CAM_SUBA_TG_INT(n) (433 + (n) - 1) +/* CMDQ_EVENT_CAM_CAM_SUBB_TG_INT1 ~ 4: 437 ~ 440 */ +#define CMDQ_EVENT_CAM_CAM_SUBB_TG_INT(n) (437 + (n) - 1) +/* CMDQ_EVENT_CAM_CAM_SUBC_TG_INT1 ~ 4: 441 ~ 444 */ +#define CMDQ_EVENT_CAM_CAM_SUBC_TG_INT(n) (441 + (n) - 1) +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBA 445 +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBB 446 +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBC 447 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBA 448 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBB 449 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBC 450 +#define CMDQ_EVENT_CAM_RAW_SEL_SOF_UISP 451 +#define CMDQ_EVENT_CAM_CAM_SUBA_RING_BUFFER_OVERFLOW_INT_IN 452 +#define CMDQ_EVENT_CAM_CAM_SUBB_RING_BUFFER_OVERFLOW_INT_IN 453 +#define CMDQ_EVENT_CAM_CAM_SUBC_RING_BUFFER_OVERFLOW_INT_IN 454 +#define CMDQ_EVENT_CAM_CAM_EVENT_71 455 +#define CMDQ_EVENT_CAM_ADL_WR_FRAME_DONE 456 +#define CMDQ_EVENT_CAM_ADL_RD_FRAME_DONE 457 +#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_ON_EVENT 458 +#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_ON_EVENT 459 +#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_ON_EVENT 460 +#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_OFF_EVENT 461 +#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_OFF_EVENT 462 +#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_OFF_EVENT 463 +#define CMDQ_EVENT_CAM_QOF_RAWA_SAVE_EVENT 464 +#define CMDQ_EVENT_CAM_QOF_RAWB_SAVE_EVENT 465 +#define CMDQ_EVENT_CAM_QOF_RAWC_SAVE_EVENT 466 +#define CMDQ_EVENT_CAM_QOF_RAWA_RESTORE_EVENT 467 +#define CMDQ_EVENT_CAM_QOF_RAWB_RESTORE_EVENT 468 +#define CMDQ_EVENT_CAM_QOF_RAWC_RESTORE_EVENT 469 +/* CMDQ_EVENT_CAM_QOF_CAM_EVENT0 ~ 11: 470 ~ 481 */ +#define CMDQ_EVENT_CAM_QOF_CAM_EVENT(n) (470 + (n)) +/* CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT0 ~ 11: 482 ~ 495 */ +#define CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT(n) (482 + (n)) +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_NON_SEC_IRQ 496 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_SEC_IRQ 497 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_VM_IRQ 498 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_EXCH_VM_IRQ 499 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_NON_SEC_IRQ 500 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_SEC_IRQ 501 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_VM_IRQ 502 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_EXCH_VM_IRQ 503 +/* CMDQ_EVENT_CAM_I2C_CH2_EVENT0 ~ 4: 504 ~ 509 */ +#define CMDQ_EVENT_CAM_I2C_CH2_EVENT(n) (504 + (n)) +#define CMDQ_EVENT_CAM_CAM_EVENT_125 509 +#define CMDQ_EVENT_CAM_CAM_EVENT_126 510 +#define CMDQ_EVENT_CAM_CAM_EVENT_127 511 + +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MMSRAM_COMM_SMIASSER 898 +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MDP_COMM_SMIASSER 899 +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_DISP_COMM_SMIASSER 900 + +/* + * GCE Software Tokens + * Apart from the event IDs that are already bound to hardware event signals, + * the remaining event IDs can be used as software tokens. + * This allows the client driver to name and operate them independently, + * and their usage is the same as that of hardware events. + */ +/* Begin of GCE0 software token */ +/* Config thread notify trigger thread */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY 640 +/* Trigger thread notify config thread */ +#define CMDQ_SYNC_TOKEN_STREAM_EOF 641 +/* Block Trigger thread until the ESD check finishes */ +#define CMDQ_SYNC_TOKEN_ESD_EOF 642 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK 643 +/* Check CABC setup finish */ +#define CMDQ_SYNC_TOKEN_CABC_EOF 644 +/* VFP period token for Msync */ +#define CMDQ_SYNC_TOKEN_VFP_PERIOD 645 +/* Software sync token for dual display */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_1 694 +#define CMDQ_SYNC_TOKEN_STREAM_EOF_1 695 +#define CMDQ_SYNC_TOKEN_ESD_EOF_1 696 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_1 697 +#define CMDQ_SYNC_TOKEN_CABC_EOF_1 698 + +/* + * GPR access tokens (for HW register backup) + * There are 15 32-bit GPR, form 3 GPR as a set + * (64-bit for address, 32-bit for value) + * + * CMDQ_SYNC_TOKEN_GPR_SET0 ~ 4: 700 ~ 704 + */ +#define CMDQ_SYNC_TOKEN_GPR_SET(n) (700 + (n)) +#define CMDQ_SYNC_TOKEN_TE_0 705 +#define CMDQ_SYNC_TOKEN_PREFETCH_TE_0 706 +#define CMDQ_SYNC_TOKEN_VIDLE_POWER_ON 707 +#define CMDQ_SYNC_TOKEN_CHECK_TRIGGER_MERGE 708 + +/* Resource lock event to control resource in GCE thread */ +#define CMDQ_SYNC_RESOURCE_WROT0 710 +#define CMDQ_SYNC_RESOURCE_WROT1 711 +/* Hardware TRACE software token */ +#define CMDQ_SYNC_TOKEN_HW_TRACE_WAIT 712 +#define CMDQ_SYNC_TOKEN_HW_TRACE_LOCK 713 +/* Software sync token for dual display */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_3 714 +#define CMDQ_SYNC_TOKEN_STREAM_EOF_3 715 +#define CMDQ_SYNC_TOKEN_ESD_EOF_3 716 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_3 717 +#define CMDQ_SYNC_TOKEN_CABC_EOF_3 718 +/* End of GCE0 software token */ + +/* Begin of GCE1 software token */ +/* CMDQ_SYNC_TOKEN_IMGSYS_POOL0 ~ 300: 512 ~ 812 */ +#define CMDQ_SYNC_TOKEN_IMGSYS_POOL(n) (512 + (n)) +/* ISP software token */ +#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_EIS 813 +#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_TNR 814 +#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_LITE 815 +#define CMDQ_SYNC_TOKEN_IMGSYS_TRAW 816 +#define CMDQ_SYNC_TOKEN_IMGSYS_LTRAW 817 +#define CMDQ_SYNC_TOKEN_IMGSYS_XTRAW 818 +#define CMDQ_SYNC_TOKEN_IMGSYS_DIP 819 +#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_A 820 +#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_B 821 +#define CMDQ_SYNC_TOKEN_IPESYS_ME 822 +#define CMDQ_SYNC_TOKEN_APUSYS_APU 823 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_TRAW 824 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_LTRAW 825 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_XTRAW 826 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_DIP 827 +#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_LITE 828 +/* IMG software token for QoS */ +#define CMDQ_SYNC_TOKEN_IMGSYS_QOS_LOCK 829 +/* IMG software token for Qof */ +#define CMDQ_SYNC_TOKEN_DIP_POWER_CTRL 830 +#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_ON 831 +#define CMDQ_SYNC_TOKEN_DIP_PWR_ON 832 +#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_OFF 833 +#define CMDQ_SYNC_TOKEN_DIP_PWR_OFF 834 +#define CMDQ_SYNC_TOKEN_DIP_PWR_HAND_SHAKE 835 +#define CMDQ_SYNC_TOKEN_TRAW_POWER_CTRL 836 +#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_ON 837 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_ON 838 +#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_OFF 839 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_OFF 840 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_HAND_SHAKE 841 +/* End of GCE1 software token */ + +/* Begin of common software token */ +/* + * Notify normal CMDQ there are some secure task done + * MUST NOT CHANGE, this token sync with secure world + */ +#define CMDQ_SYNC_SECURE_THR_EOF 940 +/* CMDQ use software token */ +#define CMDQ_SYNC_TOKEN_USER_0 941 +#define CMDQ_SYNC_TOKEN_USER_1 942 +#define CMDQ_SYNC_TOKEN_POLL_MONITOR 943 +#define CMDQ_SYNC_TOKEN_TPR_LOCK 942 +/* TZMP software token */ +#define CMDQ_SYNC_TOKEN_TZMP_DISP_WAIT 943 +#define CMDQ_SYNC_TOKEN_TZMP_DISP_SET 944 +#define CMDQ_SYNC_TOKEN_TZMP_ISP_WAIT 945 +#define CMDQ_SYNC_TOKEN_TZMP_ISP_SET 946 +#define CMDQ_SYNC_TOKEN_TZMP_AIE_WAIT 947 +#define CMDQ_SYNC_TOKEN_TZMP_AIE_SET 948 +#define CMDQ_SYNC_TOKEN_TZMP_ADL_WAIT 949 +#define CMDQ_SYNC_TOKEN_TZMP_ADL_SET 950 +/* PREBUILT software token */ +#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_LOCK 951 +#define CMDQ_SYNC_TOKEN_PREBUILT_MML_LOCK 952 +#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_LOCK 953 +#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_LOCK 954 +#define CMDQ_SYNC_TOKEN_DISP_VA_START 955 +#define CMDQ_SYNC_TOKEN_DISP_VA_END 956 + +/* + * Event for GPR timer, used in sleep and poll with timeout + * + * CMDQ_TOKEN_GPR_TIMER_R0~15: 994 ~ 1009 + */ +#define CMDQ_TOKEN_GPR_TIMER_R(n) (994 + (n)) +/* End of common software token */ + +#endif diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index c8418888268d..b5dd5ef9fa11 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -284,6 +284,11 @@ }; }; +&gpu { + mali-supply = <&mt6357_vcore_reg>; + status = "okay"; +}; + &i2c0 { clock-frequency = <100000>; pinctrl-0 = <&i2c0_pins>; @@ -353,6 +358,10 @@ }; }; +&mfg { + domain-supply = <&mt6357_vsram_others_reg>; +}; + &mmc0 { assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index e6d2b3221a3b..a5ca3cda6ef3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -267,6 +267,26 @@ clock-output-names = "clk26m"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <650000>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-microvolt = <700000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -292,6 +312,27 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt8365-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + gpu: gpu@13040000 { + compatible = "mediatek,mt8365-mali", "arm,mali-bifrost"; + reg = <0 0x13040000 0 0x4000>; + + clocks = <&mfgcfg CLK_MFG_BG3D>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "job", "mmu", "gpu", "event"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&spm MT8365_POWER_DOMAIN_MFG>; + status = "disabled"; + }; + topckgen: syscon@10000000 { compatible = "mediatek,mt8365-topckgen", "syscon"; reg = <0 0x10000000 0 0x1000>; @@ -398,7 +439,7 @@ mediatek,infracfg = <&infracfg>; }; - power-domain@MT8365_POWER_DOMAIN_MFG { + mfg: power-domain@MT8365_POWER_DOMAIN_MFG { reg = <MT8365_POWER_DOMAIN_MFG>; clocks = <&topckgen CLK_TOP_MFG_SEL>; clock-names = "mfg"; diff --git a/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts new file mode 100644 index 000000000000..92ff80e60974 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Bartosz Bilas <bartosz.bilas@grinn-global.com> + */ +/dts-v1/; + +#include "mt8370.dtsi" +#include "mt8390-grinn-genio-som.dtsi" +#include "mt8390-grinn-genio-sbc.dtsi" + +/ { + model = "Grinn GenioSBC-510"; + compatible = "grinn,genio-510-sbc", "mediatek,mt8370", "mediatek,mt8188"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts new file mode 100644 index 000000000000..4931d761bd1f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza <mateusz.koza@grinn-global.com> + */ +/dts-v1/; + +#include "mt8188.dtsi" +#include "mt8390-grinn-genio-som.dtsi" +#include "mt8390-grinn-genio-sbc.dtsi" + +/ { + model = "Grinn GenioSBC-700"; + compatible = "grinn,genio-700-sbc", "mediatek,mt8390", "mediatek,mt8188"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi new file mode 100644 index 000000000000..888248a75e93 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi @@ -0,0 +1,538 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza <mateusz.koza@grinn-global.com> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + chassis-type = "embedded"; + + aliases { + ethernet0 = ð + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + apu_mem: memory@55000000 { + compatible = "shared-dma-pool"; + reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ + }; + + vpu_mem: memory@57000000 { + compatible = "shared-dma-pool"; + reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + }; + + reg_sbc_vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + reg_fixed_5v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; + + reg_fixed_4v2: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-4v2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; + + reg_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; +}; + +&pio { + gpio-line-names = + /* 0 - 4 */ "RPI_GPIO0", "RPI_GPIO1", "", "", "RPI_GPIO4", + /* 5 - 9 */ "", "RPI_GPIO6", "", "", "RPI_GPIO9", + /* 10 - 14 */ "RPI_GPIO10", "RPI_GPIO11", "", "", "", + /* 15 - 19 */ "", "", "", "", "", + /* 20 - 24 */ "", "RPI_GPIO21", "", "RPI_GPIO23", "", + /* 25 - 29 */ "", "", "", "", "", + /* 30 - 34 */ "RPI_GPIO30", "", "", "", "", + /* 35 - 39 */ "RPI_GPIO35", "RPI_GPIO36", "", "", "", + /* 40 - 44 */ "", "", "", "", "", + /* 45 - 49 */ "", "", "", "", "", + /* 50 - 54 */ "", "", "", "", "", + /* 55 - 59 */ "RPI_GPIO55", "RPI_GPIO56", "", "", "RPI_GPIO59", + /* 60 - 64 */ "RPI_GPIO60", "", "", "", "", + /* 65 - 69 */ "", "", "", "", "RPI_GPIO69", + /* 70 - 74 */ "", "", "RPI_GPIO72", "RPI_GPIO73", "RPI_GPIO74", + /* 75 - 79 */ "", "", "", "", "RPI_GPIO79", + /* 80 - 84 */ "RPI_GPIO80", "RPI_GPIO81", "RPI_GPIO82", "", "", + /* 85 - 89 */ "", "", "", "", "", + /* 90 - 94 */ "", "", "", "", "", + /* 95 - 99 */ "", "", "", "", "", + /*100 - 104 */ "", "", "", "", "", + /*105 - 109 */ "", "", "", "", "", + /*110 - 114 */ "", "", "", "", "", + /*115 - 119 */ "", "", "", "", "", + /*120 - 124 */ "", "RPI_GPIO121", "RPI_GPIO122", "RPI_GPIO123", "RPI_GPIO124"; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c5_pins: i2c5-pins { + pins { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO86__FUNC_O_UTXD1>, + <PINMUX_GPIO87__FUNC_I1_URXD1>; + bias-pull-up; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>, + <PINMUX_GPIO36__FUNC_I1_URXD2>; + bias-pull-up; + }; + }; + + pcie_pins_default: pcie-default { + mux { + pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>, + <PINMUX_GPIO48__FUNC_O_PERSTN>, + <PINMUX_GPIO49__FUNC_B1_CLKREQN>; + bias-pull-up; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>, + <PINMUX_GPIO140__FUNC_I0_GBE_RXC>, + <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>, + <PINMUX_GPIO142__FUNC_O_GBE_TXEN>; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>, + <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>; + drive-strength = <8>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>, + <PINMUX_GPIO146__FUNC_B_GPIO146>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>, + <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>, + <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>, + <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>; + drive-strength = <8>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>, + <PINMUX_GPIO132__FUNC_O_GBE_TXD2>, + <PINMUX_GPIO133__FUNC_O_GBE_TXD1>, + <PINMUX_GPIO134__FUNC_O_GBE_TXD0>; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>, + <PINMUX_GPIO140__FUNC_B_GPIO140>, + <PINMUX_GPIO141__FUNC_B_GPIO141>, + <PINMUX_GPIO142__FUNC_B_GPIO142>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>, + <PINMUX_GPIO144__FUNC_B_GPIO144>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>, + <PINMUX_GPIO136__FUNC_B_GPIO136>, + <PINMUX_GPIO137__FUNC_B_GPIO137>, + <PINMUX_GPIO138__FUNC_B_GPIO138>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>, + <PINMUX_GPIO132__FUNC_B_GPIO132>, + <PINMUX_GPIO133__FUNC_B_GPIO133>, + <PINMUX_GPIO134__FUNC_B_GPIO134>; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO121__FUNC_B0_PCM_CLK>, + <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>, + <PINMUX_GPIO123__FUNC_O_PCM_DO>, + <PINMUX_GPIO124__FUNC_I0_PCM_DI>; + }; + }; + + usb_default_pins: usb-default-pins { + pins-valid { + pinmux = <PINMUX_GPIO85__FUNC_I0_VBUSVALID>; + input-enable; + }; + }; +}; + +ð { + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + mediatek,mac-wol; + mediatek,tx-delay-ps = <30>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 200000>; + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +ð_mdio { + ethernet_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>; + eee-broken-1000t; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins_default>; + status = "okay"; +}; + +&pciephy { + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&xhci1 { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_fixed_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_fixed_3v3>; + }; +}; + +&xhci2 { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + hub@1 { + compatible = "microchip,usb2513bi"; + reg = <1>; + vdd-supply = <®_fixed_3v3>; + }; +}; + +&ssusb0 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_default_pins>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb2 { + dr_mode = "host"; + maximum-speed = "high-speed"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&scp_cluster { + status = "okay"; +}; + +&scp_c0 { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&gpu { + mali-supply = <&mt6359_vproc2_buck_reg>; + status = "okay"; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + +&sound { + compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb"; + model = "mt8390-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R", + "AP DMIC", "AUDGLB", + "AP DMIC", "MIC_BIAS_0", + "AP DMIC", "MIC_BIAS_2", + "DMIC_INPUT", "AP DMIC"; + + mediatek,adsp = <&adsp>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi new file mode 100644 index 000000000000..8da47c916313 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza <mateusz.koza@grinn-global.com> + */ + +#include "mt6359.dtsi" +#include <dt-bindings/input/input.h> + +/ { + aliases { + i2c1 = &i2c1; + mmc0 = &mmc0; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mfg0 { + domain-supply = <&mt6359_vproc2_buck_reg>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn18_ldo_reg { + regulator-name = "vcn18_pmu"; + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-name = "vcn33_2_pmu"; + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-name = "dvdd_proc_l"; + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-name = "dvdd_core"; + regulator-always-on; +}; + +&mt6359_vpa_buck_reg { + regulator-name = "vpa_pmu"; + regulator-max-microvolt = <3100000>; +}; + +&mt6359_vproc2_buck_reg { + /* The name "vgpu" is required by mtk-regulator-coupler */ + regulator-name = "vgpu"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vpu_buck_reg { + regulator-name = "dvdd_adsp"; + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-name = "va12_abb2_pmu"; + regulator-always-on; +}; + +&mt6359_vsim1_ldo_reg { + regulator-name = "vsim1_pmu"; + regulator-enable-ramp-delay = <480>; +}; + +&mt6359_vsram_others_ldo_reg { + /* The name "vsram_gpu" is required by mtk-regulator-coupler */ + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vproc2_buck_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vufs_ldo_reg { + regulator-name = "vufs18_pmu"; + regulator-always-on; +}; + +&pio { + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts new file mode 100644 index 000000000000..e09a3ecd8773 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Ramax Lo <ramax.lo@mediatek.com> + * Macpaul Lin <macpaul.lin@mediatek.com> + */ +/dts-v1/; + +#include "mt8395-genio-common.dtsi" + +/ { + model = "MediaTek Genio 1200 EVK-P1V2-UFS"; + compatible = "mediatek,mt8395-evk-ufs", "mediatek,mt8395", + "mediatek,mt8195"; +}; + +&ufshci { + status = "okay"; + vcc-supply = <&mt6359_vemc_1_ldo_reg>; + vccq2-supply = <&mt6359_vufs_ldo_reg>; +}; + +&ufsphy { + status = "okay"; +}; + +&mmc0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index cf8cd37f5708..68455f28c246 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -6,1197 +6,10 @@ */ /dts-v1/; -#include "mt8195.dtsi" -#include "mt6359.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/mt8195-pinfunc.h> -#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> -#include <dt-bindings/spmi/spmi.h> -#include <dt-bindings/usb/pd.h> +#include "mt8395-genio-common.dtsi" / { model = "MediaTek Genio 1200 EVK-P1V2-EMMC"; compatible = "mediatek,mt8395-evk", "mediatek,mt8395", "mediatek,mt8195"; - - aliases { - serial0 = &uart0; - ethernet0 = ð - }; - - chosen { - stdout-path = "serial0:921600n8"; - }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0x2 0x00000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * 12 MiB reserved for OP-TEE (BL32) - * +-----------------------+ 0x43e0_0000 - * | SHMEM 2MiB | - * +-----------------------+ 0x43c0_0000 - * | | TA_RAM 8MiB | - * + TZDRAM +--------------+ 0x4340_0000 - * | | TEE_RAM 2MiB | - * +-----------------------+ 0x4320_0000 - */ - optee_reserved: optee@43200000 { - no-map; - reg = <0 0x43200000 0 0x00c00000>; - }; - - scp_mem: memory@50000000 { - compatible = "shared-dma-pool"; - reg = <0 0x50000000 0 0x2900000>; - no-map; - }; - - vpu_mem: memory@53000000 { - compatible = "shared-dma-pool"; - reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ - }; - - /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ - bl31_secmon_mem: memory@54600000 { - no-map; - reg = <0 0x54600000 0x0 0x200000>; - }; - - adsp_mem: memory@60000000 { - compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0xf00000>; - no-map; - }; - - afe_dma_mem: memory@60f00000 { - compatible = "shared-dma-pool"; - reg = <0 0x60f00000 0 0x100000>; - no-map; - }; - - adsp_dma_mem: memory@61000000 { - compatible = "shared-dma-pool"; - reg = <0 0x61000000 0 0x100000>; - no-map; - }; - - apu_mem: memory@62000000 { - compatible = "shared-dma-pool"; - reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ - }; - }; - - backlight_lcm0: backlight-lcm0 { - compatible = "pwm-backlight"; - brightness-levels = <0 1023>; - default-brightness-level = <576>; - num-interpolated-steps = <1023>; - pwms = <&disp_pwm0 0 500000>; - }; - - backlight_lcd1: backlight-lcd1 { - compatible = "pwm-backlight"; - pwms = <&disp_pwm1 0 500000>; - enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; - brightness-levels = <0 1023>; - num-interpolated-steps = <1023>; - default-brightness-level = <576>; - status = "disabled"; - }; - - can_clk: can-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <20000000>; - clock-output-names = "can-clk"; - }; - - edp_panel_fixed_3v3: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "edp_panel_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_panel_3v3_en_pins>; - }; - - edp_panel_fixed_12v: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "edp_backlight_12v"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - gpio = <&pio 96 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_panel_12v_en_pins>; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - - button-volume-up { - wakeup-source; - debounce-interval = <100>; - gpios = <&pio 106 GPIO_ACTIVE_LOW>; - label = "volume_up"; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - lcm0_iovcc: regulator-vio18-lcm0 { - compatible = "regulator-fixed"; - regulator-name = "vio18_lcm0"; - enable-active-high; - gpio = <&pio 47 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&dsi0_vreg_en_pins>; - vin-supply = <&mt6360_ldo2>; - }; - - lcm0_vddp: regulator-vsys-lcm0 { - compatible = "regulator-fixed"; - regulator-name = "vsys_lcm0"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&mt6360_ldo1>; - }; - - wifi_fixed_3v3: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "wifi_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 135 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&adsp { - memory-region = <&adsp_dma_mem>, <&adsp_mem>; - status = "okay"; -}; - -&afe { - memory-region = <&afe_dma_mem>; - status = "okay"; -}; - -&disp_pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&disp_pwm0_pins>; - status = "okay"; -}; - -&dither0_in { - remote-endpoint = <&gamma0_out>; -}; - -&dither0_out { - remote-endpoint = <&dsi0_in>; -}; - -&dmic_codec { - wakeup-delay-ms = <200>; -}; - -&dsi0 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - panel@0 { - compatible = "startek,kd070fhfid078", "himax,hx8279"; - reg = <0>; - backlight = <&backlight_lcm0>; - enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>; - iovcc-supply = <&lcm0_iovcc>; - vdd-supply = <&lcm0_vddp>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_default_pins>; - - port { - dsi_panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&dither0_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&dsi_panel_in>; - }; - }; - }; -}; - -ð { - phy-mode ="rgmii-rxid"; - phy-handle = <ð_phy0>; - snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; - snps,reset-delays-us = <0 10000 10000>; - mediatek,tx-delay-ps = <2030>; - mediatek,mac-wol; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <ð_default_pins>; - pinctrl-1 = <ð_sleep_pins>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - eth_phy0: ethernet-phy@1 { - compatible = "ethernet-phy-id001c.c916"; - reg = <0x1>; - }; - }; -}; - -&gamma0_out { - remote-endpoint = <&dither0_in>; -}; - -&gpu { - mali-supply = <&mt6315_7_vbuck1>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - - touchscreen@5d { - compatible = "goodix,gt9271"; - reg = <0x5d>; - interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; - irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; - AVDD28-supply = <&mt6360_ldo1>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pins>; - }; -}; - -&i2c2 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - status = "okay"; - - typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; - vcc-supply = <&mt6359_vibr_ldo_reg>; - mode-switch; - orientation-switch; - status = "okay"; - - port { - it5205_sbu_ep: endpoint { - remote-endpoint = <&mt6360_ssusb_sbu_ep>; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c6_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mt6360: pmic@34 { - compatible = "mediatek,mt6360"; - reg = <0x34>; - interrupt-parent = <&pio>; - interrupts = <128 IRQ_TYPE_EDGE_FALLING>; - interrupt-names = "IRQB"; - interrupt-controller; - #interrupt-cells = <1>; - pinctrl-0 = <&mt6360_pins>; - - charger { - compatible = "mediatek,mt6360-chg"; - richtek,vinovp-microvolt = <14500000>; - - otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-name = "usb-otg-vbus"; - regulator-min-microvolt = <4425000>; - regulator-max-microvolt = <5825000>; - }; - }; - - regulator { - compatible = "mediatek,mt6360-regulator"; - LDO_VIN3-supply = <&mt6360_buck2>; - - mt6360_buck1: buck1 { - regulator-name = "emi_vdd2"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1300000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP - MT6360_OPMODE_ULP>; - regulator-always-on; - }; - - mt6360_buck2: buck2 { - regulator-name = "emi_vddq"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1300000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP - MT6360_OPMODE_ULP>; - regulator-always-on; - }; - - mt6360_ldo1: ldo1 { - regulator-name = "tp1_p3v0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - regulator-always-on; - }; - - mt6360_ldo2: ldo2 { - regulator-name = "panel1_p1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - }; - - mt6360_ldo3: ldo3 { - regulator-name = "vmc_pmu"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - }; - - mt6360_ldo5: ldo5 { - regulator-name = "vmch_pmu"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - }; - - /* This is a measure point, which name is mt6360_ldo1 on schematic */ - mt6360_ldo6: ldo6 { - regulator-name = "mt6360_ldo1"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2100000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - }; - - mt6360_ldo7: ldo7 { - regulator-name = "emi_vmddr_en"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2100000>; - regulator-allowed-modes = <MT6360_OPMODE_NORMAL - MT6360_OPMODE_LP>; - regulator-always-on; - }; - }; - - tcpc { - compatible = "mediatek,mt6360-tcpc"; - interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "PD_IRQB"; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - op-sink-microwatt = <10000000>; - power-role = "dual"; - try-power-role = "sink"; - - source-pdos = <PDO_FIXED(5000, 1000, - PDO_FIXED_DUAL_ROLE | - PDO_FIXED_DATA_SWAP)>; - sink-pdos = <PDO_FIXED(5000, 2000, - PDO_FIXED_DUAL_ROLE | - PDO_FIXED_DATA_SWAP)>; - - pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>; - - altmodes { - displayport { - svid = /bits/ 16 <0xff01>; - vdo = <0x00001c46>; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - typec_con_hs: endpoint { - remote-endpoint = <&mtu3_hs0_role_sw>; - }; - }; - - port@1 { - reg = <1>; - typec_con_ss: endpoint { - remote-endpoint = <&mtu3_ss0_role_sw>; - }; - }; - - port@2 { - reg = <2>; - mt6360_ssusb_sbu_ep: endpoint { - remote-endpoint = <&it5205_sbu_ep>; - }; - }; - }; - }; - }; - }; -}; - -&mfg0 { - domain-supply = <&mt6315_7_vbuck1>; -}; - -&mfg1 { - domain-supply = <&mt6359_vsram_others_ldo_reg>; -}; - -&mipi_tx0 { - status = "okay"; -}; - -&mmc0 { - status = "okay"; - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_default_pins>; - pinctrl-1 = <&mmc0_uhs_pins>; - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-hw-reset; - no-sdio; - no-sd; - hs400-ds-delay = <0x14c11>; - vmmc-supply = <&mt6359_vemc_1_ldo_reg>; - vqmmc-supply = <&mt6359_vufs_ldo_reg>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc1_default_pins>; - pinctrl-1 = <&mmc1_uhs_pins>; - bus-width = <4>; - max-frequency = <200000000>; - cap-sd-highspeed; - sd-uhs-sdr50; - sd-uhs-sdr104; - no-mmc; - no-sdio; - vmmc-supply = <&mt6360_ldo5>; - vqmmc-supply = <&mt6360_ldo3>; - status = "okay"; - non-removable; -}; - -&mt6359_vaud18_ldo_reg { - regulator-always-on; -}; - -&mt6359_vbbck_ldo_reg { - regulator-always-on; -}; - -/* For USB Hub */ -&mt6359_vcamio_ldo_reg { - regulator-always-on; -}; - -&mt6359_vcn33_2_bt_ldo_reg { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -}; - -&mt6359_vcore_buck_reg { - regulator-always-on; -}; - -&mt6359_vgpu11_buck_reg { - regulator-always-on; -}; - -&mt6359_vpu_buck_reg { - regulator-always-on; -}; - -&mt6359_vrf12_ldo_reg { - regulator-always-on; -}; - -/* for GPU SRAM */ -&mt6359_vsram_others_ldo_reg { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; -}; - -&mt6359codec { - mediatek,mic-type-0 = <1>; /* ACC */ - mediatek,mic-type-1 = <3>; /* DCC */ - mediatek,mic-type-2 = <1>; /* ACC */ -}; - -&ovl0_in { - remote-endpoint = <&vdosys0_ep_main>; -}; - -&pcie0 { - pinctrl-names = "default", "idle"; - pinctrl-0 = <&pcie0_default_pins>; - pinctrl-1 = <&pcie0_idle_pins>; - status = "okay"; -}; - -&pcie1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_pins>; - status = "disabled"; -}; - -&pciephy { - status = "okay"; -}; - -&pio { - audio_default_pins: audio-default-pins { - pins-cmd-dat { - pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>, - <PINMUX_GPIO62__FUNC_DMIC1_DAT>, - <PINMUX_GPIO65__FUNC_PCM_DO>, - <PINMUX_GPIO66__FUNC_PCM_CLK>, - <PINMUX_GPIO67__FUNC_PCM_DI>, - <PINMUX_GPIO68__FUNC_PCM_SYNC>, - <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>, - <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>, - <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>, - <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>, - <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>, - <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>, - <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>; - }; - }; - - disp_pwm1_default_pins: disp-pwm1-default-pins { - pins1 { - pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>; - }; - }; - - edp_panel_12v_en_pins: edp-panel-12v-en-pins { - pins1 { - pinmux = <PINMUX_GPIO96__FUNC_GPIO96>; - output-high; - }; - }; - - edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { - pins1 { - pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; - output-high; - }; - }; - - eth_default_pins: eth-default-pins { - pins-cc { - pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, - <PINMUX_GPIO86__FUNC_GBE_RXC>, - <PINMUX_GPIO87__FUNC_GBE_RXDV>, - <PINMUX_GPIO88__FUNC_GBE_TXEN>; - drive-strength = <8>; - }; - - pins-mdio { - pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, - <PINMUX_GPIO90__FUNC_GBE_MDIO>; - input-enable; - }; - - pins-power { - pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, - <PINMUX_GPIO92__FUNC_GPIO92>; - output-high; - }; - - pins-rxd { - pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, - <PINMUX_GPIO82__FUNC_GBE_RXD2>, - <PINMUX_GPIO83__FUNC_GBE_RXD1>, - <PINMUX_GPIO84__FUNC_GBE_RXD0>; - }; - - pins-txd { - pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, - <PINMUX_GPIO78__FUNC_GBE_TXD2>, - <PINMUX_GPIO79__FUNC_GBE_TXD1>, - <PINMUX_GPIO80__FUNC_GBE_TXD0>; - drive-strength = <8>; - }; - }; - - eth_sleep_pins: eth-sleep-pins { - pins-cc { - pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, - <PINMUX_GPIO86__FUNC_GPIO86>, - <PINMUX_GPIO87__FUNC_GPIO87>, - <PINMUX_GPIO88__FUNC_GPIO88>; - }; - - pins-mdio { - pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, - <PINMUX_GPIO90__FUNC_GPIO90>; - input-disable; - bias-disable; - }; - - pins-rxd { - pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, - <PINMUX_GPIO82__FUNC_GPIO82>, - <PINMUX_GPIO83__FUNC_GPIO83>, - <PINMUX_GPIO84__FUNC_GPIO84>; - }; - - pins-txd { - pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, - <PINMUX_GPIO78__FUNC_GPIO78>, - <PINMUX_GPIO79__FUNC_GPIO79>, - <PINMUX_GPIO80__FUNC_GPIO80>; - }; - }; - - gpio_key_pins: gpio-keys-pins { - pins { - pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; - bias-pull-up; - input-enable; - }; - }; - - i2c0_pins: i2c0-pins { - pins { - pinmux = <PINMUX_GPIO8__FUNC_SDA0>, - <PINMUX_GPIO9__FUNC_SCL0>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; - drive-strength-microamp = <1000>; - }; - }; - - i2c1_pins: i2c1-pins { - pins { - pinmux = <PINMUX_GPIO10__FUNC_SDA1>, - <PINMUX_GPIO11__FUNC_SCL1>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; - drive-strength-microamp = <1000>; - }; - }; - - i2c2_pins: i2c2-pins { - pins { - pinmux = <PINMUX_GPIO12__FUNC_SDA2>, - <PINMUX_GPIO13__FUNC_SCL2>; - bias-pull-up = <MTK_PULL_SET_RSEL_111>; - drive-strength = <6>; - }; - }; - - i2c6_pins: i2c6-pins { - pins { - pinmux = <PINMUX_GPIO25__FUNC_SDA6>, - <PINMUX_GPIO26__FUNC_SCL6>; - bias-pull-up; - }; - }; - - mmc0_default_pins: mmc0-default-pins { - pins-clk { - pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <6>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-cmd-dat { - pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, - <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, - <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, - <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, - <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, - <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, - <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, - <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, - <PINMUX_GPIO121__FUNC_MSDC0_CMD>; - input-enable; - drive-strength = <6>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - - pins-rst { - pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <6>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - }; - - mmc0_uhs_pins: mmc0-uhs-pins { - pins-clk { - pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; - drive-strength = <8>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-cmd-dat { - pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, - <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, - <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, - <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, - <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, - <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, - <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, - <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, - <PINMUX_GPIO121__FUNC_MSDC0_CMD>; - input-enable; - drive-strength = <8>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - - pins-ds { - pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; - drive-strength = <8>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-rst { - pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; - drive-strength = <8>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - }; - - mmc1_default_pins: mmc1-default-pins { - pins-clk { - pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <8>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-cmd-dat { - pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, - <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, - <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, - <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, - <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; - input-enable; - drive-strength = <8>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - }; - - mmc1_uhs_pins: mmc1-uhs-pins { - pins-clk { - pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; - drive-strength = <8>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-cmd-dat { - pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, - <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, - <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, - <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, - <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; - input-enable; - drive-strength = <8>; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - }; - - mt6360_pins: mt6360-pins { - pins { - pinmux = <PINMUX_GPIO17__FUNC_GPIO17>, - <PINMUX_GPIO128__FUNC_GPIO128>; - input-enable; - bias-pull-up; - }; - }; - - dsi0_vreg_en_pins: dsi0-vreg-en-pins { - pins-pwr-en { - pinmux = <PINMUX_GPIO47__FUNC_GPIO47>; - output-low; - }; - }; - - panel_default_pins: panel-default-pins { - pins-rst { - pinmux = <PINMUX_GPIO108__FUNC_GPIO108>; - output-high; - }; - - pins-en { - pinmux = <PINMUX_GPIO48__FUNC_GPIO48>; - output-low; - }; - }; - - pcie0_default_pins: pcie0-default-pins { - pins { - pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, - <PINMUX_GPIO20__FUNC_PERSTN>, - <PINMUX_GPIO21__FUNC_CLKREQN>; - bias-pull-up; - }; - }; - - pcie0_idle_pins: pcie0-idle-pins { - pins { - pinmux = <PINMUX_GPIO20__FUNC_GPIO20>; - bias-disable; - output-low; - }; - }; - - pcie1_default_pins: pcie1-default-pins { - pins { - pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, - <PINMUX_GPIO23__FUNC_CLKREQN_1>, - <PINMUX_GPIO24__FUNC_WAKEN_1>; - bias-pull-up; - }; - }; - - disp_pwm0_pins: disp-pwm0-pins { - pins-disp-pwm { - pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>; - }; - }; - - spi1_pins: spi1-pins { - pins { - pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, - <PINMUX_GPIO137__FUNC_SPIM1_CLK>, - <PINMUX_GPIO138__FUNC_SPIM1_MO>, - <PINMUX_GPIO139__FUNC_SPIM1_MI>; - bias-disable; - }; - }; - - spi2_pins: spi-pins { - pins { - pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, - <PINMUX_GPIO141__FUNC_SPIM2_CLK>, - <PINMUX_GPIO142__FUNC_SPIM2_MO>, - <PINMUX_GPIO143__FUNC_SPIM2_MI>; - bias-disable; - }; - }; - - touch_pins: touch-pins { - pins-irq { - pinmux = <PINMUX_GPIO132__FUNC_GPIO132>; - input-enable; - bias-disable; - }; - - pins-reset { - pinmux = <PINMUX_GPIO133__FUNC_GPIO133>; - output-high; - }; - }; - - u3_p0_vbus: u3-p0-vbus-default-pins { - pins-vbus { - pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>; - input-enable; - }; - }; - - uart0_pins: uart0-pins { - pins { - pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, - <PINMUX_GPIO99__FUNC_URXD0>; - }; - }; - - uart1_pins: uart1-pins { - pins { - pinmux = <PINMUX_GPIO100__FUNC_URTS1>, - <PINMUX_GPIO101__FUNC_UCTS1>, - <PINMUX_GPIO102__FUNC_UTXD1>, - <PINMUX_GPIO103__FUNC_URXD1>; - }; - }; -}; - -&pmic { - interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; - - mt6359keys: keys { - compatible = "mediatek,mt6359-keys"; - mediatek,long-press-mode = <1>; - power-off-time-sec = <0>; - - power-key { - linux,keycodes = <KEY_POWER>; - wakeup-source; - }; - - home { - linux,keycodes = <KEY_HOME>; - }; - }; -}; - -&scp { - memory-region = <&scp_mem>; - firmware-name = "mediatek/mt8195/scp.img"; - status = "okay"; -}; - -&sound { - compatible = "mediatek,mt8195_mt6359"; - model = "mt8395-evk"; - pinctrl-names = "default"; - pinctrl-0 = <&audio_default_pins>; - audio-routing = - "Headphone", "Headphone L", - "Headphone", "Headphone R"; - mediatek,adsp = <&adsp>; - status = "okay"; - - headphone-dai-link { - link-name = "DL_SRC_BE"; - - codec { - sound-dai = <&pmic 0>; - }; - }; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - mediatek,pad-select = <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>; - - can0: can@0 { - compatible = "microchip,mcp2518fd"; - reg = <0>; - clocks = <&can_clk>; - spi-max-frequency = <20000000>; - interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; - xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; - }; -}; - -&spi2 { - pinctrl-0 = <&spi2_pins>; - pinctrl-names = "default"; - mediatek,pad-select = <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; -}; - -&spmi { - #address-cells = <2>; - #size-cells = <0>; - - mt6315_6: pmic@6 { - compatible = "mediatek,mt6315-regulator"; - reg = <0x6 SPMI_USID>; - - regulators { - mt6315_6_vbuck1: vbuck1 { - regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1193750>; - regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2>; - regulator-always-on; - }; - }; - }; - - mt6315_7: pmic@7 { - compatible = "mediatek,mt6315-regulator"; - reg = <0x7 SPMI_USID>; - - regulators { - mt6315_7_vbuck1: vbuck1 { - regulator-name = "Vgpu"; - regulator-min-microvolt = <546000>; - regulator-max-microvolt = <787000>; - regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2>; - }; - }; - }; -}; - -&u3phy0 { - status = "okay"; -}; - -&u3phy1 { - status = "okay"; - - u3port1: usb-phy@700 { - mediatek,force-mode; - }; -}; - -&u3phy2 { - status = "okay"; -}; - -&u3phy3 { - status = "okay"; -}; - -&uart0 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart1 { - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufsphy { - status = "disabled"; -}; - -&ssusb0 { - dr_mode = "otg"; - pinctrl-names = "default"; - pinctrl-0 = <&u3_p0_vbus>; - usb-role-switch; - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mtu3_hs0_role_sw: endpoint { - remote-endpoint = <&typec_con_hs>; - }; - }; - - port@1 { - reg = <1>; - mtu3_ss0_role_sw: endpoint { - remote-endpoint = <&typec_con_ss>; - }; - }; - }; -}; - -&ssusb2 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&ssusb3 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&vdosys0 { - port { - #address-cells = <1>; - #size-cells = <0>; - - vdosys0_ep_main: endpoint@0 { - reg = <0>; - remote-endpoint = <&ovl0_in>; - }; - }; -}; - -&xhci0 { - status = "okay"; -}; - -&xhci1 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&xhci2 { - status = "okay"; -}; - -&xhci3 { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi new file mode 100644 index 000000000000..2b7167804e71 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi @@ -0,0 +1,1230 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Ben Lok <ben.lok@mediatek.com> + * Macpaul Lin <macpaul.lin@mediatek.com> + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/usb/pd.h> + +/ { + aliases { + serial0 = &uart0; + ethernet0 = ð + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x2 0x00000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + vpu_mem: memory@53000000 { + compatible = "shared-dma-pool"; + reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_mem: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + + apu_mem: memory@62000000 { + compatible = "shared-dma-pool"; + reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ + }; + }; + + backlight_lcm0: backlight-lcm0 { + compatible = "pwm-backlight"; + brightness-levels = <0 1023>; + default-brightness-level = <576>; + num-interpolated-steps = <1023>; + pwms = <&disp_pwm0 0 500000>; + }; + + backlight_lcd1: backlight-lcd1 { + compatible = "pwm-backlight"; + pwms = <&disp_pwm1 0 500000>; + enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + status = "disabled"; + }; + + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can-clk"; + }; + + edp_panel_fixed_3v3: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "edp_panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_3v3_en_pins>; + }; + + edp_panel_fixed_12v: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "edp_backlight_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + gpio = <&pio 96 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_12v_en_pins>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + + button-volume-up { + wakeup-source; + debounce-interval = <100>; + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + lcm0_iovcc: regulator-vio18-lcm0 { + compatible = "regulator-fixed"; + regulator-name = "vio18_lcm0"; + enable-active-high; + gpio = <&pio 47 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dsi0_vreg_en_pins>; + vin-supply = <&mt6360_ldo2>; + }; + + lcm0_vddp: regulator-vsys-lcm0 { + compatible = "regulator-fixed"; + regulator-name = "vsys_lcm0"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&mt6360_ldo1>; + }; + + wifi_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "wifi_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&disp_pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; +}; + +&dither0_in { + remote-endpoint = <&gamma0_out>; +}; + +&dither0_out { + remote-endpoint = <&dsi0_in>; +}; + +&dmic_codec { + wakeup-delay-ms = <200>; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid078", "himax,hx8279"; + reg = <0>; + backlight = <&backlight_lcm0>; + enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&lcm0_iovcc>; + vdd-supply = <&lcm0_vddp>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_pins>; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dither0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; +}; + +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ð_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + mediatek,mac-wol; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + eth_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + +&gamma0_out { + remote-endpoint = <&dither0_in>; +}; + +&gpu { + mali-supply = <&mt6315_7_vbuck1>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&mt6360_ldo1>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + vcc-supply = <&mt6359_vibr_ldo_reg>; + mode-switch; + orientation-switch; + status = "okay"; + + port { + it5205_sbu_ep: endpoint { + remote-endpoint = <&mt6360_ssusb_sbu_ep>; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <128 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + pinctrl-0 = <&mt6360_pins>; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-name = "emi_vdd2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-name = "emi_vddq"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-name = "tp1_p3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + + mt6360_ldo2: ldo2 { + regulator-name = "panel1_p1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: ldo3 { + regulator-name = "vmc_pmu"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: ldo5 { + regulator-name = "vmch_pmu"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + /* This is a measure point, which name is mt6360_ldo1 on schematic */ + mt6360_ldo6: ldo6 { + regulator-name = "mt6360_ldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: ldo7 { + regulator-name = "emi_vmddr_en"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <10000000>; + power-role = "dual"; + try-power-role = "sink"; + + source-pdos = <PDO_FIXED(5000, 1000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP)>; + + pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec_con_hs: endpoint { + remote-endpoint = <&mtu3_hs0_role_sw>; + }; + }; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&mtu3_ss0_role_sw>; + }; + }; + + port@2 { + reg = <2>; + mt6360_ssusb_sbu_ep: endpoint { + remote-endpoint = <&it5205_sbu_ep>; + }; + }; + }; + }; + }; + }; +}; + +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + no-sdio; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; + non-removable; +}; + +&mt6359_vaud18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +/* For USB Hub */ +&mt6359_vcamio_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +/* for GPU SRAM */ +&mt6359_vsram_others_ldo_reg { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; +}; + +&mt6359codec { + mediatek,mic-type-0 = <1>; /* ACC */ + mediatek,mic-type-1 = <3>; /* DCC */ + mediatek,mic-type-2 = <1>; /* ACC */ +}; + +&ovl0_in { + remote-endpoint = <&vdosys0_ep_main>; +}; + +&pcie0 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pcie0_default_pins>; + pinctrl-1 = <&pcie0_idle_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_pins>; + status = "disabled"; +}; + +&pciephy { + status = "okay"; +}; + +&pio { + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>, + <PINMUX_GPIO62__FUNC_DMIC1_DAT>, + <PINMUX_GPIO65__FUNC_PCM_DO>, + <PINMUX_GPIO66__FUNC_PCM_CLK>, + <PINMUX_GPIO67__FUNC_PCM_DI>, + <PINMUX_GPIO68__FUNC_PCM_SYNC>, + <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>, + <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>, + <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>, + <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>, + <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>, + <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>, + <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>; + }; + }; + + disp_pwm1_default_pins: disp-pwm1-default-pins { + pins1 { + pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>; + }; + }; + + edp_panel_12v_en_pins: edp-panel-12v-en-pins { + pins1 { + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>; + output-high; + }; + }; + + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { + pins1 { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + output-high; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO86__FUNC_GBE_RXC>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO86__FUNC_GPIO86>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO88__FUNC_GPIO88>; + }; + + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + }; + + gpio_key_pins: gpio-keys-pins { + pins { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_111>; + drive-strength = <6>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mt6360_pins: mt6360-pins { + pins { + pinmux = <PINMUX_GPIO17__FUNC_GPIO17>, + <PINMUX_GPIO128__FUNC_GPIO128>; + input-enable; + bias-pull-up; + }; + }; + + dsi0_vreg_en_pins: dsi0-vreg-en-pins { + pins-pwr-en { + pinmux = <PINMUX_GPIO47__FUNC_GPIO47>; + output-low; + }; + }; + + panel_default_pins: panel-default-pins { + pins-rst { + pinmux = <PINMUX_GPIO108__FUNC_GPIO108>; + output-high; + }; + + pins-en { + pinmux = <PINMUX_GPIO48__FUNC_GPIO48>; + output-low; + }; + }; + + pcie0_default_pins: pcie0-default-pins { + pins { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie0_idle_pins: pcie0-idle-pins { + pins { + pinmux = <PINMUX_GPIO20__FUNC_GPIO20>; + bias-disable; + output-low; + }; + }; + + pcie1_default_pins: pcie1-default-pins { + pins { + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, + <PINMUX_GPIO23__FUNC_CLKREQN_1>, + <PINMUX_GPIO24__FUNC_WAKEN_1>; + bias-pull-up; + }; + }; + + disp_pwm0_pins: disp-pwm0-pins { + pins-disp-pwm { + pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>; + }; + }; + + spi1_pins: spi1-pins { + pins { + pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>, + <PINMUX_GPIO137__FUNC_SPIM1_CLK>, + <PINMUX_GPIO138__FUNC_SPIM1_MO>, + <PINMUX_GPIO139__FUNC_SPIM1_MI>; + bias-disable; + }; + }; + + spi2_pins: spi-pins { + pins { + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, + <PINMUX_GPIO142__FUNC_SPIM2_MO>, + <PINMUX_GPIO143__FUNC_SPIM2_MI>; + bias-disable; + }; + }; + + touch_pins: touch-pins { + pins-irq { + pinmux = <PINMUX_GPIO132__FUNC_GPIO132>; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = <PINMUX_GPIO133__FUNC_GPIO133>; + output-high; + }; + }; + + u3_p0_vbus: u3-p0-vbus-default-pins { + pins-vbus { + pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>; + input-enable; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO100__FUNC_URTS1>, + <PINMUX_GPIO101__FUNC_UCTS1>, + <PINMUX_GPIO102__FUNC_UTXD1>, + <PINMUX_GPIO103__FUNC_URXD1>; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + mt6359keys: keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + + home { + linux,keycodes = <KEY_HOME>; + }; + }; +}; + +&scp { + memory-region = <&scp_mem>; + firmware-name = "mediatek/mt8195/scp.img"; + status = "okay"; +}; + +&sound { + compatible = "mediatek,mt8195_mt6359"; + model = "mt8395-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R"; + mediatek,adsp = <&adsp>; + status = "okay"; + + headphone-dai-link { + link-name = "DL_SRC_BE"; + + codec { + sound-dai = <&pmic 0>; + }; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>; + + can0: can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&can_clk>; + spi-max-frequency = <20000000>; + interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + }; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-name = "Vgpu"; + regulator-min-microvolt = <546000>; + regulator-max-microvolt = <787000>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; + + u3port1: usb-phy@700 { + mediatek,force-mode; + }; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufsphy { + status = "disabled"; +}; + +&ssusb0 { + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&u3_p0_vbus>; + usb-role-switch; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mtu3_hs0_role_sw: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; + + port@1 { + reg = <1>; + mtu3_ss0_role_sw: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; +}; + +&ssusb2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&vdosys0 { + port { + #address-cells = <1>; + #size-cells = <0>; + + vdosys0_ep_main: endpoint@0 { + reg = <0>; + remote-endpoint = <&ovl0_in>; + }; + }; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 171e08c94d5a..b139cbd14442 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -3,6 +3,7 @@ # Enables support for device-tree overlays DTC_FLAGS_tegra210-p2371-2180 := -@ DTC_FLAGS_tegra210-p3450-0000 := -@ +DTC_FLAGS_tegra210-p3541-0000 := -@ DTC_FLAGS_tegra186-p2771-0000 := -@ DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@ DTC_FLAGS_tegra194-p2972-0000 := -@ @@ -19,6 +20,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3541-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 5bcccfef3f7f..26cd11a8a4a1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -175,6 +175,7 @@ gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x50041000 0x0 0x1000>, @@ -271,7 +272,7 @@ interrupt-controller; }; - apbdma: dma@60020000 { + apbdma: dma-controller@60020000 { compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 5f3f572ecea9..d9aafe053112 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -671,7 +671,6 @@ vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_LOW>; - id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 5778c93af3e6..b00630451909 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -36,6 +36,12 @@ interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux 0 0 140>; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra186-pinmux"; + reg = <0x0 0x2430000 0x0 0x15000>; }; ethernet@2490000 { @@ -1173,6 +1179,7 @@ gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x03881000 0x0 0x1000>, @@ -1274,10 +1281,16 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinmux_aon 0 0 47>; interrupt-controller; #interrupt-cells = <2>; }; + pinmux_aon: pinmux@c300000 { + compatible = "nvidia,tegra186-pinmux-aon"; + reg = <0x0 0xc300000 0x0 0x4000>; + }; + pwm4: pwm@c340000 { compatible = "nvidia,tegra186-pwm"; reg = <0x0 0xc340000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi index a410fc335fa3..c0f17f8189fa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi @@ -42,6 +42,7 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; #phy-cells = <0>; + wakeup-source; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 1399342f23e1..b782f8db1288 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1331,6 +1331,7 @@ gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x03881000 0x0 0x1000>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index e07aeeee3586..9ee7952af799 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -18,6 +18,12 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 584461f3a619..4a64fe510f03 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -20,10 +20,10 @@ vi@54080000 { status = "okay"; - avdd-dsi-csi-supply = <&vdd_dsi_csi>; - csi@838 { status = "okay"; + + avdd-dsi-csi-supply = <&vdd_dsi_csi>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index ec0e84cb83ef..d78b9bd45df6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -22,6 +22,12 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; @@ -64,10 +70,10 @@ vi@54080000 { status = "okay"; - avdd-dsi-csi-supply = <&vdd_sys_1v2>; - csi@838 { status = "okay"; + + avdd-dsi-csi-supply = <&vdd_sys_1v2>; }; }; @@ -520,7 +526,7 @@ ports { usb2-0 { status = "okay"; - mode = "peripheral"; + mode = "otg"; usb-role-switch; vbus-supply = <&vdd_5v0_usb>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts new file mode 100644 index 000000000000..b86e271dde0b --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra210-p3450-0000.dts" + +/ { + model = "NVIDIA Jetson Nano 2GB Developer Kit"; + compatible = "nvidia,p3541-0000", "nvidia,p3450-0000", "nvidia,tegra210"; + + memory@80000000 { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@50000000 { + sor@54540000 { + status = "disabled"; + }; + + dpaux@545c0000 { + status = "disabled"; + }; + }; + + padctl@7009f000 { + ports { + usb2-1 { + vbus-supply = <&vdd_hub_5v0>; + }; + + usb2-2 { + vbus-supply = <&vdd_hub_5v0>; + }; + + usb3-0 { + /delete-property/ vbus-supply; + }; + }; + }; + + regulator-vdd-hdmi-5v0 { + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ regulator-vdd-hub-3v3; + + vdd_hub_5v0: regulator-vdd-hub-5v0 { + compatible = "regulator-fixed"; + + regulator-name = "VDD_HUB_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi new file mode 100644 index 000000000000..bf2527d73793 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + /* EMC DVFS OPP table */ + emc_icc_dvfs_opp_table: opp-table-dvfs0 { + compatible = "operating-points-v2"; + + opp-40800000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + }; + + opp-68000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + }; + + opp-102000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + }; + + opp-204000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + opp-suspend; + }; + + opp-408000000-812 { + opp-microvolt = <812000 812000 1150000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0003>; + }; + + opp-665600000-825 { + opp-microvolt = <825000 825000 1150000>; + opp-hz = /bits/ 64 <665600000>; + opp-supported-hw = <0x0003>; + }; + + opp-800000000-825 { + opp-microvolt = <825000 825000 1150000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0003>; + }; + + opp-1065600000-837 { + opp-microvolt = <837000 837000 1150000>; + opp-hz = /bits/ 64 <1065600000>; + opp-supported-hw = <0x0003>; + }; + + opp-1331200000-850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <1331200000>; + opp-supported-hw = <0x0003>; + }; + + opp-1600000000-887 { + opp-microvolt = <887000 887000 1150000>; + opp-hz = /bits/ 64 <1600000000>; + opp-supported-hw = <0x0007>; + }; + }; + + /* EMC bandwidth OPP table */ + emc_bw_dfs_opp_table: opp-table-dvfs1 { + compatible = "operating-points-v2"; + + opp-40800000 { + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <652800>; + }; + + opp-68000000 { + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <1088000>; + }; + + opp-102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <1632000>; + }; + + opp-204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + opp-peak-kBps = <3264000>; + opp-suspend; + }; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <6528000>; + }; + + opp-665600000 { + opp-hz = /bits/ 64 <665600000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <10649600>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <12800000>; + }; + + opp-1065600000 { + opp-hz = /bits/ 64 <1065600000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <17049600>; + }; + + opp-1331200000 { + opp-hz = /bits/ 64 <1331200000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <21299200>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-supported-hw = <0x0007>; + opp-peak-kBps = <25600000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 402b0ede1472..709da31d5785 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -9,6 +9,8 @@ #include <dt-bindings/thermal/tegra124-soctherm.h> #include <dt-bindings/soc/tegra-pmc.h> +#include "tegra210-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra210"; interrupt-parent = <&lic>; @@ -183,9 +185,7 @@ reg = <0x0 0x54100000 0x0 0x00040000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_TSEC>; - clock-names = "tsec"; resets = <&tegra_car 83>; - reset-names = "tsec"; status = "disabled"; }; @@ -202,6 +202,19 @@ nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <0>; + + interconnects = <&mc TEGRA210_MC_DISPLAY0A &emc>, + <&mc TEGRA210_MC_DISPLAY0B &emc>, + <&mc TEGRA210_MC_DISPLAY0C &emc>, + <&mc TEGRA210_MC_DISPLAYHC &emc>, + <&mc TEGRA210_MC_DISPLAYD &emc>, + <&mc TEGRA210_MC_DISPLAYT &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor", + "wind", + "wint"; }; dc@54240000 { @@ -217,6 +230,15 @@ nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <1>; + + interconnects = <&mc TEGRA210_MC_DISPLAY0AB &emc>, + <&mc TEGRA210_MC_DISPLAY0BB &emc>, + <&mc TEGRA210_MC_DISPLAY0CB &emc>, + <&mc TEGRA210_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; }; dsia: dsi@54300000 { @@ -253,7 +275,13 @@ nvjpg@54380000 { compatible = "nvidia,tegra210-nvjpg"; reg = <0x0 0x54380000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVJPG>; + clock-names = "nvjpg"; + resets = <&tegra_car 195>; + reset-names = "nvjpg"; + + iommus = <&mc TEGRA_SWGROUP_NVJPG>; + power-domains = <&pd_nvjpg>; }; dsib: dsi@54400000 { @@ -277,13 +305,25 @@ nvdec@54480000 { compatible = "nvidia,tegra210-nvdec"; reg = <0x0 0x54480000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&tegra_car 194>; + reset-names = "nvdec"; + + iommus = <&mc TEGRA_SWGROUP_NVDEC>; + power-domains = <&pd_nvdec>; }; nvenc@544c0000 { compatible = "nvidia,tegra210-nvenc"; reg = <0x0 0x544c0000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVENC>; + clock-names = "nvenc"; + resets = <&tegra_car 219>; + reset-names = "nvenc"; + + iommus = <&mc TEGRA_SWGROUP_NVENC>; + power-domains = <&pd_nvenc>; }; tsec@54500000 { @@ -409,6 +449,7 @@ gic: interrupt-controller@50041000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x50041000 0x0 0x1000>, @@ -485,6 +526,21 @@ reg = <0x0 0x60007000 0x0 0x1000>; }; + actmon@6000c800 { + compatible = "nvidia,tegra210-actmon", "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_ACTMON>, + <&tegra_car TEGRA210_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA210_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; + gpio: gpio@6000d000 { compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -502,7 +558,7 @@ interrupt-controller; }; - apbdma: dma@60020000 { + apbdma: dma-controller@60020000 { compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -894,6 +950,18 @@ #power-domain-cells = <0>; }; + pd_nvenc: mpe { + clocks = <&tegra_car TEGRA210_CLK_NVENC>; + resets = <&tegra_car 219>; + #power-domain-cells = <0>; + }; + + pd_nvdec: nvdec { + clocks = <&tegra_car TEGRA210_CLK_NVDEC>; + resets = <&tegra_car 194>; + #power-domain-cells = <0>; + }; + pd_sor: sor { clocks = <&tegra_car TEGRA210_CLK_SOR0>, <&tegra_car TEGRA210_CLK_SOR1>, @@ -947,6 +1015,12 @@ resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; #power-domain-cells = <0>; }; + + pd_nvjpg: nvjpg { + clocks = <&tegra_car TEGRA210_CLK_NVJPG>; + resets = <&tegra_car 195>; + #power-domain-cells = <0>; + }; }; }; @@ -978,6 +1052,7 @@ #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; emc: external-memory-controller@7001b000 { @@ -989,6 +1064,9 @@ clock-names = "emc"; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi index 9086a0d010e5..58bf55c0e414 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi @@ -8,6 +8,7 @@ aliases { mmc0 = "/bus@0/mmc@3460000"; mmc1 = "/bus@0/mmc@3400000"; + rtc0 = "/bpmp/i2c/pmic@3c"; }; bus@0 { @@ -170,6 +171,16 @@ i2c { status = "okay"; + pmic@3c { + compatible = "nvidia,vrs-10"; + reg = <0x3c>; + interrupt-parent = <&pmc>; + /* VRS Wake ID is 24 */ + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + thermal-sensor@4c { compatible = "ti,tmp451"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi index 84db7132e8fc..ab391a71c3d3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -7,6 +7,7 @@ aliases { mmc0 = "/bus@0/mmc@3400000"; + rtc0 = "/bpmp/i2c/pmic@3c"; }; bus@0 { @@ -121,6 +122,20 @@ }; }; + bpmp { + i2c { + pmic@3c { + compatible = "nvidia,vrs-10"; + reg = <0x3c>; + interrupt-parent = <&pmc>; + /* VRS Wake ID is 24 */ + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + vdd_5v0_sys: regulator-vdd-5v0-sys { compatible = "regulator-fixed"; regulator-name = "VDD_5V0_SYS"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index df034dbb8285..827dbb420826 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/power/tegra234-powergate.h> #include <dt-bindings/reset/tegra234-reset.h> #include <dt-bindings/thermal/tegra234-bpmp-thermal.