| Age | Commit message (Collapse) | Author |
|---|
|
This change makes more readable code diffs when adding new items or
removing old items, while ensuring that lines do not get excessively
long. Some SUBDIRS, PROGRAMS and REGRESS lists are split.
Note that there are a few more REGRESS lists that could be split,
particularly in contrib/.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-Authored-By: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Man Zeng <zengman@halodbtech.com>
Discussion: https://postgr.es/m/DF6HDGB559U5.3MPRFCWPONEAE@jeltef.nl
|
|
Will be used in a subsequent commit, to implement io_method=io_uring. Kept
separate for easier review.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
|
|
Backpatch-through: 13
|
|
Revert a couple of the simplifications done in commit 721856ff24b
because platforms without ln -s, where LN_S='cp -pR', such as MinGW,
required the specific previous incantations.
Reported-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/20240616193448.28@rfd.leadboat.com
|
|
This way, we can fold the list of lock names to occur in
BuiltinTrancheNames instead of having its own separate array. This
saves two lines of code in GetLWTrancheName and some space in
BuiltinTrancheNames, as foreseen in commit 74a730631065, as well as
removing the need for a separate lwlocknames.c file.
We still have to build lwlocknames.h using Perl code, which initially I
wanted to avoid, but it gives us the chance to cross-check
wait_event_names.txt.
Discussion: https://postgr.es/m/202401231025.gbv4nnte5fmm@alvherre.pgsql
|
|
With the makefile rules, the output of genbki.pl was written to
src/backend/catalog/, and then the header files were linked to
src/include/catalog/.
This changes it so that the output files are written directly to
src/include/catalog/. This makes the logic simpler, and it also makes
the behavior consistent with the meson build system. Also, the list
of catalog files is now kept in parallel in
src/include/catalog/{meson.build,Makefile}, while before the makefiles
had it in src/backend/catalog/Makefile.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Discussion: https://www.postgresql.org/message-id/flat/21b74bdc-183d-4dd5-9c27-9378d178f459@eisentraut.org
|
|
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
|
|
Both lwlocknames.txt and wait_event_names.txt contain a list of all
the predefined LWLocks, i.e., those with predefined positions
within MainLWLockArray. It is easy to miss one or the other,
especially since the list in wait_event_names.txt omits the "Lock"
suffix from all the LWLock wait events. This commit adds a cross-
check of these lists to the script that generates lwlocknames.h.
If the lists do not match exactly, building will fail.
Suggested-by: Robert Haas
Reviewed-by: Robert Haas, Michael Paquier, Bertrand Drouvot
Discussion: https://postgr.es/m/20240102173120.GA1061678%40nathanxps13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
|
|
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
|
|
The documentation and the code is generated automatically from a new
file called wait_event_names.txt, formatted in sections dedicated to
each wait event class (Timeout, Lock, IO, etc.) with three tab-separated
fields:
- C symbol in enums
- Format in the system views
- Description in the docs
Using this approach has several advantages, as we have proved to be
rather bad in maintaining this area of the tree across the years:
- The order of each item in the documentation and the code, which should
be alphabetical, has become incorrect multiple times, and the script
generating the code and documentation has a few rules to enforce that,
making the maintenance a no-brainer.
- Some wait events were added to the code, but not documented, so this
cannot be missed now.
- The order of the tables for each wait event class is enforced in the
documentation (the input .txt file does so as well for clarity, though
this is not mandatory).
- Less code, shaving 1.2k lines from the tree, with 1/3 of the savings
coming from the code, the rest from the documentation.
The wait event types "Lock" and "LWLock" still have their own code path
for their code, hence only the documentation is created for them. These
classes are listed with a special marker called WAIT_EVENT_DOCONLY in
the input file.
Adding a new wait event now requires only an update of
wait_event_names.txt, with "Lock" and "LWLock" treated as exceptions.
This commit has been tested with configure/Makefile, the CI and VPATH
build. clean, distclean and maintainer-clean were working fine.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
|
|
We had left it icon-free since users won't achieve much by opening it
from Windows Explorer. Subsequent to that decision, Task Manager
started to show the icon. That shifts the balance in favor of attaching
the icon, so do so. No back-patch, but make this late addition to v16.
Reviewed by Andres Freund and Magnus Hagander.
Discussion: https://postgr.es/m/20230608014507.GD1334487@rfd.leadboat.com
|
|
A new callback named startup_cb, called shortly after a module is
loaded, is added. This makes possible the initialization of any
additional state data required by a module. This initial state data can
be saved in a ArchiveModuleState, that is now passed down to all the
callbacks that can be defined in a module. With this design, it is
possible to have a per-module state, aimed at opening the door to the
support of more than one archive module.
