| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 14
|
|
The idea is to encourage more the use of these new routines across the
tree, as these offer stronger type safety guarantees than palloc().
This batch of changes includes most of the trivial changes suggested by
the author for src/backend/.
A total of 334 files are updated here. Among these files, 48 of them
have their build change slightly; these are caused by line number
changes as the new allocation formulas are simpler, shaving around 100
lines of code in total.
Similar work has been done in 0c3c5c3b06a3 and 31d3847a37be.
Author: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/ad0748d4-3080-436e-b0bc-ac8f86a3466a@gmail.com
|
|
Remove a bunch of PG_TRY constructs, de-volatilize related
variables, remove some PQclear calls in error paths.
Aside from making the code simpler and shorter, this should
provide some marginal performance gains.
For ease of review, I did not re-indent code within the removed
PG_TRY constructs. That'll be done in a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
|
|
Commit 112faf1378e introduced a translation marker in libpq-be-fe-helpers.h,
but this caused build failures on some platforms—such as the one reported
by buildfarm member indri—due to linker issues with dblink. This is the same
problem previously addressed in commit 213c959a294.
To fix the issue, this commit removes the translation marker from
libpq-be-fe-helpers.h, following the approach used in 213c959a294.
It also removes the associated gettext_noop() calls added in commit
112faf1378e, as they are no longer needed.
While reviewing this, a gettext_noop() call was also found in
contrib/basic_archive. Since contrib modules don't support translation,
this call has been removed as well.
Per buildfarm member indri.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0e6299d9-608a-4ffa-aeb1-40cb8a99000b@oss.nttdata.com
|
|
Previously, NOTICE, WARNING, and similar messages received from remote
servers over replication, postgres_fdw, or dblink connections were printed
directly to stderr on the local server (e.g., the subscriber). As a result,
these messages lacked log prefixes (e.g., timestamp), making them harder
to trace and correlate with other log entries.
This commit addresses the issue by introducing a custom notice receiver
for replication, postgres_fdw, and dblink connections. These messages
are now logged via ereport(), ensuring they appear in the logs with proper
formatting and context, which improves clarity and aids in debugging.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CALDaNm2xsHpWRtLm-VL_HJCsaE3+1Y_n-jDEAr3-suxVqc3xoQ@mail.gmail.com
|
|
This commit standardizes the output format for LSNs to ensure consistent
representation across various tools and messages. Previously, LSNs were
inconsistently printed as `%X/%X` in some contexts, while others used
zero-padding. This often led to confusion when comparing.
To address this, the LSN format is now uniformly set to `%X/%08X`,
ensuring the lower 32-bit part is always zero-padded to eight
hexadecimal digits.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/ME0P300MB0445CA53CA0E4B8C1879AF84B641A@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
|
|
Similar to 8461424fd, here we adjust a few new locations which were not
using the most suitable appendStringInfo* function for the intended
purpose.
Author: David Rowley <drowleyml@gmail.com
Discussion: https://postgr.es/m/CAApHDvqJnNjueb=Eoj8K+8n0g7nj_AcPWSiCj5RNV4fDejAfqA@mail.gmail.com
|
|
This gets rid of the bespoken ProcessWalRcvInterrupts() function,
which lets walreceiver terminate at any CHECK_FOR_INTERRUPTS() call.
And it's less code anyway.
We can now use the standard libpqsrv_connect_params() libpq wrapper
from libpq-be-fe-helpers.h, removing more code. We attempted to do
that earlier already in commit 728f86fec6, but that was reverted
because it didn't call ProcessWalRcvInterrupts() and therefore didn't
react to shutdown requests. Now that ProcessWalRcvInterrupts() is
gone, it works. As stated in that commit, this also leads to
libpqwalreceiver reserving file descriptors for libpq conncetions,
which is nice.
Author: Andres Freund <andres@anarazel.de> (the earlier commit)
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Yura Sokolov <y.sokolov@postgrespro.ru>
|
|
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
Was supposed to check the length of the array, but was checking its
size in bytes.
