| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.19
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
|
|
* kvm-arm64/vgic-lr-overflow: (50 commits)
: Support for VGIC LR overflows, courtesy of Marc Zyngier
:
: Address deficiencies in KVM's GIC emulation when a vCPU has more active
: IRQs than can be represented in the VGIC list registers. Sort the AP
: list to prioritize inactive and pending IRQs, potentially spilling
: active IRQs outside of the LRs.
:
: Handle deactivation of IRQs outside of the LRs for both EOImode=0/1,
: which involves special consideration for SPIs being deactivated from a
: different vCPU than the one that acked it.
KVM: arm64: Convert ICH_HCR_EL2_TDIR cap to EARLY_LOCAL_CPU_FEATURE
KVM: arm64: selftests: vgic_irq: Add timer deactivation test
KVM: arm64: selftests: vgic_irq: Add Group-0 enable test
KVM: arm64: selftests: vgic_irq: Add asymmetric SPI deaectivation test
KVM: arm64: selftests: vgic_irq: Perform EOImode==1 deactivation in ack order
KVM: arm64: selftests: vgic_irq: Remove LR-bound limitation
KVM: arm64: selftests: vgic_irq: Exclude timer-controlled interrupts
KVM: arm64: selftests: vgic_irq: Change configuration before enabling interrupt
KVM: arm64: selftests: vgic_irq: Fix GUEST_ASSERT_IAR_EMPTY() helper
KVM: arm64: selftests: gic_v3: Disable Group-0 interrupts by default
KVM: arm64: selftests: gic_v3: Add irq group setting helper
KVM: arm64: GICv2: Always trap GICV_DIR register
KVM: arm64: GICv2: Handle deactivation via GICV_DIR traps
KVM: arm64: GICv2: Handle LR overflow when EOImode==0
KVM: arm64: GICv3: Force exit to sync ICH_HCR_EL2.En
KVM: arm64: GICv3: nv: Plug L1 LR sync into deactivation primitive
KVM: arm64: GICv3: nv: Resync LRs/VMCR/HCR early for better MI emulation
KVM: arm64: GICv3: Avoid broadcast kick on CPUs lacking TDIR
KVM: arm64: GICv3: Handle in-LR deactivation when possible
KVM: arm64: GICv3: Add SPI tracking to handle asymmetric deactivation
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
KVM selftests changes for 6.19:
- Fix a math goof in mmu_stress_test when running on a single-CPU system/VM.
- Forcefully override ARCH from x86_64 to x86 to play nice with specifying
ARCH=x86_64 on the command line.
- Extend a bunch of nested VMX to validate nested SVM as well.
- Add support for LA57 in the core VM_MODE_xxx macro, and add a test to
verify KVM can save/restore nested VMX state when L1 is using 5-level
paging, but L2 is not.
- Clean up the guest paging code in anticipation of sharing the core logic for
nested EPT and nested NPT.
|
|
Make sure G0 is disabled at the point of initialising the GIC.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-42-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Being able to set the group of an interrupt is pretty useful.
Add such a helper.
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/20251120172540.2267180-41-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Use 57-bit addresses with 5-level paging on hardware that supports
LA57. Continue to use 48-bit addresses with 4-level paging on hardware
that doesn't support LA57.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20251028225827.2269128-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
vgic_lpi_stress sends MAPTI and MAPC commands during guest GIC setup to
map interrupt events to ITT entries and collection IDs to
redistributors, respectively.
We have no guarantee that the ITS will finish handling these mapping
commands before the selftest calls KVM_SIGNAL_MSI to inject LPIs to the
guest. If LPIs are injected before ITS mapping completes, the ITS cannot
properly pass the interrupt on to the redistributor.
Fix by adding a SYNC command to the selftests ITS library, then calling
SYNC after ITS mapping to ensure mapping completes before signal_lpi()
writes to GITS_TRANSLATER.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-2-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
The selftests GIC library and tests assume that the
GICR_TYPER.Processor_number associated with a given CPU is the same as
the CPU's selftest index.
Since this assumption is not guaranteed by specification, add an assert
in gicv3_cpu_init() that validates this is true.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-1-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Since GITS_TYPER.PTA == 0, the ITS MAPC command demands a CPU ID,
rather than a physical redistributor address, for its RDbase
command argument.