The initialization of the callbacks is changed so as
_PG_archive_module_init() does not anymore give in input a
ArchiveModuleCallbacks that a module has to fill in with callback
definitions. Instead, a module now needs to return a const
ArchiveModuleCallbacks.
All the structure and callback definitions of archive modules are moved
into their own header, named archive_module.h, from pgarch.h.
Command-based archiving follows the same line, with a new set of files
named shell_archive.{c,h}.
There are a few more items that are under discussion to improve the
design of archive modules, like the fact that basic_archive calls
sigsetjmp() by itself to define its own error handling flow. These will
be adjusted later, the changes done here cover already a good portion
of what has been discussed.
Any modules created for v15 will need to be adjusted to this new
design.
Author: Nathan Bossart
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20230130194810.6fztfgbn32e7qarj@awork3.anarazel.de
|
|
This has long been deprecated. Some of the build systems didn't even
install it.
Also remove man page.
Reviewed-by: Karl O. Pinc <kop@karlpinc.com>
Discussion: https://www.postgresql.org/message-id/flat/ece84b69-8f94-8b88-925f-64207cb3a2f0@enterprisedb.com
|
|
Backpatch-through: 11
|
|
Previously export_dynamic was set in src/makefiles/Makefile.$port. For solaris
this required exporting with_gnu_ld. The determination of with_gnu_ld would be
nontrivial to copy for meson PGXS compatibility. It's also nice to delete
libtool.m4.
This uses -Wl,--export-dynamic on all platforms, previously all platforms but
FreeBSD used -Wl,-E. The likelihood of a name conflict seems lower with the
longer spelling.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
The only use of $(LD) in Makefiles is for AIX, to generate the export file for
the backend. We only support the system linker on AIX and we already hardcode
the path to a number of other binaries. Removing LD substitution will simplify
the upcoming meson PGXS compatibility.
While at it, add a comment why -r is used.
A subsequent commit will remove the determination of LD from configure as
well.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
|
|
This header is semi-private, being used only in files related to
raw parsing, so move to the backend directory where those files
live. This allows removal of Makefile rules that symlink gram.h to
src/include/parser, since gramparse.h can now include gram.h from
within the same directory. This has the side-effect of no longer
installing gram.h and gramparse.h, but there doesn't seem to be a
good reason to continue doing so.
Per suggestion from Andres Freund and Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/20220904181759.px6uosll6zbxcum5%40awork3.anarazel.de
|
|
Oversight in dac048f71e
|
|
Oversight in dac048f71e
|
|
The proposed Meson build system will need a way to ignore certain
generated files in order to coexist with the autoconf build system,
and C files generated by Flex which are #include'd into .y files make
this more difficult. In similar vein to 72b1e3a21, arrange for all Flex
C files to compile to their own .o targets.
Reviewed by Andres Freund
Discussion: https://www.postgresql.org/message-id/20220810171935.7k5zgnjwqzalzmtm%40awork3.anarazel.de
Discussion: https://www.postgresql.org/message-id/CAFBsxsF8Gc2StS3haXofshHCzqNMRXiSxvQEYGwnFsTmsdwNeg@mail.gmail.com
|
|
Discussion: https://postgr.es/m/20220820174213.d574qde4ptwdzoqz@awork3.anarazel.de
|
|
Reviewed by David Steele and Justin Pryzby
Discussion: http://postgr.es/m/CA+TgmoafqboATDSoXHz8VLrSwK_MDhjthK4hEpYjqf9_1Fmczw%40mail.gmail.com
|
|
This lead to choosing the aix4.1 specific way of building the export file for
the backend, rather than the modern one.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/20220807182707.gi7pirwbz5etprfo@awork3.anarazel.de
|
|
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220807012914.ydz73yte6j3coulo@awork3.anarazel.de
|
|
Add a script to automatically generate the node support functions
(copy, equal, out, and read, as well as the node tags enum) from the
struct definitions.
For each of the four node support files, it creates two include files,
e.g., copyfuncs.funcs.c and copyfuncs.switch.c, to include in the main
file. All the scaffolding of the main file stays in place.
I have tried to mostly make the coverage of the output match what is
currently there. For example, one could now do out/read coverage of
utility statement nodes, but I have manually excluded those for now.
The reason is mainly that it's easier to diff the before and after,
and adding a bunch of stuff like this might require a separate
analysis and review.
Subtyping (TidScan -> Scan) is supported.
For the hard cases, you can just write a manual function and exclude
generating one. For the not so hard cases, there is a way of
annotating struct fields to get special behaviors. For example,
pg_node_attr(equal_ignore) has the field ignored in equal functions.