Author: Jacob Brazeal <jacob.brazeal@gmail.com>
Discussion: https://www.postgresql.org/message-id/CA%2BCOZaA_9afJxj9ZuO73U5P7WXP%2BZM9NGnZvTDCmBFz0FGP%2BwA@mail.gmail.com
|
|
Backpatch-through: 13
|
|
This is in preparation for replacing Latches with a new abstraction.
That's still work in progress, but this seems a little tidier anyway,
so let's get this refactoring out of the way already.
Discussion: https://www.postgresql.org/message-id/391abe21-413e-4d91-a650-b663af49500c%40iki.fi
|
|
The two_phase option is controlled by both the publisher (as a slot
option) and the subscriber (as a subscription option), so the slot option
must also be modified.
Changing the 'two_phase' option for a subscription from 'true' to 'false'
is permitted only when there are no pending prepared transactions
corresponding to that subscription. Otherwise, the changes of already
prepared transactions can be replicated again along with their corresponding
commit leading to duplicate data or errors.
To avoid data loss, the 'two_phase' option for a subscription can only be
changed from 'false' to 'true' once the initial data synchronization is
completed. Therefore this is performed later by the logical replication worker.
Author: Hayato Kuroda, Ajin Cherian, Amit Kapila
Reviewed-by: Peter Smith, Hou Zhijie, Amit Kapila, Vitaly Davydov, Vignesh C
Discussion: https://postgr.es/m/8fab8-65d74c80-1-2f28e880@39088166
|
|
Previously, the comment incorrectly stated that libpqrcv_check_conninfo()
returns true or false based on the connection string check.
However, this function actually has a void return type and
raises an error if the check fails.
Author: Rintaro Ikeda
Reviewed-by: Jelte Fennema-Nio, Fujii Masao
Discussion: https://postgr.es/m/6a1ca81b27fec4da0ccdfaaaec787982@oss.nttdata.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 17 development.
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
|
|
This patch generalizes libpq's existing single-row mode to allow
individual partial-result PGresults to contain up to N rows, rather
than always one row. This reduces malloc overhead compared to plain
single-row mode, and it is very useful for psql's FETCH_COUNT feature,
since otherwise we'd have to add code (and cycles) to either merge
single-row PGresults into a bigger one or teach psql's
results-printing logic to accept arrays of PGresults.
To avoid API breakage, PQsetSingleRowMode() remains the same, and we
add a new function PQsetChunkedRowsMode() to invoke the more general
case. Also, PGresults obtained the old way continue to carry the
PGRES_SINGLE_TUPLE status code, while if PQsetChunkedRowsMode() is
used then their status code is PGRES_TUPLES_CHUNK. The underlying
logic is the same either way, though.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
|
|
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
|
|
Ensure to set always-secure search path for both local and remote
connections during slot synchronization, so that malicious users can't
redirect user code (e.g. operators).
In the passing, improve the name of define, remove spurious return
statement, and a minor change in one of the comments.
Author: Bertrand Drouvot and Shveta Malik
Reviewed-by: Amit Kapila, Peter Smith
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Discussion: https://postgr.es/m/ZdcejBDCr+wlVGnO@ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://postgr.es/m/CAJpy0uBNP=nrkNJkJSfF=jSocEh8vU2Owa8Rtpi=63fG=SvfVQ@mail.gmail.com
|
|
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
|
|
This patch provides support for regular (non-replication) connections in
libpqrcv_connect(). This can be used to execute SQL statements on the
primary server without starting a walsender.
A new API libpqrcv_get_dbname_from_conninfo() is also added to extract the
database name from the given connection-info.
Note that this patch doesn't change any existing functionality but later
patches implementing the slot synchronization will use this functionality
to connect to the primary server to fetch required slot information.
Author: Shveta Malik, Hou Zhijie, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
|
|
This commit implements a new replication command called
ALTER_REPLICATION_SLOT and a corresponding walreceiver API function named
walrcv_alter_slot. Additionally, the CREATE_REPLICATION_SLOT command has
been extended to support the failover option.
These new additions allow the modification of the failover property of a
replication slot on the publisher. A subsequent commit will make use of
these commands in subscription commands and will add the tests as well to
cover the functionality added/changed by this commit.