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> / { compatible = "nvidia,tegra234"; @@ -127,6 +128,56 @@ pinmux: pinmux@2430000 { compatible = "nvidia,tegra234-pinmux"; reg = <0x0 0x2430000 0x0 0x19100>; + + pex_rst_c4_in_state: pinmux-pex-rst-c4-in { + pex_rst { + nvidia,pins = "pex_l4_rst_n_pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + + pex_rst_c5_in_state: pinmux-pex-rst-c5-in { + pex_rst { + nvidia,pins = "pex_l5_rst_n_paf1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + + pex_rst_c6_in_state: pinmux-pex-rst-c6-in { + pex_rst { + nvidia,pins = "pex_l6_rst_n_paf3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + + pex_rst_c7_in_state: pinmux-pex-rst-c7-in { + pex_rst { + nvidia,pins = "pex_l7_rst_n_pag1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + + pex_rst_c10_in_state: pinmux-pex-rst-c10-in { + pex_rst { + nvidia,pins = "pex_l10_rst_n_pag7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; }; gpcdma: dma-controller@2600000 { @@ -3276,8 +3327,15 @@ <0x0 0x03650000 0x0 0x10000>; reg-names = "hcd", "fpci", "bar2"; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 77 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 78 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 79 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 80 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 81 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, <&bpmp TEGRA234_CLK_XUSB_FALCON>, @@ -4630,6 +4688,8 @@ <&bpmp TEGRA234_RESET_PEX2_CORE_10>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c10_in_state>; interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ interrupt-names = "intr"; @@ -4881,6 +4941,8 @@ <&bpmp TEGRA234_RESET_PEX0_CORE_4>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c4_in_state>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ interrupt-names = "intr"; nvidia,bpmp = <&bpmp 4>; @@ -5023,6 +5085,8 @@ <&bpmp TEGRA234_RESET_PEX1_CORE_5>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_in_state>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ interrupt-names = "intr"; @@ -5115,6 +5179,8 @@ <&bpmp TEGRA234_RESET_PEX1_CORE_6>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c6_in_state>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ interrupt-names = "intr"; @@ -5207,6 +5273,8 @@ <&bpmp TEGRA234_RESET_PEX2_CORE_7>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c7_in_state>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ interrupt-names = "intr"; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi index 6b6259b7310f..b1bd4ee7aee3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi @@ -1,4 +1,112 @@ // SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause / { + bus@0 { + aconnect@9000000 { + status = "okay"; + + dma-controller@9440000 { + status = "okay"; + }; + + ahub@9630000 { + status = "okay"; + + i2s@9280000 { + status = "okay"; + }; + + i2s@9290000 { + status = "okay"; + }; + + i2s@92b0000 { + status = "okay"; + }; + }; + + interrupt-controller@9960000 { + status = "okay"; + }; + }; + }; + + bus@8800000000 { + hda@90b0000 { + nvidia,model = "NVIDIA Jetson Thor AGX HDA"; + status = "okay"; + }; + }; + + sound { + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + <&admaif20_port>, <&admaif21_port>, <&admaif22_port>, <&admaif23_port>, + <&admaif24_port>, <&admaif25_port>, <&admaif26_port>, <&admaif27_port>, + <&admaif28_port>, <&admaif29_port>, <&admaif30_port>, <&admaif31_port>, + /* XBAR Ports */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_amx5_in1_port>, <&xbar_amx5_in2_port>, + <&xbar_amx5_in3_port>, <&xbar_amx5_in4_port>, + <&xbar_amx6_in1_port>, <&xbar_amx6_in2_port>, + <&xbar_amx6_in3_port>, <&xbar_amx6_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_adx5_in_port>, <&xbar_adx6_in_port>, + <&xbar_mix_in1_port>, <&xbar_mix_in2_port>, + <&xbar_mix_in3_port>, <&xbar_mix_in4_port>, + <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, + <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, + <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&amx5_out_port>, <&amx6_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&adx5_out1_port>, <&adx5_out2_port>, + <&adx5_out3_port>, <&adx5_out4_port>, + <&adx6_out1_port>, <&adx6_out2_port>, + <&adx6_out3_port>, <&adx6_out4_port>, + <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, + <&mix_out4_port>, <&mix_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, + /* BE I/O Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s4_port>; + + label = "NVIDIA Jetson Thor AGX APE"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi index 872a69553e3c..f137565da804 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> #include <dt-bindings/memory/nvidia,tegra264.h> +#include <dt-bindings/power/nvidia,tegra264-bpmp.h> #include <dt-bindings/reset/nvidia,tegra264.h> / { @@ -49,6 +50,3163 @@ status = "disabled"; }; + aconnect@9000000 { + compatible = "nvidia,tegra264-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA264_CLK_APE>, + <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA264_POWER_DOMAIN_AUD>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x9000000 0x0 0x9000000 0x0 0x2000000>; + + adma: dma-controller@9440000 { + compatible = "nvidia,tegra264-adma"; + reg = <0x0 0x9440000 0x0 0xb0000>; + interrupt-parent = <&agic_page0>; + interrupts = <GIC_SPI 0x90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9a IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9b IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9c IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9d IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9e IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0x9f IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xa9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xaa IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xab IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xac IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xad IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xae IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xaf IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xb9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xba IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xbb IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xbc IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xbd IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xbe IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xbf IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xc9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xca IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xcb IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xcc IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xcd IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xce IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 0xcf IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA264_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + tegra_ahub: ahub@9630000 { + compatible = "nvidia,tegra264-ahub"; + reg = <0x0 0x9630000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_AHUB>; + clock-names = "ahub"; + assigned-clocks = <&bpmp TEGRA264_CLK_AHUB>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON_APE>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + /* ADMA is under AHUB range, its excluded in the defined range */ + ranges = <0x0 0x9280000 0x0 0x9280000 0x0 0x1c0000>, + <0x0 0x9510000 0x0 0x9510000 0x0 0x370000>; + + tegra_i2s1: i2s@9280000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x9280000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S1>, + <&bpmp TEGRA264_CLK_I2S1_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif: endpoint { + remote-endpoint = <&xbar_i2s1>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s2: i2s@9290000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x9290000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S2>, + <&bpmp TEGRA264_CLK_I2S2_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S2>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif: endpoint { + remote-endpoint = <&xbar_i2s2>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s3: i2s@92a0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92a0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S3>, + <&bpmp TEGRA264_CLK_I2S3_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S3>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif: endpoint { + remote-endpoint = <&xbar_i2s3>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s4: i2s@92b0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92b0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S4>, + <&bpmp TEGRA264_CLK_I2S4_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S4>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif: endpoint { + remote-endpoint = <&xbar_i2s4>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s5: i2s@92c0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92c0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S5>, + <&bpmp TEGRA264_CLK_I2S5_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S5>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif: endpoint { + remote-endpoint = <&xbar_i2s5>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s6: i2s@92d0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92d0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S6>, + <&bpmp TEGRA264_CLK_I2S6_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S6>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S6"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif: endpoint { + remote-endpoint = <&xbar_i2s6>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s7: i2s@92e0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92e0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S7>, + <&bpmp TEGRA264_CLK_I2S7_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S7>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S7"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s7_cif: endpoint { + remote-endpoint = <&xbar_i2s7>; + }; + }; + + i2s7_port: port@1 { + reg = <1>; + + i2s7_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s8: i2s@92f0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92f0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S8>, + <&bpmp TEGRA264_CLK_I2S8_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S8>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S8"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s8_cif: endpoint { + remote-endpoint = <&xbar_i2s8>; + }; + }; + + i2s8_port: port@1 { + reg = <1>; + + i2s8_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dmic1: dmic@9300000 { + compatible = "nvidia,tegra264-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x9300000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif: endpoint { + remote-endpoint = <&xbar_dmic1>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dmic2: dmic@9310000 { + compatible = "nvidia,tegra264-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x9310000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif: endpoint { + remote-endpoint = <&xbar_dmic2>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dspk1: dspk@9380000 { + compatible = "nvidia,tegra264-dspk", + "nvidia,tegra186-dspk"; + reg = <0x0 0x9380000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA264_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif: endpoint { + remote-endpoint = <&xbar_dspk1>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_amx1: amx@9510000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9510000 0x0 0x10000>; + sound-name-prefix = "AMX1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1: endpoint { + remote-endpoint = <&xbar_amx1_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2: endpoint { + remote-endpoint = <&xbar_amx1_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3: endpoint { + remote-endpoint = <&xbar_amx1_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4: endpoint { + remote-endpoint = <&xbar_amx1_in4>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out: endpoint { + remote-endpoint = <&xbar_amx1_out>; + }; + }; + }; + }; + + tegra_amx2: amx@9520000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9520000 0x0 0x10000>; + sound-name-prefix = "AMX2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1: endpoint { + remote-endpoint = <&xbar_amx2_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2: endpoint { + remote-endpoint = <&xbar_amx2_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx2_in3: endpoint { + remote-endpoint = <&xbar_amx2_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx2_in4: endpoint { + remote-endpoint = <&xbar_amx2_in4>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out: endpoint { + remote-endpoint = <&xbar_amx2_out>; + }; + }; + }; + }; + + tegra_amx3: amx@9530000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9530000 0x0 0x10000>; + sound-name-prefix = "AMX3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1: endpoint { + remote-endpoint = <&xbar_amx3_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2: endpoint { + remote-endpoint = <&xbar_amx3_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3: endpoint { + remote-endpoint = <&xbar_amx3_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4: endpoint { + remote-endpoint = <&xbar_amx3_in4>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out: endpoint { + remote-endpoint = <&xbar_amx3_out>; + }; + }; + }; + }; + + tegra_amx4: amx@9540000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9540000 0x0 0x10000>; + sound-name-prefix = "AMX4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1: endpoint { + remote-endpoint = <&xbar_amx4_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2: endpoint { + remote-endpoint = <&xbar_amx4_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3: endpoint { + remote-endpoint = <&xbar_amx4_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4: endpoint { + remote-endpoint = <&xbar_amx4_in4>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out: endpoint { + remote-endpoint = <&xbar_amx4_out>; + }; + }; + }; + }; + + tegra_amx5: amx@9550000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9550000 0x0 0x10000>; + sound-name-prefix = "AMX5"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx5_in1: endpoint { + remote-endpoint = <&xbar_amx5_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx5_in2: endpoint { + remote-endpoint = <&xbar_amx5_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx5_in3: endpoint { + remote-endpoint = <&xbar_amx5_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx5_in4: endpoint { + remote-endpoint = <&xbar_amx5_in4>; + }; + }; + + amx5_out_port: port@4 { + reg = <4>; + + amx5_out: endpoint { + remote-endpoint = <&xbar_amx5_out>; + }; + }; + }; + }; + + tegra_amx6: amx@9560000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9560000 0x0 0x10000>; + sound-name-prefix = "AMX6"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx6_in1: endpoint { + remote-endpoint = <&xbar_amx6_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx6_in2: endpoint { + remote-endpoint = <&xbar_amx6_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx6_in3: endpoint { + remote-endpoint = <&xbar_amx6_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx6_in4: endpoint { + remote-endpoint = <&xbar_amx6_in4>; + }; + }; + + amx6_out_port: port@4 { + reg = <4>; + + amx6_out: endpoint { + remote-endpoint = <&xbar_amx6_out>; + }; + }; + }; + }; + + tegra_adx1: adx@9590000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x9590000 0x0 0x10000>; + sound-name-prefix = "ADX1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in: endpoint { + remote-endpoint = <&xbar_adx1_in>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1: endpoint { + remote-endpoint = <&xbar_adx1_out1>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2: endpoint { + remote-endpoint = <&xbar_adx1_out2>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3: endpoint { + remote-endpoint = <&xbar_adx1_out3>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4: endpoint { + remote-endpoint = <&xbar_adx1_out4>; + }; + }; + }; + }; + + tegra_adx2: adx@95a0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95a0000 0x0 0x10000>; + sound-name-prefix = "ADX2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in: endpoint { + remote-endpoint = <&xbar_adx2_in>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1: endpoint { + remote-endpoint = <&xbar_adx2_out1>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2: endpoint { + remote-endpoint = <&xbar_adx2_out2>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3: endpoint { + remote-endpoint = <&xbar_adx2_out3>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4: endpoint { + remote-endpoint = <&xbar_adx2_out4>; + }; + }; + }; + }; + + tegra_adx3: adx@95b0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95b0000 0x0 0x10000>; + sound-name-prefix = "ADX3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in: endpoint { + remote-endpoint = <&xbar_adx3_in>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1: endpoint { + remote-endpoint = <&xbar_adx3_out1>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2: endpoint { + remote-endpoint = <&xbar_adx3_out2>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3: endpoint { + remote-endpoint = <&xbar_adx3_out3>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4: endpoint { + remote-endpoint = <&xbar_adx3_out4>; + }; + }; + }; + }; + + tegra_adx4: adx@95c0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95c0000 0x0 0x10000>; + sound-name-prefix = "ADX4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in: endpoint { + remote-endpoint = <&xbar_adx4_in>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1: endpoint { + remote-endpoint = <&xbar_adx4_out1>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2: endpoint { + remote-endpoint = <&xbar_adx4_out2>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3: endpoint { + remote-endpoint = <&xbar_adx4_out3>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4: endpoint { + remote-endpoint = <&xbar_adx4_out4>; + }; + }; + }; + }; + + tegra_adx5: adx@95d0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95d0000 0x0 0x10000>; + sound-name-prefix = "ADX5"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx5_in: endpoint { + remote-endpoint = <&xbar_adx5_in>; + }; + }; + + adx5_out1_port: port@1 { + reg = <1>; + + adx5_out1: endpoint { + remote-endpoint = <&xbar_adx5_out1>; + }; + }; + + adx5_out2_port: port@2 { + reg = <2>; + + adx5_out2: endpoint { + remote-endpoint = <&xbar_adx5_out2>; + }; + }; + + adx5_out3_port: port@3 { + reg = <3>; + + adx5_out3: endpoint { + remote-endpoint = <&xbar_adx5_out3>; + }; + }; + + adx5_out4_port: port@4 { + reg = <4>; + + adx5_out4: endpoint { + remote-endpoint = <&xbar_adx5_out4>; + }; + }; + }; + }; + + tegra_adx6: adx@95e0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95e0000 0x0 0x10000>; + sound-name-prefix = "ADX6"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx6_in: endpoint { + remote-endpoint = <&xbar_adx6_in>; + }; + }; + + adx6_out1_port: port@1 { + reg = <1>; + + adx6_out1: endpoint { + remote-endpoint = <&xbar_adx6_out1>; + }; + }; + + adx6_out2_port: port@2 { + reg = <2>; + + adx6_out2: endpoint { + remote-endpoint = <&xbar_adx6_out2>; + }; + }; + + adx6_out3_port: port@3 { + reg = <3>; + + adx6_out3: endpoint { + remote-endpoint = <&xbar_adx6_out3>; + }; + }; + + adx6_out4_port: port@4 { + reg = <4>; + + adx6_out4: endpoint { + remote-endpoint = <&xbar_adx6_out4>; + }; + }; + }; + }; + + tegra_admaif: admaif@9610000 { + compatible = "nvidia,tegra264-admaif"; + reg = <0x0 0x9610000 0x0 0x10000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>, + <&adma 21>, <&adma 21>, + <&adma 22>, <&adma 22>, + <&adma 23>, <&adma 23>, + <&adma 24>, <&adma 24>, + <&adma 25>, <&adma 25>, + <&adma 26>, <&adma 26>, + <&adma 27>, <&adma 27>, + <&adma 28>, <&adma 28>, + <&adma 29>, <&adma 29>, + <&adma 30>, <&adma 30>, + <&adma 31>, <&adma 31>, + <&adma 32>, <&adma 32>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20", + "rx21", "tx21", + "rx22", "tx22", + "rx23", "tx23", + "rx24", "tx24", + "rx25", "tx25", + "rx26", "tx26", + "rx27", "tx27", + "rx28", "tx28", + "rx29", "tx29", + "rx30", "tx30", + "rx31", "tx31", + "rx32", "tx32"; + + interconnects = + <&mc TEGRA264_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA264_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + + iommus = <&smmu1 TEGRA264_SID_APE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0: endpoint { + remote-endpoint = <&xbar_admaif0>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1: endpoint { + remote-endpoint = <&xbar_admaif1>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2: endpoint { + remote-endpoint = <&xbar_admaif2>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3: endpoint { + remote-endpoint = <&xbar_admaif3>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4: endpoint { + remote-endpoint = <&xbar_admaif4>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5: endpoint { + remote-endpoint = <&xbar_admaif5>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6: endpoint { + remote-endpoint = <&xbar_admaif6>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7: endpoint { + remote-endpoint = <&xbar_admaif7>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8: endpoint { + remote-endpoint = <&xbar_admaif8>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9: endpoint { + remote-endpoint = <&xbar_admaif9>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10: endpoint { + remote-endpoint = <&xbar_admaif10>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11: endpoint { + remote-endpoint = <&xbar_admaif11>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12: endpoint { + remote-endpoint = <&xbar_admaif12>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13: endpoint { + remote-endpoint = <&xbar_admaif13>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14: endpoint { + remote-endpoint = <&xbar_admaif14>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15: endpoint { + remote-endpoint = <&xbar_admaif15>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16: endpoint { + remote-endpoint = <&xbar_admaif16>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17: endpoint { + remote-endpoint = <&xbar_admaif17>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18: endpoint { + remote-endpoint = <&xbar_admaif18>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19: endpoint { + remote-endpoint = <&xbar_admaif19>; + }; + }; + + admaif20_port: port@14 { + reg = <0x14>; + + admaif20: endpoint { + remote-endpoint = <&xbar_admaif20>; + }; + }; + + admaif21_port: port@15 { + reg = <0x15>; + + admaif21: endpoint { + remote-endpoint = <&xbar_admaif21>; + }; + }; + + admaif22_port: port@16 { + reg = <0x16>; + + admaif22: endpoint { + remote-endpoint = <&xbar_admaif22>; + }; + }; + + admaif23_port: port@17 { + reg = <0x17>; + + admaif23: endpoint { + remote-endpoint = <&xbar_admaif23>; + }; + }; + + admaif24_port: port@18 { + reg = <0x18>; + + admaif24: endpoint { + remote-endpoint = <&xbar_admaif24>; + }; + }; + + admaif25_port: port@19 { + reg = <0x19>; + + admaif25: endpoint { + remote-endpoint = <&xbar_admaif25>; + }; + }; + + admaif26_port: port@1a { + reg = <0x1a>; + + admaif26: endpoint { + remote-endpoint = <&xbar_admaif26>; + }; + }; + + admaif27_port: port@1b { + reg = <0x1b>; + + admaif27: endpoint { + remote-endpoint = <&xbar_admaif27>; + }; + }; + + admaif28_port: port@1c { + reg = <0x1c>; + + admaif28: endpoint { + remote-endpoint = <&xbar_admaif28>; + }; + }; + + admaif29_port: port@1d { + reg = <0x1d>; + + admaif29: endpoint { + remote-endpoint = <&xbar_admaif29>; + }; + }; + + admaif30_port: port@1e { + reg = <0x1e>; + + admaif30: endpoint { + remote-endpoint = <&xbar_admaif30>; + }; + }; + + admaif31_port: port@1f { + reg = <0x1f>; + + admaif31: endpoint { + remote-endpoint = <&xbar_admaif31>; + }; + }; + }; + }; + + tegra_sfc1: sfc@9700000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9700000 0x0 0x10000>; + sound-name-prefix = "SFC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in: endpoint { + remote-endpoint = <&xbar_sfc1_in>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out: endpoint { + remote-endpoint = <&xbar_sfc1_out>; + }; + }; + }; + }; + + tegra_sfc2: sfc@9710000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9710000 0x0 0x10000>; + sound-name-prefix = "SFC2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in: endpoint { + remote-endpoint = <&xbar_sfc2_in>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out: endpoint { + remote-endpoint = <&xbar_sfc2_out>; + }; + }; + }; + }; + + tegra_sfc3: sfc@9720000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9720000 0x0 0x10000>; + sound-name-prefix = "SFC3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in: endpoint { + remote-endpoint = <&xbar_sfc3_in>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out: endpoint { + remote-endpoint = <&xbar_sfc3_out>; + }; + }; + }; + }; + + tegra_sfc4: sfc@9730000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9730000 0x0 0x10000>; + sound-name-prefix = "SFC4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in: endpoint { + remote-endpoint = <&xbar_sfc4_in>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out: endpoint { + remote-endpoint = <&xbar_sfc4_out>; + }; + }; + }; + }; + + tegra_ope1: processing-engine@9780000 { + compatible = "nvidia,tegra264-ope", + "nvidia,tegra210-ope"; + reg = <0x0 0x9780000 0x0 0x10000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x9780000 0x0 0x9780000 0x0 0x30000>; + sound-name-prefix = "OPE1"; + + equalizer@9790000 { + compatible = "nvidia,tegra264-peq", + "nvidia,tegra210-peq"; + reg = <0x0 0x9790000 0x0 0x10000>; + }; + + dynamic-range-compressor@97a0000 { + compatible = "nvidia,tegra264-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x0 0x97a0000 0x0 0x10000>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = + <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = + <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + tegra_mvc1: mvc@9800000 { + compatible = "nvidia,tegra264-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x9800000 0x0 0x10000>; + sound-name-prefix = "MVC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in: endpoint { + remote-endpoint = <&xbar_mvc1_in>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out: endpoint { + remote-endpoint = <&xbar_mvc1_out>; + }; + }; + }; + }; + + tegra_mvc2: mvc@9810000 { + compatible = "nvidia,tegra264-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x9810000 0x0 0x10000>; + sound-name-prefix = "MVC2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in: endpoint { + remote-endpoint = <&xbar_mvc2_in>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out: endpoint { + remote-endpoint = <&xbar_mvc2_out>; + }; + }; + }; + }; + + tegra_amixer: amixer@9820000 { + compatible = "nvidia,tegra264-amixer", + "nvidia,tegra210-amixer"; + reg = <0x0 0x9820000 0x0 0x10000>; + sound-name-prefix = "MIXER1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mix_in1: endpoint { + remote-endpoint = <&xbar_mix_in1>; + }; + }; + + port@1 { + reg = <0x1>; + + mix_in2: endpoint { + remote-endpoint = <&xbar_mix_in2>; + }; + }; + + port@2 { + reg = <0x2>; + + mix_in3: endpoint { + remote-endpoint = <&xbar_mix_in3>; + }; + }; + + port@3 { + reg = <0x3>; + + mix_in4: endpoint { + remote-endpoint = <&xbar_mix_in4>; + }; + }; + + port@4 { + reg = <0x4>; + + mix_in5: endpoint { + remote-endpoint = <&xbar_mix_in5>; + }; + }; + + port@5 { + reg = <0x5>; + + mix_in6: endpoint { + remote-endpoint = <&xbar_mix_in6>; + }; + }; + + port@6 { + reg = <0x6>; + + mix_in7: endpoint { + remote-endpoint = <&xbar_mix_in7>; + }; + }; + + port@7 { + reg = <0x7>; + + mix_in8: endpoint { + remote-endpoint = <&xbar_mix_in8>; + }; + }; + + port@8 { + reg = <0x8>; + + mix_in9: endpoint { + remote-endpoint = <&xbar_mix_in9>; + }; + }; + + port@9 { + reg = <0x9>; + + mix_in10: endpoint { + remote-endpoint = <&xbar_mix_in10>; + }; + }; + + mix_out1_port: port@a { + reg = <0xa>; + + mix_out1: endpoint { + remote-endpoint = <&xbar_mix_out1>; + }; + }; + + mix_out2_port: port@b { + reg = <0xb>; + + mix_out2: endpoint { + remote-endpoint = <&xbar_mix_out2>; + }; + }; + + mix_out3_port: port@c { + reg = <0xc>; + + mix_out3: endpoint { + remote-endpoint = <&xbar_mix_out3>; + }; + }; + + mix_out4_port: port@d { + reg = <0xd>; + + mix_out4: endpoint { + remote-endpoint = <&xbar_mix_out4>; + }; + }; + + mix_out5_port: port@e { + reg = <0xe>; + + mix_out5: endpoint { + remote-endpoint = <&xbar_mix_out5>; + }; + }; + }; + }; + + tegra_asrc: asrc@9850000 { + compatible = "nvidia,tegra264-asrc"; + reg = <0x0 0x9850000 0x0 0x10000>; + sound-name-prefix = "ASRC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out6_ep>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0: endpoint { + remote-endpoint = <&admaif0>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1: endpoint { + remote-endpoint = <&admaif1>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2: endpoint { + remote-endpoint = <&admaif2>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3: endpoint { + remote-endpoint = <&admaif3>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4: endpoint { + remote-endpoint = <&admaif4>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5: endpoint { + remote-endpoint = <&admaif5>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6: endpoint { + remote-endpoint = <&admaif6>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7: endpoint { + remote-endpoint = <&admaif7>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8: endpoint { + remote-endpoint = <&admaif8>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9: endpoint { + remote-endpoint = <&admaif9>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10: endpoint { + remote-endpoint = <&admaif10>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11: endpoint { + remote-endpoint = <&admaif11>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12: endpoint { + remote-endpoint = <&admaif12>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13: endpoint { + remote-endpoint = <&admaif13>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14: endpoint { + remote-endpoint = <&admaif14>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15: endpoint { + remote-endpoint = <&admaif15>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16: endpoint { + remote-endpoint = <&admaif16>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17: endpoint { + remote-endpoint = <&admaif17>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18: endpoint { + remote-endpoint = <&admaif18>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19: endpoint { + remote-endpoint = <&admaif19>; + }; + }; + + port@14 { + reg = <0x14>; + + xbar_admaif20: endpoint { + remote-endpoint = <&admaif20>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_admaif21: endpoint { + remote-endpoint = <&admaif21>; + }; + }; + + port@16 { + reg = <0x16>; + + xbar_admaif22: endpoint { + remote-endpoint = <&admaif22>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_admaif23: endpoint { + remote-endpoint = <&admaif23>; + }; + }; + + port@18 { + reg = <0x18>; + + xbar_admaif24: endpoint { + remote-endpoint = <&admaif24>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_admaif25: endpoint { + remote-endpoint = <&admaif25>; + }; + }; + + port@1a { + reg = <0x1a>; + + xbar_admaif26: endpoint { + remote-endpoint = <&admaif26>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_admaif27: endpoint { + remote-endpoint = <&admaif27>; + }; + }; + + port@1c { + reg = <0x1c>; + + xbar_admaif28: endpoint { + remote-endpoint = <&admaif28>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_admaif29: endpoint { + remote-endpoint = <&admaif29>; + }; + }; + + port@1e { + reg = <0x1e>; + + xbar_admaif30: endpoint { + remote-endpoint = <&admaif30>; + }; + }; + + port@1f { + reg = <0x1f>; + + xbar_admaif31: endpoint { + remote-endpoint = <&admaif31>; + }; + }; + + xbar_i2s1_port: port@20 { + reg = <0x20>; + + xbar_i2s1: endpoint { + remote-endpoint = <&i2s1_cif>; + }; + }; + + xbar_i2s2_port: port@21 { + reg = <0x21>; + + xbar_i2s2: endpoint { + remote-endpoint = <&i2s2_cif>; + }; + }; + + xbar_i2s3_port: port@22 { + reg = <0x22>; + + xbar_i2s3: endpoint { + remote-endpoint = <&i2s3_cif>; + }; + }; + + xbar_i2s4_port: port@23 { + reg = <0x23>; + + xbar_i2s4: endpoint { + remote-endpoint = <&i2s4_cif>; + }; + }; + + xbar_i2s5_port: port@24 { + reg = <0x24>; + + xbar_i2s5: endpoint { + remote-endpoint = <&i2s5_cif>; + }; + }; + + xbar_i2s6_port: port@25 { + reg = <0x25>; + + xbar_i2s6: endpoint { + remote-endpoint = <&i2s6_cif>; + }; + }; + + xbar_i2s7_port: port@26 { + reg = <0x26>; + + xbar_i2s7: endpoint { + remote-endpoint = <&i2s7_cif>; + }; + }; + + xbar_i2s8_port: port@27 { + reg = <0x27>; + + xbar_i2s8: endpoint { + remote-endpoint = <&i2s8_cif>; + }; + }; + + xbar_dmic1_port: port@28 { + reg = <0x28>; + + xbar_dmic1: endpoint { + remote-endpoint = <&dmic1_cif>; + }; + }; + + xbar_dmic2_port: port@29 { + reg = <0x29>; + + xbar_dmic2: endpoint { + remote-endpoint = <&dmic2_cif>; + }; + }; + + xbar_dspk1_port: port@2a { + reg = <0x2a>; + + xbar_dspk1: endpoint { + remote-endpoint = <&dspk1_cif>; + }; + }; + + xbar_sfc1_in_port: port@2b { + reg = <0x2b>; + + xbar_sfc1_in: endpoint { + remote-endpoint = <&sfc1_cif_in>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_sfc1_out: endpoint { + remote-endpoint = <&sfc1_cif_out>; + }; + }; + + xbar_sfc2_in_port: port@2d { + reg = <0x2d>; + + xbar_sfc2_in: endpoint { + remote-endpoint = <&sfc2_cif_in>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_sfc2_out: endpoint { + remote-endpoint = <&sfc2_cif_out>; + }; + }; + + xbar_sfc3_in_port: port@2f { + reg = <0x2f>; + + xbar_sfc3_in: endpoint { + remote-endpoint = <&sfc3_cif_in>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_sfc3_out: endpoint { + remote-endpoint = <&sfc3_cif_out>; + }; + }; + + xbar_sfc4_in_port: port@31 { + reg = <0x31>; + + xbar_sfc4_in: endpoint { + remote-endpoint = <&sfc4_cif_in>; + }; + }; + + port@32 { + reg = <0x32>; + + xbar_sfc4_out: endpoint { + remote-endpoint = <&sfc4_cif_out>; + }; + }; + + xbar_mvc1_in_port: port@33 { + reg = <0x33>; + + xbar_mvc1_in: endpoint { + remote-endpoint = <&mvc1_cif_in>; + }; + }; + + port@34 { + reg = <0x34>; + + xbar_mvc1_out: endpoint { + remote-endpoint = <&mvc1_cif_out>; + }; + }; + + xbar_mvc2_in_port: port@35 { + reg = <0x35>; + + xbar_mvc2_in: endpoint { + remote-endpoint = <&mvc2_cif_in>; + }; + }; + + port@36 { + reg = <0x36>; + + xbar_mvc2_out: endpoint { + remote-endpoint = <&mvc2_cif_out>; + }; + }; + + xbar_amx1_in1_port: port@37 { + reg = <0x37>; + + xbar_amx1_in1: endpoint { + remote-endpoint = <&amx1_in1>; + }; + }; + + xbar_amx1_in2_port: port@38 { + reg = <0x38>; + + xbar_amx1_in2: endpoint { + remote-endpoint = <&amx1_in2>; + }; + }; + + xbar_amx1_in3_port: port@39 { + reg = <0x39>; + + xbar_amx1_in3: endpoint { + remote-endpoint = <&amx1_in3>; + }; + }; + + xbar_amx1_in4_port: port@3a { + reg = <0x3a>; + + xbar_amx1_in4: endpoint { + remote-endpoint = <&amx1_in4>; + }; + }; + + port@3b { + reg = <0x3b>; + + xbar_amx1_out: endpoint { + remote-endpoint = <&amx1_out>; + }; + }; + + xbar_amx2_in1_port: port@3c { + reg = <0x3c>; + + xbar_amx2_in1: endpoint { + remote-endpoint = <&amx2_in1>; + }; + }; + + xbar_amx2_in2_port: port@3d { + reg = <0x3d>; + + xbar_amx2_in2: endpoint { + remote-endpoint = <&amx2_in2>; + }; + }; + + xbar_amx2_in3_port: port@3e { + reg = <0x3e>; + + xbar_amx2_in3: endpoint { + remote-endpoint = <&amx2_in3>; + }; + }; + + xbar_amx2_in4_port: port@3f { + reg = <0x3f>; + + xbar_amx2_in4: endpoint { + remote-endpoint = <&amx2_in4>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_amx2_out: endpoint { + remote-endpoint = <&amx2_out>; + }; + }; + + xbar_amx3_in1_port: port@41 { + reg = <0x41>; + + xbar_amx3_in1: endpoint { + remote-endpoint = <&amx3_in1>; + }; + }; + + xbar_amx3_in2_port: port@42 { + reg = <0x42>; + + xbar_amx3_in2: endpoint { + remote-endpoint = <&amx3_in2>; + }; + }; + + xbar_amx3_in3_port: port@43 { + reg = <0x43>; + + xbar_amx3_in3: endpoint { + remote-endpoint = <&amx3_in3>; + }; + }; + + xbar_amx3_in4_port: port@44 { + reg = <0x44>; + + xbar_amx3_in4: endpoint { + remote-endpoint = <&amx3_in4>; + }; + }; + + port@45 { + reg = <0x45>; + + xbar_amx3_out: endpoint { + remote-endpoint = <&amx3_out>; + }; + }; + + xbar_amx4_in1_port: port@46 { + reg = <0x46>; + + xbar_amx4_in1: endpoint { + remote-endpoint = <&amx4_in1>; + }; + }; + + xbar_amx4_in2_port: port@47 { + reg = <0x47>; + + xbar_amx4_in2: endpoint { + remote-endpoint = <&amx4_in2>; + }; + }; + + xbar_amx4_in3_port: port@48 { + reg = <0x48>; + + xbar_amx4_in3: endpoint { + remote-endpoint = <&amx4_in3>; + }; + }; + + xbar_amx4_in4_port: port@49 { + reg = <0x49>; + + xbar_amx4_in4: endpoint { + remote-endpoint = <&amx4_in4>; + }; + }; + + port@4a { + reg = <0x4a>; + + xbar_amx4_out: endpoint { + remote-endpoint = <&amx4_out>; + }; + }; + + xbar_amx5_in1_port: port@4b { + reg = <0x4b>; + + xbar_amx5_in1: endpoint { + remote-endpoint = <&amx5_in1>; + }; + }; + + xbar_amx5_in2_port: port@4c { + reg = <0x4c>; + + xbar_amx5_in2: endpoint { + remote-endpoint = <&amx5_in2>; + }; + }; + + xbar_amx5_in3_port: port@4d { + reg = <0x4d>; + + xbar_amx5_in3: endpoint { + remote-endpoint = <&amx5_in3>; + }; + }; + + xbar_amx5_in4_port: port@4e { + reg = <0x4e>; + + xbar_amx5_in4: endpoint { + remote-endpoint = <&amx5_in4>; + }; + }; + + port@4f { + reg = <0x4f>; + + xbar_amx5_out: endpoint { + remote-endpoint = <&amx5_out>; + }; + }; + + xbar_amx6_in1_port: port@50 { + reg = <0x50>; + + xbar_amx6_in1: endpoint { + remote-endpoint = <&amx6_in1>; + }; + }; + + xbar_amx6_in2_port: port@51 { + reg = <0x51>; + + xbar_amx6_in2: endpoint { + remote-endpoint = <&amx6_in2>; + }; + }; + + xbar_amx6_in3_port: port@52 { + reg = <0x52>; + + xbar_amx6_in3: endpoint { + remote-endpoint = <&amx6_in3>; + }; + }; + + xbar_amx6_in4_port: port@53 { + reg = <0x53>; + + xbar_amx6_in4: endpoint { + remote-endpoint = <&amx6_in4>; + }; + }; + + port@54 { + reg = <0x54>; + + xbar_amx6_out: endpoint { + remote-endpoint = <&amx6_out>; + }; + }; + + xbar_adx1_in_port: port@55 { + reg = <0x55>; + + xbar_adx1_in: endpoint { + remote-endpoint = <&adx1_in>; + }; + }; + + port@56 { + reg = <0x56>; + + xbar_adx1_out1: endpoint { + remote-endpoint = <&adx1_out1>; + }; + }; + + port@57 { + reg = <0x57>; + + xbar_adx1_out2: endpoint { + remote-endpoint = <&adx1_out2>; + }; + }; + + port@58 { + reg = <0x58>; + + xbar_adx1_out3: endpoint { + remote-endpoint = <&adx1_out3>; + }; + }; + + port@59 { + reg = <0x59>; + + xbar_adx1_out4: endpoint { + remote-endpoint = <&adx1_out4>; + }; + }; + + xbar_adx2_in_port: port@5a { + reg = <0x5a>; + + xbar_adx2_in: endpoint { + remote-endpoint = <&adx2_in>; + }; + }; + + port@5b { + reg = <0x5b>; + + xbar_adx2_out1: endpoint { + remote-endpoint = <&adx2_out1>; + }; + }; + + port@5c { + reg = <0x5c>; + + xbar_adx2_out2: endpoint { + remote-endpoint = <&adx2_out2>; + }; + }; + + port@5d { + reg = <0x5d>; + + xbar_adx2_out3: endpoint { + remote-endpoint = <&adx2_out3>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_adx2_out4: endpoint { + remote-endpoint = <&adx2_out4>; + }; + }; + + xbar_adx3_in_port: port@5f { + reg = <0x5f>; + + xbar_adx3_in: endpoint { + remote-endpoint = <&adx3_in>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_adx3_out1: endpoint { + remote-endpoint = <&adx3_out1>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_adx3_out2: endpoint { + remote-endpoint = <&adx3_out2>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_adx3_out3: endpoint { + remote-endpoint = <&adx3_out3>; + }; + }; + + port@63 { + reg = <0x63>; + + xbar_adx3_out4: endpoint { + remote-endpoint = <&adx3_out4>; + }; + }; + + xbar_adx4_in_port: port@64 { + reg = <0x64>; + + xbar_adx4_in: endpoint { + remote-endpoint = <&adx4_in>; + }; + }; + + port@65 { + reg = <0x65>; + + xbar_adx4_out1: endpoint { + remote-endpoint = <&adx4_out1>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_adx4_out2: endpoint { + remote-endpoint = <&adx4_out2>; + }; + }; + + port@67 { + reg = <0x67>; + + xbar_adx4_out3: endpoint { + remote-endpoint = <&adx4_out3>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_adx4_out4: endpoint { + remote-endpoint = <&adx4_out4>; + }; + }; + + xbar_adx5_in_port: port@69 { + reg = <0x69>; + + xbar_adx5_in: endpoint { + remote-endpoint = <&adx5_in>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_adx5_out1: endpoint { + remote-endpoint = <&adx5_out1>; + }; + }; + + port@6b { + reg = <0x6b>; + + xbar_adx5_out2: endpoint { + remote-endpoint = <&adx5_out2>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_adx5_out3: endpoint { + remote-endpoint = <&adx5_out3>; + }; + }; + + port@6d { + reg = <0x6d>; + + xbar_adx5_out4: endpoint { + remote-endpoint = <&adx5_out4>; + }; + }; + + xbar_adx6_in_port: port@6e { + reg = <0x6e>; + + xbar_adx6_in: endpoint { + remote-endpoint = <&adx6_in>; + }; + }; + + port@6f { + reg = <0x6f>; + + xbar_adx6_out1: endpoint { + remote-endpoint = <&adx6_out1>; + }; + }; + + port@70 { + reg = <0x70>; + + xbar_adx6_out2: endpoint { + remote-endpoint = <&adx6_out2>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_adx6_out3: endpoint { + remote-endpoint = <&adx6_out3>; + }; + }; + + port@72 { + reg = <0x72>; + + xbar_adx6_out4: endpoint { + remote-endpoint = <&adx6_out4>; + }; + }; + + xbar_mix_in1_port: port@73 { + reg = <0x73>; + + xbar_mix_in1: endpoint { + remote-endpoint = <&mix_in1>; + }; + }; + + xbar_mix_in2_port: port@74 { + reg = <0x74>; + + xbar_mix_in2: endpoint { + remote-endpoint = <&mix_in2>; + }; + }; + + xbar_mix_in3_port: port@75 { + reg = <0x75>; + + xbar_mix_in3: endpoint { + remote-endpoint = <&mix_in3>; + }; + }; + + xbar_mix_in4_port: port@76 { + reg = <0x76>; + + xbar_mix_in4: endpoint { + remote-endpoint = <&mix_in4>; + }; + }; + + xbar_mix_in5_port: port@77 { + reg = <0x77>; + + xbar_mix_in5: endpoint { + remote-endpoint = <&mix_in5>; + }; + }; + + xbar_mix_in6_port: port@78 { + reg = <0x78>; + + xbar_mix_in6: endpoint { + remote-endpoint = <&mix_in6>; + }; + }; + + xbar_mix_in7_port: port@79 { + reg = <0x79>; + + xbar_mix_in7: endpoint { + remote-endpoint = <&mix_in7>; + }; + }; + + xbar_mix_in8_port: port@7a { + reg = <0x7a>; + + xbar_mix_in8: endpoint { + remote-endpoint = <&mix_in8>; + }; + }; + + xbar_mix_in9_port: port@7b { + reg = <0x7b>; + + xbar_mix_in9: endpoint { + remote-endpoint = <&mix_in9>; + }; + }; + + xbar_mix_in10_port: port@7c { + reg = <0x7c>; + + xbar_mix_in10: endpoint { + remote-endpoint = <&mix_in10>; + }; + }; + + port@7d { + reg = <0x7d>; + + xbar_mix_out1: endpoint { + remote-endpoint = <&mix_out1>; + }; + }; + + port@7e { + reg = <0x7e>; + + xbar_mix_out2: endpoint { + remote-endpoint = <&mix_out2>; + }; + }; + + port@7f { + reg = <0x7f>; + + xbar_mix_out3: endpoint { + remote-endpoint = <&mix_out3>; + }; + }; + + port@80 { + reg = <0x80>; + + xbar_mix_out4: endpoint { + remote-endpoint = <&mix_out4>; + }; + }; + + port@81 { + reg = <0x81>; + + xbar_mix_out5: endpoint { + remote-endpoint = <&mix_out5>; + }; + }; + + xbar_asrc_in1_port: port@82 { + reg = <0x82>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@83 { + reg = <0x83>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@84 { + reg = <0x84>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@85 { + reg = <0x85>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@86 { + reg = <0x86>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@87 { + reg = <0x87>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@88 { + reg = <0x88>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@89 { + reg = <0x89>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@8a { + reg = <0x8a>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@8b { + reg = <0x8b>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@8c { + reg = <0x8c>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@8d { + reg = <0x8d>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@8e { + reg = <0x8e>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; + + xbar_ope1_in_port: port@8f { + reg = <0x8f>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@90 { + reg = <0x90>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + }; + }; + + agic_page0: interrupt-controller@9960000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9961000 0x0 0x1000>, + <0x0 0x9962000 0x0 0x1000>; + interrupts = <GIC_SPI 0x230 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page1: interrupt-controller@9970000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9971000 0x0 0x1000>, + <0x0 0x9972000 0x0 0x1000>; + interrupts = <GIC_SPI 0x231 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page2: interrupt-controller@9980000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9981000 0x0 0x1000>, + <0x0 0x9982000 0x0 0x1000>; + interrupts = <GIC_SPI 0x232 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page3: interrupt-controller@9990000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9991000 0x0 0x1000>, + <0x0 0x9992000 0x0 0x1000>; + interrupts = <GIC_SPI 0x233 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page4: interrupt-controller@99a0000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x99a1000 0x0 0x1000>, + <0x0 0x99a2000 0x0 0x1000>; + interrupts = <GIC_SPI 0x234 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page5: interrupt-controller@99b0000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x99b1000 0x0 0x1000>, + <0x0 0x99b2000 0x0 0x1000>; + interrupts = <GIC_SPI 0x235 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + }; + gpcdma: dma-controller@8400000 { compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma"; reg = <0x0 0x08400000 0x0 0x210000>; @@ -542,6 +3700,22 @@ #iommu-cells = <1>; dma-coherent; }; + + hda@90b0000 { + compatible = "nvidia,tegra264-hda"; + reg = <0x0 0x90b0000 0x0 0x10000>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA264_CLK_AZA_2XBIT>; + clock-names = "hda"; + resets = <&bpmp TEGRA264_RESET_HDA>, + <&bpmp TEGRA264_RESET_HDACODEC>; + reset-names = "hda", "hda2codec_2x"; + interconnects = <&mc TEGRA264_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA264_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu3 TEGRA264_SID_HDA>; + status = "disabled"; + }; }; /* UPHY MMIO */ @@ -625,6 +3799,22 @@ method = "smc"; }; + sound { + compatible = "nvidia,tegra264-audio-graph-card"; + + clocks = <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>, + <&bpmp TEGRA264_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb26..6f34d5ed331c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -33,8 +33,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo +lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb +dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb @@ -72,6 +74,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb @@ -126,6 +130,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-radxa-dragon-q6a.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo @@ -258,6 +263,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb @@ -298,6 +304,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-samsung-r0q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb + +sm8550-hdk-rear-camera-card-dtbs := sm8550-hdk.dtb sm8550-hdk-rear-camera-card.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb @@ -344,6 +354,8 @@ x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb +x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14-lcd.dtb x1p42100-asus-zenbook-a14-lcd-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 08141b41de24..8bf5c5583fc2 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -17,6 +17,9 @@ #include <dt-bindings/interconnect/qcom,qcm2290.h> #include <dt-bindings/interconnect/qcom,rpm-icc.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> / { interrupt-parent = <&intc>; @@ -552,6 +555,13 @@ bias-disable; }; + qup_uart1_default: qup-uart1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-disable; + }; + qup_uart3_default: qup-uart3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; @@ -566,6 +576,13 @@ bias-disable; }; + qup_uart5_default: qup-uart5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-disable; + }; + cci0_default: cci0-default-state { pins = "gpio22", "gpio23"; function = "cci_i2c"; @@ -671,6 +688,43 @@ }; }; + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,qcm2290-lpass-lpi-pinctrl", + "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0 0x0a7c0000 0x0 0x20000>, + <0x0 0x0a950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + lpi_i2s2_active: lpi-i2s2-active-state { + sck-pins { + pins = "gpio10"; + function = "i2s2_clk"; + bias-disable; + drive-strength = <8>; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + bias-disable; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + bias-disable; + drive-strength = <8>; + }; + }; + }; + gcc: clock-controller@1400000 { compatible = "qcom,gcc-qcm2290"; reg = <0x0 0x01400000 0x0 0x1f0000>; @@ -1197,6 +1251,23 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1302,7 +1373,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1418,6 +1489,23 @@ #size-cells = <0>; status = "disabled"; }; + + uart5: serial@4a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart5_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; }; usb: usb@4ef8800 { @@ -1537,7 +1625,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; @@ -1685,25 +1773,25 @@ }; }; - camss: camss@5c6e000 { + camss: camss@5c11000 { compatible = "qcom,qcm2290-camss"; - reg = <0x0 0x5c6e000 0x0 0x1000>, + reg = <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6e000 0x0 0x1000>, <0x0 0x5c75000 0x0 0x1000>, <0x0 0x5c52000 0x0 0x1000>, <0x0 0x5c53000 0x0 0x1000>, <0x0 0x5c66000 0x0 0x400>, <0x0 0x5c68000 0x0 0x400>, - <0x0 0x5c11000 0x0 0x1000>, <0x0 0x5c6f000 0x0 0x4000>, <0x0 0x5c76000 0x0 0x4000>; - reg-names = "csid0", + reg-names = "top", + "csid0", "csid1", "csiphy0", "csiphy1", "csitpg0", "csitpg1", - "top", "vfe0", "vfe1"; @@ -2077,6 +2165,76 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 5b2e88915c2f..9fa70ff6887b 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -203,6 +203,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/apq8096/a530_zap.mbn"; +}; + &hsusb_phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index df8d6e5c1f45..36dd6599402b 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -743,20 +743,32 @@ }; &lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { pins = "gpio12"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; }; - spkr_23_sd_n_active: spkr-23-sd-n-active-state { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio13"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_3_sd_n_active: spkr-3-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; }; @@ -908,12 +920,14 @@ &swr0 { status = "okay"; - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-0 = <&wsa_swr_active>; pinctrl-names = "default"; /* WSA8845, Left Woofer */ left_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; @@ -926,8 +940,10 @@ /* WSA8845, Left Tweeter */ left_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -961,14 +977,16 @@ &swr3 { status = "okay"; - pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-0 = <&wsa2_swr_active>; pinctrl-names = "default"; /* WSA8845, Right Woofer */ right_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -979,8 +997,10 @@ /* WSA8845, Right Tweeter */ right_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_3_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi index 1aead50b8920..4a69852e9176 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi @@ -3,8 +3,8 @@ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -451,8 +451,7 @@ }; &tlmm { - gpio-reserved-ranges = <34 2>, /* TPM LP & INT */ - <44 4>; /* SPI (TPM) */ + gpio-reserved-ranges = <34 2>; /* TPM LP & INT */ pcie4_default: pcie4-default-state { clkreq-n-pins { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi index 621890ada153..6a31a0adf8be 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi @@ -240,6 +240,26 @@ }; }; + pmk8550_sdam_15: nvram@7e00 { + compatible = "qcom,spmi-sdam"; + reg = <0x7e00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7e00 0x100>; + + charge_limit_en: charge-limit-en@73 { + reg = <0x73 0x1>; + }; + + charge_limit_end: charge-limit-end@75 { + reg = <0x75 0x1>; + }; + + charge_limit_delta: charge-limit-delta@76 { + reg = <0x76 0x1>; + }; + }; + pmk8550_gpios: gpio@8800 { compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; reg = <0xb800>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi index 51576d9c935d..a17900eacb20 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -75,7 +75,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_0: l2-cache { compatible = "cache"; @@ -92,7 +91,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu2: cpu@200 { @@ -103,7 +101,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu3: cpu@300 { @@ -114,7 +111,6 @@ next-level-cache = <&l2_0>; power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu4: cpu@10000 { @@ -125,7 +121,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_1: l2-cache { compatible = "cache"; @@ -142,7 +137,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu6: cpu@10200 { @@ -153,7 +147,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu7: cpu@10300 { @@ -164,7 +157,6 @@ next-level-cache = <&l2_1>; power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu8: cpu@20000 { @@ -175,7 +167,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; l2_2: l2-cache { compatible = "cache"; @@ -192,7 +183,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu10: cpu@20200 { @@ -203,7 +193,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu11: cpu@20300 { @@ -214,7 +203,6 @@ next-level-cache = <&l2_2>; power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; }; cpu-map { @@ -371,61 +359,73 @@ cpu_pd0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; }; cpu_pd4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; }; cpu_pd8: power-domain-cpu8 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd9: power-domain-cpu9 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd10: power-domain-cpu10 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cpu_pd11: power-domain-cpu11 { #power-domain-cells = <0>; power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; }; cluster_pd0: power-domain-cpu-cluster0 { @@ -807,7 +807,34 @@ <0>, <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, - <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; @@ -3240,74 +3267,132 @@ pcie3_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 1 x4 and GEN 2 x2 */ - opp-10000000 { + /* 2.5 GT/s x4 */ + opp-10000000-1 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <1>; }; - /* GEN 1 x8 and GEN 2 x4 */ - opp-20000000 { + /* 2.5 GT/s x8 */ + opp-20000000-1 { opp-hz = /bits/ 64 <20000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <2000000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x8 */ - opp-40000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x4 */ + opp-20000000-2 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x8 */ + opp-40000000-2 { opp-hz = /bits/ 64 <40000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <4000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x4 */ + opp-32000000-3 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x8 */ + opp-64000000-3 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 3 x4 and GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; - /* GEN 3 x8 and GEN 4 x4 */ - opp-64000000 { + /* 16 GT/s x4 */ + opp-64000000-4 { opp-hz = /bits/ 64 <64000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <7876000 1>; + opp-level = <4>; }; - /* GEN 4 x8 */ - opp-128000000 { + /* 16 GT/s x8 */ + opp-128000000-4 { opp-hz = /bits/ 64 <128000000>; required-opps = <&rpmhpd_opp_svs>; opp-peak-kBps = <15753000 1>; + opp-level = <4>; }; }; @@ -4922,6 +5007,7 @@ interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; status = "disabled"; @@ -4939,15 +5025,8 @@ dma-coherent; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_2_dwc3_hs: endpoint { - }; + port { + usb_2_dwc3_hs: endpoint { }; }; }; @@ -5466,7 +5545,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae90000 0 0x200>, <0 0x0ae90200 0 0x200>, - <0 0x0ae90400 0 0x600>, + <0 0x0ae90400 0 0xc00>, <0 0x0ae91000 0 0x400>, <0 0x0ae91400 0 0x400>; @@ -5554,7 +5633,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae98000 0 0x200>, <0 0x0ae98200 0 0x200>, - <0 0x0ae98400 0 0x600>, + <0 0x0ae98400 0 0xc00>, <0 0x0ae99000 0 0x400>, <0 0x0ae99400 0 0x400>; @@ -5642,7 +5721,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0ae9a000 0 0x200>, <0 0x0ae9a200 0 0x200>, - <0 0x0ae9a400 0 0x600>, + <0 0x0ae9a400 0 0xc00>, <0 0x0ae9b000 0 0x400>, <0 0x0ae9b400 0 0x400>; @@ -5729,7 +5808,7 @@ compatible = "qcom,x1e80100-dp"; reg = <0 0x0aea0000 0 0x200>, <0 0x0aea0200 0 0x200>, - <0 0x0aea0400 0 0x600>, + <0 0x0aea0400 0 0xc00>, <0 0x0aea1000 0 0x400>, <0 0x0aea1400 0 0x400>; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index ef2b52f3597d..eb393f3fd728 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -3,7 +3,7 @@ * IPQ5424 device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -13,6 +13,7 @@ #include <dt-bindings/reset/qcom,ipq5424-gcc.h> #include <dt-bindings/interconnect/qcom,ipq5424.