(In this patch, I have only ifdef'ed out the code to could be removed,
mainly so that it won't constantly have merge conflicts. It will be
deleted in a separate patch. All the code comments that are worth
keeping from those sections have already been moved to the header
files where the structs are defined.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/c1097590-a6a4-486a-64b1-e1f9cc0533ce%40enterprisedb.com
|
|
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153367cdab278738ee4aebbfd158e0546 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4bf9f5f65529dfa4c8282abb734dd454.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b0dadd1068a03938e4b8ff562587ccc) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Replace the Perl code previously used to generate specialized sort
functions with sort_template.h.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGJ2-eaDqAum5bxhpMNhvuJmRDZxB_Tow0n-gse%2BHG0Yig%40mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
The patch needs test cases, reorganization, and cfbot testing.
Technically reverts commits 5c31afc49d..e35b2bad1a (exclusive/inclusive)
and 08db7c63f3..ccbe34139b.
Reported-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/E1ktAAG-0002V2-VB@gemulon.postgresql.org
|
|
Previously I used Makefile functions.
Backpatch-through: master
|
|
Scripts are passphrase, direct, AWS, and two Yubikey ones.
Backpatch-through: master
|
|
This adds a key management system that stores (currently) two data
encryption keys of length 128, 192, or 256 bits. The data keys are
AES256 encrypted using a key encryption key, and validated via GCM
cipher mode. A command to obtain the key encryption key must be
specified at initdb time, and will be run at every database server
start. New parameters allow a file descriptor open to the terminal to
be passed. pg_upgrade support has also been added.
Discussion: https://postgr.es/m/CA+fd4k7q5o6Nc_AaX6BcYM9yqTbC6_pnH-6nSD=54Zp6NBQTCQ@mail.gmail.com
Discussion: https://postgr.es/m/20201202213814.GG20285@momjian.us
Author: Masahiko Sawada, me, Stephen Frost
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
|
|
Jsonpath grammar and scanner are both quite small. It doesn't worth complexity
to compile them separately. This commit makes grammar and scanner be compiled
at once. Therefore, jsonpath_gram.h and jsonpath_gram.h are no longer needed.
This commit also does some reorganization of code in jsonpath_gram.y.
Discussion: https://postgr.es/m/d47b2023-3ecb-5f04-d253-d557547cf74f%402ndQuadrant.com
|
|
Reported-by: Jeff Janes, Tom Lane
Discussion: https://postgr.es/m/CAMkU%3D1w1qBvoW82ZTFpAKae027R-2OHw-m6ALe0VQRNAFueBVA%40mail.gmail.com
|
|
SQL 2016 standards among other things contains set of SQL/JSON features for
JSON processing inside of relational database. The core of SQL/JSON is JSON
path language, allowing access parts of JSON documents and make computations
over them. This commit implements partial support JSON path language as
separate datatype called "jsonpath". The implementation is partial because
it's lacking datetime support and suppression of numeric errors. Missing
features will be added later by separate commits.
Support of SQL/JSON features requires implementation of separate nodes, and it
will be considered in subsequent patches. This commit includes following
set of plain functions, allowing to execute jsonpath over jsonb values:
* jsonb_path_exists(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_match(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query_array(jsonb, jsonpath[, jsonb, bool]).
* jsonb_path_query_first(jsonb, jsonpath[, jsonb, bool]).
This commit also implements "jsonb @? jsonpath" and "jsonb @@ jsonpath", which
are wrappers over jsonpath_exists(jsonb, jsonpath) and jsonpath_predicate(jsonb,
jsonpath) correspondingly. These operators will have an index support
(implemented in subsequent patches).
Catversion bumped, to add new functions and operators.
Code was written by Nikita Glukhov and Teodor Sigaev, revised by me.
Documentation was written by Oleg Bartunov and Liudmila Mantrova. The work
was inspired by Oleg Bartunov.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Nikita Glukhov, Teodor Sigaev, Alexander Korotkov, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Tomas Vondra, Andrew Dunstan, Pavel Stehule, Alexander Korotkov
|
|
It's important for link commands to list *.o input files before -l
switches for libraries, as library code may not get pulled into the link
unless referenced by an earlier command-line entry. This is certainly
necessary for static libraries (.a style). Apparently on some platforms
it is also necessary for shared libraries, as reported by Donald Dong.
We often put -l switches for within-tree libraries into LDFLAGS, meaning
that link commands that list *.o files after LDFLAGS are hazardous.
Most of our link commands got this right, but a few did not. In
particular, places that relied on gmake's default implicit link rule
failed, because that puts LDFLAGS first. Fix that by overriding the
built-in rule with our own. The implicit link rules in
src/makefiles/Makefile.* for single-.o-file shared libraries mostly
got this wrong too, so fix them. I also changed the link rules for the
backend and a couple of other places for consistency, even though they
are not (currently) at risk because they aren't adding any -l switches
to LDFLAGS.