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda, Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
|
|
This reverts commit 728f86fec65537eade8d9e751961782ddb527934.
The signal handling was a few bricks shy of a load in that commit,
which made the walreceiver non-responsive to SIGTERM while it was
waiting for the connection to be established. That prevented a standby
from being promoted.
Since it was non-essential refactoring, let's revert it to make v16
work the same as earlier releases. I reverted it in 'master' too, to
keep the branches in sync. The refactoring was a good idea as such,
but it needs a bit more work. Once we have developed a complete patch
with this issue fixed, let's re-apply that to 'master'.
Reported-by: Kyotaro Horiguchi
Backpatch-through: 16
Discussion: https://www.postgresql.org/message-id/20231231.200741.1078989336605759878.horikyota.ntt@gmail.com
|
|
Introduced in commit c3afe8cf5a.
Discussion: https://postgr.es/m/066a65233d3cb4ea27a9e0778d2f1d0dc764b222.camel@j-davis.com
Reviewed-by: Nathan Bossart, Tom Lane
Backpatch-through: 16
|
|
A superuser may create a subscription with password_required=true, but
which uses a connection string without a password.
Previously, if the owner of such a subscription was changed to a
non-superuser, the non-superuser was able to utilize a password from
another source (like a password file or the PGPASSWORD environment
variable), which should not have been allowed.
This commit adds a step to re-validate the connection string before
connecting.
Reported-by: Jeff Davis
Author: Vignesh C
Reviewed-by: Peter Smith, Robert Haas, Amit Kapila
Discussion: https://www.postgresql.org/message-id/flat/e5892973ae2a80a1a3e0266806640dae3c428100.camel%40j-davis.com
Backpatch-through: 16
|
|
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these. Use them in postgres_fdw,
replacing a local implementation from which the libpqsrv implementation
derives. This is a bug fix for dblink. Code inspection identified the
bug at least thirteen years ago, but user complaints have not appeared.
Hence, no back-patch for now.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Commit 98e675ed7af accidentally mistyped IDENTIFY_SYSTEM as
IDENTIFY_SERVER. Backpatch to all supported branches.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/68138521-5345-8780-4390-1474afdcba1f@gmail.com
|
|
When preparing commit 98e675ed7af I accidentally forgot to run
pgindent, which did produce a diff. Fix by adding the required
whitespace per the koel buildfarm failure.
|
|
Commit 5a991ef8692e accidentally reversed the order of the tuples
and fields parameters, making the error message incorrectly refer
to 3 tuples with 1 field when IDENTIFY_SYSTEM returns 1 tuple and
3 or 4 fields. Fix by changing the order of the parameters. This
also adds a comment describing why we check for < 3 when postgres
since 9.4 has been sending 4 fields.
Backpatch all the way since the bug is almost a decade old.
Author: Tomonari Katsumata <t.katsumata1122@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: #18224
Backpatch-through: v12
|
|
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
|
|
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
|
This role can be granted to non-superusers to allow them to issue
CREATE SUBSCRIPTION. The non-superuser must additionally have CREATE
permissions on the database in which the subscription is to be
created.
Most forms of ALTER SUBSCRIPTION, including ALTER SUBSCRIPTION .. SKIP,
now require only that the role performing the operation own the
subscription, or inherit the privileges of the owner. However, to
use ALTER SUBSCRIPTION ... RENAME or ALTER SUBSCRIPTION ... OWNER TO,
you also need CREATE permission on the database. This is similar to
what we do for schemas. To change the owner of a schema, you must also
have permission to SET ROLE to the new owner, similar to what we do
for other object types.
Non-superusers are required to specify a password for authentication
and the remote side must use the password, similar to what is required
for postgres_fdw and dblink. A superuser who wants a non-superuser to
own a subscription that does not rely on password authentication may
set the new password_required=false property on that subscription. A
non-superuser may not set password_required=false and may not modify a
subscription that already has password_required=false.
This new password_required subscription property works much like the
eponymous postgres_fdw property. In both cases, the actual semantics
are that a password is not required if either (1) the property is set
to false or (2) the relevant user is the superuser.