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <2>; @@ -57,6 +58,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -82,6 +84,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_100: l2-cache { compatible = "cache"; @@ -101,6 +104,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_200: l2-cache { compatible = "cache"; @@ -120,6 +124,7 @@ clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_300: l2-cache { compatible = "cache"; @@ -213,7 +218,7 @@ }; tfa@8a832000 { - reg = <0x0 0x8a832000 0x0 0x7d000>; + reg = <0x0 0x8a832000 0x0 0x80000>; no-map; status = "disabled"; }; @@ -815,6 +820,36 @@ #interconnect-cells = <1>; }; + clock-controller@39b00000 { + compatible = "qcom,ipq5424-nsscc"; + reg = <0 0x39b00000 0 0x100000>; + clocks = <&cmn_pll IPQ5424_XO_24MHZ_CLK>, + <&cmn_pll IPQ5424_NSS_300MHZ_CLK>, + <&cmn_pll IPQ5424_PPE_375MHZ_CLK>, + <&gcc GPLL0_OUT_AUX>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&gcc GCC_NSSCC_CLK>; + clock-names = "xo", + "nss", + "ppe", + "gpll0_out", + "uniphy0_rx", + "uniphy0_tx", + "uniphy1_rx", + "uniphy1_tx", + "uniphy2_rx", + "uniphy2_tx", + "bus"; + #clock-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + pcie3: pcie@40000000 { compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; reg = <0x0 0x40000000 0x0 0xf1c>, @@ -1235,18 +1270,28 @@ thermal-sensors = <&tsens 14>; trips { - cpu-critical { + cpu0_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu0_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal { @@ -1254,18 +1299,28 @@ thermal-sensors = <&tsens 12>; trips { - cpu-critical { + cpu1_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu1_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal { @@ -1273,18 +1328,28 @@ thermal-sensors = <&tsens 11>; trips { - cpu-critical { + cpu2_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu2_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal { @@ -1292,18 +1357,28 @@ thermal-sensors = <&tsens 13>; trips { - cpu-critical { + cpu3_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu3_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; wcss-tile2-thermal { diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index 4b04dea57ec8..c2ccbb67f800 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -3338,6 +3338,86 @@ }; }; + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1c { + reg = <0x1c>; + + qdss_tpda_in28: endpoint { + remote-endpoint = <&spdm_tpdm_out>; + }; + }; + }; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&qdss_dl_funnel_in0>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06005000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + qdss_dl_funnel_in0: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + }; + + out-ports { + port { + qdss_dl_funnel_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; + }; + }; + + tpdm@600f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0600f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + spdm_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in28>; + }; + }; + }; + }; + + cti@6010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06010000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; @@ -3357,6 +3437,14 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_dl_funnel_out>; + }; + }; + port@7 { reg = <7>; funnel0_in7: endpoint { @@ -3471,6 +3559,38 @@ }; }; + cti@6b00000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b00000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b01000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b01000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b02000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b02000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b03000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06b04000 0 0x1000>; @@ -3490,6 +3610,14 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + + swao_funnel_in6: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + port@7 { reg = <7>; swao_funnel_in: endpoint { @@ -3548,6 +3676,170 @@ }; }; + tpda@6b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&swao_prio0_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&swao_prio1_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&swao_prio2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&swao_prio3_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&swao_tpdm_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&swao_funnel_in6>; + }; + }; + }; + }; + + tpdm@6b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio0_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@6b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio1_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@6b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio2_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@6b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio3_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + swao_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + cti@6b11000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b11000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; @@ -3885,6 +4177,12 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sc7280-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sc7280-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -5074,6 +5372,8 @@ phys = <&mdss_dsi_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso new file mode 100644 index 000000000000..4600d5441cce --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* + * Camera Sensor overlay on top of leman evk core kit. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,sa8775p-camcc.h> +#include <dt-bindings/gpio/gpio.h> + +&{/} { + vreg_cam1_1p8: vreg_cam1_1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_1p8"; + startup-delay-us = <10000>; + enable-active-high; + gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&camcc { + status = "okay"; +}; + +&camss { + vdda-pll-supply = <&vreg_l1c>; + vdda-phy-supply = <&vreg_l4a>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep1>; + }; + }; + }; +}; + +&cci1 { + pinctrl-0 = <&cci1_0_default>; + pinctrl-1 = <&cci1_0_sleep>; + + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam1_default>; + pinctrl-names = "default"; + + clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_s4a>; + avdd-supply = <&vreg_cam1_1p8>; + + port { + imx577_ep1: endpoint { + clock-lanes = <7>; + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy1_ep>; + }; + }; + }; +}; + +&tlmm { + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio73"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + rst-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c7dc9b8f4457..b40fa203e4a2 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -501,6 +502,20 @@ }; }; +&i2c19 { + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; +}; + &iris { firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn"; @@ -587,15 +602,28 @@ status = "okay"; }; +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qup_i2c19_default { + drive-strength = <2>; + bias-pull-up; +}; + &qupv3_id_0 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_2 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi index 1369c3d43f86..341119fc8244 100644 --- a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi @@ -132,6 +132,15 @@ }; }; + pmm8654au_0_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, + <0x6200>; + reg-names = "rtc", + "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pmm8654au_0_gpios: gpio@8800 { compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index cf685cb186ed..0b154d57ba24 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -3901,6 +3901,32 @@ status = "disabled"; }; + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_0_qmpphy: phy@88e8000 { compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; reg = <0 0x088e8000 0 0x2000>; @@ -3925,6 +3951,36 @@ status = "disabled"; }; + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + refgen: regulator@891c000 { + compatible = "qcom,sa8775p-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + usb_0: usb@a600000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a600000 0 0xfc100>; @@ -3973,43 +4029,6 @@ status = "disabled"; }; - usb_1_hsphy: phy@88e6000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e6000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB2_PHY_SEC_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_1_qmpphy: phy@88ea000 { - compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; - reg = <0 0x088ea000 0 0x2000>; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "aux", "ref", "com_aux", "pipe"; - - resets = <&gcc GCC_USB3_PHY_SEC_BCR>, - <&gcc GCC_USB3PHY_PHY_SEC_BCR>; - reset-names = "phy", "phy_phy"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - #clock-cells = <0>; - clock-output-names = "usb3_sec_phy_pipe_clk_src"; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_1: usb@a800000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a800000 0 0xfc100>; @@ -4058,19 +4077,6 @@ status = "disabled"; }; - usb_2_hsphy: phy@88e7000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e7000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB3_PHY_TERT_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_2: usb@a400000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a400000 0 0xfc100>; @@ -4106,6 +4112,7 @@ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; iommus = <&apps_smmu 0x020 0x0>; @@ -4899,6 +4906,8 @@ operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -4981,6 +4990,8 @@ operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -6812,11 +6823,12 @@ "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC1_GDSC>; @@ -6853,11 +6865,12 @@ "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC0_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index e72cf6725a52..bb35893da73d 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -9,8 +9,8 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. Monaco EVK"; @@ -401,10 +401,12 @@ }; &qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi index a94b0bfa98dc..e990d7367719 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi @@ -18,7 +18,6 @@ reg = <0x6100>, <0x6200>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - allow-set-time; }; pmm8620au_0_gpios: gpio@8800 { diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 8d78ccac411e..816fa2af8a9a 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -20,6 +20,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -4294,6 +4295,12 @@ status = "disabled"; }; + refgen: regulator@891c000 { + compatible = "qcom,qcs8300-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + gpu: gpu@3d00000 { compatible = "qcom,adreno-623.0", "qcom,adreno"; reg = <0x0 0x03d00000 0x0 0x40000>, diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 887764dc55b2..93d5ea279cff 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -79,6 +79,19 @@ }; }; + reg_ts_vcca: regulator-vcca-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vcca-ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&ts_vcca_default>; + pinctrl-names = "default"; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; @@ -176,6 +189,25 @@ }; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,hx8527e", "himax,hx852es"; + reg = <0x48>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + + pinctrl-0 = <&ts_int_reset_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>; + }; +}; + &blsp_uart2 { status = "okay"; pinctrl-0 = <&blsp_uart2_console_default>; @@ -338,6 +370,20 @@ bias-disable; }; + ts_int_reset_default: ts-int-reset-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_vcca_default: ts-vcca-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index e7f265e3c2ab..e33453c3e51e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -5,7 +5,7 @@ /* SM5504 MUIC instead of SM5502 */ /delete-node/ &muic; -/* Touchscreen varies depending on model variant */ +/* IST3038 instead of Zinitix BT541 */ /delete-node/ &touchscreen; &blsp_i2c1 { @@ -24,6 +24,26 @@ }; }; +&blsp_i2c5 { + touchscreen: touchscreen@50 { + compatible = "imagis,ist3038"; + reg = <0x50>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + + vdd-supply = <®_vdd_tsp_a>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; +}; + /* On rossa backlight is controlled with MIPI DCS commands */ &clk_pwm { status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index 3413b0970c4a..1981bb71f6a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -16,26 +16,6 @@ constant-charge-voltage-max-microvolt = <4400000>; }; -&blsp_i2c5 { - touchscreen@50 { - compatible = "imagis,ist3038"; - reg = <0x50>; - - interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; - - touchscreen-size-x = <480>; - touchscreen-size-y = <800>; - - vdd-supply = <®_vdd_tsp_a>; - vddio-supply = <&pm8916_l6>; - - pinctrl-0 = <&tsp_int_default>; - pinctrl-names = "default"; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; -}; - &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts new file mode 100644 index 000000000000..91837ff940f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Barnabas Czeman + */ +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +#include "msm8937.dtsi" +#include "pm8937.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi 3S (land)"; + compatible = "xiaomi,land", "qcom,msm8937"; + chassis-type = "handset"; + + qcom,msm-id = <QCOM_ID_MSM8937 0x0>; + qcom,board-id = <0x1000b 1>, <0x2000b 1>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4100000>; + constant-charge-current-max-microamp = <1000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@8dd01000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volup { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + irled { + compatible = "gpio-ir-tx"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + reserved-memory { + reserved@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer: memory@8dd01000 { + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8937_l10>; + vio-supply = <&pm8937_l5>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen@3e { + compatible = "edt,edt-ft5306"; + reg = <0x3e>; + + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; +}; + +&pm8937_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8937_spmi_regulators { + /* APC */ + pm8937_s5: s5 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&pmi8950_wled { + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdc2_cmd_default { + drive-strength = <12>; +}; + +&sdc2_data_default { + drive-strength = <12>; +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <20 4>; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi new file mode 100644 index 000000000000..b93621080989 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi @@ -0,0 +1,2133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + */ + +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> +#include <dt-bindings/clock/qcom,gcc-msm8917.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; + }; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-unified; + }; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu-map { + /* Little Cores */ + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + /* Big Cores */ + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8937", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", + "bus", + "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + device_type = "memory"; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + qseecom_mem: reserved@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + rmtfs@92100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x92100000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + adsp_mem: adsp { + size = <0x0 0x1100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + wcnss_mem: wcnss { + size = <0x0 0x700000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + venus_mem: venus { + size = <0x0 0x400000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + }; + + cpu_opp_table_c0: opp-table-c0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + }; + + cpu_opp_table_c1: opp-table-c1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs1 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8937", "qcom,smd-rpm"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + + qfprom: qfprom@a4000 { + compatible = "qcom,msm8937-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@1d8 { + reg = <0x1d8 0x1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@1d9 { + reg = <0x1d9 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@1d9 { + reg = <0x1d9 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@1da { + reg = <0x1da 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@1db { + reg = <0x1db 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@1dc { + reg = <0x1dc 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@1dc { + reg = <0x1dc 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@1dd { + reg = <0x1dd 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@1de { + reg = <0x1de 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@1df { + reg = <0x1df 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@210 { + reg = <0x210 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@210 { + reg = <0x210 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p2@211 { + reg = <0x211 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@211 { + reg = <0x211 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@212 { + reg = <0x212 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@213 { + reg = <0x213 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@214 { + reg = <0x214 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@214 { + reg = <0x214 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@215 { + reg = <0x215 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@216 { + reg = <0x216 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@217 { + reg = <0x217 0x1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@230 { + reg = <0x230 0x1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@230 { + reg = <0x230 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1: s10-p1@231 { + reg = <0x231 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10-p2@232 { + reg = <0x232 0x1>; + bits = <2 6>; + }; + + gpu_speed_bin: gpu-speed-bin@201b { + reg = <0x201b 0x1>; + bits = <7 1>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0006c000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", + "ahb", + "sleep"; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", + "por"; + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8937-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_default: blsp1-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_default: blsp2-i2c1-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + cs-pins { + pins = "gpio10"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + }; + + blsp1_spi3_sleep: blsp1-spi3-sleep-state { + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + cs0-pins { + pins = "gpio47"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp2_spi2_sleep: blsp2-spi2-sleep-state { + cs0-pins { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_cmd_default: cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + sdc2_data_default: data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-active-state { + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8937"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8937", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x3000>; + reg-names = "mdss_phys", + "vbif_phys"; + ranges; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8937-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi0_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a94a00 0xd4>, + <0x01a94400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>, + <&gcc MSM8937_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc MSM8937_GCC_MDSS_BYTE1_CLK>, + <&gcc MSM8937_GCC_MDSS_PCLK1_CLK>, + <&gcc MSM8937_GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi1_phy>; + + operating-points-v2 = <&mdss_dsi1_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + + mdss_dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi1_phy: phy@1a96a00 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a96a00 0xd4>, + <0x01a96400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + + gpu: gpu@1c00000 { + compatible = "qcom,adreno-505.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + #cooling-cells = <2>; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc MSM8937_GCC_OXILI_TIMER_CLK>, + <&gcc MSM8937_GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + adreno_smmu: iommu@1c40000 { + compatible = "qcom,msm8996-smmu-v2", + "qcom,adreno-smmu", + "qcom,smmu-v2"; + reg = <0x01c40000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + + clocks = <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_OXILI_AHB_CLK>; + clock-names = "bus", + "iface"; + + power-domains = <&gcc MSM8937_OXILI_CX_GDSC>; + }; + + apps_iommu: iommu@1e20000 { + compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", + "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x500>, + <0x07824000 0x800>; + reg-names = "hc", + "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x500>, + <0x07864000 0x800>; + reg-names = "hc", + "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <12>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 2>, + <&blsp1_dma 3>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, + <&blsp1_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_spi3_default>; + pinctrl-1 = <&blsp1_spi3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 10>, + <&blsp1_dma 11>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1d000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <10>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp2_i2c1: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 4>, + <&blsp2_dma 5>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi2: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 6>, + <&blsp2_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_spi2_default>; + pinctrl-1 = <&blsp2_spi2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78db000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078db000 0x200>, + <0x078db200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", + "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", + "dxe", + "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + power-domains = <&rpmpd MSM8937_VDDCX>, + <&rpmpd MSM8937_VDDMX>; + power-domain-names = "cx", + "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs1 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", + "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + apcs1: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + thermal_zones: thermal-zones { + aoss-thermal { + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdm-core-thermal { + thermal-sensors = <&tsens 1>; + + trips { + mdm_core_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-thermal { + thermal-sensors = <&tsens 2>; + + trips { + q6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + thermal-sensors = <&tsens 3>; + + trips { + camera_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens 4>; + + cooling-maps { + map0 { + trip = <&cpuss1_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + thermal-sensors = <&tsens 5>; + + cooling-maps { + map0 { + trip = <&cpu4_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu4_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu4_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + thermal-sensors = <&tsens 6>; + + cooling-maps { + map0 { + trip = <&cpu5_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu5_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu5_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + thermal-sensors = <&tsens 7>; + + cooling-maps { + map0 { + trip = <&cpu6_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu6_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu6_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + thermal-sensors = <&tsens 8>; + + cooling-maps { + map0 { + trip = <&cpu7_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu7_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu7_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens 9>; + + cooling-maps { + map0 { + trip = <&cpuss0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens 10>; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts new file mode 100644 index 000000000000..ebb548e62e02 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Asus ZenFone 2 Laser/Selfie (1080p)"; + compatible = "asus,z00t", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l8>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&imu_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l8>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + pinctrl-0 = <&blsp_uart2_console_default>; + pinctrl-1 = <&blsp_uart2_console_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; + + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + imu_default: imu-default-state { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio112"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 220eeb31fdc7..0bb9e3d8f714 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -27,10 +27,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index f772618e80c7..1d7b27c5aff6 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -28,10 +28,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index bd3f39e1b98f..3c6a40212a8d 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -91,10 +91,8 @@ }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c75b522f6eba..b341dec27193 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1333,7 +1333,7 @@ }; }; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index 443599a5a5dd..f8ab03f106a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,10 +39,8 @@ }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts index 33d84ac541e1..1cc33c3123a4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts @@ -91,10 +91,8 @@ }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; }; &mdp_smmu { diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 3d3b1cd97cc3..5bd91a5cd124 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -22,19 +22,19 @@ channel@0 { reg = <VADC_USBIN>; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "usbin"; }; channel@1 { reg = <VADC_DCIN>; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "dcin"; }; channel@2 { reg = <VADC_VCHG_SNS>; - qcom,pre-scaling = <1 1>; + qcom,pre-scaling = <1 3>; label = "vchg_sns"; }; @@ -55,6 +55,14 @@ qcom,pre-scaling = <1 1>; label = "chg_temp"; }; + + channel@e { + reg = <VADC_GND_REF>; + }; + + channel@f { + reg = <VADC_VDD_VADC>; + }; }; pmi8950_mpps: mpps@a000 { diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi index 10d26958d3c6..2cecd2dd0de8 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi +++ b/arch/arm64/boot/dts/qcom/purwa.dtsi @@ -3,8 +3,8 @@ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. */ -/* X1P42100 is heavily based on X1E80100, with some meaningful differences */ -#include "x1e80100.dtsi" +/* X1P42100 is heavily based on hamoa, with some meaningful differences */ +#include "hamoa.dtsi" /delete-node/ &bwmon_cluster0; /delete-node/ &cluster_pd2; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 519e458e1a89..455e5c9bb072 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -16,7 +16,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -47,6 +47,8 @@ stride = <(1224 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + vci-supply = <&vreg_oled_vci>; + dvdd-supply = <&vreg_oled_dvdd>; }; }; @@ -193,6 +195,19 @@ pinctrl-names = "default"; }; + vreg_vtof_ldo_2p8: regulator-vtof-ldo-2p8 { + compatible = "regulator-fixed"; + regulator-name = "VTOF_LDO_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <233>; + + gpio = <&tlmm 141 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + reserved-memory { cont_splash_mem: cont-splash@e1000000 { reg = <0x0 0xe1000000 0x0 0x2300000>; @@ -627,6 +642,15 @@ }; &cci0_i2c1 { + camera_imx858_dw9800k: actuator@e { + compatible = "dongwoon,dw9800k"; + reg = <0x0e>; + vdd-supply = <&vreg_afvdd_2p8>; + + dongwoon,sac-mode = <1>; + dongwoon,vcm-prescale = <16>; + }; + /* IMX858 @ 29 */ eeprom@54 { @@ -749,6 +773,8 @@ regulator-name = "vreg_l6p"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1904000>; + /* Pull-up for CCI I2C busses */ + regulator-always-on; }; vreg_l7p: ldo7 { @@ -780,7 +806,16 @@ }; }; - /* AW86927FCR haptics @ 5a */ + vibrator@5a { + compatible = "awinic,aw86927"; + reg = <0x5a>; + + interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&aw86927_int_default>; + pinctrl-names = "default"; + }; }; &i2c2 { @@ -839,6 +874,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; @@ -1318,6 +1358,13 @@ bias-disable; output-high; }; + + aw86927_int_default: aw86927-int-default-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart5 { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 73fce639370c..089a027c57d5 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -13,7 +13,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts index 251e72f11428..bf18c4852081 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts @@ -11,7 +11,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts index eb8efba1b9dd..797f37596bf1 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -14,7 +14,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -118,6 +118,11 @@ no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: rmtfs@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -130,8 +135,6 @@ thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -144,8 +147,6 @@ }; chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -158,8 +159,6 @@ }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -172,8 +171,6 @@ }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -186,8 +183,6 @@ }; rear-cam-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -200,8 +195,6 @@ }; sdm-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -214,8 +207,6 @@ }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -568,6 +559,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &pm7250b_adc { channel@4d { reg = <ADC5_AMUX_THM1_100K_PU>; @@ -614,6 +610,46 @@ }; }; +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &pmk8350_adc_tm { status = "okay"; @@ -857,7 +893,7 @@ &uart7 { /delete-property/interrupts; interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; pinctrl-names = "default", "sleep"; @@ -920,10 +956,6 @@ remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_dp_qmpphy_out { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdda-pll-supply = <&vreg_l10c>; vdda18-supply = <&vreg_l1c>; @@ -950,6 +982,16 @@ status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&venus { + firmware-name = "qcom/qcm6490/SHIFT/otter/venus.mbn"; + + status = "okay"; +}; + &wifi { qcom,calibration-variant = "SHIFTphone_8"; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 705ea71b07a1..be67eb173046 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -7,10 +7,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> -#include "sm6150.dtsi" +#include "talos.dtsi" #include "pm8150.dtsi" / { - model = "Qualcomm Technologies, Inc. QCS615 Ride"; + model = "Qualcomm Technologies, Inc. QCS615 Ride (IQ-615 Beta EVK)"; compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150"; chassis-type = "embedded"; @@ -39,6 +39,18 @@ }; }; + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "mini"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge_out>; + }; + }; + }; + vreg_conn_1p8: regulator-conn-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -65,6 +77,64 @@ regulator-always-on; }; + vreg_12p0: regulator-vreg-12p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_1p0: regulator-vreg-1p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_1p8: regulator-vreg-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_3p0: regulator-vreg-3p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_5p0: regulator-vreg-5p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; @@ -288,6 +358,86 @@ }; }; +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + io_expander: pinctrl@3e { + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + semtech,probe-reset; + }; + + i2c-mux@77 { + compatible = "nxp,pca9542"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l11a>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&dsi2dp_bridge_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l5a>; + status = "okay"; +}; + &pcie { perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; @@ -398,6 +548,7 @@ pins = "gpio98"; function = "gpio"; bias-pull-down; + drive-strength = <16>; output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts new file mode 100644 index 000000000000..bb5a42b038f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts @@ -0,0 +1,1095 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kodiak.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ +#include "qcs6490-audioreach.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Radxa Dragon Q6A"; + compatible = "radxa,dragon-q6a", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &uart5; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob_3p296>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + qcom,hphl-jack-type-normally-closed; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb2_1_con: connector-0 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_1_connector: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + }; + + usb2_2_con: connector-1 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_2_connector: endpoint { + remote-endpoint = <&usb_hub_2_2>; + }; + }; + }; + + usb2_3_con: connector-2 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_3_connector: endpoint { + remote-endpoint = <&usb_hub_2_3>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&user_led>; + pinctrl-names = "default"; + + user-led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@84800000 { + reg = <0x0 0x84800000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@87000000 { + reg = <0x0 0x87000000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@88e00000 { + reg = <0x0 0x88e00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@89500000 { + reg = <0x0 0x89500000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@89a00000 { + reg = <0x0 0x89a00000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + thermal-zones { + msm-skin-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + }; + + quiet-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + }; + + ufs-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + }; + + xo-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v_peri: regulator-vcc-5v-peri { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v_peri"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vph_pwr>; + + regulator-boot-on; + regulator-always-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>; + + vreg_s1b_1p84: smps1 { + regulator-name = "vreg_s1b_1p84"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p536: smps7 { + regulator-name = "vreg_s7b_0p536"; + regulator-min-microvolt = <536000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-name = "vreg_s8b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1496000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-name = "vreg_l17b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p84>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p536>; + vdd-bob-supply = <&vph_pwr>; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1976000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3032000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +/* Pin 13, 15 in GPIO header */ +&i2c0 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 27, 28 in GPIO header */ +&i2c2 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 3, 5 in GPIO header */ +&i2c6 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&i2c10 { + qcom,enable-gsi-dma; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t11"; + reg = <0x68>; + }; +}; + +/* External touchscreen */ +&i2c13 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>; + pinctrl-names = "default"; + + /* Support for QPS615 PCIe switch */ + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x400 &apps_smmu 0x1c88 0x1>, + <0x500 &apps_smmu 0x1c89 0x1>, + <0x501 &apps_smmu 0x1c90 0x1>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + pm7325_adc_default: adc-default-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + msm-skin-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + ufs-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_vadc { + pinctrl-0 = <&pm7325_adc_default>; + pinctrl-names = "default"; + + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = <PM7325_ADC7_DIE_TEMP>; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "msm_skin_therm"; + }; + + channel@14a { + /* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */ + reg = <PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "ufs_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qspi { + /* It's not possible to use QSPI with iommu */ + /* due to an error in qcom_smmu_write_s2cr */ + /delete-property/ iommus; + + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, + <&qspi_data1>, <&qspi_data23>; + pinctrl-1 = <&qspi_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + spi_flash: flash@0 { + compatible = "winbond,w25q256", "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p96>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + compatible = "qcom,qcs6490-rb3gen2-sndcard"; + model = "QCS6490-Radxa-Dragon-Q6A"; + + audio-routing = "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; +}; + +/* Pin 11, 29, 31, 32 in GPIO header */ +&spi7 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 19, 21, 23, 24, 26 in GPIO header */ +&spi12 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 22, 33, 36, 37 in GPIO header */ +&spi14 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&tlmm { + gpio-line-names = + /* GPIO_0 ~ GPIO_3 */ + "PIN_13", "PIN_15", "", "", + /* GPIO_4 ~ GPIO_7 */ + "", "", "", "", + /* GPIO_8 ~ GPIO_11 */ + "PIN_27", "PIN_28", "", "", + /* GPIO_12 ~ GPIO_15 */ + "", "", "", "", + /* GPIO_16 ~ GPIO_19 */ + "", "", "", "", + /* GPIO_20 ~ GPIO_23 */ + "", "", "PIN_8", "PIN_10", + /* GPIO_24 ~ GPIO_27 */ + "PIN_3", "PIN_5", "PIN_16", "PIN_27", + /* GPIO_28 ~ GPIO_31 */ + "PIN_31", "PIN_11", "PIN_32", "PIN_29", + /* GPIO_32 ~ GPIO_35 */ + "", "", "", "", + /* GPIO_36 ~ GPIO_39 */ + "", "", "", "", + /* GPIO_40 ~ GPIO_43 */ + "", "", "", "", + /* GPIO_44 ~ GPIO_47 */ + "", "", "", "", + /* GPIO_48 ~ GPIO_51 */ + "PIN_21", "PIN_19", "PIN_23", "PIN_24", + /* GPIO_52 ~ GPIO_55 */ + "", "", "", "PIN_26", + /* GPIO_56 ~ GPIO_59 */ + "PIN_33", "PIN_22", "PIN_37", "PIN_36", + /* GPIO_60 ~ GPIO_63 */ + "", "", "", "", + /* GPIO_64 ~ GPIO_67 */ + "", "", "", "", + /* GPIO_68 ~ GPIO_71 */ + "", "", "", "", + /* GPIO_72 ~ GPIO_75 */ + "", "", "", "", + /* GPIO_76 ~ GPIO_79 */ + "", "", "", "", + /* GPIO_80 ~ GPIO_83 */ + "", "", "", "", + /* GPIO_84 ~ GPIO_87 */ + "", "", "", "", + /* GPIO_88 ~ GPIO_91 */ + "", "", "", "", + /* GPIO_92 ~ GPIO_95 */ + "", "", "", "", + /* GPIO_96 ~ GPIO_99 */ + "PIN_7", "PIN_12", "PIN_38", "PIN_40", + /* GPIO_100 ~ GPIO_103 */ + "PIN_35", "", "", "", + /* GPIO_104 ~ GPIO_107 */ + "", "", "", "", + /* GPIO_108 ~ GPIO_111 */ + "", "", "", "", + /* GPIO_112 ~ GPIO_115 */ + "", "", "", "", + /* GPIO_116 ~ GPIO_119 */ + "", "", "", "", + /* GPIO_120 ~ GPIO_123 */ + "", "", "", "", + /* GPIO_124 ~ GPIO_127 */ + "", "", "", "", + /* GPIO_128 ~ GPIO_131 */ + "", "", "", "", + /* GPIO_132 ~ GPIO_135 */ + "", "", "", "", + /* GPIO_136 ~ GPIO_139 */ + "", "", "", "", + /* GPIO_140 ~ GPIO_143 */ + "", "", "", "", + /* GPIO_144 ~ GPIO_147 */ + "", "", "", "", + /* GPIO_148 ~ GPIO_151 */ + "", "", "", "", + /* GPIO_152 ~ GPIO_155 */ + "", "", "", "", + /* GPIO_156 ~ GPIO_159 */ + "", "", "", "", + /* GPIO_160 ~ GPIO_163 */ + "", "", "", "", + /* GPIO_164 ~ GPIO_167 */ + "", "", "", "", + /* GPIO_168 ~ GPIO_171 */ + "", "", "", "", + /* GPIO_172 ~ GPIO_174 */ + "", "", ""; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gpio"; + output-disable; + }; + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + user_led: user-led-state { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart5 { + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + /* Onboard USB 2.0 hub */ + usb_hub_2_x: hub@1 { + compatible = "usb1a40,0101"; + reg = <1>; + vdd-supply = <&vcc_5v_peri>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb2_1_connector>; + }; + }; + + port@2 { + reg = <2>; + + usb_hub_2_2: endpoint { + remote-endpoint = <&usb2_2_connector>; + }; + }; + + port@3 { + reg = <3>; + + usb_hub_2_3: endpoint { + remote-endpoint = <&usb2_3_connector>; + }; + }; + }; + + /* FCU760K Wi-Fi & Bluetooth module */ + wifi@4 { + compatible = "usba69c,8d80"; + reg = <4>; + }; + }; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie0_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_clk { + bias-disable; + drive-strength = <16>; +}; + +&qspi_cs0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data23 { + bias-disable; + drive-strength = <8>; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 18cea8812001..f29a352b0288 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -14,7 +14,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" @@ -217,6 +217,13 @@ }; }; + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + thermal-zones { sdm-skin-thermal { thermal-sensors = <&pmk8350_adc_tm 3>; @@ -255,13 +262,6 @@ }; }; - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - wcn6750-pmu { compatible = "qcom,wcn6750-pmu"; pinctrl-0 = <&bt_en>; @@ -335,8 +335,6 @@ vdd-s8-supply = <&vph_pwr>; vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; vdd-l2-l7-supply = <&vreg_bob_3p296>; - vdd-l3-supply = <&vreg_s2b_0p876>; - vdd-l5-supply = <&vreg_s2b_0p876>; vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; vdd-l8-supply = <&vreg_s7b_0p972>; vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; @@ -349,12 +347,6 @@ regulator-max-microvolt = <2040000>; }; - vreg_s2b_0p876: smps2 { - regulator-name = "vreg_s2b_0p876"; - regulator-min-microvolt = <570070>; - regulator-max-microvolt = <1050000>; - }; - vreg_s7b_0p972: smps7 { regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; @@ -385,27 +377,13 @@ vreg_l3b_0p504: ldo3 { regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; - regulator-max-microvolt = <910000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4b_0p752: ldo4 { - regulator-name = "vreg_l4b_0p752"; - regulator-min-microvolt = <752000>; - regulator-max-microvolt = <820000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - reg_l5b_0p752: ldo5 { - regulator-name = "reg_l5b_0p752"; - regulator-min-microvolt = <552000>; - regulator-max-microvolt = <832000>; + regulator-max-microvolt = <650000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { regulator-name = "vreg_l6b_1p2"; - regulator-min-microvolt = <1140000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -436,7 +414,7 @@ vreg_l11b_1p504: ldo11 { regulator-name = "vreg_l11b_1p504"; - regulator-min-microvolt = <1504000>; + regulator-min-microvolt = <1776000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -457,7 +435,7 @@ vreg_l14b_1p08: ldo14 { regulator-name = "vreg_l14b_1p08"; - regulator-min-microvolt = <1080000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -521,26 +499,8 @@ vreg_s1c_2p19: smps1 { regulator-name = "vreg_s1c_2p19"; - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vreg_s2c_0p752: smps2 { - regulator-name = "vreg_s2c_0p752"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <800000>; - }; - - vreg_s5c_0p752: smps5 { - regulator-name = "vreg_s5c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <1050000>; - }; - - vreg_s7c_0p752: smps7 { - regulator-name = "vreg_s7c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <800000>; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2208000>; }; vreg_s9c_1p084: smps9 { @@ -600,7 +560,7 @@ vreg_l8c_1p62: ldo8 { regulator-name = "vreg_l8c_1p62"; - regulator-min-microvolt = <1620000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -608,7 +568,7 @@ vreg_l9c_2p96: ldo9 { regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <35440000>; + regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -628,7 +588,7 @@ vreg_l12c_1p65: ldo12 { regulator-name = "vreg_l12c_1p65"; - regulator-min-microvolt = <1650000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -1009,10 +969,12 @@ }; &qupv3_id_0 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index cabb3f508704..9bcb869dd270 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. QCS8300 Ride"; compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 67ba508e92ba..1b9ca957a94b 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> -#include "qcm2290.dtsi" +#include "agatti.dtsi" #include "pm4125.dtsi" / { @@ -188,6 +188,53 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "qcom,qrb2210-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB1-WSA8815-Speaker-DMIC0"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-i2s-dai-link { + link-name = "HDMI/I2S Playback"; + + codec { + sound-dai = <<9611_codec 0>; + }; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + }; }; &cpu_pd0 { @@ -214,10 +261,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qcm2290/a702_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; }; &i2c2_gpio { @@ -323,6 +370,14 @@ status = "okay"; }; +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@18 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -649,7 +704,7 @@ &uart3 { /delete-property/ interrupts; interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + <&tlmm 11 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&uart3_default>; pinctrl-1 = <&uart3_sleep>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index bdf2d66e40c6..0cd36c54632f 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -245,10 +245,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qrb4210/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qrb4210/a610_zap.mbn"; }; &i2c2_gpio { diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index d99448a0732d..71b42e76f03d 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -594,11 +594,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; /* LS-I2C0 */ diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 64e59299672c..d28d69162427 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -149,13 +149,6 @@ enable-active-high; regulator-always-on; }; - - reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - }; }; &apps_rsc { @@ -345,11 +338,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sa8295p/a690_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sa8295p/a690_zap.mbn"; }; &gpu_smmu { diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index ad342d8b7508..1514da636269 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -31,7 +31,7 @@ }; reserved-memory { - zap_mem: zap-shader@80840000 { + gpu_mem: zap-shader@80840000 { reg = <0x0 0x80840000 0 0x2000>; no-map; }; @@ -426,11 +426,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&zap_mem>; - firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso index 49a98676ca4d..6e8da59597b6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* Venus can be used in EL2 if booted similarly to ChromeOS devices. */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 19cf419cf531..0bce3eefca2e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -39,6 +39,7 @@ * */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &xbl_mem; /delete-node/ &aop_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 74ab321d3333..b398f69917f0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -41,6 +41,7 @@ * required by the board dts. */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a0df10a97c7f..45b9864e3304 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1474,6 +1474,12 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sc7180-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; @@ -2179,6 +2185,10 @@ interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3332,6 +3342,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ccd39a1baeda..8cac4ce9c851 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,7 +7,7 @@ #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/input/linux-event-codes.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" @@ -573,7 +573,7 @@ }; }; -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +/* PINCTRL - additions to nodes defined in kodiak.dtsi */ &dp_hot_plug_det { bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7d1d5bbbbbd9..469a5d103e3d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -16,7 +16,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* PMICs depend on spmi_bus label and so must come after SoC */ #include "pm7325.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 08d0784d0cbb..d86a31ddede2 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -151,11 +151,6 @@ no-map; }; - gpu_mem: gpu-region@98715000 { - reg = <0x0 0x98715000 0x0 0x2000>; - no-map; - }; - cdsp_mem: cdsp-region@98900000 { reg = <0x0 0x98900000 0x0 0x1400000>; no-map; @@ -355,11 +350,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 93de9fe918eb..aff398390eba 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -14,6 +14,8 @@ #include "sc8180x.dtsi" #include "sc8180x-pmics.dtsi" +/delete-node/ &gpu_mem; + / { model = "Qualcomm SC8180x Primus"; compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; @@ -442,11 +444,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 85c2afcb417d..8319d892c6e4 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -646,6 +646,11 @@ no-map; }; + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + reserved@9d400000 { reg = <0x0 0x9d400000 0x0 0x1000000>; no-map; @@ -2274,6 +2279,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2530,6 +2539,12 @@ status = "disabled"; }; + refgen: regulator@88e7000 { + compatible = "qcom,sc8180x-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3116,6 +3131,8 @@ phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { @@ -3203,6 +3220,8 @@ phys = <&mdss_dsi1_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 490e970c54a2..c53e00cae465 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -225,11 +225,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -509,11 +504,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso index 25d1fa4bc205..cff3735a12dd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts index 0374251d3329..9819454abe13 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts @@ -158,11 +158,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -600,11 +595,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 637430719e6d..d84ca010ab9d 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -83,14 +83,11 @@ pinctrl-names = "default"; pinctrl-0 = <&cam_indicator_en>; - led-camera-indicator { - label = "white:camera-indicator"; + privacy_led: privacy-led { function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_WHITE>; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; default-state = "off"; - /* Reuse as a panic indicator until we get a "camera on" trigger */ panic-indicator; }; }; @@ -283,11 +280,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -685,6 +677,9 @@ pinctrl-names = "default"; pinctrl-0 = <&cam_rgb_default>; + leds = <&privacy_led>; + led-names = "privacy"; + clocks = <&camcc CAMCC_MCLK3_CLK>; orientation = <0>; /* Front facing */ @@ -722,11 +717,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts index aeed3ef152eb..f2b4470d4407 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts @@ -186,11 +186,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -462,11 +457,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts index a40dccd70dfd..00bbeeef6f14 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts @@ -227,11 +227,6 @@ }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -579,11 +574,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 279e5e6beae2..5334adebf278 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -691,6 +691,11 @@ no-map; }; + pil_gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + pil_adsp_mem: adsp-region@86c00000 { reg = <0 0x86c00000 0 0x2000000>; no-map; @@ -967,8 +972,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, - <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -989,8 +994,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, - <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1011,8 +1016,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, - <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1033,8 +1038,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, - <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1069,8 +1074,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, - <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1091,8 +1096,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, - <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1131,8 +1136,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, - <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1153,8 +1158,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, - <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1175,8 +1180,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, - <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1197,8 +1202,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, - <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1241,8 +1246,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, - <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1285,8 +1290,8 @@ <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, - <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1338,7 +1343,7 @@ }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@900000 { compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00900000 0 0x60000>; @@ -1393,8 +1398,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, - <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1415,8 +1420,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1437,8 +1442,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1459,8 +1464,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1481,8 +1486,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1503,8 +1508,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1539,8 +1544,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1561,8 +1566,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1583,8 +1588,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1605,8 +1610,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1627,8 +1632,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1649,8 +1654,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1671,8 +1676,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1693,8 +1698,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1715,8 +1720,8 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1800,8 +1805,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1822,8 +1827,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1844,8 +1849,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1866,8 +1871,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1888,8 +1893,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1910,8 +1915,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1932,8 +1937,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1954,8 +1959,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1976,8 +1981,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1998,8 +2003,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2020,8 +2025,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2042,8 +2047,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2064,8 +2069,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2086,8 +2091,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2108,8 +2113,8 @@ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -3366,6 +3371,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&pil_gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3723,6 +3732,12 @@ status = "disabled"; }; + refgen: regulator@8900000 { + compatible = "qcom,sc8280xp-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x08900000 0x0 0x96>; + }; + usb_1_hsphy: phy@8902000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index d01422844fbf..ed55646ca419 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -404,11 +404,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index c33f3de779f6..b8a8dcbdfbe3 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1124,6 +1124,12 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm670-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + mem_noc: interconnect@1380000 { compatible = "qcom,sdm670-mem-noc"; reg = <0 0x01380000 0 0x27200>; @@ -1376,6 +1382,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1926,6 +1936,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -2000,6 +2012,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 8abf3e909502..ce23f87e0316 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -455,10 +455,10 @@ &gpu { status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 99dafc6716e7..0ee2f4b99fbd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -99,26 +99,15 @@ no-map; }; - /* rmtfs lower guard */ - memory@f0800000 { - reg = <0 0xf0800000 0 0x1000>; - no-map; - }; - - rmtfs_mem: memory@f0801000 { + rmtfs_mem: rmtfs-region@f0800000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf0801000 0 0x200000>; + reg = <0 0xf0800000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; - - /* rmtfs upper guard */ - memory@f0a01000 { - reg = <0 0xf0a01000 0 0x1000>; - no-map; - }; }; gpio-keys { @@ -467,10 +456,6 @@ &gpu { status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - }; }; &ipa { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index a12723310c8b..09bfcef42402 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -47,10 +47,8 @@ firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts index d17d4d4d5609..ffe1da2227f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -33,10 +33,8 @@ firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 63d2993536ad..091568642faa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -416,11 +416,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index dcfffb271fcf..db6dd04c51bb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -76,31 +76,19 @@ reserved-memory { /* - * The rmtfs_mem needs to be guarded due to "XPU limitations" - * it is otherwise possible for an allocation adjacent to the - * rmtfs_mem region to trigger an XPU violation, causing a crash. - */ - rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { - no-map; - reg = <0 0xf5b00000 0 0x1000>; - }; - /* * The rmtfs memory region in downstream is 'dynamically allocated' * but given the same address every time. Hard code it as this address is * where the modem firmware expects it to be. */ - rmtfs_mem: rmtfs-mem@f5b01000 { + rmtfs_mem: rmtfs-region@f5b00000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf5b01000 0 0x200000>; + reg = <0 0xf5b00000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; - rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { - no-map; - reg = <0 0xf5d01000 0 0x1000>; - }; /* * It seems like reserving the old rmtfs_mem region is also needed to prevent @@ -162,6 +150,34 @@ enable-active-high; regulator-boot-on; }; + + panel_vci_3v3: panel-vci-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LCD_VCI_3V"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_vci_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; + + panel_vddi_poc_1p8: panel-vddi-poc-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDDI_POC"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_poc_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; }; &adsp_pas { @@ -351,11 +367,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; }; &i2c10 { @@ -429,11 +444,15 @@ reg = <0>; vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&panel_vci_3v3>; + poc-supply = <&panel_vddi_poc_1p8>; + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + pinctrl-0 = <&panel_default>; + pinctrl-1 = <&panel_sleep>; + pinctrl-names = "default", "sleep"; port { panel_in: endpoint { @@ -803,39 +822,78 @@ bias-disable; }; - tri_state_key_default: tri-state-key-default-state { - pins = "gpio40", "gpio42", "gpio26"; + panel_vci_default: vci-state { + pins = "gpio26"; function = "gpio"; - drive-strength = <2>; + drive-strength = <8>; bias-disable; }; - ts_default_pins: ts-int-state { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; - - panel_reset_pins: panel-reset-state { - pins = "gpio6", "gpio25", "gpio26"; + panel_poc_default: poc-state { + pins = "gpio25"; function = "gpio"; drive-strength = <8>; bias-disable; }; - panel_te_pin: panel-te-state { - pins = "gpio10"; - function = "mdp_vsync"; + alert_slider_default: alert-slider-default-state { + pins = "gpio126", "gpio52", "gpio24"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - panel_esd_pin: panel-esd-state { - pins = "gpio30"; + panel_default: panel-default-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + panel_sleep: panel-sleep-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; function = "gpio"; - drive-strength = <2>; - bias-pull-down; + drive-strength = <16>; + bias-pull-up; }; speaker_default: speaker-default-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 7e75decfda05..d6cd873aef0d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -32,7 +32,7 @@ &display_panel { status = "okay"; - compatible = "samsung,s6e3fc2x01"; + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 75a53f0bbebd..5d41a92cfebf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -158,7 +158,7 @@ }; }; - i2c21 { + i2c-21 { compatible = "i2c-gpio"; sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -251,11 +251,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; }; &mdss { @@ -599,15 +598,15 @@ &i2c14 { status = "okay"; - pmic@66 { + max77705: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&pmic_int_default>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; leds { compatible = "maxim,max77705-rgb"; @@ -646,8 +645,8 @@ reg = <0x69>; compatible = "maxim,max77705-charger"; monitored-battery = <&battery>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <0>; }; fuel-gauge@36 { @@ -655,8 +654,8 @@ compatible = "maxim,max77705-battery"; power-supplies = <&max77705_charger>; maxim,rsns-microohm = <5000>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 89260fce6513..ddc2b3ca3bc5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -423,31 +423,29 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; }; &i2c5 { status = "okay"; touchscreen@38 { - compatible = "focaltech,fts8719"; + compatible = "focaltech,ft5452"; reg = <0x38>; - wakeup-source; - interrupt-parent = <&tlmm>; - interrupts = <125 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vreg_l28a_3p0>; - vcc-i2c-supply = <&vreg_l14a_1p88>; - pinctrl-names = "default", "suspend"; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l28a_3p0>; + iovcc-supply = <&vreg_l14a_1p88>; + pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + pinctrl-names = "default", "suspend"; - reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; - irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; touchscreen-size-x = <1080>; touchscreen-size-y = <2160>; }; @@ -479,9 +477,6 @@ vdda-supply = <&vreg_l14a_1p88>; vdd3p3-supply = <&vreg_l28a_3p0>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index f3f4c0900572..7dc9349eedfd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -426,11 +426,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 7480c8d7ac5b..785006a15e97 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -246,11 +246,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1c50a0563bc4..30e88ff010a3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -392,11 +392,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 13c9515260ef..bf2f9c04adba 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2218,6 +2218,11 @@ }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, @@ -4750,6 +4755,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4824,6 +4831,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4893,6 +4902,10 @@ status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts new file mode 100644 index 000000000000..0ef9ea38a424 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -0,0 +1,971 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Huawei MateBook E 2019 + * + * Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com> + */ + +/dts-v1/; + +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd934x.h> +#include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; + +/ { + model = "Huawei MateBook E 2019"; + compatible = "huawei,planck", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + wakeup-source; + }; + + switch-mode { + label = "Tablet mode switch"; + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_TABLET_MODE>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led: led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + sw_edp_1p2: regulator-edp-1p2 { + compatible = "regulator-fixed"; + regulator-name = "sw_edp_1p2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + pinctrl-0 = <&sw_edp_1p2_en>; + pinctrl-names = "default"; + + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_l2a_1p2>; + }; + + vlcm_3v3: regulator-vlcm-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vlcm_3v3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + }; + + reserved-memory { + cont_splash_mem: framebuffer@80100000 { + reg = <0 0x80100000 0 0xd00000>; + no-map; + }; + + tz_mem: tz@86d00000 { + reg = <0 0x86d00000 0 0x4600000>; + no-map; + }; + + qseecom_mem: qseecom@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1200000>; + }; + + gpu_mem: gpu@97900000 { + reg = <0 0x97900000 0 0x5000>; + no-map; + }; + + rmtfs_mem: rmtfs@97c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x97c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn"; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p8: smps6 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <1028000>; + regulator-max-microvolt = <1028000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + regulator-always-on; + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + /* 3075000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + /* 3300000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + }; + }; +}; + +&cci_i2c0 { + /* chipnext,cn3927e vcm@0xc */ + /* samsung,s5k3l6 camera@0x10 */ + /* eeprom@0x50 */ +}; + +&cci_i2c1 { + /* galaxycore,gc5025 camera@0x36 */ + /* eeprom@0x50 */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn"; + + status = "okay"; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disabled"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_LPASS_Q6_AXI_CLK>, + <GCC_LPASS_SWAY_CLK>; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen: hid@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&i2c5_hid_active>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c7 { + /* ec@0x76 */ +}; + +&i2c10 { + clock-frequency = <400000>; + + status = "okay"; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + pinctrl-0 = <&sn65dsi86_pin_active>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vcca-supply = <&sw_edp_1p2>; + vcc-supply = <&sw_edp_1p2>; + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&vlcm_3v3>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf"; + + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn", + "qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn"; + + status = "okay"; +}; + +&pm8998_gpios { + sw_edp_1p2_en: sw-edp-1p2-en-state { + pins = "gpio9"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + volume_up_gpio: volume-up-gpio-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pwrkey { + status = "okay"; +}; + +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + + dai@1 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + + dai@2 { + reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-names = "default"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&slpi_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn"; + + status = "okay"; +}; + +&sound { + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; + model = "HUAWEI-PAK_AL09-M1040"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "DMIC0", "MCLK", + "DMIC0", "MIC BIAS1", + "DMIC2", "MCLK", + "DMIC2", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + + codec { + sound-dai = <&wcd9340 AIF1_CAP>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + + codec { + sound-dai = <&wcd9340 AIF2_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, /* Unused */ + <81 4>; /* SPI (fingerprint reader) */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_hid_active: i2c5-hid-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio79"; + function = "gpio"; + bias-disable; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + + sn65dsi86_pin_active: sn65dsi86-enable-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; + + status = "okay"; +}; + +&usb_2_qmpphy { + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn"; + + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + + swm: soundwire@c85 { + left_spkr: speaker@0,3 { + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,4 { + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,calibration-variant = "Huawei_Planck"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 90efbb7e3799..e41200839dbe 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -356,11 +356,10 @@ }; &gpu { - status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; - }; + status = "okay";}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index 06cacec3461f..6696e1aee243 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -337,11 +337,9 @@ }; &usb { - status = "okay"; -}; - -&usb_dwc3 { dr_mode = "peripheral"; + + status = "okay"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index 75bfc19f412c..eff4c9055d66 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -1019,12 +1019,9 @@ }; }; - usb: usb@a6f8800 { - compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a6f8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb: usb@a600000 { + compatible = "qcom,sdx75-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -1041,21 +1038,35 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + iommus = <&apps_smmu 0x80 0x0>; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + power-domains = <&gcc GCC_USB30_GDSC>; resets = <&gcc GCC_USB30_BCR>; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1063,38 +1074,25 @@ interconnect-names = "usb-ddr", "apps-usb"; + usb-role-switch; + status = "disabled"; - usb_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a600000 0x0 0xcd00>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&apps_smmu 0x80 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - phys = <&usb_hsphy>, - <&usb_qmpphy>; - phy-names = "usb2-phy", - "usb3-phy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_1_dwc3_hs: endpoint { - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_dwc3_ss: endpoint { - }; + usb_1_dwc3_ss: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index ad347ccd1975..466ad409e924 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -121,10 +121,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 91fc36b59abf..5e2032c26ea3 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1745,7 +1745,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index c17545111f49..be1f550fd7b5 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -67,10 +67,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8459b27cacc7..f34dc6e278b8 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1175,18 +1175,47 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { @@ -1768,6 +1797,12 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm6350-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm6350-qmp-usb3-dp-phy"; reg = <0x0 0x088e8000 0x0 0x3000>; @@ -2158,6 +2193,8 @@ power-domains = <&dispcc MDSS_GDSC>; iommus = <&apps_smmu 0x800 0x2>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + #address-cells = <2>; #size-cells = <2>; ranges; @@ -2360,6 +2397,8 @@ phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 0faa3a40ff82..87d6600ccbd9 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -971,6 +971,12 @@ status = "disabled"; }; + refgen: regulator@162f000 { + compatible = "qcom,sm6375-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0162f000 0x0 0x84>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x01c40000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts index f16b47b6a74c..cb59c122f6f6 100644 --- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts +++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts @@ -978,6 +978,11 @@ status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7325.dtsi b/arch/arm64/boot/dts/qcom/sm7325.dtsi index 85d34b53e5e9..beb279956df6 100644 --- a/arch/arm64/boot/dts/qcom/sm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7325.dtsi @@ -4,7 +4,7 @@ * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com> */ -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* SM7325 uses Kryo 670 */ &cpu0 { compatible = "qcom,kryo670"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index acdba79612aa..e3ec99972a28 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2255,7 +2255,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3469,6 +3469,12 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8150-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8150-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3992,6 +3998,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4085,6 +4093,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7f592bd30248..51779b99176d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -484,11 +484,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi index cf3d917addd8..ef7ea4f72bf9 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi @@ -159,7 +159,8 @@ }; &tlmm { - gpio-reserved-ranges = <40 4>; /* I2C (Unused) */ + gpio-reserved-ranges = <20 4>, /* SPI (fingerprint scanner) */ + <40 4>; /* Unused */ }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 465fd6e954a3..c017399297b9 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -554,11 +554,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts index 4ad24974c09f..078ba13f8762 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts @@ -424,11 +424,10 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; }; &i2c11 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 50dd11432bb2..c7dffa440074 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2944,7 +2944,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3901,6 +3901,11 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -4679,6 +4684,8 @@ iommus = <&apps_smmu 0x820 0x402>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + status = "disabled"; #address-cells = <2>; @@ -4873,6 +4880,8 @@ phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4967,6 +4976,8 @@ phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 24a8c91e9f70..5f975d009465 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -403,10 +403,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8350/a660_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8350/a660_zap.mbn"; }; &i2c13 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index fc4ce9d4977e..5c8fe213f5e4 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2051,7 +2051,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 0c6aa7ddf432..268ae0cd642a 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -643,10 +643,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8450/a730_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8450/a730_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 23420e692472..920a2d1c04d0 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2047,25 +2047,28 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ + /* 2.5 GT/s x1 */ opp-2500000 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 2 x1 */ + /* 5 GT/s x1 */ opp-5000000 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ + /* 8 GT/s x1 */ opp-8000000 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; }; @@ -2209,46 +2212,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2434,7 +2459,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso new file mode 100644 index 000000000000..66bec0fef766 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SM8550-HDK Rear Camera Card overlay + * + * Copyright (c) 2025, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,sm8550-camcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/dts-v1/; +/plugin/; + +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index b5d7f0cd443a..599850c48494 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -955,10 +955,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 38f2928f23cc..f430038bd402 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -642,10 +642,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &i2c_master_hub_0 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index a3f4200a1145..05c98fe2c25b 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -716,6 +716,52 @@ }; }; +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + port@3 { + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + &i2c_master_hub_0 { status = "okay"; }; @@ -789,10 +835,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 7724dba75db7..2ca9e50ef599 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2027,39 +2027,52 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -2194,46 +2207,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2456,7 +2491,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; @@ -3189,6 +3224,7 @@ &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; bus-width = <4>; + max-sd-hs-hz = <37500000>; dma-coherent; /* Forbid SDR104/SDR50 - broken hw! */ @@ -4277,6 +4313,150 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam0_sleep: cam0-sleep-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam1_sleep: cam1-sleep-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam2_default: cam2-default-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam2_sleep: cam2-sleep-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam3_default: cam3-default-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam3_sleep: cam3-sleep-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam4_default: cam4-default-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam4_sleep: cam4-sleep-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam5_default: cam5-default-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam5_sleep: cam5-sleep-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam6_default: cam6-default-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam6_sleep: cam6-sleep-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam7_default: cam7-default-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam7_sleep: cam7-sleep-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + cci0_0_default: cci0-0-default-state { sda-pins { pins = "gpio110"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index 87d7190dc991..5bf1af3308ce 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -900,10 +900,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 9e790cf44804..b2feac61a89f 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -830,10 +830,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index ebf1971b1bfb..07ae74851621 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -3659,39 +3659,52 @@ pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -3839,46 +3852,68 @@ pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -3988,6 +4023,8 @@ iommus = <&apps_smmu 0x60 0>; + dma-coherent; + lanes-per-direction = <2>; qcom,ice = <&ice>; @@ -4121,7 +4158,7 @@ status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index 3bbb53b7c71f..c8cb521b4c26 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -191,6 +191,51 @@ }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -960,9 +1005,6 @@ }; &pcie0 { - wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -977,6 +1019,9 @@ }; &pcieport0 { + wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -1200,3 +1245,31 @@ status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index 13c7b9664c89..b0cb61c5a603 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -193,6 +193,51 @@ }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -1054,3 +1099,31 @@ status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index a82d9867c7cb..3f0b57f428bb 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> @@ -635,7 +636,7 @@ <0>, <0>, <0>, - <0>; + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -2581,6 +2582,164 @@ }; }; + usb_hsphy: phy@88e3000 { + compatible = "qcom,sm8750-m31-eusb2-phy"; + reg = <0x0 0x88e3000 0x0 0x29c>; + + clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8750-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsrcc TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb: usb@a600000 { + compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x40 0x0>; + + phys = <&usb_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index 3d2a1cb02b62..d1dbfa3bd81c 100644 --- a/arch/arm64/boot/dts/qcom/sm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -3,6 +3,7 @@ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,qcs615-camcc.h> #include <dt-bindings/clock/qcom,qcs615-dispcc.h> #include <dt-bindings/clock/qcom,qcs615-gcc.h> @@ -11,6 +12,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +41,10 @@ clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_0: l2-cache { compatible = "cache"; @@ -60,6 +66,10 @@ next-level-cache = <&l2_100>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_100: l2-cache { compatible = "cache"; @@ -81,6 +91,10 @@ next-level-cache = <&l2_200>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_200: l2-cache { compatible = "cache"; @@ -102,6 +116,10 @@ next-level-cache = <&l2_300>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_300: l2-cache { compatible = "cache"; @@ -123,6 +141,10 @@ next-level-cache = <&l2_400>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_400: l2-cache { compatible = "cache"; @@ -144,6 +166,10 @@ next-level-cache = <&l2_500>; clocks = <&cpufreq_hw 0>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_500: l2-cache { compatible = "cache"; @@ -166,6 +192,10 @@ clocks = <&cpufreq_hw 1>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_600: l2-cache { compatible = "cache"; @@ -187,6 +217,10 @@ next-level-cache = <&l2_700>; clocks = <&cpufreq_hw 1>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; l2_700: l2-cache { compatible = "cache"; @@ -239,6 +273,111 @@ }; }; + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 4) (300000 * 16)>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <(451000 * 4) (806400 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(547000 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-peak-kBps = <(1017000 * 4) (1363200 * 16)>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(451000 * 4) (300000 * 16)>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <109440000>; + opp-peak-kBps = <(1017600 * 4) (940800 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1017600 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + }; + dummy_eud: dummy-sink { compatible = "arm,coresight-dummy-sink"; @@ -3657,14 +3796,191 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm6150-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_CORE_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupts-extended = <&mdss 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0 0x0ae94400 0x0 0x100>, + <0x0 0x0ae94500 0x0 0x300>, + <0x0 0x0ae94800 0x0 0x124>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,qcs615-dispcc"; reg = <0 0x0af00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, - <0>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, <0>, <0>; @@ -3978,6 +4294,16 @@ }; }; + osm_l3: interconnect@18321000 { + compatible = "qcom,qcs615-osm-l3", "qcom,sm8150-osm-l3", "qcom,osm-l3"; + reg = <0x0 0x18321000 0x0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,qcs615-qusb2-phy"; reg = <0x0 0x88e2000 0x0 0x180>; diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi index ee3c8c5e2c50..8e5c5575a532 100644 --- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -11,10 +11,9 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { - model = "ASUS Zenbook A14"; chassis-type = "laptop"; aliases { @@ -1005,14 +1004,10 @@ status = "okay"; aux-bus { - panel { + panel: panel { compatible = "edp-panel"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - port { edp_panel_in: endpoint { remote-endpoint = <&mdss_dp3_out>; diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 3c9455fede5c..ded96fb43489 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 CRD"; @@ -82,6 +82,13 @@ <&tlmm 123 GPIO_ACTIVE_HIGH>, <&tlmm 125 GPIO_ACTIVE_HIGH>; + nvmem-cells = <&charge_limit_en>, + <&charge_limit_end>, + <&charge_limit_delta>; + nvmem-cell-names = "charge_limit_en", + "charge_limit_end", + "charge_limit_delta"; + /* Left-side rear port */ connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi index cc64558ed5e6..bf04a12b16bc 100644 --- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi @@ -12,7 +12,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { chassis-type = "laptop"; @@ -1023,7 +1023,6 @@ }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1032,13 +1031,15 @@ }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { /delete-property/ #sound-dai-cells; + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + status = "okay"; aux-bus { diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index bfc649d4b643..a9643cd746d5 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows"; @@ -763,10 +763,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 654cbce9d6ec..80ece9db875a 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -12,8 +12,8 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo ThinkPad T14s Gen 6"; @@ -722,10 +722,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 0113d856b3ad..d4df21de0d95 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -11,8 +11,8 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "ASUS Vivobook S 15"; @@ -479,10 +479,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts index 0d0bcc50207d..0408ade7150f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -6,12 +6,71 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407RA)"; compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &gpu { @@ -22,6 +81,31 @@ firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + }; +}; + +&panel { + compatible = "samsung,atna40cu11", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; +}; + &remoteproc_adsp { firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; @@ -35,3 +119,21 @@ status = "okay"; }; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index dfc378e1a056..429deffcf3e9 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -5,7 +5,7 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-crd.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts index cf2a7c262888..75e10d97c386 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts index 32ad9679550e..a8ff7ef258a1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 58f8caaa7258..2f533e56c8c8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -12,8 +12,8 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Dell XPS 13 9345"; @@ -676,10 +676,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts index 4ea00d823693..0b3b6cb23e1a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -9,10 +9,8 @@ compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; }; -&gpu { - zap-shader { - firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; }; &remoteproc_adsp { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index e5a839d45840..b79e59e1c413 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -6,8 +6,8 @@ /dts-v1/; -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include "x1-hp-omnibook-x14.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index e0642fe8343f..4c31d14a07bc 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -9,8 +9,8 @@ #include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo Yoga Slim 7x"; @@ -799,10 +799,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index ed468b93ba50..7e1e808ea983 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -9,8 +9,8 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { aliases { @@ -861,11 +861,11 @@ &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_microcode_mem>; - firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 4a9b6d791e7f..b742aabd9c04 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -8,8 +8,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 QCP"; @@ -831,10 +831,10 @@ &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts new file mode 100644 index 000000000000..be756069131d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14-lcd.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com> + */ + +/dts-v1/; + +#include "x1p42100-asus-zenbook-a14.dtsi" + +/ { + model = "ASUS Zenbook A14 (UX3407QA, LCD)"; + compatible = "asus,zenbook-a14-ux3407qa-lcd", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 416667>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_bl_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; +}; + +&panel { + backlight = <&backlight>; +}; + +&pmc8380_3_gpios { + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; +}; + +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts index bd75ff898601..68cd318d6907 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts @@ -6,136 +6,17 @@ /dts-v1/; -#include "x1p42100.dtsi" -#include "x1-asus-zenbook-a14.dtsi" - -/delete-node/ &pmc8380_6; -/delete-node/ &pmc8380_6_thermal; +#include "x1p42100-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407QA)"; - compatible = "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; - - wcn6855-pmu { - compatible = "qcom,wcn6855-pmu"; - - vddaon-supply = <&vreg_wcn_0p95>; - vddio-supply = <&vreg_wcn_1p9>; - vddpcie1p3-supply = <&vreg_wcn_1p9>; - vddpcie1p9-supply = <&vreg_wcn_1p9>; - vddpmu-supply = <&vreg_wcn_0p95>; - vddpmucx-supply = <&vreg_wcn_0p95>; - vddpmumx-supply = <&vreg_wcn_0p95>; - vddrfa0p95-supply = <&vreg_wcn_0p95>; - vddrfa1p3-supply = <&vreg_wcn_1p9>; - vddrfa1p9-supply = <&vreg_wcn_1p9>; - - bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; - wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; - pinctrl-names = "default"; - - regulators { - vreg_pmu_rfa_cmn_0p8: ldo0 { - regulator-name = "vreg_pmu_rfa_cmn_0p8"; - }; - - vreg_pmu_aon_0p8: ldo1 { - regulator-name = "vreg_pmu_aon_0p8"; - }; - - vreg_pmu_wlcx_0p8: ldo2 { - regulator-name = "vreg_pmu_wlcx_0p8"; - }; - - vreg_pmu_wlmx_0p8: ldo3 { - regulator-name = "vreg_pmu_wlmx_0p8"; - }; - - vreg_pmu_btcmx_0p8: ldo4 { - regulator-name = "vreg_pmu_btcmx_0p8"; - }; - - vreg_pmu_pcie_1p8: ldo5 { - regulator-name = "vreg_pmu_pcie_1p8"; - }; - - vreg_pmu_pcie_0p9: ldo6 { - regulator-name = "vreg_pmu_pcie_0p9"; - }; - - vreg_pmu_rfa_0p8: ldo7 { - regulator-name = "vreg_pmu_rfa_0p8"; - }; - - vreg_pmu_rfa_1p2: ldo8 { - regulator-name = "vreg_pmu_rfa_1p2"; - }; - - vreg_pmu_rfa_1p7: ldo9 { - regulator-name = "vreg_pmu_rfa_1p7"; - }; - }; - }; + compatible = "asus,zenbook-a14-ux3407qa-oled", "asus,zenbook-a14-ux3407qa", "qcom,x1p42100"; }; -&gpu { - status = "okay"; -}; - -&gpu_zap_shader { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; -}; - -&pcie4_port0 { - wifi@0 { - compatible = "pci17cb,1103"; - reg = <0x10000 0x0 0x0 0x0 0x0>; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; - vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; - - qcom,calibration-variant = "UX3407Q"; - }; -}; - -&remoteproc_adsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; - - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", - "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; - - status = "okay"; -}; - -&uart14 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn6855-bt"; - - vddaon-supply = <&vreg_pmu_aon_0p8>; - vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; - vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; - vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; - vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; - vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; - vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; +&panel { + compatible = "samsung,atna40ct06", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; - max-speed = <3000000>; - }; + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; }; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi new file mode 100644 index 000000000000..22470a97e1e3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Aleksandrs Vinarskis <alex@vinarskis.com> + */ + +/dts-v1/; + +#include "purwa.dtsi" +#include "x1-asus-zenbook-a14.dtsi" + +/delete-node/ &pmc8380_6; +/delete-node/ &pmc8380_6_thermal; + +/ { + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + vddaon-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_wcn_1p9>; + vddpcie1p3-supply = <&vreg_wcn_1p9>; + vddpcie1p9-supply = <&vreg_wcn_1p9>; + vddpmu-supply = <&vreg_wcn_0p95>; + vddpmucx-supply = <&vreg_wcn_0p95>; + vddpmumx-supply = <&vreg_wcn_0p95>; + vddrfa0p95-supply = <&vreg_wcn_0p95>; + vddrfa1p3-supply = <&vreg_wcn_1p9>; + vddrfa1p9-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcdxkmsucpurwa.mbn"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + qcom,calibration-variant = "UX3407Q"; + }; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1p42100/ASUSTeK/zenbook-a14/qccdsp8380.mbn", + "qcom/x1p42100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts index cf999c2cf8d4..7ed4116b9590 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts @@ -5,7 +5,7 @@ /dts-v1/; -#include "x1p42100.dtsi" +#include "purwa.dtsi" #include "x1-crd.dtsi" /delete-node/ &pmc8380_6; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts index 6696cab2de3e..0f338e457abd 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts @@ -2,8 +2,8 @@ /dts-v1/; -#include "x1p42100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "purwa.dtsi" +#include "hamoa-pmics.dtsi" #include "x1-hp-omnibook-x14.dtsi" /delete-node/ &pmc8380_6; /delete-node/ &pmc8380_6_thermal; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts index 1ac46cdc4386..3186e79e862d 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts @@ -13,8 +13,8 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -#include "x1p42100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "purwa.dtsi" +#include "hamoa-pmics.dtsi" /delete-node/ &pmc8380_6; /delete-node/ &pmc8380_6_thermal; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index ccdf7aaeca13..1fab1b50f20e 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -108,9 +108,18 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo r8a779g3-sparrow-hawk-camera-j2-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-argon40.dtbo +r8a779g3-sparrow-hawk-fan-argon40-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-argon40.dtbo +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-argon40.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo +r8a779g3-sparrow-hawk-rpi-display-2-5in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-5in.dtbo +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-5in.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo +r8a779g3-sparrow-hawk-rpi-display-2-7in-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-rpi-display-2-7in.dtbo +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-rpi-display-2-7in.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-white-hawk-single.dtb r8a779g3-white-hawk-single-ard-audio-da7212-dtbs := r8a779g3-white-hawk-single.dtb white-hawk-ard-audio-da7212.dtbo @@ -136,6 +145,8 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb r8a779m5-salvator-xs-panel-aa104xd12-dtbs := r8a779m5-salvator-xs.dtb salvator-panel-aa104xd12.dtbo dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb +dtb-$(CONFIG_ARCH_R8A78000) += r8a78000-ironhide.dtb + dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-du-adv7513.dtbo diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi index 7cb5c958aece..529388f6bf2b 100644 --- a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi +++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi @@ -66,7 +66,6 @@ compatible = "ovti,ov5645"; reg = <0x3c>; clocks = <&osc25250_clk>; - clock-frequency = <24000000>; vdddo-supply = <&ov5645_vdddo_1v8>; vdda-supply = <&ov5645_vdda_2v8>; vddd-supply = <&ov5645_vddd_1v5>; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index 71d9f277c966..733a55f77cfb 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -722,6 +722,11 @@ shared-pin; }; +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index c4c86344fb90..adc4449b809a 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -858,6 +858,11 @@ shared-pin; }; +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 6b737d91b320..f0729a482cef 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -14,6 +14,7 @@ compatible = "renesas,r8a774a1"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -235,17 +236,17 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts= <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>; }; @@ -263,7 +264,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -2863,10 +2863,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 3f15d656215e..c9857ea944ed 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -14,6 +14,7 @@ compatible = "renesas,r8a774b1"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -128,8 +129,8 @@ pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>; }; @@ -147,7 +148,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -2734,10 +2734,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 55df063cb323..3858f4328e96 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a774c0"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -119,8 +120,8 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts= <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>; }; @@ -138,7 +139,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -2000,10 +2000,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 5d730b488d46..52920a6bf592 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -14,6 +14,7 @@ compatible = "renesas,r8a774e1"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -297,19 +298,19 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>; }; @@ -327,7 +328,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -2997,10 +2997,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index c389ebc7e6ce..9ad700bde4ba 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -18,6 +18,7 @@ compatible = "renesas,r8a7795"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -312,10 +313,10 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, @@ -324,10 +325,10 @@ pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, @@ -348,7 +349,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -365,6 +365,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7795_CLK_OSC>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7795", "renesas,rcar-gen3-gpio"; @@ -3476,10 +3486,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 6d039019905d..e03b1f7cbfd6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a7796"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -284,17 +285,17 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>; }; @@ -312,7 +313,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -330,6 +330,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7796_CLK_OSC>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7796", "renesas,rcar-gen3-gpio"; @@ -2565,6 +2575,23 @@ resets = <&cpg 408>; }; + gpu: gpu@fd000000 { + compatible = "renesas,r8a7796-gpu", + "img,img-gx6250", + "img,img-rogue"; + reg = <0 0xfd000000 0 0x40000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A7796_CLK_ZG>, + <&cpg CPG_CORE R8A7796_CLK_S2D1>, + <&cpg CPG_MOD 112>; + clock-names = "core", "mem", "sys"; + power-domains = <&sysc R8A7796_PD_3DG_A>, + <&sysc R8A7796_PD_3DG_B>; + power-domain-names = "a", "b"; + resets = <&cpg 112>; + status = "disabled"; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a7796", "renesas,pcie-rcar-gen3"; @@ -3074,10 +3101,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 1637b534fc68..31b11bdab69b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a77961"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -284,17 +285,17 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>; }; @@ -312,7 +313,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -330,6 +330,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a77961-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77961_CLK_OSC>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77961", "renesas,rcar-gen3-gpio"; @@ -2445,6 +2455,23 @@ resets = <&cpg 408>; }; + gpu: gpu@fd000000 { + compatible = "renesas,r8a77961-gpu", + "img,img-gx6250", + "img,img-rogue"; + reg = <0 0xfd000000 0 0x40000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77961_CLK_ZG>, + <&cpg CPG_CORE R8A77961_CLK_S2D1>, + <&cpg CPG_MOD 112>; + clock-names = "core", "mem", "sys"; + power-domains = <&sysc R8A77961_PD_3DG_A>, + <&sysc R8A77961_PD_3DG_B>; + power-domain-names = "a", "b"; + resets = <&cpg 112>; + status = "disabled"; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a77961", "renesas,pcie-rcar-gen3"; @@ -2895,10 +2922,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 353a77187089..4e730144e5fd 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -18,6 +18,7 @@ compatible = "renesas,r8a77965"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -163,8 +164,8 @@ pmu_a57 { compatible = "arm,cortex-a57-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a57_0>, <&a57_1>; }; @@ -183,7 +184,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -201,6 +201,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a77965-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77965_CLK_OSC>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77965", "renesas,rcar-gen3-gpio"; @@ -2440,6 +2450,23 @@ resets = <&cpg 408>; }; + gpu: gpu@fd000000 { + compatible = "renesas,r8a77965-gpu", + "img,img-ge7800", + "img,img-rogue"; + reg = <0 0xfd000000 0 0x40000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77965_CLK_ZG>, + <&cpg CPG_CORE R8A77965_CLK_S2D1>, + <&cpg CPG_MOD 112>; + clock-names = "core", "mem", "sys"; + power-domains = <&sysc R8A77965_PD_3DG_A>, + <&sysc R8A77965_PD_3DG_B>; + power-domain-names = "a", "b"; + resets = <&cpg 112>; + status = "disabled"; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a77965", "renesas,pcie-rcar-gen3"; @@ -2903,10 +2930,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso index 0c005660d8dd..ecb35257b9ae 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso @@ -170,7 +170,24 @@ }; }; +&mmc0 { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&d3p3>; + vqmmc-supply = <&d1p8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &pfc { + mmc_pins: mmc { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + vin0_pins_parallel: vin0 { groups = "vin0_data12", "vin0_sync", "vin0_clk", "vin0_clkenb"; function = "vin0"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 8b594e9e9dc1..b7328f9f7d4b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -417,3 +417,8 @@ &scif_clk { clock-frequency = <14745600>; }; + +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 445f5dd7c983..f18d26360610 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -146,7 +146,6 @@ hdmi@39 { compatible = "adi,adv7511w"; - #sound-dai-cells = <0>; reg = <0x39>; interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <&vcc_d1_8v>; @@ -293,6 +292,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; @@ -300,3 +304,8 @@ status = "okay"; }; + +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index e7a5800bf742..1007ee48adc3 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -15,6 +15,7 @@ compatible = "renesas,r8a77970"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { @@ -73,8 +74,8 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>; }; @@ -92,7 +93,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -110,6 +110,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77970_CLK_OSC>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77970", "renesas,rcar-gen3-gpio"; @@ -1227,10 +1237,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index c2692d6fd00d..2da63b4daa0a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -138,7 +138,6 @@ hdmi@39 { compatible = "adi,adv7511w"; - #sound-dai-cells = <0>; reg = <0x39>; interrupts-extended = <&gpio1 20 IRQ_TYPE_LEVEL_LOW>; avdd-supply = <&vcc1v8_d4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 964aa14f3e65..8cd7f68d026b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -15,6 +15,7 @@ compatible = "renesas,r8a77980"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { @@ -100,10 +101,10 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; }; @@ -121,7 +122,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -1631,14 +1631,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | - IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index e16ede6eb379..d3698f7e494d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a77990"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -134,8 +135,8 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&a53_0>, <&a53_1>; }; @@ -153,7 +154,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -171,6 +171,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a77990-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77990_CLK_OSC>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77990", "renesas,rcar-gen3-gpio"; @@ -2164,10 +2174,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index b66cd7c90d53..5f3fcef7560c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -14,6 +14,7 @@ compatible = "renesas,r8a77995"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -70,7 +71,7 @@ pmu_a53 { compatible = "arm,cortex-a53-pmu"; - interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; }; psci { @@ -86,7 +87,6 @@ soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -104,6 +104,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A77995_CLK_OSC>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 401>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a77995", "renesas,rcar-gen3-gpio"; @@ -1479,10 +1489,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 2c3fb34abb28..4b101a6dc49d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a779a0"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { @@ -60,7 +61,7 @@ pmu_a76 { compatible = "arm,cortex-a76-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; /* External SCIF clock - to be overridden by boards that provide it */ @@ -72,7 +73,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -90,6 +90,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a779a0-wdt", "renesas,rcar-gen4-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_OSC>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 1128>; + status = "disabled"; + }; + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a779a0"; reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, @@ -2327,6 +2337,23 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + gpu: gpu@fd000000 { + compatible = "renesas,r8a779a0-gpu", + "img,img-ge7800", + "img,img-rogue"; + reg = <0 0xfd000000 0 0x40000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779A0_CLK_ZG>, + <&cpg CPG_CORE R8A779A0_CLK_S3D1>, + <&cpg CPG_MOD 0>; + clock-names = "core", "mem", "sys"; + power-domains = <&sysc R8A779A0_PD_3DG_A>, + <&sysc R8A779A0_PD_3DG_B>; + power-domain-names = "a", "b"; + resets = <&cpg 0>; + status = "disabled"; + }; + fcpvd0: fcp@fea10000 { compatible = "renesas,fcpv"; reg = <0 0xfea10000 0 0x200>; @@ -3086,11 +3113,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index b496495c59a6..0ebf8e5dd2f9 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a779f0"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; cluster01_opp: opp-table-0 { compatible = "operating-points-v2"; @@ -280,7 +281,7 @@ pmu_a55 { compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -297,7 +298,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -315,6 +315,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a779f0-wdt", "renesas,rcar-gen4-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779F0_CLK_OSC>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1128>; + status = "disabled"; + }; + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a779f0"; reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, @@ -1340,11 +1350,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 4fae063bf91b..ff2bd1908a45 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a779g0"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* External Audio clock - to be overridden by boards that provide it */ audio_clkin: audio_clkin { @@ -193,7 +194,7 @@ pmu_a76 { compatible = "arm,cortex-a76-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -216,7 +217,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -234,6 +234,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a779g0-wdt", "renesas,rcar-gen4-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779G0_CLK_OSC>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 1128>; + status = "disabled"; + }; + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a779g0"; reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, @@ -2601,11 +2611,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso new file mode 100644 index 000000000000..c730ef39c7d7 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-argon40.dtso @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Overlay for the Argon40 HAT blower fan on connector CN7 + * on R-Car V4H ES3.0 Sparrow Hawk board + * + * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org> + * + * Example usage: + * + * # Localize hwmon sysfs directory that matches the PWM fan, + * # enable the PWM fan, and configure the fan speed manually. + * r8a779g3-sparrow-hawk$ ls -1 /sys/devices/platform/pwm-fan-ext/hwmon/hwmon?/pwm?_enable + * /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1_enable + * + * # Select mode 2 , enable fan PWM and regulator and keep them enabled. + * # For details, see Linux Documentation/hwmon/pwm-fan.rst + * r8a779g3-sparrow-hawk$ echo 2 > /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1_enable + * + * # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed . + * # Fan speed 101 is about 2/5 of the PWM fan speed: + * r8a779g3-sparrow-hawk$ echo 101 > /sys/devices/platform/pwm-fan-ext/hwmon/hwmon0/pwm1 + */ + +/dts-v1/; +/plugin/; + +&{/} { + pwm-fan-ext { + compatible = "pwm-fan"; + #cooling-cells = <2>; + /* PWM period: 33us ~= 30 kHz */ + pwms = <&pwmhat 0 33334 0>; + /* Available cooling levels */ + cooling-levels = <0 50 100 150 200 255>; + fan-shutdown-percent = <100>; + }; +}; + +/* Page 31 / IO_CN */ +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + status = "okay"; + + pwmhat: pwm@1a { + compatible = "argon40,fan-hat"; + reg = <0x1a>; + #pwm-cells = <3>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso new file mode 100644 index 000000000000..bf7b531ae9d9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-5in.dtso @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Overlay for the RPi Display 2 5" MIPI DSI panel connected + * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board + * + * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org> + */ + +#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi" + +&panel { + compatible = "raspberrypi,dsi-5inch", "ilitek,ili9881c"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso new file mode 100644 index 000000000000..6ec47f213c0f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2-7in.dtso @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Overlay for the RPi Display 2 7" MIPI DSI panel connected + * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board + * + * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org> + */ + +#include "r8a779g3-sparrow-hawk-rpi-display-2.dtsi" + +&panel { + compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi new file mode 100644 index 000000000000..733333b85a9d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Overlay for the RPi Display 2 MIPI DSI panel connected + * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board + * + * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org> + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + display_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&mcu 0 255 0>; + }; + + reg_display: regulator-display { + compatible = "regulator-fixed"; + regulator-name = "rpi-display"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_dsi_touch: regulator-dsi-touch { + compatible = "regulator-fixed"; + gpio = <&mcu 1 GPIO_ACTIVE_HIGH>; + regulator-name = "rpi-touch"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + }; +}; + +&i2c0_mux3 { + #address-cells = <1>; + #size-cells = <0>; + + mcu: gpio@45 { + compatible = "raspberrypi,touchscreen-panel-regulator-v2"; + reg = <0x45>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <3>; + }; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <®_dsi_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <1 2>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + backlight = <&display_bl>; + power-supply = <®_display>; + reset-gpios = <&mcu 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts index 1da8e476b219..ff07d984cbf2 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts @@ -119,13 +119,13 @@ }; /* Page 27 / DSI to Display */ - mini-dp-con { + dp-con { compatible = "dp-connector"; label = "CN6"; type = "full-size"; port { - mini_dp_con_in: endpoint { + dp_con_in: endpoint { remote-endpoint = <&sn65dsi86_out>; }; }; @@ -407,7 +407,7 @@ port@1 { reg = <1>; sn65dsi86_out: endpoint { - remote-endpoint = <&mini_dp_con_in>; + remote-endpoint = <&dp_con_in>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi index 0f20a2d23983..4dc0e5304f72 100644 --- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r8a779h0"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* External Audio clock - to be overridden by boards that provide it */ audio_clkin: audio_clkin { @@ -158,7 +159,7 @@ pmu-a76 { compatible = "arm,cortex-a76-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -181,7 +182,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -199,6 +199,16 @@ status = "disabled"; }; + swdt: watchdog@e6030000 { + compatible = "renesas,r8a779h0-wdt", "renesas,rcar-gen4-wdt"; + reg = <0 0xe6030000 0 0x0c>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_CORE R8A779H0_CLK_OSC>; + power-domains = <&sysc R8A779H0_PD_ALWAYS_ON>; + resets = <&cpg 1128>; + status = "disabled"; + }; + pfc: pinctrl@e6050000 { compatible = "renesas,pfc-r8a779h0"; reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>, @@ -2212,11 +2222,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts new file mode 100644 index 000000000000..a721734fbd5d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a78000-ironhide.