ports: Make new ports/ sub-directory and move all ports there.

This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.

1 files changed, 0 insertions, 69 deletions

diff --git a/teensy/help.c b/teensy/help.c
deleted file mode 100644
index ebe4bed6b..000000000
--- a/teensy/help.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is part of the MicroPython project, http://micropython.org/
- *
- * The MIT License (MIT)
- *
- * Copyright (c) 2013, 2014 Damien P. George
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "py/builtin.h"
-
-const char *teensy_help_text =
-"Welcome to MicroPython!\n"
-"\n"
-"For online help please visit http://micropython.org/help/.\n"
-"\n"
-"Quick overview of commands for the board:\n"
-"  pyb.info()    -- print some general information\n"
-"  pyb.gc()      -- run the garbage collector\n"
-"  pyb.delay(n)  -- wait for n milliseconds\n"
-"  pyb.Switch()  -- create a switch object\n"
-"                   Switch methods: (), callback(f)\n"
-"  pyb.LED(n)    -- create an LED object for LED n (n=1,2,3,4)\n"
-"                   LED methods: on(), off(), toggle(), intensity(<n>)\n"
-"  pyb.Pin(pin)  -- get a pin, eg pyb.Pin('X1')\n"
-"  pyb.Pin(pin, m, [p]) -- get a pin and configure it for IO mode m, pull mode p\n"
-"                   Pin methods: init(..), value([v]), high(), low()\n"
-"  pyb.ExtInt(pin, m, p, callback) -- create an external interrupt object\n"
-"  pyb.ADC(pin)  -- make an analog object from a pin\n"
-"                   ADC methods: read(), read_timed(buf, freq)\n"
-"  pyb.DAC(port) -- make a DAC object\n"
-"                   DAC methods: triangle(freq), write(n), write_timed(buf, freq)\n"
-"  pyb.RTC()     -- make an RTC object; methods: datetime([val])\n"
-"  pyb.rng()     -- get a 30-bit hardware random number\n"
-"  pyb.Servo(n)  -- create Servo object for servo n (n=1,2,3,4)\n"
-"                   Servo methods: calibration(..), angle([x, [t]]), speed([x, [t]])\n"
-"  pyb.Accel()   -- create an Accelerometer object\n"
-"                   Accelerometer methods: x(), y(), z(), tilt(), filtered_xyz()\n"
-"\n"
-"Pins are numbered X1-X12, X17-X22, Y1-Y12, or by their MCU name\n"
-"Pin IO modes are: pyb.Pin.IN, pyb.Pin.OUT_PP, pyb.Pin.OUT_OD\n"
-"Pin pull modes are: pyb.Pin.PULL_NONE, pyb.Pin.PULL_UP, pyb.Pin.PULL_DOWN\n"
-"Additional serial bus objects: pyb.I2C(n), pyb.SPI(n), pyb.UART(n)\n"
-"\n"
-"Control commands:\n"
-"  CTRL-A        -- on a blank line, enter raw REPL mode\n"
-"  CTRL-B        -- on a blank line, enter normal REPL mode\n"
-"  CTRL-C        -- interrupt a running program\n"
-"  CTRL-D        -- on a blank line, do a soft reset of the board\n"
-"\n"
-"For further help on a specific object, type help(obj)\n"
-;