Arguably, the real problem here is that we're abusing LDFLAGS by
putting -l switches in it and we should stop doing that. But changing
that would be quite invasive, so I'm not eager to do so.
Perhaps this is a candidate for back-patching, but so far it seems
that problems can only be exhibited in test code we don't normally
build, and at least some of the problems are new in HEAD anyway.
So I'll refrain for now.
Donald Dong and Tom Lane
Discussion: https://postgr.es/m/CAKABAquXn-BF-vBeRZxhzvPyfMqgGuc74p8BmQZyCFDpyROBJQ@mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
recovery.conf settings are now set in postgresql.conf (or other GUC
sources). Currently, all the affected settings are PGC_POSTMASTER;
this could be refined in the future case by case.
Recovery is now initiated by a file recovery.signal. Standby mode is
initiated by a file standby.signal. The standby_mode setting is
gone. If a recovery.conf file is found, an error is issued.
The trigger_file setting has been renamed to promote_trigger_file as
part of the move.
The documentation chapter "Recovery Configuration" has been integrated
into "Server Configuration".
pg_basebackup -R now appends settings to postgresql.auto.conf and
creates a standby.signal file.
Author: Fujii Masao <masao.fujii@gmail.com>
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Abhijit Menon-Sen <ams@2ndquadrant.com>
Author: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/607741529606767@web3g.yandex.ru/
|
|
Nowadays, all platforms except Windows and older HP-UX have standard
dlopen() support. So having a separate implementation per platform
under src/backend/port/dynloader/ is a bit excessive. Instead, treat
dlopen() like other library functions that happen to be missing
sometimes and put a replacement implementation under src/port/.
Discussion: https://www.postgresql.org/message-id/flat/e11a49cb-570a-60b7-707d-7084c8de0e61%402ndquadrant.com#54e735ae37476a121abb4e33c2549b03
|
|
Make these rules look more like the ones associated with genbki.pl,
to wit:
* Use a stamp file to record when we last ran the script, instead of
relying on the timestamps of the individual output files.
* Take the knowledge out of backend/Makefile and put it in utils/Makefile
where it belongs. I moved down the handling of errcodes.h and probes.h
too, although those continue to be built by separate processes.
In itself, this is just much-needed cleanup with little practical effect.
However, by decoupling these makefile rules from the timestamps of the
generated header files, we open the door to not advancing those timestamps
unnecessarily, which will be taken advantage of by the next commit.
msvc/Solution.pm should be taught to do things similarly, but I'll leave
that for another commit.
Discussion: https://postgr.es/m/16925.1525376229@sss.pgh.pa.us
|
|
This code is evidently allocating memory and thus confusing matters
even more. Let's see whether we can learn anything with
just VirtualQuery.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
|
|
This morning's results from buildfarm member dory make it pretty
clear that something is getting mapped into the just-freed space,
but not what that something is. Replace my minimalistic probes
with a full dump of the process address space and module space,
based on Noah's work at
<20170403065106.GA2624300%40tornado.leadboat.com>
This is all (probably) to get reverted once we have fixed the
problem, but for now we need information.
Discussion: https://postgr.es/m/25495.1524517820@sss.pgh.pa.us
|
|
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Discussion: https://postgr.es/m/E1f5FAB-0006LU-MB@gemulon.postgresql.org
|
|
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Discussion: https://postgr.es/m/CAJVSVGWO48JbbwXkJz_yBFyGYW-M9YWxnPdxJBUosDC9ou_F0Q@mail.gmail.com
|
|
Add a new module backend/partitioning/partprune.c, implementing a more
sophisticated algorithm for partition pruning. The new module uses each
partition's "boundinfo" for pruning instead of constraint exclusion,
based on an idea proposed by Robert Haas of a "pruning program": a list
of steps generated from the query quals which are run iteratively to
obtain a list of partitions that must be scanned in order to satisfy
those quals.
At present, this targets planner-time partition pruning, but there exist
further patches to apply partition pruning at execution time as well.
This commit also moves some definitions from include/catalog/partition.h
to a new file include/partitioning/partbounds.h, in an attempt to
rationalize partitioning related code.
Authors: Amit Langote, David Rowley, Dilip Kumar
Reviewers: Robert Haas, Kyotaro Horiguchi, Ashutosh Bapat, Jesper Pedersen.
Discussion: https://postgr.es/m/098b9c71-1915-1a2a-8d52-1a7a50ce79e8@lab.ntt.co.jp
|