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the Ironhide board + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a78000.dtsi" + +/ { + model = "Renesas Ironhide board based on r8a78000"; + compatible = "renesas,ironhide", "renesas,r8a78000"; + + aliases { + serial0 = &hscif0; + }; + + chosen { + stdout-path = "serial0:1843200n8"; + }; + + memory@60600000 { + device_type = "memory"; + /* first 518MiB is reserved for other purposes. */ + reg = <0x0 0x60600000 0x0 0x5fa00000>; + }; + + memory@1080000000 { + device_type = "memory"; + reg = <0x10 0x80000000 0x0 0x80000000>; + }; + + memory@1200000000 { + device_type = "memory"; + reg = <0x12 0x00000000 0x1 0x00000000>; + }; + + memory@1400000000 { + device_type = "memory"; + reg = <0x14 0x00000000 0x1 0x00000000>; + }; + + memory@1600000000 { + device_type = "memory"; + reg = <0x16 0x00000000 0x1 0x00000000>; + }; + + memory@1800000000 { + device_type = "memory"; + reg = <0x18 0x00000000 0x1 0x00000000>; + }; + + memory@1a00000000 { + device_type = "memory"; + reg = <0x1a 0x00000000 0x1 0x00000000>; + }; + + memory@1c00000000 { + device_type = "memory"; + reg = <0x1c 0x00000000 0x1 0x00000000>; + }; + + memory@1e00000000 { + device_type = "memory"; + reg = <0x1e 0x00000000 0x1 0x00000000>; + }; +}; + +&extal_clk { + clock-frequency = <16666600>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + uart-has-rtscts; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <26000000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi new file mode 100644 index 000000000000..4c97298fa763 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi @@ -0,0 +1,787 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car X5H (R8A78000) SoC + * + * Copyright (C) 2025 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "renesas,r8a78000"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a720_0>; + }; + core1 { + cpu = <&a720_1>; + }; + core2 { + cpu = <&a720_2>; + }; + core3 { + cpu = <&a720_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&a720_4>; + }; + core1 { + cpu = <&a720_5>; + }; + core2 { + cpu = <&a720_6>; + }; + core3 { + cpu = <&a720_7>; + }; + }; + + cluster2 { + core0 { + cpu = <&a720_8>; + }; + core1 { + cpu = <&a720_9>; + }; + core2 { + cpu = <&a720_10>; + }; + core3 { + cpu = <&a720_11>; + }; + }; + + cluster3 { + core0 { + cpu = <&a720_12>; + }; + core1 { + cpu = <&a720_13>; + }; + core2 { + cpu = <&a720_14>; + }; + core3 { + cpu = <&a720_15>; + }; + }; + + cluster4 { + core0 { + cpu = <&a720_16>; + }; + core1 { + cpu = <&a720_17>; + }; + core2 { + cpu = <&a720_18>; + }; + core3 { + cpu = <&a720_19>; + }; + }; + + cluster5 { + core0 { + cpu = <&a720_20>; + }; + core1 { + cpu = <&a720_21>; + }; + core2 { + cpu = <&a720_22>; + }; + core3 { + cpu = <&a720_23>; + }; + }; + + cluster6 { + core0 { + cpu = <&a720_24>; + }; + core1 { + cpu = <&a720_25>; + }; + core2 { + cpu = <&a720_26>; + }; + core3 { + cpu = <&a720_27>; + }; + }; + + cluster7 { + core0 { + cpu = <&a720_28>; + }; + core1 { + cpu = <&a720_29>; + }; + core2 { + cpu = <&a720_30>; + }; + core3 { + cpu = <&a720_31>; + }; + }; + }; + + a720_0: cpu@0 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x0>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_0>; + }; + + a720_1: cpu@100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_1>; + }; + + a720_2: cpu@200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_2>; + }; + + a720_3: cpu@300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_3>; + }; + + a720_4: cpu@10000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x10000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_4>; + }; + + a720_5: cpu@10100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x10100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_5>; + }; + + a720_6: cpu@10200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x10200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_6>; + }; + + a720_7: cpu@10300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x10300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_7>; + }; + + a720_8: cpu@20000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x20000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_8>; + }; + + a720_9: cpu@20100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x20100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_9>; + }; + + a720_10: cpu@20200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x20200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_10>; + }; + + a720_11: cpu@20300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x20300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_11>; + }; + + a720_12: cpu@30000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x30000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_12>; + }; + + a720_13: cpu@30100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x30100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_13>; + }; + + a720_14: cpu@30200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x30200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_14>; + }; + + a720_15: cpu@30300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x30300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_15>; + }; + + a720_16: cpu@40000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x40000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_16>; + }; + + a720_17: cpu@40100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x40100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_17>; + }; + + a720_18: cpu@40200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x40200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_18>; + }; + + a720_19: cpu@40300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x40300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_19>; + }; + + a720_20: cpu@50000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x50000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_20>; + }; + + a720_21: cpu@50100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x50100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_21>; + }; + + a720_22: cpu@50200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x50200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_22>; + }; + + a720_23: cpu@50300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x50300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_23>; + }; + + a720_24: cpu@60000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x60000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_24>; + }; + + a720_25: cpu@60100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x60100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_25>; + }; + + a720_26: cpu@60200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x60200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_26>; + }; + + a720_27: cpu@60300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x60300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_27>; + }; + + a720_28: cpu@70000 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x70000>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_28>; + }; + + a720_29: cpu@70100 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x70100>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_29>; + }; + + a720_30: cpu@70200 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x70200>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_30>; + }; + + a720_31: cpu@70300 { + compatible = "arm,cortex-a720ae"; + reg = <0x0 0x70300>; + device_type = "cpu"; + next-level-cache = <&L2_CA720_31>; + }; + + L2_CA720_0: cache-controller-200 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_0>; + }; + + L2_CA720_1: cache-controller-201 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_0>; + }; + + L2_CA720_2: cache-controller-202 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_0>; + }; + + L2_CA720_3: cache-controller-203 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_0>; + }; + + L2_CA720_4: cache-controller-204 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_1>; + }; + + L2_CA720_5: cache-controller-205 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_1>; + }; + + L2_CA720_6: cache-controller-206 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_1>; + }; + + L2_CA720_7: cache-controller-207 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_1>; + }; + + L2_CA720_8: cache-controller-208 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_2>; + }; + + L2_CA720_9: cache-controller-209 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_2>; + }; + + L2_CA720_10: cache-controller-210 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_2>; + }; + + L2_CA720_11: cache-controller-211 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_2>; + }; + + L2_CA720_12: cache-controller-212 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_3>; + }; + + L2_CA720_13: cache-controller-213 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_3>; + }; + + L2_CA720_14: cache-controller-214 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_3>; + }; + + L2_CA720_15: cache-controller-215 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_3>; + }; + + L2_CA720_16: cache-controller-216 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_4>; + }; + + L2_CA720_17: cache-controller-217 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_4>; + }; + + L2_CA720_18: cache-controller-218 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_4>; + }; + + L2_CA720_19: cache-controller-219 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_4>; + }; + + L2_CA720_20: cache-controller-220 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_5>; + }; + + L2_CA720_21: cache-controller-221 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_5>; + }; + + L2_CA720_22: cache-controller-222 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_5>; + }; + + L2_CA720_23: cache-controller-223 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_5>; + }; + + L2_CA720_24: cache-controller-224 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_6>; + }; + + L2_CA720_25: cache-controller-225 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_6>; + }; + + L2_CA720_26: cache-controller-226 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_6>; + }; + + L2_CA720_27: cache-controller-227 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_6>; + }; + + L2_CA720_28: cache-controller-228 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_7>; + }; + + L2_CA720_29: cache-controller-229 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_7>; + }; + + L2_CA720_30: cache-controller-230 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_7>; + }; + + L2_CA720_31: cache-controller-231 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + next-level-cache = <&L3_CA720_7>; + }; + + L3_CA720_0: cache-controller-30 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_1: cache-controller-31 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_2: cache-controller-32 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_3: cache-controller-33 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_4: cache-controller-34 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_5: cache-controller-35 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_6: cache-controller-36 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + + L3_CA720_7: cache-controller-37 { + compatible = "cache"; + cache-unified; + cache-level = <3>; + }; + }; + + /* + * In the early phase, there is no clock control support, + * so assume that the clocks are enabled by default. + * Therefore, dummy clocks are used. + */ + dummy_clk_sgasyncd16: dummy-clk-sgasyncd16 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <66666000>; + }; + + dummy_clk_sgasyncd4: dummy-clk-sgasyncd4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <266660000>; + }; + + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* clock-frequency must be set on board */ + }; + + extalr_clk: extalr-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* clock-frequency must be set on board */ + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; /* optional */ + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + prr: chipid@189e0044 { + compatible = "renesas,prr"; + reg = <0 0x189e0044 0 4>; + }; + + /* Application Processors manage View-1 of a GIC-720AE */ + gic: interrupt-controller@39000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x39000000 0 0x10000>, + <0 0x39080000 0 0x800000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + scif0: serial@c0700000 { + compatible = "renesas,scif-r8a78000", + "renesas,rcar-gen5-scif", "renesas,scif"; + reg = <0 0xc0700000 0 0x40>; + interrupts = <GIC_SPI 4074 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + scif1: serial@c0704000 { + compatible = "renesas,scif-r8a78000", + "renesas,rcar-gen5-scif", "renesas,scif"; + reg = <0 0xc0704000 0 0x40>; + interrupts = <GIC_SPI 4075 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + scif3: serial@c0708000 { + compatible = "renesas,scif-r8a78000", + "renesas,rcar-gen5-scif", "renesas,scif"; + reg = <0 0xc0708000 0 0x40>; + interrupts = <GIC_SPI 4076 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + scif4: serial@c070c000 { + compatible = "renesas,scif-r8a78000", + "renesas,rcar-gen5-scif", "renesas,scif"; + reg = <0 0xc070c000 0 0x40>; + interrupts = <GIC_SPI 4077 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + hscif0: serial@c0710000 { + compatible = "renesas,hscif-r8a78000", + "renesas,rcar-gen5-hscif", "renesas,hscif"; + reg = <0 0xc0710000 0 0x60>; + interrupts = <GIC_SPI 4078 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + hscif1: serial@c0714000 { + compatible = "renesas,hscif-r8a78000", + "renesas,rcar-gen5-hscif", "renesas,hscif"; + reg = <0 0xc0714000 0 0x60>; + interrupts = <GIC_SPI 4079 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + hscif2: serial@c0718000 { + compatible = "renesas,hscif-r8a78000", + "renesas,rcar-gen5-hscif", "renesas,hscif"; + reg = <0 0xc0718000 0 0x60>; + interrupts = <GIC_SPI 4080 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + + hscif3: serial@c071c000 { + compatible = "renesas,hscif-r8a78000", + "renesas,rcar-gen5-hscif", "renesas,hscif"; + reg = <0 0xc071c000 0 0x60>; + interrupts = <GIC_SPI 4081 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dummy_clk_sgasyncd4>, <&dummy_clk_sgasyncd4>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index a3998e5928f7..5f5d1b0c31c6 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -12,6 +12,8 @@ #include "r9a07g043.dtsi" / { + interrupt-parent = <&gic>; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -37,7 +39,7 @@ pmu { compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -47,19 +49,17 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; &soc { - interrupt-parent = <&gic>; - cru: video@10830000 { compatible = "renesas,r9a07g043-cru", "renesas,rzg2l-cru"; reg = <0 0x10830000 0 0x400>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index ecaa9c4f305c..bd52d60bafb9 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a07g044"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_clk1: audio1-clk { compatible = "fixed-clock"; @@ -159,7 +160,7 @@ pmu { compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -169,7 +170,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1450,11 +1450,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 669eca74da0a..4e0256d3201d 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a07g054"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_clk1: audio1-clk { compatible = "fixed-clock"; @@ -159,7 +160,7 @@ pmu { compatible = "arm,cortex-a55-pmu"; - interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; }; psci { @@ -169,7 +170,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -1458,11 +1458,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 16e6ac614417..876de634908e 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -13,6 +13,7 @@ compatible = "renesas,r9a08g045"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_clk1: audio1-clk { compatible = "fixed-clock"; @@ -92,7 +93,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -233,7 +233,6 @@ #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; - status = "disabled"; channel@0 { reg = <0>; @@ -272,6 +271,17 @@ }; }; + tsu: thermal@10059000 { + compatible = "renesas,r9a08g045-tsu"; + reg = <0 0x10059000 0 0x1000>; + clocks = <&cpg CPG_MOD R9A08G045_TSU_PCLK>; + resets = <&cpg R9A08G045_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + io-channels = <&adc 8>; + io-channel-names = "tsu"; + }; + i3c: i3c@1005b000 { compatible = "renesas,r9a08g045-i3c"; reg = <0 0x1005b000 0 0x1000>; @@ -717,6 +727,124 @@ status = "disabled"; }; + phyrst: usbphy-ctrl@11e00000 { + compatible = "renesas,r9a08g045-usbphy-ctrl"; + reg = <0 0x11e00000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>; + resets = <&cpg R9A08G045_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + renesas,sysc-pwrrdy = <&sysc 0xd70 0x1>; + status = "disabled"; + + usb0_vbus_otg: regulator-vbus { + regulator-name = "vbus"; + }; + }; + + ohci0: usb@11e10000 { + compatible = "generic-ohci"; + reg = <0 0x11e10000 0 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11e30000 { + compatible = "generic-ohci"; + reg = <0 0x11e30000 0 0x100>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11e10100 { + compatible = "generic-ehci"; + reg = <0 0x11e10100 0 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11e30100 { + compatible = "generic-ehci"; + reg = <0 0x11e30100 0 0x100>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11e10200 { + compatible = "renesas,usb2-phy-r9a08g045"; + reg = <0 0x11e10200 0 0x700>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2H0_HRESETN>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11e30200 { + compatible = "renesas,usb2-phy-r9a08g045"; + reg = <0 0x11e30200 0 0x700>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A08G045_USB_U2H1_HRESETN>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11e20000 { + compatible = "renesas,usbhs-r9a08g045", + "renesas,rzg2l-usbhs"; + reg = <0 0x11e20000 0 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>, + <&cpg CPG_MOD R9A08G045_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A08G045_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + gic: interrupt-controller@12400000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -744,15 +872,52 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu>; + sustainable-power = <423>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + cpu_crit: cpu-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + + cpu_alert1: trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vbattb_xtal: vbattb-xtal { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 9a4cbef704c1..42462c138dd2 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a09g011"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ extal_clk: extal { @@ -50,7 +51,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -368,10 +368,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi index 47d843c79021..7a469de3bb62 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a09g047"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_extal_clk: audio-clk { compatible = "fixed-clock"; @@ -64,6 +65,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK0>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -74,6 +76,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK1>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -84,6 +87,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK2>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -94,6 +98,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G047_CA55_0_CORECLK3>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -155,7 +160,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -617,6 +621,19 @@ status = "disabled"; }; + tsu: thermal@14002000 { + compatible = "renesas,r9a09g047-tsu"; + reg = <0 0x14002000 0 0x1000>; + interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "adi", "adcmpi"; + clocks = <&cpg CPG_MOD 0x10a>; + resets = <&cpg 0xf8>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + renesas,tsu-trim = <&sys 0x330>; + }; + i2c0: i2c@14400400 { compatible = "renesas,riic-r9a09g047", "renesas,riic-r9a09g057"; reg = <0 0x14400400 0 0x400>; @@ -1173,13 +1190,44 @@ snps,blen = <16 8 4 0 0 0 0>; }; + thermal-zones { + cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tsu>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 3>, <&cpu1 0 3>, + <&cpu2 0 3>, <&cpu3 0 3>; + contribution = <1024>; + }; + }; + + trips { + target: trip-point { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor_crit: sensor-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 887110878906..8781c2fa7313 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -30,6 +30,7 @@ compatible = "renesas,r9a09g056"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_extal_clk: audio-clk { compatible = "fixed-clock"; @@ -152,6 +153,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -173,7 +179,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -961,11 +966,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi index 630f7a98df38..4df32d7e9998 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a09g057"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; audio_extal_clk: audio-clk { compatible = "fixed-clock"; @@ -64,6 +65,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK0>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -74,6 +76,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK1>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -84,6 +87,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK2>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -94,6 +98,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A09G057_CA55_0_CORE_CLK3>; + #cooling-cells = <2>; operating-points-v2 = <&cluster0_opp>; }; @@ -134,6 +139,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -155,7 +165,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -280,6 +289,32 @@ resets = <&cpg 0x30>; }; + tsu0: thermal@11000000 { + compatible = "renesas,r9a09g057-tsu", "renesas,r9a09g047-tsu"; + reg = <0 0x11000000 0 0x1000>; + interrupts = <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "adi", "adcmpi"; + clocks = <&cpg CPG_MOD 0x109>; + resets = <&cpg 0xf7>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + renesas,tsu-trim = <&sys 0x320>; + }; + + tsu1: thermal@14002000 { + compatible = "renesas,r9a09g057-tsu", "renesas,r9a09g047-tsu"; + reg = <0 0x14002000 0 0x1000>; + interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "adi", "adcmpi"; + clocks = <&cpg CPG_MOD 0x10a>; + resets = <&cpg 0xf8>; + power-domains = <&cpg>; + #thermal-sensor-cells = <0>; + renesas,tsu-trim = <&sys 0x330>; + }; + xspi: spi@11030000 { compatible = "renesas,r9a09g057-xspi", "renesas,r9a09g047-xspi"; reg = <0 0x11030000 0 0x10000>, @@ -586,6 +621,21 @@ status = "disabled"; }; + rtc: rtc@11c00800 { + compatible = "renesas,r9a09g057-rtca3", "renesas,rz-rtca3"; + reg = <0 0x11c00800 0 0x400>; + interrupts = <GIC_SPI 524 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 525 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 526 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "period", "carry"; + clocks = <&cpg CPG_MOD 0x53>, <&rtxin_clk>; + clock-names = "bus", "counter"; + power-domains = <&cpg>; + resets = <&cpg 0x79>, <&cpg 0x7a>; + reset-names = "rtc", "rtest"; + status = "disabled"; + }; + scif: serial@11c01400 { compatible = "renesas,scif-r9a09g057"; reg = <0 0x11c01400 0 0x400>; @@ -1307,13 +1357,58 @@ snps,blen = <16 8 4 0 0 0 0>; }; + thermal-zones { + sensor1_thermal: sensor1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tsu0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor2_thermal: sensor2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tsu1>; + + cooling-maps { + map0 { + trip = <&sensor2_target>; + cooling-device = <&cpu0 0 3>, <&cpu1 0 3>, + <&cpu2 0 3>, <&cpu3 0 3>; + contribution = <1024>; + }; + }; + + trips { + sensor2_target: trip-point { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts index 5c06bce3d5b4..445fce156f73 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts @@ -9,6 +9,7 @@ #include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include "r9a09g057.dtsi" / { @@ -34,6 +35,18 @@ stdout-path = "serial0:115200n8"; }; + keys: keys { + compatible = "gpio-keys"; + + key-wakeup { + interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_WAKEUP>; + label = "NMI_SW"; + debounce-interval = <20>; + wakeup-source; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -388,6 +401,10 @@ clock-frequency = <24000000>; }; +&rtc { + status = "okay"; +}; + &rtxin_clk { clock-frequency = <32768>; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi index 7f1aca218c9f..f5fa6ca06409 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a09g077"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -64,6 +65,11 @@ clock-frequency = <0>; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -71,7 +77,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -265,6 +270,481 @@ status = "disabled"; }; + gmac0: ethernet@80100000 { + compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20"; + reg = <0 0x80100000 0 0x10000>; + interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 400>, + <&cpg CPG_CORE R9A09G077_CLK_PCLKH>, + <&cpg CPG_CORE R9A09G077_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 400>, <&cpg 401>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + gmac1: ethernet@92000000 { + compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20"; + reg = <0 0x92000000 0 0x10000>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 416>, + <&cpg CPG_CORE R9A09G077_CLK_PCLKAH>, + <&cpg CPG_CORE R9A09G077_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 416>, <&cpg 417>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + gmac2: ethernet@92010000 { + compatible = "renesas,r9a09g077-gbeth", "snps,dwmac-5.20"; + reg = <0 0x92010000 0 0x10000>; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 417>, + <&cpg CPG_CORE R9A09G077_CLK_PCLKAH>, + <&cpg CPG_CORE R9A09G077_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 418>, <&cpg 419>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup2>; + snps,mtl-tx-config = <&mtl_tx_setup2>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio2: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup2: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup2: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + ethss: ethss@80110000 { + compatible = "renesas,r9a09g077-miic"; + reg = <0 0x80110000 0 0x10000>; + clocks = <&cpg CPG_CORE R9A09G077_ETCLKE>, + <&cpg CPG_CORE R9A09G077_ETCLKB>, + <&cpg CPG_CORE R9A09G077_ETCLKD>, + <&cpg CPG_MOD 403>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + resets = <&cpg 405>, <&cpg 406>; + reset-names = "rst", "crst"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + mii_conv0: mii-conv@0 { + reg = <0>; + status = "disabled"; + }; + + mii_conv1: mii-conv@1 { + reg = <1>; + status = "disabled"; + }; + + mii_conv2: mii-conv@2 { + reg = <2>; + status = "disabled"; + }; + + mii_conv3: mii-conv@3 { + reg = <3>; + status = "disabled"; + }; + }; + cpg: clock-controller@80280000 { compatible = "renesas,r9a09g077-cpg-mssr"; reg = <0 0x80280000 0 0x1000>, @@ -299,6 +779,72 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + adc0: adc@90014000 { + compatible = "renesas,r9a09g077-adc"; + reg = <0 0x90014000 0 0x400>; + interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>, + <&cpg CPG_MOD 206>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc1: adc@90014400 { + compatible = "renesas,r9a09g077-adc"; + reg = <0 0x90014400 0 0x400>; + interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>, + <&cpg CPG_MOD 207>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc2: adc@80008000 { + compatible = "renesas,r9a09g077-adc"; + reg = <0 0x80008000 0 0x400>; + interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>, + <&cpg CPG_MOD 225>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + ohci: usb@92040000 { compatible = "generic-ohci"; reg = <0 0x92040000 0 0x100>; @@ -387,13 +933,20 @@ }; }; + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts index 2bf867273ad0..b7706d0bc3aa 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts @@ -149,8 +149,78 @@ status = "okay"; }; +&mdio1_phy { + reset-gpios = <&pinctrl RZT2H_GPIO(32, 3) GPIO_ACTIVE_LOW>; +}; + +&mdio2_phy { + /* + * PHY2 Reset Configuration: + * + * SW6[1] OFF; SW6[2] ON; SW6[3] OFF - use pin P17_5 for GMAC_RESETOUT2# + */ + reset-gpios = <&pinctrl RZT2H_GPIO(17, 5) GPIO_ACTIVE_LOW>; +}; + &pinctrl { /* + * GMAC2 Pin Configuration: + * + * SW2[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2 + * SW2[7] ON - use pins P29_1-P29_7, P30_0-P30_4, and P31_2-P31_5 + * for Ethernet port 2 + */ + gmac2_pins: gmac2-pins { + pinmux = <RZT2H_PORT_PINMUX(29, 1, 0xf)>, /* ETH2_TXCLK */ + <RZT2H_PORT_PINMUX(29, 2, 0xf)>, /* ETH2_TXD0 */ + <RZT2H_PORT_PINMUX(29, 3, 0xf)>, /* ETH2_TXD1 */ + <RZT2H_PORT_PINMUX(29, 4, 0xf)>, /* ETH2_TXD2 */ + <RZT2H_PORT_PINMUX(29, 5, 0xf)>, /* ETH2_TXD3 */ + <RZT2H_PORT_PINMUX(29, 6, 0xf)>, /* ETH2_TXEN */ + <RZT2H_PORT_PINMUX(29, 7, 0xf)>, /* ETH2_RXCLK */ + <RZT2H_PORT_PINMUX(30, 0, 0xf)>, /* ETH2_RXD0 */ + <RZT2H_PORT_PINMUX(30, 1, 0xf)>, /* ETH2_RXD1 */ + <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */ + <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */ + <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */ + <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */ + <RZT2H_PORT_PINMUX(31, 3, 0xf)>, /* ETH2_RXER */ + <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */ + <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */ + <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */ + <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */ + <RZT2H_PORT_PINMUX(31, 0, 0x2)>; /* ETH2_REFCLK */ + }; + + /* + * GMAC1 Pin Configuration: + * + * SW2[8] ON - use pins P33_2-P33_7, P34_0-P34_5, P34_7 and + * P35_0-P35_2 for Ethernet port 3 + */ + gmac1_pins: gmac1-pins { + pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */ + <RZT2H_PORT_PINMUX(33, 3, 0xf)>, /* ETH3_TXD0 */ + <RZT2H_PORT_PINMUX(33, 4, 0xf)>, /* ETH3_TXD1 */ + <RZT2H_PORT_PINMUX(33, 5, 0xf)>, /* ETH3_TXD2 */ + <RZT2H_PORT_PINMUX(33, 6, 0xf)>, /* ETH3_TXD3 */ + <RZT2H_PORT_PINMUX(33, 7, 0xf)>, /* ETH3_TXEN */ + <RZT2H_PORT_PINMUX(34, 0, 0xf)>, /* ETH3_RXCLK */ + <RZT2H_PORT_PINMUX(34, 1, 0xf)>, /* ETH3_RXD0 */ + <RZT2H_PORT_PINMUX(34, 2, 0xf)>, /* ETH3_RXD1 */ + <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */ + <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */ + <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */ + <RZT2H_PORT_PINMUX(34, 7, 0xf)>, /* ETH3_TXER */ + <RZT2H_PORT_PINMUX(35, 0, 0xf)>, /* ETH3_RXER */ + <RZT2H_PORT_PINMUX(35, 1, 0xf)>, /* ETH3_CRS */ + <RZT2H_PORT_PINMUX(35, 2, 0xf)>, /* ETH3_COL */ + <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */ + <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */ + <RZT2H_PORT_PINMUX(34, 6, 0x2)>; /* ETH3_REFCLK */ + }; + + /* * I2C0 Pin Configuration: * ------------------------ * Signal | Pin | SW6 @@ -182,3 +252,31 @@ <RZT2H_PORT_PINMUX(0, 1, 0x13)>; /* OVRCUR */ }; }; + +&adc2 { + status = "okay"; + + channel@0 { + reg = <0x0>; + }; + + channel@1 { + reg = <0x1>; + }; + + channel@2 { + reg = <0x2>; + }; + + channel@3 { + reg = <0x3>; + }; + + channel@4 { + reg = <0x4>; + }; + + channel@5 { + reg = <0x5>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi index f06c19c73adb..361a9235f00d 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi @@ -12,6 +12,7 @@ compatible = "renesas,r9a09g087"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -64,6 +65,11 @@ clock-frequency = <0>; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -71,7 +77,6 @@ soc: soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -265,6 +270,484 @@ status = "disabled"; }; + gmac0: ethernet@80100000 { + compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x80100000 0 0x10000>; + interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 516 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 400>, + <&cpg CPG_CORE R9A09G087_CLK_PCLKH>, + <&cpg CPG_CORE R9A09G087_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 400>, <&cpg 401>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup0>; + snps,mtl-tx-config = <&mtl_tx_setup0>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup0: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup0: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + gmac1: ethernet@92000000 { + compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x92000000 0 0x10000>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 416>, + <&cpg CPG_CORE R9A09G087_CLK_PCLKAH>, + <&cpg CPG_CORE R9A09G087_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 416>, <&cpg 417>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + gmac2: ethernet@92010000 { + compatible = "renesas,r9a09g087-gbeth", "renesas,r9a09g077-gbeth", + "snps,dwmac-5.20"; + reg = <0 0x92010000 0 0x10000>; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "rx-queue-4", "rx-queue-5", + "rx-queue-6", "rx-queue-7", "tx-queue-0", + "tx-queue-1", "tx-queue-2", "tx-queue-3", + "tx-queue-4", "tx-queue-5", "tx-queue-6", + "tx-queue-7"; + clocks = <&cpg CPG_MOD 417>, + <&cpg CPG_CORE R9A09G087_CLK_PCLKAH>, + <&cpg CPG_CORE R9A09G087_ETCLKB>; + clock-names = "stmmaceth", "pclk", "tx"; + resets = <&cpg 418>, <&cpg 419>; + reset-names = "stmmaceth", "ahb"; + power-domains = <&cpg>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <32>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup2>; + snps,mtl-tx-config = <&mtl_tx_setup2>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + status = "disabled"; + + mdio2: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup2: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0x10>; + snps,map-to-dma-channel = <4>; + }; + + queue5 { + snps,dcb-algorithm; + snps,priority = <0x20>; + snps,map-to-dma-channel = <5>; + }; + + queue6 { + snps,dcb-algorithm; + snps,priority = <0x40>; + snps,map-to-dma-channel = <6>; + }; + + queue7 { + snps,dcb-algorithm; + snps,priority = <0x80>; + snps,map-to-dma-channel = <7>; + }; + }; + + mtl_tx_setup2: tx-queues-config { + snps,tx-queues-to-use = <8>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,dcb-algorithm; + }; + + queue3 { + snps,dcb-algorithm; + }; + + queue4 { + snps,dcb-algorithm; + }; + + queue5 { + snps,dcb-algorithm; + }; + + queue6 { + snps,dcb-algorithm; + }; + + queue7 { + snps,dcb-algorithm; + }; + }; + }; + + ethss: ethss@80110000 { + compatible = "renesas,r9a09g087-miic", "renesas,r9a09g077-miic"; + reg = <0 0x80110000 0 0x10000>; + clocks = <&cpg CPG_CORE R9A09G087_ETCLKE>, + <&cpg CPG_CORE R9A09G087_ETCLKB>, + <&cpg CPG_CORE R9A09G087_ETCLKD>, + <&cpg CPG_MOD 403>; + clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk"; + resets = <&cpg 405>, <&cpg 406>; + reset-names = "rst", "crst"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + mii_conv0: mii-conv@0 { + reg = <0>; + status = "disabled"; + }; + + mii_conv1: mii-conv@1 { + reg = <1>; + status = "disabled"; + }; + + mii_conv2: mii-conv@2 { + reg = <2>; + status = "disabled"; + }; + + mii_conv3: mii-conv@3 { + reg = <3>; + status = "disabled"; + }; + }; + cpg: clock-controller@80280000 { compatible = "renesas,r9a09g087-cpg-mssr"; reg = <0 0x80280000 0 0x1000>, @@ -299,6 +782,72 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; }; + adc0: adc@90014000 { + compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc"; + reg = <0 0x90014000 0 0x400>; + interrupts = <GIC_SPI 698 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 699 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 700 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 701 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 851 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 852 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>, + <&cpg CPG_MOD 206>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc1: adc@90014400 { + compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc"; + reg = <0 0x90014400 0 0x400>; + interrupts = <GIC_SPI 703 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 853 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 854 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>, + <&cpg CPG_MOD 207>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + adc2: adc@80008000 { + compatible = "renesas,r9a09g087-adc", "renesas,r9a09g077-adc"; + reg = <0 0x80008000 0 0x400>; + interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>, + <&cpg CPG_MOD 225>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + ohci: usb@92040000 { compatible = "generic-ohci"; reg = <0 0x92040000 0 0x100>; @@ -387,13 +936,20 @@ }; }; + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, - <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt"; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts index 084b3a0c8052..17c0c79fbd96 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts @@ -186,8 +186,86 @@ status = "okay"; }; +&mdio1_phy { + /* + * PHY3 Reset Configuration: + * + * DSW12[5] OFF; DSW12[6] ON - use pin P03_2 for GMAC_RESETOUT3# + */ + reset-gpios = <&pinctrl RZT2H_GPIO(3, 2) GPIO_ACTIVE_LOW>; +}; + +&mdio2_phy { + /* + * PHY2 Reset Configuration: + * + * DSW8[1] ON; DSW8[2] OFF; DSW12[7] OFF; DSW12[8] ON - use pin + * P03_1 for GMAC_RESETOUT2# + */ + reset-gpios = <&pinctrl RZT2H_GPIO(3, 1) GPIO_ACTIVE_LOW>; +}; + &pinctrl { /* + * GMAC2 Pin Configuration: + * + * DSW5[6] OFF - connect MDC/MDIO of Ethernet port 2 to GMAC2 + * DSW5[7] ON - use pins P29_1-P29_7, P30_0-P30_4, P30_7, + * P31_2, P31_4 and P31_5 are used for Ethernet port 2 + */ + gmac2_pins: gmac2-pins { + pinmux = <RZT2H_PORT_PINMUX(29, 1, 0xf)>, /* ETH2_TXCLK */ + <RZT2H_PORT_PINMUX(29, 2, 0xf)>, /* ETH2_TXD0 */ + <RZT2H_PORT_PINMUX(29, 3, 0xf)>, /* ETH2_TXD1 */ + <RZT2H_PORT_PINMUX(29, 4, 0xf)>, /* ETH2_TXD2 */ + <RZT2H_PORT_PINMUX(29, 5, 0xf)>, /* ETH2_TXD3 */ + <RZT2H_PORT_PINMUX(29, 6, 0xf)>, /* ETH2_TXEN */ + <RZT2H_PORT_PINMUX(29, 7, 0xf)>, /* ETH2_RXCLK */ + <RZT2H_PORT_PINMUX(30, 0, 0xf)>, /* ETH2_RXD0 */ + <RZT2H_PORT_PINMUX(30, 1, 0xf)>, /* ETH2_RXD1 */ + <RZT2H_PORT_PINMUX(30, 2, 0xf)>, /* ETH2_RXD2 */ + <RZT2H_PORT_PINMUX(30, 3, 0xf)>, /* ETH2_RXD3 */ + <RZT2H_PORT_PINMUX(30, 4, 0xf)>, /* ETH2_RXDV */ + <RZT2H_PORT_PINMUX(31, 2, 0xf)>, /* ETH2_TXER */ + <RZT2H_PORT_PINMUX(31, 1, 0xf)>, /* ETH2_RXER */ + <RZT2H_PORT_PINMUX(31, 4, 0xf)>, /* ETH2_CRS */ + <RZT2H_PORT_PINMUX(31, 5, 0xf)>, /* ETH2_COL */ + <RZT2H_PORT_PINMUX(30, 5, 0x10)>, /* GMAC2_MDC */ + <RZT2H_PORT_PINMUX(30, 6, 0x10)>, /* GMAC2_MDIO */ + <RZT2H_PORT_PINMUX(31, 0, 0x2)>; /* ETH2_REFCLK */ + + }; + + /* + * GMAC2 Pin Configuration: + * + * DSW5[8] ON - use pins P00_0-P00_2, P33_2-P33_7, P34_0-P34_6 + * for Ethernet port 3 + * DSW12[1] OFF; DSW12[2] ON - use pin P00_3 for Ethernet port 3 + */ + gmac1_pins: gmac1-pins { + pinmux = <RZT2H_PORT_PINMUX(33, 2, 0xf)>, /* ETH3_TXCLK */ + <RZT2H_PORT_PINMUX(33, 3, 0xf)>, /* ETH3_TXD0 */ + <RZT2H_PORT_PINMUX(33, 4, 0xf)>, /* ETH3_TXD0 */ + <RZT2H_PORT_PINMUX(33, 5, 0xf)>, /* ETH3_TXD2 */ + <RZT2H_PORT_PINMUX(33, 6, 0xf)>, /* ETH3_TXD3 */ + <RZT2H_PORT_PINMUX(33, 7, 0xf)>, /* ETH3_TXEN */ + <RZT2H_PORT_PINMUX(34, 0, 0xf)>, /* ETH3_RXCLK */ + <RZT2H_PORT_PINMUX(34, 1, 0xf)>, /* ETH3_RXD0 */ + <RZT2H_PORT_PINMUX(34, 2, 0xf)>, /* ETH3_RXD1 */ + <RZT2H_PORT_PINMUX(34, 3, 0xf)>, /* ETH3_RXD2 */ + <RZT2H_PORT_PINMUX(34, 4, 0xf)>, /* ETH3_RXD3 */ + <RZT2H_PORT_PINMUX(34, 5, 0xf)>, /* ETH3_RXDV */ + <RZT2H_PORT_PINMUX(0, 0, 0xf)>, /* ETH3_TXER */ + <RZT2H_PORT_PINMUX(0, 1, 0xf)>, /* ETH3_RXER */ + <RZT2H_PORT_PINMUX(0, 2, 0xf)>, /* ETH3_CRS */ + <RZT2H_PORT_PINMUX(0, 3, 0xf)>, /* ETH3_COL */ + <RZT2H_PORT_PINMUX(26, 1, 0x10)>, /* GMAC1_MDC */ + <RZT2H_PORT_PINMUX(26, 2, 0x10)>, /* GMAC1_MDIO */ + <RZT2H_PORT_PINMUX(34, 6, 0x2)>; /* ETH3_REFCLK */ + }; + + /* * I2C0 Pin Configuration: * ------------------------ * Signal | Pin | DSW15 @@ -227,3 +305,67 @@ <RZT2H_PORT_PINMUX(2, 3, 0x13)>; /* OVRCUR */ }; }; + +&adc2 { + status = "okay"; + + channel@0 { + reg = <0x0>; + }; + + channel@1 { + reg = <0x1>; + }; + + channel@2 { + reg = <0x2>; + }; + + channel@3 { + reg = <0x3>; + }; + + channel@4 { + reg = <0x4>; + }; + + channel@5 { + reg = <0x5>; + }; + + channel@6 { + reg = <0x6>; + }; + + channel@7 { + reg = <0x7>; + }; + + channel@8 { + reg = <0x8>; + }; + + channel@9 { + reg = <0x9>; + }; + + channel@a { + reg = <0xa>; + }; + + channel@b { + reg = <0xb>; + }; + + channel@c { + reg = <0xc>; + }; + + channel@d { + reg = <0xd>; + }; + + channel@e { + reg = <0xe>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi index c5bb63c63b47..4d2b0655859a 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi @@ -64,7 +64,6 @@ compatible = "ovti,ov5645"; reg = <0x3c>; clocks = <&ov5645_fixed_clk>; - clock-frequency = <24000000>; vdddo-supply = <&ov5645_vdddo_1v8>; vdda-supply = <&ov5645_vdda_2v8>; vddd-supply = <&ov5645_vddd_1v5>; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index 39845faec894..6f25ab617982 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -84,10 +84,6 @@ }; }; -&adc { - status = "okay"; -}; - #if SW_CONFIG3 == SW_ON ð0 { pinctrl-0 = <ð0_pins>; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index 5e044a4d0234..6b0bb2c441af 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -92,6 +92,20 @@ clock-frequency = <12288000>; }; +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -132,6 +146,19 @@ }; }; +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + &pinctrl { audio_clock_pins: audio-clock { pins = "AUDIO_CLK1", "AUDIO_CLK2"; @@ -207,6 +234,23 @@ <RZG2L_PORT_PINMUX(18, 4, 8)>, /* TXD */ <RZG2L_PORT_PINMUX(18, 5, 8)>; /* RXD */ }; + + usb0_pins: usb0 { + peri { + pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 2, 1)>; /* OVC */ + }; + + otg { + pinmux = <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */ + bias-pull-up; + }; + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */ + <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */ + }; }; &scif0 { @@ -242,3 +286,16 @@ pinctrl-0 = <&ssi3_pins>, <&audio_clock_pins>; status = "okay"; }; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi index 5c91002c99c4..3eed1f3948e8 100644 --- a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi +++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi @@ -7,10 +7,14 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/net/mscc-phy-vsc8531.h> +#include <dt-bindings/net/renesas,r9a09g077-pcs-miic.h> #include <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h> / { aliases { + ethernet3 = &gmac1; + ethernet2 = &gmac2; i2c0 = &i2c0; i2c1 = &i2c1; mmc0 = &sdhi0; @@ -70,10 +74,34 @@ status = "okay"; }; +ðss { + status = "okay"; + + renesas,miic-switch-portin = <ETHSS_GMAC0_PORT>; +}; + &extal_clk { clock-frequency = <25000000>; }; +&gmac1 { + pinctrl-0 = <&gmac1_pins>; + pinctrl-names = "default"; + phy-handle = <&mdio1_phy>; + phy-mode = "rgmii-id"; + pcs-handle = <&mii_conv3>; + status = "okay"; +}; + +&gmac2 { + pinctrl-0 = <&gmac2_pins>; + pinctrl-names = "default"; + phy-handle = <&mdio2_phy>; + phy-mode = "rgmii-id"; + pcs-handle = <&mii_conv2>; + status = "okay"; +}; + &hsusb { dr_mode = "otg"; status = "okay"; @@ -87,6 +115,48 @@ }; }; +&mdio1 { + mdio1_phy: ethernet-phy@3 { + compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22"; + reg = <3>; + vsc8531,led-0-mode = <VSC8531_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>; + reset-assert-us = <2000>; + reset-deassert-us = <15000>; + }; +}; + +&mdio2 { + mdio2_phy: ethernet-phy@2 { + compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22"; + reg = <2>; + vsc8531,led-0-mode = <VSC8531_ACTIVITY>; + vsc8531,led-1-mode = <VSC8531_LINK_ACTIVITY>; + reset-assert-us = <2000>; + reset-deassert-us = <15000>; + }; +}; + +&mii_conv0 { + renesas,miic-input = <ETHSS_ETHSW_PORT0>; + status = "okay"; +}; + +&mii_conv1 { + renesas,miic-input = <ETHSS_ETHSW_PORT1>; + status = "okay"; +}; + +&mii_conv2 { + renesas,miic-input = <ETHSS_GMAC2_PORT>; + status = "okay"; +}; + +&mii_conv3 { + renesas,miic-input = <ETHSS_GMAC1_PORT>; + status = "okay"; +}; + &ohci { dr_mode = "otg"; status = "okay"; @@ -244,3 +314,82 @@ status = "okay"; timeout-sec = <60>; }; + +/* + * ADC0 AN000 can be connected to a potentiometer on the board or + * exposed on ADC header. + * + * T2H: + * SW17[1] = ON, SW17[2] = OFF - Potentiometer + * SW17[1] = OFF, SW17[2] = ON - CN41 header + * N2H: + * DSW6[1] = OFF, DSW6[2] = ON - Potentiometer + * DSW6[1] = ON, DSW6[2] = OFF - CN3 header + */ +&adc0 { + status = "okay"; + + channel@0 { + reg = <0x0>; + }; + + channel@1 { + reg = <0x1>; + }; + + channel@2 { + reg = <0x2>; + }; + + channel@3 { + reg = <0x3>; + }; +}; + +/* + * ADC1 AN100 can be exposed on ADC header or on mikroBUS connector. + * + * T2H: + * SW18[1] = ON, SW18[2] = OFF - CN42 header + * SW18[1] = OFF, SW18[2] = ON - mikroBUS + * N2H: + * DSW6[3] = ON, DSW6[4] = OFF - CN4 header + * DSW6[3] = OFF, DSW6[4] = ON - mikroBUS + * + * ADC1 AN101 can be exposed on ADC header or on Grove2 connector. + * + * T2H: + * SW18[3] = ON, SW18[4] = OFF - CN42 header + * SW18[3] = OFF, SW18[4] = ON - Grove2 + * N2H: + * DSW6[5] = ON, DSW6[6] = OFF - CN4 header + * DSW6[5] = OFF, DSW6[6] = ON - Grove2 + * + * ADC1 AN102 can be exposed on ADC header or on Grove2 connector. + * + * T2H: + * SW18[5] = ON, SW18[6] = OFF - CN42 header + * SW18[5] = OFF, SW18[6] = ON - Grove2 + * N2H: + * DSW6[7] = ON, DSW6[8] = OFF - CN4 header + * DSW6[7] = OFF, DSW6[8] = ON - Grove2 + */ +&adc1 { + status = "okay"; + + channel@0 { + reg = <0x0>; + }; + + channel@1 { + reg = <0x1>; + }; + + channel@2 { + reg = <0x2>; + }; + + channel@3 { + reg = <0x3>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index bbb3583372d0..fa8bfee07b3c 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -1004,6 +1004,11 @@ shared-pin; }; +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; + &usb_extal_clk { clock-frequency = <50000000>; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 8a30908992ab..a9e53b36f1d9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -495,6 +495,11 @@ shared-pin; }; +/* Firmware should reserve it but sadly doesn't */ +&swdt { + status = "reserved"; +}; + &usb2_phy1 { pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index ad684e3831bc..dbdda9783e93 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -130,7 +130,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3s.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-9tripod-x3568-v4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-easepi-r1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb @@ -142,6 +146,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb @@ -150,11 +155,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-100ask-dshanpi-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-r76s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 46f64cd33b9b..6d457da6fa03 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -1241,6 +1241,18 @@ status = "disabled"; }; + cif: video-capture@ff490000 { + compatible = "rockchip,px30-vip"; + reg = <0x0 0xff490000 0x0 0x200>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>; + clock-names = "aclk", "hclk", "pclk"; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>; + reset-names = "axi", "ahb", "pclkin"; + status = "disabled"; + }; + isp: isp@ff4a0000 { compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/ reg = <0x0 0xff4a0000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index 7a32972bc249..c1e3098b9a7b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -35,7 +35,6 @@ function = LED_FUNCTION_POWER; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; label = "rockpis:green:power"; - linux,default-trigger = "default-on"; }; blue-led { diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 96c27fc5005d..3566c14850c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -184,7 +184,7 @@ &gmac2phy { assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; - assigned-clock-rate = <50000000>; + assigned-clock-rates = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 3707df6acf1f..76715de886e2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -101,7 +101,7 @@ &gmac2phy { phy-supply = <&vcc_phy>; clock_in_out = "output"; - assigned-clock-rate = <50000000>; + assigned-clock-rates = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 283d9cbc4368..03b7c4313750 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -598,7 +598,6 @@ pinctrl-2 = <&otp_pin>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <100000>; #thermal-sensor-cells = <1>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 73618df7a889..ce4b112b082b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -140,6 +140,12 @@ }; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + status = "disabled"; + }; + arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, @@ -847,6 +853,31 @@ status = "disabled"; }; + vop: vop@ff930000 { + compatible = "rockchip,rk3368-vop"; + reg = <0x0 0xff930000 0x0 0x2fc>, <0x0 0xff931000 0x0 0x400>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + assigned-clock-rates = <400000000>, <200000000>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3368_PD_VIO>; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in_vop>; + }; + }; + }; + vop_mmu: iommu@ff930300 { compatible = "rockchip,iommu"; reg = <0x0 0xff930300 0x0 0x100>; @@ -858,6 +889,50 @@ status = "disabled"; }; + mipi_dsi: dsi@ff960000 { + compatible = "rockchip,rk3368-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x0 0xff960000 0x0 0x4000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI_DSI0>; + clock-names = "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&power RK3368_PD_VIO>; + resets = <&cru SRST_MIPIDSI0>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; + + dsi_in_vop: endpoint { + remote-endpoint = <&vop_out_dsi>; + }; + }; + + mipi_out: port@1 { + reg = <1>; + }; + + }; + }; + + dphy: phy@ff968000 { + compatible = "rockchip,rk3368-dsi-dphy"; + reg = <0x0 0xff968000 0x0 0x4000>; + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_DPHYTX0>; + clock-names = "ref", "pclk"; + #phy-cells = <0>; + resets = <&cru SRST_MIPIDPHYTX>; + reset-names = "apb"; + status = "disabled"; + }; + hevc_mmu: iommu@ff9a0440 { compatible = "rockchip,iommu"; reg = <0x0 0xff9a0440 0x0 0x40>, diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi index c4f4f1ff6117..9da6fd82e46b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1.dtsi @@ -3,7 +3,7 @@ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd */ -#include "rk3399.dtsi" +#include "rk3399-base.dtsi" / { cluster0_opp: opp-table-0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso index 5e8f729c2cf2..141a921a06e4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso @@ -45,11 +45,11 @@ cam_dovdd_1v8: regulator-cam-dovdd-1v8 { compatible = "regulator-fixed"; - gpio = <&pca9670 3 GPIO_ACTIVE_LOW>; - regulator-max-microvolt = <1800000>; - regulator-min-microvolt = <1800000>; - regulator-name = "cam-dovdd-1v8"; - vin-supply = <&vcc1v8_video>; + gpio = <&pca9670 3 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "cam-dovdd-1v8"; + vin-supply = <&vcc1v8_video>; }; cam_dvdd_1v2: regulator-cam-dvdd-1v2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 962b8b231c96..74160cf89188 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -39,8 +39,8 @@ led-0 { function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_GREEN>; + default-state = "on"; gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; }; /* USER_LED2 */ diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts index 12eec2c1db22..b32452756155 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts @@ -171,6 +171,10 @@ }; }; +&combphy { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_arm>; }; @@ -229,6 +233,14 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pciem1_pins>; + reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3>; + status = "okay"; +}; + &pinctrl { ethernet { gmac1_rstn_l: gmac1-rstn-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts index c03ae1dd3456..0b696d49b71f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts @@ -45,7 +45,6 @@ default-state = "on"; function = LED_FUNCTION_STATUS; gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "default-on"; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi index d5f8f7b9bf01..d402f2828814 100644 --- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rockchip,rk3528-cru.h> #include <dt-bindings/power/rockchip,rk3528-power.h> @@ -278,10 +279,63 @@ soc { compatible = "simple-bus"; - ranges = <0x0 0xfe000000 0x0 0xfe000000 0x0 0x2000000>; + ranges = <0x0 0xfc000000 0x0 0xfc000000 0x0 0x44000000>; #address-cells = <2>; #size-cells = <2>; + pcie: pcie@fe000000 { + compatible = "rockchip,rk3528-pcie", + "rockchip,rk3568-pcie"; + reg = <0x0 0xfe000000 0x0 0x400000>, + <0x0 0xfe4f0000 0x0 0x010000>, + <0x0 0xfc000000 0x0 0x100000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x0 0xff>; + clocks = <&cru ACLK_PCIE>, <&cru HCLK_PCIE_SLV>, + <&cru HCLK_PCIE_DBI>, <&cru PCLK_PCIE>, + <&cru CLK_PCIE_AUX>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err", + "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + linux,pci-domain = <0>; + max-link-speed = <2>; + num-lanes = <1>; + phys = <&combphy PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3528_PD_VPU>; + ranges = <0x01000000 0x0 0xfc100000 0x0 0xfc100000 0x0 0x00100000>, + <0x02000000 0x0 0xfc200000 0x0 0xfc200000 0x0 0x01e00000>, + <0x03000000 0x1 0x00000000 0x1 0x00000000 0x0 0x40000000>; + resets = <&cru SRST_PCIE_POWER_UP>, <&cru SRST_P_PCIE>; + reset-names = "pwr", "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 155 IRQ_TYPE_EDGE_RISING>; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + gic: interrupt-controller@fed01000 { compatible = "arm,gic-400"; reg = <0x0 0xfed01000 0 0x1000>, diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi index 7f578c50b4ad..b6cf03a7ba66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi @@ -120,7 +120,7 @@ compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie"; enable-active-high; - gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie_drv>; regulator-always-on; @@ -187,7 +187,7 @@ vcc5v0_usb2b: regulator-vcc5v0-usb2b { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb2b_en>; regulator-name = "vcc5v0_usb2b"; @@ -199,7 +199,7 @@ vcc5v0_usb2t: regulator-vcc5v0-usb2t { compatible = "regulator-fixed"; enable-active-high; - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb2t_en>; regulator-name = "vcc5v0_usb2t"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi index d539570f531e..e2f0ccc6dbe7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-orangepi-3b.dtsi @@ -435,6 +435,11 @@ }; }; +&i2c2 { + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + &i2s0_8ch { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi index d0e38412d56a..08bf40de17ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi @@ -789,7 +789,7 @@ vccio1-supply = <&vccio_acodec>; vccio2-supply = <&vcc_1v8>; vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; + vccio4-supply = <&vcca1v8_pmu>; vccio5-supply = <&vcc_1v8>; vccio6-supply = <&vcc1v8_dvp>; vccio7-supply = <&vcc_3v3>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts index 6224d72813e5..80ac40555e02 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts @@ -466,6 +466,7 @@ compatible = "belling,bl24c16a", "atmel,24c16"; reg = <0x50>; pagesize = <16>; + vcc-supply = <&vcca1v8_pmu>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts new file mode 100644 index 000000000000..9f3cdaad1c9a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com> + */ + +/dts-v1/; + +#include "rk3566-tinker-board-3.dtsi" + +/ { + model = "Asus Tinker Board 3"; + compatible = "asus,rk3566-tinker-board-3", "rockchip,rk3566"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi new file mode 100644 index 000000000000..d9cb73e71d56 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + mmc1 = &sdmmc0; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc1"; + }; + + rsv-led { + gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; + linux,default-trigger="none"; + }; + }; + + vcc3v3_sys: regulator-3v3-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_usb_host: regulator-5v0-vcc-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&u2_a_vbus_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clocks = <&cru I2S1_MCLKOUT_TX>; + clock-names = "mclk"; + clock-output-names = "rk809-clkout1", "rk809-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + #sound-dai-cells = <0>; + system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <830000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&eeprom_wc_n>; + }; + + rtc_isl1208: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + interrupt-names = "irq"; + interrupts-extended = <&gpio0 RK_PD3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&rtcic_int_l>; + }; +}; + +&pinctrl { + eeprom { + eeprom_wc_n: eeprom-wc-n { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rtc { + rtcic_int_l: rtcic-int-l { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + u2_a_vbus_en: u2-a-vbus-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + u3_a_vbus_en: u3-a-vbus-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts new file mode 100644 index 000000000000..3624ebc8a26f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com> + */ + +/dts-v1/; + +#include "rk3566-tinker-board-3.dtsi" + +/ { + model = "Asus Tinker Board 3S"; + compatible = "asus,rk3566-tinker-board-3s", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + }; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts new file mode 100644 index 000000000000..4db00489be40 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-9tripod-x3568-v4.dts @@ -0,0 +1,880 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "9Tripod X3568 v4"; + compatible = "9tripod,x3568-v4", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; + rtc0 = &rtc0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-vol-up { + label = "volume up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <50000>; + }; + + button-vol-down { + label = "volume down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <500000>; + }; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_work: led-0 { + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_en>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + pdm_codec: pdm-codec { + compatible = "dmic-codec"; + num-channels = <2>; + #sound-dai-cells = <0>; + }; + + pdm_sound: pdm-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "microphone"; + + simple-audio-card,cpu { + sound-dai = <&pdm>; + }; + + simple-audio-card,codec { + sound-dai = <&pdm_codec>; + }; + }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <300>; + reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + }; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + pcie30_avdd0v9: regulator-pcie30-avdd0v9 { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: regulator-pcie30-avdd1v8 { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en_pin>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: regulator-vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: regulator-vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&can1 { + assigned-clocks = <&cru CLK_CAN1>; + assigned-clock-rates = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&can1m1_pins>; + status = "okay"; +}; + +/* used for usb_host0_xhci */ +&combphy0 { + status = "okay"; +}; + +/* used for usb_host1_xhci */ +&combphy1 { + status = "okay"; +}; + +/* connected to sata2 */ +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + codec { + rockchip,mic-in-differential; + }; + }; +}; + +&i2c5 { + status = "okay"; + + rtc0: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +/* used for AP6275S Bluetooth Sound */ +&i2s3_2ch { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* Note: The LED polarity is inverted */ + led@2 { + reg = <2>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* Note: The LED polarity is inverted */ + led@2 { + reg = <2>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pin>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pdm { + status = "okay"; +}; + +&pinctrl { + leds { + led_work_en: led_work_en { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable: wifi-enable { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_reset_pin: pcie-reset-pin { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { + rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +/* Required remotectl for IR receiver */ +&pwm7 { + status = "disabled"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +/* used for eMMC */ +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +/* used for microSD (TF) Slot */ +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +/* used for AP6275S WiFi */ +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +/* used for Debug */ +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-0 = <&uart3m1_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-0 = <&uart4m1_xfer>; + status = "okay"; +}; + +/* used for WiFi/BT AP6275S */ +&uart8 { + pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>; + status = "okay"; +}; + +&uart9 { + pinctrl-0 = <&uart9m1_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts new file mode 100644 index 000000000000..12225b631eb6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-easepi-r1.dts @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "LinkEase EasePi R1"; + compatible = "linkease,easepi-r1", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1750>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&status_led_pin>; + + status_led: led-status { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + pcie30_avdd0v9: regulator-pcie30-avdd0v9 { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: regulator-pcie30-avdd1v8 { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + regulator-vdd0v95-25glan { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd0v95_25glan_en>; + regulator-name = "vdd0v95_25glan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_nvme: regulator-vcc3v3-nvme { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_nvme_en>; + regulator-name = "vcc3v3_nvme"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-0 = <ð_phy1_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; + }; +}; + +/* ETH3 */ +&pcie2x1 { + reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +/* ETH2 */ +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +/* M.2 Key for 2280 NVMe */ +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_nvme>; + status = "okay"; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac1 { + eth_phy1_reset_pin: eth-phy1-reset-pin { + rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + status_led_pin: status-led-pin { + rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + nvme { + vcc3v3_nvme_en: vcc3v3-nvme-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie-nic { + vdd0v95_25glan_en: vdd0v95-25glan-en { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +/* OTG Only USB2.0, Only device mode */ +&usb_host0_xhci { + dr_mode = "peripheral"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts index 0f844806ec54..442a2bc43ba8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts @@ -482,6 +482,8 @@ }; &i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; rockchip,trcm-sync-tx-only; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts new file mode 100644 index 000000000000..f16d1c628793 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de> + */ + +/dts-v1/; + +#include "rk3568-qnap-tsx33.dtsi" + +/ { + model = "Qnap TS-233-2G NAS System 2-Bay"; + compatible = "qnap,ts233", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + }; +}; + +/* connected to sata2 */ +&combphy2 { + status = "okay"; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; +}; + +&i2c1 { + /* eeprom for vital-product-data on the backplane */ + eeprom@56 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x56>; + label = "VPD_BP"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; +}; + +&leds { + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "hdd2:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd2_led_pin>; + }; +}; + +&mcu { + compatible = "qnap,ts233-mcu"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@3 { + /* Motorcomm YT8521 phy */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x3>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + hdd2_led_pin: hdd2-led-pin { + rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sata2 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +/* connected to usb_host1_ehci/ohci */ +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* connected to usb_host0_ehci/ohci */ +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +/* right port backside */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +/* left port backside */ +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 6ae4316761c4..d1e3b7e7a280 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -6,10 +6,7 @@ /dts-v1/; -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include "rk3568.dtsi" +#include "rk3568-qnap-tsx33.dtsi" / { model = "Qnap TS-433-4G NAS System 4-Bay"; @@ -17,83 +14,6 @@ aliases { ethernet0 = &gmac0; - mmc0 = &sdhci; - rtc0 = &rtc_rv8263; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <©_button_pin>, <&reset_button_pin>; - pinctrl-names = "default"; - - key-copy { - label = "copy"; - gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_COPY>; - }; - - key-reset { - label = "reset"; - gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; - label = "hdd1:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd1_led_pin>; - }; - - led-1 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; - label = "hdd2:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd2_led_pin>; - }; - - led-2 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; - label = "hdd3:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd3_led_pin>; - }; - - led-3 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_DISK; - gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; - label = "hdd4:green:disk"; - linux,default-trigger = "disk-activity"; - pinctrl-names = "default"; - pinctrl-0 = <&hdd4_led_pin>; - }; - }; - - dc_12v: regulator-dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; }; vcc3v3_pcie: regulator-vcc3v3-pcie { @@ -105,74 +25,6 @@ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; vin-supply = <&dc_12v>; }; - - vcc3v3_sys: regulator-vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_host: regulator-vcc5v0-host { - compatible = "regulator-fixed"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_otg: regulator-vcc5v0-otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_otg_en>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_usb: regulator-vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; -}; - -/* connected to usb_host0_xhci */ -&combphy0 { - status = "okay"; -}; - -/* connected to sata1 */ -&combphy1 { - status = "okay"; }; /* connected to sata2 */ @@ -180,22 +32,6 @@ status = "okay"; }; -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; @@ -212,263 +48,7 @@ status = "okay"; }; -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - system-power-controller; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - wakeup-source; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-name = "vdd_gpu"; - regulator-always-on; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-name = "vdd_npu"; - regulator-initial-mode = <0x2>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-name = "vdda0v9_image"; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-name = "vdda_0v9"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-name = "vdda0v9_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-name = "vccio_acodec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-name = "vcc3v3_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-name = "vcca1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-name = "vcca1v8_image"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-name = "vcc3v3_sd"; - /* - * turning this off, breaks access to both - * PCIe controllers, refclk generator perhaps - */ - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - }; -}; - &i2c1 { - status = "okay"; - - rtc_rv8263: rtc@51 { - compatible = "microcrystal,rv8263"; - reg = <0x51>; - wakeup-source; - }; - - /* eeprom for vital-product-data on the mainboard */ - eeprom@54 { - compatible = "giantec,gt24c04a", "atmel,24c04"; - reg = <0x54>; - label = "VPD_MB"; - num-addresses = <2>; - pagesize = <16>; - read-only; - }; - /* eeprom for vital-product-data on the backplane */ eeprom@56 { compatible = "giantec,gt24c04a", "atmel,24c04"; @@ -480,6 +60,42 @@ }; }; +&leds { + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "hdd2:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd2_led_pin>; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "hdd3:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd3_led_pin>; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "hdd4:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd4_led_pin>; + }; +}; + +&mcu { + compatible = "qnap,ts433-mcu"; +}; + &mdio0 { rgmii_phy0: ethernet-phy@3 { /* Motorcomm YT8521 phy */ @@ -492,54 +108,6 @@ }; }; -/* - * The MCU can provide system temperature too, but only by polling and of - * course also cannot set trip points. So attach to the cpu thermal-zone - * instead to control the fan. - */ -&cpu_thermal { - trips { - case_fan0: case-fan0 { - hysteresis = <2000>; - temperature = <35000>; - type = "active"; - }; - - case_fan1: case-fan1 { - hysteresis = <2000>; - temperature = <45000>; - type = "active"; - }; - - case_fan2: case-fan2 { - hysteresis = <2000>; - temperature = <65000>; - type = "active"; - }; - }; - - cooling-maps { - /* - * Always provide some air movement, due to small case - * full of harddrives. - */ - map1 { - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - trip = <&case_fan0>; - }; - - map2 { - cooling-device = <&fan 2 3>; - trip = <&case_fan1>; - }; - - map3 { - cooling-device = <&fan 4 THERMAL_NO_LIMIT>; - trip = <&case_fan2>; - }; - }; -}; - &pcie30phy { data-lanes = <1 2>; status = "okay"; @@ -567,21 +135,7 @@ }; }; - keys { - copy_button_pin: copy-button-pin { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - reset_button_pin: reset-button-pin { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - leds { - hdd1_led_pin: hdd1-led-pin { - rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - hdd2_led_pin: hdd2-led-pin { rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; @@ -594,90 +148,12 @@ rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_otg_en: vcc5v0-otg-en { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - vccio4-supply = <&vcc_1v8>; - vccio6-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sata1 { - status = "okay"; }; &sata2 { status = "okay"; }; -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -/* - * Connected to an MCU, that provides access to more LEDs, - * buzzer, fan control and more. - */ -&uart0 { - status = "okay"; - - mcu { - compatible = "qnap,ts433-mcu"; - - fan: fan-0 { - #cooling-cells = <2>; - cooling-levels = <0 64 89 128 166 204 221 238>; - }; - }; -}; - -/* - * Pins available on CN3 connector at TTL voltage level (3V3). - * ,_ _. - * |1234| 1=TX 2=VCC - * `----' 3=RX 4=GND - */ -&uart2 { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -/* connected to usb_host0_xhci */ -&usb2phy0_otg { - phy-supply = <&vcc5v0_otg>; - status = "okay"; -}; - &usb2phy1 { status = "okay"; }; @@ -703,12 +179,6 @@ status = "okay"; }; -/* front port */ -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - /* left port backside */ &usb_host1_ehci { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi new file mode 100644 index 000000000000..f009275c72c8 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi @@ -0,0 +1,608 @@ +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include "rk3568.dtsi" + +/ { + aliases { + mmc0 = &sdhci; + rtc0 = &rtc_rv8263; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <©_button_pin>, <&reset_button_pin>; + pinctrl-names = "default"; + + key-copy { + label = "copy"; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_COPY>; + }; + + key-reset { + label = "reset"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + label = "hdd1:green:disk"; + linux,default-trigger = "disk-activity"; + pinctrl-names = "default"; + pinctrl-0 = <&hdd1_led_pin>; + }; + }; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_otg: regulator-vcc5v0-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_otg_en>; + regulator-name = "vcc5v0_otg"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: regulator-vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; +}; + +/* connected to usb_host0_xhci */ +&combphy0 { + status = "okay"; +}; + +/* connected to sata1 */ +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +/* + * The MCU can provide system temperature too, but only by polling and of + * course also cannot set trip points. So attach to the cpu thermal-zone + * instead to control the fan. + */ +&cpu_thermal { + trips { + case_fan0: case-fan0 { + hysteresis = <2000>; + temperature = <35000>; + type = "active"; + }; + + case_fan1: case-fan1 { + hysteresis = <2000>; + temperature = <45000>; + type = "active"; + }; + + case_fan2: case-fan2 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + /* + * Always provide some air movement, due to small case + * full of harddrives. + */ + map1 { + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + trip = <&case_fan0>; + }; + + map2 { + cooling-device = <&fan 2 3>; + trip = <&case_fan1>; + }; + + map3 { + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + trip = <&case_fan2>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + /* + * turning this off, breaks access to both + * PCIe controllers, refclk generator perhaps + */ + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&i2c1 { + status = "okay"; + + rtc_rv8263: rtc@51 { + compatible = "microcrystal,rv8263"; + reg = <0x51>; + wakeup-source; + }; + + /* eeprom for vital-product-data on the mainboard */ + eeprom@54 { + compatible = "giantec,gt24c04a", "atmel,24c04"; + reg = <0x54>; + label = "VPD_MB"; + num-addresses = <2>; + pagesize = <16>; + read-only; + }; +}; + +&pinctrl { + keys { + copy_button_pin: copy-button-pin { + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + reset_button_pin: reset-button-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + hdd1_led_pin: hdd1-led-pin { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + vccio4-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +/* + * Connected to an MCU, that provides access to more LEDs, + * buzzer, fan control and more. + */ +&uart0 { + status = "okay"; + + mcu: mcu { + fan: fan-0 { + #cooling-cells = <2>; + cooling-levels = <0 64 89 128 166 204 221 238>; + }; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + serial-number@0 { + reg = <0x0 0x13>; + }; + + ext-port@22 { + reg = <0x22 0x2>; + }; + + mac0: mac@24 { + compatible = "mac-base"; + reg = <0x24 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac1: mac@35 { + compatible = "mac-base"; + reg = <0x35 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac2: mac@46 { + compatible = "mac-base"; + reg = <0x46 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac3: mac@57 { + compatible = "mac-base"; + reg = <0x57 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac4: mac@68 { + compatible = "mac-base"; + reg = <0x68 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac5: mac@79 { + compatible = "mac-base"; + reg = <0x79 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac6: mac@8a { + compatible = "mac-base"; + reg = <0x8a 0x11>; + #nvmem-cell-cells = <1>; + }; + + mac7: mac@9b { + compatible = "mac-base"; + reg = <0x9b 0x11>; + #nvmem-cell-cells = <1>; + }; + }; + }; +}; + +/* + * Pins available on CN3 connector at TTL voltage level (3V3). + * ,_ _. + * |1234| 1=TX 2=VCC + * `----' 3=RX 4=GND + */ +&uart2 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +/* connected to usb_host0_xhci */ +&usb2phy0_otg { + phy-supply = <&vcc5v0_otg>; + status = "okay"; +}; + +/* front port */ +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi index fd2214b6fad4..8893b7b6cc9f 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi @@ -53,7 +53,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; - clocks = <&scmi_clk 0>; + clocks = <&scmi_clk SCMI_CLK_CPU>; #cooling-cells = <2>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -69,6 +69,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&scmi_clk SCMI_CLK_CPU>; #cooling-cells = <2>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -84,6 +85,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&scmi_clk SCMI_CLK_CPU>; #cooling-cells = <2>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -99,6 +101,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&scmi_clk SCMI_CLK_CPU>; #cooling-cells = <2>; enable-method = "psci"; i-cache-size = <0x8000>; @@ -557,7 +560,7 @@ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "job", "mmu", "gpu"; - clocks = <&scmi_clk 1>, <&cru CLK_GPU>; + clocks = <&scmi_clk SCMI_CLK_GPU>, <&cru CLK_GPU>; clock-names = "gpu", "bus"; #cooling-cells = <2>; power-domains = <&power RK3568_PD_GPU>; @@ -616,6 +619,50 @@ #iommu-cells = <0>; }; + vicap: video-capture@fdfe0000 { + compatible = "rockchip,rk3568-vicap"; + reg = <0x0 0xfdfe0000 0x0 0x200>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru DCLK_VICAP>; + assigned-clock-rates = <300000000>; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>, + <&cru DCLK_VICAP>, <&cru ICLK_VICAP_G>; + clock-names = "aclk", "hclk", "dclk", "iclk"; + iommus = <&vicap_mmu>; + power-domains = <&power RK3568_PD_VI>; + resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>, + <&cru SRST_D_VICAP>, <&cru SRST_P_VICAP>, + <&cru SRST_I_VICAP>; + reset-names = "arst", "hrst", "drst", "prst", "irst"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + vicap_dvp: port@0 { + reg = <0>; + }; + + vicap_mipi: port@1 { + reg = <1>; + }; + }; + }; + + vicap_mmu: iommu@fdfe0800 { + compatible = "rockchip,rk3568-iommu"; + reg = <0x0 0xfdfe0800 0x0 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3568_PD_VI>; + rockchip,disable-mmu-reset; + status = "disabled"; + }; + sdmmc2: mmc@fe000000 { compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe000000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts new file mode 100644 index 000000000000..b19f9b6be6bf --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts @@ -0,0 +1,838 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2025 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3576.dtsi" + +/ { + model = "100ASK DshanPi A1 board"; + compatible = "100ask,dshanpi-a1", "rockchip,rk3576"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + es8388_sound: es8388-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "On-board Analog ES8388"; + simple-audio-card,widgets = "Microphone", "Headphone Mic", + "Microphone", "Mic Pads", + "Headphone", "Headphone", + "Line Out", "Line Out"; + simple-audio-card,routing = "Headphone", "LOUT1", + "Headphone", "ROUT1", + "Line Out", "LOUT2", + "Line Out", "ROUT2", + "RINPUT1", "Headphone Mic", + "LINPUT2", "Mic Pads", + "RINPUT2", "Mic Pads"; + simple-audio-card,pin-switches = "Headphone", "Line Out"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "MASKROM"; + linux,code = <KEY_SETUP>; + press-threshold-microvolt = <0>; + }; + }; + + keys-1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "RECOVERY"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + keys-2 { + compatible = "adc-keys"; + io-channels = <&saradc 4>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-user2 { + label = "USER2"; + linux,code = <BTN_2>; + press-threshold-microvolt = <0>; + }; + }; + + keys-3 { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_a0_d>; + + button-user1 { + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + wakeup-source; + }; + }; + + vcc_in: regulator-vcc-12v0-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc_in"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_1v8_s0: regulator-vcc-1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_3v3_m2: regulator-vcc-3v3-m2 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_m2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v0_sys>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_5v0_sys: regulator-vcc-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_in>; + }; + + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren_h>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy0>; + phy-supply = <&vcc_3v3_s0>; + pinctrl-names = "default"; + pinctrl-0 = <ð0m0_miim + ð0m0_tx_bus2 + ð0m0_rx_bus2 + ð0m0_rgmii_clk + ð0m0_rgmii_bus>; + status = "okay"; +}; + +&gmac1 { + clock_in_out = "output"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy1>; + phy-supply = <&vcc_3v3_s0>; + pinctrl-names = "default"; + pinctrl-0 = <ð1m0_miim + ð1m0_tx_bus2 + ð1m0_rx_bus2 + ð1m0_rgmii_clk + ð1m0_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins + &rk806_dvs1_null + &rk806_dvs2_null + &rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc_5v0_sys>; + vcc2-supply = <&vcc_5v0_sys>; + vcc3-supply = <&vcc_5v0_sys>; + vcc4-supply = <&vcc_5v0_sys>; + vcc5-supply = <&vcc_5v0_sys>; + vcc6-supply = <&vcc_5v0_sys>; + vcc7-supply = <&vcc_5v0_sys>; + vcc8-supply = <&vcc_5v0_sys>; + vcc9-supply = <&vcc_5v0_sys>; + vcc10-supply = <&vcc_5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc_5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc_5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_big_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&i2c4 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x11>; + clocks = <&cru CLK_SAI2_MCLKOUT_TO_IO>; + assigned-clocks = <&cru CLK_SAI2_MCLKOUT_TO_IO>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&vcc_3v3_s0>; + DVDD-supply = <&vcc_3v3_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + pinctrl-names = "default"; + pinctrl-0 = <&sai2m0_mclk>; + #sound-dai-cells = <0>; + }; +}; + +&mdio0 { + rgmii_phy0: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + rgmii_phy1: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset>; + reset-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_m2>; + status = "okay"; +}; + +&pinctrl { + gmac { + gmac0_rst: gmac0-rst { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + gmac1_rst: gmac1-rst { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-keys { + gpio0_a0_d: gpio0-a0-d { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_reset: pcie-reset { + rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + typec5v_pwren_h: typec5v-pwren-h { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sai6 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_pldo2_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + full-pwr-cycle-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s0>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vbus5v0_typec>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + phy-supply = <&vcc_5v0_sys>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + status = "okay"; +}; + +&usb_drd1_dwc3 { + dr_mode = "host"; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts new file mode 100644 index 000000000000..31fbefaeceab --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts @@ -0,0 +1,860 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2025 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> + +#include "rk3576.dtsi" + +/ { + model = "FriendlyElec NanoPi R76S"; + compatible = "friendlyarm,nanopi-r76s", "rockchip,rk3576"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&user_but_pin>; + + button-reset { + label = "reset"; + gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; + linux,code = <KEY_RESTART>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led1_h>, <&led_sys_h>, <&led2_h>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + }; + }; + + hdmi-con { + compatible = "hdmi-connector"; + hdmi-pwr-supply = <&vcc5v_hdmi_tx>; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_rtc_s5"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc5v_dcin: regulator-vcc5v-dcin { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v_dcin"; + }; + + vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_tx_on_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v_hdmi_tx"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc5v0_device_s0: regulator-vcc5v0-device-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_device_s0"; + vin-supply = <&vcc5v_dcin>; + }; + + vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys_s5"; + vin-supply = <&vcc5v_dcin>; + }; + + vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg0_pwren_h>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_usb_otg0"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vcc_1v1_nldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_1v8_s0: regulator-vcc-1v8-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + vin-supply = <&vcc_1v8_s3>; + }; + + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-name = "vcc_2v0_pldo_s3"; + vin-supply = <&vcc5v0_sys_s5>; + }; + + vcc_3v3_s0: regulator-vcc-3v3-s0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s0"; + vin-supply = <&vcc_3v3_s3>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gpu { + mali-supply = <&vdd_gpu_s0>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&hdptxphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + pmic@23 { + compatible = "rockchip,rk806"; + reg = <0x23>; + #gpio-cells = <2>; + gpio-controller; + interrupt-parent = <&gpio0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + + vcc1-supply = <&vcc5v0_sys_s5>; + vcc2-supply = <&vcc5v0_sys_s5>; + vcc3-supply = <&vcc5v0_sys_s5>; + vcc4-supply = <&vcc5v0_sys_s5>; + vcc5-supply = <&vcc5v0_sys_s5>; + vcc6-supply = <&vcc5v0_sys_s5>; + vcc7-supply = <&vcc5v0_sys_s5>; + vcc8-supply = <&vcc5v0_sys_s5>; + vcc9-supply = <&vcc5v0_sys_s5>; + vcc10-supply = <&vcc5v0_sys_s5>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys_s5>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys_s5>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun0"; + }; + + rk806_dvs1_pwrdn: dvs1-pwrdn-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun2"; + }; + + rk806_dvs1_rst: dvs1-rst-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun3"; + }; + + rk806_dvs1_slp: dvs1-slp-pins { + pins = "gpio_pwrctrl1"; + function = "pin_fun1"; + }; + + rk806_dvs2_dvs: dvs2-dvs-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun4"; + }; + + rk806_dvs2_gpio: dvs2-gpio-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun5"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_pwrdn: dvs2-pwrdn-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun2"; + }; + + rk806_dvs2_rst: dvs2-rst-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun3"; + }; + + rk806_dvs2_slp: dvs2-slp-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun1"; + }; + + rk806_dvs3_dvs: dvs3-dvs-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun4"; + }; + + rk806_dvs3_gpio: dvs3-gpio-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun5"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + rk806_dvs3_pwrdn: dvs3-pwrdn-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun2"; + }; + + rk806_dvs3_rst: dvs3-rst-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun3"; + }; + + rk806_dvs3_slp: dvs3-slp-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun1"; + }; + + regulators { + vdd_cpu_big_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_big_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_npu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd_cpu_lit_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vcc_3v3_s3: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_gpu_s0: dcdc-reg5 { + regulator-boot-on; + regulator-enable-ramp-delay = <400>; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd_gpu_s0"; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vddq_ddr_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_logic_s0: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-name = "vdd_logic_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo2_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdda_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v75_hdmi_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <837500>; + regulator-max-microvolt = <837500>; + regulator-name = "vdda0v75_hdmi_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdda_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdda_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; + wakeup-source; + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_perstn>; + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_perstn>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + bt_wake_host_h: bt-wake-host-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt_h: host-wake-bt-h { + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-keys { + user_but_pin: user-but-pin { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + led_sys_h: led-sys-h { + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led1_h: led1-h { + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led2_h: led2-h { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_tx_on_h: hdmi-tx-on-h { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hym8563 { + rtc_int_l: rtc-int-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie0_perstn: pcie0-perstn { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie1_perstn: pcie1-perstn { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + usb_otg0_pwren_h: usb-otg0-pwren-h { + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_wake_host_h: wifi-wake-host-h { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sai6 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-mmc; + no-sdio; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + wakeup-source; + status = "okay"; + + rtl8822cs: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wake_host_h>; + }; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + full-pwr-cycle-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8_s0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + phy-supply = <&vcc5v0_usb_otg0>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5m0_xfer &uart5m0_ctsn &uart5m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_wake_host_h &host_wake_bt_h &bt_reg_on_h>; + }; +}; + +&usbdp_phy { + status = "okay"; +}; + +&usb_drd0_dwc3 { + dr_mode = "host"; + extcon = <&u2phy0>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts index 9bc33422ced5..7023dc326d0e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts +++ b/arch/arm64/boot/dts/rockchip/rk3576-rock-4d.dts @@ -52,9 +52,9 @@ power-led { color = <LED_COLOR_ID_GREEN>; + default-state = "on"; function = LED_FUNCTION_STATUS; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; }; user-led { diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi index fc4e9e07f1cf..a86fc6b4e8c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi @@ -276,12 +276,6 @@ opp-microvolt = <900000 900000 950000>; clock-latency-ns = <40000>; }; - - opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-microvolt = <950000 950000 950000>; - clock-latency-ns = <40000>; - }; }; cluster1_opp_table: opp-table-cluster1 { @@ -348,12 +342,6 @@ opp-microvolt = <925000 925000 950000>; clock-latency-ns = <40000>; }; - - opp-2304000000 { - opp-hz = /bits/ 64 <2304000000>; - opp-microvolt = <950000 950000 950000>; - clock-latency-ns = <40000>; - }; }; gpu_opp_table: opp-table-gpu { @@ -2561,8 +2549,6 @@ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&i2c9m0_xfer>; - resets = <&cru SRST_I2C9>, <&cru SRST_P_I2C9>; - reset-names = "i2c", "apb"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index e2500e31c434..2a7921793020 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -2181,6 +2181,7 @@ <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>, <&cru SRST_T_EMMC>; reset-names = "core", "bus", "axi", "block", "timer"; + supports-cqe; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts index 91fe810d38d8..60ba6ac55b23 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb2-v10.dts @@ -25,6 +25,18 @@ stdout-path = "serial2:1500000n8"; }; + dp-con { + compatible = "dp-connector"; + label = "DP OUT"; + type = "full-size"; + + port { + dp_con_in: endpoint { + remote-endpoint = <&dp0_out_con>; + }; + }; + }; + hdmi-con { compatible = "hdmi-connector"; type = "a"; @@ -106,6 +118,24 @@ }; }; +&dp0 { + pinctrl-0 = <&dp0m0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&dp0_in { + dp0_in_vp2: endpoint { + remote-endpoint = <&vp2_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&dp_con_in>; + }; +}; + &gpu { mali-supply = <&vdd_gpu_s0>; sram-supply = <&vdd_gpu_mem_s0>; @@ -916,6 +946,17 @@ }; &vop { + /* + * If no dedicated PLL was specified, the GPLL would be automatically + * assigned as the PLL source for dclk_vop2. As the frequency of GPLL + * is 1188 MHz, we can only get typical clock frequencies such as + * 74.25MHz, 148.5MHz, 297MHz, 594MHz. + * + * So here we set the parent clock of VP2 to V0PLL so that we can get + * any frequency. + */ + assigned-clocks = <&cru DCLK_VOP2_SRC>; + assigned-clock-parents = <&cru PLL_V0PLL>; status = "okay"; }; @@ -929,3 +970,10 @@ remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp2 { + vp2_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp2>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi index 0f1a77697351..b5d630d2c879 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-opp.dtsi @@ -115,7 +115,7 @@ }; }; - gpu_opp_table: opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-300000000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts index bc8140883de4..172aeabba72a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts @@ -88,8 +88,8 @@ pinctrl-0 = <&led_pins>; power-led1 { + default-state = "on"; gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; }; hdd-led2 { @@ -345,6 +345,10 @@ }; }; +&hdmi1_sound { + status = "okay"; +}; + &hdptxphy1 { status = "okay"; }; @@ -546,6 +550,11 @@ }; }; +/* HDMI1 ("HDMI TX1 8K") audio */ +&i2s6_8ch { + status = "okay"; +}; + &package_thermal { polling-delay = <1000>; @@ -670,6 +679,12 @@ }; }; + mmc { + sdmmc_det_pin: sdmmc-det-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie20x1_2_perstn: pcie20x1-2-perstn { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -795,12 +810,12 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; - max-frequency = <200000000>; no-sdio; no-mmc; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi index 3bbe78810ec6..b3e76ad2d869 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi @@ -331,12 +331,12 @@ data-role = "dual"; /* fusb302 supports PD Rev 2.0 Ver 1.2 */ pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>; - power-role = "sink"; - try-power-role = "sink"; op-sink-microwatt = <1000000>; sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>, <PDO_VAR(5000, 20000, 5000)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; altmodes { displayport { @@ -509,6 +509,12 @@ }; }; + mmc { + sdmmc_det_pin: sdmmc-det-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie2 { pcie2_0_rst: pcie2-0-rst { rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -590,7 +596,6 @@ }; &sdmmc { - max-frequency = <200000000>; no-sdio; no-mmc; bus-width = <4>; @@ -598,6 +603,8 @@ cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts index 5e984a44120e..07a840d9b385 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts @@ -110,6 +110,11 @@ }; }; +&usb_con { + power-role = "dual"; + try-power-role = "sink"; +}; + &usbdp_phy0 { pinctrl-names = "default"; pinctrl-0 = <&usbc_sbu_dc>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 8ef01010d985..da13dafcbc82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -49,6 +49,10 @@ }; }; +&usb_con { + power-role = "sink"; +}; + &usbdp_phy0 { pinctrl-names = "default"; pinctrl-0 = <&usbc_sbu_dc>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts index c1763835f53d..0dd90c744380 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts @@ -130,6 +130,10 @@ }; }; +&usb_con { + power-role = "source"; +}; + &usbdp_phy0 { pinctrl-names = "default"; pinctrl-0 = <&usbc_sbu_dc>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index b44e89e1bb15..365c1d958f2d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -382,14 +382,12 @@ cap-mmc-highspeed; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; mmc-pwrseq = <&emmc_pwrseq>; no-sdio; no-sd; non-removable; pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vcc_1v8_s3>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi index 9884a5df47df..e1e0e3fc0ca7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi @@ -66,7 +66,7 @@ }; }; - gpu_opp_table: opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-300000000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts index 0df3e80f2dd9..f82050597ab3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts @@ -465,7 +465,6 @@ cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; - max-frequency = <150000000>; no-mmc; no-sdio; sd-uhs-sdr104; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts index f5894672fcbd..21eb003198fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts @@ -796,6 +796,10 @@ domain-supply = <&vdd_gpu_s0>; }; +&pd_npu { + domain-supply = <&vdd_npu_s0>; +}; + &pinctrl { audio-amplifier { headphone_amplifier_en: headphone-amplifier-en { @@ -979,6 +983,36 @@ status = "okay"; }; +&rknn_core_0 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_1 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_2 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_mmu_0 { + status = "okay"; +}; + +&rknn_mmu_1 { + status = "okay"; +}; + +&rknn_mmu_2 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_1v8_s0>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 4ec7bc4a9e96..174d299cc6bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -11,6 +11,7 @@ / { model = "Indiedroid Nova"; + chassis-type = "embedded"; compatible = "indiedroid,nova", "rockchip,rk3588s"; adc-keys-0 { @@ -189,6 +190,22 @@ cpu-supply = <&vdd_cpu_big1_s0>; }; +&dp0 { + status = "okay"; +}; + +&dp0_in { + dp0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&usbdp_phy0_dp_in>; + }; +}; + /* * Add labels for each GPIO pin exposed on the 40 pin header. Note that * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by @@ -370,28 +387,36 @@ sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; op-sink-microwatt = <1000000>; + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - usbc0_orien_sw: endpoint { - remote-endpoint = <&usbdp_phy0_orientation_switch>; + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_xhci_hs>; }; }; port@1 { reg = <1>; - usbc0_role_sw: endpoint { - remote-endpoint = <&dwc3_0_role_switch>; + usbc0_ss: endpoint { + remote-endpoint = <&usbdp_phy0_ss_out>; }; }; port@2 { reg = <2>; - dp_altmode_mux: endpoint { - remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_dp_out>; }; }; }; @@ -405,7 +430,7 @@ clock-output-names = "hym8563"; interrupt-parent = <&gpio0>; interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&hym8563_int>; + pinctrl-0 = <&hym8563_int>, <&clk32k_in>; pinctrl-names = "default"; wakeup-source; }; @@ -458,8 +483,11 @@ }; &pcie2x1l2 { - pinctrl-0 = <&rtl8111_perstb>; + pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>, + <&pcie20x1m0_waken>; pinctrl-names = "default"; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc_3v3_s3>; status = "okay"; }; @@ -467,6 +495,10 @@ domain-supply = <&vdd_gpu_s0>; }; +&pd_npu { + domain-supply = <&vdd_npu_s0>; +}; + &pinctrl { bluetooth-pins { bt_reset: bt-reset { @@ -485,12 +517,6 @@ }; }; - ethernet-pins { - rtl8111_perstb: rtl8111-perstb { - rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - hym8563 { hym8563_int: hym8563-int { @@ -499,13 +525,6 @@ }; }; - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - usb-typec { usbc0_int: usbc0-int { rockchip,pins = @@ -517,6 +536,48 @@ <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&rknn_core_0 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_1 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_core_2 { + npu-supply = <&vdd_npu_s0>; + sram-supply = <&vdd_npu_s0>; + status = "okay"; +}; + +&rknn_mmu_0 { + status = "okay"; +}; + +&rknn_mmu_1 { + status = "okay"; +}; + +&rknn_mmu_2 { + status = "okay"; }; &saradc { @@ -524,10 +585,10 @@ status = "okay"; }; -/* HS400 modes seemed to cause io errors. */ &sdhci { bus-width = <8>; - no-mmc-hs400; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; no-sd; no-sdio; non-removable; @@ -537,6 +598,7 @@ }; &sdio { + #address-cells = <1>; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; @@ -548,9 +610,19 @@ no-sd; non-removable; sd-uhs-sdr104; + #size-cells = <0>; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vcc_1v8_s3>; status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + pinctrl-0 = <&wifi_host_wake_irq>; + pinctrl-names = "default"; + }; }; &sdmmc { @@ -896,12 +968,9 @@ status = "okay"; }; -/* DMA seems to interfere with bluetooth device normal operation. */ &uart9 { pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>; pinctrl-names = "default"; - /delete-property/ dma-names; - /delete-property/ dmas; uart-has-rtscts; status = "okay"; @@ -928,9 +997,22 @@ usb-role-switch; status = "okay"; - port { - dwc3_0_role_switch: endpoint { - remote-endpoint = <&usbc0_role_sw>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_host0_xhci_hs: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_host0_xhci_ss: endpoint { + remote-endpoint = <&usbdp_phy0_ss_in>; + }; }; }; }; @@ -959,14 +1041,24 @@ #address-cells = <1>; #size-cells = <0>; - usbdp_phy0_orientation_switch: endpoint@0 { + usbdp_phy0_ss_out: endpoint@0 { reg = <0>; - remote-endpoint = <&usbc0_orien_sw>; + remote-endpoint = <&usbc0_ss>; }; - usbdp_phy0_dp_altmode_mux: endpoint@1 { + usbdp_phy0_ss_in: endpoint@1 { reg = <1>; - remote-endpoint = <&dp_altmode_mux>; + remote-endpoint = <&usb_host0_xhci_ss>; + }; + + usbdp_phy0_dp_in: endpoint@2 { + reg = <2>; + remote-endpoint = <&dp0_out_con>; + }; + + usbdp_phy0_dp_out: endpoint@3 { + reg = <3>; + remote-endpoint = <&usbc0_sbu>; }; }; }; @@ -985,3 +1077,10 @@ remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts index ad6d04793b0a..83b9b6645a1e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -14,8 +14,8 @@ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; regulator-name = "vcc3v3_pcie20"; regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 19a08f7794e6..045a853d39ec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -61,9 +61,9 @@ power-led { color = <LED_COLOR_ID_GREEN>; + default-state = "on"; function = LED_FUNCTION_POWER; gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; }; }; @@ -228,6 +228,13 @@ regulator-off-in-suspend; }; }; + + eeprom: eeprom@50 { + compatible = "belling,bl24c16a", "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + vcc-supply = <&vcc_3v3_pmu>; + }; }; &i2c2 { @@ -249,12 +256,6 @@ regulator-off-in-suspend; }; }; - - eeprom: eeprom@50 { - compatible = "belling,bl24c16a", "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - }; }; &i2c3 { @@ -377,6 +378,12 @@ }; }; + mmc { + sdmmc_det_pin: sdmmc-det-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pow_en: pow-en { rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -436,6 +443,8 @@ max-frequency = <150000000>; no-sdio; no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s0>; vqmmc-supply = <&vccio_sd_s0>; @@ -600,7 +609,7 @@ }; }; - vcc_3v3_s3: dcdc-reg8 { + vcc_3v3_pmu: vcc_3v3_s3: dcdc-reg8 { regulator-name = "vcc_3v3_s3"; regulator-always-on; regulator-boot-on; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts index dd7317bab613..b837c4e08cec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts @@ -473,6 +473,12 @@ }; }; + mmc { + sdmmc_det_pin: sdmmc-det-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie20x1_2_perstn_m0: pcie20x1-2-perstn-m0 { rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -533,9 +539,12 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; no-sdio; no-mmc; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det_pin>; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index d2456d633c39..864ef0a17425 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -184,20 +184,6 @@ | IRQ_TYPE_LEVEL_HIGH)>; }; - pmu_gate: pmu-gate { - compatible = "sprd,sc9860-pmu-gate"; - sprd,syscon = <&pmu_regs>; /* 0x402b0000 */ - clocks = <&ext_26m>; - #clock-cells = <1>; - }; - - pll: pll { - compatible = "sprd,sc9860-pll"; - sprd,syscon = <&ana_regs>; /* 0x40400000 */ - clocks = <&pmu_gate 0>; - #clock-cells = <1>; - }; - ap_clk: clock-controller@20000000 { compatible = "sprd,sc9860-ap-clk"; reg = <0 0x20000000 0 0x400>; @@ -214,19 +200,6 @@ #clock-cells = <1>; }; - apahb_gate: apahb-gate { - compatible = "sprd,sc9860-apahb-gate"; - sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; - - aon_gate: aon-gate { - compatible = "sprd,sc9860-aon-gate"; - sprd,syscon = <&aon_regs>; /* 0x402e0000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; aonsecure_clk: clock-controller@40880000 { compatible = "sprd,sc9860-aonsecure-clk"; @@ -235,13 +208,6 @@ #clock-cells = <1>; }; - agcp_gate: agcp-gate { - compatible = "sprd,sc9860-agcp-gate"; - sprd,syscon = <&agcp_regs>; /* 0x415e0000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; - gpu_clk: clock-controller@60200000 { compatible = "sprd,sc9860-gpu-clk"; reg = <0 0x60200000 0 0x400>; @@ -256,13 +222,6 @@ #clock-cells = <1>; }; - vsp_gate: vsp-gate { - compatible = "sprd,sc9860-vsp-gate"; - sprd,syscon = <&vsp_regs>; /* 0x61100000 */ - clocks = <&vsp_clk 0>; - #clock-cells = <1>; - }; - cam_clk: clock-controller@62000000 { compatible = "sprd,sc9860-cam-clk"; reg = <0 0x62000000 0 0x4000>; @@ -270,13 +229,6 @@ #clock-cells = <1>; }; - cam_gate: cam-gate { - compatible = "sprd,sc9860-cam-gate"; - sprd,syscon = <&cam_regs>; /* 0x62100000 */ - clocks = <&cam_clk 0>; - #clock-cells = <1>; - }; - disp_clk: clock-controller@63000000 { compatible = "sprd,sc9860-disp-clk"; reg = <0 0x63000000 0 0x400>; @@ -284,20 +236,6 @@ #clock-cells = <1>; }; - disp_gate: disp-gate { - compatible = "sprd,sc9860-disp-gate"; - sprd,syscon = <&disp_regs>; /* 0x63100000 */ - clocks = <&disp_clk 0>; - #clock-cells = <1>; - }; - - apapb_gate: apapb-gate { - compatible = "sprd,sc9860-apapb-gate"; - sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */ - clocks = <&ap_clk 0>; - #clock-cells = <1>; - }; - funnel@10001000 { /* SoC Funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index a551e14ce826..2ecaa56001b8 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -18,49 +18,67 @@ #size-cells = <2>; ranges; - ap_ahb_regs: syscon@20210000 { - compatible = "syscon"; + apahb_gate: clock-controller@20210000 { reg = <0 0x20210000 0 0x10000>; + compatible = "sprd,sc9860-apahb-gate"; + clocks = <&aon_prediv 0>; + #clock-cells = <1>; }; - pmu_regs: syscon@402b0000 { - compatible = "syscon"; + pmu_gate: clock-controller@402b0000 { reg = <0 0x402b0000 0 0x10000>; + compatible = "sprd,sc9860-pmu-gate"; + clocks = <&ext_26m>; + #clock-cells = <1>; }; - aon_regs: syscon@402e0000 { - compatible = "syscon"; + aon_gate: clock-controller@402e0000 { reg = <0 0x402e0000 0 0x10000>; + compatible = "sprd,sc9860-aon-gate"; + clocks = <&aon_prediv 0>; + #clock-cells = <1>; }; - ana_regs: syscon@40400000 { - compatible = "syscon"; + pll: clock-controller@40400000 { reg = <0 0x40400000 0 0x10000>; + compatible = "sprd,sc9860-pll"; + clocks = <&pmu_gate 0>; + #clock-cells = <1>; }; - agcp_regs: syscon@415e0000 { - compatible = "syscon"; + agcp_gate: clock-controller@415e0000 { reg = <0 0x415e0000 0 0x1000000>; + compatible = "sprd,sc9860-agcp-gate"; + clocks = <&aon_prediv 0>; + #clock-cells = <1>; }; - vsp_regs: syscon@61100000 { - compatible = "syscon"; + vsp_gate: clock-controller@61100000 { reg = <0 0x61100000 0 0x10000>; + compatible = "sprd,sc9860-vsp-gate"; + clocks = <&vsp_clk 0>; + #clock-cells = <1>; }; - cam_regs: syscon@62100000 { - compatible = "syscon"; + cam_gate: clock-controller@62100000 { reg = <0 0x62100000 0 0x10000>; + compatible = "sprd,sc9860-cam-gate"; + clocks = <&cam_clk 0>; + #clock-cells = <1>; }; - disp_regs: syscon@63100000 { - compatible = "syscon"; + disp_gate: clock-controller@63100000 { reg = <0 0x63100000 0 0x10000>; + compatible = "sprd,sc9860-disp-gate"; + clocks = <&disp_clk 0>; + #clock-cells = <1>; }; - ap_apb_regs: syscon@70b00000 { - compatible = "syscon"; + apapb_gate: clock-controller@70b00000 { reg = <0 0x70b00000 0 0x40000>; + compatible = "sprd,sc9860-apapb-gate"; + clocks = <&ap_clk 0>; + #clock-cells = <1>; }; ap-apb@70000000 { diff --git a/arch/arm64/boot/dts/st/stm32mp211.dtsi b/arch/arm64/boot/dts/st/stm32mp211.dtsi index bf888d60cd4f..cd078a16065e 100644 --- a/arch/arm64/boot/dts/st/stm32mp211.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp211.dtsi @@ -94,18 +94,20 @@ #size-cells = <2>; rifsc: bus@42080000 { - compatible = "simple-bus"; + compatible = "st,stm32mp21-rifsc", "simple-bus"; reg = <0x42080000 0x0 0x1000>; ranges; dma-ranges; #address-cells = <1>; #size-cells = <2>; + #access-controller-cells = <1>; usart2: serial@400e0000 { compatible = "st,stm32h7-uart"; reg = <0x400e0000 0x0 0x400>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ck_flexgen_08>; + access-controllers = <&rifsc 32>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index e0d102eb6176..c34cd33cd855 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -38,6 +38,7 @@ bias-disable; drive-push-pull; slew-rate = <3>; + st,io-sync = "data on both edges"; }; pins2 { pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */ @@ -53,6 +54,7 @@ <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */ <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */ bias-disable; + st,io-sync = "data on both edges"; }; pins4 { pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */ @@ -142,6 +144,7 @@ bias-disable; drive-push-pull; slew-rate = <3>; + st,io-sync = "data on both edges"; }; pins2 { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */ @@ -164,6 +167,7 @@ <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */ <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */ bias-disable; + st,io-sync = "data on both edges"; }; pins5 { pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */ diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts index 6e165073f732..bb6d6393d2e4 100644 --- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts +++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts @@ -266,6 +266,7 @@ &ommanager { memory-region = <&mm_ospi1>; + memory-region-names = "ospi1"; pinctrl-0 = <&ospi_port1_clk_pins_a &ospi_port1_io03_pins_a &ospi_port1_cs0_pins_a>; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 743115b849a7..ba01a929e06f 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -37,6 +37,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb # Boards with AM62Dx SoC dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb +# Boards with AM62Lx SoCs +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb + # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb @@ -116,9 +119,11 @@ dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm-pcie1-ep.dtbo # Boards with J721e SoC k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo +k3-j721e-evm-gesi-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo @@ -137,12 +142,24 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo # Boards with J722s SoC +k3-am67a-kontron-sa67-dtbs := k3-am67a-kontron-sa67-base.dtb \ + k3-am67a-kontron-sa67-rtc-rv8263.dtbo k3-am67a-kontron-sa67-gbe1.dtbo +k3-am67a-kontron-sa67-ads2-dtbs := k3-am67a-kontron-sa67.dtb k3-am67a-kontron-sa67-ads2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-base.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gbe1.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-gpios.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-rtc-rv8263.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am67a-kontron-sa67-ads2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo # Boards with J784s4 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-clover.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am69-aquila-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am69-sk-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb @@ -177,6 +194,17 @@ k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \ k3-am62x-sk-csi2-tevi-ov5640.dtbo k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo +k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-eth-phy.dtbo +k3-am62a7-phyboard-lyra-disable-rtc-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-rtc.dtbo +k3-am62a7-phyboard-lyra-disable-spi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-disable-spi-nor.dtbo +k3-am62a7-phyboard-lyra-gpio-fan-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ + k3-am62x-phyboard-lyra-gpio-fan.dtbo +k3-am62a7-phyboard-lyra-qspi-nor-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \ + k3-am6xx-phycore-qspi-nor.dtbo k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \ k3-am62x-sk-csi2-imx219.dtbo k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \ @@ -216,6 +244,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo +k3-am67a-kontron-sa67-base-gpios-dtbs := \ + k3-am67a-kontron-sa67-base.dtb k3-am67a-kontron-sa67-gpios.dtbo k3-am68-sk-base-board-csi2-dual-imx219-dtbs := k3-am68-sk-base-board.dtb \ k3-j721e-sk-csi2-dual-imx219.dtbo k3-am68-sk-base-board-pcie1-ep-dtbs := k3-am68-sk-base-board.dtb \ @@ -254,11 +284,22 @@ k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \ k3-j784s4-evm-usxgmii-exp1-exp2.dtbo dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am625-beagleplay-csi2-tevi-ov5640.dtb \ + k3-am625-phyboard-lyra-disable-eth-phy.dtb \ + k3-am625-phyboard-lyra-disable-rtc.dtb \ + k3-am625-phyboard-lyra-disable-spi-nor.dtb \ + k3-am625-phyboard-lyra-gpio-fan.dtb \ + k3-am625-phyboard-lyra-qspi-nor.dtb \ k3-am625-sk-csi2-imx219.dtb \ k3-am625-sk-csi2-ov5640.dtb \ k3-am625-sk-csi2-tevi-ov5640.dtb \ k3-am625-sk-hdmi-audio.dtb \ k3-am62-lp-sk-hdmi-audio.dtb \ + k3-am62-lp-sk-nand.dtb \ + k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \ + k3-am62a7-phyboard-lyra-disable-rtc.dtb \ + k3-am62a7-phyboard-lyra-disable-spi-nor.dtb \ + k3-am62a7-phyboard-lyra-gpio-fan.dtb \ + k3-am62a7-phyboard-lyra-qspi-nor.dtb \ k3-am62a7-sk-csi2-imx219.dtb \ k3-am62a7-sk-csi2-ov5640.dtb \ k3-am62a7-sk-hdmi-audio.dtb \ @@ -268,8 +309,16 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ k3-am642-evm-icssg1-dualemac.dtb \ k3-am642-evm-icssg1-dualemac-mii.dtb \ k3-am642-evm-pcie0-ep.dtb \ + k3-am642-phyboard-electra-disable-eth-phy.dtb \ + k3-am642-phyboard-electra-disable-rtc.dtb \ + k3-am642-phyboard-electra-disable-spi-nor.dtb \ + k3-am642-phyboard-electra-gpio-fan.dtb \ + k3-am642-phyboard-electra-pcie-usb2.dtb \ + k3-am642-phyboard-electra-peb-c-010.dtb \ + k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtb \ k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ + k3-am67a-kontron-sa67-base-gpios.dtb \ k3-am68-sk-base-board-csi2-dual-imx219.dtb \ k3-am68-sk-base-board-pcie1-ep.dtb \ k3-am69-sk-csi2-dual-imx219.dtb \ diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index ecfba05fe5c2..3e2d8f669535 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -181,6 +181,10 @@ vqmmc-supply = <&vddshv_sdio>; }; +&cpsw3g { + status = "okay"; +}; + &cpsw_port2 { status = "disabled"; }; @@ -276,3 +280,63 @@ &gpmc0 { ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ }; + +&mcu_mcan0 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>; + pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; + status = "okay"; +}; + +&mcu_mcan1 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>; + pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; + status = "okay"; +}; + +&mcu_pmx0 { + mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; + + mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index 40fb3c9e674c..c5ee263d34a6 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -76,6 +76,11 @@ assigned-clock-parents = <&k3_clks 157 18>; #clock-cells = <0>; }; + + dss_oldi_io_ctrl: oldi-io-controller@8600 { + compatible = "ti,am625-dss-oldi-io-ctrl", "syscon"; + reg = <0x8600 0x200>; + }; }; dmss: bus@48000000 { @@ -209,6 +214,16 @@ dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, <&main_pktdma 0x7507 0>; dma-names = "tx", "rx1", "rx2"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + status = "reserved"; /* Reserved for OP-TEE */ + }; }; secure_proxy_sa3: mailbox@43600000 { @@ -723,6 +738,8 @@ dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", "rx"; + status = "disabled"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; @@ -788,6 +805,53 @@ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + oldi-transmitters { + #address-cells = <1>; + #size-cells = <0>; + + oldi0: oldi@0 { + reg = <0>; + clocks = <&k3_clks 186 0>; + clock-names = "serial"; + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + oldi0_port0: port@0 { + reg = <0>; + }; + + oldi0_port1: port@1 { + reg = <1>; + }; + }; + }; + + oldi1: oldi@1 { + reg = <1>; + clocks = <&k3_clks 186 0>; + clock-names = "serial"; + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + oldi1_port0: port@0 { + reg = <0>; + }; + + oldi1_port1: port@1 { + reg = <1>; + }; + }; + }; + }; + dss_ports: ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi index eeca643fedbe..878d267bc663 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi @@ -211,10 +211,11 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>; + status = "okay"; }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; bootph-all; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi index 5c1284b802ad..3d1406acf680 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -74,7 +74,7 @@ /* Verdin ETH_2_RGMII */ &cpsw_port2 { phy-handle = <&cpsw3g_phy1>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi index 71c29eab0eee..844f59f772e1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-ivy.dtsi @@ -268,7 +268,7 @@ /* Verdin ETH_2_RGMII */ &cpsw_port2 { phy-handle = <&cpsw3g_phy1>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index dc4b228a9fd7..2a7242a2fef8 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -845,7 +845,7 @@ /* Verdin ETH_1 (On-module PHY) */ &cpsw_port1 { phy-handle = <&cpsw3g_phy0>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index 59f6dff552ed..b08b7062060c 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -46,6 +46,28 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; + system-idle-states { + system_partial_io: system-partial-io { + compatible = "system-idle-state"; + idle-state-name = "off-wake"; + }; + + system_deep_sleep: system-deep-sleep { + compatible = "system-idle-state"; + idle-state-name = "mem"; + }; + + system_mcu_only: system-mcu-only { + compatible = "system-idle-state"; + idle-state-name = "mem-mcu-active"; + }; + + system_standby: system-standby { + compatible = "system-idle-state"; + idle-state-name = "standby"; + }; + }; + cbass_main: bus@f0000 { bootph-all; compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 7028d9835c4a..c468b9c5fc09 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -590,10 +590,11 @@ <&gbe_pmx_obsclk>; assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>; assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>; + status = "okay"; }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi index fe0b98e1d105..9c8362682645 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi @@ -212,11 +212,11 @@ &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; + status = "okay"; }; &cpsw_port2 { - /* PCB provides an internal delay of 2ns */ - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 829f00adea6e..9e5b75a4e88e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -247,6 +247,16 @@ dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>, <&main_pktdma 0x7507 0>; dma-names = "tx", "rx1", "rx2"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>; + + rng: rng@40910000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x40910000 0x00 0x7d>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + status = "reserved"; /* Reserved for OP-TEE */ + }; }; secure_proxy_sa3: mailbox@43600000 { diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi index b3d012a5a26a..b24a63feeab8 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -192,7 +192,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; bootph-all; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index 4d79b3e9486a..31b2de035f0f 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -46,6 +46,33 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; + system-idle-states { + system_partial_io: system-partial-io { + compatible = "system-idle-state"; + idle-state-name = "off-wake"; + }; + + system_io_ddr: system-io-ddr { + compatible = "system-idle-state"; + idle-state-name = "mem-deep"; + }; + + system_deep_sleep: system-deep-sleep { + compatible = "system-idle-state"; + idle-state-name = "mem"; + }; + + system_mcu_only: system-mcu-only { + compatible = "system-idle-state"; + idle-state-name = "mem-mcu-active"; + }; + + system_standby: system-standby { + compatible = "system-idle-state"; + idle-state-name = "standby"; + }; + }; + cbass_main: bus@f0000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index af591fe6ae4f..e99bdbc2e0cb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -233,6 +233,10 @@ &wkup_uart0 { pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; status = "reserved"; }; @@ -426,6 +430,42 @@ AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ >; }; + + mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; + + mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; }; &mcu_gpio0 { @@ -731,7 +771,7 @@ &cpsw_port1 { status = "okay"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; bootph-all; }; @@ -852,4 +892,33 @@ }; }; +&mcu_mcan0 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>; + pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_mcan1 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>; + pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_uart0 { + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + #include "k3-am62a-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts index 83af889e790a..2b233bc0323d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts @@ -146,6 +146,7 @@ regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_sys>; regulator-boot-on; enable-active-high; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; @@ -165,14 +166,16 @@ }; vddshv_sdio: regulator-6 { + /* output of TLV7103318QDSERQ1 */ compatible = "regulator-gpio"; regulator-name = "vddshv_sdio"; pinctrl-names = "default"; pinctrl-0 = <&vddshv_sdio_pins_default>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v0>; regulator-boot-on; - gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>; + gpios = <&main_gpio0 59 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; bootph-all; @@ -198,7 +201,7 @@ pmic_irq_pins_default: pmic-irq-default-pins { pinctrl-single,pins = < - AM62DX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */ + AM62DX_IOPAD(0x01f4, PIN_INPUT, 7) /* (F17) EXTINTn.GPIO1_31 */ >; }; @@ -211,6 +214,14 @@ >; bootph-all; }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + AM62DX_MCU_IOPAD(0x004c, PIN_INPUT, 0) /* (D13) WKUP_I2C0_SCL */ + AM62DX_MCU_IOPAD(0x0050, PIN_INPUT, 0) /* (E13) WKUP_I2C0_SDA */ + >; + bootph-all; + }; }; /* WKUP UART0 is used for DM firmware logs */ @@ -334,7 +345,7 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < - AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */ + AM62DX_IOPAD(0x00f0, PIN_INPUT, 7) /* (Y21) GPIO0_59 */ >; bootph-all; }; @@ -355,9 +366,6 @@ pinctrl-single,pins = < AM62DX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */ AM62DX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */ - AM62DX_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G19) OSPI0_CSn1 */ - AM62DX_IOPAD(0x0034, PIN_OUTPUT, 0) /* (K20) OSPI0_CSn2 */ - AM62DX_IOPAD(0x0038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */ AM62DX_IOPAD(0x000c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */ AM62DX_IOPAD(0x0010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */ AM62DX_IOPAD(0x0014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */ @@ -461,6 +469,89 @@ status = "okay"; }; +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + tps65224: pmic@48 { + compatible = "ti,tps65224-q1"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + ti,primary-pmic; + + gpio-controller; + #gpio-cells = <2>; + + buck12-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&vcc_3v3_sys>; + + regulators { + buck12: buck12 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + buck3: buck3 { + regulator-name = "dvdd1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + buck4: buck4 { + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + ldo1: ldo1 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + ldo2: ldo2 { + regulator-name = "dvdd3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + + ldo3: ldo3 { + regulator-name = "vddr_core"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + bootph-all; + }; + }; + }; +}; + &sdhci0 { /* eMMC */ non-removable; diff --git a/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi new file mode 100644 index 000000000000..883beb76ba9c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l-main.dtsi @@ -0,0 +1,580 @@ +// SPDX-License-Identifier: GPL-2.0-only or MIT +/* + * Device Tree file for the AM62L main domain peripherals + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4 + */ + +&cbass_main { + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01840000 0x00 0xc0000>, /* GICR */ + <0x01 0x00000000 0x00 0x2000>, /* GICC */ + <0x01 0x00010000 0x00 0x1000>, /* GICH */ + <0x01 0x00020000 0x00 0x2000>; /* GICV */ + ranges; + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + interrupt-controller; + /* + * vcpumntirq: + * virtual CPU interface maintenance interrupt + */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: msi-controller@1820000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 267 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&scmi_pds 34>; + clocks = <&scmi_clk 140>; + clock-names = "gpio"; + ti,ngpio = <126>; + ti,davinci-gpio-unbanked = <0>; + }; + + gpio2: gpio@610000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00610000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 281 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 284 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 285 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 287 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&scmi_pds 35>; + clocks = <&scmi_clk 141>; + clock-names = "gpio"; + ti,ngpio = <79>; + ti,davinci-gpio-unbanked = <0>; + }; + + timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 58>; + clock-names = "fck"; + power-domains = <&scmi_pds 15>; + ti,timer-pwm; + }; + + timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 63>; + clock-names = "fck"; + power-domains = <&scmi_pds 16>; + ti,timer-pwm; + }; + + timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 77>; + clock-names = "fck"; + power-domains = <&scmi_pds 17>; + ti,timer-pwm; + }; + + timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 82>; + clock-names = "fck"; + power-domains = <&scmi_pds 18>; + ti,timer-pwm; + }; + + uart0: serial@2800000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 89>; + clocks = <&scmi_clk 358>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart1: serial@2810000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 77>; + clocks = <&scmi_clk 312>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart2: serial@2820000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 78>; + clocks = <&scmi_clk 314>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart3: serial@2830000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 79>; + clocks = <&scmi_clk 