Patch by me, reviewed by Andres Freund, Jeff Davis, Mark Dilger,
and Stephen Frost (but some of those people did not fully endorse
all of the decisions that the patch makes).
Discussion: http://postgr.es/m/CA+TgmoaDH=0Xj7OBiQnsHTKcF2c4L+=gzPBUKSJLh8zed2_+Dg@mail.gmail.com
|
|
In contrast to the changes to dblink and postgres_fdw, this does not fix a
bug, as libpqwalreceiver did already process interrupts.
Besides reducing code duplication, the conversion leads to libpqwalreceiver
now using reserving file descriptors for libpq connections. While not strictly
required for the use in walreceiver, we are also using libpqwalreceiver for
logical replication, where it does seem more important.
Even if we eventually decide to backpatch the prior commits, there'd be no
need to backpatch this commit, due to not fixing an active bug.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
|
|
When libpqrcv_connect (also known as walrcv_connect()) failed, it leaked the
libpq connection. In most paths that's fairly harmless, as the calling process
will exit soon after. But e.g. CREATE SUBSCRIPTION could lead to a somewhat
longer lived leak.
Fix by releasing resources, including the libpq connection, on error.
Add a test exercising the error code path. To make it reliable and safe, the
test tries to connect to port=-1, which happens to fail during connection
establishment, rather than during connection string parsing.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20230121011237.q52apbvlarfv6jm6@awork3.anarazel.de
Backpatch: 11-
|
|
Currently, for large transactions, the publisher sends the data in
multiple streams (changes divided into chunks depending upon
logical_decoding_work_mem), and then on the subscriber-side, the apply
worker writes the changes into temporary files and once it receives the
commit, it reads from those files and applies the entire transaction. To
improve the performance of such transactions, we can instead allow them to
be applied via parallel workers.
In this approach, we assign a new parallel apply worker (if available) as
soon as the xact's first stream is received and the leader apply worker
will send changes to this new worker via shared memory. The parallel apply
worker will directly apply the change instead of writing it to temporary
files. However, if the leader apply worker times out while attempting to
send a message to the parallel apply worker, it will switch to
"partial serialize" mode - in this mode, the leader serializes all
remaining changes to a file and notifies the parallel apply workers to
read and apply them at the end of the transaction. We use a non-blocking
way to send the messages from the leader apply worker to the parallel
apply to avoid deadlocks. We keep this parallel apply assigned till the
transaction commit is received and also wait for the worker to finish at
commit. This preserves commit ordering and avoid writing to and reading
from files in most cases. We still need to spill if there is no worker
available.
This patch also extends the SUBSCRIPTION 'streaming' parameter so that the
user can control whether to apply the streaming transaction in a parallel
apply worker or spill the change to disk. The user can set the streaming
parameter to 'on/off', or 'parallel'. The parameter value 'parallel' means
the streaming will be applied via a parallel apply worker, if available.
The parameter value 'on' means the streaming transaction will be spilled
to disk. The default value is 'off' (same as current behaviour).
In addition, the patch extends the logical replication STREAM_ABORT
message so that abort_lsn and abort_time can also be sent which can be
used to update the replication origin in parallel apply worker when the
streaming transaction is aborted. Because this message extension is needed
to support parallel streaming, parallel streaming is not supported for
publications on servers < PG16.
Author: Hou Zhijie, Wang wei, Amit Kapila with design inputs from Sawada Masahiko
Reviewed-by: Sawada Masahiko, Peter Smith, Dilip Kumar, Shi yu, Kuroda Hayato, Shveta Mallik
Discussion: https://postgr.es/m/CAA4eK1+wyN6zpaHUkCLorEWNx75MG0xhMwcFhvjqm2KURZEAGw@mail.gmail.com
|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net
|
|
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
PQfreemem() just calls free(), and the latter already checks for null
pointers.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/cf26e970-8e92-59f1-247a-aa265235075b%40enterprisedb.com
|
|
We now require that compilers support this, and it makes the code easier
to trace, so change it. I'm fixated on this particular struct because
I've had to navigate around it a number of times, but there are others
elsewhere that could use the same treatment.
