diff options
Diffstat (limited to 'teensy/help.c')
| -rw-r--r-- | teensy/help.c | 69 |
1 files changed, 0 insertions, 69 deletions
diff --git a/teensy/help.c b/teensy/help.c deleted file mode 100644 index ebe4bed6b..000000000 --- a/teensy/help.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2013, 2014 Damien P. George - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include "py/builtin.h" - -const char *teensy_help_text = -"Welcome to MicroPython!\n" -"\n" -"For online help please visit http://micropython.org/help/.\n" -"\n" -"Quick overview of commands for the board:\n" -" pyb.info() -- print some general information\n" -" pyb.gc() -- run the garbage collector\n" -" pyb.delay(n) -- wait for n milliseconds\n" -" pyb.Switch() -- create a switch object\n" -" Switch methods: (), callback(f)\n" -" pyb.LED(n) -- create an LED object for LED n (n=1,2,3,4)\n" -" LED methods: on(), off(), toggle(), intensity(<n>)\n" -" pyb.Pin(pin) -- get a pin, eg pyb.Pin('X1')\n" -" pyb.Pin(pin, m, [p]) -- get a pin and configure it for IO mode m, pull mode p\n" -" Pin methods: init(..), value([v]), high(), low()\n" -" pyb.ExtInt(pin, m, p, callback) -- create an external interrupt object\n" -" pyb.ADC(pin) -- make an analog object from a pin\n" -" ADC methods: read(), read_timed(buf, freq)\n" -" pyb.DAC(port) -- make a DAC object\n" -" DAC methods: triangle(freq), write(n), write_timed(buf, freq)\n" -" pyb.RTC() -- make an RTC object; methods: datetime([val])\n" -" pyb.rng() -- get a 30-bit hardware random number\n" -" pyb.Servo(n) -- create Servo object for servo n (n=1,2,3,4)\n" -" Servo methods: calibration(..), angle([x, [t]]), speed([x, [t]])\n" -" pyb.Accel() -- create an Accelerometer object\n" -" Accelerometer methods: x(), y(), z(), tilt(), filtered_xyz()\n" -"\n" -"Pins are numbered X1-X12, X17-X22, Y1-Y12, or by their MCU name\n" -"Pin IO modes are: pyb.Pin.IN, pyb.Pin.OUT_PP, pyb.Pin.OUT_OD\n" -"Pin pull modes are: pyb.Pin.PULL_NONE, pyb.Pin.PULL_UP, pyb.Pin.PULL_DOWN\n" -"Additional serial bus objects: pyb.I2C(n), pyb.SPI(n), pyb.UART(n)\n" -"\n" -"Control commands:\n" -" CTRL-A -- on a blank line, enter raw REPL mode\n" -" CTRL-B -- on a blank line, enter normal REPL mode\n" -" CTRL-C -- interrupt a running program\n" -" CTRL-D -- on a blank line, do a soft reset of the board\n" -"\n" -"For further help on a specific object, type help(obj)\n" -; |