316>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart4: serial@2840000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 80>; + clocks = <&scmi_clk 318>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart5: serial@2850000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 81>; + clocks = <&scmi_clk 320>; + clock-names = "fclk"; + status = "disabled"; + }; + + uart6: serial@2860000 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 82>; + clocks = <&scmi_clk 322>; + clock-names = "fclk"; + status = "disabled"; + }; + + conf: bus@9000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x09000000 0x380000>; + + phy_gmii_sel: phy@1be000 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x1be000 0x8>; + #phy-cells = <1>; + }; + + epwm_tbclk: clock-controller@1e9100 { + compatible = "ti,am62-epwm-tbclk"; + reg = <0x1e9100 0x4>; + #clock-cells = <1>; + }; + }; + + usbss0: dwc3-usb@f900000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f900000 0x00 0x800>, + <0x00 0x0f908000 0x00 0x400>; + clocks = <&scmi_clk 331>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&usb_phy_ctrl 0x0>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&scmi_pds 95>; + ranges; + status = "disabled"; + + usb0: usb@31000000 { + compatible = "snps,dwc3"; + reg = <0x00 0x31000000 0x00 0x50000>; + interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; + }; + }; + + usbss1: dwc3-usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; + clocks = <&scmi_clk 338>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&usb_phy_ctrl 0x4>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&scmi_pds 96>; + ranges; + status = "disabled"; + + usb1: usb@31100000 { + compatible = "snps,dwc3"; + reg = <0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + snps,usb2-gadget-lpm-disable; + snps,usb2-lpm-disable; + }; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x00 0x0fa00000 0x00 0x1000>, + <0x00 0x0fa08000 0x00 0x400>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 26>; + clocks = <&scmi_clk 106>, <&scmi_clk 109>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&scmi_clk 109>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,itap-del-sel-legacy = <0x0>; + status = "disabled"; + }; + + sdhci0: mmc@fa10000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0xfa10000 0x00 0x1000>, + <0x00 0xfa18000 0x00 0x400>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 28>; + clocks = <&scmi_clk 122>, <&scmi_clk 125>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&scmi_clk 125>; + bus-width = <8>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-hs200 = <0x6>; + status = "disabled"; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa20000 0x00 0x1000>, + <0x00 0x0fa28000 0x00 0x400>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 27>; + clocks = <&scmi_clk 114>, <&scmi_clk 117>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&scmi_clk 117>; + bus-width = <4>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,itap-del-sel-legacy = <0x0>; + status = "disabled"; + }; + + i2c0: i2c@20000000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20000000 0x00 0x100>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 53>; + clocks = <&scmi_clk 246>; + clock-names = "fck"; + status = "disabled"; + }; + + i2c1: i2c@20010000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20010000 0x00 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 54>; + clocks = <&scmi_clk 250>; + clock-names = "fck"; + status = "disabled"; + }; + + i2c2: i2c@20020000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20020000 0x00 0x100>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 55>; + clocks = <&scmi_clk 254>; + clock-names = "fck"; + status = "disabled"; + }; + + i2c3: i2c@20030000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x20030000 0x00 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 56>; + clocks = <&scmi_clk 258>; + clock-names = "fck"; + status = "disabled"; + }; + + mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&scmi_pds 47>; + clocks = <&scmi_clk 179>, <&scmi_clk 178>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + mcan1: can@20711000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20711000 0x00 0x200>, + <0x00 0x20718000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&scmi_pds 48>; + clocks = <&scmi_clk 185>, <&scmi_clk 184>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + mcan2: can@20721000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20721000 0x00 0x200>, + <0x00 0x20728000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&scmi_pds 49>; + clocks = <&scmi_clk 191>, <&scmi_clk 190>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 72>; + clocks = <&scmi_clk 299>; + status = "disabled"; + }; + + spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 73>; + clocks = <&scmi_clk 302>; + status = "disabled"; + }; + + spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 74>; + clocks = <&scmi_clk 305>; + status = "disabled"; + }; + + spi3: spi@20130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20130000 0x00 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 75>; + clocks = <&scmi_clk 308>; + status = "disabled"; + }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&scmi_pds 40>; + clocks = <&epwm_tbclk 0>, <&scmi_clk 164>; + clock-names = "tbclk", "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&scmi_pds 41>; + clocks = <&epwm_tbclk 1>, <&scmi_clk 165>; + clock-names = "tbclk", "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&scmi_pds 42>; + clocks = <&epwm_tbclk 2>, <&scmi_clk 166>; + clock-names = "tbclk", "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&scmi_pds 23>; + clocks = <&scmi_clk 99>; + clock-names = "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&scmi_pds 24>; + clocks = <&scmi_clk 100>; + clock-names = "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&scmi_pds 25>; + clocks = <&scmi_clk 101>; + clock-names = "fck"; + #pwm-cells = <3>; + status = "disabled"; + }; + + eqep0: counter@23200000 { + compatible = "ti,am62-eqep"; + reg = <0x00 0x23200000 0x00 0x100>; + power-domains = <&scmi_pds 29>; + clocks = <&scmi_clk 127>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep1: counter@23210000 { + compatible = "ti,am62-eqep"; + reg = <0x00 0x23210000 0x00 0x100>; + power-domains = <&scmi_pds 30>; + clocks = <&scmi_clk 128>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + eqep2: counter@23220000 { + compatible = "ti,am62-eqep"; + reg = <0x00 0x23220000 0x00 0x100>; + power-domains = <&scmi_pds 31>; + clocks = <&scmi_clk 129>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + elm0: ecc@25010000 { + compatible = "ti,am64-elm"; + reg = <0x00 0x25010000 0x00 0x2000>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi_pds 25>; + clocks = <&scmi_clk 102>; + clock-names = "fck"; + status = "disabled"; + }; + + gpmc0: memory-controller@3b000000 { + compatible = "ti,am64-gpmc"; + power-domains = <&scmi_pds 37>; + clocks = <&scmi_clk 149>; + clock-names = "fck"; + reg = <0x00 0x3b000000 0x00 0x400>, + <0x00 0x50000000 0x00 0x8000000>; + reg-names = "cfg", "data"; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <3>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + oc_sram: sram@70800000 { + compatible = "mmio-sram"; + reg = <0x00 0x70800000 0x00 0x10000>; + ranges = <0x00 0x00 0x70800000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x00 0x100>; + bootph-all; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi new file mode 100644 index 000000000000..61bfcdcfc66e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0-only or MIT +/* + * Device Tree file for the AM62L wakeup domain peripherals + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4 + */ + +#include <dt-bindings/bus/ti-sysc.h> + +&cbass_wakeup { + vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&scmi_pds 46>; + #thermal-sensor-cells = <1>; + }; + + pmx0: pinctrl@4084000 { + compatible = "ti,am62l-padconf", "pinctrl-single"; + reg = <0x00 0x4084000 0x00 0x24c>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + #pinctrl-cells = <1>; + }; + + wkup_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x04201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 704 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 705 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 706 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 707 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&scmi_pds 36>; + clocks = <&scmi_clk 146>; + clock-names = "gpio"; + ti,ngpio = <7>; + ti,davinci-gpio-unbanked = <0>; + status = "disabled"; + }; + + wkup_timer0: timer@2b100000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2b100000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 93>; + clock-names = "fck"; + power-domains = <&scmi_pds 19>; + ti,timer-pwm; + }; + + wkup_timer1: timer@2b110000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2b110000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 98>; + clock-names = "fck"; + power-domains = <&scmi_pds 20>; + ti,timer-pwm; + }; + + wkup_i2c0: i2c@2b200000 { + compatible = "ti,am64-i2c", "ti,omap4-i2c"; + reg = <0x00 0x2b200000 0x00 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&scmi_pds 57>; + clocks = <&scmi_clk 262>; + clock-names = "fck"; + status = "disabled"; + }; + + target-module@2b300050 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x00 0x2b300050 0x00 0x4>, + <0x00 0x2b300054 0x00 0x4>, + <0x00 0x2b300058 0x00 0x4>; + reg-names = "rev", "sysc", "syss"; + ranges = <0x00 0x00 0x2b300000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&scmi_pds 83>; + clocks = <&scmi_clk 324>; + clock-names = "fck"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + ti,no-reset-on-init; + status = "disabled"; + + wkup_uart0: serial@0 { + compatible = "ti,am64-uart", "ti,am654-uart"; + reg = <0x00 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 324>; + assigned-clocks = <&scmi_clk 324>; + clock-names = "fclk"; + status = "disabled"; + }; + }; + + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + ranges = <0x00 0x00 0x43000000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + bootph-all; + }; + + cpsw_mac_syscon: ethernet-mac-syscon@2000 { + compatible = "ti,am62p-cpsw-mac-efuse", "syscon"; + reg = <0x2000 0x8>; + }; + + usb_phy_ctrl: syscon@45000 { + compatible = "ti,am62-usb-phy-ctrl", "syscon"; + reg = <0x45000 0x1000>; + bootph-all; + }; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62l.dtsi b/arch/arm64/boot/dts/ti/k3-am62l.dtsi new file mode 100644 index 000000000000..23acdbb301fe --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l.dtsi @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0-only or MIT +/* + * Device Tree Source for AM62L SoC Family + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4 + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "k3-pinctrl.h" + +/ { + model = "Texas Instruments K3 AM62L3 SoC"; + compatible = "ti,am62l3"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x82004000>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + bootph-all; + }; + + scmi_pds: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + bootph-all; + }; + }; + }; + + a53_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: bus@f0000 { + compatible = "simple-bus"; + ranges = <0x00 0x00600000 0x00 0x00600000 0x00 0x00010100>, /* GPIO */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First Peripheral Window */ + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000400>, /* Timesync Router */ + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x09000000 0x00 0x09000000 0x00 0x00400000>, /* CTRL MMRs */ + <0x00 0x0e000000 0x00 0x0e000000 0x00 0x1a001400>, /* Second Peripheral Window */ + <0x00 0x301c0000 0x00 0x301c0000 0x00 0x00001000>, /* DPHY-TX */ + <0x00 0x30200000 0x00 0x30200000 0x00 0x0000b000>, /* DSS */ + <0x00 0x30270000 0x00 0x30270000 0x00 0x00390000>, /* DSI Wrapper */ + <0x00 0x30500000 0x00 0x30500000 0x00 0x00100000>, /* DSI Config */ + <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core Window */ + <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core Window */ + <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0 */ + <0x00 0x45810000 0x00 0x45810000 0x00 0x03170000>, /* DMSS */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC DATA */ + <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS DAT1 */ + <0x00 0x70800000 0x00 0x70800000 0x00 0x00018000>, /* OCSRAM */ + <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */ + <0x04 0x00000000 0x04 0x00000000 0x01 0x00000000>, /* FSS DAT0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS DAT3 */ + + /* Wakeup Domain Range */ + <0x00 0x00a80000 0x00 0x00a80000 0x00 0x00034000>, /* GTC */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00001400>, /* VTM */ + <0x00 0x04080000 0x00 0x04080000 0x00 0x00008000>, /* PDCFG */ + <0x00 0x04201000 0x00 0x04201000 0x00 0x00000100>, /* GPIO */ + <0x00 0x2b100000 0x00 0x2b100000 0x00 0x00100100>, /* Wakeup Peripheral Window */ + <0x00 0x40800000 0x00 0x40800000 0x00 0x00014000>, /* DMA */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00080000>; /* CTRL MMRs */ + #address-cells = <2>; + #size-cells = <2>; + + cbass_wakeup: bus@a80000 { + compatible = "simple-bus"; + ranges = <0x00 0x00a80000 0x00 0x00a80000 0x00 0x00034000>, /* GTC */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00001400>, /* VTM */ + <0x00 0x04080000 0x00 0x04080000 0x00 0x00008000>, /* PDCFG */ + <0x00 0x04201000 0x00 0x04201000 0x00 0x00000100>, /* GPIO */ + <0x00 0x2b100000 0x00 0x2b100000 0x00 0x00100100>, /* Wakeup Peripheral Window */ + <0x00 0x40800000 0x00 0x40800000 0x00 0x00014000>, /* DMA */ + <0x00 0x43000000 0x00 0x43000000 0x00 0x00080000>; /* CTRL MMRs */ + #address-cells = <2>; + #size-cells = <2>; + }; + }; +}; + +/* Now include peripherals for each bus segment */ +#include "k3-am62l-main.dtsi" +#include "k3-am62l-wakeup.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts new file mode 100644 index 000000000000..cae04cce3373 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: GPL-2.0-only or MIT +/* + * Device Tree file for the AM62L3 Evaluation Module + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4 + * Data Sheet: https://www.ti.com/lit/pdf/sprspa1 + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/thermal/thermal.h> +#include "k3-am62l3.dtsi" +#include "k3-pinctrl.h" + +/ { + compatible = "ti,am62l3-evm", "ti,am62l3"; + model = "Texas Instruments AM62L3 Evaluation Module"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-all; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&usr_button_pins_default>; + + usr: button-usr { + label = "User Key"; + linux,code = <BTN_0>; + gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62-sk:green:heartbeat"; + gpios = <&gpio0 123 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "on"; + }; + }; + + thermal-zones { + wkup0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&vtm0 0>; + + trips { + crit0 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3v3_sys: regulator-1 { + /* output of LM61460-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-2 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_1v8: regulator-3 { + /* output of TPS6282518DMQ */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3_sys>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gpio0 { + bootph-all; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + eeprom@51 { + /* AT24C512C-MAHM-T or M24512-DFMC6TG */ + compatible = "atmel,24c512"; + reg = <0x51>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + clock-frequency = <100000>; + status = "okay"; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", "", + "UART1_FET_SEL", "MMC1_SD_EN", + "VPP_LDO_EN", "EXP_PS_3V3_EN", + "UART1_FET_BUF_EN", "", "", + "", "DSI_GPIO0", "DSI_GPIO1", + "", "BT_UART_WAKE_SOC_3V3", + "USB_TYPEA_OC_INDICATION", "", + "", "WLAN_ALERTn", "", "", + "HDMI_INTn", "TEST_GPIO2", + "MCASP0_FET_EN", "MCASP0_BUF_BT_EN", + "MCASP0_FET_SEL", "DSI_EDID", + "PD_I2C_IRQ", "IO_EXP_TEST_LED"; + + interrupt-parent = <&gpio0>; + interrupts = <91 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_ioexp_intr_pins_default>; + bootph-all; + }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "BT_EN_SOC", "VOUT0_FET_SEL0", + "", "", + "", "", + "", "", + "WL_LT_EN", "EXP_PS_5V0_EN", + "TP45", "TP48", + "TP46", "TP49", + "TP47", "TP50", + "GPIO_QSPI_NAND_RSTn", "GPIO_HDMI_RSTn", + "GPIO_CPSW1_RST", "GPIO_CPSW2_RST", + "", "GPIO_AUD_RSTn", + "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST"; + bootph-all; + }; + +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + typec_pd0: tps658x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + + port { + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; +}; + +&pmx0 { + gpio0_ioexp_intr_pins_default: gpio0-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b0, PIN_INPUT, 7) /* (B12) SPI0_D1.GPIO0_91 */ + >; + bootph-all; + }; + + i2c0_pins_default: i2c0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01cc, PIN_INPUT_PULLUP, 0) /* (B7) I2C0_SCL */ + AM62LX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 0) /* (A7) I2C0_SDA */ + >; + bootph-all; + }; + + i2c1_pins_default: i2c1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 0) /* (D7) I2C1_SCL */ + AM62LX_IOPAD(0x01d8, PIN_INPUT_PULLUP, 0) /* (A6) I2C1_SDA */ + >; + bootph-all; + }; + + i2c2_pins_default: i2c2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01dc, PIN_INPUT_PULLUP, 0) /* (B8) I2C2_SCL */ + AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */ + >; + }; + + mmc0_pins_default: mmc0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (D2) MMC0_CMD */ + AM62LX_IOPAD(0x020c, PIN_OUTPUT, 0) /* (B2) MMC0_CLK */ + AM62LX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (D3) MMC0_DAT0 */ + AM62LX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (D4) MMC0_DAT1 */ + AM62LX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (C1) MMC0_DAT2 */ + AM62LX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (C2) MMC0_DAT3 */ + AM62LX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (C4) MMC0_DAT4 */ + AM62LX_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B3) MMC0_DAT5 */ + AM62LX_IOPAD(0x01f0, PIN_INPUT_PULLUP, 0) /* (A3) MMC0_DAT6 */ + AM62LX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B4) MMC0_DAT7 */ + >; + bootph-all; + }; + + mmc1_pins_default: mmc1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0230, PIN_INPUT, 0) /* (Y3) MMC1_CMD */ + AM62LX_IOPAD(0x0228, PIN_OUTPUT, 0) /* (Y2) MMC1_CLK */ + AM62LX_IOPAD(0x0224, PIN_INPUT, 0) /* (AA1) MMC1_DAT0 */ + AM62LX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y4) MMC1_DAT1 */ + AM62LX_IOPAD(0x021c, PIN_INPUT_PULLUP, 0) /* (AA2) MMC1_DAT2 */ + AM62LX_IOPAD(0x0218, PIN_INPUT_PULLUP, 0) /* (AB2) MMC1_DAT3 */ + AM62LX_IOPAD(0x0234, PIN_INPUT, 0) /* (B6) MMC1_SDCD */ + >; + bootph-all; + }; + + uart0_pins_default: uart0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b4, PIN_INPUT, 0) /* (D13) UART0_RXD */ + AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */ + >; + bootph-all; + }; + + usb1_default_pins: usb1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */ + >; + }; + + usr_button_pins_default: usr-button-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01ac, PIN_INPUT, 7) /* (E12) SPI0_D0.GPIO0_90 */ + >; + }; + + usr_led_pins_default: usr-led-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0238, PIN_OUTPUT, 7) /* (D24) MMC1_SDWP.GPIO0_123 */ + >; + }; + +}; + +&sdhci0 { + /* eMMC */ + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + non-removable; + status = "okay"; + bootph-all; +}; + +&sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + vmmc-supply = <&vdd_mmc1>; + disable-wp; + status = "okay"; + bootph-all; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + bootph-all; +}; + +&usbss0 { + status = "okay"; + ti,vbus-divider; +}; + +&usb0 { + usb-role-switch; + + port { + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; +}; + +&usbss1 { + status = "okay"; + ti,vbus-divider; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_default_pins>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi new file mode 100644 index 000000000000..da220b851512 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-only or MIT +/* + * Device Tree file for the AM62L3 SoC family (Dual Core A53) + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/ + * + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4 + */ + +/dts-v1/; + +#include "k3-am62l.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x40000>; + cache-line-size = <64>; + cache-sets = <256>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi index 0c05bcf1d776..3cf7c2b3ce2d 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi @@ -46,6 +46,24 @@ #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x20000>; + audio_refclk0: clock-controller@82e0 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e0 0x4>; + clocks = <&k3_clks 157 0>; + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 16>; + #clock-cells = <0>; + }; + + audio_refclk1: clock-controller@82e4 { + compatible = "ti,am62-audio-refclk"; + reg = <0x82e4 0x4>; + clocks = <&k3_clks 157 18>; + assigned-clocks = <&k3_clks 157 18>; + assigned-clock-parents = <&k3_clks 157 34>; + #clock-cells = <0>; + }; + phy_gmii_sel: phy@4044 { compatible = "ti,am654-phy-gmii-sel"; reg = <0x4044 0x8>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 908cc0760e7d..13d32cbff186 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -42,26 +42,6 @@ ti,interrupt-ranges = <5 69 35>; }; -&main_conf { - audio_refclk0: clock-controller@82e0 { - compatible = "ti,am62-audio-refclk"; - reg = <0x82e0 0x4>; - clocks = <&k3_clks 157 0>; - assigned-clocks = <&k3_clks 157 0>; - assigned-clock-parents = <&k3_clks 157 16>; - #clock-cells = <0>; - }; - - audio_refclk1: clock-controller@82e4 { - compatible = "ti,am62-audio-refclk"; - reg = <0x82e4 0x4>; - clocks = <&k3_clks 157 18>; - assigned-clocks = <&k3_clks 157 18>; - assigned-clock-parents = <&k3_clks 157 34>; - #clock-cells = <0>; - }; -}; - &main_gpio0 { gpio-ranges = <&main_pmx0 0 0 32>, <&main_pmx0 32 33 38>, <&main_pmx0 70 72 22>; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi index 0679d76f31bd..a0d5b15fc147 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-dev.dtsi @@ -78,7 +78,7 @@ /* Verdin ETH_2_RGMII */ &cpsw_port2 { phy-handle = <&carrier_eth_phy>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi index 317c8818f9ee..04f13edcb166 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin-ivy.dtsi @@ -275,7 +275,7 @@ /* Verdin ETH_2_RGMII */ &cpsw_port2 { phy-handle = <&carrier_eth_phy>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi index 99810047614e..5e050cbb9eaf 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi @@ -813,7 +813,7 @@ /* Verdin ETH_1 (On-module PHY) */ &cpsw_port1 { phy-handle = <&som_eth_phy>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi index 75a15c368c11..e2c01328eb29 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi @@ -44,6 +44,33 @@ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; }; + system-idle-states { + system_partial_io: system-partial-io { + compatible = "system-idle-state"; + idle-state-name = "off-wake"; + }; + + system_io_ddr: system-io-ddr { + compatible = "system-idle-state"; + idle-state-name = "mem-deep"; + }; + + system_deep_sleep: system-deep-sleep { + compatible = "system-idle-state"; + idle-state-name = "mem"; + }; + + system_mcu_only: system-mcu-only { + compatible = "system-idle-state"; + idle-state-name = "mem-mcu-active"; + }; + + system_standby: system-standby { + compatible = "system-idle-state"; + idle-state-name = "standby"; + }; + }; + cbass_main: bus@f0000 { compatible = "simple-bus"; #address-cells = <2>; @@ -59,7 +86,7 @@ <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */ - <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */ + <0x00 0x0fd80000 0x00 0x0fd80000 0x00 0x00080000>, /* GPU */ <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */ <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */ <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */ diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index a064a632680e..ef719c6334fc 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -541,14 +541,14 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; bootph-all; }; &cpsw_port2 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; status = "okay"; }; @@ -716,12 +716,52 @@ >; bootph-all; }; + + mcu_mcan0_tx_pins_default: mcu-mcan0-tx-default-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan0_rx_pins_default: mcu-mcan0-rx-default-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-wakeup-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x038, PIN_INPUT | PIN_WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */ + >; + }; + + mcu_mcan1_tx_pins_default: mcu-mcan1-tx-default-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (E5) MCU_MCAN1_TX */ + >; + }; + + mcu_mcan1_rx_pins_default: mcu-mcan1-rx-default-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; + + mcu_mcan1_rx_pins_wakeup: mcu-mcan1-rx-wakeup-pins { + pinctrl-single,pins = < + AM62PX_MCU_IOPAD(0x040, PIN_INPUT | PIN_WKUP_EN, 0) /* (D4) MCU_MCAN1_RX */ + >; + }; }; &wkup_uart0 { /* WKUP UART0 is used by DM firmware */ pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; status = "reserved"; bootph-all; }; @@ -763,4 +803,33 @@ status = "okay"; }; +&mcu_mcan0 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>; + pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_mcan1 { + pinctrl-names = "default", "wakeup"; + pinctrl-0 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_default>; + pinctrl-1 = <&mcu_mcan1_tx_pins_default>, <&mcu_mcan1_rx_pins_wakeup>; + wakeup-source = <&system_partial_io>, + <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + +&mcu_uart0 { + wakeup-source = <&system_io_ddr>, + <&system_deep_sleep>, + <&system_mcu_only>, + <&system_standby>; +}; + #include "k3-am62p-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi index edaa4f99295d..fc5a3942cde0 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi @@ -63,18 +63,6 @@ no-map; }; - mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9b800000 0x00 0x00100000>; - no-map; - }; - - mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9b900000 0x00 0x00f00000>; - no-map; - }; - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 { compatible = "shared-dma-pool"; reg = <0x00 0x9c800000 0x00 0x00100000>; @@ -124,6 +112,38 @@ enable-active-high; regulator-always-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "dsp_b"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "wm8904-audio"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Microphone Jack", + "IN1R", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + }; +}; + +&audio_refclk1 { + assigned-clock-rates = <100000000>; }; &cpsw3g { @@ -161,6 +181,19 @@ pinctrl-0 = <&pinctrl_i2c2>; clock-frequency = <400000>; status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&audio_refclk1>; + clock-names = "mclk"; + AVDD-supply = <®_1v8>; + CPVDD-supply = <®_1v8>; + DBVDD-supply = <®_3v3>; + DCVDD-supply = <®_1v8>; + MICVDD-supply = <®_1v8>; + }; }; &main_i2c3 { @@ -191,6 +224,16 @@ >; }; + pinctrl_mcasp1: main-mcasp1-default-pins { + pinctrl-single,pins = < + AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ + AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */ + AM62PX_IOPAD(0x008c, PIN_OUTPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */ + AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */ + AM62PX_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (P24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + pinctrl_mdio1: main-mdio1-default-pins { pinctrl-single,pins = < AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */ @@ -279,6 +322,30 @@ pinctrl-0 = <&pinctrl_spi0>; ti,pindir-d0-out-d1-in; status = "okay"; + + /* Resistive touch controller */ + ads7846: touchscreen@0 { + compatible = "ti,ads7846"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&main_gpio0>; + interrupts = <48 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <1500000>; + pendown-gpio = <&main_gpio0 48 GPIO_ACTIVE_LOW>; + ti,x-min = /bits/ 16 <125>; + ti,x-max = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + ti,y-max = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + ti,debounce-max = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; }; &main_uart5 { @@ -292,6 +359,23 @@ }; }; +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcasp1>; + op-mode = <0>; /* MCASP_IIS_MODE */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + tx-num-evt = <0>; + rx-num-evt = <0>; + #sound-dai-cells = <0>; + status = "okay"; +}; + &sdhci0 { /* On-module eMMC */ ti,driver-strength-ohm = <50>; @@ -320,44 +404,6 @@ ti,vbus-divider; }; -&mailbox0_cluster0 { - status = "okay"; - - mbox_r5_0: mbox-r5-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; -}; - -&mailbox0_cluster1 { - status = "okay"; - - mbox_mcu_r5_0: mbox-mcu-r5-0 { - ti,mbox-rx = <0 0 0>; - ti,mbox-tx = <1 0 0>; - }; -}; - -&mcu_r5fss0 { - status = "okay"; -}; - -&mcu_r5fss0_core0 { - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>; - memory-region = <&mcu_r5fss0_core0_dma_memory_region>, - <&mcu_r5fss0_core0_memory_region>; -}; - -&wkup_r5fss0 { - status = "okay"; -}; - -&wkup_r5fss0_core0 { - mboxes = <&mailbox0_cluster0 &mbox_r5_0>; - memory-region = <&wkup_r5fss0_core0_dma_memory_region>, - <&wkup_r5fss0_core0_memory_region>; -}; - /* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; @@ -385,3 +431,5 @@ /* Main UART1 is used by TIFS firmware */ status = "reserved"; }; + +#include "k3-am62p-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi index aab74d6019b0..d6e70ee15938 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi @@ -291,7 +291,7 @@ }; &cpsw_port2 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy3>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 58f78c0de292..50ed859ae06c 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -438,7 +438,7 @@ &cpsw_port1 { bootph-all; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index 02ef1dd92eaa..d64fb81b04e2 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -178,7 +178,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; bootph-all; status = "okay"; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 85dcff104936..88093ab74502 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -579,13 +579,13 @@ &cpsw_port1 { bootph-all; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; &cpsw_port2 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy3>; status = "okay"; }; @@ -608,6 +608,9 @@ /* ADC is reserved for R5 usage */ status = "reserved"; + dmas = <&main_bcdma 0 0x440f 0>, <&main_bcdma 0 0x4410 0>; + dma-names = "fifo0", "fifo1"; + adc { ti,adc-channels = <0 1 2 3 4 5 6 7>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 1fb1b91a1bad..34bfa99bd4b8 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -499,13 +499,13 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; &cpsw_port2 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index 8f64d6272b1b..46be6824dd16 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -175,6 +175,7 @@ regulator-max-microvolt = <3300000>; gpio = <&main_gpio1 43 GPIO_ACTIVE_HIGH>; enable-active-high; + bootph-all; }; }; @@ -185,7 +186,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; @@ -260,6 +261,7 @@ "", "", "STATUS_OUT_3", "EN_DIG_OUT_4", /* 32-35 */ "", "", "STATUS_OUT_4", "DIG_IN_1", /* 36-39 */ "DIG_IN_2", "DIG_IN_3", "DIG_IN_4"; /* 40- */ + bootph-all; }; &main_gpio1 { @@ -285,6 +287,7 @@ "", "", "", "", /* 60-63 */ "", "", "", "ADC_INT#", /* 64-67 */ "BG95_PWRKEY", "BG95_RESET"; /* 68- */ + bootph-all; line50-hog { /* See also usb0 */ @@ -334,6 +337,7 @@ &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins>; + bootph-pre-ram; status = "okay"; }; @@ -493,6 +497,11 @@ &serdes_ln_ctrl { idle-states = <AM64_SERDES0_LANE0_USB>; + bootph-all; +}; + +&serdes_refclk { + bootph-all; }; &serdes0 { @@ -500,6 +509,7 @@ reg = <0>; #phy-cells = <0>; resets = <&serdes_wiz0 1>; + bootph-all; cdns,num-lanes = <1>; cdns,phy-type = <PHY_TYPE_USB3>; }; @@ -512,6 +522,7 @@ cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>; disable-wp; no-mmc; + bootph-all; ti,fails-without-test-cd; /* Enabled by overlay */ }; @@ -535,9 +546,11 @@ maximum-speed = "super-speed"; phys = <&serdes0_usb_link>; phy-names = "cdns3,usb3-phy"; + bootph-all; }; &usbss0 { + bootph-all; ti,vbus-divider; }; @@ -625,6 +638,7 @@ /* (P19) GPMC0_CSn2.GPIO0_43 - MMC1_CTRL */ AM64X_IOPAD(0x00b0, PIN_OUTPUT, 7) >; + bootph-all; }; main_gpio1_hog_pins: main-gpio1-hog-pins { @@ -748,6 +762,7 @@ /* (#N/A) MMC1_CLKLB */ AM64X_IOPAD(0x0290, PIN_INPUT, 0) >; + bootph-all; }; main_mmc1_reg_pins: main-mmc1-reg-pins { @@ -755,6 +770,7 @@ /* (C13) SPI0_CS1.GPIO1_43 - MMC1_SD_EN */ AM64X_IOPAD(0x020c, PIN_OUTPUT, 7) >; + bootph-all; }; main_mmc1_wifi_pwrseq_pins: main-mmc1-wifi-pwrseq-pins { @@ -797,6 +813,7 @@ /* (C16) UART0_TXD */ AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) >; + bootph-pre-ram; }; main_uart1_pins: main-uart1-pins { @@ -865,6 +882,7 @@ /* (E19) USB0_DRVVBUS */ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) >; + bootph-all; }; pru_icssg1_mdio_pins: pru-icssg1-mdio-pins { diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi index ff3b2e0b8dd4..dde19d0784e3 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi @@ -17,7 +17,7 @@ device_type = "memory"; /* 1G RAM - default variant */ reg = <0x00000000 0x80000000 0x00000000 0x40000000>; - + bootph-pre-ram; }; reserved_memory: reserved-memory { @@ -54,10 +54,15 @@ }; }; +&fss { + bootph-all; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins>; clock-frequency = <400000>; + bootph-pre-ram; status = "okay"; tmp1075: temperature-sensor@4a { @@ -72,6 +77,7 @@ vcc-supply = <®_1v8>; pagesize = <16>; read-only; + bootph-pre-ram; }; pcf85063: rtc@51 { @@ -89,9 +95,10 @@ }; &ospi0 { - status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ospi0_pins>; + bootph-all; + status = "okay"; flash@0 { compatible = "jedec,spi-nor"; @@ -99,6 +106,7 @@ spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <84000000>; + bootph-all; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; @@ -121,6 +129,7 @@ disable-wp; no-sdio; no-sd; + bootph-all; ti,driver-strength-ohm = <50>; }; @@ -132,6 +141,7 @@ /* (B18) I2C0_SDA */ AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) >; + bootph-pre-ram; }; ospi0_pins: ospi0-pins { @@ -159,6 +169,7 @@ /* (N19) OSPI0_DQS */ AM64X_IOPAD(0x0008, PIN_INPUT, 0) >; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index 42ba3dab2fc1..a9a4e7401a49 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -457,10 +457,6 @@ #size-cells = <0>; }; -&mcu_cpsw { - status = "disabled"; -}; - &sdhci1 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index f6d9a5779918..74439e0c16a5 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -354,6 +354,8 @@ "tx4", "tx5", "tx6", "tx7", "rx"; + status = "disabled"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 0c42c486d83a..46c58162eca0 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -571,6 +571,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -586,7 +587,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts index b697035df04e..5255e04b9ac7 100644 --- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts +++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts @@ -249,7 +249,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso new file mode 100644 index 000000000000..ae5e2b52594b --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-ads2.dtso @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Kontron SMARC-sa67 board on the Kontron Eval Carrier 2.2. + * + * Copyright (c) 2025 Kontron Europe GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include "k3-pinctrl.h" + +&{/} { + pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_fan_pins_default>; + interrupts-extended = <&main_gpio1 7 IRQ_TYPE_EDGE_FALLING>; + #cooling-cells = <2>; + pwms = <&epwm2 1 4000000 0>; + cooling-levels = <1 128 192 255>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out Jack", + "Microphone", "Microphone Jack", + "Line", "Line In Jack"; + simple-audio-card,routing = + "Line Out Jack", "LINEOUTR", + "Line Out Jack", "LINEOUTL", + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN2L", "Microphone Jack", + "IN2R", "Microphone Jack"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + dailink0_master: simple-audio-card,codec { + sound-dai = <&wm8904>; + clocks = <&audio_refclk0>; + }; + }; + + cvcc_1p8v_i2s: regulator-carrier-0 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S0_I2S"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + cvcc_1p8v_s0: regulator-carrier-1 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + cvcc_3p3v_s0: regulator-carrier-2 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&audio_refclk0 { + status = "okay"; +}; + +&epwm2 { + status = "okay"; +}; + +&main_pmx0 { + pwm_fan_pins_default: pwm-fan-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1ec, PIN_OUTPUT, 8) /* (A22) I2C1_SDA.EHRPWM2_B */ + J722S_IOPAD(0x194, PIN_INPUT, 0) /* (A25) MCASP0_AXR3.GPIO1_7 */ + >; + }; +}; + +&mcasp0 { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&mcu_i2c0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wm8904: audio-codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&audio_refclk0>; + clock-names = "mclk"; + AVDD-supply = <&cvcc_1p8v_i2s>; + CPVDD-supply = <&cvcc_1p8v_i2s>; + DBVDD-supply = <&cvcc_1p8v_i2s>; + DCVDD-supply = <&cvcc_1p8v_i2s>; + MICVDD-supply = <&cvcc_1p8v_i2s>; + }; +}; + +&mcu_spi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + vcc-supply = <&cvcc_1p8v_s0>; + }; +}; + +&wkup_i2c0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* SMARC Carrier EEPROM */ + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <&cvcc_3p3v_s0>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts new file mode 100644 index 000000000000..7169d934adac --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-base.dts @@ -0,0 +1,1091 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Kontron SMARC-sAM67 module + * + * Copyright (c) 2025 Kontron Europe GmbH + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include "k3-j722s.dtsi" +#include "k3-serdes.h" + +/ { + compatible = "kontron,sa67", "ti,j722s"; + model = "Kontron SMARC-sAM67"; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart0; + serial2 = &main_uart5; + serial3 = &wkup_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &wkup_rtc0; + }; + + lcd0_backlight: backlight-1 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_backlight_pins_default>; + pwms = <&epwm1 0 50000 0>; + brightness-levels = <0 32 64 96 128 160 192 224 255>; + default-brightness-level = <8>; + enable-gpios = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + lcd1_backlight: backlight-2 { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd1_backlight_pins_default>; + pwms = <&epwm1 1 50000 0>; + brightness-levels = <0 32 64 96 128 160 192 224 255>; + default-brightness-level = <8>; + enable-gpios = <&main_gpio1 18 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + connector-1 { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_connector_pins_default>; + type = "micro"; + id-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>; + vbus-supply = <&vcc_usb0_vbus>; + + port { + usb0_connector: endpoint { + remote-endpoint = <&usb0_hc>; + }; + }; + + }; + + memory@80000000 { + /* Filled in by bootloader */ + reg = <0x00000000 0x00000000 0x00000000 0x00000000>, + <0x00000000 0x00000000 0x00000000 0x00000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x10000000>; + alignment = <0x2000>; + linux,cma-default; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + }; + + vin_5p0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "V_3V0_5V25_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3p3_s5: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vin_5p0>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_1p8_s5: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vin_5p0>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3p3_s0: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3p3_s5>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpios = <&tps652g1 1 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_3p3_sd_s0: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "SDIO_PWR_EN"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_3p3_sd_s0_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_3p3_sd_vio_s0: regulator-6 { + compatible = "regulator-gpio"; + regulator-name = "V_3V3_1V8_SD_S0"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_3p3_sd_vio_s0_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3p3_s0>; + regulator-boot-on; + enable-gpios = <&main_gpio0 7 GPIO_ACTIVE_HIGH>; + gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>; + states = <3300000 0x0>, + <1800000 0x1>; + bootph-all; + }; + + vcc_3p3_cam_s0: regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_CAM_S0"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_3p3_cam_s0_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3p3_s5>; + enable-active-high; + interrupts-extended = <&main_gpio1 30 IRQ_TYPE_EDGE_FALLING>; + bootph-all; + }; + + vcc_1p1_s0: regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V1_S0"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_1p1_s3>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + /* shared with V_0V75_0V85_CORE_S0 */ + gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_0p85_vcore_s0: regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "V_0V75_0V85_CORE_S0"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vin_5p0>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpios = <&tps652g1 4 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vcc_lcd0_panel: regulator-10 { + compatible = "regulator-fixed"; + regulator-name = "LCD0_VDD_EN"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_lcd0_panel_pins_default>; + enable-active-high; + gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>; + }; + + vcc_lcd1_panel: regulator-11 { + compatible = "regulator-fixed"; + regulator-name = "LCD1_VDD_EN"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_lcd1_panel_pins_default>; + enable-active-high; + gpios = <&main_gpio1 19 GPIO_ACTIVE_HIGH>; + }; + + vcc_usb0_vbus: regulator-12 { + compatible = "regulator-fixed"; + regulator-name = "USB0_EN_OC#"; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_usb0_vbus_pins_default>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpios = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + }; +}; + +&audio_refclk0 { + pinctrl-names = "default"; + pinctrl-0 = <&audio_refclk0_pins_default>; + status = "disabled"; +}; + +&audio_refclk1 { + pinctrl-names = "default"; + pinctrl-0 = <&audio_refclk1_pins_default>; + status = "disabled"; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw3g_pins_default>, <&rgmii1_pins_default>, + <&rgmii2_pins_default>; + status = "okay"; +}; + +&cpsw3g_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw3g_mdio_pins_default>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpsw_port1 { + phy-connection-type = "rgmii-id"; + phy-handle = <&phy0>; + nvmem-cells = <&base_mac_address 0>; + nvmem-cell-names = "mac-address"; + status = "okay"; +}; + +&main_gpio0 { + gpio-line-names = + "", "", "", "", "", "", "", "SOC_SDIO_PWR_EN", "VSD_SEL", + "RESET_OUT#", "I2C_MUX_RST#", "SPI_FLASH_CS#", "QPSI_CS0#", + "QSPI_CS1#", "BOOT_SEL1", "BRDCFG0", "BRDCFG1", "BRDCFG2", + "BRDCFG3", "BRDCFG4", "", "BRDREV0", "BRDREV1", "", "", "", "", + "", "", "LCD0_BKLT_EN", "LCD0_VDD_EN", "GBE_INT#", "DSI0_TE", + "CHARGING#", "USB0_OTG_ID", "PMIC_INT#", "RTC_INT#", + "EDP_BRIDGE_EN", "EDP_BRIDGE_IRQ#", "", "CHARGER_PRSNT#", "", + "", "", "", "BOOT_SEL2#", "CAM2_RST#", "CAM2_PWR#", "", + "CAM3_RST#", "CAM3_PWR#", "GPIO0", "GPIO1", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "GPIO10", "GPIO11", + "SLEEP#", "LID#"; + + bootph-all; + status = "okay"; +}; + +&main_gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "GPIO6", "GPIO7", "", "", "", "", + "GPIO8", "GPIO9", "PCIE_A_RST#", "", "BATLOW#", "LCD1_BKLT_EN", + "LCD1_VDD_EN", "", "", "", "", "GPIO2", "GPIO3", "", "", + "GPIO4", "GPIO5", "CAM_S0_FAULT#", "BOOT_SEL0#", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "SDIO_CD#", "", + "USB0_DRVVBUS", "USB1_DRVVBUS"; + + bootph-all; + status = "okay"; +}; + +/* I2C_LOCAL */ +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <100000>; + bootph-all; + status = "okay"; + + tps652g1: pmic@44 { + compatible = "ti,tps652g1"; + reg = <0x44>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LPM_EN#", "EN_3V3_S0", "POWER_BTN#", "CARRIER_STBY#", + "EN_0V75_0V85_VCORE_S0", "PMIC_WAKEUP"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupts-extended = <&main_gpio0 35 IRQ_TYPE_EDGE_FALLING>; + + buck1-supply = <&vin_5p0>; + buck2-supply = <&vin_5p0>; + buck3-supply = <&vin_5p0>; + buck4-supply = <&vin_5p0>; + ldo1-supply = <&vin_5p0>; + ldo2-supply = <&vin_5p0>; + ldo3-supply = <&vin_5p0>; + + bootph-all; + + regulators { + vcc_0p85_s0: buck1 { + regulator-name = "V_0V85_S0"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p1_s3: buck2 { + regulator-name = "V_1V1_S3"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p8_s0: buck3 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p2_s0: buck4 { + regulator-name = "V_1V2_S0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p8_vda_pll_s0: ldo1 { + regulator-name = "V_1V8_VDA_PLL_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p8_s3: ldo2 { + regulator-name = "V_1V8_S3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1p8_ret_s5: ldo3 { + regulator-name = "V_1V8_RET_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + system-controller@4a { + compatible = "kontron,sa67mcu", "kontron,sl28cpld"; + reg = <0x4a>; + #address-cells = <1>; + #size-cells = <0>; + + watchdog@4 { + compatible = "kontron,sa67mcu-wdt", "kontron,sl28cpld-wdt"; + reg = <0x4>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@8 { + compatible = "kontron,sa67mcu-hwmon"; + reg = <0x8>; + }; + }; +}; + +/* I2C_CAM */ +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <100000>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_mux_pins_default>; + + vdd-supply = <&vcc_1p8_s0>; + reset-gpios = <&main_gpio0 10 GPIO_ACTIVE_LOW>; + + i2c_cam0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_cam1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_cam2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_cam3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +/* I2C_LCD */ +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_pmx0 { + audio_refclk0_pins_default: audio-refclk0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0c4, PIN_OUTPUT, 5) /* (W23) VOUT0_DATA3.AUDIO_EXT_REFCLK0 */ + >; + }; + + audio_refclk1_pins_default: audio-refclk1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ + >; + }; + + cpsw3g_mdio_pins_default: cpsw3g-mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x15c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + cpsw3g_pins_default: cpsw3g-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1b8, PIN_OUTPUT, 1) /* (C20) SPI0_CS1.CP_GEMAC_CPTS0_TS_COMP */ + >; + }; + + edp_bridge_pins_default: edp-bridge-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x098, PIN_OUTPUT, 7) /* (V21) GPMC0_WAIT0.GPIO0_37 */ + J722S_IOPAD(0x09c, PIN_INPUT, 7) /* (W26) GPMC0_WAIT1.GPIO0_38 */ + >; + }; + + i2c_mux_pins_default: i2c-mux-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x028, PIN_OUTPUT, 7) /* (M27) OSPI0_D7.GPIO0_10 */ + >; + }; + + lcd0_backlight_pins_default: lcd0-backlight-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x074, PIN_OUTPUT, 7) /* (V22) GPMC0_AD14.GPIO0_29 */ + J722S_IOPAD(0x110, PIN_OUTPUT, 4) /* (G27) MMC2_DAT1.EHRPWM1_A */ + >; + }; + + lcd1_backlight_pins_default: lcd1-backlight-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1c0, PIN_OUTPUT, 7) /* (E19) SPI0_D0.GPIO1_18 */ + J722S_IOPAD(0x114, PIN_OUTPUT, 4) /* (G26) MMC2_DAT0.EHRPWM1_B */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1e0, PIN_INPUT, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x1e4, PIN_INPUT, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0b0, PIN_INPUT, 1) /* (P22) GPMC0_CSn2.I2C2_SCL */ + J722S_IOPAD(0x0b4, PIN_INPUT, 1) /* (P23) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_i2c3_pins_default: main-i2c3-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1d0, PIN_INPUT, 2) /* (E22) UART0_CTSn.I2C3_SCL */ + J722S_IOPAD(0x1d4, PIN_INPUT, 2) /* (B21) UART0_RTSn.I2C3_SDA */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0a8, PIN_INPUT, 1) /* (R27) GPMC0_CSn0.I2C4_SCL */ + J722S_IOPAD(0x0ac, PIN_INPUT, 1) /* (P21) GPMC0_CSn1.I2C4_SDA */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1c8, PIN_INPUT, 0) /* (F19) UART0_RXD */ + J722S_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (F20) UART0_TXD */ + >; + bootph-all; + }; + + main_uart5_pins_default: main-uart5-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x108, PIN_INPUT, 3) /* (J27) MMC2_DAT3.UART5_RXD */ + J722S_IOPAD(0x10c, PIN_OUTPUT, 3) /* (H27) MMC2_DAT2.UART5_TXD */ + J722S_IOPAD(0x008, PIN_INPUT, 5) /* (L22) OSPI0_DQS.UART5_CTSn */ + J722S_IOPAD(0x004, PIN_OUTPUT, 5) /* (L23) OSPI0_LBCLKO.UART5_RTSn */ + >; + }; + + mcasp0_pins_default: mcasp0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1a4, PIN_INPUT, 0) /* (D25) MCASP0_ACLKX */ + J722S_IOPAD(0x1a8, PIN_INPUT, 0) /* (C26) MCASP0_AFSX */ + J722S_IOPAD(0x1a0, PIN_INPUT, 0) /* (F23) MCASP0_AXR0 */ + J722S_IOPAD(0x19c, PIN_OUTPUT, 0) /* (B25) MCASP0_AXR1 */ + >; + }; + + mcasp2_pins_default: mcasp2-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x070, PIN_INPUT, 3) /* (V24) GPMC0_AD13.MCASP2_ACLKX */ + J722S_IOPAD(0x06c, PIN_INPUT, 3) /* (V26) GPMC0_AD12.MCASP2_AFSX */ + J722S_IOPAD(0x05c, PIN_INPUT, 3) /* (U27) GPMC0_AD8.MCASP2_AXR0 */ + J722S_IOPAD(0x060, PIN_OUTPUT, 3) /* (U26) GPMC0_AD9.MCASP2_AXR1 */ + >; + }; + + oldi0_pins_default: oldi0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x260, PIN_OUTPUT, 0) /* (AF23) OLDI0_A0N */ + J722S_IOPAD(0x25c, PIN_OUTPUT, 0) /* (AG24) OLDI0_A0P */ + J722S_IOPAD(0x268, PIN_OUTPUT, 0) /* (AG22) OLDI0_A1N */ + J722S_IOPAD(0x264, PIN_OUTPUT, 0) /* (AG23) OLDI0_A1P */ + J722S_IOPAD(0x270, PIN_OUTPUT, 0) /* (AB20) OLDI0_A2N */ + J722S_IOPAD(0x26c, PIN_OUTPUT, 0) /* (AB21) OLDI0_A2P */ + J722S_IOPAD(0x278, PIN_OUTPUT, 0) /* (AG20) OLDI0_A3N */ + J722S_IOPAD(0x274, PIN_OUTPUT, 0) /* (AG21) OLDI0_A3P */ + J722S_IOPAD(0x2a0, PIN_OUTPUT, 0) /* (AF21) OLDI0_CLK0N */ + J722S_IOPAD(0x29c, PIN_OUTPUT, 0) /* (AE20) OLDI0_CLK0P */ + >; + }; + + oldi1_pins_default: oldi1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x280, PIN_OUTPUT, 0) /* (AD21) OLDI0_A4N */ + J722S_IOPAD(0x27c, PIN_OUTPUT, 0) /* (AC21) OLDI0_A4P */ + J722S_IOPAD(0x288, PIN_OUTPUT, 0) /* (AF19) OLDI0_A5N */ + J722S_IOPAD(0x284, PIN_OUTPUT, 0) /* (AF18) OLDI0_A5P */ + J722S_IOPAD(0x290, PIN_OUTPUT, 0) /* (AG17) OLDI0_A6N */ + J722S_IOPAD(0x28c, PIN_OUTPUT, 0) /* (AG18) OLDI0_A6P */ + J722S_IOPAD(0x298, PIN_OUTPUT, 0) /* (AB19) OLDI0_A7N */ + J722S_IOPAD(0x294, PIN_OUTPUT, 0) /* (AA20) OLDI0_A7P */ + J722S_IOPAD(0x2a8, PIN_OUTPUT, 0) /* (AD20) OLDI0_CLK1N */ + J722S_IOPAD(0x2a4, PIN_OUTPUT, 0) /* (AE19) OLDI0_CLK1P */ + >; + }; + + ospi0_pins_default: ospi0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */ + J722S_IOPAD(0x02c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */ + J722S_IOPAD(0x030, PIN_OUTPUT, 0) /* (K23) OSPI0_CSn1 */ + J722S_IOPAD(0x034, PIN_OUTPUT, 0) /* (K22) OSPI0_CSn2 */ + J722S_IOPAD(0x00c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */ + J722S_IOPAD(0x010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */ + J722S_IOPAD(0x014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */ + J722S_IOPAD(0x018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */ + >; + bootph-all; + }; + + pcie0_rc_pins_default: pcie0-rc-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x2ac, PIN_OUTPUT, 0) /* (F25) PCIE0_CLKREQn */ + J722S_IOPAD(0x1b4, PIN_OUTPUT, 7) /* (B20) SPI0_CS0.GPIO1_15 */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x090, PIN_INPUT, 7) /* (P27) GPMC0_BE0n_CLE.GPIO0_35 */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x14c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + rgmii2_pins_default: rgmii2-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0f8, PIN_INPUT, 2) /* (AB24) VOUT0_HSYNC.RGMII2_RD0 */ + J722S_IOPAD(0x0fc, PIN_INPUT, 2) /* (AC27) VOUT0_DE.RGMII2_RD1 */ + J722S_IOPAD(0x100, PIN_INPUT, 2) /* (AB23) VOUT0_VSYNC.RGMII2_RD2 */ + J722S_IOPAD(0x104, PIN_INPUT, 2) /* (AC26) VOUT0_PCLK.RGMII2_RD3 */ + J722S_IOPAD(0x0f4, PIN_INPUT, 2) /* (AB27) VOUT0_DATA15.RGMII2_RXC */ + J722S_IOPAD(0x0f0, PIN_INPUT, 2) /* (AB26) VOUT0_DATA14.RGMII2_RX_CTL */ + J722S_IOPAD(0x0e0, PIN_OUTPUT, 2) /* (AA25) VOUT0_DATA10.RGMII2_TD0 */ + J722S_IOPAD(0x0e4, PIN_OUTPUT, 2) /* (AB25) VOUT0_DATA11.RGMII2_TD1 */ + J722S_IOPAD(0x0e8, PIN_OUTPUT, 2) /* (AA23) VOUT0_DATA12.RGMII2_TD2 */ + J722S_IOPAD(0x0ec, PIN_OUTPUT, 2) /* (AA22) VOUT0_DATA13.RGMII2_TD3 */ + J722S_IOPAD(0x0dc, PIN_OUTPUT, 2) /* (AA27) VOUT0_DATA9.RGMII2_TXC */ + J722S_IOPAD(0x0d8, PIN_OUTPUT, 2) /* (AA24) VOUT0_DATA8.RGMII2_TX_CTL */ + >; + }; + + rtc_pins_default: rtc-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x094, PIN_INPUT, 7) /* (P26) GPMC0_BE1n.GPIO0_36 */ + >; + }; + + sdhci1_pins_default: sdhci1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x23c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x22c, PIN_INPUT, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x228, PIN_INPUT, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */ + J722S_IOPAD(0x244, PIN_INPUT, 0) /* (A24) MMC1_SDWP */ + >; + bootph-all; + }; + + usb0_connector_pins_default: usb0-connector-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x08c, PIN_INPUT_PULLUP, 7) /* (N23) GPMC0_WEn.GPIO0_34 */ + >; + }; + + usb1_pins_default: usb1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x258, PIN_OUTPUT, 0) /* (B27) USB1_DRVVBUS */ + >; + }; + + vcc_3p3_sd_s0_pins_default: vcc-3p3-sd-s0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c, PIN_OUTPUT, 7) /* (L21) OSPI0_D4.GPIO0_7 */ + >; + bootph-all; + }; + + vcc_3p3_sd_vio_s0_pins_default: vcc-3p3-sd-vio-s0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x020, PIN_OUTPUT, 7) /* (M26) OSPI0_D5.GPIO0_8 */ + >; + bootph-all; + }; + + vcc_3p3_cam_s0_pins_default: vcc-3p3-cam-s0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1f0, PIN_OUTPUT, 7) /* (A23) EXT_REFCLK1.GPIO1_30 */ + >; + }; + + vcc_lcd0_panel_pins_default: vcc-lcd0-panel-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x078, PIN_OUTPUT, 7) /* (V23) GPMC0_AD15.GPIO0_30 */ + >; + }; + + vcc_lcd1_panel_pins_default: vcc-lcd1-panel-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x1c4, PIN_OUTPUT, 7) /* (E20) SPI0_D1.GPIO1_19 */ + >; + }; + + vcc_usb0_vbus_pins_default: vcc-usb0-vbus-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >; + }; +}; + +/* SER1 */ +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +/* SER2 */ +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart5_pins_default>; + bootph-all; + status = "okay"; +}; + +/* I2S0 */ +&mcasp0 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins_default>; + op-mode = <0>; /* I2S */ + tdm-slots = <2>; + serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; +}; + +/* I2S2 */ +&mcasp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcasp2_pins_default>; + op-mode = <0>; /* I2S */ + tdm-slots = <2>; + serial-dir = <2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0>; +}; + +/* CAN0 */ +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + status = "okay"; +}; + +/* CAN1 */ +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + status = "okay"; +}; + +&mcu_gpio0 { + gpio-line-names = + "", "", "", "", "", "", "", "", "", "", "", /* 10 */ "GPIO12", + "MCU_INT#", "", "", "", "", "", "", "", "", "", "", "GPIO13"; +}; + +/* I2C_GP */ +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <100000>; + status = "okay"; + + /* SMARC Module EEPROM */ + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&vcc_1p8_s0>; + }; +}; + +&mcu_pmx0 { + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x044, PIN_INPUT, 0) /* (B13) MCU_I2C0_SCL */ + J722S_MCU_IOPAD(0x048, PIN_INPUT, 0) /* (E11) MCU_I2C0_SDA */ + >; + }; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */ + J722S_MCU_IOPAD(0x034, PIN_OUTPUT, 0) /* (B2) MCU_MCAN0_TX */ + >; + }; + + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x040, PIN_INPUT, 0) /* (B1) MCU_MCAN1_RX */ + J722S_MCU_IOPAD(0x03c, PIN_OUTPUT, 0) /* (C1) MCU_MCAN1_TX */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x014, PIN_INPUT, 0) /* (B8) MCU_UART0_RXD */ + J722S_MCU_IOPAD(0x018, PIN_OUTPUT, 0) /* (B4) MCU_UART0_TXD */ + J722S_MCU_IOPAD(0x01c, PIN_INPUT, 0) /* (B5) MCU_UART0_CTSn */ + J722S_MCU_IOPAD(0x020, PIN_OUTPUT, 0) /* (C5) MCU_UART0_RTSn */ + >; + bootph-all; + }; + + mcu_spi0_pins_default: mcu-spi0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x008, PIN_OUTPUT, 0) /* (A9) MCU_SPI0_CLK */ + J722S_MCU_IOPAD(0x000, PIN_OUTPUT, 0) /* (C12) MCU_SPI0_CS0 */ + J722S_MCU_IOPAD(0x004, PIN_OUTPUT, 0) /* (A10) MCU_SPI0_CS1 */ + J722S_MCU_IOPAD(0x00c, PIN_INPUT, 0) /* (B12) MCU_SPI0_D0 */ + J722S_MCU_IOPAD(0x010, PIN_OUTPUT, 0) /* (C11) MCU_SPI0_D1 */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B3) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT, 0) /* (B9) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT, 0) /* (D11) WKUP_I2C0_SDA */ + >; + }; +}; + +/* SPI0 */ +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +/* SER0 */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + bootph-all; + status = "okay"; +}; + +/* QSPI0 */ +&ospi0 { + pinctrl-0 = <&ospi0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + m25p,fast-read; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <3>; + vcc-supply = <&vcc_1p8_s0>; + bootph-all; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x400000>; + label = "failsafe bootloader"; + read-only; + }; + }; + + otp-1 { + compatible = "user-otp"; + + nvmem-layout { + compatible = "kontron,sa67-vpd", "kontron,sl28-vpd"; + + serial_number: serial-number { + }; + + base_mac_address: base-mac-address { + #nvmem-cell-cells = <1>; + }; + }; + }; + }; +}; + +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_rc_pins_default>; + + /* + * This is low active, but the driver itself is broken and already + * inverts the logic. + */ + reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>; + phys = <&serdes1_pcie>; + phy-names = "pcie-phy"; + status = "okay"; +}; + +&sdhci0 { + disable-wp; + bootph-all; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +/* SDIO */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci1_pins_default>; + vmmc-supply = <&vcc_3p3_sd_s0>; + vqmmc-supply = <&vcc_3p3_sd_vio_s0>; + bootph-all; + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + ti,fails-without-test-cd; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = <J722S_SERDES0_LANE0_USB>, + <J722S_SERDES1_LANE0_PCIE0_LANE0>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&serdes0 { + serdes0_usb3: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_USB3>; + }; +}; + +&serdes1 { + serdes1_pcie: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&serdes_wiz1 1>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; +}; + +&usb0 { + /* dual role is implemented but not a full featured OTG */ + adp-disable; + hnp-disable; + srp-disable; + dr_mode = "otg"; + usb-role-switch; + role-switch-default-mode = "peripheral"; + status = "okay"; + + port { + usb0_hc: endpoint { + remote-endpoint = <&usb0_connector>; + }; + }; +}; + +&usb0_phy_ctrl { + /* + * Keep this node in the SPL to be able to use the USB controller to + * boot via DFU. + */ + bootph-all; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; + + dr_mode = "host"; + maximum-speed = "super-speed"; + phys = <&serdes0_usb3>; + phy-names = "cdns3,usb3-phy"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +/* I2C_PM */ +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +/* SER3 */ +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + bootph-all; + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso new file mode 100644 index 000000000000..5dfb0b8f10d2 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gbe1.dtso @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Second ethernet port GBE1. + * + * Copyright (c) 2025 Kontron Europe GmbH + */ + +/dts-v1/; +/plugin/; + +&cpsw3g_mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpsw_port2 { + phy-connection-type = "rgmii-id"; + phy-handle = <&phy1>; + nvmem-cells = <&base_mac_address 1>; + nvmem-cell-names = "mac-address"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso new file mode 100644 index 000000000000..a6ae758e0b3a --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-gpios.