As such, when MAPC-ing guest ITS collections, vgic_lpi_stress iterates
over CPU IDs in the range [0, nr_cpus), passing them as the RDbase
vcpu_id argument to its_send_mapc_cmd().
However, its_encode_target() in the its_send_mapc_cmd() selftest
handler expects RDbase arguments to be formatted with a 16 bit
offset, as shown by the 16-bit target_addr right shift its implementation:
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16)
At the moment, all CPU IDs passed into its_send_mapc_cmd() have no
offset, therefore becoming 0x0 after the bit shift. Thus, when
vgic_its_cmd_handle_mapc() receives the ITS command in vgic-its.c,
it always interprets the RDbase target CPU as CPU 0. All interrupts
sent to collections will be processed by vCPU 0, which defeats the
purpose of this multi-vCPU test.
Fix by creating procnum_to_rdbase() helper function, which left-shifts
the vCPU parameter received by its_send_mapc_cmd 16 bits before passing
it to its_encode_target for encoding.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://patch.msgid.link/20251020145946.48288-1-mdittgen@amazon.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c402a ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/selftests-6.18:
: .
: KVM/arm64 selftest updates for 6.18:
:
: - Large update to run EL1 selftests at EL2 when possible
: (20250917212044.294760-1-oliver.upton@linux.dev)
:
: - Work around lack of ID_AA64MMFR4_EL1 trapping on CPUs
: without FEAT_FGT
: (20250923173006.467455-1-oliver.upton@linux.dev)
:
: - Additional fixes and cleanups
: (20250920-kvm-arm64-id-aa64isar3-el1-v1-0-1764c1c1c96d@kernel.org)
: .
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Take advantage of VHE to implicitly promote KVM selftests to run at EL2
with only slight modification. Update the smccc_filter test to account
for this now that the EL2-ness of a VM is visible to tests.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Initialize HCR_EL2 such that EL2&0 is considered 'InHost', allowing the
use of (mostly) unmodified EL1 selftests at EL2.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The default vCPU target in KVM selftests is pretty boring in that it
doesn't enable any vCPU features. Expose a helper for getting the
default target to prepare for cramming in more features. Call
KVM_ARM_PREFERRED_TARGET directly from get-reg-list as it needs
fine-grained control over feature flags.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_VHE has the somewhat nice property of implicitly redirecting EL1
register aliases to their corresponding EL2 representations when E2H=1.
Unfortunately, there's no such abstraction for userspace and EL2
registers are always accessed by their canonical encoding.
Introduce a helper that applies EL2 redirections to sysregs and use
aggressive inlining to catch misuse at compile time. Go a little past
the architectural definition for ease of use for test authors (e.g. the
stack pointer).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Start creating a VGICv3 by default unless explicitly opted-out by the
test. While having an interrupt controller is nice, the real benefit
here is clearing a hurdle for EL2 VMs which mandate the presence of a
VGIC.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_v3_setup() has a good bit of sanity checking internally to ensure
that vCPUs have actually been created and match the dimensioning of the
vgic itself. Spin off an unsanitised setup and initialization helper so
vgic initialization can be wired in around a 'default' VM's vCPU
creation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a proper predicate for probing VGICv3 by performing a 'test'
creation of the device on a dummy VM.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_v3_setup() unnecessarily initializes the vgic twice. Keep the
initialization after configuring MMIO frames and get rid of the other.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to compel the default usage of EL2 in selftests, move
kvm_arch_vm_post_create() to library code and expose an opt-in for using
MTE by default.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The ARM64_FEATURE_MASK() macro was a hack introduce whilst the
automatic generation of sysreg encoding was introduced, and was
too unreliable to be entirely trusted.
We are in a better place now, and we could really do without this
macro. Get rid of it altogether.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250817202158.395078-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Use the kernel's canonical $(ARCH) paths instead of the raw target triple
for KVM selftests directories. KVM selftests are quite nearly the only
place in the entire kernel that using the target triple for directories,
tools/testing/selftests/drivers/s390x being the lone holdout.
Using the kernel's preferred nomenclature eliminates the minor, but
annoying, friction of having to translate to KVM's selftests directories,
e.g. for pattern matching, opening files, running selftests, etc.
Opportunsitically delete file comments that reference the full path of the
file, as they are obviously prone to becoming stale, and serve no known
purpose.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