Discussion: https://postgr.es/m/20220810140300.ixhbmm4svo5yypv6@alvherre.pgsql
|
|
This patch adds a new SUBSCRIPTION parameter "origin". It specifies
whether the subscription will request the publisher to only send changes
that don't have an origin or send changes regardless of origin. Setting it
to "none" means that the subscription will request the publisher to only
send changes that have no origin associated. Setting it to "any" means
that the publisher sends changes regardless of their origin. The default
is "any".
Usage:
CREATE SUBSCRIPTION sub1 CONNECTION 'dbname=postgres port=9999'
PUBLICATION pub1 WITH (origin = none);
This can be used to avoid loops (infinite replication of the same data)
among replication nodes.
This feature allows filtering only the replication data originating from
WAL but for initial sync (initial copy of table data) we don't have such a
facility as we can only distinguish the data based on origin from WAL. As
a follow-up patch, we are planning to forbid the initial sync if the
origin is specified as none and we notice that the publication tables were
also replicated from other publishers to avoid duplicate data or loops.
We forbid to allow creating origin with names 'none' and 'any' to avoid
confusion with the same name options.
Author: Vignesh C, Amit Kapila
Reviewed-By: Peter Smith, Amit Kapila, Dilip Kumar, Shi yu, Ashutosh Bapat, Hayato Kuroda
Discussion: https://postgr.es/m/CALDaNm0gwjY_4HFxvvty01BOT01q_fJLKQ3pWP9=9orqubhjcQ@mail.gmail.com
|
|
The prior commit declared them centrally.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
|
|
Backpatch-through: 10
|
|
In walreceiver, set the publisher's relevant GUCs (datestyle,
intervalstyle, extra_float_digits) to the same values that pg_dump uses,
and for the same reason: we need the output to be read the same way
regardless of the receiver's settings. Without this, it's possible
for subscribers to misinterpret transmitted values.
Although this is clearly a bug fix, it's not without downsides:
subscribers that are storing values into some other datatype, such as
text, could get different results than before, and perhaps be unhappy
about that. Given the lack of previous complaints, it seems best
to change this only in HEAD, and to call it out as an incompatible
change in v15.
Japin Li, per report from Sadhuprasad Patro
Discussion: https://postgr.es/m/CAFF0-CF=D7pc6st-3A9f1JnOt0qmc+BcBPVzD6fLYisKyAjkGA@mail.gmail.com
|
|
Like BASE_BACKUP, CREATE_REPLICATION_SLOT has historically used a
hard-coded syntax. To improve future extensibility, adopt a flexible
options syntax here, too.
In the new syntax, instead of three mutually exclusive options
EXPORT_SNAPSHOT, USE_SNAPSHOT, and NOEXPORT_SNAPSHOT, there is now a single
SNAPSHOT option with three possible values: 'export', 'use', and 'nothing'.
This commit does not remove support for the old syntax. It just adds
the new one as an additional option, makes pg_receivewal,
pg_recvlogical, and walreceiver processes use it.
Patch by me, reviewed by Fabien Coelho, Sergei Kornilov, and
Fujii Masao.
Discussion: http://postgr.es/m/CA+TgmobAczXDRO_Gr2euo_TxgzaH1JxbNxvFx=HYvBinefNH8Q@mail.gmail.com
Discussion: http://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
|
|
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
|
|
I started out with the goal of reporting ERRCODE_CONNECTION_FAILURE
when walrcv_connect() fails, but as I looked around I realized that
whoever wrote this code was of the opinion that errcodes are purely
optional. That's not my understanding of our project policy. Hence,
make sure that an errcode is provided in each ereport that (a) is
ERROR or higher level and (b) isn't arguably an internal logic error.
Also fix some very dubious existing errcode assignments.
While this is not per policy, it's also largely cosmetic, since few
of these cases could get reported to applications. So I don't
feel a need to back-patch.
Discussion: https://postgr.es/m/2189704.1623512522@sss.pgh.pa.us
|
|
We leaked the error report from PQconninfoParse, when there was
one. It seems unlikely that real usage patterns would repeat
the failure often enough to create serious bloat, but let's
back-patch anyway to keep the code similar in all branches.
Found via valgrind testing.
Back-patch to v10 where this code was added.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
|