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * SMARC GPIOs. + * + * Copyright (c) 2025 Kontron Europe GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include "k3-pinctrl.h" + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio0_pins_default>; +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_pins_default>; +}; + +&main_pmx0 { + main_gpio0_pins_default: main-gpio0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0d0, PIN_INPUT, 7) /* (Y26) VOUT0_DATA6.GPIO0_51 */ + J722S_IOPAD(0x0d4, PIN_INPUT, 7) /* (Y27) VOUT0_DATA7.GPIO0_52 */ + J722S_IOPAD(0x118, PIN_INPUT, 7) /* (H26) MMC2_CLK.GPIO0_69 */ + J722S_IOPAD(0x120, PIN_INPUT, 7) /* (F27) MMC2_CMD.GPIO0_70 */ + >; + }; + + main_gpio1_pins_default: main-gpio1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x194, PIN_INPUT, 7) /* (A25) MCASP0_AXR3.GPIO1_7 */ + J722S_IOPAD(0x198, PIN_INPUT, 7) /* (A26) MCASP0_AXR2.GPIO1_8 */ + J722S_IOPAD(0x1ac, PIN_INPUT, 7) /* (C27) MCASP0_AFSR.GPIO1_13 */ + J722S_IOPAD(0x1b0, PIN_INPUT, 7) /* (F24) MCASP0_ACLKR.GPIO1_14 */ + J722S_IOPAD(0x1d8, PIN_INPUT, 7) /* (D22) MCAN0_TX.GPIO1_24 */ + J722S_IOPAD(0x1dc, PIN_INPUT, 7) /* (C22) MCAN0_RX.GPIO1_25 */ + J722S_IOPAD(0x1e8, PIN_INPUT, 7) /* (C24) I2C1_SCL.GPIO1_28 */ + J722S_IOPAD(0x1ec, PIN_INPUT, 7) /* (A22) I2C1_SDA.GPIO1_29 */ + >; + }; +}; + +&mcu_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_gpio0_pins_default>; +}; + +&mcu_pmx0 { + mcu_gpio0_pins_default: mcu-gpio0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x02c, PIN_INPUT, 7) /* (C4) WKUP_UART0_CTSn.MCU_GPIO0_11 */ + J722S_IOPAD(0x084, PIN_INPUT, 7) /* (F12) WKUP_CLKOUT0.MCU_GPIO0_23 */ + >; + }; + +}; diff --git a/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso new file mode 100644 index 000000000000..0a3e9f614c4c --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am67a-kontron-sa67-rtc-rv8263.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Microcrystal RV8263 RTC variant. + * + * Copyright (c) 2025 Kontron Europe GmbH + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + rtc0 = "/bus@f0000/i2c@20000000/rtc@51"; /* &rtc */ + rtc1 = "/bus@f0000/bus@b00000/rtc@2b1f0000"; /* &wkup_rtc0 */ + }; +}; + +&main_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + rtc: rtc@51 { + compatible = "microcrystal,rv8263"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_pins_default>; + interrupts-extended = <&main_gpio0 36 IRQ_TYPE_EDGE_FALLING>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts index 41c8f8526e15..e221ccb30e95 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts @@ -281,7 +281,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; @@ -422,6 +422,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>; + status = "okay"; }; &mcu_i2c1 { diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi index adef02bd8040..0ff511028f81 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi @@ -175,7 +175,7 @@ &main_cpsw_port1 { phy-handle = <&phy1>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; status = "okay"; }; @@ -258,7 +258,7 @@ bootph-pre-ram; }; - pmic@48 { + pmic: pmic@48 { compatible = "ti,tps6594-q1"; reg = <0x48>; system-power-controller; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 75a107456ce1..88f202f266c6 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -692,6 +692,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -705,7 +706,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; bootph-all; }; diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts new file mode 100644 index 000000000000..55fd214a82e4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts @@ -0,0 +1,451 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 + * https://www.toradex.com/products/carrier-board/clover + */ + +/dts-v1/; + +#include <dt-bindings/pwm/pwm.h> +#include "k3-am69-aquila.dtsi" + +/ { + model = "Toradex Aquila AM69 on Clover Board"; + compatible = "toradex,aquila-am69-clover", + "toradex,aquila-am69", + "ti,j784s4"; + + aliases { + eeprom1 = &carrier_eeprom; + }; + + reg_3v3_dp: regulator-3v3-dp { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_21_dp>; + /* Aquila GPIO_21_DP (AQUILA B57) */ + gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "DP_3V3"; + startup-delay-us = <10000>; + }; + + /* Aquila DP_1 */ + dp-connector { + compatible = "dp-connector"; + dp-pwr-supply = <®_3v3_dp>; + label = "Display Port"; + type = "full-size"; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; +}; + +/* On-module ETH_1 MDIO */ +&davinci_mdio { + status = "okay"; +}; + +&dp0_ports { + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +&main0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main0_alert1>; + }; + }; +}; + +&main1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main1_alert1>; + }; + }; +}; + +&main2_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main2_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main2_alert1>; + }; + }; +}; + +&main3_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main3_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main3_alert1>; + }; + }; +}; + +&main4_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main4_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main4_alert1>; + }; + }; +}; + +/* Aquila ETH_2 */ +&main_cpsw0 { + status = "okay"; +}; + +/* Aquila ETH_2 SGMII PHY */ +&main_cpsw0_port8 { + phy-handle = <&cpsw0_port8_phy4>; + status = "okay"; +}; + +/* Aquila ETH_2_XGMII_MDIO */ +&main_cpsw0_mdio { + status = "okay"; + + cpsw0_port8_phy4: ethernet-phy@4 { + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +/* Aquila PWM_1 */ +&main_ehrpwm0 { + status = "okay"; +}; + +/* Aquila PWM_2 */ +&main_ehrpwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_01>, /* Aquila GPIO_01 */ + <&pinctrl_gpio_02>, /* Aquila GPIO_02 */ + <&pinctrl_gpio_03>; /* Aquila GPIO_03 */ +}; + +/* Aquila I2C_6 */ +&main_i2c5 { + status = "okay"; +}; + +/* Aquila CAN_1 */ +&main_mcan10 { + status = "okay"; +}; + +/* Aquila CAN_3 */ +&main_mcan13 { + status = "okay"; +}; + +/* Aquila SD_1 */ +&main_sdhci1 { + status = "okay"; +}; + +/* Aquila SPI_2 */ +&main_spi0 { + status = "okay"; +}; + +/* Aquila SPI_1 */ +&main_spi2 { + pinctrl-0 = <&pinctrl_main_spi2>, + <&pinctrl_main_spi2_cs0>, + <&pinctrl_gpio_05>; + cs-gpios = <0>, <&wkup_gpio0 29 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_06>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <18500000>; + }; +}; + +/* Aquila UART_1 */ +&main_uart4 { + status = "okay"; +}; + +/* Aquila UART_3, used as the Linux console */ +&main_uart8 { + status = "okay"; +}; + +&mcu_cpsw { + status = "okay"; +}; + +/* On-module ETH_1 RGMII */ +&mcu_cpsw_port1 { + status = "okay"; +}; + +/* Aquila I2C_1 */ +&mcu_i2c0 { + clock-frequency = <100000>; + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan: fan { + cooling-levels = <102 179 255>; + #cooling-cells = <2>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* USB-C OTG (TCPC USB PD PHY) */ + tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C OTG"; + power-role = "dual"; + try-power-role = "sink"; + self-powered; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + op-sink-microwatt = <1000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_con_hs: endpoint { + remote-endpoint = <&usb0_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_1_con_ss: endpoint { + remote-endpoint = <&usb0_ss_mux>; + }; + }; + }; + }; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_2 */ +&mcu_i2c1 { + status = "okay"; +}; + +/* Aquila CAN_2 */ +&mcu_mcan0 { + status = "okay"; +}; + +/* Aquila CAN_4 */ +&mcu_mcan1 { + status = "okay"; +}; + +/* Aquila UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +&mhdp { + status = "okay"; +}; + +/* Aquila QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + cdns,read-delay = <0>; + cdns,tchsh-ns = <3>; + cdns,tsd2d-ns = <10>; + cdns,tshsl-ns = <30>; + cdns,tslch-ns = <8>; + }; +}; + +/* Aquila PCIE_1 */ +&pcie0_rc { + status = "okay"; +}; + +/* Aquila PCIE_2 */ +&pcie1_rc { + status = "okay"; +}; + +&serdes2 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; +}; + +&serdes_wiz2 { + status = "okay"; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +/* Aquila ADC_[1-4] */ +&tscadc0 { + status = "okay"; +}; + +&usbss0 { + status = "okay"; +}; + +&usb0ss_mux { + status = "okay"; + + port { + usb0_ss_mux: endpoint { + remote-endpoint = <&usb_1_con_ss>; + }; + }; +}; + +&usb0 { + status = "okay"; + + port { + usb0_hs: endpoint { + remote-endpoint = <&usb_1_con_hs>; + }; + }; +}; + +&wkup0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup0_alert1>; + }; + }; +}; + +&wkup1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup1_alert1>; + }; + }; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_04>; /* Aquila GPIO_04 */ +}; + +/* Aquila UART_2 */ +&wkup_uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts new file mode 100644 index 000000000000..c7ce804eac70 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 + * https://www.toradex.com/products/carrier-board/aquila-development-board-kit + */ + +/dts-v1/; + +#include <dt-bindings/pwm/pwm.h> +#include "k3-am69-aquila.dtsi" + +/ { + model = "Toradex Aquila AM69 on Aquila Development Board"; + compatible = "toradex,aquila-am69-dev", + "toradex,aquila-am69", + "ti,j784s4"; + + aliases { + eeprom1 = &carrier_eeprom; + }; + + reg_1v8_sw: regulator-1v8-sw { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "Carrier_1V8"; + }; + + reg_3v3_dp: regulator-3v3-dp { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_21_dp>; + /* Aquila GPIO_21_DP (AQUILA B57) */ + gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "DP_3V3"; + startup-delay-us = <10000>; + }; + + dp0-connector { + compatible = "dp-connector"; + dp-pwr-supply = <®_3v3_dp>; + label = "Display Port"; + type = "full-size"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "aquila-wm8904"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN1L", "Microphone Jack", + "IN1R", "Digital Mic"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Digital Mic", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&mcasp4>; + }; + }; +}; + +/* Aquila CTRL_PWR_BTN_MICO# */ +&aquila_key_power { + status = "okay"; +}; + +/* Aquila CTRL_WAKE1_MICO# */ +&aquila_key_wake { + status = "okay"; +}; + +/* On-module ETH_1 MDIO */ +&davinci_mdio { + status = "okay"; +}; + +&dp0_ports { + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; +}; + +&dss { + status = "okay"; +}; + +&main0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main0_alert1>; + }; + }; +}; + +&main1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main1_alert1>; + }; + }; +}; + +&main2_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main2_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main2_alert1>; + }; + }; +}; + +&main3_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main3_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main3_alert1>; + }; + }; +}; + +&main4_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&main4_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&main4_alert1>; + }; + }; +}; + +/* Aquila ETH_2 */ +&main_cpsw0 { + status = "okay"; +}; + +/* Aquila ETH_2 SGMII PHY */ +&main_cpsw0_port8 { + phy-handle = <&cpsw0_port8_phy4>; + status = "okay"; +}; + +/* Aquila ETH_2_XGMII_MDIO */ +&main_cpsw0_mdio { + status = "okay"; + + cpsw0_port8_phy4: ethernet-phy@4 { + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth2_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <44 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +/* Aquila PWM_1 */ +&main_ehrpwm0 { + status = "okay"; +}; + +/* Aquila PWM_4_DP */ +&main_ehrpwm2 { + status = "okay"; +}; + +/* Aquila PWM_2 */ +&main_ehrpwm1 { + status = "okay"; +}; + +/* Aquila PWM_3_DSI */ +&main_ehrpwm5 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_01>, /* Aquila GPIO_01 */ + <&pinctrl_gpio_02>, /* Aquila GPIO_02 */ + <&pinctrl_gpio_03>; /* Aquila GPIO_03 */ +}; + +/* Aquila I2C_3_DSI1 */ +&main_i2c0 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + /* I2C on DSI Connector Pin #4 and #6 */ + i2c_dsi_0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* I2C on DSI Connector Pin #52 and #54 */ + i2c_dsi_1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* Aquila I2C_4_CSI1 */ +&main_i2c1 { + status = "okay"; +}; + +/* Aquila I2C_5_CSI2 */ +&main_i2c2 { + status = "okay"; +}; + +/* Aquila I2C_6 */ +&main_i2c5 { + status = "okay"; +}; + +/* Aquila CAN_1 */ +&main_mcan10 { + status = "okay"; +}; + +/* Aquila CAN_3 */ +&main_mcan13 { + status = "okay"; +}; + +/* Aquila SD_1 */ +&main_sdhci1 { + status = "okay"; +}; + +/* Aquila SPI_2 */ +&main_spi0 { + status = "okay"; +}; + +/* Aquila SPI_1 */ +&main_spi2 { + status = "okay"; +}; + +/* Aquila UART_1 */ +&main_uart4 { + status = "okay"; +}; + +/* Aquila UART_3, used as the Linux console */ +&main_uart8 { + status = "okay"; +}; + +/* Aquila I2S_1 */ +&mcasp4 { + status = "okay"; +}; + +&mcu_cpsw { + status = "okay"; +}; + +/* On-module ETH_1 RGMII */ +&mcu_cpsw_port1 { + status = "okay"; +}; + +/* Aquila I2C_1 */ +&mcu_i2c0 { + clock-frequency = <100000>; + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan: fan { + cooling-levels = <102 179 255>; + #cooling-cells = <2>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audio_extrefclk1>; + #sound-dai-cells = <0>; + clocks = <&audio_refclk1>; + clock-names = "mclk"; + AVDD-supply = <®_1v8_sw>; + CPVDD-supply = <®_1v8_sw>; + DBVDD-supply = <®_1v8_sw>; + DCVDD-supply = <®_1v8_sw>; + MICVDD-supply = <®_1v8_sw>; + + wlf,drc-cfg-names = "default", "peaklimiter"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>; + + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + + wlf,in1r-as-dmicdat2; + }; + + /* Current measurement into module VCC */ + hwmon@41 { + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* USB-C OTG (TCPC USB PD PHY) */ + tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + + connector { + compatible = "usb-c-connector"; + data-role = "dual"; + label = "USB-C OTG"; + power-role = "dual"; + try-power-role = "sink"; + self-powered; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + op-sink-microwatt = <1000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_con_hs: endpoint { + remote-endpoint = <&usb0_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_1_con_ss: endpoint { + remote-endpoint = <&usb0_ss_mux>; + }; + }; + }; + }; + }; + + carrier_eeprom: eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Aquila I2C_2 */ +&mcu_i2c1 { + status = "okay"; +}; + +/* Aquila CAN_2 */ +&mcu_mcan0 { + status = "okay"; +}; + +/* Aquila CAN_4 */ +&mcu_mcan1 { + status = "okay"; +}; + +/* Aquila UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +&mhdp { + status = "okay"; +}; + +/* Aquila QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_ospi0_4bit>, <&pinctrl_mcu_ospi0_cs0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + cdns,read-delay = <0>; + cdns,tchsh-ns = <3>; + cdns,tsd2d-ns = <10>; + cdns,tshsl-ns = <30>; + cdns,tslch-ns = <8>; + }; +}; + +/* Aquila PCIE_1 */ +&pcie0_rc { + status = "okay"; +}; + +/* Aquila PCIE_2 */ +&pcie1_rc { + status = "okay"; +}; + +&serdes2 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; +}; + +&serdes_wiz2 { + status = "okay"; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +/* Aquila ADC_[1-4] */ +&tscadc0 { + status = "okay"; +}; + +&usbss0 { + status = "okay"; +}; + +&usb0ss_mux { + status = "okay"; + + port { + usb0_ss_mux: endpoint { + remote-endpoint = <&usb_1_con_ss>; + }; + }; +}; + +&usb0 { + status = "okay"; + + port { + usb0_hs: endpoint { + remote-endpoint = <&usb_1_con_hs>; + }; + }; +}; + +&wkup0_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup0_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup0_alert1>; + }; + }; +}; + +&wkup1_thermal { + cooling-maps { + map0 { + cooling-device = <&fan 1 1>; + trip = <&wkup1_alert0>; + }; + + map1 { + cooling-device = <&fan 2 2>; + trip = <&wkup1_alert1>; + }; + }; +}; + +&wkup_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_04>, /* Aquila GPIO_04 */ + <&pinctrl_gpio_05>, /* Aquila GPIO_05 */ + <&pinctrl_gpio_06>, /* Aquila GPIO_06 */ + <&pinctrl_gpio_07>, /* Aquila GPIO_07 */ + <&pinctrl_gpio_08>; /* Aquila GPIO_08 */ +}; + +/* Aquila UART_2, through RS485 transceiver */ +&wkup_uart0 { + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi new file mode 100644 index 000000000000..0866eb8a6f34 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi @@ -0,0 +1,1840 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/usb/pd.h> +#include "k3-j784s4.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + can0 = &main_mcan10; + can1 = &mcu_mcan0; + can2 = &main_mcan13; + can3 = &mcu_mcan1; + eeprom0 = &som_eeprom; + ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw0_port8; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &mcu_i2c1; + i2c3 = &main_i2c0; + i2c4 = &main_i2c1; + i2c5 = &main_i2c2; + i2c6 = &main_i2c5; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + rtc0 = &rtc_i2c; + serial0 = &main_uart4; + serial1 = &wkup_uart0; + serial2 = &main_uart8; + serial3 = &mcu_uart0; + usb0 = &usb0; + }; + + aquila_key_power: gpio-key-power { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_btn_int>; + status = "disabled"; + + key-power { + /* Aquila CTRL_PWR_BTN_MICO# (AQUILA B93) */ + gpios = <&wkup_gpio0 36 GPIO_ACTIVE_LOW>; + label = "Power Button"; + linux,code = <KEY_POWER>; + }; + }; + + aquila_key_wake: gpio-key-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; + status = "disabled"; + + key-wakeup { + /* Aquila CTRL_WAKE1_MICO# (AQUILA D6) */ + gpios = <&wkup_gpio0 49 GPIO_ACTIVE_LOW>; + label = "Wake Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + /* Aquila CTRL_RESET_MICO# (AQUILA B92) */ + gpio-restart { + compatible = "gpio-restart"; + /* COLD_RESET_REQ */ + gpios = <&som_gpio_expander 1 GPIO_ACTIVE_HIGH>; + priority = <192>; + }; + + /* PWR_DOWN_REQ */ + gpio-poweroff { + compatible = "gpio-poweroff"; + /* PWR_DOWN_REQ */ + gpios = <&som_gpio_expander 2 GPIO_ACTIVE_HIGH>; + timeout-ms = <3000>; + }; + + memory@80000000 { + device_type = "memory"; + /* 32G RAM */ + reg = <0x00 0x80000000 0x00 0x80000000>, + <0x08 0x80000000 0x07 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + }; + + /* Module Power Supply (VCC) */ + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "+V_IN"; + }; + + /* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */ + reg_1v1_usb_bridge: regulator-1v1-vio { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+V1.1_VIO"; + vin-supply = <®_vin>; + }; + + reg_3v3_wifi: regulator-3v3-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_en_3v3_wifi>; + gpio = <&wkup_gpio0 57 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_WIFI"; + startup-delay-us = <20000>; + vin-supply = <®_vin>; + }; + + reg_1v8_stby: regulator-1v8-stby { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_STBY"; + vin-supply = <®_vin>; + }; + + /* Aquila SD_1_PWR_EN */ + reg_sdhc1_vmmc: regulator-sdhci1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1_pwr_en>; + /* Aquila SD_1_PWR_EN (AQUILA A6) */ + gpio = <&main_gpio0 52 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+3V3_SD"; + startup-delay-us = <20000>; + }; + + reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc { + compatible = "regulator-gpio"; + /* SDIO_PWR_SEL_3.3V */ + gpios = <&som_gpio_expander 7 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+VDD_SD_DV"; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + /* On-module USB_1_SS mux */ + usb0ss_mux: gpio-sbu-mux { + compatible = "ti,tmuxhs4212", "gpio-sbu-mux"; + orientation-switch; + /* USB_MUX_SEL */ + select-gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&main_pmx0 { + /* Aquila DP_1_HPD */ + pinctrl_main_dp0_hpd: main-dp0-hpd-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ /* AQUILA B59 */ + >; + }; + + /* Aquila PWM_1 */ + pinctrl_main_ehrpwm0_b: main-ehrpwm0b-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x064, PIN_OUTPUT, 9) /* (AF38) MCAN0_TX.EHRPWM0_B */ /* AQUILA C25 */ + >; + }; + + /* Aquila PWM_2 */ + pinctrl_main_ehrpwm1_a: main-ehrpwm1a-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x060, PIN_OUTPUT, 9) /* (AE36) MCASP2_AXR1.EHRPWM1_A */ /* AQUILA C26 */ + >; + }; + + /* Aquila PWM_3_DSI */ + pinctrl_main_ehrpwm5_a: main-ehrpwm5a-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x084, PIN_OUTPUT, 9) /* (AG38) MCASP0_AXR5.EHRPWM5_A */ /* AQUILA B46 */ + >; + }; + + /* Aquila PWM_4_DP */ + pinctrl_main_ehrpwm2_a: main-ehrpwm2a-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x040, PIN_INPUT, 9) /* (AF37) MCASP0_AXR0.EHRPWM2_A */ /* AQUILA B58 */ + >; + }; + + /* PMIC_INT# */ + pinctrl_pmic_int: main-gpio0-0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTn.GPIO0_0 */ + >; + }; + + /* Aquila GPIO_09_CSI_1 */ + pinctrl_gpio_09_csi_1: main-gpio0-1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ /* AQUILA B17 */ + >; + }; + + /* Aquila GPIO_10_CSI_1 */ + pinctrl_gpio_10_csi_1: main-gpio0-2-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ /* AQUILA B18 */ + >; + }; + + /* Aquila USB_1_OC# */ + pinctrl_usb1_oc: main-gpio0-10-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x028, PIN_INPUT, 7) /* (AE33) MCAN16_RX.GPIO0_10 */ /* AQUILA B75 */ + >; + }; + + /* Aquila USB_1_EN */ + pinctrl_usb1_en_gpio: main-gpio0-11-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x02c, PIN_INPUT, 7) /* (AL32) GPIO0_11 */ /* AQUILA B77 */ + >; + }; + + /* Aquila GPIO_17_DSI_1 */ + pinctrl_gpio_17_dsi_1: main-gpio0-12-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x030, PIN_INPUT, 7) /* (AK37) GPIO0_12 */ /* AQUILA B42 */ + >; + }; + + /* Aquila GPIO_19_DSI_1 */ + pinctrl_gpio_19_dsi_1: main-gpio0-13-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */ /* AQUILA B44 */ + >; + }; + + /* Aquila GPIO_02 */ + pinctrl_gpio_02: main-gpio0-17-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x044, PIN_INPUT, 7) /* (AG37) MCASP0_AXR1.GPIO0_17 */ /* AQUILA D24 */ + >; + }; + + /* Aquila GPIO_20_DSI_1 */ + pinctrl_gpio_20_dsi_1: main-gpio0-18-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x048, PIN_INPUT, 7) /* (AK33) MCASP0_AXR2.GPIO0_18 */ /* AQUILA B45 */ + >; + }; + + /* Aquila GPIO_21_DP */ + pinctrl_gpio_21_dp: main-gpio0-21-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x054, PIN_INPUT, 7) /* (AD37) MCASP2_ACLKX.GPIO0_21 */ /* AQUILA B57 */ + >; + }; + + /* Aquila USB_1_INT# */ + pinctrl_usb1_int: main-gpio0-28-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x070, PIN_INPUT, 7) /* (AH38) MCAN1_RX.GPIO0_28 */ /* AQUILA B74 */ + >; + }; + + /* Aquila GPIO_03 */ + pinctrl_gpio_03: main-gpio0-29-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x074, PIN_INPUT, 7) /* (AC33) MCAN2_TX.GPIO0_29 */ /* AQUILA D25 */ + >; + }; + + /* Aquila GPIO_18_DSI_1 */ + pinctrl_gpio_18_dsi_1: main-gpio0-31-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x07c, PIN_INPUT, 7) /* (AJ38) MCASP0_AXR3.GPIO0_31 */ /* AQUILA B43 */ + >; + }; + + /* Aquila PCIE_1_RESET# */ + pinctrl_pcie0_reset: main-gpio0-32-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x080, PIN_INPUT, 7) /* (AK34) MCASP0_AXR4.GPIO0_32 */ /* AQUILA C38 */ + >; + }; + + /* Aquila PWM_3_DSI as GPIO */ + pinctrl_pwm3_dsi_gpio: main-gpio0-33-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x084, PIN_INPUT, 7) /* (AG38) MCASP0_AXR5.GPIO0_33 */ /* AQUILA B46 */ + >; + }; + + /* Aquila GPIO_01 */ + pinctrl_gpio_01: main-gpio0-34-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x088, PIN_INPUT, 7) /* (AF36) MCASP0_AXR6.GPIO0_34 */ /* AQUILA D23 */ + >; + }; + + /* Aquila PCIE_2_RESET# */ + pinctrl_pcie1_reset: main-gpio0-41-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0a4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ /* AQUILA C35 */ + >; + }; + + /* Aquila ETH_2_xGMII_INT# */ + pinctrl_eth2_int: main-gpio0-44-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 7) /* (AL33) MCASP1_AXR3.GPIO0_44 */ /* AQUILA B81 */ + >; + }; + + /* Aquila GPIO_11_CSI_1 */ + pinctrl_gpio_11_csi_1: main-gpio0-47-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0bc, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */ /* AQUILA A11 */ + >; + }; + + /* Aquila GPIO_12_CSI_1 */ + pinctrl_gpio_12_csi_1: main-gpio0-48-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */ /* AQUILA B19 */ + >; + }; + + /* Aquila SD_1_PWR_EN */ + pinctrl_sd1_pwr_en: main-gpio0-52-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0d0, PIN_INPUT, 7) /* (AP38) SPI0_CS1.GPIO0_52 */ /* AQUILA A6 */ + >; + }; + + /* Aquila SD_1_CD# as GPIO */ + pinctrl_sd1_cd_gpio: main-gpio0-58-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0e8, PIN_INPUT_PULLUP, 7) /* (AR38) TIMER_IO0.GPIO0_58 */ /* AQUILA A1 */ + >; + }; + + /* Aquila I2C_3_DSI1 */ + pinctrl_main_i2c0: main-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ /* AQUILA B41 */ + J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ /* AQUILA B40 */ + >; + }; + + /* Aquila I2C_4_CSI1 */ + pinctrl_main_i2c1: main-i2c1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x020, PIN_INPUT_PULLUP, 12) /* (AJ35) MCAN15_RX.I2C1_SCL */ /* AQUILA A13 */ + J784S4_IOPAD(0x024, PIN_INPUT_PULLUP, 12) /* (AH34) MCAN16_TX.I2C1_SDA */ /* AQUILA A12 */ + >; + }; + + /* Aquila I2C_5_CSI2 */ + pinctrl_main_i2c2: main-i2c2-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (AC32) MCASP1_AXR1.I2C2_SCL */ /* AQUILA C6 */ + J784S4_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (AC37) MCASP1_AXR2.I2C2_SDA */ /* AQUILA C5 */ + >; + }; + + /* Aquila I2C_6 */ + pinctrl_main_i2c5: main-i2c5-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ /* AQUILA C19 */ + J784S4_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ /* AQUILA C18 */ + >; + }; + + /* Aquila I2S_1_MCLK */ + pinctrl_audio_extrefclk1: audio-extrefclk1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x078, PIN_OUTPUT, 1) /* (AH37) MCAN2_RX.AUDIO_EXT_REFCLK1 */ /* AQUILA B24 */ + >; + }; + + /* Aquila CAN_1 */ + pinctrl_main_mcan10: main-mcan10-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0b8, PIN_INPUT, 0) /* (AC34) MCASP1_ACLKX.MCAN10_RX */ /* AQUILA B49 */ + J784S4_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (AL34) MCASP1_AXR4.MCAN10_TX */ /* AQUILA B48 */ + >; + }; + + /* Aquila CAN_3 */ + pinctrl_main_mcan13: main-mcan13-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x010, PIN_INPUT, 0) /* (AH33) MCAN13_RX */ /* AQUILA B54 */ + J784S4_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AF33) MCAN13_TX */ /* AQUILA B53 */ + >; + }; + + /* Aquila I2S_1 */ + pinctrl_main_mcasp4: main-mcasp4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c8, PIN_INPUT, 1) /* (AJ32) EXT_REFCLK1.MCASP4_ACLKX */ /* AQUILA B20 */ + J784S4_IOPAD(0x06c, PIN_INPUT, 1) /* (AJ37) MCAN1_TX.MCASP4_AFSX */ /* AQUILA B21 */ + J784S4_IOPAD(0x068, PIN_OUTPUT, 1) /* (AE38) MCAN0_RX.MCASP4_AXR1 */ /* AQUILA B22 */ + J784S4_IOPAD(0x0c4, PIN_INPUT, 1) /* (AD36) ECAP0_IN_APWM_OUT.MCASP4_AXR2 */ /* AQUILA B23 */ + >; + }; + + /* Aquila ETH_2_XGMII_MDIO */ + pinctrl_main_mdio1: main-mdio1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x058, PIN_OUTPUT, 4) /* (AE37) MCASP2_AFSX.MDIO1_MDC */ /* AQUILA B90 */ + J784S4_IOPAD(0x05c, PIN_INPUT, 4) /* (AC36) MCASP2_AXR0.MDIO1_MDIO */ /* AQUILA B89 */ + >; + }; + + /* Aquila SD_1 */ + pinctrl_main_mmc1: main-mmc1-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ /* AQUILA A5 */ + J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ /* AQUILA A7 */ + J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ + J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ /* AQUILA A3 */ + J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ /* AQUILA A2 */ + J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ /* AQUILA A10 */ + J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ /* AQUILA A8 */ + >; + }; + + /* Aquila SPI_2 */ + pinctrl_main_spi0: main-spi0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AN38) SPI0_CLK */ /* AQUILA D14 */ + J784S4_IOPAD(0x0d8, PIN_INPUT, 0) /* (AM35) SPI0_D0 */ /* AQUILA D15 */ + J784S4_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (AM36) SPI0_D1 */ /* AQUILA D17 */ + >; + }; + + /* Aquila SPI_2 CS */ + pinctrl_main_spi0_cs0: main-spi0-cs0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (AM37) SPI0_CS0 */ /* AQUILA D16 */ + >; + }; + + /* Aquila SPI_1 */ + pinctrl_main_spi2: main-spi2-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0a0, PIN_OUTPUT, 10) /* (AD34) MCASP0_AXR12.SPI2_CLK */ /* AQUILA D12 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 10) /* (AF34) MCASP0_AXR14.SPI2_D0 */ /* AQUILA D10 */ + J784S4_IOPAD(0x0ac, PIN_OUTPUT, 10) /* (AE34) MCASP0_AXR15.SPI2_D1 */ /* AQUILA D11 */ + >; + }; + + /* Aquila SPI_1 CS */ + pinctrl_main_spi2_cs0: main-spi2-cs0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x09c, PIN_OUTPUT, 10) /* (AF35) MCASP0_AXR11.SPI2_CS1 */ /* AQUILA D9 */ + >; + }; + + /* Aquila UART_1 */ + pinctrl_main_uart4: main-uart4-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x094, PIN_INPUT, 11) /* (AG35) MCASP0_AXR9.UART4_CTSn */ /* AQUILA B36 */ + J784S4_IOPAD(0x098, PIN_OUTPUT, 11) /* (AH36) MCASP0_AXR10.UART4_RTSn */ /* AQUILA B38 */ + J784S4_IOPAD(0x08c, PIN_INPUT, 11) /* (AE35) MCASP0_AXR7.UART4_RXD */ /* AQUILA B35 */ + J784S4_IOPAD(0x090, PIN_OUTPUT, 11) /* (AC35) MCASP0_AXR8.UART4_TXD */ /* AQUILA B37 */ + >; + }; + + /* Aquila UART_3, used as the Linux console */ + pinctrl_main_uart8: main-uart8-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x038, PIN_INPUT, 11) /* (AK35) MCASP0_ACLKX.UART8_RXD */ /* AQUILA D19 */ + J784S4_IOPAD(0x03c, PIN_OUTPUT, 11) /* (AK38) MCASP0_AFSX.UART8_TXD */ /* AQUILA D20 */ + >; + }; +}; + +&wkup_pmx0 { + /* Aquila QSPI_1 (4-bit) */ + pinctrl_mcu_ospi0_4bit: mcu-ospi0-4bit-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ + >; + }; + + /* Aquila QSPI_1 (8-bit) */ + pinctrl_mcu_ospi0_8bit: mcu-ospi0-8bit-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ /* AQUILA B70 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ /* AQUILA B71 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ /* AQUILA B72 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ /* AQUILA B73 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ + >; + }; + + /* Aquila QSPI_1_CS1# */ + pinctrl_mcu_ospi0_cs0: mcu-ospi0-cs0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ /* AQUILA B66 */ + >; + }; + + /* Aquila QSPI_1_CS2# */ + pinctrl_mcu_ospi0_cs1: mcu-ospi0-cs1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (A33) MCU_OSPI0_CSn1 */ /* AQUILA B62 */ + >; + }; + + /* Aquila QSPI_1_SCK as GPIO */ + pinctrl_wkup_gpio_16: wkup-gpio0-16-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (E32) MCU_OSPI0_CLK.WKUP_GPIO0_16 */ /* AQUILA B65 */ + >; + }; + + /* Aquila GPIO_04 */ + pinctrl_gpio_04: wkup-gpio0-17-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (D32) MCU_OSPI0_LBCLKO.WKUP_GPIO0_17 */ /* AQUILA C20 */ + >; + }; + + /* Aquila QSPI_1_DQS as GPIO */ + pinctrl_wkup_gpio_18: wkup-gpio0-18-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (C34) MCU_OSPI0_DQS.WKUP_GPIO0_18 */ /* AQUILA B63 */ + >; + }; + + /* Aquila QSPI_1_IO0 as GPIO */ + pinctrl_wkup_gpio_19: wkup-gpio0-19-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (B33) MCU_OSPI0_D0.WKUP_GPIO0_19 */ /* AQUILA B68 */ + >; + }; + + /* Aquila QSPI_1_IO1 as GPIO */ + pinctrl_wkup_gpio_20: wkup-gpio0-20-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (B32) MCU_OSPI0_D1.WKUP_GPIO0_20 */ /* AQUILA B67 */ + >; + }; + + /* Aquila QSPI_1_IO2 as GPIO */ + pinctrl_wkup_gpio_21: wkup-gpio0-21-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (C33) MCU_OSPI0_D2.WKUP_GPIO0_21 */ /* AQUILA B61 */ + >; + }; + + /* Aquila QSPI_1_IO3 as GPIO */ + pinctrl_wkup_gpio_22: wkup-gpio0-22-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 7) /* (C35) MCU_OSPI0_D3.WKUP_GPIO0_22 */ /* AQUILA B60 */ + >; + }; + + /* Aquila QSPI_1_IO4 as GPIO */ + pinctrl_wkup_gpio_23: wkup-gpio0-23-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (D33) MCU_OSPI0_D4.WKUP_GPIO0_23 */ /* AQUILA B70 */ + >; + }; + + /* Aquila QSPI_1_IO5 as GPIO */ + pinctrl_wkup_gpio_24: wkup-gpio0-24-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (D34) MCU_OSPI0_D5.WKUP_GPIO0_24 */ /* AQUILA B71 */ + >; + }; + + /* Aquila QSPI_1_IO6 as GPIO */ + pinctrl_wkup_gpio_25: wkup-gpio0-25-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (E34) MCU_OSPI0_D6.WKUP_GPIO0_25 */ /* AQUILA B72 */ + >; + }; + + /* Aquila QSPI_1_IO7 as GPIO */ + pinctrl_wkup_gpio_26: wkup-gpio0-26-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (E33) MCU_OSPI0_D7.WKUP_GPIO0_26 */ /* AQUILA B73 */ + >; + }; + + /* Aquila QSPI_1_CS#1 as GPIO */ + pinctrl_wkup_gpio_27: wkup-gpio0-27-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 7) /* (A32) MCU_OSPI0_CSn0.WKUP_GPIO0_27 */ /* AQUILA B66 */ + >; + }; + + /* Aquila QSPI_1_CS#2 as GPIO */ + pinctrl_wkup_gpio_28: wkup-gpio0-28-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ /* AQUILA B62 */ + >; + }; +}; + +&wkup_pmx1 { + /* Aquila UART_4 (RXD) */ + pinctrl_mcu_uart0_rx: mcu-uart0-rx-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 4) /* (D31) MCU_OSPI1_D1.MCU_UART0_RXD */ /* AQUILA D21 */ + >; + }; + + /* Aquila GPIO_05 */ + pinctrl_gpio_05: wkup-gpio0-29-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (B34) MCU_OSPI0_CSn2.WKUP_GPIO0_29 */ /* AQUILA C21 */ + >; + }; + + /* Aquila GPIO_06 */ + pinctrl_gpio_06: wkup-gpio0-30-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 7) /* (C32) MCU_OSPI0_CSn3.WKUP_GPIO0_30 */ /* AQUILA C22 */ + >; + }; + + /* Aquila GPIO_07 */ + pinctrl_gpio_07: wkup-gpio0-31-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (F32) MCU_OSPI1_CLK.WKUP_GPIO0_31 */ /* AQUILA C23 */ + >; + }; + + /* Aquila GPIO_13_CSI_2 */ + pinctrl_gpio_13_csi_2: wkup-gpio0-32-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (C31) MCU_OSPI1_LBCLKO.WKUP_GPIO0_32 */ /* AQUILA C1 */ + >; + }; + + /* Aquila GPIO_14_CSI_2 */ + pinctrl_gpio_14_csi_2: wkup-gpio0-33-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (F31) MCU_OSPI1_DQS.WKUP_GPIO0_33 */ /* AQUILA C2 */ + >; + }; + + /* RTC_IRQ# */ + pinctrl_rtc_irq: wkup-gpio0-34-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (E35) MCU_OSPI1_D0.WKUP_GPIO0_34 */ + >; + }; + + /* Aquila CTRL_PWR_BTN_MICO# (PWR_BTN_INT#) */ + pinctrl_pwr_btn_int: wkup-gpio0-36-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT_PULLUP, 7) /* (G31) MCU_OSPI1_D2.WKUP_GPIO0_36 */ /* AQUILA B92 */ + >; + }; + + /* Aquila GPIO_15_CSI_2 */ + pinctrl_gpio_15_csi_2: wkup-gpio0-37-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (F33) MCU_OSPI1_D3.WKUP_GPIO0_37 */ /* AQUILA C3 */ + >; + }; + + /* Aquila GPIO_08 */ + pinctrl_gpio_08: wkup-gpio0-38-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (G32) MCU_OSPI1_CSn0.WKUP_GPIO0_38 */ /* AQUILA C24 */ + >; + }; + + /* Aquila GPIO_16_CSI_2 */ + pinctrl_gpio_16_csi_2: wkup-gpio0-39-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ /* AQUILA C4 */ + >; + }; +}; + +&wkup_pmx2 { + /* Aquila ADC_[1-4] */ + pinctrl_mcu_adc0: mcu-adc0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (P36) MCU_ADC0_AIN0 */ /* AQUILA D1 */ + J784S4_WKUP_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (V36) MCU_ADC0_AIN1 */ /* AQUILA D2 */ + J784S4_WKUP_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (T34) MCU_ADC0_AIN2 */ /* AQUILA D3 */ + J784S4_WKUP_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (T36) MCU_ADC0_AIN3 */ /* AQUILA D4 */ + >; + }; + + /* Aquila CTRL_MCLK_MOCI */ + pinctrl_mcu_clkout0: mcu-clkout0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x084, PIN_OUTPUT, 6) /* (M38) WKUP_GPIO0_11.MCU_CLKOUT0 */ /* AQUILA A14 */ + >; + }; + + /* Aquila I2C_1 */ + pinctrl_mcu_i2c0: mcu-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ /* AQUILA D8 */ + J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ /* AQUILA D7 */ + >; + }; + + /* Aquila I2C_2 */ + pinctrl_mcu_i2c1: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ /* AQUILA C17 */ + J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ /* AQUILA C16 */ + >; + }; + + /* Aquila CAN_2 */ + pinctrl_mcu_mcan0: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ /* AQUILA B51 */ + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ /* AQUILA B50 */ + >; + }; + + /* Aquila CAN_4 */ + pinctrl_mcu_mcan1: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ /* AQUILA B56 */ + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ /* AQUILA B55 */ + >; + }; + + /* On-module ETH_1 MDIO */ + pinctrl_mcu_mdio: mcu-mdio-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; + + /* On-module ETH_1 RGMII */ + pinctrl_mcu_rgmii1: mcu-rgmii1-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + /* On-module SPI (TPM_SPI) */ + pinctrl_mcu_spi0: mcu-spi0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (G38) MCU_SPI0_CLK */ + J784S4_WKUP_IOPAD(0x044, PIN_OUTPUT, 0) /* (F37) MCU_SPI0_CS0 */ + J784S4_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (H36) MCU_SPI0_D0 */ + J784S4_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (J38) MCU_SPI0_D1 */ + >; + }; + + /* Aquila UART_4 (TX) */ + pinctrl_mcu_uart0_tx: mcu-uart0-tx-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 2) /* (L33) WKUP_GPIO0_10.MCU_UART0_TXD */ /* AQUILA D22 */ + >; + }; + + /* On-module Wi-Fi Power Enable */ + pinctrl_en_3v3_wifi: wkup-gpio0-57-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */ + >; + }; + + /* On-module TPM IRQ# */ + pinctrl_tpm_irq: wkup-gpio0-81-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 7) /* (V34) MCU_ADC1_AIN2.WKUP_GPIO0_81 */ + >; + }; + + /* On-module I2C - WKUP_I2C0 */ + pinctrl_wkup_i2c0: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + >; + }; + + /* Aquila UART_2 */ + pinctrl_wkup_uart0: wkup-uart0-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ /* AQUILA B32 */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ /* AQUILA B34 */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ /* AQUILA B31 */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ /* AQUILA B33 */ + >; + }; +}; + +&wkup_pmx3 { + /* Aquila CTRL_WAKE1_MICO# */ + pinctrl_ctrl_wake1_mico: wkup-gpio0-49-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_INPUT_PULLUP, 7) /* (M33) WKUP_GPIO0_49 */ /* AQUILA D6 */ + >; + }; +}; + +/* Aquila I2S_1_MCLK */ +&audio_refclk1 { + assigned-clock-rates = <24576000>; +}; + +/* On-module ETH_1 MDIO */ +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_mdio>; + status = "disabled"; + + mcu_phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <79 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +&dss { + assigned-clocks = <&k3_clks 218 2>, + <&k3_clks 218 5>; + assigned-clock-parents = <&k3_clks 218 3>, + <&k3_clks 218 7>; + status = "disabled"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; +}; + +&main0_crit { + temperature = <105000>; +}; + +&main0_thermal { + trips { + main0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + main0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&main1_crit { + temperature = <105000>; +}; + +&main1_thermal { + trips { + main1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + main1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&main2_crit { + temperature = <105000>; +}; + +&main2_thermal { + trips { + main2_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + main2_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&main3_crit { + temperature = <105000>; +}; + +&main3_thermal { + trips { + main3_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + main3_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&main4_crit { + temperature = <105000>; +}; + +&main4_thermal { + trips { + main4_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + main4_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +/* Aquila ETH_2 SGMII PHY */ +&main_cpsw0_port8 { + phy-mode = "sgmii"; + phys = <&cpsw0_phy_gmii_sel 8>, <&serdes2_sgmii_link>; + phy-names = "mac", "serdes"; + status = "disabled"; +}; + +/* Aquila ETH_2_XGMII_MDIO */ +&main_cpsw0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mdio1>; +}; + +/* Aquila PWM_1 */ +&main_ehrpwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_ehrpwm0_b>; + status = "disabled"; +}; + +/* Aquila PWM_2 */ +&main_ehrpwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_ehrpwm1_a>; + status = "disabled"; +}; + +/* Aquila PWM_4_DP */ +&main_ehrpwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_ehrpwm2_a>; + status = "disabled"; +}; + +/* Aquila PWM_3_DSI */ +&main_ehrpwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_ehrpwm5_a>; + status = "disabled"; +}; + +&main_gpio0 { + gpio-line-names = + "", /* 0 */ + "AQUILA_B17", + "AQUILA_B18", + "AQUILA_B53", + "AQUILA_B54", + "AQUILA_B59", + "AQUILA_C18", + "AQUILA_C19", + "AQUILA_A13", + "AQUILA_A12", + "AQUILA_B75", /* 10 */ + "AQUILA_B77", + "AQUILA_B42", + "AQUILA_B44", + "AQUILA_D19", + "AQUILA_D20", + "AQUILA_B58", + "AQUILA_D24", + "AQUILA_B45", + "AQUILA_C06", + "AQUILA_C05", /* 20 */ + "AQUILA_B57", + "AQUILA_B90", + "AQUILA_B89", + "AQUILA_C26", + "AQUILA_C25", + "AQUILA_B22", + "AQUILA_B21", + "AQUILA_B74", + "AQUILA_D25", + "AQUILA_B24", /* 30 */ + "AQUILA_B43", + "AQUILA_C38", + "AQUILA_B46", + "AQUILA_D23", + "AQUILA_B35", + "AQUILA_B37", + "AQUILA_B36", + "AQUILA_B38", + "AQUILA_D09", + "AQUILA_D12", /* 40 */ + "AQUILA_C35", + "AQUILA_D10", + "AQUILA_D11", + "AQUILA_B81", + "AQUILA_B48", + "AQUILA_B49", + "AQUILA_A11", + "AQUILA_B19", + "AQUILA_B23", + "AQUILA_B20", /* 50 */ + "AQUILA_D16", + "AQUILA_A06", + "AQUILA_D14", + "AQUILA_D15", + "AQUILA_D17", + "AQUILA_B41", + "AQUILA_B40", + "AQUILA_A01", + "", + "AQUILA_A08", /* 60 */ + "AQUILA_A10", + "AQUILA_A02", + "AQUILA_A03", + "AQUILA_A05", + "AQUILA_A07"; + + status = "okay"; +}; + +/* Aquila I2C_3_DSI1 */ +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_i2c0>; + clock-frequency = <100000>; + status = "disabled"; +}; + +/* Aquila I2C_4_CSI1 */ +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_i2c1>; + clock-frequency = <400000>; + status = "disabled"; +}; + +/* Aquila I2C_5_CSI2 */ +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_i2c2>; + clock-frequency = <400000>; + status = "disabled"; +}; + +/* Aquila I2C_6 */ +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_i2c5>; + clock-frequency = <400000>; + status = "disabled"; +}; + +/* Aquila CAN_1 */ +&main_mcan10 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mcan10>; + status = "disabled"; +}; + +/* Aquila CAN_3 */ +&main_mcan13 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mcan13>; + status = "disabled"; +}; + +/* On-module eMMC */ +&main_sdhci0 { + disable-wp; + non-removable; + ti,driver-strength-ohm = <50>; + status = "okay"; +}; + +/* Aquila SD_1 */ +&main_sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mmc1>, <&pinctrl_sd1_cd_gpio>; + cd-gpios = <&main_gpio0 58 GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <®_sdhc1_vmmc>; + vqmmc-supply = <®_sdhc1_vqmmc>; + ti,driver-strength-ohm = <50>; + ti,fails-without-test-cd; + status = "disabled"; +}; + +/* Aquila SPI_2 */ +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_spi0>, <&pinctrl_main_spi0_cs0>; + status = "disabled"; +}; + +/* Aquila SPI_1 */ +&main_spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_spi2>, <&pinctrl_main_spi2_cs0>; + status = "disabled"; +}; + +/* Aquila UART_1 */ +&main_uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_uart4>; + status = "disabled"; +}; + +/* Aquila UART_3, used as the Linux console */ +&main_uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_uart8>; + status = "disabled"; +}; + +/* Aquila I2S_1 */ +&mcasp4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mcasp4>; + op-mode = <0>; /* MCASP_I2S_MODE */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 1 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tdm-slots = <2>; + #sound-dai-cells = <0>; + status = "disabled"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_rgmii1>; + status = "disabled"; +}; + +/* On-module ETH_1 RGMII */ +&mcu_cpsw_port1 { + phy-handle = <&mcu_phy0>; + phy-mode = "rgmii-id"; + status = "disabled"; +}; + +/* Aquila I2C_1 */ +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_i2c0>; + clock-frequency = <400000>; + status = "disabled"; +}; + +/* Aquila I2C_2 */ +&mcu_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_i2c1>; + clock-frequency = <400000>; + status = "disabled"; +}; + +/* Aquila CAN_2 */ +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_mcan0>; + status = "disabled"; +}; + +/* Aquila CAN_4 */ +&mcu_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_mcan1>; + status = "disabled"; +}; + +/* On-module SPI (TPM_SPI) */ +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_spi0>; + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm_irq>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <81 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <33000000>; + }; +}; + +/* Aquila UART_4 */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_uart0_rx>, <&pinctrl_mcu_uart0_tx>; + status = "disabled"; +}; + +&mhdp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_dp0_hpd>; + phy-names = "dpphy"; + phys = <&serdes4_dp0_link>; + status = "disabled"; +}; + +/* Aquila QSPI_1 */ +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_ospi0_8bit>, <&pinctrl_mcu_ospi0_cs0>; + status = "disabled"; +}; + +/* Aquila PCIE_1 */ +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reset>; + clocks = <&k3_clks 332 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + num-lanes = <2>; + phy-names = "pcie-phy"; + phys = <&serdes1_pcie0_2l_link>; + reset-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>; + status = "disabled"; +}; + +/* Aquila PCIE_2 */ +&pcie1_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1_reset>; + clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + num-lanes = <2>; + phy-names = "pcie-phy"; + phys = <&serdes0_pcie1_2l_link>; + reset-gpios = <&main_gpio0 41 GPIO_ACTIVE_HIGH>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>; + status = "disabled"; +}; + +/* On-module PCIe USB Bridge */ +&pcie2_rc { + clocks = <&k3_clks 334 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + num-lanes = <1>; + phy-names = "pcie-phy"; + phys = <&serdes1_pcie2_1l_link>; + reset-gpios = <&som_gpio_expander 3 GPIO_ACTIVE_HIGH>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie1_proxy_ctrl 0x3>; + status = "okay"; + + pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + usb@0 { + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; + }; + }; +}; + +/* PCIE for On-module Wi-Fi */ +&pcie3_rc { + clocks = <&k3_clks 335 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + num-lanes = <1>; + phy-names = "pcie-phy"; + phys = <&serdes0_pcie3_1l_link>; + reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>; + ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>; + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + /* Aquila PCIE_2 */ + serdes0_pcie1_2l_link: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + cdns,num-lanes = <2>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + + /* On-module PCIe Wi-Fi */ + serdes0_pcie3_1l_link: phy@2 { + reg = <2>; + #phy-cells = <0>; + resets = <&serdes_wiz0 3>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + + /* Aquila USB0 SS */ + serdes0_usb0_ss_link: phy@3 { + reg = <3>; + #phy-cells = <0>; + resets = <&serdes_wiz0 4>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_USB3>; + }; +}; + +&serdes1 { + status = "okay"; + + /* Aquila PCIE_1 */ + serdes1_pcie0_2l_link: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + cdns,num-lanes = <2>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + + /* On-module PCIe USB Bridge */ + serdes1_pcie2_1l_link: phy@2 { + reg = <2>; + #phy-cells = <0>; + resets = <&serdes_wiz1 3>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; +}; + +&serdes2 { + status = "disabled"; + + /* Aquila ETH_2 xGMII */ + serdes2_sgmii_link: phy@3 { + reg = <3>; + #phy-cells = <0>; + resets = <&serdes_wiz2 4>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_SGMII>; + }; +}; + +&serdes4 { + status = "disabled"; + + /* Aquila DP_1 */ + serdes4_dp0_link: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, + <&serdes_wiz4 3>, <&serdes_wiz4 4>; + cdns,max-bit-rate = <5400>; + cdns,num-lanes = <4>; + cdns,phy-type = <PHY_TYPE_DP>; + }; +}; + +&serdes_refclk { + clock-frequency = <100000000>; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, /* Aquila PCIE_2 L0 */ + <J784S4_SERDES0_LANE1_PCIE1_LANE1>, /* Aquila PCIE_2 L1 */ + <J784S4_SERDES0_LANE2_PCIE3_LANE0>, /* On-module PCIe Wi-Fi */ + <J784S4_SERDES0_LANE3_USB>, /* Aquila USB0 SS */ + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, /* Aquila PCIE_1 L0 */ + <J784S4_SERDES1_LANE1_PCIE0_LANE1>, /* Aquila PCIE_1 L1 */ + <J784S4_SERDES1_LANE2_PCIE2_LANE0>, /* On-module PCIe USB Bridge */ + <J784S4_SERDES1_LANE3_QSGMII_LANE2>, /* Aquila SGMII MSP_9 */ + <J784S4_SERDES2_LANE0_QSGMII_LANE5>, /* Aquila SGMII MSP_6 */ + <J784S4_SERDES2_LANE1_QSGMII_LANE6>, /* Aquila SGMII MSP_7 */ + <J784S4_SERDES2_LANE2_QSGMII_LANE7>, /* Aquila SGMII MSP_8 */ + <J784S4_SERDES2_LANE3_QSGMII_LANE8>, /* Aquila ETH_2 xGMII */ + <J784S4_SERDES4_LANE0_EDP_LANE0>, /* Aquila DP L0 */ + <J784S4_SERDES4_LANE1_EDP_LANE1>, /* Aquila DP L1 */ + <J784S4_SERDES4_LANE2_EDP_LANE2>, /* Aquila DP L2 */ + <J784S4_SERDES4_LANE3_EDP_LANE3>; /* Aquila DP L3 */ +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes_wiz1 { + status = "okay"; +}; + +&serdes_wiz2 { + status = "disabled"; +}; + +&serdes_wiz4 { + status = "disabled"; +}; + +/* Aquila ADC_[1-4] */ +&tscadc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mcu_adc0>; + status = "disabled"; + + adc { + ti,adc-channels = <0 1 2 3>; + }; +}; + +&usb0 { + phys = <&serdes0_usb0_ss_link>; + phy-names = "cdns3,usb3-phy"; + dr_mode = "otg"; + maximum-speed = "super-speed"; + usb-role-switch; + status = "disabled"; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + ti,vbus-divider; + status = "disabled"; +}; + +&wkup_gpio0 { + gpio-line-names = + "", /* 0 */ + "", + "", + "AQUILA_C53", + "AQUILA_B55", + "AQUILA_B56", + "AQUILA_B32", + "AQUILA_B34", + "AQUILA_C17", + "AQUILA_C16", + "AQUILA_D22", /* 10 */ + "", + "", + "", + "", + "", + "AQUILA_B65", + "AQUILA_C20", + "AQUILA_B63", + "AQUILA_B68", + "AQUILA_B67", /* 20 */ + "AQUILA_B61", + "AQUILA_B60", + "AQUILA_B70", + "AQUILA_B71", + "AQUILA_B72", + "AQUILC_B73", + "AQUILA_B66", + "AQUILA_B62", + "AQUILA_C21", + "AQUILA_C22", /* 30 */ + "AQUILA_C23", + "AQUILA_C01", + "AQUILA_C02", + "", + "AQUILA_D21", + "", + "AQUILA_C03", + "AQUILA_C24", + "AQUILA_C04", + "AQUILA_B84", /* 40 */ + "", + "AQUILA_B86", + "AQUILA_B87", + "", + "", + "AQUILA_B83", + "", + "", + "", + "", /* 50 */ + "", + "", + "", + "", + "", + "", + "", + "AQUILA_B31", + "AQUILA_B33", + "AQUILA_B50", /* 60 */ + "AQUILA_B51", + "", + "", + "", + "AQUILA_D08", + "", + "", + "", + "", + "", /* 70 */ + "AQUILA_D01", + "AQUILA_D02", + "AQUILA_D03", + "AQUILA_D04", + "AQUILA_D54", + "AQUILA_D55", + "AQUILA_C55", + "AQUILA_C56", + "", + "AQUILA_C36", /* 80 */ + "", + "", + "", + "", + "", + "", + "AQUILA_D07", + ""; + + status = "okay"; +}; + +/* On-module I2C - WKUP_I2C0 */ +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wkup_i2c0>; + clock-frequency = <400000>; + status = "okay"; + + som_gpio_expander: gpio@21 { + compatible = "ti,tca6408"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "USB_MUX_SEL", + "COLD_RESET_REQ", + "PWR_DOWN_REQ", + "PCIE_3_RESET#", + "PCIE_4_RESET#", + "WIFI_DISABLE", + "BT_DISABLE", + "SDIO_PWR_SEL_3.3V"; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + tps62873a: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <600000>; + regulator-name = "+VDD_CPU_AVS"; + }; + + tps62873b: regulator@43 { + compatible = "ti,tps62873"; + reg = <0x43>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <840000>; + regulator-min-microvolt = <760000>; + regulator-name = "+V0.8_VDD_CORE"; + }; + + pmic_tps6594: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_int>; + interrupt-parent = <&main_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + gpio-controller; + buck12-supply = <®_vin>; + buck3-supply = <®_vin>; + buck4-supply = <®_vin>; + buck5-supply = <®_vin>; + ldo1-supply = <®_vin>; + ldo2-supply = <®_vin>; + ldo3-supply = <®_vin>; + ldo4-supply = <®_vin>; + system-power-controller; + ti,primary-pmic; + + regulators { + reg_vdd_ddr: buck12 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+V1.1_VDD_DDR (PMIC BUCK12)"; + }; + + reg_vdd_ram: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+V0.85_VDD_RAM (PMIC BUCK3)"; + }; + + reg_vdd_io: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_VDD_IO (PMIC BUCK4)"; + }; + + reg_3v3_vio: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_VIO (PMIC BUCK5)"; + }; + + reg_vda_phy: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_VDA_PHY (PMIC LDO1)"; + }; + + reg_2v5_eth: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <2500000>; + regulator-name = "+V2.5_ETH (PMIC LDO2)"; + }; + + reg_vda_dll: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <800000>; + regulator-min-microvolt = <800000>; + regulator-name = "+V0.8_VDA_DLL (PMIC LDO3)"; + }; + + reg_vda_pll: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V0.8_VDA_PLL (PMIC LDO4)"; + }; + }; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + som_eeprom: eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&wkup0_crit { + temperature = <105000>; +}; + +&wkup0_thermal { + trips { + wkup0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + wkup0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&wkup1_crit { + temperature = <105000>; +}; + +&wkup1_thermal { + trips { + wkup1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "active"; + }; + + wkup1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + }; +}; + +&wkup_gpio_intr { + status = "okay"; +}; + +/* Aquila UART_2 */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wkup_uart0>; + status = "disabled"; +}; + +#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi" +#include "k3-j784s4-ti-ipc-firmware.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 5896e57b5b9e..abe2f21e0e1d 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -236,8 +236,8 @@ main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ - J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ + J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ + J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ >; }; @@ -416,8 +416,8 @@ mcu_i2c0_pins_default: mcu-i2c0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */ - J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */ + J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ >; }; @@ -771,7 +771,7 @@ &mcu_cpsw_port1 { status = "okay"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&mcu_phy0>; bootph-all; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index f684ce6ad9ad..3e5efdfe87f1 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -323,6 +323,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -334,7 +335,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 692c4745040e..fec1db8b133d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -432,6 +432,8 @@ "tx4", "tx5", "tx6", "tx7", "rx"; + status = "disabled"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts index 352fb60e6ce8..8040b6528c18 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts @@ -663,6 +663,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -677,7 +678,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 45311438315f..47702fb279a4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -769,6 +769,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -780,7 +781,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso index f84aa9f94547..3bfe6036a8e6 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso @@ -37,7 +37,7 @@ &cpsw0_port1 { status = "okay"; phy-handle = <&cpsw9g_phy12>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; mac-address = [00 00 00 00 00 00]; phys = <&cpsw0_phy_gmii_sel 1>; }; @@ -45,7 +45,7 @@ &cpsw0_port2 { status = "okay"; phy-handle = <&cpsw9g_phy15>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; mac-address = [00 00 00 00 00 00]; phys = <&cpsw0_phy_gmii_sel 2>; }; @@ -53,7 +53,7 @@ &cpsw0_port3 { status = "okay"; phy-handle = <&cpsw9g_phy0>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; mac-address = [00 00 00 00 00 00]; phys = <&cpsw0_phy_gmii_sel 3>; }; @@ -61,7 +61,7 @@ &cpsw0_port4 { status = "okay"; phy-handle = <&cpsw9g_phy3>; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; mac-address = [00 00 00 00 00 00]; phys = <&cpsw0_phy_gmii_sel 4>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 42a21398e389..d5e5e89be5e9 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -551,6 +551,8 @@ "tx4", "tx5", "tx6", "tx7", "rx"; + status = "disabled"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 5e5784ef6f85..050776cb4df8 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -474,6 +474,12 @@ J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ >; }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ + >; + }; }; &wkup_pmx0 { @@ -536,12 +542,6 @@ >; }; - vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { - pinctrl-single,pins = < - J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */ - >; - }; - wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ @@ -1034,6 +1034,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -1045,7 +1046,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index 9e43dcff8ef2..4fea99519113 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -457,6 +457,7 @@ &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; + status = "okay"; }; &davinci_mdio { @@ -469,7 +470,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso index 8583178fa1f3..6869a95c6214 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso @@ -80,6 +80,6 @@ &main_cpsw_port1 { status = "okay"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&main_cpsw_phy0>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 837097751c18..2a7f9c519735 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -552,6 +552,8 @@ "tx4", "tx5", "tx6", "tx7", "rx"; + status = "disabled"; + ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index e0e303da7e15..7baf5764862b 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -228,6 +228,11 @@ }; }; +&audio_refclk1 { + assigned-clocks = <&k3_clks 157 0>; + assigned-clock-parents = <&k3_clks 157 15>; +}; + &cpsw_mac_syscon { bootph-all; }; @@ -388,7 +393,7 @@ }; &cpsw_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&cpsw3g_phy0>; status = "okay"; bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index d57fdd38bdce..873415ec4fa3 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -437,24 +437,6 @@ mux-reg-masks = <0x00 0x3>, /* SERDES0 lane0 select */ <0x10 0x3>; /* SERDES1 lane0 select */ }; - - audio_refclk0: clock@82e0 { - compatible = "ti,am62-audio-refclk"; - reg = <0x82e0 0x4>; - clocks = <&k3_clks 157 0>; - assigned-clocks = <&k3_clks 157 0>; - assigned-clock-parents = <&k3_clks 157 15>; - #clock-cells = <0>; - }; - - audio_refclk1: clock@82e4 { - compatible = "ti,am62-audio-refclk"; - reg = <0x82e4 0x4>; - clocks = <&k3_clks 157 18>; - assigned-clocks = <&k3_clks 157 18>; - assigned-clock-parents = <&k3_clks 157 33>; - #clock-cells = <0>; - }; }; &wkup_conf { diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso index 685305092bd8..22533d678f79 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso @@ -75,5 +75,6 @@ dma-coherent; phys = <&serdes0_pcie1_link>; phy-names = "pcie-phy"; + bootph-all; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi index 419c1a70e028..e50735577737 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi @@ -270,8 +270,8 @@ main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ - J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ + J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ + J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ >; }; @@ -920,7 +920,7 @@ &mcu_cpsw_port1 { status = "okay"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&mcu_phy0>; }; @@ -944,7 +944,7 @@ }; &main_cpsw1_port1 { - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii-id"; phy-handle = <&main_cpsw1_phy0>; status = "okay"; }; @@ -970,6 +970,7 @@ &serdes_refclk { status = "okay"; clock-frequency = <100000000>; + bootph-all; }; &dss { @@ -984,6 +985,14 @@ <&k3_clks 218 22>; }; +&pcie1_ctrl { + bootph-all; +}; + +&serdes_ln_ctrl { + bootph-all; +}; + &serdes0 { status = "okay"; @@ -993,6 +1002,7 @@ #phy-cells = <0>; cdns,phy-type = <PHY_TYPE_PCIE>; resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + bootph-all; }; serdes0_usb_link: phy@3 { diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index e46f7bf52701..dc8e03ae74c8 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -123,6 +123,8 @@ #define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62LX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) |